| Age | Commit message (Collapse) | Author |
|---|
|
Entities access various piece of information from the subdev state when
configuring a partition. The same data is available through the
partition structure passed to the .configure_partition() operation. Use
it to avoid accessing the state, which will simplify moving to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The DRM pipelines don't partition frames, as the hardware operates
synchronously with the display. The entity operations access
configuration data from the entity state in that case, instead of
accessing the partition structure. This requires special cases in
entity-specific code, increasing the driver complexity.
To prepare for simplifying the code, initialize a single partition for
the DRM pipelines, similarly to how video pipelines create one partition
spanning the full image when partitioning isn't needed. The partition is
allocated statically in the vsp1_drm_pipeline structure instead of
dynamically as for video pipelines, as DRM pipelines are guaranteed to
operate on a single partition.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
Some of the code that handles pipeline configuration assumes that
entities in a pipeline's entities list are sorted from sink to source.
To prepare for using that code with the DRM pipeline, insert the BRx
just before the WPF, and the RPFs at the head of the list.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
It is useful for debugging purpose to dump a vsp1_pipeline to the kernel
log. Add a new function to do so, and use it when initializing the video
and DRM pipelines.
As __vsp1_pipeline_dump() needs to construct the log message
iteratively, it uses pr_cont(...) (exact equivalent to the more verbose
"printk(KERN_CONT ..."). The function thus can't use dev_dbg() to log
the initial part of the message, for two reasons:
- pr_cont() doesn't seem to work with dev_*(). Even if the format string
passed to dev_*() doesn't end with a '\n', pr_cont() starts a new line
in the log. This behaviour doesn't seem to be clearly documented, and
may or may not be on purpose.
- Messages printed by dev_dbg() may be omitted if dynamic debugging is
enabled. In that case, the continuation messages will still be
printed, leading to confusing log messages.
To still benefit from the dynamic debug infrastructure, we declare a
vsp1_pipeline_dump() macro that uses _dynamic_func_call() when dynamic
debugging is enabled. The whole vsp1_pipeline_dump() call can be
selected at runtime. The __vsp1_pipeline_dump() function then uses a
plain "printk(KERN_DEBUG ...)" to print the message header using the
debug log level, and pr_cont() to print the rest of the message on the
same line.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_partition_window structure is used to store the horizontal size
of a partition window. This is all that is currently needed, as all
partitions span the whole image vertically. The horizontal window size
is retrieved in the .configure_partition() handler from the
vsp1_partition_window structure, and the vertical window size from the
subdev state.
Accessing the subdev state in the .configure_partition() handler is
problematic in the context of moving to the V4L2 subdev active state
API, as .configure_partition() is called in non-interruptable context,
and the state lock can't be taken. To avoid this, start by storing the
vertical size in the window, replacing the custom vsp1_partition_window
structure with a v4l2_rect. Retrieving the vertical size from the window
in .configure_partition() will be done in a subsequent change.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The entity .configure_partition() function operates on a partition, and
has to retrieve that partition from the pipeline's current partition
field. Pass the partition pointer to the function to make it clearer
what partition it operates on, and remove the vsp1_pipeline.partition
field.
This change clearly shows that the DRM pipeline doesn't use partitions,
which makes entity implementation more complex and error-prone. This
will be addressed in a further cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_partition structure stores the RPF partition configuration in a
single field for all RPF instances, while each RPF can have its own
configuration. Fix it by storing the configuration separately for each
RPF instance.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Fixes: ab45e8585182 ("media: v4l: vsp1: Allow entities to participate in the partition algorithm")
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
When calculation a partition in vsp1_pipeline_calculate_partition(),
there is no need to handle the case where the whole image is covered by
a single partition locally. In that case, the index and div_size
parameters are 0 and format->width respectively, which makes the general
code behave exactly as the special case. Drop the special case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The partition calculation code, located in vsp1_video.c, is not specific
to video pipelines. To prepare for its usage in DRM pipelines, move it
to vsp1_pipe.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The histogram module is the only one that has a custom .get_fmt()
handler, to handle the special case of the output format being fixed.
This can equally well be handled in the .set_fmt() handler instead.
