| Age | Commit message (Collapse) | Author |
|---|
|
commit def036ef87f8641c1c525d5ae17438d7a1006491 upstream.
rcount is intended to be connection-specific: 2 for curr_conn, 1 for
every other connection sharing the same session. However, it is
initialised only once before the hash iteration and is never reset.
After the loop visits curr_conn, later sibling connections are also
checked against rcount == 2, so a sibling with req_running == 1 is
incorrectly treated as idle. This makes the outcome depend on the
hash iteration order: whether a given sibling is checked against the
loose (< 2) or the strict (< 1) threshold is decided by whether it
happens to be visited before or after curr_conn.
The function's contract is "wait until every connection sharing this
session is idle" so that destroy_previous_session() can safely tear
the session down. The latched rcount violates that contract and
reopens the teardown race window the wait logic was meant to close:
destroy_previous_session() may proceed before sibling channels have
actually quiesced, overlapping session teardown with in-flight work
on those connections.
Recompute rcount inside the loop so each connection is compared
against its own threshold regardless of iteration order.
This is a code-inspection fix for an iteration-order-dependent logic
error; a targeted reproducer would require SMB3 multichannel with
in-flight work on a sibling channel landing after curr_conn in hash
order, which is not something that can be triggered reliably.
Fixes: 76e98a158b20 ("ksmbd: fix race condition between destroy_previous_session() and smb2 operations()")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 299f962c0b02d048fb45d248b4da493d03f3175d upstream.
set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes
in u16 variables. When a file has many POSIX ACL entries, the
accumulated size can wrap past 65535, causing the pointer arithmetic
(char *)pndace + *size to land within already-written ACEs. Subsequent
writes then overwrite earlier entries, and pndacl->size gets a
truncated value.
Use check_add_overflow() at each accumulation point to detect the
wrap before it corrupts the buffer, consistent with existing
check_mul_overflow() usage elsewhere in smbacl.c.
Cc: stable@vger.kernel.org
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 30010c952077a1c89ecdd71fc4d574c75a8f5617 upstream.
smb2_get_ea() applies 4-byte alignment padding via memset() after
writing each EA entry. The bounds check on buf_free_len is performed
before the value memcpy, but the alignment memset fires unconditionally
afterward with no check on remaining space.
When the EA value exactly fills the remaining buffer (buf_free_len == 0
after value subtraction), the alignment memset writes 1-3 NUL bytes
past the buf_free_len boundary. In compound requests where the response
buffer is shared across commands, the first command (e.g., READ) can
consume most of the buffer, leaving a tight remainder for the QUERY_INFO
EA response. The alignment memset then overwrites past the physical
kvmalloc allocation into adjacent kernel heap memory.
Add a bounds check before the alignment memset to ensure buf_free_len
can accommodate the padding bytes.
This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix
potencial OOB in get_file_all_info() for compound requests") and
commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound
requests"), both of which added bounds checks before unconditional
writes in QUERY_INFO response handlers.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e4e2ea2a781018ed5d75f969e3e5606beb66e48 upstream.
smb_inherit_dacl() trusts the on-disk num_aces value from the parent
directory's DACL xattr and uses it to size a heap allocation:
aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...);
num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces)
without checking that it is consistent with the declared pdacl_size.
An authenticated client whose parent directory's security.NTACL is
tampered (e.g. via offline xattr corruption or a concurrent path that
bypasses parse_dacl()) can present num_aces = 65535 with minimal
actual ACE data. This causes a ~8 MB allocation (not kzalloc, so
uninitialized) that the subsequent loop only partially populates, and
may also overflow the three-way size_t multiply on 32-bit kernels.
Additionally, the ACE walk loop uses the weaker
offsetof(struct smb_ace, access_req) minimum size check rather than
the minimum valid on-wire ACE size, and does not reject ACEs whose
declared size is below the minimum.
Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path.
