#ifndef _ASM_M32R_ASSEMBLER_H
#define _ASM_M32R_ASSEMBLER_H

/*
 * linux/asm-m32r/assembler.h
 *
 * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
 *
 * This file contains M32R architecture specific macro definitions.
 */


#ifndef __STR
#ifdef __ASSEMBLY__
#define __STR(x) x
#else
#define __STR(x) #x
#endif
#endif /* __STR */

#ifdef CONFIG_SMP
#define M32R_LOCK	__STR(lock)
#define M32R_UNLOCK	__STR(unlock)
#else
#define M32R_LOCK	__STR(ld)
#define M32R_UNLOCK	__STR(st)
#endif

#ifdef __ASSEMBLY__
#undef ENTRY
#define ENTRY(name) ENTRY_M name
	.macro  ENTRY_M name
	.global \name
	ALIGN
\name:
	.endm
#endif


/**
 * LDIMM - load immediate value
 * STI - enable interruption
 * CLI - disable interruption
 */

#ifdef __ASSEMBLY__

#define LDIMM(reg,x) LDIMM reg x
	.macro LDIMM reg x
	seth	\reg, #high(\x)
	or3	\reg, \reg, #low(\x)
	.endm

#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
	.macro ENABLE_INTERRUPTS reg
	setpsw  #0x40	    ->	nop
	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
	.endm

#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
	.macro DISABLE_INTERRUPTS reg
	clrpsw  #0x40	    ->	nop
	; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
	.endm
#else	/* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
	.macro ENABLE_INTERRUPTS reg
	mvfc	\reg, psw
	or3	\reg, \reg, #0x0040
	mvtc	\reg, psw
	.endm

#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
	.macro DISABLE_INTERRUPTS reg
	mvfc	\reg, psw
	and3	\reg, \reg, #0xffbf
	mvtc	\reg, psw
	.endm
#endif	/* CONFIG_CHIP_M32102 */

	.macro	SAVE_ALL
	push	r0		; orig_r0
	push	sp		; spi (r15)
	push	lr		; r14
	push	r13
	mvfc	r13, cr3	; spu
	push	r13
	mvfc	r13, bbpc
	push	r13
	mvfc	r13, bbpsw
	push	r13
	mvfc	r13, bpc
	push	r13
	mvfc	r13, psw
	push	r13
#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
	mvfaclo	r13, a1
	push	r13
	mvfachi r13, a1
	push	r13
	mvfaclo	r13, a0
	push	r13
	mvfachi	r13, a0
	push	r13
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
	mvfaclo	r13
	push	r13
	mvfachi	r13
	push	r13
	ldi	r13, #0
	push	r13		; dummy push acc1h
	push	r13		; dummy push acc1l
#else
#error unknown isa configuration
#endif
	ldi	r13, #-1
	push	r13		; syscall_nr (default: -1)
	push	r12
	push	r11
	push	r10
	push	r9
	push	r8
	push	r7
	push	r3
	push	r2
	push	r1
	push	r0
	addi	sp, #-4		; room for implicit pt_regs parameter
	push	r6
	push	r5
	push	r4
	.endm

	.macro	RESTORE_ALL
	pop	r4
	pop	r5
	pop	r6
	addi	sp, #4
	pop	r0
	pop	r1
	pop	r2
	pop	r3
	pop	r7
	pop	r8
	pop	r9
	pop	r10
	pop	r11
	pop	r12
	addi	r15, #4		; Skip syscall number
#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
	pop	r13
	mvtachi	r13, a0
	pop	r13
	mvtaclo	r13, a0
	pop	r13
	mvtachi	r13, a1
	pop	r13
	mvtaclo	r13, a1
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
	pop	r13		; dummy pop acc1h
	pop	r13		; dummy pop acc1l
	pop	r13
	mvtachi	r13
	pop	r13
	mvtaclo	r13
#else
#error unknown isa configuration
#endif
	pop	r14
	mvtc	r14, psw
	pop	r14
	mvtc	r14, bpc
	addi	sp, #8		; Skip bbpsw, bbpc
	pop	r14
	mvtc	r14, cr3	; spu
	pop	r13
	pop	lr		; r14
	pop	sp		; spi (r15)
	addi	sp, #4		; Skip orig_r0
	.fillinsn
1:	rte
	.section .fixup,"ax"
2:	bl	do_exit
	.previous
	.section __ex_table,"a"
	ALIGN
	.long	1b, 2b
	.previous
	.endm