Beside avoiding special cases and using the same .get_fmt() handler in
all modules, it ensures that the correct format is stored in the active
state for the source pad, including when .set_fmt() is called from
vsp1_entity_init_state(). Both are needed to later switch to the V4L2
subdev active state API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The brx_get_compose() function is just a wrapper around
v4l2_subdev_state_get_compose() without any added value. Drop it and
call v4l2_subdev_state_get_compose() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_rwpf_get_crop() function is just a wrapper around
v4l2_subdev_state_get_crop() without any added value. Drop it and call
v4l2_subdev_state_get_crop() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_entity_get_pad_selection() function is just a wrapper around
v4l2_subdev_state_get_crop() or v4l2_subdev_state_get_compose() without
any added value. Drop it and call the functions it wraps directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
The vsp1_entity_get_pad_format() function is just a wrapper around
v4l2_subdev_state_get_format() without any added value. Drop it and call
v4l2_subdev_state_get_format() directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
|
|
When formats don't match between a subdev and a connected video device,
starting streaming returns an error without giving the user any
indication as to what went wrong. To help debugging pipeline
misconfigurations, add a debug message that indicates the cause of the
failure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
|
|
The histogram support mixes _irqsave and _irq, causing the following
smatch warning:
drivers/media/platform/renesas/vsp1/vsp1_histo.c:153 histo_stop_streaming()
warn: mixing irqsave and irq
The histo_stop_streaming() calls spin_lock_irqsave() followed by
wait_event_lock_irq(). The former hints that interrupts may be disabled
by the caller, while the latter reenables interrupts unconditionally.
This doesn't cause any real bug, as the function is always called with
interrupts enabled, but the pattern is still incorrect.
Fix the problem by using spin_lock_irq() instead of spin_lock_irqsave()
in histo_stop_streaming(). While at it, switch to spin_lock_irq() and
spin_lock() as appropriate elsewhere.
Fixes: 99362e32332b ("[media] v4l: vsp1: Add histogram support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-renesas-soc/164d74ff-312c-468f-be64-afa7182cd2f4@moroto.mountain/
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix
remaining incorrect references to pad config in function and variable
names.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Linux 6.7-rc4
This is needed for a vsp1 fix that upcoming media patches depend on.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Switch all drivers accessing sub-device state to use the stream-aware
functions. We will soon remove the old ones.
This patch has been generated using the following Coccinelle script:
---------8<------------
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_pad_format(E1, E2, E3)
+ v4l2_subdev_state_get_format(E2, E3)
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_pad_crop(E1, E2, E3)
+ v4l2_subdev_state_get_crop(E2, E3)
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_pad_compose(E1, E2, E3)
+ v4l2_subdev_state_get_compose(E2, E3)
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_try_format(E1, E2, E3)
+ v4l2_subdev_state_get_format(E2, E3)
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_try_crop(E1, E2, E3)
+ v4l2_subdev_state_get_crop(E2, E3)
@@
expression E1, E2, E3;
@@
- v4l2_subdev_get_try_compose(E1, E2, E3)
+ v4l2_subdev_state_get_compose(E2, E3)
---------8<------------
Additionally drivers/media/i2c/s5k5baf.c and
drivers/media/platform/samsung/s3c-camif/camif-capture.c have been
manually changed as Coccinelle didn't. Further local variables have been
removed as they became unused as a result of the other changes.
Also Coccinelle introduced indentation by space in files
drivers/media/i2c/st-mipid02.c and
drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c. This has been also
corrected.
