From e8858fc07eb8386b9b6436d3e86eeb4b81e4f660 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 13 Jul 2024 23:00:27 -0700 Subject: Input: msc5000_ts - remove the driver MCS-5000 belongs to the 1st generation of Melfas chips, manufactured in 2000-2007. The driver relies on custom platform data (no DT support) and there never were any users of this driver in the mainline kernel. The commit adding the driver mentioned that the driver was tested on S3C6410 NCP board (with Samsung S3C6410 SoC) but the touchscreen device was never added to the board file. This board was removed in v6.3 in commit 743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support"). Remove the driver since there are no users. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240714060029.1528662-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/mcs.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h index fcc6f2a1f5c3..f3b0749f1630 100644 --- a/include/linux/platform_data/mcs.h +++ b/include/linux/platform_data/mcs.h @@ -16,10 +16,6 @@ struct mcs_platform_data { void (*poweron)(bool); void (*cfg_pin)(void); - /* touchscreen */ - unsigned int x_size; - unsigned int y_size; - /* touchkey */ const u32 *keymap; unsigned int keymap_size; -- cgit v1.2.3 From dd29eadee1e8f07bbec57dddf4befbcd3e3c0af7 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sat, 13 Jul 2024 23:00:28 -0700 Subject: Input: msc_touchkey - remove the driver MCS-5000/5080 chips belong to the 1st generation of Melfas chips, manufactured in 2000-2007. The driver relies on custom platform data (no DT support) and there never were any users of this driver in the mainline kernel. It is likely that the driver was (like mcs5000_ts driver) was tested on S3C6410 NCP board (with Samsung S3C6410 SoC), but the touchkey device was never added to the board file. This board was removed in v6.3 in commit 743c8fbb90ca ("ARM: s3c: remove most s3c64xx board support"). Remove the driver since there are no users. Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240714060029.1528662-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 12 -- drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/mcs_touchkey.c | 268 ---------------------------------- include/linux/platform_data/mcs.h | 26 ---- 4 files changed, 307 deletions(-) delete mode 100644 drivers/input/keyboard/mcs_touchkey.c delete mode 100644 include/linux/platform_data/mcs.h (limited to 'include/linux/platform_data') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 1d0c5f4c0f99..72f9552cb571 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -421,18 +421,6 @@ config KEYBOARD_MAX7359 To compile this driver as a module, choose M here: the module will be called max7359_keypad. -config KEYBOARD_MCS - tristate "MELFAS MCS Touchkey" - depends on I2C - help - Say Y here if you have the MELFAS MCS5000/5080 touchkey controller - chip in your system. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called mcs_touchkey. - config KEYBOARD_MPR121 tristate "Freescale MPR121 Touchkey" depends on I2C diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index aecef00c5d09..b8d12a0524e0 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -41,7 +41,6 @@ obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o -obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c deleted file mode 100644 index 2410f676c7f9..000000000000 --- a/drivers/input/keyboard/mcs_touchkey.c +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Touchkey driver for MELFAS MCS5000/5080 controller - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: HeungJun Kim - * Author: Joonyoung Shim - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* MCS5000 Touchkey */ -#define MCS5000_TOUCHKEY_STATUS 0x04 -#define MCS5000_TOUCHKEY_STATUS_PRESS 7 -#define MCS5000_TOUCHKEY_FW 0x0a -#define MCS5000_TOUCHKEY_BASE_VAL 0x61 - -/* MCS5080 Touchkey */ -#define MCS5080_TOUCHKEY_STATUS 0x00 -#define MCS5080_TOUCHKEY_STATUS_PRESS 3 -#define MCS5080_TOUCHKEY_FW 0x01 -#define MCS5080_TOUCHKEY_BASE_VAL 0x1 - -enum mcs_touchkey_type { - MCS5000_TOUCHKEY, - MCS5080_TOUCHKEY, -}; - -struct mcs_touchkey_chip { - unsigned int status_reg; - unsigned int pressbit; - unsigned int press_invert; - unsigned int baseval; -}; - -struct mcs_touchkey_data { - void (*poweron)(bool); - - struct i2c_client *client; - struct input_dev *input_dev; - struct mcs_touchkey_chip chip; - unsigned int key_code; - unsigned int key_val; - unsigned short keycodes[]; -}; - -static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) -{ - struct mcs_touchkey_data *data = dev_id; - struct mcs_touchkey_chip *chip = &data->chip; - struct