A legitimate mount.cifs client creates a parent directory over SMB
(ksmbd writes a valid security.NTACL xattr), then the NTACL blob on
the backing filesystem is rewritten to set num_aces = 0xFFFF while
keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s
hash check still passes. A subsequent SMB2 CREATE of a child under
that parent drives smb2_open() into smb_inherit_dacl() (share has
"vfs objects = acl_xattr" set), which fails the page allocator:
WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0
Workqueue: ksmbd-io handle_ksmbd_work
__alloc_frozen_pages_noprof+0x46c/0x9c0
___kmalloc_large_node+0x68/0x130
__kmalloc_large_node_noprof+0x24/0x70
__kmalloc_noprof+0x4c9/0x690
smb_inherit_dacl+0x394/0x2430
smb2_open+0x595d/0xabe0
handle_ksmbd_work+0x3d3/0x1140
With the patch applied the added guard rejects the tampered value
with -EINVAL before any large allocation runs, smb2_open() falls back
to smb2_create_sd_buffer(), and the child is created with a default
SD. No warning, no splat.
Fix by:
1. Validating num_aces against pdacl_size using the same formula
applied in parse_dacl().
2. Replacing the raw kmalloc(sizeof * num_aces * 2) with
kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe
allocation.
3. Tightening the per-ACE loop guard to require the minimum valid
ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and
rejecting under-sized ACEs, matching the hardening in
smb_check_perm_dacl() and parse_dacl().
v1 -> v2:
- Replace the synthetic test-module splat in the changelog with a
real-path UML + KASAN reproduction driven through mount.cifs and
SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name
in v1 since it does not exist in ksmbd.
- Drop the commit-hash citation from the code comment per Namjae's
review; keep the parse_dacl() pointer.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6a6aa81eac2c9bff66dc6e191179cb69a14426b upstream.
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Fixes: a77e0e02af1c ("ksmbd: add support for supplementary groups")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a58c5af19ff0d6f44f6e9fe31e33a2c92223f77e upstream.
smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL
and the default QUERY_INFO path. The QUERY_INFO branch clamps
qi.input_buffer_length to the server-reported OutputBufferLength and then
copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but
it never verifies that the flexible-array payload actually fits within
rsp_iov[1].iov_len.
A malicious server can return OutputBufferLength larger than the actual
QUERY_INFO response, causing copy_to_user() to walk past the response
buffer and expose adjacent kernel heap to userspace.
Guard the QUERY_INFO copy with a bounds check on the actual Buffer
payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length)
rather than an open-coded addition so the guard cannot overflow on
32-bit builds.
Fixes: f5778c398713 ("SMB3: Allow SMB3 FSCTL queries to be sent to server from tools")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a8cf165566ba55a39fd0f4de172119dd646d39a upstream.
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL.
Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2757ad3e4b6f9e0fed4c7739594e702abc5cab21 upstream.
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl.
Fixes: e2f8fbfb8d09 ("cifs: get mode bits from special sid on stat")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce23158bfe584bd90d1918f279fdf9de57802012 upstream.
The global max_connections check in ksmbd's TCP accept path counts
the newly accepted connection with atomic_inc_return(), but then
rejects the connection when the result is greater than or equal to
server_conf.max_connections.
That makes the effective limit one smaller than configured. For
example:
- max_connections=1 rejects the first connection
- max_connections=2 allows only one connection
The per-IP limit in the same function uses <= correctly because it
counts only pre-existing connections. The global limit instead checks
the post-increment total, so it should reject only when that total
exceeds the configured maximum.
Fix this by changing the comparison from >= to >, so exactly
max_connections simultaneous connections are allowed and the next one
is rejected. This matches the documented meaning of max_connections
in fs/smb/server/ksmbd_netlink.h as the "Number of maximum simultaneous
connections".
Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4d3fc5844d685441befd0caaab648321013cdfd upstream.
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags.
Reported-by: "Kris Karas (Bug Reporting)" <bugs-a21@moonlit-rail.com>
Closes: https://lore.kernel.org/r/f758f4ff-4d54-4244-931d-38f469c3ff14@moonlit-rail.com
Fixes: 4fc3a433c139 ("smb: client: use atomic_t for mnt_cifs_flags")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6551300dc452ac16a855a83dbd1e74899542d3b3 upstream.
Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in
ksmbd_tcp_new_connection()") addressed the kthread_run() failure
path. The earlier alloc_transport() == NULL path in the same
function has the same leak, is reachable pre-authentication via any
TCP connect to port 445, and was empirically reproduced on UML
(ARCH=um, v7.0-rc7): a small number of forced allocation failures
were sufficient to put ksmbd into a state where every subsequent
connection attempt was rejected for the remainder of the boot.
ksmbd_kthread_fn() increments active_num_conn before calling
ksmbd_tcp_new_connection() and discards the return value, so when
alloc_transport() returns NULL the socket is released and -ENOMEM
returned without decrementing the counter. Each such failure
permanently consumes one slot from the max_connections pool; once
cumulative failures reach the cap, atomic_inc_return() hits the
threshold on every subsequent accept and every new connection is
rejected. The counter is only reset by module reload.
An unauthenticated remote attacker can drive the server toward the
memory pressure that makes alloc_transport() fail by holding open
connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN
(0x00FFFFFF); natural transient allocation failures on a loaded
host produce the same drift more slowly.
Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the
alloc_transport() failure path, decrement active_num_conn gated on
server_conf.max_connections.
Repro details: with the patch reverted, forced alloc_transport()
NULL returns leaked counter slots and subsequent connection
attempts -- including legitimate connects issued after the
forced-fail window had closed -- were all rejected with "Limit the
maximum number of connections". With this patch applied, the same
connect sequence produces no rejections and the counter cycles
cleanly between zero and one on every accept.
Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d07b26f39246a82399661936dd0c853983cfade7 upstream.
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 49110a8ce654bbe56bef7c5e44cce31f4b102b8a ]
Currently, ksmbd does not verify if the user attempting to reconnect
to a durable handle is the same user who originally opened the file.
This allows any authenticated user to hijack an orphaned durable handle
by predicting or brute-forcing the persistent ID.
According to MS-SMB2, the server MUST verify that the SecurityContext
of the reconnect request matches the SecurityContext associated with
the existing open.
Add a durable_owner structure to ksmbd_file to store the original opener's
UID, GID, and account name. and catpure the owner information when a file
handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner()
to validate the identity of the requester during SMB2_CREATE (DHnC).
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Reported-by: Navaneeth K <knavaneeth786@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 235e32320a470fcd3998fb3774f2290a0eb302a1 ]
When a durable file handle survives session disconnect (TCP close without
SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the
handle for later reconnection. However, it did not clean up the byte-range
locks on fp->lock_list.
Later, when the durable scavenger thread times out and calls
__ksmbd_close_fd(NULL, fp), the lock cleanup loop did:
spin_lock(&fp->conn->llist_lock);
This caused a slab use-after-free because fp->conn was NULL and the
original connection object had already been freed by
ksmbd_tcp_disconnect().
The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were
left dangling on the freed conn->lock_list while fp->conn was nulled out.
To fix this issue properly, we need to handle the lifetime of
smb_lock->clist across three paths:
- Safely skip clist deletion when list is empty and fp->conn is NULL.
- Remove the lock from the old connection's lock_list in
session_fd_check()
- Re-add the lock to the new connection's lock_list in
ksmbd_reopen_durable_fd().
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Co-developed-by: munan Huang <munanevil@gmail.com>
Signed-off-by: munan Huang <munanevil@gmail.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 49110a8ce654 ("ksmbd: validate owner of durable handle on reconnect")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
smb_direct_flush_send_list()
commit 84ff995ae826aa6bbcc6c7b9ea569ff67c021d72 upstream.
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list.
Reported-by: Ruikai Peng <ruikai@pwno.io>
Closes: https://lore.kernel.org/linux-cifs/CAFD3drNOSJ05y3A+jNXSDxW-2w09KHQ0DivhxQ_pcc7immVVOQ@mail.gmail.com/
Fixes: 34abd408c8ba ("smb: server: make use of smbdirect_socket.send_io.bcredits")
Cc: stable@kernel.org
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Ruikai Peng <ruikai@pwno.io>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: security@kernel.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Tested-by: Ruikai Peng <ruikai@pwno.io>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
smbd_send_batch_flush()
commit 27b7c3e916218b5eb2ee350211140e961bfc49be upstream.