The diff from Coccinelle-generated changes are:
> diff --git b/drivers/media/i2c/imx319.c a/drivers/media/i2c/imx319.c
> index e549692ff478..420984382173 100644
> --- b/drivers/media/i2c/imx319.c
> +++ a/drivers/media/i2c/imx319.c
> @@ -2001,7 +2001,6 @@ static int imx319_do_get_pad_format(struct imx319 *imx319,
> struct v4l2_subdev_format *fmt)
> {
> struct v4l2_mbus_framefmt *framefmt;
> - struct v4l2_subdev *sd = &imx319->sd;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/imx355.c a/drivers/media/i2c/imx355.c
> index 96bdde685d65..e1b1d2fc79dd 100644
> --- b/drivers/media/i2c/imx355.c
> +++ a/drivers/media/i2c/imx355.c
> @@ -1299,7 +1299,6 @@ static int imx355_do_get_pad_format(struct imx355 *imx355,
> struct v4l2_subdev_format *fmt)
> {
> struct v4l2_mbus_framefmt *framefmt;
> - struct v4l2_subdev *sd = &imx355->sd;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov08x40.c a/drivers/media/i2c/ov08x40.c
> index ca799bbcfdb7..abbb0b774d43 100644
> --- b/drivers/media/i2c/ov08x40.c
> +++ a/drivers/media/i2c/ov08x40.c
> @@ -2774,7 +2774,6 @@ static int ov08x40_do_get_pad_format(struct ov08x40 *ov08x,
> struct v4l2_subdev_format *fmt)
> {
> struct v4l2_mbus_framefmt *framefmt;
> - struct v4l2_subdev *sd = &ov08x->sd;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov13858.c a/drivers/media/i2c/ov13858.c
> index 7816d9787c61..09387e335d80 100644
> --- b/drivers/media/i2c/ov13858.c
> +++ a/drivers/media/i2c/ov13858.c
> @@ -1316,7 +1316,6 @@ static int ov13858_do_get_pad_format(struct ov13858 *ov13858,
> struct v4l2_subdev_format *fmt)
> {
> struct v4l2_mbus_framefmt *framefmt;
> - struct v4l2_subdev *sd = &ov13858->sd;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/ov13b10.c a/drivers/media/i2c/ov13b10.c
> index 268cd4b03f9c..c06411d5ee2b 100644
> --- b/drivers/media/i2c/ov13b10.c
> +++ a/drivers/media/i2c/ov13b10.c
> @@ -1001,7 +1001,6 @@ static int ov13b10_do_get_pad_format(struct ov13b10 *ov13b,
> struct v4l2_subdev_format *fmt)
> {
> struct v4l2_mbus_framefmt *framefmt;
> - struct v4l2_subdev *sd = &ov13b->sd;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> framefmt = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> diff --git b/drivers/media/i2c/s5c73m3/s5c73m3-core.c a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> index 47605e36bc60..8f9b5713daf7 100644
> --- b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> +++ a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
> @@ -819,7 +819,6 @@ static void s5c73m3_oif_try_format(struct s5c73m3 *state,
> struct v4l2_subdev_format *fmt,
> const struct s5c73m3_frame_size **fs)
> {
> - struct v4l2_subdev *sd = &state->sensor_sd;
> u32 code;
>
> switch (fmt->pad) {
> diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
> index 67da2045f543..03ccfb0e1e11 100644
> --- a/drivers/media/i2c/s5k5baf.c
> +++ b/drivers/media/i2c/s5k5baf.c
> @@ -1472,14 +1472,11 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
>
> if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
> rects = (struct v4l2_rect * []) {
> - &s5k5baf_cis_rect,
> - v4l2_subdev_get_try_crop(sd, sd_state,
> - PAD_CIS),
> - v4l2_subdev_get_try_compose(sd, sd_state,
> - PAD_CIS),
> - v4l2_subdev_get_try_crop(sd, sd_state,
> - PAD_OUT)
> - };
> + &s5k5baf_cis_rect,
> + v4l2_subdev_state_get_crop(sd_state, PAD_CIS),
> + v4l2_subdev_state_get_compose(sd_state, PAD_CIS),
> + v4l2_subdev_state_get_crop(sd_state, PAD_OUT)
> + };
> s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
> return 0;
> }
> diff --git b/drivers/media/platform/samsung/s3c-camif/camif-capture.c a/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> index 295e083f38e8..be58260ea67e 100644
> --- b/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> +++ a/drivers/media/platform/samsung/s3c-camif/camif-capture.c
> @@ -1216,7 +1216,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
> struct v4l2_mbus_framefmt *mf = &fmt->format;
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> fmt->format = *mf;
