Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most interesting thing is probably the networking structs
  reorganization and a significant amount of changes is around
  self-tests.

  Core & protocols:

   - Analyze and reorganize core networking structs (socks, netdev,
     netns, mibs) to optimize cacheline consumption and set up build
     time warnings to safeguard against future header changes

     This improves TCP performances with many concurrent connections up
     to 40%

   - Add page-pool netlink-based introspection, exposing the memory
     usage and recycling stats. This helps indentify bad PP users and
     possible leaks

   - Refine TCP/DCCP source port selection to no longer favor even
     source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
     lowers the time taken by connect() for hosts having many active
     connections to the same destination

   - Refactor the TCP bind conflict code, shrinking related socket
     structs

   - Refactor TCP SYN-Cookie handling, as a preparation step to allow
     arbitrary SYN-Cookie processing via eBPF

   - Tune optmem_max for 0-copy usage, increasing the default value to
     128KB and namespecifying it

   - Allow coalescing for cloned skbs coming from page pools, improving
     RX performances with some common configurations

   - Reduce extension header parsing overhead at GRO time

   - Add bridge MDB bulk deletion support, allowing user-space to
     request the deletion of matching entries

   - Reorder nftables struct members, to keep data accessed by the
     datapath first

   - Introduce TC block ports tracking and use. This allows supporting
     multicast-like behavior at the TC layer

   - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
     classifiers (RSVP and tcindex)

   - More data-race annotations

   - Extend the diag interface to dump TCP bound-only sockets

   - Conditional notification of events for TC qdisc class and actions

   - Support for WPAN dynamic associations with nearby devices, to form
     a sub-network using a specific PAN ID

   - Implement SMCv2.1 virtual ISM device support

   - Add support for Batman-avd mulicast packet type

  BPF:

   - Tons of verifier improvements:
       - BPF register bounds logic and range support along with a large
         test suite
       - log improvements
       - complete precision tracking support for register spills
       - track aligned STACK_ZERO cases as imprecise spilled registers.
         This improves the verifier "instructions processed" metric from
         single digit to 50-60% for some programs
       - support for user's global BPF subprogram arguments with few
         commonly requested annotations for a better developer
         experience
       - support tracking of BPF_JNE which helps cases when the compiler
         transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
         like
       - several fixes

   - Add initial TX metadata implementation for AF_XDP with support in
     mlx5 and stmmac drivers. Two types of offloads are supported right
     now, that is, TX timestamp and TX checksum offload

   - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
     kernel and from kernel into BPF work with CFI enabled. This allows
     BPF to work with CONFIG_FINEIBT=y

   - Change BPF verifier logic to validate global subprograms lazily
     instead of unconditionally before the main program, so they can be
     guarded using BPF CO-RE techniques

   - Support uid/gid options when mounting bpffs

   - Add a new kfunc which acquires the associated cgroup of a task
     within a specific cgroup v1 hierarchy where the latter is
     identified by its id

   - Extend verifier to allow bpf_refcount_acquire() of a map value
     field obtained via direct load which is a use-case needed in
     sched_ext

   - Add BPF link_info support for uprobe multi link along with bpftool
     integration for the latter

   - Support for VLAN tag in XDP hints

   - Remove deprecated bpfilter kernel leftovers given the project is
     developed in user-space (https://github.com/facebook/bpfilter)

  Misc:

   - Support for parellel TC self-tests execution

   - Increase MPTCP self-tests coverage

   - Updated the bridge documentation, including several so-far
     undocumented features

   - Convert all the net self-tests to run in unique netns, to avoid
     random failures due to conflict and allow concurrent runs

   - Add TCP-AO self-tests

   - Add kunit tests for both cfg80211 and mac80211

   - Autogenerate Netlink families documentation from YAML spec

   - Add yml-gen support for fixed headers and recursive nests, the tool
     can now generate user-space code for all genetlink families for
     which we have specs

   - A bunch of additional module descriptions fixes

   - Catch incorrect freeing of pages belonging to a page pool

  Driver API:

   - Rust abstractions for network PHY drivers; do not cover yet the
     full C API, but already allow implementing functional PHY drivers
     in rust

   - Introduce queue and NAPI support in the netdev Netlink interface,
     allowing complete access to the device <> NAPIs <> queues
     relationship

   - Introduce notifications filtering for devlink to allow control
     application scale to thousands of instances

   - Improve PHY validation, requesting rate matching information for
     each ethtool link mode supported by both the PHY and host

   - Add support for ethtool symmetric-xor RSS hash

   - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
     platform

   - Expose pin fractional frequency offset value over new DPLL generic
     netlink attribute

   - Convert older drivers to platform remove callback returning void

   - Add support for PHY package MMD read/write

  New hardware / drivers:

   - Ethernet:
       - Octeon CN10K devices
       - Broadcom 5760X P7
       - Qualcomm SM8550 SoC
       - Texas Instrument DP83TG720S PHY

   - Bluetooth:
       - IMC Networks Bluetooth radio

  Removed:

   - WiFi:
       - libertas 16-bit PCMCIA support
       - Atmel at76c50x drivers
       - HostAP ISA/PCMCIA style 802.11b driver
       - zd1201 802.11b USB dongles
       - Orinoco ISA/PCMCIA 802.11b driver
       - Aviator/Raytheon driver
       - Planet WL3501 driver
       - RNDIS USB 802.11b driver

  Driver updates:

   - Ethernet high-speed NICs:
       - Intel (100G, ice, idpf):
          - allow one by one port representors creation and removal
          - add temperature and clock information reporting
          - add get/set for ethtool's header split ringparam
          - add again FW logging
          - adds support switchdev hardware packet mirroring
          - iavf: implement symmetric-xor RSS hash
          - igc: add support for concurrent physical and free-running
            timers
          - i40e: increase the allowable descriptors
       - nVidia/Mellanox:
          - Preparation for Socket-Direct multi-dev netdev. That will
            allow in future releases combining multiple PFs devices
            attached to different NUMA nodes under the same netdev
       - Broadcom (bnxt):
          - TX completion handling improvements
          - add basic ntuple filter support
          - reduce MSIX vectors usage for MQPRIO offload
          - add VXLAN support, USO offload and TX coalesce completion
            for P7
       - Marvell Octeon EP:
          - xmit-more support
          - add PF-VF mailbox support and use it for FW notifications
            for VFs
       - Wangxun (ngbe/txgbe):
          - implement ethtool functions to operate pause param, ring
            param, coalesce channel number and msglevel
       - Netronome/Corigine (nfp):
          - add flow-steering support
          - support UDP segmentation offload

   - Ethernet NICs embedded, slower, virtual:
       - Xilinx AXI: remove duplicate DMA code adopting the dma engine
         driver
       - stmmac: add support for HW-accelerated VLAN stripping
       - TI AM654x sw: add mqprio, frame preemption & coalescing
       - gve: add support for non-4k page sizes.
       - virtio-net: support dynamic coalescing moderation

   - nVidia/Mellanox Ethernet datacenter switches:
       - allow firmware upgrade without a reboot
       - more flexible support for bridge flooding via the compressed
         FID flooding mode

   - Ethernet embedded switches:
       - Microchip:
          - fine-tune flow control and speed configurations in KSZ8xxx
          - KSZ88X3: enable setting rmii reference
       - Renesas:
          - add jumbo frames support
       - Marvell:
          - 88E6xxx: add "eth-mac" and "rmon" stats support

   - Ethernet PHYs:
       - aquantia: add firmware load support
       - at803x: refactor the driver to simplify adding support for more
         chip variants
       - NXP C45 TJA11xx: Add MACsec offload support

   - Wifi:
       - MediaTek (mt76):
          - NVMEM EEPROM improvements
          - mt7996 Extremely High Throughput (EHT) improvements
          - mt7996 Wireless Ethernet Dispatcher (WED) support
          - mt7996 36-bit DMA support
       - Qualcomm (ath12k):
          - support for a single MSI vector
          - WCN7850: support AP mode
       - Intel (iwlwifi):
          - new debugfs file fw_dbg_clear
          - allow concurrent P2P operation on DFS channels

   - Bluetooth:
       - QCA2066: support HFP offload
       - ISO: more broadcast-related improvements
       - NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
  lan78xx: remove redundant statement in lan78xx_get_eee
  lan743x: remove redundant statement in lan743x_ethtool_get_eee
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
  bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
  tcp: Revert no longer abort SYN_SENT when receiving some ICMP
  Revert "mlx5 updates 2023-12-20"
  Revert "net: stmmac: Enable Per DMA Channel interrupt"
  ipvlan: Remove usage of the deprecated ida_simple_xx() API
  ipvlan: Fix a typo in a comment
  net/sched: Remove ipt action tests
  net: stmmac: Use interrupt mode INTM=1 for per channel irq
  net: stmmac: Add support for TX/RX channel interrupt
  net: stmmac: Make MSI interrupt routine generic
  dt-bindings: net: snps,dwmac: per channel irq
  net: phy: at803x: make read_status more generic
  net: phy: at803x: add support for cdt cross short test for qca808x
  net: phy: at803x: refactor qca808x cable test get status function
  net: phy: at803x: generalize cdt fault length function
  net: ethernet: cortina: Drop TSO support
  ...

1 files changed, 69 insertions, 20 deletions

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 689028257fcc..325e0778e937 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -95,6 +95,7 @@ struct kernel_ethtool_ringparam {
  * @ETHTOOL_RING_USE_TX_PUSH: capture for setting tx_push
  * @ETHTOOL_RING_USE_RX_PUSH: capture for setting rx_push
  * @ETHTOOL_RING_USE_TX_PUSH_BUF_LEN: capture for setting tx_push_buf_len
+ * @ETHTOOL_RING_USE_TCP_DATA_SPLIT: capture for setting tcp_data_split
  */
 enum ethtool_supported_ring_param {
 	ETHTOOL_RING_USE_RX_BUF_LEN		= BIT(0),
@@ -102,6 +103,7 @@ enum ethtool_supported_ring_param {
 	ETHTOOL_RING_USE_TX_PUSH		= BIT(2),
 	ETHTOOL_RING_USE_RX_PUSH		= BIT(3),
 	ETHTOOL_RING_USE_TX_PUSH_BUF_LEN	= BIT(4),
+	ETHTOOL_RING_USE_TCP_DATA_SPLIT		= BIT(5),
 };
 
 #define __ETH_RSS_HASH_BIT(bit)	((u32)1 << (bit))
@@ -409,8 +411,10 @@ struct ethtool_pause_stats {
  *	not entire FEC data blocks. This is a non-standard statistic.
  *	Reported to user space as %ETHTOOL_A_FEC_STAT_CORR_BITS.
  *
- * @lane: per-lane/PCS-instance counts as defined by the standard
- * @total: error counts for the entire port, for drivers incapable of reporting
+ * For each of the above fields, the two substructure members are:
+ *
+ * - @lanes: per-lane/PCS-instance counts as defined by the standard
+ * - @total: error counts for the entire port, for drivers incapable of reporting
  *	per-lane stats
  *
  * Drivers should fill in either only total or per-lane statistics, core
@@ -595,9 +599,46 @@ struct ethtool_mm_stats {
 };
 
 /**
+ * struct ethtool_rxfh_param - RXFH (RSS) parameters
+ * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
+ *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @indir_size: On SET, the array size of the user buffer for the
+ *	indirection table, which may be zero, or
+ *	%ETH_RXFH_INDIR_NO_CHANGE.  On GET (read from the driver),
+ *	the array size of the hardware indirection table.
+ * @indir: The indirection table of size @indir_size entries.
+ * @key_size: On SET, the array size of the user buffer for the hash key,
+ *	which may be zero.  On GET (read from the driver), the size of the
+ *	hardware hash key.
+ * @key: The hash key of size @key_size bytes.
+ * @rss_context: RSS context identifier.  Context 0 is the default for normal
+ *	traffic; other contexts can be referenced as the destination for RX flow
+ *	classification rules.  On SET, %ETH_RXFH_CONTEXT_ALLOC is used
+ *	to allocate a new RSS context; on return this field will
+ *	contain the ID of the newly allocated context.
+ * @rss_delete: Set to non-ZERO to remove the @rss_context context.
+ * @input_xfrm: Defines how the input data is transformed. Valid values are one
+ *	of %RXH_XFRM_*.
+ */
+struct ethtool_rxfh_param {
+	u8	hfunc;
+	u32	indir_size;
+	u32	*indir;
+	u32	key_size;
+	u8	*key;
+	u32	rss_context;
+	u8	rss_delete;
+	u8	input_xfrm;
+};
+
+/**
  * struct ethtool_ops - optional netdev operations
  * @cap_link_lanes_supported: indicates if the driver supports lanes
  *	parameter.
+ * @cap_rss_ctx_supported: indicates if the driver supports RSS
+ *	contexts.
+ * @cap_rss_sym_xor_supported: indicates if the driver supports symmetric-xor
+ *	RSS.
  * @supported_coalesce_params: supported types of interrupt coalescing.
  * @supported_ring_params: supported ring params.
  * @get_drvinfo: Report driver/device information. Modern drivers no
@@ -694,15 +735,6 @@ struct ethtool_mm_stats {
  *	will remain unchanged.
  *	Returns a negative error code or zero. An error code must be returned
  *	if at least one unsupported change was requested.
- * @get_rxfh_context: Get the contents of the RX flow hash indirection table,
- *	hash key, and/or hash function assiciated to the given rss context.
- *	Returns a negative error code or zero.
- * @set_rxfh_context: Create, remove and configure RSS contexts. Allows setting
- *	the contents of the RX flow hash indirection table, hash key, and/or
- *	hash function associated to the given context. Arguments which are set
- *	to %NULL or zero will remain unchanged.
- *	Returns a negative error code or zero. An error code must be returned
- *	if at least one unsupported change was requested.
  * @get_channels: Get number of channels.
  * @set_channels: Set number of channels.  Returns a negative error code or
  *	zero.
@@ -785,6 +817,8 @@ struct ethtool_mm_stats {
  */
 struct ethtool_ops {
 	u32     cap_link_lanes_supported:1;
+	u32     cap_rss_ctx_supported:1;
+	u32	cap_rss_sym_xor_supported:1;
 	u32	supported_coalesce_params;
 	u32	supported_ring_params;
 	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
@@ -844,15 +878,9 @@ struct ethtool_ops {
 	int	(*reset)(struct net_device *, u32 *);
 	u32	(*get_rxfh_key_size)(struct net_device *);
 	u32	(*get_rxfh_indir_size)(struct net_device *);
-	int	(*get_rxfh)(struct net_device *, u32 *indir, u8 *key,
-			    u8 *hfunc);
-	int	(*set_rxfh)(struct net_device *, const u32 *indir,
-			    const u8 *key, const u8 hfunc);
-	int	(*get_rxfh_context)(struct net_device *, u32 *indir, u8 *key,
-				    u8 *hfunc, u32 rss_context);
-	int	(*set_rxfh_context)(struct net_device *, const u32 *indir,
-				    const u8 *key, const u8 hfunc,
-				    u32 *rss_context, bool delete);
+	int	(*get_rxfh)(struct net_device *, struct ethtool_rxfh_param *);
+	int	(*set_rxfh)(struct net_device *, struct ethtool_rxfh_param *,
+			    struct netlink_ext_ack *extack);
 	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
 	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
 	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
@@ -1044,6 +1072,14 @@ static inline int ethtool_mm_frag_size_min_to_add(u32 val_min, u32 *val_add,
 }
 
 /**
+ * ethtool_get_ts_info_by_layer - Obtains time stamping capabilities from the MAC or PHY layer.
+ * @dev: pointer to net_device structure
+ * @info: buffer to hold the result
+ * Returns zero on success, non-zero otherwise.
+ */
+int ethtool_get_ts_info_by_layer(struct net_device *dev, struct ethtool_ts_info *info);
+
+/**
  * ethtool_sprintf - Write formatted string to ethtool string data
  * @data: Pointer to a pointer to the start of string to update
  * @fmt: Format of string to write
@@ -1053,6 +1089,19 @@ static inline int ethtool_mm_frag_size_min_to_add(u32 val_min, u32 *val_add,
  */
 extern __printf(2, 3) void ethtool_sprintf(u8 **data, const char *fmt, ...);
 
+/**
+ * ethtool_puts - Write string to ethtool string data
+ * @data: Pointer to a pointer to the start of string to update
+ * @str: String to write
+ *
+ * Write string to *data without a trailing newline. Update *data
+ * to point at start of next string.
+ *
+ * Prefer this function to ethtool_sprintf() when given only
+ * two arguments or if @fmt is just "%s".
+ */
+extern void ethtool_puts(u8 **data, const char *str);
+
 /* Link mode to forced speed capabilities maps */
 struct ethtool_forced_speed_map {
 	u32		speed;