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list.
Reported-by: Ruikai Peng <ruikai@pwno.io>
Closes: https://lore.kernel.org/linux-cifs/CAFD3drNOSJ05y3A+jNXSDxW-2w09KHQ0DivhxQ_pcc7immVVOQ@mail.gmail.com/
Fixes: 21538121efe6 ("smb: client: make use of smbdirect_socket.send_io.bcredits")
Cc: stable@kernel.org
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Ruikai Peng <ruikai@pwno.io>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: security@kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Ruikai Peng <ruikai@pwno.io>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad0057fb91218914d6c98268718ceb9d59b388e1 upstream.
The kernel ASN.1 BER decoder calls action callbacks incrementally as it
walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken
[2] OCTET STRING element, ksmbd_neg_token_alloc() allocates
conn->mechToken immediately via kmemdup_nul(). If a later element in
the same blob is malformed, then the decoder will return nonzero after
the allocation is already live. This could happen if mechListMIC [3]
overrunse the enclosing SEQUENCE.
decode_negotiation_token() then sets conn->use_spnego = false because
both the negTokenInit and negTokenTarg grammars failed. The cleanup at
the bottom of smb2_sess_setup() is gated on use_spnego:
if (conn->use_spnego && conn->mechToken) {
kfree(conn->mechToken);
conn->mechToken = NULL;
}
so the kfree is skipped, causing the mechToken to never be freed.
This codepath is reachable pre-authentication, so untrusted clients can
cause slow memory leaks on a server without even being properly
authenticated.
Fix this up by not checking check for use_spnego, as it's not required,
so the memory will always be properly freed. At the same time, always
free the memory in ksmbd_conn_free() incase some other failure path
forgot to free it.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53370cf9090777774e07fd9a8ebce67c6cc333ab upstream.
parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on
match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is
the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares
only min(num_subauth, 2) sub-authorities so a client SID with
num_subauth = 2 and sub_auth = {88, 3} will match.
If num_subauth = 2 and the ACE is placed at the very end of the security
descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The
out-of-band bytes will then be masked to the low 9 bits and applied as
the file's POSIX mode, probably not something that is good to have
happen.
Fix this up by forcing the SID to actually carry a third sub-authority
before reading it at all.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66751841212c2cc196577453c37f7774ff363f02 upstream.
smb2_get_ea() reads ea_req->EaNameLength from the client request and
passes it directly to strncmp() as the comparison length without
verifying that the length of the name really is the size of the input
buffer received.
Fix this up by properly checking the size of the name based on the value
received and the overall size of the request, to prevent a later
strncmp() call to use the length as a "trusted" size of the buffer.
Without this check, uninitialized heap values might be slowly leaked to
the client.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3df690bba28edec865cf7190be10708ad0ddd67e upstream.
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable <stable@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3d8b9d06bd3ac4c6846f5498800b0f5f8062e53b upstream.
The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA
name and value, but ea_data sits at offset sizeof(struct
smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp()
later reads ea->ea_data[0..nlen-1] and the value bytes follow at
ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1
+ vlen. Isn't pointer math fun?
The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the
8-byte header is in bounds, but since the last EA is placed within 8
bytes of the end of the response, the name and value bytes are read past
the end of iov.
Fix this mess all up by using ea->ea_data as the base for the bounds
check.
An "untrusted" server can use this to leak up to 8 bytes of kernel heap
into the EA name comparison and influence which WSL xattr the data is
interpreted as.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull smb client fix from Steve French:
- Fix potential out of bounds read in mount
* tag 'v7.0-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath
|
|
When cifs_sanitize_prepath is called with an empty string or a string
containing only delimiters (e.g., "/"), the current logic attempts to
check *(cursor2 - 1) before cursor2 has advanced. This results in an
out-of-bounds read.
This patch adds an early exit check after stripping prepended
delimiters. If no path content remains, the function returns NULL.
The bug was identified via manual audit and verified using a
standalone test case compiled with AddressSanitizer, which
triggered a SEGV on affected inputs.