> return 0;
> }
> @@ -1305,7 +1305,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
> __camif_subdev_try_format(camif, mf, fmt->pad);
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> - mf = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> + mf = v4l2_subdev_state_get_format(sd_state, fmt->pad);
> *mf = fmt->format;
> mutex_unlock(&camif->lock);
> return 0;
> diff --git b/drivers/media/platform/ti/cal/cal-camerarx.c a/drivers/media/platform/ti/cal/cal-camerarx.c
> index cea454ed9c20..61433744c6c4 100644
> --- b/drivers/media/platform/ti/cal/cal-camerarx.c
> +++ a/drivers/media/platform/ti/cal/cal-camerarx.c
> @@ -621,8 +621,6 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *state,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - struct cal_camerarx *phy = to_cal_camerarx(sd);
> -
> /* No transcoding, source and sink codes must match. */
> if (cal_rx_pad_is_source(code->pad)) {
> struct v4l2_mbus_framefmt *fmt;
> diff --git b/drivers/staging/media/imx/imx-ic-prp.c a/drivers/staging/media/imx/imx-ic-prp.c
> index dd558fac6477..61d69f19657e 100644
> --- b/drivers/staging/media/imx/imx-ic-prp.c
> +++ a/drivers/staging/media/imx/imx-ic-prp.c
> @@ -82,8 +82,6 @@ static struct v4l2_mbus_framefmt *
> __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state,
> unsigned int pad, enum v4l2_subdev_format_whence which)
> {
> - struct imx_ic_priv *ic_priv = priv->ic_priv;
> -
> if (which == V4L2_SUBDEV_FORMAT_TRY)
> return v4l2_subdev_state_get_format(sd_state, pad);
> else
> diff --git b/drivers/staging/media/imx/imx-ic-prpencvf.c a/drivers/staging/media/imx/imx-ic-prpencvf.c
> index 02db7dbb884b..ec73c901079e 100644
> --- b/drivers/staging/media/imx/imx-ic-prpencvf.c
> +++ a/drivers/staging/media/imx/imx-ic-prpencvf.c
> @@ -790,8 +790,6 @@ static struct v4l2_mbus_framefmt *
> __prp_get_fmt(struct prp_priv *priv, struct v4l2_subdev_state *sd_state,
> unsigned int pad, enum v4l2_subdev_format_whence which)
> {
> - struct imx_ic_priv *ic_priv = priv->ic_priv;
> -
> if (which == V4L2_SUBDEV_FORMAT_TRY)
> return v4l2_subdev_state_get_format(sd_state, pad);
> else
> diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
> index 9c9361354c00..b08a249b5fdd 100644
> --- a/drivers/media/i2c/st-mipid02.c
> +++ b/drivers/media/i2c/st-mipid02.c
> @@ -751,7 +751,7 @@ static void mipid02_set_fmt_source(struct v4l2_subdev *sd,
> format->format = bridge->fmt;
> else
> format->format = *v4l2_subdev_state_get_format(sd_state,
> - MIPID02_SINK_0);
> + MIPID02_SINK_0);
>
> /* but code may need to be converted */
> format->format.code = serial_to_parallel_code(format->format.code);
> diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> index 117912d3bfbd..96353648c032 100644
> --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
> @@ -319,7 +319,7 @@ static void rkisp1_isp_start(struct rkisp1_isp *isp,
> rkisp1_write(rkisp1, RKISP1_CIF_ISP_CTRL, val);
>
> src_fmt = v4l2_subdev_state_get_format(sd_state,
> - RKISP1_ISP_PAD_SOURCE_VIDEO);
> + RKISP1_ISP_PAD_SOURCE_VIDEO);
> src_info = rkisp1_mbus_info_get_by_code(src_fmt->code);
>
> if (src_info->pixel_enc != V4L2_PIXEL_ENC_BAYER)
> @@ -475,9 +475,9 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp,
> sink_fmt = v4l2_subdev_state_get_format(sd_state,
> RKISP1_ISP_PAD_SINK_VIDEO);
> src_fmt = v4l2_subdev_state_get_format(sd_state,
> - RKISP1_ISP_PAD_SOURCE_VIDEO);
> + RKISP1_ISP_PAD_SOURCE_VIDEO);
> src_crop = v4l2_subdev_state_get_crop(sd_state,
> - RKISP1_ISP_PAD_SOURCE_VIDEO);
> + RKISP1_ISP_PAD_SOURCE_VIDEO);
>
> /*
> * Media bus code. The ISP can operate in pass-through mode (Bayer in,
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VSP1 driver uses the subdev .s_stream() operation to stop WPF
instances, without a corresponding call to start them. The V4L2 subdev
core started warning about unbalanced .s_stream() calls in commit
009905ec5043 ("media: v4l2-subdev: Document and enforce .s_stream()
requirements"), causing a regression with this driver.
