| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
|
|
Simplify the TEE implementor ID match by returning the boolean
expression directly instead of going through an if/else.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Link: https://patch.msgid.link/20260126-optee-simplify-context-match-v1-3-d4104e526cb6@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The tee bus got dedicated callbacks for probe and remove. Make use of
these. This fixes a runtime warning about the driver needing to be
converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The tee subsystem recently got a set of dedicated functions to register
(and unregister) a tee driver. Make use of them. These care for setting the
driver's bus (so the explicit assignment can be dropped) and the driver
owner (which is an improvement this driver benefits from).
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fix sparse warningg:
drivers/rtc/rtc-optee.c:714:1: sparse: sparse: symbol 'optee_rtc_pm_ops' was not
declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509230549.L26lw7UZ-lkp@intel.com/
Link: https://lore.kernel.org/r/20251005201925.3757345-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Return "optee_alarm" instead of "alarm". The "alarm" pointer is a valid
pointer and not an error pointer.
Fixes: 6266aea864fa ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9e3718fe1128964907619ad325c0c5f5c1354ace.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Return an error code if kthread_create() fails. Currently the code
returns success.
Fixes: 6266aea864fa ("rtc: optee: add alarm related rtc ops to optee rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/21f1a18008f1bbc8f70d0bd5c05b72fbf5fc9c7d.1758182509.git.dan.carpenter@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add read_alarm and set_alarm ops from the rtc framework.
The support of an alarm is handled by a kernel thread waiting in OP-TEE
for an asynchronous notification that comes in the interrupt
handler of the alarm interruption on OP-TEE secure world.
Once the notification arrives, the kernel thread previously suspended
is rescheduled (this is handled by the OP-TEE kernel driver) and comes
back with the alarm information to the kernel.
A second session is therefore needed to enable/disable/cancel a waiting
alarm event as the kernel thread stopped in OP-TEE takes a form of mutex
on the session and so no one can use this session in parallel.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-3-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Remove memcpy by using directly the shared memory.
Remove memset be initialize variable to 0 on stack.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-2-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fix a memory leak in case of driver removal.
Free the shared memory used for arguments exchanges between kernel and
OP-TEE RTC PTA.
Fixes: 81c2f059ab90 ("rtc: optee: add RTC driver for OP-TEE RTC PTA")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250715-upstream-optee-rtc-v1-1-e0fdf8aae545@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This drivers allows to communicate with a RTC PTA handled by OP-TEE [1].
This PTA allows to query RTC information, set/get time and set/get
offset depending on the supported features.
[1] https://github.com/OP-TEE/optee_os/pull/5179
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220308133505.471601-1-clement.leger@bootlin.com
|
