/*
 * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
 *
 * This copyrighted material is made available to anyone wishing to use,
 * modify, copy, or redistribute it subject to the terms and conditions
 * of the GNU General Public License v.2.
 */

#ifndef _UAPI__DLM_PLOCK_DOT_H__
#define _UAPI__DLM_PLOCK_DOT_H__

#include <linux/types.h>

#define DLM_PLOCK_MISC_NAME		"dlm_plock"

#define DLM_PLOCK_VERSION_MAJOR	1
#define DLM_PLOCK_VERSION_MINOR	2
#define DLM_PLOCK_VERSION_PATCH	0

enum {
	DLM_PLOCK_OP_LOCK = 1,
	DLM_PLOCK_OP_UNLOCK,
	DLM_PLOCK_OP_GET,
};

#define DLM_PLOCK_FL_CLOSE 1

struct dlm_plock_info {
	__u32 version[3];
	__u8 optype;
	__u8 ex;
	__u8 wait;
	__u8 flags;
	__u32 pid;
	__s32 nodeid;
	__s32 rv;
	__u32 fsid;
	__u64 number;
	__u64 start;
	__u64 end;
	__u64 owner;
};


#endif /* _UAPI__DLM_PLOCK_DOT_H__ */
you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Reviewed-by: Allison Randal &lt;allison@lohutok.net&gt;
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>ARM: OMAP: serial: Rename DRIVER_NAME</title>
<updated>2016-02-07T07:13:30Z</updated>
<author>
<name>Jean Delvare</name>
<email>jdelvare@suse.de</email>
</author>
<published>2016-01-21T08:46:12Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=1349ba02bf72caafa36a2d6878cdba340d65b2ac'/>
<id>urn:sha1:1349ba02bf72caafa36a2d6878cdba340d65b2ac</id>
<content type='text'>
DRIVER_NAME is too generic to be used in a driver-specific platform
data file. Use a name specific to the driver instead, to avoid
collisions.

Signed-off-by: Jean Delvare &lt;jdelvare@suse.de&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
Cc: Jiri Slaby &lt;jslaby@suse.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>ARM: OMAP: serial: remove last vestige of DTR_gpio support.</title>
<updated>2014-11-10T17:06:44Z</updated>
<author>
<name>NeilBrown</name>
<email>neilb@suse.de</email>
</author>
<published>2014-11-07T23:42:46Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=7aff221c5dbe4f88930a64531df2236f303e1851'/>
<id>urn:sha1:7aff221c5dbe4f88930a64531df2236f303e1851</id>
<content type='text'>
These fields were added by:
commit 9574f36fb801035f6ab0fbb1b53ce2c12c17d100
    OMAP/serial: Add support for driving a GPIO as DTR.

but not removed by

commit 985bfd54c826c0ba873ca0adfd5589263e0c6ee2
    tty: serial: omap: remove some dead code

which reverted most of that commit.
Time to revert the rest.

Signed-off-by: NeilBrown &lt;neilb@suse.de&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
</entry>
<entry>
<title>SERIAL: OMAP: Remove the slave idle handling from the driver</title>
<updated>2013-05-19T22:37:08Z</updated>
<author>
<name>Santosh Shilimkar</name>
<email>santosh.shilimkar@ti.com</email>
</author>
<published>2013-05-15T14:48:41Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=7f18d05a1af75142d4856a91ffd2f1d8eb553c12'/>
<id>urn:sha1:7f18d05a1af75142d4856a91ffd2f1d8eb553c12</id>
<content type='text'>
UART IP slave idle handling now taken care by runtime pm backend(hwmod layer)
so remove the hackery from the driver.

As discussed on the list, in future if dma mode needs to be brought
back to this driver, UART sysc handling needs to be updated in
framework such a way that no-idle/force idle profile can be supported.
Given the broken dma mode for OMAP uarts, its very unlikely.

Acked-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Tested-by: Vaibhav Bedia &lt;vaibhav.bedia@ti.com&gt;
Tested-by: Sourav Poddar &lt;sourav.poddar@ti.com&gt;
Signed-off-by: Rajendra nayak &lt;rnayak@ti.com&gt;
Signed-off-by: Santosh Shilimkar &lt;santosh.shilimkar@ti.com&gt;
Reviewed-by: Kevin Hilman &lt;khilman@linaro.org&gt;
Tested-by: Kevin Hilman &lt;khilman@linaro.org&gt;  # OMAP4/Panda
Signed-off-by: Paul Walmsley &lt;paul@pwsan.com&gt;
</content>
</entry>
<entry>
<title>ARM: OMAP: Move plat/omap-serial.h to include/linux/platform_data/serial-omap.h</title>
<updated>2012-12-14T22:50:09Z</updated>
<author>
<name>Tony Lindgren</name>
<email>tony@atomide.com</email>
</author>
<published>2012-12-14T17:09:11Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=d9ba573718666df2e7e30d671f81bba39d07f91c'/>
<id>urn:sha1:d9ba573718666df2e7e30d671f81bba39d07f91c</id>
<content type='text'>
We need to move this file to allow ARM multiplatform configurations
to build for omap2+. This can now be done as this file now only
contains platform_data.

cc: Russell King &lt;linux@arm.linux.org.uk&gt;
cc: Alan Cox &lt;alan@linux.intel.com&gt;
cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
cc: Govindraj.R &lt;govindraj.raja@ti.com&gt;
cc: Kevin Hilman &lt;khilman@ti.com&gt;
cc: linux-serial@vger.kernel.org
Reviewed-by: Felipe Balbi &lt;balbi@ti.com&gt;
Signed-off-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
</entry>