Fix the problem by replacing the .s_stream() operation with an explicit
function call for WPF instances. This allows sharing an additional data
structure between RPF and WPF instances.
Fixes: 009905ec5043 ("media: v4l2-subdev: Document and enforce .s_stream() requirements")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/linux-media/2221395-6a9b-9527-d697-e76aebc6af@linux-m68k.org/
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Structures passed to subdev pad operations are all zero-initialized when
declaring variables. In most cases, this is done with designated
initializers to initialize some of the fields to specific values, but in
a minority of cases the structures are zero-initialized by assigning
them to '{ 0 }' or '{ }'.
Improve coding style consistency by using designated initializers where
possible, always initializing the 'which' field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Structures passed to subdev pad operations are all zero-initialized, but
not always with the same kind of code constructs. While most drivers
used designated initializers, which zero all the fields that are not
specified, when declaring variables, some use memset(). Those two
methods lead to the same end result, and, depending on compiler
optimizations, may even be completely equivalent, but they're not
consistent.
Improve coding style consistency by using designated initializers
instead of calling memset(). Where applicable, also move the variables
to inner scopes of for loops to ensure correct initialization in all
iterations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Several drivers call subdev pad operations, passing structures that are
not fully zeroed. While the drivers initialize the fields they care
about explicitly, this results in reserved fields having uninitialized
values. Future kernel API changes that make use of those fields thus
risk breaking proper driver operation in ways that could be hard to
detect.
To avoid this, make the code more robust by zero-initializing all the
structures passed to subdev pad operation. Maintain a consistent coding
style by preferring designated initializers (which zero-initialize all
the fields that are not specified) over memset() where possible, and
make variable declarations local to inner scopes where applicable. One
notable exception to this rule is in the ipu3 driver, where a memset()
is needed as the structure is not a local variable but a function
parameter provided by the caller.
Not all fields of those structures can be initialized when declaring the
variables, as the values for those fields are computed later in the
code. Initialize the 'which' field in all cases, and other fields when
the variable declaration is so close to the v4l2_subdev_call() call that
it keeps all the context easily visible when reading the code, to avoid
hindering readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # For vimc
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> # For am437x
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # For drivers/staging/media/imx/
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Print underrun interrupts with ratelimited print.
Note that we don't enable the underrun interrupt. If we have underruns,
we don't want to get flooded with interrupts about them. It's enough to
see that an underrun happened at the end of a frame.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue()
handler to check if the .start_streaming() operation has been called,
and decide whether to just add the buffer to an internal queue, or also
trigger a hardware run. vb2_is_streaming() relies on the vb2_queue
structure's streaming field, which used to be set only after calling the
.start_streaming() operation.
Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
changed this, setting the .streaming field in vb2_core_streamon() before
enqueuing buffers to the driver and calling .start_streaming(). This
broke the vsp1 driver which now believes that .start_streaming() has
been called when it hasn't, leading to a crash:
[ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 881.067495] Mem abort info:
[ 881.070290] ESR = 0x0000000096000006
[ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits
[ 881.079358] SET = 0, FnV = 0
[ 881.082414] EA = 0, S1PTW = 0
[ 881.085558] FSC = 0x06: level 2 translation fault
[ 881.090439] Data abort info:
[ 881.093320] ISV = 0, ISS = 0x00000006
[ 881.097157] CM = 0, WnR = 0
[ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000
[ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000
[ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem
[ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556
[ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0
[ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0
[ 881.162206] sp : ffff80000c267710
[ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98
[ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8
[ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020
[ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000
[ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d
[ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000
[ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001
[ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020
[ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000
[ 881.237092] Call trace:
[ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0
[ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0
[ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0
[ 881.253076] __enqueue_in_driver+0xbc/0x260
[ 881.257269] vb2_start_streaming+0x48/0x200
[ 881.261461] vb2_core_streamon+0x13c/0x280
[ 881.265565] vb2_streamon+0x3c/0x90
[ 881.269064] vsp1_video_streamon+0x2fc/0x3e0
[ 881.273344] v4l_streamon+0x50/0x70
[ 881.276844] __video_do_ioctl+0x2bc/0x5d0
[ 881.280861] video_usercopy+0x2a8/0xc80
[ 881.284704] video_ioctl2+0x20/0x40
[ 881.288201] v4l2_ioctl+0xa4/0xc0
[ 881.291525] __arm64_sys_ioctl+0xe8/0x110
[ 881.295543] invoke_syscall+0x68/0x190
[ 881.299303] el0_svc_common.constprop.0+0x88/0x170
[ 881.304105] do_el0_svc+0x4c/0xf0
[ 881.307430] el0_svc+0x4c/0xa0
[ 881.310494] el0t_64_sync_handler+0xbc/0x140
[ 881.314773] el0t_64_sync+0x190/0x194
[ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60)
[ 881.324551] ---[ end trace 0000000000000000 ]---
[ 881.329173] note: yavta[1271] exited with preempt_count 1
A different regression report sent to the linux-media mailing list ([1])
was answered with a claim that the vb2_is_streaming() function has never
been meant for this purpose. The document of the function, as well as of
the struct vb2_queue streaming field, is sparse, so this claim may be
hard to verify.
The information needed by the vsp1 driver to decide how to process
queued buffers is also available from the vb2_start_streaming_called()
function. Use it instead of vb2_is_streaming() to fix the problem.
[1] https://lore.kernel.org/linux-media/545610e7-3446-2b82-60dc-7385fea3774f@redhat.com/
Fixes: a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
vsp1_subdev_internal_ops has been removed since commit 0efdf0f5eaaf
("[media] v4l: vsp1: Implement and use the subdev pad::init_cfg
configuration"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add new pixel formats: RGBX1010102, RGBA1010102, ARGB2101010, Y210 and
Y212.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add VI6_IP_VERSION_SOC_V4H so that we can identify V4H SoC.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
V3U is actually gen4, not gen3. The same IP is also used in the
(not-yet-supported) V4H.
Change VI6_IP_VERSION_MODEL_VSPD_V3U to VI6_IP_VERSION_MODEL_VSPD_GEN4,
to represent the model correctly. V3U and V4H can still be
differentiated, if needed, with the VI6_IP_VERSION_SOC_xxx.
Also mark VI6_IP_VERSION_MODEL_VSPD_GEN4 as gen 4 in vsp1_device_info,
and update the code to correctly match for gen 4.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Mediatek MDP V3
- New driver for NXP i.MX DW100 dewarper
- Zoran driver got promoted from staging
- Hantro and related drivers got promoted from staging
- Several VB1 drivers got moved to staging/deprecated (cpia2, fsl-viu,
meye, saa7146, av7110, stkwebcam, tm6000, vpfe_capture, davinci,
zr364xx)
- Usual set of driver fixes, improvements and cleanups
* tag 'media/v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (107 commits)
media: destage Hantro VPU driver
media: platform: mtk-mdp3: add MediaTek MDP3 driver
media: dt-binding: mediatek: add bindings for MediaTek CCORR and WDMA
media: dt-binding: mediatek: add bindings for MediaTek MDP3 components
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
media: xilinx: video: Add 1X12 greyscale format
media: xilinx: csi2rxss: Add 1X12 greyscale format
media: staging: media: imx: imx7-media-csi: Increase video mem limit
media: uvcvideo: Limit power line control for Sonix Technology
media: uvcvideo: Use entity get_cur in uvc_ctrl_set
media: uvcvideo: Fix typo 'the the' in comment
media: uvcvideo: Use indexed loops in uvc_ctrl_init_ctrl()
media: uvcvideo: Fix memory leak in uvc_gpio_parse
media: renesas: vsp1: Add support for RZ/G2L VSPD
media: renesas: vsp1: Add VSP1_HAS_NON_ZERO_LBA feature bit
media: renesas: vsp1: Add support for VSP software version
media: renesas: vsp1: Add support to deassert/assert reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/G2L VSPD bindings
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: amphion: fix a bug that vpu core may not resume after suspend
...
|
|
Convert the media drivers to use video device based pipeline start/stop
where possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
To support DRM blend mode in R-Car DU driver, we must be able to pass
a plane with the premultiplied alpha. Adding a new property to
vsp1_du_atomic_config allows the R-Car DU driver to pass the
premultiplied alpha plane.
Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The RZ/G2L VSPD provides a single VSPD instance. It has the following
sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF.
The VSPD block on RZ/G2L SoCs does not have a version register, so
added a new compatible string "renesas,r9a07g044-vsp2" with a data
pointer containing the info structure. Also the reset line is shared
with the DU module.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As per HW manual V3M and RZ/G2L SoCs has nonzero LIF buffer
attributes. So, introduce a feature bit for handling the same.
This patch also adds separate device info structure for V3M and V3H
SoCs, as both these SoCs share the same model ID, but V3H does not
have VSP1_HAS_NON_ZERO_LBA feature bit.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The VSPD block on RZ/G2L SoCs does not have a version register.
This patch adds support for adding VSP software version based on
device match.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As the resets DT property is mandatory, and is present in all .dtsi
in mainline, add support to perform deassert/assert using reference
counted reset handle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The term 'videobuf' typically refers to the old videobuf version 1
framework. Avoid using this word in drivers that are converted to
vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
media_pad_remote_pad_first()
The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The vertical subsampling factor is currently not considered in the
offset calculation for plane cropping done in rpf_configure_partition.
This causes a distortion (shift of the color plane) when formats with
the vsub factor larger than 1 are used (e.g. NV12, see
vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor
for all planes except plane 0 (luminance).
Drop generalization of the offset calculation to reduce the binary size.
Fixes: e5ad37b64de9 ("[media] v4l: vsp1: Add cropping support")
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the new vb2_queue_is_busy() helper to replace the open-coded
version.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the vb2_fop_release() helper to replace the open-coded version. The
video->lock is assigned to the queue lock, used by vb2_fop_release(), so
the only functional difference is that v4l2_fh_release() is now called
before vsp1_device_put(). This should be harmless.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The V4L2 subdevs have managed without centralized locking for the state
(previously pad_config), as the try-state is supposedly safe (although I
believe two TRY ioctls for the same fd would race), and the
active-state, and its locking, is managed by the drivers internally.
We now have active-state in a centralized position, and need locking.
Strictly speaking the locking is only needed for new drivers that use
the new state, as the current drivers continue behaving as they used to.
However, active-state locking is complicated by the fact that currently
the real active-state of a subdev is split into multiple parts: the new
v4l2_subdev_state, subdev control state, and subdev's internal state.
In the future all these three states should be combined into one state
(the v4l2_subdev_state), and then a single lock for the state should be
sufficient.
But to solve the current split-state situation we need to share locks
between the three states. This is accomplished by using the same lock
management as the control handler does: we use a pointer to a mutex,
allowing the driver to override the default mutex. Thus the driver can
do e.g.:
sd->state_lock = sd->ctrl_handler->lock;
before calling v4l2_subdev_init_finalize(), resulting in sharing the
same lock between the states and the controls.
The locking model for active-state is such that any subdev op that gets
the state as a parameter expects the state to be already locked by the
caller, and expects the caller to release the lock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
v4l2_subdev_alloc_state() and v4l2_subdev_free_state() are not supposed
to be used by the drivers. However, we do have a few drivers that use
those at the moment, so we need to expose these functions for the time
being.
Prefix the functions with __ to mark the functions as internal.
At the same time, rename them to v4l2_subdev_state_alloc and
v4l2_subdev_state_free to match the style used for other functions like
video_device_alloc() and media_request_alloc().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The bus_info field is set by most drivers based on the type of the device
bus as well as the name of the device. Do this in v4l_querycap() so
drivers don't need to. This keeps compatibility with non-default and silly
bus_info.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set bus_info field based on struct device in media_device_init() and
remove corresponding code from drivers.
Also update media_device_init() documentation: the dev field must be now
initialised before calling it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to cleanup the main platform media directory, move Renesas
driver to its own directory.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
