| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
On creation and clearing of a page table mapping, instrument such calls by
invoking page_table_check_pte_set and page_table_check_pte_clear
respectively. These calls serve as a sanity check against illegal
mappings.
Enable ARCH_SUPPORTS_PAGE_TABLE_CHECK on powerpc, except when HUGETLB_PAGE
is enabled (powerpc has some weirdness in how it implements
set_huge_pte_at(), which may require some further work).
See also:
riscv support in commit 3fee229a8eb9 ("riscv/mm: enable
ARCH_SUPPORTS_PAGE_TABLE_CHECK")
arm64 in commit 42b2547137f5 ("arm64/mm: enable
ARCH_SUPPORTS_PAGE_TABLE_CHECK")
x86_64 in commit d283d422c6c4 ("x86: mm: add x86_64 support for page table
check")
[ajd@linux.ibm.com: rebase, add additional instrumentation, misc fixes]
Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-12-755bc151a50b@linux.ibm.com
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page table checking depends on architectures providing an implementation
of p{te,md,ud}_user_accessible_page. With refactorisations made on
powerpc/mm, the pte_access_permitted() and similar methods verify whether
a userland page is accessible with the required permissions.
Since page table checking is the only user of
p{te,md,ud}_user_accessible_page(), implement these for all platforms,
using some of the same preliminary checks taken by pte_access_permitted()
on that platform.
Since commit 8e9bd41e4ce1 ("powerpc/nohash: Replace pte_user() by
pte_read()") pte_user() is no longer required to be present on all
platforms as it may be equivalent to or implied by pte_read(). Hence
implementations of pte_user_accessible_page() are specialised.
[ajd@linux.ibm.com: rebase and clean up]
Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-10-755bc151a50b@linux.ibm.com
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Guo Weikang <guoweikang.kernel@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At the time being, TASK_SIZE can be customized by the user via Kconfig
but it is not possible to check all constraints in Kconfig. Impossible
setups are detected at compile time with BUILD_BUG() but that leads
to build failure when setting crazy values. It is not a problem on its
own because the user will usually either use the default value or set
a well thought value. However build robots generate crazy random
configs that lead to build failures, and build robots see it as a
regression every time a patch adds such a constraint.
So instead of failing the build when the custom TASK_SIZE is too
big, just adjust it to the maximum possible value matching the setup.
Several architectures already calculate TASK_SIZE based on other
parameters and options.
In order to do so, move MODULES_VADDR calculation into task_size_32.h
and ensure that:
- On book3s/32, userspace and module area have their own segments (256M)
- On 8xx, userspace has its own full PGDIR entries (4M)
Then TASK_SIZE is guaranteed to be correct so remove related
BUILD_BUG()s.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6a2575420770d075cd090b5a316730a2ffafdee4.1766574657.git.chleroy@kernel.org
|
|
For book3s/32 it is assumed that TASK_SIZE is a multiple of 256 Mbytes,
but Kconfig allows any value for TASK_SIZE.
In all relevant calculations, align TASK_SIZE to the upper 256 Mbytes
boundary.
Also use ASM_CONST() in the definition of TASK_SIZE to ensure it is
seen as an unsigned constant.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8928d906079e156c59794c41e826a684eaaaebb4.1766574657.git.chleroy@kernel.org
|
|
Since commit 16132529cee5 ("powerpc/32s: Rework Kernel Userspace
Access Protection") the size parameter is unused on all platforms.
And the 'from' parameter has never been used.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4552b00707923b71150ee47b925d6eaae1b03261.1766574657.git.chleroy@kernel.org
|
|
On 32-bit book3s with hash-MMUs, tlb_flush() was a no-op. This was
unnoticed because all uses until recently were for unmaps, and thus
handled by __tlb_remove_tlb_entry().
After commit 4a18419f71cd ("mm/mprotect: use mmu_gather") in kernel 5.19,
tlb_gather_mmu() started being used for mprotect as well. This caused
mprotect to simply not work on these machines:
int *ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
*ptr = 1; // force HPTE to be created
mprotect(ptr, 4096, PROT_READ);
*ptr = 2; // should segfault, but succeeds
Fixed by making tlb_flush() actually flush TLB pages. This finally
agrees with the behaviour of boot3s64's tlb_flush().