i2c_client *client = data->client; - struct input_dev *input = data->input_dev; - unsigned int key_val; - unsigned int pressed; - int val; - - val = i2c_smbus_read_byte_data(client, chip->status_reg); - if (val < 0) { - dev_err(&client->dev, "i2c read error [%d]\n", val); - goto out; - } - - pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; - if (chip->press_invert) - pressed ^= chip->press_invert; - - /* key_val is 0 when released, so we should use key_val of press. */ - if (pressed) { - key_val = val & (0xff >> (8 - chip->pressbit)); - if (!key_val) - goto out; - key_val -= chip->baseval; - data->key_code = data->keycodes[key_val]; - data->key_val = key_val; - } - - input_event(input, EV_MSC, MSC_SCAN, data->key_val); - input_report_key(input, data->key_code, pressed); - input_sync(input); - - dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, - pressed ? "pressed" : "released"); - - out: - return IRQ_HANDLED; -} - -static void mcs_touchkey_poweroff(void *data) -{ - struct mcs_touchkey_data *touchkey = data; - - touchkey->poweron(false); -} - -static int mcs_touchkey_probe(struct i2c_client *client) -{ - const struct i2c_device_id *id = i2c_client_get_device_id(client); - const struct mcs_platform_data *pdata; - struct mcs_touchkey_data *data; - struct input_dev *input_dev; - unsigned int fw_reg; - int fw_ver; - int error; - int i; - - pdata = dev_get_platdata(&client->dev); - if (!pdata) { - dev_err(&client->dev, "no platform data defined\n"); - return -EINVAL; - } - - data = devm_kzalloc(&client->dev, - struct_size(data, keycodes, pdata->key_maxval + 1), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - input_dev = devm_input_allocate_device(&client->dev); - if (!input_dev) { - dev_err(&client->dev, "Failed to allocate input device\n"); - return -ENOMEM; - } - - data->client = client; - data->input_dev = input_dev; - - if (id->driver_data == MCS5000_TOUCHKEY) { - data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; - data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; - data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; - fw_reg = MCS5000_TOUCHKEY_FW; - } else { - data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; - data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; - data->chip.press_invert = 1; - data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; - fw_reg = MCS5080_TOUCHKEY_FW; - } - - fw_ver = i2c_smbus_read_byte_data(client, fw_reg); - if (fw_ver < 0) { - dev_err(&client->dev, "i2c read error[%d]\n", fw_ver); - return fw_ver; - } - dev_info(&client->dev, "Firmware version: %d\n", fw_ver); - - input_dev->name = "MELFAS MCS Touchkey"; - input_dev->id.bustype = BUS_I2C; - input_dev->evbit[0] = BIT_MASK(EV_KEY); - if (!pdata->no_autorepeat) - input_dev->evbit[0] |= BIT_MASK(EV_REP); - input_dev->keycode = data->keycodes; - input_dev->keycodesize = sizeof(data->keycodes[0]); - input_dev->keycodemax = pdata->key_maxval + 1; - - for (i = 0; i < pdata->keymap_size; i++) { - unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); - unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); - - data->keycodes[val] = code; - __set_bit(code, input_dev->keybit); - } - - input_set_capability(input_dev, EV_MSC, MSC_SCAN); - input_set_drvdata(input_dev, data); - - if (pdata->cfg_pin) - pdata->cfg_pin(); - - if (pdata->poweron) { - data->poweron = pdata->poweron; - data->poweron(true); - - error = devm_add_action_or_reset(&client->dev, - mcs_touchkey_poweroff, data); - if (error) - return error; - } - - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, mcs_touchkey_interrupt, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - client->dev.driver->name, data); - if (error) { - dev_err(&client->dev, "Failed to register interrupt\n"); - return error; - } - - error = input_register_device(input_dev); - if (error) - return error; - - i2c_set_clientdata(client, data); - return 0; -} - -static void mcs_touchkey_shutdown(struct i2c_client *client) -{ - struct mcs_touchkey_data *data = i2c_get_clientdata(client); - - if (data->poweron) - data->poweron(false); -} - -static int mcs_touchkey_suspend(struct device *dev) -{ - struct mcs_touchkey_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - - /* Disable the work */ - disable_irq(client->irq); - - /* Finally turn off the power */ - if (data->poweron) - data->poweron(false); - - return 0; -} - -static int mcs_touchkey_resume(struct device *dev) -{ - struct mcs_touchkey_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - - /* Enable the device first */ - if (data->poweron) - data->poweron(true); - - /* Enable irq again */ - enable_irq(client->irq); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, - mcs_touchkey_suspend, mcs_touchkey_resume); - -static const struct i2c_device_id mcs_touchkey_id[] = { - { "mcs5000_touchkey", MCS5000_TOUCHKEY }, - { "mcs5080_touchkey", MCS5080_TOUCHKEY }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); - -static struct i2c_driver mcs_touchkey_driver = { - .driver = { - .name = "mcs_touchkey", - .pm = pm_sleep_ptr(&mcs_touchkey_pm_ops), - }, - .probe = mcs_touchkey_probe, - .shutdown = mcs_touchkey_shutdown, - .id_table = mcs_touchkey_id, -}; - -module_i2c_driver(mcs_touchkey_driver); - -/* Module information */ -MODULE_AUTHOR("Joonyoung Shim "); -MODULE_AUTHOR("HeungJun Kim "); -MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/mcs.h b/include/linux/platform_data/mcs.h deleted file mode 100644 index f3b0749f1630..000000000000 --- a/include/linux/platform_data/mcs.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 - 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim - * Author: HeungJun Kim - */ - -#ifndef __LINUX_MCS_H -#define __LINUX_MCS_H - -#define MCS_KEY_MAP(v, c) ((((v) & 0xff) << 16) | ((c) & 0xffff)) -#define MCS_KEY_VAL(v) (((v) >> 16) & 0xff) -#define MCS_KEY_CODE(v) ((v) & 0xffff) - -struct mcs_platform_data { - void (*poweron)(bool); - void (*cfg_pin)(void); - - /* touchkey */ - const u32 *keymap; - unsigned int keymap_size; - unsigned int key_maxval; - bool no_autorepeat; -}; - -#endif /* __LINUX_MCS_H */ -- cgit v1.2.3 From f81489a136ac2c18a7b9bb22cf37c0a6f6d58545 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 12 Jul 2024 13:57:13 -0700 Subject: hwmon: (max6697) Drop platform data support Platform data is not used anywhere in the upstram kernel. Drop support for it to simplify code maintenance. Reviewed-by: Tzung-Bi Shih Signed-off-by: Guenter Roeck --- drivers/hwmon/max6697.c | 176 ++++++++++++++++------------------ include/linux/platform_data/max6697.h | 33 ------- 2 files changed, 82 insertions(+), 127 deletions(-) delete mode 100644 include/linux/platform_data/max6697.h (limited to 'include/linux/platform_data') diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c index 9a2a21230c7d..b9766533d876 100644 --- a/drivers/hwmon/max6697.c +++ b/drivers/hwmon/max6697.c @@ -17,8 +17,6 @@ #include #include -#include - enum chips { max6581, max6602, max6622, max6636, max6689, max6693, max6694, max6697, max6698, max6699 }; @@ -558,54 +556,97 @@ static const struct attribute_group max6697_group = { }; __ATTRIBUTE_GROUPS(max6697); -static void max6697_get_config_of(struct device_node *node, - struct max6697_platform_data *pdata) +static int max6697_config_of(struct max6697_data *data, struct i2c_client *client) { - int len; - const __be32 *prop; - - pdata->smbus_timeout_disable = - of_property_read_bool(node, "smbus-timeout-disable"); - pdata->extended_range_enable = - of_property_read_bool(node, "extended-range-enable"); - pdata->beta_compensation = - of_property_read_bool(node, "beta-compensation-enable"); - - prop = of_get_property(node, "alert-mask", &len); - if (prop && len == sizeof(u32)) - pdata->alert_mask = be32_to_cpu(prop[0]); - prop = of_get_property(node, "over-temperature-mask", &len); - if (prop && len == sizeof(u32)) - pdata->over_temperature_mask = be32_to_cpu(prop[0]); - prop = of_get_property(node, "resistance-cancellation", &len); - if (prop) { - if (len == sizeof(u32)) - pdata->resistance_cancellation = be32_to_cpu(prop[0]); - else - pdata->resistance_cancellation = 0xfe; + const struct max6697_chip_data *chip = data->chip; + struct device_node *node = client->dev.of_node; + int ret, confreg; + int factor = 0; + u32 vals[2]; + + confreg = 0; + if (of_property_read_bool(node, "smbus-timeout-disable") && + (chip->valid_conf & MAX6697_CONF_TIMEOUT)) { + confreg |= MAX6697_CONF_TIMEOUT; + } + if (of_property_read_bool(node, "extended-range-enable") && + (chip->valid_conf & MAX6581_CONF_EXTENDED)) { + confreg |= MAX6581_CONF_EXTENDED; + data->temp_offset = 64; + } + if (of_property_read_bool(node, "beta-compensation-enable") && + (chip->valid_conf & MAX6693_CONF_BETA)) { + confreg |= MAX6693_CONF_BETA; } - prop = of_get_property(node, "transistor-ideality", &len); - if (prop && len == 2 * sizeof(u32)) { - pdata->ideality_mask = be32_to_cpu(prop[0]); - pdata->ideality_value = be32_to_cpu(prop[1]); + + if (of_property_read_u32(node, "alert-mask", vals)) + vals[0] = 0; + ret = i2c_smbus_write_byte_data(client, MAX6697_REG_ALERT_MASK, + MAX6697_ALERT_MAP_BITS(vals[0])); + if (ret) + return ret; + + if (of_property_read_u32(node, "over-temperature-mask", vals)) + vals[0] = 0; + ret = i2c_smbus_write_byte_data(client, MAX6697_REG_OVERT_MASK, + MAX6697_OVERT_MAP_BITS(vals[0])); + if (ret) + return ret; + + if (data->type != max6581) { + if (of_property_read_bool(node, "resistance-cancellation") && + chip->valid_conf & MAX6697_CONF_RESISTANCE) { + confreg |= MAX6697_CONF_RESISTANCE; + factor = 1; + } + } else { + if (of_property_read_u32(node, "resistance-cancellation", &vals[0])) { + if (of_property_read_bool(node, "resistance-cancellation")) + vals[0] = 0xfe; + else + vals[0] = 0; + } + + vals[0] &= 0xfe; + factor = hweight8(vals[0]); + ret = i2c_smbus_write_byte_data(client, MAX6581_REG_RESISTANCE, + vals[0] >> 1); + if (ret < 0) + return ret; + + if (of_property_read_u32_array(node, "transistor-ideality", vals, 2)) { + vals[0] = 0; + vals[1] = 0; + } + + ret = i2c_smbus_write_byte_data(client, MAX6581_REG_IDEALITY, + vals[1]); + if (ret < 0) + return ret; + ret = i2c_smbus_write_byte_data(client, + MAX6581_REG_IDEALITY_SELECT, + (vals[0] & 0xfe) >> 1); + if (ret < 0) + return ret; } + ret = i2c_smbus_write_byte_data(client, MAX6697_REG_CONFIG, confreg); + if (ret < 0) + return ret; + return factor; } static int max6697_init_chip(struct max6697_data *data, struct i2c_client *client) { - struct max6697_platform_data *pdata = dev_get_platdata(&client->dev); - struct max6697_platform_data p; const struct max6697_chip_data *chip = data->chip; int factor = chip->channels; int ret, reg; /* - * Don't touch configuration if neither platform data nor OF - * configuration was specified. If that is the case, use the - * current chip configuration. + * Don't touch configuration if there is no devicetree configuration. + * If that is the case, use the current chip configuration. */ - if (!pdata && !client->dev.of_node) { + if (!client->dev.of_node) { reg = i2c_smbus_read_byte_data(client, MAX6697_REG_CONFIG); if (reg < 0) return reg; @@ -621,67 +662,14 @@ static int max6697_init_chip(struct max6697_data *data, if (reg & MAX6697_CONF_RESISTANCE) factor++; } - goto done; - } - - if (client->dev.of_node) { - memset(&p, 0, sizeof(p)); - max6697_get_config_of(client->dev.of_node, &p); - pdata = &p; - } - - reg = 0; - if (pdata->smbus_timeout_disable && - (chip->valid_conf & MAX6697_CONF_TIMEOUT)) { - reg |= MAX6697_CONF_TIMEOUT; - } - if (pdata->extended_range_enable && - (chip->valid_conf & MAX6581_CONF_EXTENDED)) { - reg |= MAX6581_CONF_EXTENDED; - data->temp_offset = 64; - } - if (pdata->resistance_cancellation && - (chip->valid_conf & MAX6697_CONF_RESISTANCE)) { - reg |= MAX6697_CONF_RESISTANCE; - factor++; - } - if (pdata->beta_compensation && - (chip->valid_conf & MAX6693_CONF_BETA)) { - reg |= MAX6693_CONF_BETA; - } - - ret = i2c_smbus_write_byte_data(client, MAX6697_REG_CONFIG, reg); - if (ret < 0) - return ret; - - ret = i2c_smbus_write_byte_data(client, MAX6697_REG_ALERT_MASK, - MAX6697_ALERT_MAP_BITS(pdata->alert_mask)); - if (ret < 0) - return ret; - - ret = i2c_smbus_write_byte_data(client, MAX6697_REG_OVERT_MASK, - MAX6697_OVERT_MAP_BITS(pdata->over_temperature_mask)); - if (ret < 0) - return ret; - - if (data->type == max6581) { - factor += hweight8(pdata->resistance_cancellation >> 1); - ret = i2c_smbus_write_byte_data(client, MAX6581_REG_RESISTANCE, - pdata->resistance_cancellation >> 1); - if (ret < 0) - return ret; - ret = i2c_smbus_write_byte_data(client, MAX6581_REG_IDEALITY, - pdata->ideality_value); - if (ret < 0) - return ret; - ret = i2c_smbus_write_byte_data(client, - MAX6581_REG_IDEALITY_SELECT, - pdata->ideality_mask >> 1); + data->update_interval = factor * MAX6697_CONV_TIME; + } else { + ret = max6697_config_of(data, client); if (ret < 0) return ret; + data->update_interval = (factor + ret) * MAX6697_CONV_TIME; } -done: - data->update_interval = factor * MAX6697_CONV_TIME; + return 0; } diff --git a/include/linux/platform_data/max6697.h b/include/linux/platform_data/max6697.h deleted file mode 100644 index 6fbb70005541..000000000000 --- a/include/linux/platform_data/max6697.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * max6697.h - * Copyright (c) 2012 Guenter Roeck - */ - -#ifndef MAX6697_H -#define MAX6697_H - -#include - -/* - * For all bit masks: - * bit 0: local temperature - * bit 1..7: remote temperatures - */ -struct max6697_platform_data { - bool smbus_timeout_disable; /* set to disable SMBus timeouts */ - bool extended_range_enable; /* set to enable extended temp range */ - bool beta_compensation; /* set to enable beta compensation */ - u8 alert_mask; /* set bit to 1 to disable alert */ - u8 over_temperature_mask; /* set bit to 1 to disable */ - u8 resistance_cancellation; /* set bit to 0 to disable - * bit mask for MAX6581, - * boolean for other chips - */ - u8 ideality_mask; /* set bit to 0 to disable */ - u8 ideality_value; /* transistor ideality as per - * MAX6581 datasheet - */ -}; - -#endif /* MAX6697_H */ -- cgit v1.2.3 From bcbfcebda2cbc6a10a347d726e4a4f69e43a864e Mon Sep 17 00:00:00 2001 From: Mohamed Ghanmi Date: Sun, 9 Jun 2024 15:48:49 +0100 Subject: platform/x86: asus-wmi: add support for vivobook fan profiles Add support for vivobook fan profiles wmi call on the ASUS VIVOBOOK to adjust power limits. These fan profiles have a different device id than the ROG series and different order. This reorders the existing modes. As part of keeping the patch clean the throttle_thermal_policy_available boolean stored in the driver struct is removed and throttle_thermal_policy_dev is used in place (as on init it is zeroed). Co-developed-by: Luke D. Jones Signed-off-by: Luke D. Jones Signed-off-by: Mohamed Ghanmi Reviewed-by: Luke D. Jones Link: https://lore.kernel.org/r/20240609144849.2532-2-mohamed.ghanmi@supcom.tn Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/asus-wmi.c | 120 +++++++++++++++++------------ include/linux/platform_data/x86/asus-wmi.h | 1 + 2 files changed, 71 insertions(+), 50 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index cc735931f97b..00669cf678fb 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -97,6 +97,12 @@ module_param(fnlock_default, bool, 0444); #define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST 1 #define ASUS_THROTTLE_THERMAL_POLICY_SILENT 2 +#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO 0 +#define ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO 1 +#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO 2 + +#define PLATFORM_PROFILE_MAX 2 + #define USB_INTEL_XUSB2PR 0xD0 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 @@ -286,8 +292,8 @@ struct asus_wmi { u32 kbd_rgb_dev; bool kbd_rgb_state_available; - bool throttle_thermal_policy_available; u8 throttle_thermal_policy_mode; + u32 throttle_thermal_policy_dev; bool cpu_fan_curve_available; bool gpu_fan_curve_available; @@ -3162,7 +3168,7 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev) int err, fan_idx; u8 mode = 0; - if (asus->throttle_thermal_policy_available) + if (asus->throttle_thermal_policy_dev) mode = asus->throttle_thermal_policy_mode; /* DEVID_PU_FAN_CURVE is switched for OVERBOOST vs SILENT */ if (mode == 2) @@ -3369,7 +3375,7 @@ static ssize_t fan_curve_enable_store(struct device *dev, * For machines with throttle this is the only way to reset fans * to default mode of operation (does not erase curve data). */ - if (asus->throttle_thermal_policy_available) { + if (asus->throttle_thermal_policy_dev) { err = throttle_thermal_policy_write(asus); if (err) return err; @@ -3586,8 +3592,8 @@ static const struct attribute_group asus_fan_curve_attr_group = { __ATTRIBUTE_GROUPS(asus_fan_curve_attr); /* - * Must be initialised after throttle_thermal_policy_check_present() as - * we check the status of throttle_thermal_policy_available during init. + * Must be initialised after throttle_thermal_policy_dev is set as + * we check the status of throttle_thermal_policy_dev during init. */ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) { @@ -3628,38 +3634,13 @@ static int asus_wmi_custom_fan_curve_init(struct asus_wmi *asus) } /* Throttle thermal policy ****************************************************/ - -static int throttle_thermal_policy_check_present(struct asus_wmi *asus) -{ - u32 result; - int err; - - asus->throttle_thermal_policy_available = false; - - err = asus_wmi_get_devstate(asus, - ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, - &result); - if (err) { - if (err == -ENODEV) - return 0; - return err; - } - - if (result & ASUS_WMI_DSTS_PRESENCE_BIT) - asus->throttle_thermal_policy_available = true; - - return 0; -} - static int throttle_thermal_policy_write(struct asus_wmi *asus) { - int err; - u8 value; + u8 value = asus->throttle_thermal_policy_mode; u32 retval; + int err; - value = asus->throttle_thermal_policy_mode; - - err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY, + err = asus_wmi_set_devstate(asus->throttle_thermal_policy_dev, value, &retval); sysfs_notify(&asus->platform_device->dev.kobj, NULL, @@ -3689,7 +3670,7 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus) static int throttle_thermal_policy_set_default(struct asus_wmi *asus) { - if (!asus->throttle_thermal_policy_available) + if (!asus->throttle_thermal_policy_dev) return 0; asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; @@ -3701,7 +3682,7 @@ static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) u8 new_mode = asus->throttle_thermal_policy_mode + 1; int err; - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) + if (new_mode > PLATFORM_PROFILE_MAX) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; asus->throttle_thermal_policy_mode = new_mode; @@ -3740,7 +3721,7 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, if (result < 0) return result; - if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) + if (new_mode > PLATFORM_PROFILE_MAX) return -EINVAL; asus->throttle_thermal_policy_mode = new_mode; @@ -3757,10 +3738,52 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, return count; } -// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent +/* + * Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent + */ static DEVICE_ATTR_RW(throttle_thermal_policy); /* Platform profile ***********************************************************/ +static int asus_wmi_platform_profile_to_vivo(struct asus_wmi *asus, int mode) +{ + bool vivo; + + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + + if (vivo) { + switch (mode) { + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: + return ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO; + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: + return ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO; + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: + return ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO; + } + } + + return mode; +} + +static int asus_wmi_platform_profile_mode_from_vivo(struct asus_wmi *asus, int mode) +{ + bool vivo; + + vivo = asus->throttle_thermal_policy_dev == ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + + if (vivo) { + switch (mode) { + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT_VIVO: + return ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST_VIVO: + return ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; + case ASUS_THROTTLE_THERMAL_POLICY_SILENT_VIVO: + return ASUS_THROTTLE_THERMAL_POLICY_SILENT; + } + } + + return mode; +} + static int asus_wmi_platform_profile_get(struct platform_profile_handler *pprof, enum platform_profile_option *profile) { @@ -3768,10 +3791,9 @@ static int asus_wmi_platform_profile_get(struct platform_profile_handler *pprof, int tp; asus = container_of(pprof, struct asus_wmi, platform_profile_handler); - tp = asus->throttle_thermal_policy_mode; - switch (tp) { + switch (asus_wmi_platform_profile_mode_from_vivo(asus, tp)) { case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: *profile = PLATFORM_PROFILE_BALANCED; break; @@ -3810,7 +3832,7 @@ static int asus_wmi_platform_profile_set(struct platform_profile_handler *pprof, return -EOPNOTSUPP; } - asus->throttle_thermal_policy_mode = tp; + asus->throttle_thermal_policy_mode = asus_wmi_platform_profile_to_vivo(asus, tp); return throttle_thermal_policy_write(asus); } @@ -3823,7 +3845,7 @@ static int platform_profile_setup(struct asus_wmi *asus) * Not an error if a component platform_profile relies on is unavailable * so early return, skipping the setup of platform_profile. */ - if (!asus->throttle_thermal_policy_available) + if (!asus->throttle_thermal_policy_dev) return 0; dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); @@ -4238,7 +4260,7 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus) if (code == NOTIFY_KBD_FBM || code == NOTIFY_KBD_TTP) { if (asus->fan_boost_mode_available) fan_boost_mode_switch_next(asus); - if (asus->throttle_thermal_policy_available) + if (asus->throttle_thermal_policy_dev) throttle_thermal_policy_switch_next(asus); return; @@ -4410,7 +4432,7 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj, else if (attr == &dev_attr_fan_boost_mode.attr) ok = asus->fan_boost_mode_available; else if (attr == &dev_attr_throttle_thermal_policy.attr) - ok = asus->throttle_thermal_policy_available; + ok = asus->throttle_thermal_policy_dev != 0; else if (attr == &dev_attr_ppt_pl2_sppt.attr) devid = ASUS_WMI_DEVID_PPT_PL2_SPPT; else if (attr == &dev_attr_ppt_pl1_spl.attr) @@ -4702,16 +4724,15 @@ static int asus_wmi_add(struct platform_device *pdev) else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_MODE2)) asus->kbd_rgb_dev = ASUS_WMI_DEVID_TUF_RGB_MODE2; + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY)) + asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY; + else if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO)) + asus->throttle_thermal_policy_dev = ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO; + err = fan_boost_mode_check_present(asus); if (err) goto fail_fan_boost_mode; - err = throttle_thermal_policy_check_present(asus); - if (err) - goto fail_throttle_thermal_policy; - else - throttle_thermal_policy_set_default(asus); - err = platform_profile_setup(asus); if (err) goto fail_platform_profile_setup; @@ -4806,7 +4827,6 @@ fail_hwmon: fail_input: asus_wmi_sysfs_exit(asus->platform_device); fail_sysfs: -fail_throttle_thermal_policy: fail_custom_fan_curve: fail_platform_profile_setup: if (asus->platform_profile_support) diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 0aeeae1c1943..5e6f407b2def 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -68,6 +68,7 @@ #define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 #define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 +#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY_VIVO 0x00110019 /* Misc */ #define ASUS_WMI_DEVID_PANEL_OD 0x00050019 -- cgit v1.2.3 From a720dee5e039238a44c0142dfccdc0e35c1125f7 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Sat, 13 Jul 2024 19:47:33 +1200 Subject: hid-asus: use hid for brightness control on keyboard On almost all ASUS ROG series laptops the MCU used for the USB keyboard also has a HID packet used for setting the brightness. This is usually the same as the WMI method. But in some laptops the WMI method either is missing or doesn't work, so we should default to the HID control. Signed-off-by: Luke D. Jones Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20240713074733.77334-2-luke@ljones.dev Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/hid/hid-asus.c | 7 ++++++ drivers/platform/x86/asus-wmi.c | 3 ++- include/linux/platform_data/x86/asus-wmi.h | 36 ++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 37e6d25593c2..af57a5f03193 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -492,12 +492,19 @@ static void asus_kbd_backlight_work(struct work_struct *work) */ static bool asus_kbd_wmi_led_control_present(struct hid_device *hdev) { + struct asus_drvdata *drvdata = hid_get_drvdata(hdev); u32 value; int ret; if (!IS_ENABLED(CONFIG_ASUS_WMI)) return false; + if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD && + dmi_check_system(asus_use_hid_led_dmi_ids)) { + hid_info(hdev, "using HID for asus::kbd_backlight\n"); + return false; + } + ret = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DSTS, ASUS_WMI_DEVID_KBD_BACKLIGHT, 0, &value); hid_dbg(hdev, "WMI backlight check: rc %d value %x", ret, value); diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 00669cf678fb..35ebb37f68bf 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1714,7 +1714,8 @@ static int asus_wmi_led_init(struct asus_wmi *asus) goto error; } - if (!kbd_led_read(asus, &led_val, NULL)) { + if (!kbd_led_read(asus, &led_val, NULL) && !dmi_check_system(asus_use_hid_led_dmi_ids)) { + pr_info("using asus-wmi for asus::kbd_backlight\n"); asus->kbd_led_wk = led_val; asus->kbd_led.name = "asus::kbd_backlight"; asus->kbd_led.flags = LED_BRIGHT_HW_CHANGED; diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 5e6f407b2def..b601b245a035 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -4,6 +4,7 @@ #include #include +#include /* WMI Methods */ #define ASUS_WMI_METHODID_SPEC 0x43455053 /* BIOS SPECification */ @@ -165,4 +166,39 @@ static inline int asus_wmi_evaluate_method(u32 method_id, u32 arg0, u32 arg1, } #endif +/* To be used by both hid-asus and asus-wmi to determine which controls kbd_brightness */ +static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Zephyrus"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Strix"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GA403U"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605M"), + }, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "RC71L"), + }, + }, + { }, +}; + #endif /* __PLATFORM_DATA_X86_ASUS_WMI_H */ -- cgit v1.2.3 From 25162a4f64f8ba0065f300977589fe1f6af332f0 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 4 Aug 2024 17:16:25 -0700 Subject: Input: cyttsp4 - remove driver The cyttsp4 touchscreen driver was contributed in 2013 and since then has seen no updates. The driver uses platform data (no device tree support) and there are no users of it in the mainline kernel. There were occasional fixes to it for issues either found by static code analysis tools or via visual inspection, but otherwise the driver is completely untested. Remove the driver. Reviewed-by: Linus Walleij Reviewed-by: Javier Martinez Canillas Link: https://lore.kernel.org/r/ZrAZ2cUow_z838tp@google.