summaryrefslogtreecommitdiff
path: root/tools/perf/scripts/python/bin/stackcollapse-report
diff options
context:
space:
mode:
authorLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>2025-08-12 21:03:33 +0100
committerGeert Uytterhoeven <geert+renesas@glider.be>2025-08-19 11:38:08 +0200
commit41e194978510a9910be2ed7b4d8b4edb61671a90 (patch)
treee5c97a6e6af6964759d294d5856a7ca3758c4206 /tools/perf/scripts/python/bin/stackcollapse-report
parentbe5d60d94b982d46a734750d93624bd85a1c7089 (diff)
downloadkernel-41e194978510a9910be2ed7b4d8b4edb61671a90.tar.gz
arm64: dts: renesas: r9a09g087: Add DT nodes for SCI channels 1-5
The RZ/N2H SoC exposes six SCI controllers; sci0 was already present in the SoC DTSI. Add the remaining SCI nodes (sci1-sci5). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250812200344.3253781-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Diffstat (limited to 'tools/perf/scripts/python/bin/stackcollapse-report')
0 files changed, 0 insertions, 0 deletions
A084XE01, JDI LPM102A188A, - Documentation updates to accel/ivpu. - Some nouveau scheduling/fence fixes. - Power management related fixes and other fixes to ivpu. - Assorted bridge/it66121 fixes. - Make platform drivers return void in remove() callback. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com 2023-09-21drm: Call drm_atomic_helper_shutdown() at shutdown time for misc driversDouglas Anderson Based on grepping through the source code these drivers appear to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. All of the drivers in this patch were fairly straightforward to fix since they already had a call to drm_atomic_helper_shutdown() at remove/unbind time but were just lacking one at system shutdown. The only hitch is that some of these drivers use the component model to register/unregister their DRM devices. The shutdown callback is part of the original device. The typical solution here, based on how other DRM drivers do this, is to keep track of whether the device is bound based on drvdata. In most cases the drvdata is the drm_device, so we can just make sure it is NULL when the device is not bound. In some drivers, this required minor code changes. To make things simpler, drm_atomic_helper_shutdown() has been modified to consider a NULL drm_device as a noop in the patch ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"). Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid 2023-09-15drm/komeda: add NV12 format to support writeback layer typebaozhu.liu When testing the d71 writeback layer function, the output format is set to NV12, and the following error message is displayed: [drm:komeda_fb_is_layer_supported] Layer TYPE: 4 doesn't support fb FMT: NV12 little-endian (0x3231564e) with modifier: 0x0.. Check the d71 data manual, writeback layer output formats includes NV12 format. Signed-off-by: baozhu.liu <lucas.liu@siengine.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829093004.22860-1-lucas.liu@siengine.com 2023-08-31drm/komeda: drop all currently held locks if deadlock happensbaozhu.liu If komeda_pipeline_unbound_components() returns -EDEADLK, it means that a deadlock happened in the locking context. Currently, komeda is not dealing with the deadlock properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: ------------[ cut here ]------------ [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 komeda_release_unclaimed_resources+0x13c/0x170 [ 26.117453] Modules linked in: [ 26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 [ 26.155130] sp : ffff800017b8b8d0 [ 26.158442] pmr_save: 000000e0 [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd [ 26.241158] Call trace: [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 [ 26.258929] komeda_kms_check+0x284/0x36c [ 26.262939] drm_atomic_check_only+0x40c/0x714 [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c [ 26.276787] drm_ioctl_kernel+0xc4/0x120 [ 26.280708] drm_ioctl+0x268/0x534 [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 [ 26.292817] do_el0_svc+0x24/0x90 [ 26.296132] el0_svc+0x20/0x30 [ 26.299185] el0_sync_handler+0xe8/0xf0 [ 26.303018] el0_sync+0x1a4/0x1c0 [ 26.306330] irq event stamp: 0 [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.338261] ---[ end trace 20ae984fa860184a ]--- [ 26.343021] ------------[ cut here ]------------ [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 [ 26.357727] Modules linked in: [ 26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c [ 26.393137] sp : ffff800017b8bb10 [ 26.396447] pmr_save: 000000e0 [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 [ 26.479122] Call trace: [ 26.481566] drm_modeset_drop_locks+0x84/0x90 [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c [ 26.490359] drm_ioctl_kernel+0xc4/0x120 [ 26.494278] drm_ioctl+0x268/0x534 [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 [ 26.506384] do_el0_svc+0x24/0x90 [ 26.509697] el0_svc+0x20/0x30 [ 26.512748] el0_sync_handler+0xe8/0xf0 [ 26.516580] el0_sync+0x1a4/0x1c0 [ 26.519891] irq event stamp: 0 [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.551812] ---[ end trace 20ae984fa860184b ]--- According to the call trace information,it can be located to be WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_pipeline_get_state_and_set_crtc -> komeda_pipeline_get_state ->drm_atomic_get_private_obj_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_component_get_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) return ERR_PTR(ret); Here it return -EDEADLK. deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking Therefore, handling this problem can be solved by adding return -EDEADLK back to the drm_modeset_backoff processing flow in the drm_mode_atomic_ioctl function. Signed-off-by: baozhu.liu <lucas.liu@siengine.com> Signed-off-by: menghui.huang <menghui.huang@siengine.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230804013117.6870-1-menghui.huang@siengine.com 2023-08-30Merge tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds Pull drm updates from Dave Airlie: "The drm core grew a new generic gpu virtual address manager, and new execution locking helpers. These are used by nouveau now to provide uAPI support for the userspace Vulkan driver. AMD had a bunch of new IP core support, loads of refactoring around fbdev, but mostly just the usual amount of stuff across the board. core: - fix gfp flags in drmm_kmalloc gpuva: - add new generic GPU VA manager (for nouveau initially) syncobj: - add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl dma-buf: - acquire resv lock for mmap() in exporters - support dma-buf self import automatically - docs fixes backlight: - fix fbdev interactions atomic: - improve logging prime: - remove struct gem_prim_mmap plus driver updates gem: - drm_exec: add locking over multiple GEM objects - fix lockdep checking fbdev: - make fbdev userspace interfaces optional - use linux device instead of fbdev device - use deferred i/o helper macros in various drivers - Make FB core selectable without drivers - Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT - Add helper macros and Kconfig tokens for DMA-allocated framebuffer ttm: - support init_on_free - swapout fixes panel: - panel-edp: Support AUO B116XAB01.4 - Support Visionox R66451 plus DT bindings - ld9040: - Backlight support - magic improved - Kconfig fix - Convert to of_device_get_match_data() - Fix Kconfig dependencies - simple: - Set bpc value to fix warning - Set connector type for AUO T215HVN01 - Support Innolux G156HCE-L01 plus DT bindings - ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings - startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings - sitronix-st7789v: - Support Inanbo T28CP45TN89 plus DT bindings - Support EDT ET028013DMA plus DT bindings - Various cleanups - edp: Add timings for N140HCA-EAC - Allow panels and touchscreens to power sequence together - Fix Innolux G156HCE-L01 LVDS clock bridge: - debugfs for chains support - dw-hdmi: - Improve support for YUV420 bus format - CEC suspend/resume - update EDID on HDMI detect - dw-mipi-dsi: Fix enable/disable of DSI controller - lt9611uxc: Use MODULE_FIRMWARE() - ps8640: Remove broken EDID code - samsung-dsim: Fix command transfer - tc358764: - Handle HS/VS polarity - Use BIT() macro - Various cleanups - adv7511: Fix low refresh rate - anx7625: - Switch to macros instead of hardcoded values - locking fixes - tc358767: fix hardware delays - sitronix-st7789v: - Support panel orientation - Support rotation property - Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings amdgpu: - SDMA 6.1.0 support - HDP 6.1 support - SMUIO 14.0 support - PSP 14.0 support - IH 6.1 support - Lots of checkpatch cleanups - GFX 9.4.3 updates - Add USB PD and IFWI flashing documentation - GPUVM updates - RAS fixes - DRR fixes - FAMS fixes - Virtual display fixes - Soft IH fixes - SMU13 fixes - Rework PSP firmware loading for other IPs - Kernel doc fixes - DCN 3.0.1 fixes - LTTPR fixes - DP MST fixes - DCN 