kernel - Hosts the 0x221E linux distro kernel.

index : kernel

Hosts the 0x221E linux distro kernel.

Ubuntu

summary refs log tree commit diff

path: root/tools/perf/scripts

diff options

Diffstat (limited to 'tools/perf/scripts')

0 files changed, 0 insertions, 0 deletions

-ecovec24/setup.c?h=linux-6.6.y&id=010629436d83dc6a5c489847b0a1b8d5449a962f'>mmc: sh_mobile_sdhi: remove obsolete include fileWolfram Sang A few SH boards include the file but don't make use of it (no named interrupts). The SDHI code removed support for this feature as well. So, drop the references and ultimately remove the unneeded file. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rich Felker <dalias@libc.org> Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 2015-11-17[media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 2015-11-17[media] include/media: split I2C headers from V4L2 coreMauro Carvalho Chehab Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 2015-03-05mmc: sh_mobile_sdhi: remove sh_mobile_sdhi_infoKuninori Morimoto Current sh_mobile_sdhi's platform data is set via sh_mobile_sdhi_info and it is just copied to tmio_mmc_data. Now, tmio mmc platform data is specified via tmio_mmc_data. This patch replace sh_mobile_sdhi_info to tmio_mmc_data struct sh_mobile_sdhi_info { -> struct tmio_mmc_data { int dma_slave_tx; -> void *chan_priv_tx; int dma_slave_rx; -> void *chan_priv_rx; unsigned long tmio_flags; -> unsigned long flags; unsigned long tmio_caps; -> unsigned long capabilities; unsigned long tmio_caps2; -> unsigned long capabilities2; u32 tmio_ocr_mask; -> u32 ocr_mask; unsigned int cd_gpio; -> unsigned int cd_gpio; }; unsigned int hclk; void (*set_pwr)(...); void (*set_clk_div)(...); }; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 2014-06-28ASoC: fsi: use SNDRV_DMA_TYPE_DEV for sound bufferKuninori Morimoto Current fsi driver is using SNDRV_DMA_TYPE_CONTINUOUS for snd_pcm_lib_preallocate_pages_for_all(). But, it came from original dma-sh7760.c, and no longer needed. This patch exchange its parameter, and removed original dma mapping and un-needed dma_sync_single_xxx() from driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org> 2014-03-14ASoC: fsi: fixup SND_SOC_DAIFMT_CBx_CFx flagsKuninori Morimoto SND_SOC_DAIFMT_CBx_CFx means "codec" side master/slave mode. Then, FSI will be master mode if it was SND_SOC_DAIFMT_CBS_CFS. This patch fixup platform settings too. Then, it tidyups SND_SOC_DAIFMT_INV settings. Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org> 2013-12-16Merge tag 'v3.13-rc4' into nextDmitry Torokhov Synchronize with mainline to bring in the new keycode definitions and new hwmon API. 2013-11-25Input: tsc2007 - add device tree support.Denis Carikli Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2013-09-25sh: ecovec: fixup compile error on sdhiKuninori Morimoto afa2c9407f8908 ("sh: ecovec24: Use MMC/SDHI CD and RO GPIO") added .tmio_flags = TMIO_MMC_USE_GPIO_CD on sh_mobile_sdhi_info, but it needs <linux/mfd/tmio.h> header. This patch adds it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Chris Ball <cjb@laptop.org> 2013-09-10Merge tag 'mmc-updates-for-3.12-rc1' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.12: Core: - Support Allocation Units 8MB-64MB in SD3.0, previous max was 4MB. - The slot-gpio helper can now handle GPIO debouncing card-detect. - Read supported voltages from DT "voltage-ranges" property. Drivers: - dw_mmc: Add support for ARC architecture, and support exynos5420. - mmc_spi: Support CD/RO GPIOs. - sh_mobile_sdhi: Add compatibility for more Renesas SoCs. - sh_mmcif: Add DT support for DMA channels" * tag 'mmc-updates-for-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (50 commits) Revert "mmc: tmio-mmc: Remove .set_pwr() callback from platform data" mmc: dw_mmc: Add support for ARC mmc: sdhci-s3c: initialize host->quirks2 for using quirks2 mmc: sdhci-s3c: fix the wrong register value, when clock is disabled mmc: esdhc: add support to get voltage from device-tree mmc: sdhci: get voltage from sdhc host mmc: core: parse voltage from device-tree mmc: omap_hsmmc: use the generic config for omap2plus devices mmc: omap_hsmmc: clear status flags before starting a new command mmc: dw_mmc: exynos: Add a new compatible string for exynos5420 mmc: sh_mmcif: revision-specific CLK_CTRL2 handling mmc: sh_mmcif: revision-specific Command Completion Signal handling mmc: sh_mmcif: add support for Device Tree DMA bindings mmc: sh_mmcif: move header include from header into .c mmc: SDHI: add DT compatibility strings for further SoCs mmc: dw_mmc-pci: enable bus-mastering mode mmc: dw_mmc-pci: get resources from a proper BAR mmc: tmio-mmc: Remove .set_pwr() callback from platform data mmc: tmio-mmc: Remove .get_cd() callback from platform data mmc: sh_mobile_sdhi: Remove .set_pwr() callback from platform data ... 2013-09-06Merge tag 'boards-for-linus' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board updates for 3.12. Again, a bit of domain overlap with SoC and DT branches, but most of this is around legacy code and board support. We've found that platform maintainers have a hard time separating all of these out and might move towards fewer branches for next release. - Removal of a number of Marvell Kirkwood board files, since contents is now common and mostly configured via DT. - Device-tree updates for Marvell Dove, including irqchip and clocksource setup. - Defconfig updates. Gotta go somewhere. One new one for Renesas Lager. - New backlight drivers for backlights used on Renesas shmobile platforms. - Removal of Renesas leds driver. - Shuffling of some of the new Broadcom platforms to give room for others in the same mach directory. More in 3.13" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion ARM: bcm: Make secure API call optional ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers) ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona ARM: bcm: Rename board_bcm mmc: sdhci-bcm-kona: make linker-section warning go away ARM: tegra: defconfig updates ARM: dove: add initial DT file for Globalscale D2Plug ARM: dove: add GPIO IR receiver node to SolidRun CuBox ARM: dove: add common pinmux functions to DT ARM: dove: add cpu device tree node ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument ARM: kirkwood: fix DT building and update defconfig ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code ARM: configs: disable DEBUG_LL in bcm_defconfig ARM: bcm281xx: Board specific reboot code ARM bcm281xx: Turn on socket & network support. ARM: bcm281xx: Turn on L2 cache. ... 2013-08-24sh: ecovec24: Remove MMCIF and SDHI .set_pwr() callbacksLaurent Pinchart The MMCIF and SHDI platform data .set_pwr() callbacks are used to control the vmmc/vqmmc power supplies. As the power supplies already register control GPIOs there's no need to perform the operation manually. Remove the callback functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 2013-08-24sh: ecovec24: Remove mmcif .down_pwr() callbackLaurent Pinchart The callback isn't used by the mmcif driver, don't initialize it in board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 2013-08-24sh: ecovec24: Use MMC/SDHI CD and RO GPIOLaurent Pinchart Pass the CD and RO GPIO numbers to the MMC SPI and SDHI drivers and remove the custom .get_cd() and .get_ro() callback functions. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org> 2013-08-20sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'Sergei Shtylyov Now that the 'register_type' field of the 'sh_eth' driver's platform data is not used by the driver anymore, it's time to remove it and its initializers from the SH platform code. Also move *enum* declaring values for this field from <linux/sh_eth.h> to the local driver's header file as they're only needed by the driver itself now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-07-17sh: ecovec24: Use gpio-backlightLaurent Pinchart Replace the backlight callback with a gpio-backlight platform device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> 2013-06-07sh_eth: get SH7724 support out of #ifdefSergei Shtylyov Get the SH7724 code/data in the driver out of #ifdef by adding "r8a7724-ether" to the platform driver's ID table. Change the Ether platform device's name in the SH platform code accordingly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2013-04-02usb: renesas_usbhs: fixup sparse errors for common.cKuninori Morimoto This patch fixup below sparse errors CHECK ${RENESAS_USB}/common.c ${RENESAS_USB}/common.c:313:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:322:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:384:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:524:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:545:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:574:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:606:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/mod_gadget.c:233:28: warning: symbol 'req_clear_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:274:28: warning: symbol 'req_set_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:375:28: warning: symbol 'req_get_status' was not declared. Should it be static? [ balbi@ti.com : added three sparse fixes to mod_gadget.c ] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> 2013-02-11Merge remote-tracking branch 'asoc/topic/simple-card' into asoc-nextMark Brown 2013-02-11Merge remote-tracking branch 'asoc/topic/fsi' into asoc-nextMark Brown 2013-01-16sh: ecovec: add sample amixer settingsKuninori Morimoto FSI - DA7210 needs amixer settings to use it. This patch adds quick setting guide Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 2013-01-14ASoC: simple-card: add asoc_simple_dai for initializingKuninori Morimoto Current simple-card driver calls asoc_simple_card_dai_init() if platform had a asoc_simple_card_dai_init pointer. And, this initialization function works only when platform has an applicable initial value for each dai settings. And basically, almost all sound card requires certain initialization. This means that almost all platform has initialization settings, and driver do nothing if it doesn't have settings. And additionally, current simple-card supports sysclk settings but it was only for codec. In order to abolish deviation between cpu and codec, and in order to simplify processing, this patch adds asoc_simple_dai, and removed pointless struct asoc_simple_dai_init_info which was trigger of calling asoc_simple_card_dai_init(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-12-24ASoC: fsi: remove SH_FSI_xxx_INV flagsKuninori Morimoto 3449f5fab8c51e37a8a48bc2516588c615373191 (ASoC: fsi: add SND_SOC_DAIFMT_INV_xxx support) added clock inversion support via snd_soc_dai_set_fmt(). Thus, this patch removed SH_FSI_xxx_INV and fsi_get_info() from fsi driver, and modified platform settings to use new style. Then, it cleaned up meaningless settings from platform. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2012-11-21sh: ecovec24: Remove unused get_brightness LCDC callbackLaurent Pinchart Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org>


context:
space:
mode: