kernel - Hosts the 0x221E linux distro kernel.

index : kernel

Hosts the 0x221E linux distro kernel.

Ubuntu

summary refs log tree commit diff

path: root/include/linux/root_dev.h

diff options

Diffstat (limited to 'include/linux/root_dev.h')

0 files changed, 0 insertions, 0 deletions

available cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT cpufreq: apple-soc: Increase cluster switch timeout to 400us cpufreq: apple-soc: Use 32-bit read for status register cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1 cpufreq: apple-soc: Drop setting the PS2 field on M2+ dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq cpufreq: fix using cpufreq-dt as module cpufreq: scmi: Register for limit change notifications 2025-01-14cpufreq: Move endif to the end of Kconfig fileViresh Kumar It is possible to enable few cpufreq drivers, without the framework being enabled. This happened due to a bug while moving the entries earlier. Fix it. Fixes: 7ee1378736f0 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2024-12-23cpufreq: fix using cpufreq-dt as moduleAndreas Kemnade This driver can be built as a module since commit 3b062a086984 ("cpufreq: dt-platdev: Support building as module"), but unfortunately this caused a regression because the cputfreq-dt-platdev.ko module does not autoload. Usually, this is solved by just using the MODULE_DEVICE_TABLE() macro to export all the device IDs as module aliases. But this driver is special due how matches with devices and decides what platform supports. There are two of_device_id lists, an allow list that are for CPU devices that always match and a deny list that's for devices that must not match. The driver registers a cpufreq-dt platform device for all the CPU device nodes that either are in the allow list or contain an operating-points-v2 property and are not in the deny list. Enforce builtin compile of cpufreq-dt-platdev to make autoload work. Fixes: 3b062a086984 ("cpufreq: dt-platdev: Support building as module") Link: https://lore.kernel.org/all/20241104201424.2a42efdd@akair/ Link: https://lore.kernel.org/all/20241119111918.1732531-1-javierm@redhat.com/ Cc: stable@vger.kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reported-by: Radu Rendec <rrendec@redhat.com> Reported-by: Javier Martinez Canillas <javierm@redhat.com> [ Viresh: Picked commit log from Javier, updated tags ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2024-10-29cpufreq: add virtual-cpufreq driverDavid Dai Introduce a virtualized cpufreq driver for guest kernels to improve performance and power of workloads within VMs. This driver does two main things: 1. Sends the frequency of vCPUs as a hint to the host. The host uses the hint to schedule the vCPU threads and decide physical CPU frequency. 2. If a VM does not support a virtualized FIE(like AMUs), it queries the host CPU frequency by reading a MMIO region of a virtual cpufreq device to update the guest's frequency scaling factor periodically. This enables accurate Per-Entity Load Tracking for tasks running in the guest. Co-developed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: David Dai <davidai@google.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2024-09-04cpufreq: Drop CONFIG_ARM and CONFIG_ARM64 dependency on Arm driversRob Herring (Arm) The CONFIG_ARM and CONFIG_ARM64 dependency is redundant as all the drivers have necessary sub-arch dependency and don't depend on the architecture support. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2024-07-09cpufreq: Add Loongson-3 CPUFreq driver supportHuacai Chen Some of LoongArch processors (Loongson-3 series) support DVFS, their IOCSR.FEATURES has IOCSRF_FREQSCALE set. And they has a micro-core in the package called SMC (System Management Controller), which can be used to detect temperature, control fans, scale frequency and voltage, etc. The Loongson-3 CPUFreq driver is very simple now, it communicate with SMC, get DVFS info, set target frequency from CPUFreq core, and so on. There is a command list to interact with SMC, widely-used commands in the CPUFreq driver include: CMD_GET_VERSION: Get SMC firmware version. CMD_GET_FEATURE: Get enabled SMC features. CMD_SET_FEATURE: Enable SMC features, such as basic DVFS, BOOST. CMD_GET_FREQ_LEVEL_NUM: Get the number of all frequency levels. CMD_GET_FREQ_BOOST_LEVEL: Get the first boost frequency level. CMD_GET_FREQ_LEVEL_INFO: Get the detail info of a frequency level. CMD_GET_FREQ_INFO: Get the current frequency. CMD_SET_FREQ_INFO: Set the target frequency. In future we will add automatic frequency scaling, which is similar to Intel's HWP (HardWare P-State). Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> [ Viresh: Minor formatting cleanups, change return type of exit() to void and use devm_mutex_init() ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2024-03-19cpufreq: Move CPPC configs to common Kconfig and add RISC-VSunil V L CPPC related config options are currently defined only in ARM specific file. However, they are required for RISC-V as well. Instead of creating a new Kconfig.riscv file and duplicating them, move them to the common Kconfig file and enable RISC-V too. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20240208034414.22579-3-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 2023-09-11arch: Remove Itanium (IA-64) architectureArd Biesheuvel The Itanium architecture is obsolete, and an informal survey [0] reveals that any residual use of Itanium hardware in production is mostly HP-UX or OpenVMS based. The use of Linux on Itanium appears to be limited to enthusiasts that occasionally boot a fresh Linux kernel to see whether things are still working as intended, and perhaps to churn out some distro packages that are rarely used in practice. None of the original companies behind Itanium still produce or support any hardware or software for the architecture, and it is listed as 'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers that contributed on behalf of those companies (nor anyone else, for that matter) have been willing to support or maintain the architecture upstream or even be responsible for applying the odd fix. The Intel firmware team removed all IA-64 support from the Tianocore/EDK2 reference implementation of EFI in 2018. (Itanium is the original architecture for which EFI was developed, and the way Linux supports it deviates significantly from other architectures.) Some distros, such as Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have dropped support years ago. While the argument is being made [1] that there is a 'for the common good' angle to being able to build and run existing projects such as the Grid Community Toolkit [2] on Itanium for interoperability testing, the fact remains that none of those projects are known to be deployed on Linux/ia64, and very few people actually have access to such a system in the first place. Even if there were ways imaginable in which Linux/ia64 could be put to good use today, what matters is whether anyone is actually doing that, and this does not appear to be the case. There are no emulators widely available, and so boot testing Itanium is generally infeasible for ordinary contributors. GCC still supports IA-64 but its compile farm [3] no longer has any IA-64 machines. GLIBC would like to get rid of IA-64 [4] too because it would permit some overdue code cleanups. In summary, the benefits to the ecosystem of having IA-64 be part of it are mostly theoretical, whereas the maintenance overhead of keeping it supported is real. So let's rip off the band aid, and remove the IA-64 arch code entirely. This follows the timeline proposed by the Debian/ia64 maintainer [5], which removes support in a controlled manner, leaving IA-64 in a known good state in the most recent LTS release. Other projects will follow once the kernel support is removed. [0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/ [1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/ [2] https://gridcf.org/gct-docs/latest/index.html [3] https://cfarm.tetaneutral.net/machines/list/ [4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/ [5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/ Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 2023-06-30cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OFViresh Kumar The cpufreq-dt-platform.c driver requires CONFIG_OF to be selected. Mark it as a dependency. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306250025.savpMM8L-lkp@intel.com/ Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2023-06-27Merge tag 'cpufreq-arm-updates-6.5' of ↵Rafael J. Wysocki git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq updates for 6.5 from Viresh Kumar: "- Add support to build cpufreq-dt-platdev as module (Zhipeng Wang). - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar). - Add support for TI's AM62A7 platform (Vibhore Vardhan). - Add support for Armada's ap807 platform (Russell King (Oracle)). - Add support for StarFive JH7110 SoC (Mason Huo). - Fix voltage selection for Mediatek Socs (Daniel Golle). - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET). - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko). - Don't warn for disabling a non-existing frequency for imx6q cpufreq driver (Christoph Niedermaier). - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)." 2023-06-20cpufreq: amd-pstate: Set default governor to schedutilMario Limonciello The Kconfig currently defaults the governor to schedutil on x86_64 only when intel-pstate and SMP have been selected. If the kernel is built only with amd-pstate, the default governor should also be schedutil. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Tested-by: Perry Yuan <Perry.Yuan@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2023-06-05cpufreq: dt-platdev: Support building as moduleZhipeng Wang Make the cpufreq platdev driver as tristate so that it can be built as loadable module. Also add MODULE_LICENSE to support building as module. Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> [ Viresh: Merged two commits, included module.h ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2023-02-21Merge tag 'pm-6.3-rc1' of ↵Linus Torvalds git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add EPP support to the AMD P-state cpufreq driver, add support for new platforms to the Intel RAPL power capping driver, intel_idle and the Qualcomm cpufreq driver, enable thermal cooling for Tegra194, drop the custom cpufreq driver for loongson1 that is not necessary any more (and the corresponding cpufreq platform device), fix assorted issues and clean up code. Specifics: - Add EPP support to the AMD P-state cpufreq driver (Perry Yuan, Wyes Karny, Arnd Bergmann, Bagas Sanjaya) - Drop the custom cpufreq driver for loongson1 that is not necessary any more and the corresponding cpufreq platform device (Keguang Zhang) - Remove "select SRCU" from system sleep, cpufreq and OPP Kconfig entries (Paul E. McKenney) - Enable thermal cooling for Tegra194 (Yi-Wei Wang) - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss) - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi) - Make kobj_type structure in the cpufreq core constant (Thomas Weißschuh) - Make cpufreq_unregister_driver() return void (Uwe Kleine-König) - Make the TEO cpuidle governor check CPU utilization in order to refine idle state selection (Kajetan Puchalski) - Make Kconfig select the haltpoll cpuidle governor when the haltpoll cpuidle driver is selected and replace a default_idle() call in that driver with arch_cpu_idle() to allow MWAIT to be used (Li RongQing) - Add Emerald Rapids Xeon support to the intel_idle driver (Artem Bityutskiy) - Add ARCH_SUSPEND_POSSIBLE dependencies for ARMv4 cpuidle drivers to avoid randconfig build failures (Arnd Bergmann) - Make kobj_type structures used in the cpuidle sysfs interface constant (Thomas Weißschuh) - Make the cpuidle driver registration code update microsecond values of idle state parameters in accordance with their nanosecond values if they are provided (Rafael Wysocki) - Make the PSCI cpuidle driver prevent topology CPUs from being suspended on PREEMPT_RT (Krzysztof Kozlowski) - Document that pm_runtime_force_suspend() cannot be used with DPM_FLAG_SMART_SUSPEND (Richard Fitzgerald) - Add EXPORT macros for exporting PM functions from drivers (Richard Fitzgerald) - Remove /** from non-kernel-doc comments in hibernation code (Randy Dunlap) - Fix possible name leak in powercap_register_zone() (Yang Yingliang) - Add Meteor Lake and Emerald Rapids support to the intel_rapl power capping driver (Zhang Rui) - Modify the idle_inject power capping facility to support 100% idle injection (Srinivas Pandruvada) - Fix large time windows handling in the intel_rapl power capping driver (Zhang Rui) - Fix memory leaks with using debugfs_lookup() in the generic PM domains and Energy Model code (Greg Kroah-Hartman) - Add missing 'cache-unified' property in the example for kryo OPP bindings (Rob Herring) - Fix error checking in opp_migrate_dentry() (Qi Zheng) - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio) - Modify some power management utilities to use the canonical ftrace path (Ross Zwisler) - Correct spelling problems for Documentation/power/ as reported by codespell (Randy Dunlap)" * tag 'pm-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) Documentation: amd-pstate: disambiguate user space sections cpufreq: amd-pstate: Fix invalid write to MSR_AMD_CPPC_REQ dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables PM: Add EXPORT macros for exporting PM functions cpuidle: psci: Do not suspend topology CPUs on PREEMPT_RT MIPS: loongson32: Drop obsolete cpufreq platform device powercap: intel_rapl: Fix handling for large time window cpuidle: driver: Update microsecond values of state parameters as needed cpuidle: sysfs: make kobj_type structures constant cpuidle: add ARCH_SUSPEND_POSSIBLE dependencies PM: EM: fix memory leak with using debugfs_lookup() PM: domains: fix memory leak with using debugfs_lookup() cpufreq: Make kobj_type structure constant cpufreq: davinci: Fix clk use after free cpufreq: amd-pstate: avoid uninitialized variable use cpufreq: Make cpufreq_unregister_driver() return void OPP: fix error checking in opp_migrate_dentry() dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible ... 2023-01-20drivers/cpufreq: Remove "select SRCU"Paul E. McKenney Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2023-01-20cpufreq: loongson1: Delete obsolete driverKeguang Zhang The generic DT based cpufreq driver works for Loongson-1, so delete the old custom driver. Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2023-01-16cpufreq: remove sa1100 driverArnd Bergmann The sa11xx platform has two cpufreq drivers, one for the older StrongARM1100 SoC, and a second one for StrongARM1110. After the removal of most SA1100 based machines, this driver is unused, and only the sa1110-cpufreq driver remains. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2022-07-25cpufreq: loongson2: fix Kconfig "its" grammarRandy Dunlap Use the possessive "its" instead of the contraction "it's" where appropriate. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2021-04-21cpufreq: Kconfig: fix documentation linksAlexander Monakov User documentation for cpufreq governors and drivers has been moved to admin-guide; adjust references from Kconfig entries accordingly. Remove references from undocumented cpufreq drivers, as well as the 'userspace' cpufreq governor, for which no additional details are provided in the admin-guide text. Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2020-10-27cpufreq: Avoid configuring old governors as default with intel_pstateRafael J. Wysocki Commit 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") was meant to cause intel_pstate to be used in the passive mode with the schedutil governor on top of it, but it missed the case in which either "ondemand" or "conservative" was selected as the default governor in the existing kernel config, in which case the previous old governor configuration would be used, causing the default legacy governor to be used on top of intel_pstate instead of schedutil. Address this by preventing "ondemand" and "conservative" from being configured as the default cpufreq governor in the case when schedutil is the default choice for the default governor setting. [Note that the default cpufreq governor can still be set via the kernel command line if need be and that choice is not limited, so if anyone really wants to use one of the legacy governors by default, it can be achieved this way.] Fixes: 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") Reported-by: Julia Lawall <julia.lawall@inria.fr> Cc: 5.8+ <stable@vger.kernel.org> # 5.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> 2020-07-30cpufreq: make schedutil the default for arm and arm64Valentin Schneider schedutil is already a hard-requirement for EAS, which has lead to making it default on arm (when CONFIG_BIG_LITTLE), see: commit 8fdcca8e254a ("cpufreq: Select schedutil when using big.LITTLE") One thing worth pointing out is that schedutil isn't only relevant for asymmetric CPU capacity systems; for instance, schedutil is the only governor that honours util-clamp performance requests. Another good example of this is x86 switching to using it by default in: commit a00ec3874e7d ("cpufreq: intel_pstate: Select schedutil as the default governor") Arguably it should be made the default for all architectures, but it seems better to wait for them to also gain frequency invariance powers. Make it the default for arm && arm64 for now. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2020-05-08cpufreq: qoriq: Add platform dependenciesGeert Uytterhoeven The Freescale QorIQ clock controller is only present on Freescale E500MC and Layerscape SoCs. Add platform dependencies to the QORIQ_CPUFREQ config symbol, to avoid asking the user about it when configuring a kernel without E500MC or Layerscape support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> 2020-04-03cpufreq: Select schedutil when using big.LITTLELinus Walleij When we are using a system with big.LITTLE HMP configuration, we need to use EAS to schedule the system. As can be seen from kernel/sched/topology.c: "EAS can be used on a root domain if it meets all the following conditions: 1. an Energy Model (EM) is available; 2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy. 3. no SMT is detected. 4. the EM complexity is low enough to keep scheduling overheads low; 5. schedutil is driving the frequency of all CPUs of the rd;" This means that at the very least, schedutil needs to be available as a scheduling policy for EAS to work on these systems. Make this explicit by defaulting to the schedutil governor if BIG_LITTLE is selected. Currently users of the TC2 board (like me) has to figure these dependencies out themselves and it is not helpful. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2020-03-26cpufreq: intel_pstate: Select schedutil as the default governorRafael J. Wysocki Modify cpufreq Kconfig to select schedutil as the default governor if the intel_pstate driver has been selected and SMP support is enabled (because schedutil depends on SMP). Also select schedutil as well as the performance governor from the intel_pstate Kconfig section to ensure the equivalence of the passive and active mode governor configuration options. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-04-10cpufreq: boost: Remove CONFIG_CPU_FREQ_BOOST_SW Kconfig optionYue Hu Commit 2fb4719b2560 ("cpufreq / boost: Kconfig: Support for software-managed BOOST") added the CONFIG_CPU_FREQ_BOOST_SW config. However EXYNOS based cpufreq drivers have been removed because of switching to cpufreq-dt driver which will set boost-attr if required. So, let's remove this option and update cpufreq_generic_attr[]. Signed-off-by: Yue Hu <huyue2@yulong.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2019-01-29thermal: cpu_cooling: Require thermal core to be compiled inAmit Kucheria The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq driver to register as a cooling device and cool down the platform by throttling the CPU frequency. In order to be able to auto-register a cpufreq driver as a cooling device from the cpufreq core, we need access to code inside cpu_cooling.c which, in turn, accesses code inside thermal core. CPU_FREQ is a bool while THERMAL is tristate. In some configurations (e.g. allmodconfig), CONFIG_THERMAL ends up as a module while CONFIG_CPU_FREQ is compiled in. This leads to following error: drivers/cpufreq/cpufreq.o: In function `cpufreq_offline': cpufreq.c:(.text+0x407c): undefined reference to `cpufreq_cooling_unregister' drivers/cpufreq/cpufreq.o: In function `cpufreq_online': cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register' Given that platforms using CPU_THERMAL usually want it compiled-in so it is available early in boot, make CPU_THERMAL depend on THERMAL being compiled-in instead of allowing it to be a module. As a result of this change, get rid of the ugly (!CPU_THERMAL || THERMAL) dependency in all cpufreq drivers using CPU_THERMAL. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>


context:
space:
mode: