| Age | Commit message (Collapse) | Author |
|---|
|
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new parameter to complement the existing 'netmask' option. The
main difference between netmask and bitmask is that bitmask takes any
arbitrary ip address as input, it does not have to be a valid netmask.
The name of the new parameter is 'bitmask'. This lets us mask out
arbitrary bits in the ip address, for example:
ipset create set1 hash:ip bitmask 255.128.255.0
ipset create set2 hash:ip,port family inet6 bitmask ffff::ff80
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
It makes possible to reproduce exactly the same set after a save/restore.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The parameter defines the upper limit in any hash bucket at adding new entries
from userspace - if the limit would be exceeded, ipset doubles the hash size
and rehashes. It means the set may consume more memory but gives faster
evaluation at matching in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The inline function-specifier should not be used for static functions
defined in .c files since it bloats the kernel. Instead leave the
compiler to decide which functions to inline.
While a couple of the files affected (ip_set_*_gen.h) are technically
headers, they contain templates for generating the common parts of
particular set-types and so we treat them like .c files.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Resolve conflict between d2912cb15bdd ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 500") removing the GPL disclaimer
and fe03d4745675 ("Update my email address") which updates Jozsef
Kadlecsik's email.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's better to use my kadlec@netfilter.org email address in
the source code. I might not be able to use
kadlec@blackhole.kfki.hu in the future.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Wrong comparison prevented the hash types to add a range with more than
2^31 addresses but reported as a success.
Fixes Netfilter's bugzilla id #1005, reported by Oleg Serditov and
Oliver Ford.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Before this patch struct htype created at the first source
of ip_set_hash_gen.h and it is common for both IPv4 and IPv6
set variants.
Make struct htype per ipset family and use NLEN to make
nets array fixed size to simplify struct htype allocation.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Three types of data need to be protected in the case of the hash types:
a. The hash buckets: standard rcu pointer operations are used.
b. The element blobs in the hash buckets are stored in an array and
a bitmap is used for book-keeping to tell which elements in the array
are used or free.
c. Networks per cidr values and the cidr values themselves are stored
in fix sized arrays and need no protection. The values are modified
in such an order that in the worst case an element testing is repeated
once with the same cidr value.
The ipset hash approach uses arrays instead of lists and therefore is
incompatible with rhashtable.
Performance is tested by Jesper Dangaard Brouer:
Simple drop in FORWARD
~~~~~~~~~~~~~~~~~~~~~~
Dropping via simple iptables net-mask match::
iptables -t raw -N simple || iptables -t raw -F simple
iptables -t raw -I simple -s 198.18.0.0/15 -j DROP
iptables -t raw -D PREROUTING -j simple
iptables -t raw -I PREROUTING -j simple
Drop performance in "raw": 11.3Mpps
Generator: sending 12.2Mpps (tx:12264083 pps)
Drop via original ipset in RAW table
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Create a set with lots of elements::
sudo ./ipset destroy test
echo "create test hash:ip hashsize 65536" > test.set
for x in `seq 0 255`; do
for y in `seq 0 255`; do
echo "add test 198.18.$x.$y" >> test.set
done
done
sudo ./ipset restore < test.set
Dropping via ipset::
iptables -t raw -F
iptables -t raw -N net198 || iptables -t raw -F net198
iptables -t raw -I net198 -m set --match-set test src -j DROP
iptables -t raw -I PREROUTING -j net198
Drop performance in "raw" with ipset: 8Mpps
Perf report numbers ipset drop in "raw"::
+ 24.65% ksoftirqd/1 [ip_set] [k] ip_set_test
- 21.42% ksoftirqd/1 [kernel.kallsyms] [k] _raw_read_lock_bh
- _raw_read_lock_bh
+ 99.88% ip_set_test
- 19.42% ksoftirqd/1 [kernel.kallsyms] [k] _raw_read_unlock_bh
- _raw_read_unlock_bh
+ 99.72% ip_set_test
+ 4.31% ksoftirqd/1 [ip_set_hash_ip] [k] hash_ip4_kadt
+ 2.27% ksoftirqd/1 [ixgbe] [k] ixgbe_fetch_rx_buffer
+ 2.18% ksoftirqd/1 [ip_tables] [k] ipt_do_table
+ 1.81% ksoftirqd/1 [ip_set_hash_ip] [k] hash_ip4_test
+ 1.61% ksoftirqd/1 [kernel.kallsyms] [k] __netif_receive_skb_core
+ 1.44% ksoftirqd/1 [kernel.kallsyms] [k] build_skb
+ 1.42% ksoftirqd/1 [kernel.kallsyms] [k] ip_rcv
+ 1.36% ksoftirqd/1 [kernel.kallsyms] [k] __local_bh_enable_ip
+ 1.16% ksoftirqd/1 [kernel.kallsyms] [k] dev_gro_receive
+ 1.09% ksoftirqd/1 [kernel.kallsyms] [k] __rcu_read_unlock
+ 0.96% ksoftirqd/1 [ixgbe] [k] ixgbe_clean_rx_irq
+ 0.95% ksoftirqd/1 [kernel.kallsyms] [k] __netdev_alloc_frag
+ 0.88% ksoftirqd/1 [kernel.kallsyms] [k] kmem_cache_alloc
+ 0.87% ksoftirqd/1 [xt_set] [k] set_match_v3
+ 0.85% ksoftirqd/1 [kernel.kallsyms] [k] inet_gro_receive
+ 0.83% ksoftirqd/1 [kernel.kallsyms] [k] nf_iterate
+ 0.76% ksoftirqd/1 [kernel.kallsyms] [k] put_compound_page
+ 0.75% ksoftirqd/1 [kernel.kallsyms] [k] __rcu_read_lock
Drop via ipset in RAW table with RCU-locking
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
With RCU locking, the RW-lock is gone.
Drop performance in "raw" with ipset with RCU-locking: 11.3Mpps
Performance-tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Even if we return with generic IPSET_ERR_PROTOCOL it is good idea
to return line number if we called in batch mode.
Moreover we are not always exiting with IPSET_ERR_PROTOCOL. For
example hash:ip,port,net may return IPSET_ERR_HASH_RANGE_UNSUPPORTED
or IPSET_ERR_INVALID_CIDR.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Permit userspace to supply CIDR length equal to the host address CIDR
length in netlink message. Prohibit any other CIDR length for IPv6
variant of the set.
Also return -IPSET_ERR_HASH_RANGE_UNSUPPORTED instead of generic
-IPSET_ERR_PROTOCOL in IPv6 variant of hash:ip,port,net when
IPSET_ATTR_IP_TO attribute is given.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Make all extensions attributes checks within ip_set_get_extensions()
and reduce number of duplicated code.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Check if mandatory MTYPE, HTYPE and HOST_MASK macros
defined.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
HKEY_DATALEN remains defined after first inclusion
of ip_set_hash_gen.h, so it is incorrectly reused
for IPv6 code.
Undefine HKEY_DATALEN in ip_set_hash_gen.h at the end.
Also remove some useless defines of HKEY_DATALEN in
ip_set_hash_{ip{,mark,port},netiface}.c as ip_set_hash_gen.h
defines it correctly for such set types anyway.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Ensure userspace supplies string not longer than
IPSET_MAX_COMMENT_SIZE.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We do not need to check tb[IPSET_ATTR_PORT] != NULL before
retrieving port, as this attribute is known to exist due to
ip_set_attr_netorder() returning true only when attribute
exists and it is in network byte order.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Statement ret = func1() || func2() returns 0 when both func1()
and func2() return 0, or 1 if func1() or func2() returns non-zero.
However in our case func1() and func2() returns error code on
failure, so it seems good to propagate such error codes, rather
than returning 1 in case of failure.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* Undefine mtype_data_reset_elem before defining.
* Remove duplicated mtype_gc_init undefine, move
mtype_gc_init define closer to mtype_gc define.
* Use htype instead of HTYPE in IPSET_TOKEN(HTYPE, _create)().
* Remove PF definition from sets: no more used.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
