kernel - Hosts the 0x221E linux distro kernel.

index : kernel

Hosts the 0x221E linux distro kernel.

Ubuntu

summary refs log tree commit diff

path: root/tools/perf/scripts/python/stackcollapse.py

diff options

Diffstat (limited to 'tools/perf/scripts/python/stackcollapse.py')

0 files changed, 0 insertions, 0 deletions

ot sure what would be the correct way, so my apologies for ruining your inbox. The 00-INDEX files are supposed to give a summary of all files present in a directory, but these files are horribly out of date and their usefulness is brought into question. Often a simple "ls" would reveal the same information as the filenames are generally quite descriptive as a short introduction to what the file covers (it should not surprise anyone what Documentation/sched/sched-design-CFS.txt covers) A few years back it was mentioned that these files were no longer really needed, and they have since then grown further out of date, so perhaps it is time to just throw them out. A short status yields the following _outdated_ 00-INDEX files, first counter is files listed in 00-INDEX but missing in the directory, last is files present but not listed in 00-INDEX. List of outdated 00-INDEX: Documentation: (4/10) Documentation/sysctl: (0/1) Documentation/timers: (1/0) Documentation/blockdev: (3/1) Documentation/w1/slaves: (0/1) Documentation/locking: (0/1) Documentation/devicetree: (0/5) Documentation/power: (1/1) Documentation/powerpc: (0/5) Documentation/arm: (1/0) Documentation/x86: (0/9) Documentation/x86/x86_64: (1/1) Documentation/scsi: (4/4) Documentation/filesystems: (2/9) Documentation/filesystems/nfs: (0/2) Documentation/cgroup-v1: (0/2) Documentation/kbuild: (0/4) Documentation/spi: (1/0) Documentation/virtual/kvm: (1/0) Documentation/scheduler: (0/2) Documentation/fb: (0/1) Documentation/block: (0/1) Documentation/networking: (6/37) Documentation/vm: (1/3) Then there are 364 subdirectories in Documentation/ with several files that are missing 00-INDEX alltogether (and another 120 with a single file and no 00-INDEX). I don't really have an opinion to whether or not we /should/ have 00-INDEX, but the above 00-INDEX should either be removed or be kept up to date. If we should keep the files, I can try to keep them updated, but I rather not if we just want to delete them anyway. As a starting point, remove all index-files and references to 00-INDEX and see where the discussion is going. Signed-off-by: Henrik Austad <henrik@austad.us> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Just-do-it-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: [Almost everybody else] Signed-off-by: Jonathan Corbet <corbet@lwn.net> 2017-10-23Documentation: leds: Update 00-INDEX fileJacek Anaszewski Add missing entries for the following documentation files: - leds-class-flash.txt - leds-lm3556.txt - leds-mlxcpld.txt - ledtrig-usbport.txt - uleds.txt Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> 2017-03-17Documentaion: leds: leds-lp55xx.txt: Fix typosTamara Diaconita Fix spelling mistakes in leds-lp55xx.txt file to make documentation clear. Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> 2017-01-29leds: class: Add new optional brightness_hw_changed attributeHans de Goede Some LEDs may have their brightness level changed autonomously (outside of kernel control) by hardware / firmware. This commit adds support for an optional brightness_hw_changed attribute to signal such changes to userspace (if a driver can detect them): What: /sys/class/leds/<led>/brightness_hw_changed Date: January 2017 KernelVersion: 4.11 Description: Last hardware set brightness level for this LED. Some LEDs may be changed autonomously by hardware/firmware. Only LEDs where this happens and the driver can detect this, will have this file. This file supports poll() to detect when the hardware changes the brightness. Reading this file will return the last brightness level set by the hardware, this may be different from the current brightness. Drivers which want to support this, simply add LED_BRIGHT_HW_CHANGED to their flags field and call led_classdev_notify_brightness_hw_changed() with the hardware set brightness when they detect a hardware / firmware triggered brightness change. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> 2016-11-22leds/leds-lp5523.txt: make documentation match realityPavel Machek Files are visible all the time, so remove incorrect notes. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-11-22leds: Introduce userspace LED class driverDavid Lechner This driver creates a userspace leds driver similar to uinput. New LEDs are created by opening /dev/uleds and writing a uleds_user_dev struct. A new LED class device is registered with the name given in the struct. Reading will return a single byte that is the current brightness. The poll() syscall is also supported. It will be triggered whenever the brightness changes. Closing the file handle to /dev/uleds will remove the leds class device. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-10-04Merge branch 'for-next' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED driver updates from Jacek Anaszewski: "Three new LED class drivers and some minor fixes and improvementes to the leds-gpio driver, LED Trigger core and documentation" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: triggers: Check return value of kobject_uevent_env() leds: triggers: Return from led_trigger_set() if there is nothing to do leds: gpio: fix and simplify error handling in gpio_leds_create leds: gpio: switch to managed version of led_classdev_register leds: gpio: fix and simplify reading property "label" leds: gpio: simplify gpio_leds_create leds: gpio: add helper cdev_to_gpio_led_data leds: gpio: fix an unhandled error case in create_gpio_led leds: gpio: introduce gpio_blink_set_t leds: add driver for Mellanox systems LEDs Documentation: move oneshot trigger attributes documentation to ABI leds: centralize definition of "default-state" property leds: add PM8058 LEDs driver leds: pm8058: add device tree bindings leds: do not overflow sysfs buffer in led_trigger_show leds: make triggers explicitly non-modular DT: leds: Add bindings for ISSI is31fl319x leds: is31fl319x: 1/3/6/9-channel light effect led driver 2016-09-27usb: core: Introduce a USB port LED triggerRafał Miłecki This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-09-15leds: add driver for Mellanox systems LEDsVadim Pasternak This makes it possible to create a set of LEDs for Mellanox systems: "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740", "msn2100". Driver obtains LED devices according to system configuration, provided through system DMI data, like mlxcpld:fan1:green, mlxcpld:fan1:red and creates devices in form: "devicename:colour:function". LED setting is controlled through on board CPLD Lattice device. For setting particular LED off, solid, blink: echo 0 > /sys/class/leds/mlxcpld\:status\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:status\:green/brightness echo timer > /sys/class/leds/mlxcpld\:status\:green/trigger On module probing all LEDs are set green, on removing - off. Last setting overwrites previous, f.e. sequence for changing LED from green - red - green: echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:red/brightness echo 1 > /sys/class/leds/mlxcpld\:psu\:green/brightness Note: LEDs cannot be turned on/off simultaneously. The Kconfig currently controlling compilation of this code is: drivers/leds/Kconfig:config LEDS_MLXCPLD Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-08-29Documentation: move oneshot trigger attributes documentation to ABIRafał Miłecki Documentation of sysfs interface should be in ABI in the first place. This moves relevant part of documentation and mentions where to look for it. Fix trivial typos whilst we are at it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-06-27leds: documentation: 'ide-disk' to 'disk-activity'Stephan Linz Signed-off-by: Stephan Linz <linz@li-pro.net> Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-06-08leds: core: Fix brightness setting upon hardware blinking enabledTony Makkiel Commit 76931edd54f8 ("leds: fix brightness changing when software blinking is active") changed the semantics of led_set_brightness() which according to the documentation should disable blinking upon any brightness setting. Moreover it made it different for soft blink case, where it was possible to change blink brightness, and for hardware blink case, where setting any brightness greater than 0 was ignored. While the change itself is against the documentation claims, it was driven also by the fact that timer trigger remained active after turning blinking off. Fixing that would have required major refactoring in the led-core, led-class, and led-triggers because of cyclic dependencies. Finally, it has been decided that allowing for brightness change during blinking is beneficial as it can be accomplished without disturbing blink rhythm. The change in brightness setting semantics will not affect existing LED class drivers that implement blink_set op thanks to the LED_BLINK_SW flag introduced by this patch. The flag state will be from now on checked in led_set_brightness() which will allow to distinguish between software and hardware blink mode. In the latter case the control will be passed directly to the drivers which apply their semantics on brightness set, which is disable the blinking in case of most such drivers. New drivers will apply new semantics and just change the brightness while hardware blinking is on, if possible. The issue was smuggled by subsequent LED core improvements, which modified the code that originally introduced the problem. Fixes: f1e80c07416a ("leds: core: Add two new LED_BLINK_ flags") Signed-off-by: Tony Makkiel <tony.makkiel@daqri.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> 2016-01-04Documentation: leds: Add description of brightness setting APIJacek Anaszewski This patch adds description of the LED subsystem API for setting an LED brightness. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> 2015-07-01Merge branch 'for-next' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem updates from Bryan Wu: "In this cycle, we finished to merge patches for LED Flash class driver. Other than that we have some bug fixes and new drivers for LED controllers" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits) leds:lp55xx: fix firmware loading error leds: fix max77693-led build errors leds: fix aat1290 build errors leds: aat1290: pass flags parameter to devm_gpiod_get leds: ktd2692: pass flags parameter to devm_gpiod_get drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c leds: aat1290: add support for V4L2 Flash sub-device DT: aat1290: Document handling external strobe sources leds: max77693: add support for V4L2 Flash sub-device media: Add registration helpers for V4L2 flash sub-devices v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it Documentation: leds: Add description of v4l2-flash sub-device leds: add BCM6358 LED driver leds: add DT binding for BCM6358 LED controller leds: fix brightness changing when software blinking is active Documentation: leds-lp5523: describe master fader attributes leds: lp5523: add master_fader support leds: leds-gpio: Allow compile test if !GPIOLIB leds: leds-gpio: Add missing #include <linux/of.h> gpiolib: Add missing dummies for the unified device properties interface ... 2015-06-24Merge branch 'for-linus' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Thanks to Samuel Thibault input device (keyboard) LEDs are no longer hardwired within the input core but use LED subsystem and so allow use of different triggers; Hans de Goede did a large update for the ALPS touchpad driver; we have new TI drv2665 haptics driver and DA9063 OnKey driver, and host of other drivers got various fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (55 commits) Input: pixcir_i2c_ts - fix receive error MAINTAINERS: remove non existent input mt git tree Input: improve usage of gpiod API tty/vt/keyboard: define LED triggers for VT keyboard lock states tty/vt/keyboard: define LED triggers for VT LED states Input: export LEDs as class devices in sysfs Input: cyttsp4 - use swap() in cyttsp4_get_touch() Input: goodix - do not explicitly set evbits in input device Input: goodix - export id and version read from device Input: goodix - fix variable length array warning Input: goodix - fix alignment issues Input: add OnKey driver for DA9063 MFD part Input: elan_i2c - add product IDs FW names Input: elan_i2c - add support for multi IC type and iap format Input: focaltech - report finger width to userspace tty: remove platform_sysrq_reset_seq Input: synaptics_i2c - use proper boolean values Input: psmouse - use true instead of 1 for boolean values Input: cyapa - fix a few typos in comments Input: stmpe-ts - enforce device tree only mode ... 2015-06-11Input: export LEDs as class devices in sysfsSamuel Thibault This change creates a new input handler called "leds" that exports LEDs on input devices as standard LED class devices in sysfs and allows controlling their state via sysfs or via any of the standard LED triggers. This allows to re-purpose and reassign LDEs on the keyboards to represent states other than the standard keyboard states (CapsLock, NumLock, etc). The old API of controlling input LEDs by writing into /dev/input/eventX devices is still present and will take precedence over accessing via LEDs subsystem (i.e. it may override state set by a trigger). If input device is "grabbed" then requests coming through LED subsystem will be ignored. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 2015-06-10Documentation: leds: Add description of v4l2-flash sub-deviceJacek Anaszewski This patch extends LED Flash class documention by the description of interactions with v4l2-flash sub-device. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> 2015-05-25Documentation: leds-lp5523: describe master fader attributesToshi Kikuchi Add the usage of the new attributes for master faders. Signed-off-by: Toshi Kikuchi <toshik@chromium.org> Acked-by: Milo Kim <milo.kim@ti.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>


context:
space:
mode: