summaryrefslogtreecommitdiff
path: root/tools/perf/scripts/python/bin/stackcollapse-record
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2019-03-26 06:15:27 +1000
committerDave Airlie <airlied@redhat.com>2019-03-26 06:15:27 +1000
commitf144e67b0e683cbb2c476b20a93e27aa1cd9d458 (patch)
tree3d83219f702d6b2ad39e993ab2b84e2ff4086498 /tools/perf/scripts/python/bin/stackcollapse-record
parent0bec6219e5a0cf2dd17716949a7592807e10f3d7 (diff)
parent1284ec985572232ace4817476baeb2d82b60be7a (diff)
downloadkernel-f144e67b0e683cbb2c476b20a93e27aa1cd9d458.tar.gz
Merge tag 'drm-intel-next-2019-03-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes: - Report an error early instead of SIGBUS later when mmap beyond BO size Core Changes: - This includes backmerge of drm-next and two merges of Maarten's topic/hdr-formats Driver Changes: - Add Comet Lake (Gen9) PCI IDs to Coffee Lake ID list (Anusha) - Add missing ICL PCI ID (Jose) - Fix legacy gamma mode for ICL (Ville) - Assume eDP is present on port A when there is no VBT (Thomas) - Corrections to eDP training patterns (Jose) - Fix PSR2 selective update corruption after PSR1 setup (Jose) - Fix CRC mismatch error for DP link layer compliance (Aditya) - Fix CNL DPLL readout and clean up code (Ville) - Turn off the CUS when turning off a HDR plane (Ville) - Avoid a race with execlist tasklet during race (Chris) - Add missing CSC readout and clean up code (Ville) - Avoid unnecessary wakeref during debugfs/drop_caches/set (Chris, Caz) - Hold references to ring/HW context/context explicitly when used (Chris) - Assume next platforms inherit old platform (Rodrigo) - Use HWS indices rather than addresses for breadcrumbs (Chris) - Add REG_BIT/REG_GENMASK and REG_FIELD_PREP macros (Jani) - Convert crept in C99 types to kernel fixed size types (Jani) - Avoid passing full dev_priv in forcewake functions (Daniele) - Reset GuC on GPU reset (Sujaritha) - Rework MG and Combo PLLs to vfuncs (Lucas) - Explicitly track ppGTT size (Chris, Bob) - Coding style improvements and code modularization (Ville) - Selftest and debugging improvements (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/intel_hdmi.c From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325124925.GA12726@jlahtine-desk.ger.corp.intel.com
Diffstat (limited to 'tools/perf/scripts/python/bin/stackcollapse-record')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.46.0) at 2026-08-15 00:38:52 +0000
; Suggested-by: Andi Kleen <ak@linux.intel.com> Suggested-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Kees Cook <keescook@chromium.org> Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: alan@linux.intel.com Link: https://lkml.kernel.org/r/151727415361.33451.9049453007262764675.stgit@dwillia2-desk3.amr.corp.intel.com 2018-01-30x86: Implement array_index_mask_nospecDan Williams array_index_nospec() uses a mask to sanitize user controllable array indexes, i.e. generate a 0 mask if 'index' >= 'size', and a ~0 mask otherwise. While the default array_index_mask_nospec() handles the carry-bit from the (index - size) result in software. The x86 array_index_mask_nospec() does the same, but the carry-bit is handled in the processor CF flag without conditional instructions in the control flow. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: kernel-hardening@lists.openwall.com Cc: gregkh@linuxfoundation.org Cc: alan@linux.intel.com Link: https://lkml.kernel.org/r/151727414808.33451.1873237130672785331.stgit@dwillia2-desk3.amr.corp.intel.com 2017-11-10locking/x86: Use LOCK ADD for smp_mb() instead of MFENCEMichael S. Tsirkin MFENCE appears to be way slower than a locked instruction - let's use LOCK ADD unconditionally, as we always did on old 32-bit. Performance testing results: perf stat -r 10 -- ./virtio_ring_0_9 --sleep --host-affinity 0 --guest-affinity 0 Before: 0.922565990 seconds time elapsed ( +- 1.15% ) After: 0.578667024 seconds time elapsed ( +- 1.21% ) i.e. about ~60% faster. Just poking at SP would be the most natural, but if we then read the value from SP, we get a false dependency which will slow us down. This was noted in this article: http://shipilev.net/blog/2014/on-the-fence-with-dependencies/ And is easy to reproduce by sticking a barrier in a small non-inline function. So let's use a negative offset - which avoids this problem since we build with the red zone disabled. For userspace, use an address just below the redzone. The one difference between LOCK ADD and MFENCE is that LOCK ADD does not affect CLFLUSH, previous patches converted all uses of CLFLUSH to call mb(), such that changes to smp_mb() won't affect it. Update mb/rmb/wmb() on 32-bit to use the negative offset, too, for consistency. As a follow-up, it might be worth considering switching users of CLFLUSH to another API (e.g. clflush_mb()?) - we will then be able to convert mb() to smp_mb() again. Also arguably, GCC should switch to use LOCK ADD for __sync_synchronize(). This might be worth pursuing separately. Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: qemu-devel@nongnu.org Cc: virtualization@lists.linux-foundation.org Link: http://lkml.kernel.org/r/1509118355-4890-1-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-01-29locking/x86: Tweak the comment about use of wmb() for IOMichael S. Tsirkin On x86, we *do* still use the non-NOP rmb()/wmb() for IO barriers, but even that is generally questionable. Leave them around as historial unless somebody can point to a case where they care about the performance, but tweak the comment so people don't think they are strictly required in all cases. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization <virtualization@lists.linux-foundation.org> Link: http://lkml.kernel.org/r/1453921746-16178-4-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2016-01-29locking/x86: Drop a comment left over from X86_OOSTOREMichael S. Tsirkin The comment about wmb being non-NOP to deal with non-Intel CPUs is a left over from before the following commit: 09df7c4c8097 ("x86: Remove CONFIG_X86_OOSTORE") It makes no sense now: in particular, wmb() is not a NOP even for regular Intel CPUs because of weird use-cases e.g. dealing with WC memory. Drop this comment. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization <virtualization@lists.linux-foundation.org> Link: http://lkml.kernel.org/r/1453921746-16178-3-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2016-01-29locking/x86: Add cc clobber for ADDLMichael S. Tsirkin ADDL clobbers flags (such as CF) but barrier.h didn't tell this to GCC. Historically, GCC doesn't need one on x86, and always considers flags clobbered. We are probably missing the cc clobber in a *lot* of places for this reason. But even if not necessary, it's probably a good thing to add for documentation, and in case GCC semantcs ever change. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: virtualization <virtualization@lists.linux-foundation.org> Link: http://lkml.kernel.org/r/1453921746-16178-2-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2016-01-12x86: define __smp_xxxMichael S. Tsirkin This defines __smp_xxx barriers for x86, for use by virtualization. smp_xxx barriers are removed as they are defined correctly by asm-generic/barriers.h Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> 2016-01-12x86: reuse asm-generic/barrier.hMichael S. Tsirkin As on most architectures, on x86 read_barrier_depends and smp_read_barrier_depends are empty. Drop the local definitions and pull the generic ones from asm-generic/barrier.h instead: they are identical. This is in preparation to refactoring this code area. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> 2015-08-03Merge branch 'x86/asm' into locking/coreIngo Molnar Upcoming changes to static keys is interacting/conflicting with the following pending TSC commits in tip:x86/asm: 4ea1636b04db x86/asm/tsc: Rename native_read_tsc() to rdtsc() ... So merge it into the locking tree to have a smoother resolution. Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-08-03locking, arch: use WRITE_ONCE()/READ_ONCE() in ↵Andrey Konovalov smp_store_release()/smp_load_acquire() Replace ACCESS_ONCE() macro in smp_store_release() and smp_load_acquire() with WRITE_ONCE() and READ_ONCE() on x86, arm, arm64, ia64, metag, mips, powerpc, s390, sparc and asm-generic since ACCESS_ONCE() does not work reliably on non-scalar types. WRITE_ONCE() and READ_ONCE() were introduced in the following commits: 230fa253df63 ("kernel: Provide READ_ONCE and ASSIGN_ONCE") 43239cbe79fc ("kernel: Change ASSIGN_ONCE(val, x) to WRITE_ONCE(x, val)") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@suse.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1438528264-714-1-git-send-email-andreyknvl@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-07-06x86/asm/tsc: Remove rdtsc_barrier()Andy Lutomirski All callers have been converted to rdtsc_ordered(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/9baa4ae9a1e7c7c282f9cb2f15bb6bf5c2004032.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-05-19locking/arch: Rename set_mb() to smp_store_mb()Peter Zijlstra Since set_mb() is really about an smp_mb() -- not a IO/DMA barrier like mb() rename it to match the recent smp_load_acquire() and smp_store_release(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-05-19locking/arch: Add WRITE_ONCE() to set_mb()Peter Zijlstra Since we assume set_mb() to result in a single store followed by a full memory barrier, employ WRITE_ONCE(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-02-23x86/asm: Use alternative_2() in rdtsc_barrier()Borislav Petkov ... now that we have it. Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Borislav Petkov <bp@suse.de>