3.1.6 fixes - SMU 13.x fixes - PSP 13.x fixes - SubVP fixes - GC 9.4.3 fixes - Display bandwidth calculation fixes - VCN4 secure submission fixes - Allow building DC on RISC-V - Add visible FB info to bo_print_info - HBR3 fixes - GFX9 MCBP fix - GMC10 vmhub index fix - GMC11 vmhub index fix - Create a new doorbell manager - SR-IOV fixes - initial freesync panel replay support - revert zpos properly until igt regression is fixeed - use TTM to manage doorbell BAR - Expose both current and average power via hwmon if supported amdkfd: - Cleanup CRIU dma-buf handling - Use KIQ to unmap HIQ - GFX 9.4.3 debugger updates - GFX 9.4.2 debugger fixes - Enable cooperative groups fof gfx11 - SVM fixes - Convert older APUs to use dGPU path like newer APUs - Drop IOMMUv2 path as it is no longer used - TBA fix for aldebaran i915: - ICL+ DSI modeset sequence - HDCP improvements - MTL display fixes and cleanups - HSW/BDW PSR1 restored - Init DDI ports in VBT order - General display refactors - Start using plane scale factor for relative data rate - Use shmem for dpt objects - Expose RPS thresholds in sysfs - Apply GuC SLPC min frequency softlimit correctly - Extend Wa_14015795083 to TGL, RKL, DG1 and ADL - Fix a VMA UAF for multi-gt platform - Do not use stolen on MTL due to HW bug - Check HuC and GuC version compatibility on MTL - avoid infinite GPU waits due to premature release of request memory - Fixes and updates for GSC memory allocation - Display SDVO fixes - Take stolen handling out of FBC code - Make i915_coherent_map_type GT-centric - Simplify shmem_create_from_object map_type msm: - SM6125 MDSS support - DPU: SM6125 DPU support - DSI: runtime PM support, burst mode support - DSI PHY: SM6125 support in 14nm DSI PHY driver - GPU: prepare for a7xx - fix a690 firmware - disable relocs on a6xx and newer radeon: - Lots of checkpatch cleanups ast: - improve device-model detection - Represent BMV as virtual connector - Report DP connection status nouveau: - add new exec/bind interface to support Vulkan - document some getparam ioctls - improve VRAM detection - various fixes/cleanups - workraound DPCD issues ivpu: - MMU updates - debugfs support - Support vpu4 virtio: - add sync object support atmel-hlcdc: - Support inverted pixclock polarity etnaviv: - runtime PM cleanups - hang handling fixes exynos: - use fbdev DMA helpers - fix possible NULL ptr dereference komeda: - always attach encoder omapdrm: - use fbdev DMA helpers ingenic: - kconfig regmap fixes loongson: - support display controller mediatek: - Small mtk-dpi cleanups - DisplayPort: support eDP and aux-bus - Fix coverity issues - Fix potential memory leak if vmap() fail mgag200: - minor fixes mxsfb: - support disabling overlay planes panfrost: - fix sync in IRQ handling ssd130x: - Support per-controller default resolution plus DT bindings - Reduce memory-allocation overhead - Improve intermediate buffer size computation - Fix allocation of temporary buffers - Fix pitch computation - Fix shadow plane allocation tegra: - use fbdev DMA helpers - Convert to devm_platform_ioremap_resource() - support bridge/connector - enable PM tidss: - Support TI AM625 plus DT bindings - Implement new connector model plus driver updates vkms: - improve write back support - docs fixes - support gamma LUT zynqmp-dpsub: - misc fixes" * tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits) drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map() drm/tests/drm_kunit_helpers: Place correct function name in the comment header drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly drm/nouveau: uvmm: fix unset region pointer on remap drm/nouveau: sched: avoid job races between entities drm/i915: Fix HPD polling, reenabling the output poll work as needed drm: Add an HPD poll helper to reschedule the poll work drm/i915: Fix TLB-Invalidation seqno store drm/ttm/tests: Fix type conversion in ttm_pool_test drm/msm/a6xx: Bail out early if setting GPU OOB fails drm/msm/a6xx: Move LLC accessors to the common header drm/msm/a6xx: Introduce a6xx_llc_read drm/ttm/tests: Require MMU when testing drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amdgpu: Add memory vendor information drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: Remove gfxoff check in GFX v9.4.3 drm/amd/pm: Update pci link speed for smu v13.0.6 ... 2023-08-24minmax: add in_range() macroMatthew Wilcox (Oracle) Patch series "New page table range API", v6. This patchset changes the API used by the MM to set up page table entries. The four APIs are: set_ptes(mm, addr, ptep, pte, nr) update_mmu_cache_range(vma, addr, ptep, nr) flush_dcache_folio(folio) flush_icache_pages(vma, page, nr) flush_dcache_folio() isn't technically new, but no architecture implemented it, so I've done that for them. The old APIs remain around but are mostly implemented by calling the new interfaces. The new APIs are based around setting up N page table entries at once. The N entries belong to the same PMD, the same folio and the same VMA, so ptep++ is a legitimate operation, and locking is taken care of for you. Some architectures can do a better job of it than just a loop, but I have hesitated to make too deep a change to architectures I don't understand well. One thing I have changed in every architecture is that PG_arch_1 is now a per-folio bit instead of a per-page bit when used for dcache clean/dirty tracking. This was something that would have to happen eventually, and it makes sense to do it now rather than iterate over every page involved in a cache flush and figure out if it needs to happen. The point of all this is better performance, and Fengwei Yin has measured improvement on x86. I suspect you'll see improvement on your architecture too. Try the new will-it-scale test mentioned here: https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/ You'll need to run it on an XFS filesystem and have CONFIG_TRANSPARENT_HUGEPAGE set. This patchset is the basis for much of the anonymous large folio work being done by Ryan, so it's received quite a lot of testing over the last few months. This patch (of 38): Determine if a value lies within a range more efficiently (subtraction + comparison vs two comparisons and an AND). It also has useful (under some circumstances) behaviour if the range exceeds the maximum value of the type. Convert all the conflicting definitions of in_range() within the kernel; some can use the generic definition while others need their own definition. Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 2023-07-21drm/arm/komeda: Remove component framework and add a simple encoderFaiz Abbas The Komeda driver always expects the remote connector node to initialize an encoder. It uses the component aggregator framework which consists of component->bind() calls used to initialize the remote encoder and attach it to the crtc. This makes it incompatible with connector drivers which implement drm_bridge APIs. Remove all component framework calls from the komeda driver and declare and attach an encoder inside komeda_crtc_add(). The remote connector driver has to implement the DRM bridge APIs which can be used to glue the encoder to the remote connector. Since we usually pair this with a component encoder that also implements a drm_bridge, dropping support is not expected to affect users of this driver. Signed-off-by: Faiz Abbas <faiz.abbas@arm.com> Message-ID: <20230712064937.25192-1-faiz.abbas@arm.com> [small white space fixes flagged by checkpatch.pl] Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230712064937.25192-1-faiz.abbas@arm.com 2023-07-21drm: Explicitly include correct DT includesRob Herring The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org 2023-06-08drm/komeda: Convert to platform remove callback returning voidUwe Kleine-König The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-2-u.kleine-koenig@pengutronix.de 2023-01-18drm/arm/komeda: Remove unnecessary include statements for drm_crtc_helper.hThomas Zimmermann Several source files include drm_crtc_helper.h without needing it or only to get its transitive include statements; leading to unnecessary compile-time dependencies. Drop drm_crtc_helper.h where possible. v2: * update commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-5-tzimmermann@suse.de 2023-01-13drm: Include <linux/of.h> where neededThomas Zimmermann Include <linux/of.h> in source files that need it. Some of DRM's source code gets OF header via drm_crtc_helper.h and <linux/fb.h>, which can leed to unnecessary recompilation. In drm_modes.c, add a comment on the reason for still including <linux/fb.h>. The header file is required to get KHZ2PICOS(). The macro is part of the UAPI headers, so it cannot be moved to a less prominent location. v2: * include <linux/of.h> in komeda_drv.c (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Liviu Dudau <liviu.dudau@arm.com> # komeda Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230111130206.29974-3-tzimmermann@suse.de