Fixes: 4a18419f71cd ("mm/mprotect: use mmu_gather")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251116-vasi-mprotect-g3-v3-1-59a9bd33ba00@vasilevsky.ca
|
|
Commit 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all
PGDIRs and preallocate execmem page tables") was supposed to extend
to powerpc 603 the copy of kernel PGD entries into all PGDIRs
implemented in a previous patch on the 8xx. But 603 is book3s/32 and
uses a duplicate of pgd_alloc() defined in another header.
So really do the copy at the correct place for the 603.
Fixes: 82ef440f9a38 ("powerpc/603: Copy kernel PGD entries into all PGDIRs and preallocate execmem page tables")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/752ab7514cae089a2dd7cc0f3d5e35849f76adb9.1755757797.git.christophe.leroy@csgroup.eu
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembler code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This is bad since macros starting with two underscores are names
that are reserved by the C language. It can also be very confusing
for the developers when switching between userspace and kernelspace
coding, or when dealing with uapi headers that rather should use
__ASSEMBLER__ instead. So let's standardize now on the __ASSEMBLER__
macro that is provided by the compilers.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), apart from tweaking two comments manually in
arch/powerpc/include/asm/bug.h and arch/powerpc/include/asm/kasan.h
(which did not have proper underscores at the end) and fixing a
checkpatch error about spaces in arch/powerpc/include/asm/spu_csa.h.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250801082007.32904-3-thuth@redhat.com
|
|
Make pte_swp_exclusive return bool instead of int. This will better
reflect how pte_swp_exclusive is actually used in the code.
This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not
returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper
32-bits of PTE (like on alpha).
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/
Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/
[ Applied as the 'sed' script Al suggested - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
book3s/32 platforms have usually more memory than 8xx, but it is still
not worth reserving a full segment (256 Mbytes) for module text.
64Mbytes should be far enough.
Also fix TASK_SIZE when EXECMEM is not selected, and add a build
verification for overlap of module execmem space with user segments.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c1f6a4e47f177d919561c6e97d31af5564923cf6.1724173828.git.christophe.leroy@csgroup.eu
|
|
In preparation of implementing huge pages on powerpc 8xx without hugepd,
enclose hugepd related code inside an ifdef CONFIG_ARCH_HAS_HUGEPD
This also allows removing some stubs.
Link: https://lkml.kernel.org/r/ada097ca8a4fa85a77f51719516ef2478800d77a.1719928057.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There's a single call to local_flush_tlb_page_psize() in the code
patching code. That call is never executed on 32-bit Book3S,
because it's guarded by mm_patch_enabled() which is essentially a
radix_enabled() check, which is always false on 32s.
However depending on how the optimiser sees things it may still trip
over the BUILD_BUG() in the 32s stub of local_flush_tlb_page_psize().
To avoid that, implement it in terms of flush_range() so that if it ever
becomes called it should function, even if not optimally.
Note that flush_range() deals with page aligning the address and so on,
and that 32s doesn't support huge pages so there should be no issue with
non-standard page sizes needing to be flushed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023092319.1507325-1-mpe@ellerman.id.au
|
|
Introduce PAGE_EXECONLY_X macro which provides exec-only rights.
The _X may be seen as redundant with the EXECONLY but it helps
keep consistency, all macros having the EXEC right have _X.
And put it next to PAGE_NONE as PAGE_EXECONLY_X is
somehow PAGE_NONE + EXEC just like all other SOMETHING_X are
just SOMETHING + EXEC.
On book3s/64 PAGE_EXECONLY becomes PAGE_READONLY_X.
On book3s/64, as PAGE_EXECONLY is only valid for Radix add
VM_READ flag in vm_get_page_prot() for non-Radix.
And update access_error() so that a non exec fault on a VM_EXEC only
mapping is always invalid, even when the underlying layer don't
always generate a fault for that.
For 8xx, set PAGE_EXECONLY_X as _PAGE_NA | _PAGE_EXEC.
For others, only set it as just _PAGE_EXEC
With that change, 8xx, e500 and 44x fully honor execute-only
protection.
On 40x that is a partial implementation of execute-only. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.
On 603 MMU, TLB missed are handled by SW and there are separate
DTLB and ITLB. Execute-only is therefore now supported by not loading
DTLB when read access is not permitted.
On hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4283ea9cbef9ff2fbee468904800e1962bc8fc18.1695659959.git.christophe.leroy@csgroup.eu
|
|
On 603 MMU, TLB missed are handled by SW and there are separated
DTLB and ITLB. It is therefore possible to implement execute-only
protection by not loading DTLB when read access is not permitted.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ, remove
_PAGE_USER and add _PAGE_READ. Then use the virtual address to know
whether user rights or kernel rights are to be used.
With that change, 603 MMU now honors execute-only protection.
For hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b7702dd5a041ec59055ed2880f4952e94c087a2e.1695659959.git.christophe.leroy@csgroup.eu
|
|
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842deb1 ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5798782869fe4d2698f104948dabd17657b89395.1695659959.git.christophe.leroy@csgroup.eu
|
|
pte_mkuser() is never used. Remove it.
pte_mkpriviledged() is not used anymore. Remove it too.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1a1dc18816456c637dc8a9c38d532f7598b60ac4.1695659959.git.christophe.leroy@csgroup.eu
|
|
fixmap.h need pgtable.h for [un]map_kernel_page()
pgtable.h need fixmap.h for FIXADDR_TOP.
Untangle the two files by moving FIXADDR_TOP into pgtable.h
Also move VIRT_IMMR_BASE to fixmap.h to avoid fixmap.h in mmu.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5eba12392a018be28ad0a02ed844767b132589e7.1695659959.git.christophe.leroy@csgroup.eu
|
|
pte_ERROR() is used neither in powerpc code nor in common mm code.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bec9eb973ecc1cba091e5c9201d877a7797f3242.1695659959.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
|
|
Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio(). Change
the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page to per-folio.
[willy@infradead.org: re-export flush_dcache_icache_folio()]
Link: https://lkml.kernel.org/r/ZMx1daYwvD9EM7Cv@casper.infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-22-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__set_pte_at() handles 3 main cases with #ifdefs plus the 'percpu'
subcase which leads to code duplication.
Rewrite the function using IS_ENABLED() to minimise the total number
of cases and remove duplicated code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2322dd08217bccab25456fe8b189edf0e6a8b6dd.1692121353.git.christophe.leroy@csgroup.eu
|
|
To avoid a useless nop on top of every uaccess enable/disable and
make life easier for objtool, replace static branches by ASM feature
fixups that will nop KUAP enabling instructions out in the unlikely
case KUAP is disabled at boottime.
Leave it as is on book3s/64 for now, it will be handled later when
objtool is activated on PPC64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/671948788024fd890ec4ed175bc332dab8664ea5.1689091022.git.christophe.leroy@csgroup.eu
|
|
Objtool reports following warnings:
arch/powerpc/kernel/signal_32.o: warning: objtool:
__prevent_user_access.constprop.0+0x4 (.text+0x4):
redundant UACCESS disable
arch/powerpc/kernel/signal_32.o: warning: objtool: user_access_begin+0x2c
(.text+0x4c): return with UACCESS enabled
arch/powerpc/kernel/signal_32.o: warning: objtool: handle_rt_signal32+0x188
(.text+0x360): call to __prevent_user_access.constprop.0() with UACCESS enabled
arch/powerpc/kernel/signal_32.o: warning: objtool: handle_signal32+0x150
(.text+0x4d4): call to __prevent_user_access.constprop.0() with UACCESS enabled
This is due to some KUAP enabling/disabling functions being outline
allthough they are marked inline. Use __always_inline instead.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ca5e50ddbec3867db5146ebddbc9a1dc0e443bc8.1689091022.git.christophe.leroy@csgroup.eu
|
|
On book3s/32 KUAP is performed at segment level. At the moment,
when enabling userspace access, only current segment is modified.
Then if a write is performed on another user segment, a fault is
taken and all other user segments get enabled for userspace
access. This then require special attention when disabling
userspace access.
Having a userspace write access crossing a segment boundary is
unlikely. Having a userspace write access crossing a segment boundary
back and forth is even more unlikely. So, instead of enabling
userspace access on all segments when a write fault occurs, just
change which segment has userspace access enabled in order to
eliminate the case when more than one segment has userspace access
enabled. That simplifies userspace access deactivation.
There is however a corner case which is even more unlikely but has
to be handled anyway: an unaligned access which is crossing a
segment boundary. That would definitely require at least having
userspace access enabled on the two segments. To avoid complicating
the likely case for a so unlikely happening, handle such situation
like an alignment exception and emulate the store.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8de8580513c1a6e880bad1ba9a69d3efad3d4fa5.1689091022.git.christophe.leroy@csgroup.eu
|
|
All but book3s/64 use a static branch key for disabling kuap.
book3s/64 uses an mmu feature.
