summaryrefslogtreecommitdiff
path: root/tools/perf/scripts/python/bin
diff options
context:
space:
mode:
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>2020-05-15 22:47:09 +0200
committerKevin Hilman <khilman@baylibre.com>2020-05-19 16:02:14 -0700
commit53773f2dfd9c847304b184d5617e36aeafdf5d87 (patch)
tree88a0b2aa173f09e2ca73bb980a648c80203047ed /tools/perf/scripts/python/bin
parent34217df28db7cddb52120da57fd1d469e896af3d (diff)
downloadkernel-53773f2dfd9c847304b184d5617e36aeafdf5d87.tar.gz
soc: amlogic: meson-ee-pwrc: add support for the Meson GX SoCs
Add support for the Meson GX SoCs to the meson-ee-pwrc driver. The power domains on the GX SoCs are very similar to G12A. The only known differences so far are: - The GX SoCs do not have the HHI_VPU_MEM_PD_REG2 register (for the VPU power-domain) - The GX SoCs have an additional reset line called "dvin" Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20200515204709.1505498-5-martin.blumenstingl@googlemail.com
Diffstat (limited to 'tools/perf/scripts/python/bin')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.46.0) at 2026-08-18 01:22:42 +0000
-17rtw89: implement stop and resume channels transmission v1Ping-Ke Shih These function is used to stop transmitting when we are going to switch channels or do some RF calibration. Before these operations, we need to stop channel transmission and backup setting into parameter tx_en. After operations are done, resume transmitting by backup parameter tx_en. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-13-pkshih@realtek.com 2022-03-17rtw89: extend mac tx_en bits from 16 to 32Ping-Ke Shih In order to support 8852C that uses 32 bits to control TX types. This patch doesn't really use 32 bits tx_en yet, but next patch will use it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-12-pkshih@realtek.com 2022-03-17rtw89: change value assignment style of rtw89_mac_cfg_gnt()Ping-Ke Shih Use if() style would be clear than "? :", because the else cases are always 0. The read val from rtw89_mac_read_lte() isn't used, so remove this statement. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-11-pkshih@realtek.com 2022-03-17rtw89: 8852c: add mac_ctrl_path and mac_cfg_gnt APIsChia-Yuan Li The BT-coexistence uses these function to control antenna and TDMA, so implement the variant type to support all chips. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-10-pkshih@realtek.com 2022-03-17rtw89: disable FW and H2C function if CPU disabledChia-Yuan Li Initialize FW status and disabled H2C function if CPU disabled. Then, it can reset to initial state. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-9-pkshih@realtek.com 2022-03-17rtw89: initialize preload window of D-MACPing-Ke Shih 8852C add new hardware feature -- preload window, which is used to load more data to D-MAC, so it can possibly yield better performance. This patch is to configure preload and reserved size for next window. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-8-pkshih@realtek.com 2022-03-17rtw89: modify MAC enable functionsChia-Yuan Li Modify functions that control D-MAC (data MAC) and LDO to support variant chips. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-7-pkshih@realtek.com 2022-03-10rtw89: support DAV efuse reading operationPing-Ke Shih DAV is an another efuse region that new chip, like 8852C, has this region. Extend the code to read it, and convert the physical map to logical map followed by original logical map. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-12-pkshih@realtek.com 2022-03-10rtw89: 8852c: add chip::dle_memPing-Ke Shih These tables are used to configure hardware buffer size according to operating mode. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-11-pkshih@realtek.com 2022-03-10rtw89: add page_regs to handle v1 chipsPing-Ke Shih These registers are used to configure and access page size of HCI. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-10-pkshih@realtek.com 2022-03-10rtw89: add hci_func_en_addr to support variant generationPing-Ke Shih The HCI_FUNC_EN address of 8852C is different from existing chipset, so add a chip_info::hci_func_en_addr to fill the address individually. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-8-pkshih@realtek.com 2022-03-10rtw89: add power_{on/off}_funcPing-Ke Shih New chipset uses individual power_{on/off} functions to replace old power sequences, because it is hard to represent new complicated flow in a sequence table. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220307060457.56789-7-pkshih@realtek.com 2022-03-09rtw89: add tx_wake notify for low ps modeChin-Yen Lee We found management frames get stuck when wifi chip enters low ps mode. So we add one notify wake function to trigger wifi chip into normal mode before forwarding management frames. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220225030851.13327-3-pkshih@realtek.com 2022-03-09rtw89: 8852a: add ieee80211_ops::hw_scanPo Hao Huang Declare this function allows us to use customized scanning policy, so each scan takes less time. This is a similar implementation to hw_scan in rtw88, except that we offload more items to firmware and extend the maximum IE length. For backward compatibility, we fallback to sw_scan when firmware does not support this feature. Signed-off-by: Po Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220225030851.13327-2-pkshih@realtek.com 2022-02-10rtw89: coex: set EN bit to PLT registerPing-Ke Shih B_AX_PLT_EN is to enable polluted mechanism. If it is enabled and gnt_bt = 1 while wlan TX, B_AX_BT_PLT_PKT_CNT counter will increase, but TX counter to BB will not. Without this bit BTCoex mechanism might have some problems. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208082751.43553-1-pkshih@realtek.com 2022-02-10rtw89: maintain assoc/disassoc STA states of firmware and hardwarePing-Ke Shih In AP mode, when a STA associate to us, we need to create an entry in firmware and hardware, and then they can transmit data properly. The entry index called mac_id which is assigned when sta_add, and we ask firmware to create an entry for an associated station. Also, the address CAM should be filled so hardware can know which packet is ours, and lookup the mac_id for further use. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220207063900.43643-5-pkshih@realtek.com 2022-02-10rtw89: extend role_maintain to support AP modePing-Ke Shih Fill mac_id and self_role depends on the operation mode. In AP mode, echo connected station has an unique mac_id, and each vif also has one mac_id to represent itself. The self_role is assigned to vif if the operation mode is decided, and RTW89_SELF_ROLE_AP_CLIENT is assigned to the connected STA in AP mode, Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220207063900.43643-2-pkshih@realtek.com 2022-01-28rtw89: fix maybe uninitialized `qempty` variableÍñigo Huguet Call to dle_dfi_qempty might fail, leaving qempty.qempty untouched, which is latter used to control the for loop. If that happens, it's not initialized anywhere. Initialize it so the loop doesn't iterate unless it's modified by the call to dle_dfi_qempty. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220113094253.73370-1-ihuguet@redhat.com 2022-01-28rtw89: configure mac port HIQ registersPing-Ke Shih HIQ is short for high queue that is used to send broadcast/multicast packets right after TBTT in AP mode. Two registers, DTIM and window size, are configured accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-10-pkshih@realtek.com 2022-01-28rtw89: rename vif_maintain to role_maintainPing-Ke Shih The H2C_FUNC_MAC_FWROLE_MAINTAIN also maintains the roles of all connected stations; not just the role of VIF. So, I correct the name, but don't change the logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-9-pkshih@realtek.com 2022-01-28rtw89: extend firmware commands on states of sta_assoc and sta_disconnectPing-Ke Shih The h2c_join firmware command is used to indicate a station is connected, and the assoc_cmac_tbl firmware command is used to set CMAC table corresponding to a mac_id. Both commands must work in both station and AP modes. Use the mac_id of rtw89_sta naturally and intuitively. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-8-pkshih@realtek.com 2022-01-28rtw89: add C2H handle of BCN_CNTPing-Ke Shih This C2H notify driver the beacon count we send out. We don't handle the content for now, so add a dummy handler to avoid messages, like rtw89_pci 0000:03:00.0: c2h class 0 func 3 not support C2H: 00000000: 01 03 01 3f 0f 00 00 00 80 0a 00 00 00 00 a0 rtw89_pci 0000:03:00.0: c2h class 0 func 3 not support C2H: 00000000: 01 03 01 40 0f 00 00 00 00 03 20 00 00 00 a5 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220107034239.22002-5-pkshih@realtek.com 2022-01-28rtw89: extract modules by chipsetZong-Zhe Yang We are planning to support more chipsets, e.g. 8852C. Before that, we consider architecutre to handle multiple kinds of chipsets. Obviosuly, based on original design, rtw89_core module will have large size even if there is only one chipset under running. It is because all chipset related things are put in rtw89_core now. To reduce such overhead, we extract modules of rtw89 and adjust dependencies between modules. The following assumes that 8852AE, 8852AU, and 8852CE are all supported, we describe the difference before and after extraction. [Before extraction] ------------- |------------------------------------ | rtw89_usb | V ------------- --------------------------------------- ------------- | rtw89_core (including 8852A, 8852C) | <--- | rtw89_pci | --------------------------------------- ------------- The data of 8852A and 8852C are built in rtw89_core. And rtw89_pci is the entry of 8852AE and 8852CE. And rtw89_usb is the entry of 8852AU. [After extraction] ------------- ---------------- |----------- | rtw89_usb | <-------- | rtw89_8852au | | ------------- ---------------- V --------------- | -------------- | | <--------------- | rtw89_core | <--- | rtw89_8852a | -------------- | | <--------------- ^ ^ --------------- | | | ------------- ---------------- | | | | <-------- | rtw89_8852ae | | |----------- | rtw89_pci | ---------------- | | | <----------------- | ------------- | | --------------- ---------------- |--------------- | rtw89_8852c | <------ | rtw89_8852ce | --------------- ---------------- The data of 8852A/8852C is extracted to rtw89_8852a/rtw89_8852c. And rtw89_pci/rtw89_usb handles only common flow of pci/usb bus. Finally, 8852AE, 8852AU, and 8852CE have individual entry modules, i.e. rtw89_8852ae, rtw89_8852au, and rtw89_8852ce correspondingly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211221025828.25092-1-pkshih@realtek.com 2021-12-14rtw89: coex: Add MAC API to get BT polluted counterChing-Te Ku Add function to get and parse BT polluted counter. When WLAN Tx was dropped by BT, the packet will be marked as BT polluted. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209083229.10815-4-pkshih@realtek.com 2021-12-08rtw89: fix sending wrong rtwsta->mac_id to firmware to fill address CAMPing-Ke Shih With wrong rtwsta->mac_id, it can't send out ack properly when we receive assoc response occasionally. Then, it failed to connect an AP. The cause is that we store 'sta' and use it somewhere. To correct this, remove the variable and use mac_id in drv_priv of 'sta' or 'vif' passed by mac80211. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211201080607.11211-1-pkshih@realtek.com 2021-12-08rtw89: update scan_mac_addr during scanning periodPing-Ke Shih Update scan_mac_addr to address CAM as A1, so hardware can ACK probe response properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211111023706.14154-2-pkshih@realtek.com 2021-11-26rtw89: remove unneeded variableChangcheng Deng Fix the following coccicheck review: ./drivers/net/wireless/realtek/rtw89/mac.c: 1096: 5-8: Unneeded variable Remove unneeded variable used to store return value. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211110121135.151187-1-deng.changcheng@zte.com.cn 2021-11-26rtw89: remove unnecessary conditional operatorsYe Guojin The conditional operator is unnecessary while assigning values to the bool variables. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211104061119.1685-1-ye.guojin@zte.com.cn 2021-10-27rtw89: fix return value in hfc_pub_cfg_chkKevin Lo It seems to me when pub_cfg->grp0 + pub_cfg->grp1 != pub_cfg->pub_max is true, it should return -EFAULT rather than 0. Otherwise, the function doesn't need to exist. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXEJey8lKksAZif4@ns.kevlo.org 2021-10-18rtw89: Remove redundant check of ret after call to rtw89_mac_enable_bb_rfColin Ian King The function rtw89_mac_enable_bb_rf is a void return type, so there is no return error code to ret, so the following check for an error in ret is redundant dead code and can be removed. Addresses-Coverity: ("Logically dead code") Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211015152113.33179-1-colin.king@canonical.com 2021-10-13rtw89: add Realtek 802.11ax driverPing-Ke Shih This driver named rtw89, which is the next generation of rtw88, supports Realtek 8852AE 802.11ax 2x2 chip whose new features are OFDMA, DBCC, Spatial reuse, TWT and BSS coloring; now some of them aren't implemented though. The chip architecture is entirely different from the chips supported by rtw88 like RTL8822CE 802.11ac chip. First of all, register address ranges are totally redefined, so it's impossible to reuse register definition. To communicate with firmware, new H2C/C2H format is proposed. In order to have better utilization, TX DMA flow is changed to two stages DMA. To provide rich RX status information, additional RX PPDU packets are added. Since there are so many differences mentioned above, we decide to propose a new driver. It has many authors, they are listed in alphabetic order: Chin-Yen Lee <timlee@realtek.com> Ping-Ke Shih <pkshih@realtek.com> Po Hao Huang <phhuang@realtek.com> Tzu-En Huang <tehuang@realtek.com> Vincent Fann <vincent_fann@realtek.com> Yan-Hsuan Chuang <tony0620emma@gmail.com> Zong-Zhe Yang <kevin_yang@realtek.com> Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211008035627.19463-1-pkshih@realtek.com