#define GET_CURRENT(reg)  get_current reg
	.macro get_current reg
	ldi  \reg, #-8192
	and  \reg, sp
	.endm

#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
	.macro	SWITCH_TO_KERNEL_STACK
	; switch to kernel stack (spi)
	clrpsw	#0x80	    ->	nop
	.endm
#else	/* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
	.macro	SWITCH_TO_KERNEL_STACK
	push	r0		; save r0 for working
	mvfc	r0, psw
	and3	r0, r0, #0x00ff7f
	mvtc	r0, psw
	slli	r0, #16
	bltz	r0, 1f		; check BSM-bit
;
	;; called from kernel context: previous stack = spi
	pop	r0		; retrieve r0
	bra	2f
	.fillinsn
1:
	;; called from user context: previous stack = spu
	mvfc	r0, cr3		; spu
	addi	r0, #4
	mvtc	r0, cr3		; spu
	ld	r0, @(-4,r0)	; retrieve r0
	.fillinsn
2:
	.endm
#endif	/* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */

#endif	/* __ASSEMBLY__ */

#endif	/* _ASM_M32R_ASSEMBLER_H */
9.y</option>
<option value='linux-4.2.y'>linux-4.2.y</option>
<option value='linux-4.20.y'>linux-4.20.y</option>
<option value='linux-4.3.y'>linux-4.3.y</option>
<option value='linux-4.4.y'>linux-4.4.y</option>
<option value='linux-4.5.y'>linux-4.5.y</option>
<option value='linux-4.6.y'>linux-4.6.y</option>
<option value='linux-4.7.y'>linux-4.7.y</option>
<option value='linux-4.8.y'>linux-4.8.y</option>
<option value='linux-4.9.y'>linux-4.9.y</option>
<option value='linux-5.0.y'>linux-5.0.y</option>
<option value='linux-5.1.y'>linux-5.1.y</option>
<option value='linux-5.10.y'>linux-5.10.y</option>
<option value='linux-5.11.y'>linux-5.11.y</option>
<option value='linux-5.12.y'>linux-5.12.y</option>
<option value='linux-5.13.y'>linux-5.13.y</option>
<option value='linux-5.14.y'>linux-5.14.y</option>
<option value='linux-5.15.y'>linux-5.15.y</option>
<option value='linux-5.16.y'>linux-5.16.y</option>
<option value='linux-5.17.y'>linux-5.17.y</option>
<option value='linux-5.18.y'>linux-5.18.y</option>
<option value='linux-5.19.y'>linux-5.19.y</option>
<option value='linux-5.2.y'>linux-5.2.y</option>
<option value='linux-5.3.y'>linux-5.3.y</option>
<option value='linux-5.4.y'>linux-5.4.y</option>
<option value='linux-5.5.y'>linux-5.5.y</option>
<option value='linux-5.6.y'>linux-5.6.y</option>
<option value='linux-5.7.y'>linux-5.7.y</option>
<option value='linux-5.8.y'>linux-5.8.y</option>
<option value='linux-5.9.y'>linux-5.9.y</option>
<option value='linux-6.0.y'>linux-6.0.y</option>
<option value='linux-6.1.y'>linux-6.1.y</option>
<option value='linux-6.10.y'>linux-6.10.y</option>
<option value='linux-6.11.y'>linux-6.11.y</option>
<option value='linux-6.12.y'>linux-6.12.y</option>
<option value='linux-6.13.y'>linux-6.13.y</option>
<option value='linux-6.14.y'>linux-6.14.y</option>
<option value='linux-6.15.y'>linux-6.15.y</option>
<option value='linux-6.16.y'>linux-6.16.y</option>
<option value='linux-6.17.y'>linux-6.17.y</option>
<option value='linux-6.18.y'>linux-6.18.y</option>
<option value='linux-6.19.y'>linux-6.19.y</option>
<option value='linux-6.2.y'>linux-6.2.y</option>
<option value='linux-6.3.y'>linux-6.3.y</option>
<option value='linux-6.4.y'>linux-6.4.y</option>
<option value='linux-6.5.y'>linux-6.5.y</option>
<option value='linux-6.6.y' selected='selected'>linux-6.6.y</option>
<option value='linux-6.7.y'>linux-6.7.y</option>