Refactor all targets to use MMU_FTR_KUAP like book3s/64.
For PPC32 that implies updating mmu features fixups once KUAP
has been initialised.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6b3d7c977bad73378ea368bc6818e9c94ea95ab0.1689091022.git.christophe.leroy@csgroup.eu
|
|
kuep_is_disabled() was introduced by commit 91bb30822a2e ("powerpc/32s:
Refactor update of user segment registers") but then all users but one
were removed by commit 526d4a4c77ae ("powerpc/32s: Do kuep_lock() and
kuep_unlock() in assembly").
Fold kuep_is_disabled() into init_new_context() which is its only user.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b2247147c0a8c830ac82966451647850df4a64da.1689091022.git.christophe.leroy@csgroup.eu
|
|
Disassembly of interrupt_enter_prepare() shows a pointless nop
before the mftb
c000abf0 <interrupt_enter_prepare>:
c000abf0: 81 23 00 84 lwz r9,132(r3)
c000abf4: 71 29 40 00 andi. r9,r9,16384
c000abf8: 41 82 00 28 beq- c000ac20 <interrupt_enter_prepare+0x30>
c000abfc: ===> 60 00 00 00 nop <====
c000ac00: 7d 0c 42 e6 mftb r8
c000ac04: 80 e2 00 08 lwz r7,8(r2)
c000ac08: 81 22 00 28 lwz r9,40(r2)
c000ac0c: 91 02 00 24 stw r8,36(r2)
c000ac10: 7d 29 38 50 subf r9,r9,r7
c000ac14: 7d 29 42 14 add r9,r9,r8
c000ac18: 91 22 00 08 stw r9,8(r2)
c000ac1c: 4e 80 00 20 blr
c000ac20: 60 00 00 00 nop
c000ac24: 7d 5a c2 a6 mfmd_ap r10
c000ac28: 3d 20 de 00 lis r9,-8704
c000ac2c: 91 43 00 b0 stw r10,176(r3)
c000ac30: 7d 3a c3 a6 mtspr 794,r9
c000ac34: 4e 80 00 20 blr
That comes from the call to kuap_loc(), allthough __kuap_lock() is an
empty function on the 8xx.
To avoid that, only perform kuap_is_disabled() check when there is
something to do with __kuap_lock().
Do the same with __kuap_save_and_lock() and
__kuap_get_and_assert_locked().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a854d25bea375d4ba6ca9c2617f9edbba397100a.1689091022.git.christophe.leroy@csgroup.eu
|
|
The x86 Shadow stack feature includes a new type of memory called shadow
stack. This shadow stack memory has some unusual properties, which requires
some core mm changes to function properly.
One of these unusual properties is that shadow stack memory is writable,
but only in limited ways. These limits are applied via a specific PTE
bit combination. Nevertheless, the memory is writable, and core mm code
will need to apply the writable permissions in the typical paths that
call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so
that the x86 implementation of it can know whether to create regular
writable or shadow stack mappings.
But there are a couple of challenges to this. Modifying the signatures of
each arch pte_mkwrite() implementation would be error prone because some
are generated with macros and would need to be re-implemented. Also, some
pte_mkwrite() callers operate on kernel memory without a VMA.
So this can be done in a three step process. First pte_mkwrite() can be
renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite()
added that just calls pte_mkwrite_novma(). Next callers without a VMA can
be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers
can be changed to take/pass a VMA.
Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and
adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same
pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(),
create a new arch config HAS_HUGE_PAGE that can be used to tell if
pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the
compiler would not be able to find pmd_mkwrite_novma().
No functional change.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/
Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
|
|
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.
Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We already implemented support for 64bit book3s in commit bff9beaa2e80
("powerpc/pgtable: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE for book3s")
Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE also in 32bit by reusing yet
unused LSB 2 / MSB 29. There seems to be no real reason why that bit
cannot be used, and reusing it avoids having to steal one bit from the
swap offset.
While at it, mask the type in __swp_entry().
Link: https://lkml.kernel.org/r/20230113171026.582290-18-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Adds a local TLB flush operation that works given an mm_struct, VA to
flush, and page size representation. Most implementations mirror the
surrounding code. The book3s/32/tlbflush.h implementation is left as
a BUILD_BUG because it is more complicated and not required for
anything as yet.