Signed-off-by: Fredric Cover <FredTheDude@proton.me>
Reviewed-by: Henrique Carvalho <[2]henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb server fixes from Steve French:
- Fix out of bounds write
- Fix for better calculating max output buffers
- Fix memory leaks in SMB2/SMB3 lock
- Fix use after free
- Multichannel fix
* tag 'v7.0-rc5-ksmbd-srv-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potencial OOB in get_file_all_info() for compound requests
ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len()
ksmbd: fix memory leaks and NULL deref in smb2_lock()
ksmbd: fix use-after-free and NULL deref in smb_grant_oplock()
ksmbd: do not expire session on binding failure
|
|
When a compound request consists of QUERY_DIRECTORY + QUERY_INFO
(FILE_ALL_INFORMATION) and the first command consumes nearly the entire
max_trans_size, get_file_all_info() would blindly call smbConvertToUTF16()
with PATH_MAX, causing out-of-bounds write beyond the response buffer.
In get_file_all_info(), there was a missing validation check for
the client-provided OutputBufferLength before copying the filename into
FileName field of the smb2_file_all_info structure.
If the filename length exceeds the available buffer space, it could lead to
potential buffer overflows or memory corruption during smbConvertToUTF16
conversion. This calculating the actual free buffer size using
smb2_calc_max_out_buf_len() and returning -EINVAL if the buffer is
insufficient and updating smbConvertToUTF16 to use the actual filename
length (clamped by PATH_MAX) to ensure a safe copy operation.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Reported-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The current rule for smb2_mapping_table.c uses `$(call cmd,...)`, which
fails to track command line modifications in the Makefile (e.g., modifying
the command to `perl -d` or `perl -w` for debug will not trigger a rebuild)
and does not generate the required .cmd file for Kbuild.
Fix this by transitioning to the standard `$(call if_changed,...)` macro.
This includes adding the `FORCE` prerequisite and appending the output
file to the `targets` variable so Kbuild can track it properly.
As a result, Kbuild now automatically handles the cleaning of the
generated file, allowing us to safely drop the redundant `clean-files`
assignment.
Fixes: c527e13a7a66 ("cifs: Autogenerate SMB2 error mapping table")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"),
response buffer management was changed to use dynamic iov array.
In the new design, smb2_calc_max_out_buf_len() expects the second
argument (hdr2_len) to be the offset of ->Buffer field in the
response structure, not a hardcoded magic number.
Fix the remaining call sites to use the correct offsetof() value.
Cc: stable@vger.kernel.org
Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb2_lock() has three error handling issues after list_del() detaches
smb_lock from lock_list at no_check_cl:
1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK
path, goto out leaks smb_lock and its flock because the out:
handler only iterates lock_list and rollback_list, neither of
which contains the detached smb_lock.
2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out
leaks smb_lock and flock for the same reason. The error code
returned to the dispatcher is also stale.
3) In the rollback path, smb_flock_init() can return NULL on
allocation failure. The result is dereferenced unconditionally,
causing a kernel NULL pointer dereference. Add a NULL check to
prevent the crash and clean up the bookkeeping; the VFS lock
itself cannot be rolled back without the allocation and will be
released at file or connection teardown.
Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before
the if(!rc) check in the UNLOCK branch so all exit paths share one
free site, and by freeing smb_lock and flock before goto out in the
non-UNLOCK branch. Propagate the correct error code in both cases.
Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding
a NULL check for locks_free_lock(rlock) in the shared cleanup.
Found via call-graph analysis using sqry.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Suggested-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Werner Kasselman <werner@verivus.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb_grant_oplock() has two issues in the oplock publication sequence:
1) opinfo is linked into ci->m_op_list (via opinfo_add) before
add_lease_global_list() is called. If add_lease_global_list()
fails (kmalloc returns NULL), the error path frees the opinfo
via __free_opinfo() while it is still linked in ci->m_op_list.
Concurrent m_op_list readers (opinfo_get_list, or direct iteration
in smb_break_all_levII_oplock) dereference the freed node.
2) opinfo->o_fp is assigned after add_lease_global_list() publishes
the opinfo on the global lease list. A concurrent
find_same_lease_key() can walk the lease list and dereference
opinfo->o_fp->f_ci while o_fp is still NULL.
Fix by restructuring the publication sequence to eliminate post-publish
failure:
- Set opinfo->o_fp before any list publication (fixes NULL deref).
- Preallocate lease_table via alloc_lease_table() before opinfo_add()
so add_lease_global_list() becomes infallible after publication.
- Keep the original m_op_list publication order (opinfo_add before
lease list) so concurrent opens via same_client_has_lease() and
opinfo_get_list() still see the in-flight grant.
- Use opinfo_put() instead of __free_opinfo() on err_out so that
the RCU-deferred free path is used.
This also requires splitting add_lease_global_list() to take a
preallocated lease_table and changing its return type from int to void,
since it can no longer fail.
Fixes: 1dfd062caa16 ("ksmbd: fix use-after-free by using call_rcu() for oplock_info")
Cc: stable@vger.kernel.org
Signed-off-by: Werner Kasselman <werner@verivus.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a multichannel session binding request fails (e.g. wrong password),
the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED.
However, during binding, sess points to the target session looked up via
ksmbd_session_lookup_slowpath() -- which belongs to another connection's
user. This allows a remote attacker to invalidate any active session by
simply sending a binding request with a wrong password (DoS).
Fix this by skipping session expiration when the failed request was
a binding attempt, since the session does not belong to the current
connection. The reference taken by ksmbd_session_lookup_slowpath() is
still correctly released via ksmbd_user_session_put().
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fixes from Steve French:
- Fix reporting of i_blocks
- Fix Kerberos mounts with different usernames to same server
- Trivial comment cleanup
* tag 'v7.0-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix generic/694 due to wrong ->i_blocks
cifs: smb1: fix comment typo
smb: client: fix krb5 mount with username option
|
|
When updating ->i_size, make sure to always update ->i_blocks as well
until we query new allocation size from the server.
generic/694 was failing because smb3_simple_falloc() was missing the
update of ->i_blocks after calling cifs_setsize(). So, fix this by
updating ->i_blocks directly in cifs_setsize(), so all places that
call it doesn't need to worry about updating ->i_blocks later.
Reported-by: Shyam Prasad N <sprasad@microsoft.com>
Closes: https://lore.kernel.org/r/CANT5p=rqgRwaADB=b_PhJkqXjtfq3SFv41SSTXSVEHnuh871pA@mail.gmail.com
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_durable_handle_context() unconditionally assigns dh_info->fp->conn
to the current connection when handling a DURABLE_REQ_V2 context with
SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by
fp->conn, so it returns file handles that are already actively connected.
The unconditional overwrite replaces fp->conn, and when the overwriting
connection is subsequently freed, __ksmbd_close_fd() dereferences the
stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a
use-after-free.
KASAN report:
[ 7.349357] ==================================================================
[ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0
[ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108
[ 7.350010]
[ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY
[ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work
[ 7.350083] Call Trace:
[ 7.350087] <TASK>
[ 7.350087] dump_stack_lvl+0x64/0x80
[ 7.350094] print_report+0xce/0x660
[ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 7.350101] ? __pfx___mod_timer+0x10/0x10
[ 7.350106] ? _raw_spin_lock+0x75/0xe0
[ 7.350108] kasan_report+0xce/0x100
[ 7.350109] ? _raw_spin_lock+0x75/0xe0
[ 7.350114] kasan_check_range+0x105/0x1b0
[ 7.350116] _raw_spin_lock+0x75/0xe0
[ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780
[ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0
[ 7.350128] __ksmbd_close_fd+0x27f/0xaf0
[ 7.350131] ksmbd_close_fd+0x135/0x1b0
[ 7.350133] smb2_close+0xb19/0x15b0
[ 7.350142] ? __pfx_smb2_close+0x10/0x10
[ 7.350143] ? xas_load+0x18/0x270
[ 7.350146] ? _raw_spin_lock+0x84/0xe0
[ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350150] ? _raw_spin_unlock+0xe/0x30
[ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0
[ 7.350154] handle_ksmbd_work+0x40f/0x1080
[ 7.350156] process_one_work+0x5fa/0xef0
[ 7.350162] ? assign_work+0x122/0x3e0
[ 7.350163] worker_thread+0x54b/0xf70
[ 7.350165] ? __pfx_worker_thread+0x10/0x10
[ 7.350166] kthread+0x346/0x470
[ 7.350170] ? recalc_sigpending+0x19b/0x230
[ 7.350176] ? __pfx_kthread+0x10/0x10
[ 7.350178] ret_from_fork+0x4fb/0x6c0
[ 7.350183] ? __pfx_ret_from_fork+0x10/0x10
[ 7.350185] ? __switch_to+0x36c/0xbe0
[ 7.350188] ? __pfx_kthread+0x10/0x10
[ 7.350190] ret_from_fork_asm+0x1a/0x30
[ 7.350197] </TASK>
[ 7.350197]
[ 7.355160] Allocated by task 123:
[ 7.355261] kasan_save_stack+0x33/0x60
[ 7.355373] kasan_save_track+0x14/0x30
[ 7.355484] __kasan_kmalloc+0x8f/0xa0
[ 7.355593] ksmbd_conn_alloc+0x44/0x6d0
[ 7.355711] ksmbd_kthread_fn+0x243/0xd70
[ 7.355839] kthread+0x346/0x470
[ 7.355942] ret_from_fork+0x4fb/0x6c0
[ 7.356051] ret_from_fork_asm+0x1a/0x30
[ 7.356164]
[ 7.356214] Freed by task 134:
[ 7.356305] kasan_save_stack+0x33/0x60
[ 7.356416] kasan_save_track+0x14/0x30
[ 7.356527] kasan_save_free_info+0x3b/0x60
[ 7.356646] __kasan_slab_free+0x43/0x70
[ 7.356761] kfree+0x1ca/0x430
[ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0
[ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40
[ 7.357138] kthread+0x346/0x470
[ 7.357240] ret_from_fork+0x4fb/0x6c0
[ 7.357350] ret_from_fork_asm+0x1a/0x30
[ 7.357463]
[ 7.357513] The buggy address belongs to the object at ffff8881056ac000
[ 7.357513] which belongs to the cache kmalloc-1k of size 1024
[ 7.357857] The buggy address is located 396 bytes inside of
[ 7.357857] freed 1024-byte region [ffff8881056ac000, ffff8881056ac400)
Fix by removing the unconditional fp->conn assignment and rejecting the
replay when fp->conn is non-NULL. This is consistent with
ksmbd_lookup_durable_fd(), which also rejects file handles with a
non-NULL fp->conn. For disconnected file handles (fp->conn == NULL),
ksmbd_reopen_durable_fd() handles setting fp->conn.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x100000000000200(workingset|node=0|zone=2)
[ 4.154160] page_type: f5(slab)
[ 4.154251] raw: 0100000000000200 ffff888100041280 ffff888100040110 ffff888100040110
[ 4.154461] raw: ffff88810430ce80 0000000800200009 00000000f5000000 0000000000000000
[ 4.154668] page dumped because: kasan: bad access detected
[ 4.154820]
[ 4.154866] Memory state around the buggy address:
[ 4.155002] ffff88810430c080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155196] ffff88810430c100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155391] >ffff88810430c180: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 4.155587] ^
[ 4.155693] ffff88810430c200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155891] ffff88810430c280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.156087] ==================================================================
Add the same t_state validation to the compound reuse path, consistent
with ksmbd_tree_conn_lookup().
Fixes: 5005bcb42191 ("ksmbd: validate session id and tree id in the compound request")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs().
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path.
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
__ksmbd_tree_conn_disconnect() drops the share_conf reference before
checking tree_conn->refcount. When someone uses SMB3 multichannel and
binds two connections to one session, a SESSION_LOGOFF on connection A
calls ksmbd_conn_wait_idle(conn) which only drains connection A's
request counter, not connection B's. This means there's a race condition:
requests already dispatched on connection B hold tree_conn references via
work->tcon. The disconnect path frees share_conf while those requests
are still walking work->tcon->share_conf, causing a use-after-free.
This fix combines the share_conf put with the tree_conn free so it
only happens when the last reference is dropped.