<option value='linux-6.8.y'>linux-6.8.y</option>
<option value='linux-6.9.y'>linux-6.9.y</option>
<option value='linux-rolling-lts'>linux-rolling-lts</option>
<option value='linux-rolling-stable'>linux-rolling-stable</option>
<option value='master'>master</option>
</select> <input type='submit' value='switch'/></form></td></tr>
<tr><td class='sub'>Hosts the 0x221E linux distro kernel.</td><td class='sub right'>Ubuntu</td></tr></table>
<table class='tabs'><tr><td>
<a href='/distro/kernel/?h=linux-6.6.y'>summary</a><a href='/distro/kernel/refs/?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'>refs</a><a class='active' href='/distro/kernel/log/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;showmsg=1'>log</a><a href='/distro/kernel/tree/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'>tree</a><a href='/distro/kernel/commit/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'>commit</a><a href='/distro/kernel/diff/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'>diff</a></td><td class='form'><form class='right' method='get' action='/distro/kernel/log/arch/arm/mach-imx/ehci-imx25.c'>
<input type='hidden' name='h' value='linux-6.6.y'/><input type='hidden' name='id' value='32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'/><input type='hidden' name='showmsg' value='1'/><select name='qt'>
<option value='grep'>log msg</option>
<option value='author'>author</option>
<option value='committer'>committer</option>
<option value='range'>range</option>
</select>
<input class='txt' type='search' size='10' name='q' value=''/>
<input type='submit' value='search'/>
</form>
</td></tr></table>
<div class='path'>path: <a href='/distro/kernel/log/?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48&amp;showmsg=1'>root</a>/<a href='/distro/kernel/log/arch?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48&amp;showmsg=1'>arch</a>/<a href='/distro/kernel/log/arch/arm?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48&amp;showmsg=1'>arm</a>/<a href='/distro/kernel/log/arch/arm/mach-imx?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48&amp;showmsg=1'>mach-imx</a>/<a href='/distro/kernel/log/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48&amp;showmsg=1'>ehci-imx25.c</a></div><div class='content'><table class='list nowrap'><tr class='nohover'><th class='left'>Age</th><th class='left'>Commit message (<a href='/distro/kernel/log/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=32ed53b83ea5ec26a4dba90e18f5e0ff6c71eb48'>Collapse</a>)</th><th class='left'>Author</th></tr>
<tr class='logheader'><td><span title='2011-02-11 08:34:17 +0100'>2011-02-11</span></td><td class='logsubject'><a href='/distro/kernel/commit/arch/arm/mach-imx/ehci-imx25.c?h=linux-6.6.y&amp;id=cb07625d1f84fb48e6849cb530762ffcc6f8e458'>ARM i.MX ehci: factor out soc specific functions</a></td><td>Sascha Hauer</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Currently we have a mxc_initialize_usb_hw which is called on every
i.MX SoC. This function dispatches the different SoC types, which
is quite ugly. This patch moves the SoC specific USB initialization
to their correspondive mach directories.

Signed-off-by: Sascha Hauer &lt;s.hauer@pengutronix.de&gt;


</td></tr>