This removes the need to create a vm_area_struct, which the temporary
patching mm work does not need.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221109045112.187069-8-bgray@linux.ibm.com
|
|
Avoid multi-lines to help getting a complete view when using
grep. They still remain under the 100 chars limit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bc3f5a51949ee7f52dba36677db23d4337c7995.1662544980.git.christophe.leroy@csgroup.eu
|
|
PAGE_KERNEL_TEXT, PAGE_KERNEL_EXEC and PAGE_AGP are the same
for all powerpcs.
Remove duplicated definitions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/92254499430d13d99e4a4d7e9ad8e8284cb35380.1662544974.git.christophe.leroy@csgroup.eu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
|
|
This is straightforward for everything except nohash64 where we
indirect through pmd_page(). There must be a better way to do this.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
On 603 core, TLB miss handler don't do any change to the
page tables so pte_update() doesn't need to be atomic.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cc89d3c11fc9c742d0df3454a657a3a00be24046.1643538554.git.christophe.leroy@csgroup.eu
|
|
Unmapping a fixmap entry is done by calling __set_fixmap()
with FIXMAP_PAGE_CLEAR as flags.
Today, powerpc __set_fixmap() calls map_kernel_page().
map_kernel_page() is not happy when called a second time
for the same page.
WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8
CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682
NIP: c0017cd4 LR: c00187f0 CTR: 00000010
REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000
GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c
GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000
NIP [c0017cd4] set_pte_at+0xc/0x1e8
LR [c00187f0] map_kernel_page+0x9c/0x100
Call Trace:
[e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable)
[e1011e30] [c0165fec] __set_fixmap+0x30/0x44
[e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170
[e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0
[e1011e90] [c0c03634] do_one_initcall+0x80/0x178
[e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250
[e1011f20] [c0007e34] kernel_init+0x24/0x140
[e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010
4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030
Implement unmap_kernel_page() which clears an existing pte.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
|
|
It has been reported some configuration where the kernel doesn't
boot with KASAN enabled.
This is due to wrong BAT allocation for the KASAN area:
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw m
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw m
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw m
3: 0xf8000000-0xf9ffffff 0x2a000000 32M Kernel rw m
4: 0xfa000000-0xfdffffff 0x2c000000 64M Kernel rw m
A BAT must have both virtual and physical addresses alignment matching
the size of the BAT. This is not the case for BAT 4 above.
Fix kasan_init_region() by using block_size() function that is in
book3s32/mmu.c. To be able to reuse it here, make it non static and
change its name to bat_block_size() in order to avoid name conflict
with block_size() defined in <linux/blkdev.h>
Also reuse find_free_bat() to avoid an error message from setbat()
when no BAT is available.
And allocate memory outside of linear memory mapping to avoid
wasting that precious space.
With this change we get correct alignment for BATs and KASAN shadow
memory is allocated outside the linear memory space.
---[ Data Block Address Translation ]---
0: 0xc0000000-0xcfffffff 0x00000000 256M Kernel rw
1: 0xd0000000-0xdfffffff 0x10000000 256M Kernel rw
2: 0xe0000000-0xefffffff 0x20000000 256M Kernel rw
3: 0xf8000000-0xfbffffff 0x7c000000 64M Kernel rw
4: 0xfc000000-0xfdffffff 0x7a000000 32M Kernel rw
Fixes: 7974c4732642 ("powerpc/32s: Implement dedicated kasan_init_region()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7a50ef902494d1325227d47d33dada01e52e5518.1641818726.git.christophe.leroy@csgroup.eu
|
|
Add kuap_lock() and call it when entering interrupts from user.
It is called kuap_lock() as it is similar to kuap_save_and_lock()
without the save.
However book3s/32 already have a kuap_lock(). Rename it
kuap_lock_addr().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4437e2deb9f6f549f7089d45e9c6f96a7e77905a.1634627931.git.christophe.leroy@csgroup.eu
|
|
__kuap_assert_locked() is redundant with
__kuap_get_and_assert_locked().
Move the verification of CONFIG_PPC_KUAP_DEBUG in kuap_assert_locked()
and make it call __kuap_get_and_assert_locked() directly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a60198a25d2ba38a37f1b92bc7d096435df4224.1634627931.git.christophe.leroy@csgroup.eu
|
|
Today, every platform checks that KUAP is not de-activated
before doing the real job.
