summaryrefslogtreecommitdiff
path: root/scripts/ksymoops/README
diff options
context:
space:
mode:
Diffstat (limited to 'scripts/ksymoops/README')
0 files changed, 0 insertions, 0 deletions
This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-08-12orangefs: add features opMartin Brandenburg This is a new userspace operation, which will be done if the client-core version is greater than or equal to 2.9.6. This will provide a way to implement optional features and to determine which features are supported by the client-core. If the client-core version is older than 2.9.6, no optional features are supported and the op will not be done. The intent is to allow protocol extensions without relying on the client-core's current behavior of ignoring what it doesn't understand. Signed-off-by: Martin Brandenburg <martin@omnibond.com> 2016-08-08orangefs: rename remaining bits of mmap readahead cacheMartin Brandenburg This has been dormant code for many years. Parts of it were removed from the OrangeFS kernel code when it went into mainline. These bits were missed. Now the readahead cache has been resurrected in the OrangeFS userspace portions. It was renamed there, since it doesn't really have anything to do with mmap specifically, so it will be renamed here. Signed-off-by: Martin Brandenburg <martin@omnibond.com> 2016-07-05orangefs: fix namespace handlingJann Horn In orangefs_inode_getxattr(), an fsuid is written to dmesg. The kuid is converted to a userspace uid via from_kuid(current_user_ns(), [...]), but since dmesg is global, init_user_ns should be used here instead. In copy_attributes_from_inode(), op_alloc() and fill_default_sys_attrs(), upcall structures are populated with uids/gids that have been mapped into the caller's namespace. However, those upcall structures are read by another process (the userspace filesystem driver), and that process might be running in another namespace. This effectively lets any user spoof its uid and gid as seen by the userspace filesystem driver. To fix the second issue, I just construct the opcall structures with init_user_ns uids/gids and require the filesystem server to run in the init namespace. Since orangefs is full of global state anyway (as the error message in DUMP_DEVICE_ERROR explains, there can only be one userspace orangefs filesystem driver at once), that shouldn't be a problem. [ Why does orangefs even exist in the kernel if everything does upcalls into userspace? What does orangefs do that couldn't be done with the FUSE interface? If there is no good answer to those questions, I'd prefer to see orangefs kicked out of the kernel. Can that be done for something that shipped in a release? According to commit f7ab093f74bf ("Orangefs: kernel client part 1"), they even already have a FUSE daemon, and the only rational reason (apart from "but most of our users report preferring to use our kernel module instead") given for not wanting to use FUSE is one "in-the-works" feature that could probably be integated into FUSE instead. ] This patch has been compile-tested. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>