Fixes: b39a1833cc4a ("ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency")
Signed-off-by: Nicholas Carlini <nicholas@carlini.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The file contains a spelling error in a source comment (resposne).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'resposne' with 'response' in the affected comment. This is a
comment-only cleanup and does not change behavior.
[v2: Removed Fixes: and Cc: to stable tags.]
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
```
Reported-by: Oscar Santos <ossantos@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb client fixes from Steve French:
- Fix reconnect when using non-default port
- Fix default retransmission behavior
- Fix open handle reuse in cifs_open
- Fix export for smb2-mapperror-test
- Fix potential corruption on write retry
- Fix potentially uninitialized superblock flags
- Fix missing O_DIRECT and O_SYNC flags on create
* tag 'v7.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make default value of retrans as zero
smb: client: fix open handle lookup in cifs_open()
smb: client: fix iface port assignment in parse_server_interfaces
smb/client: only export symbol for 'smb2maperror-test' module
smb: client: fix in-place encryption corruption in SMB2_write()
smb: client: fix sbflags initialization
smb: client: fix atomic open with O_DIRECT & O_SYNC
|
|
When retrans mount option was introduced, the default value was set
as 1. However, in the light of some bugs that this has exposed recently
we should change it to 0 and retain the old behaviour before this option
was introduced.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When looking up open handles to be re-used in cifs_open(), calling
cifs_get_{writable,readable}_path() is wrong as it will look up for
the first matching open handle, and if @file->f_flags doesn't match,
it will ignore the remaining open handles in
cifsInodeInfo::openFileList that might potentially match
@file->f_flags.
For writable and readable handles, fix this by calling
__cifs_get_writable_file() and __find_readable_file(), respectively,
with FIND_OPEN_FLAGS set.
With the patch, the following program ends up with two opens instead
of three sent over the wire.
```
#define _GNU_SOURCE
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
int main(int argc, char *argv[])
{
int fd;
fd = open("/mnt/1/foo", O_CREAT | O_WRONLY | O_TRUNC, 0664);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
return 0;
}
```
```
$ mount.cifs //srv/share /mnt/1 -o ...
$ gcc test.c && ./a.out
```
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_server_interfaces() initializes interface socket addresses with
CIFS_PORT. When the mount uses a non-default port this overwrites the
configured destination port.
Later, cifs_chan_update_iface() copies this sockaddr into server->dstaddr,
causing reconnect attempts to use the wrong port after server interface
updates.
Use the existing port from server->dstaddr instead.
Cc: stable@vger.kernel.org
Fixes: fe856be475f7 ("CIFS: parse and store info on iface queries")
Tested-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Only export smb2_get_err_map_test smb2_error_map_table_test and
smb2_error_map_num symbol for 'smb2maperror-test' module.
Fixes: 7d0bf050a587 ("smb/client: make SMB2 maperror KUnit tests a separate module")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption.
Cc: stable@vger.kernel.org #6.3+
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The newly introduced variable is initialized in an #ifdef block
but used outside of it, leading to undefined behavior when
CONFIG_CIFS_ALLOW_INSECURE_LEGACY is disabled:
fs/smb/client/dir.c:417:9: error: variable 'sbflags' is uninitialized when used here [-Werror,-Wuninitialized]
417 | if (sbflags & CIFS_MOUNT_DYNPERM)
| ^~~~~~~
Move the initialization into the declaration, the same way as the
other similar function do it.
Fixes: 4fc3a433c139 ("smb: client: use atomic_t for mnt_cifs_flags")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When user application requests O_DIRECT|O_SYNC along with O_CREAT on
open(2), CREATE_NO_BUFFER and CREATE_WRITE_THROUGH bits were missed in
CREATE request when performing an atomic open, thus leading to
potentially data integrity issues.
Fix this by setting those missing bits in CREATE request when
O_DIRECT|O_SYNC has been specified in cifs_do_create().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and
generate_smb3encryptionkey() log the session, signing, encryption, and
decryption key bytes. Remove the logs to avoid exposing credentials.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is
dereferenced after rcu_read_unlock(), creating a use-after-free
window.
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