Move the verification out of platform specific functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/894f110397fcd248e125fb855d1e863e4e633a0d.1634627931.git.christophe.leroy@csgroup.eu
|
|
Make the following functions generic to all platforms.
- bad_kuap_fault()
- kuap_assert_locked()
- kuap_save_and_lock() (PPC32 only)
- kuap_kernel_restore()
- kuap_get_and_assert_locked()
And for all platforms except book3s/64
- allow_user_access()
- prevent_user_access()
- prevent_user_access_return()
- restore_user_access()
Prepend __ in front of the name of platform specific ones.
For now the generic just calls the platform specific, but
next patch will move redundant parts of specific functions
into the generic one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eaef143a8dae7288cd34565ffa7b49c16aee1ec3.1634627931.git.christophe.leroy@csgroup.eu
|
|
Calling 'mfsr' to get the content of segment registers is heavy,
in addition it requires clearing of the 'reserved' bits.
In order to avoid this operation, save it in mm context and in
thread struct.
The saved sr0 is the one used by kernel, this means that on
locking entry it can be used as is.
For unlocking, the only thing to do is to clear SR_NX.
This improves null_syscall selftest by 12 cycles, ie 4%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02baf2ed8f09bad910dfaeeb7353b2ae6830525.1634627931.git.christophe.leroy@csgroup.eu
|
|
When interrupt and syscall entries where converted to C, KUEP locking
and unlocking was also converted. It improved performance by unrolling
the loop, and allowed easily implementing boot time deactivation of
KUEP.
However, null_syscall selftest shows that KUEP is still heavy
(361 cycles with KUEP, 212 cycles without).
A way to improve more is to group 'mtsr's together, instead of
repeating 'addi' + 'mtsr' several times.
In order to do that, more registers need to be available. In C, GCC
will always be able to provide the requested number of registers, but
at the cost of saving some data on the stack, which is counter
performant here.
So let's do it in assembly, when we have full control of which
register can be used. It also has the advantage of locking earlier
and unlocking later and it helps GCC generating less tricky code.
The only drawback is to make boot time deactivation less straight
forward and require 'hand' instruction patching.
Group 'mtsr's by 4.
With this change, null_syscall selftest reports 336 cycles. Without
the change it was 361 cycles, that's a 7% reduction.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/115cb279e9b9948dfd93a065e047081c59e3a2a6.1634627931.git.christophe.leroy@csgroup.eu
|
|
Disabling KUEP at boottime makes things unnecessarily complex.
Still allow disabling KUEP at build time, but when it's built-in
it is always there.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/96f583f82423a29a4205c60b9721079111b35567.1634627931.git.christophe.leroy@csgroup.eu
|
|
At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the
value contained in regs->kuap. However, when regs->kuap contains
0xffffffff it means that KUAP was not unlocked so calling kuap_unlock()
is unrelevant and results in jeopardising the contents of kernel space
segment registers.
So check that regs->kuap doesn't contain KUAP_NONE before calling
kuap_unlock(). In the meantime it also means that if KUAP has not
been correcly locked back at interrupt exit, it must be locked
before continuing. This is done by checking the content of
current->thread.kuap which was returned by kuap_get_and_assert_locked()
Fixes: 16132529cee5 ("powerpc/32s: Rework Kernel Userspace Access Protection")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu
|
|
Commit b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C")
removed the 'isync' instruction after adding/removing NX bit in user
segments. The reasoning behind this change was that when setting the
NX bit we don't mind it taking effect with delay as the kernel never
executes text from userspace, and when clearing the NX bit this is
to return to userspace and then the 'rfi' should synchronise the
context.
However, it looks like on book3s/32 having a hash page table, at least
on the G3 processor, we get an unexpected fault from userspace, then
this is followed by something wrong in the verification of MSR_PR
at end of another interrupt.
This is fixed by adding back the removed isync() following update
of NX bit in user segment registers. Only do it for cores with an
hash table, as 603 cores don't exhibit that problem and the two isync
increase ./null_syscall selftest by 6 cycles on an MPC 832x.
First problem: unexpected WARN_ON() for mysterious PROTFAULT
WARNING: CPU: 0 PID: 1660 at arch/powerpc/mm/fault.c:354 do_page_fault+0x6c/0x5b0
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Not tainted 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c001b5c8 LR: c001b6f8 CTR: 00000000
REGS: e2d09e40 TRAP: 0700 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00021032 <ME,IR,DR,RI> CR: 42d04f30 XER: 20000000
GPR00: c000424c e2d09f00 c301b680 e2d09f40 0000001e 42000000 00cba028 00000000
GPR08: 08000000 48000010 c301b680 e2d09f30 22d09f30 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000000 c1efa6c0 00cba02c 00000300 e2d09f40
NIP [c001b5c8] do_page_fault+0x6c/0x5b0
LR [c001b6f8] do_page_fault+0x19c/0x5b0
Call Trace:
[e2d09f00] [e2d09f04] 0xe2d09f04 (unreliable)
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4
--- interrupt: 300 at 0xa7a261dc
NIP: a7a261dc LR: a7a253bc CTR: 00000000
REGS: e2d09f40 TRAP: 0300 Not tainted (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 228428e2 XER: 20000000
DAR: 00cba02c DSISR: 42000000
GPR00: a7a27448 afa6b0e0 a74c35c0 a7b7b614 0000001e a7b7b614 00cba028 00000000
GPR08: 00020fd9 00000031 00cb9ff8 a7a273b0 220028e2 00c1fff0 00cba000 a7b7ba4c
GPR16: 00000031 00000000 00000000 00000000 00000000 00000000 a7b7b0d0 00c5c010
GPR24: a7b7b64c a7b7d2f0 00000004 00000002 0000001e a7b7b614 a7b7aff4 00000030
NIP [a7a261dc] 0xa7a261dc
LR [a7a253bc] 0xa7a253bc
--- interrupt: 300
Instruction dump:
7c4a1378 810300a0 75278410 83820298 83a300a4 553b018c 551e0036 4082038c
2e1b0000 40920228 75280800 41820220 <0fe00000> 3b600000 41920214 81420594
Second problem: MSR PR is seen unset allthough the interrupt frame shows it set
kernel BUG at arch/powerpc/kernel/interrupt.c:458!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1660 Comm: Xorg Tainted: G W 5.13.0-pmac-00028-gb3c15b60339a #40
NIP: c0011434 LR: c001629c CTR: 00000000
REGS: e2d09e70 TRAP: 0700 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42d09f30 XER: 00000000
GPR00: 00000000 e2d09f30 c301b680 e2d09f40 83440000 c44d0e68 e2d09e8c 00000000
GPR08: 00000002 00dc228a 00004000 e2d09f30 22d09f30 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [c0011434] interrupt_exit_kernel_prepare+0x10/0x70
LR [c001629c] interrupt_return+0x9c/0x144
Call Trace:
[e2d09f30] [c000424c] DataAccess_virt+0xd4/0xe4 (unreliable)
--- interrupt: 300 at 0xa09be008
NIP: a09be008 LR: a09bdfe8 CTR: a09bdfc0
REGS: e2d09f40 TRAP: 0300 Tainted: G W (5.13.0-pmac-00028-gb3c15b60339a)
MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 420028e2 XER: 20000000
DAR: a539a308 DSISR: 0a000000
GPR00: a7b90d50 afa6b2d0 a74c35c0 a0a8b690 a0a8b698 a5365d70 a4fa82a8 00000004
GPR08: 00000000 a09bdfc0 00000000 a5360000 a09bde7c 00c1fff0 afa6ceb4 00c26144
GPR16: 00c25fb8 00c26140 afa6ceb8 90000000 00c944d8 0000001c 00000000 00200000
GPR24: 00000000 000001fb afa6d1b4 00000001 00000000 a539a2a0 a530fd80 00000089
NIP [a09be008] 0xa09be008
LR [a09bdfe8] 0xa09bdfe8
--- interrupt: 300
Instruction dump:
80010024 83e1001c 7c0803a6 4bffff80 3bc00800 4bffffd0 486b42fd 4bffffcc
81430084 71480002 41820038 554a0462 <0f0a0000> 80620060 74630001 40820034
Fixes: b5efec00b671 ("powerpc/32s: Move KUEP locking/unlocking in C")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4856f5574906e2aec0522be17bf3848a22b2cd0b.1629269345.git.christophe.leroy@csgroup.eu
|
|
prevent_user_access() doesn't use anymore to/from/size parameters.
Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b7113662fd2c26e4c33e9d705de324bd3860822e.1622708530.git.christophe.leroy@csgroup.eu
|
