| Age | Commit message (Collapse) | Author |
|---|
|
In preparation for generalizing the nested dirty logging test, checking
if either EPT or NPT is enabled will be needed. To avoid needing to gate
the kvm_cpu_has_ept() call by the CPU type, make sure the function
returns false if VMX is not available instead of trying to read VMX-only
MSRs.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that the functions are no longer VMX-specific, move them to
processor.c. Do a minor comment tweak replacing 'EPT' with 'TDP'.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework tdp_map() and friends to use __virt_pg_map() and drop the custom
EPT code in __tdp_pg_map() and tdp_create_pte(). The EPT code and
__virt_pg_map() are practically identical, the main differences are:
- EPT uses the EPT struct overlay instead of the PTE masks.
- EPT always assumes 4-level EPTs.
To reuse __virt_pg_map(), extend the PTE masks to work with EPT's RWX and
X-only capabilities, and provide a tdp_mmu_init() API so that EPT can pass
in the EPT PTE masks along with the root page level (which is currently
hardcoded to '4').
Don't reuse KVM's insane overloading of the USER bit for EPT_R as there's
no reason to multiplex bits in the selftests, e.g. selftests aren't trying
to shadow guest PTEs and thus don't care about funnelling protections into
a common permissions check.
Another benefit of reusing the code is having separate handling for
upper-level PTEs vs 4K PTEs, which avoids some quirks like setting the
large bit on a 4K PTE in the EPTs.
For all intents and purposes, no functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20251230230150.4150236-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The root GPA is now retrieved from the nested MMU, stop passing VMX
metadata. This is in preparation for making these functions work for
NPTs as well.
Opportunistically drop tdp_pg_map() since it's unused.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
prepare_eptp() currently allocates new EPTs for each vCPU. memstress has
its own hack to share the EPTs between vCPUs. Currently, there is no
reason to have separate EPTs for each vCPU, and the complexity is
significant. The only reason it doesn't matter now is because memstress
is the only user with multiple vCPUs.
Add vm_enable_ept() to allocate EPT page tables for an entire VM, and use
it everywhere to replace prepare_eptp(). Drop 'eptp' and 'eptp_hva' from
'struct vmx_pages' as they serve no purpose (e.g. the EPTP can be built
from the PGD), but keep 'eptp_gpa' so that the MMU structure doesn't need
to be passed in along with vmx_pages. Dynamically allocate the TDP MMU
structure to avoid a cyclical dependency between kvm_util_arch.h and
kvm_util.h.
Remove the workaround in memstress to copy the EPT root between vCPUs
since that's now the default behavior.
Name the MMU tdp_mmu instead of e.g. nested_mmu or nested.mmu to avoid
recreating the same mess that KVM has with respect to "nested" MMUs, e.g.
does nested refer to the stage-2 page tables created by L1, or the stage-1
page tables created by L2?
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20251230230150.4150236-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Stop setting Accessed/Dirty bits when creating EPT entries for L2 so that
the stage-1 and stage-2 (a.k.a. TDP) page table APIs can use common code
without bleeding the EPT hack into the common APIs.
While commit 094444204570 ("selftests: kvm: add test for dirty logging
inside nested guests") is _very_ light on details, the most likely
explanation is that vmx_dirty_log_test was attempting to avoid taking an
EPT Violation on the first _write_ from L2.
static void l2_guest_code(u64 *a, u64 *b)
{
READ_ONCE(*a);
WRITE_ONCE(*a, 1); <===
GUEST_SYNC(true);
...
}
When handling read faults in the shadow MMU, KVM opportunistically creates
a writable SPTE if the mapping can be writable *and* the gPTE is dirty (or
doesn't support the Dirty bit), i.e. if KVM doesn't need to intercept
writes in order to emulate Dirty-bit updates. By setting A/D bits in the
test's EPT entries, the above READ+WRITE will fault only on the read, and
in theory expose the bug fixed by KVM commit 1f4e5fc83a42 ("KVM: x86: fix
nested guest live migration with PML"). If the Dirty bit is NOT set, the
test will get a false pass due; though again, in theory.
However, the test is flawed (and always was, at least in the versions
posted publicly), as KVM (correctly) marks the corresponding L1 GFN as
dirty (in the dirty bitmap) when creating the writable SPTE. I.e. without
a check on the dirty bitmap after the READ_ONCE(), the check after the
first WRITE_ONCE() will get a false pass due to the dirty bitmap/log having
been updated by the read fault, not by PML.
Furthermore, the subsequent behavior in the test's l2_guest_code()
effectively hides the flawed test behavior, as the straight writes to a
new L2 GPA fault also trigger the KVM bug, and so the test will still
detect the failure due to lack of isolation between the two testcases
(Read=>Write vs. Write=>Write).
WRITE_ONCE(*b, 1);
GUEST_SYNC(true);
WRITE_ONCE(*b, 1);
GUEST_SYNC(true);
GUEST_SYNC(false);
Punt on fixing vmx_dirty_log_test for the moment as it will be easier to
properly fix the test once the TDP code uses the common MMU APIs, at which
point it will be trivially easy for the test to retrieve the EPT PTE and
set the Dirty bit as needed.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
[sean: rewrite changelog to explain the situation]
Link: https://patch.msgid.link/20251230230150.4150236-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace the struct overlay with explicit bitmasks, which is clearer and
less error-prone. See commit f18b4aebe107 ("kvm: selftests: do not use
bitfields larger than 32-bits for PTEs") for an example of why bitfields
are not preferable.
Remove the unused PAGE_SHIFT_4K definition while at it.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename the functions from nested_* to tdp_* to make their purpose
clearer.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
On x86, KVM selftests use memslot 0 for all the default regions used by
the test infrastructure. This is an implementation detail.
nested_map_memslot() is currently used to map the default regions by
explicitly passing slot 0, which leaks the library implementation into
the caller.
Rename the function to a very verbose
nested_identity_map_default_memslots() to reflect what it actually does.
Add an assertion that only memslot 0 is being used so that the
implementation does not change from under us.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251230230150.4150236-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use 57-bit addresses with 5-level paging on hardware that supports
LA57. Continue to use 48-bit addresses with 4-level paging on hardware
that doesn't support LA57.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20251028225827.2269128-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
eptp_memslot is unused, remove it. No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-10-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the kernel's canonical $(ARCH) paths instead of the raw target triple
for KVM selftests directories. KVM selftests are quite nearly the only
place in the entire kernel that using the target triple for directories,
tools/testing/selftests/drivers/s390x being the lone holdout.
Using the kernel's preferred nomenclature eliminates the minor, but
annoying, friction of having to translate to KVM's selftests directories,
e.g. for pattern matching, opening files, running selftests, etc.
Opportunsitically delete file comments that reference the full path of the
file, as they are obviously prone to becoming stale, and serve no known
purpose.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