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/Kconfig | 30 - drivers/input/touchscreen/Makefile | 5 +- drivers/input/touchscreen/cyttsp4_core.c | 2174 ------------------------- drivers/input/touchscreen/cyttsp4_core.h | 448 ----- drivers/input/touchscreen/cyttsp4_i2c.c | 72 - drivers/input/touchscreen/cyttsp4_spi.c | 187 --- drivers/input/touchscreen/cyttsp_core.h | 4 - drivers/input/touchscreen/cyttsp_i2c.c | 55 + drivers/input/touchscreen/cyttsp_i2c_common.c | 86 - include/linux/platform_data/cyttsp4.h | 62 - 10 files changed, 56 insertions(+), 3067 deletions(-) delete mode 100644 drivers/input/touchscreen/cyttsp4_core.c delete mode 100644 drivers/input/touchscreen/cyttsp4_core.h delete mode 100644 drivers/input/touchscreen/cyttsp4_i2c.c delete mode 100644 drivers/input/touchscreen/cyttsp4_spi.c delete mode 100644 drivers/input/touchscreen/cyttsp_i2c_common.c delete mode 100644 include/linux/platform_data/cyttsp4.h (limited to 'include/linux/platform_data') diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0df90c3d743b..1ac26fc2e3eb 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -254,36 +254,6 @@ config TOUCHSCREEN_CYTTSP_SPI To compile this driver as a module, choose M here: the module will be called cyttsp_spi. -config TOUCHSCREEN_CYTTSP4_CORE - tristate "Cypress TrueTouch Gen4 Touchscreen Driver" - help - Core driver for Cypress TrueTouch(tm) Standard Product - Generation4 touchscreen controllers. - - Say Y here if you have a Cypress Gen4 touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here. - -config TOUCHSCREEN_CYTTSP4_I2C - tristate "support I2C bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && I2C - help - Say Y here if the touchscreen is connected via I2C bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_i2c. - -config TOUCHSCREEN_CYTTSP4_SPI - tristate "support SPI bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER - help - Say Y here if the touchscreen is connected via SPI bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_spi. - config TOUCHSCREEN_CYTTSP5 tristate "Cypress TrueTouch Gen5 Touchscreen Driver" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 04dc8039341b..82bc837ca01e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -25,11 +25,8 @@ obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505) += chipone_icn8505.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMA140) += cy8ctma140.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o -obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP5) += cyttsp5.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c deleted file mode 100644 index 7cb26929dc73..000000000000 --- a/drivers/input/touchscreen/cyttsp4_core.c +++ /dev/null @@ -1,2174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp4_core.c - * Cypress TrueTouch(TM) Standard Product V4 Core driver module. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2012 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com - */ - -#include "cyttsp4_core.h" -#include -#include -#include -#include -#include -#include -#include - -/* Timeout in ms. */ -#define CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT 500 -#define CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT 5000 -#define CY_CORE_MODE_CHANGE_TIMEOUT 1000 -#define CY_CORE_RESET_AND_WAIT_TIMEOUT 500 -#define CY_CORE_WAKEUP_TIMEOUT 500 - -#define CY_CORE_STARTUP_RETRY_COUNT 3 - -static const char * const cyttsp4_tch_abs_string[] = { - [CY_TCH_X] = "X", - [CY_TCH_Y] = "Y", - [CY_TCH_P] = "P", - [CY_TCH_T] = "T", - [CY_TCH_E] = "E", - [CY_TCH_O] = "O", - [CY_TCH_W] = "W", - [CY_TCH_MAJ] = "MAJ", - [CY_TCH_MIN] = "MIN", - [CY_TCH_OR] = "OR", - [CY_TCH_NUM_ABS] = "INVALID" -}; - -static const u8 ldr_exit[] = { - 0xFF, 0x01, 0x3B, 0x00, 0x00, 0x4F, 0x6D, 0x17 -}; - -static const u8 ldr_err_app[] = { - 0x01, 0x02, 0x00, 0x00, 0x55, 0xDD, 0x17 -}; - -static inline size_t merge_bytes(u8 high, u8 low) -{ - return (high << 8) + low; -} - -#ifdef VERBOSE_DEBUG -static void cyttsp4_pr_buf(struct device *dev, u8 *pr_buf, u8 *dptr, int size, - const char *data_name) -{ - int i, k; - const char fmt[] = "%02X "; - int max; - - if (!size) - return; - - max = (CY_MAX_PRBUF_SIZE - 1) - sizeof(CY_PR_TRUNCATED); - - pr_buf[0] = 0; - for (i = k = 0; i < size && k < max; i++, k += 3) - scnprintf(pr_buf + k, CY_MAX_PRBUF_SIZE, fmt, dptr[i]); - - dev_vdbg(dev, "%s: %s[0..%d]=%s%s\n", __func__, data_name, size - 1, - pr_buf, size <= max ? "" : CY_PR_TRUNCATED); -} -#else -#define cyttsp4_pr_buf(dev, pr_buf, dptr, size, data_name) do { } while (0) -#endif - -static int cyttsp4_load_status_regs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - struct device *dev = cd->dev; - int rc; - - rc = cyttsp4_adap_read(cd, CY_REG_BASE, si->si_ofs.mode_size, - si->xy_mode); - if (rc < 0) - dev_err(dev, "%s: fail read mode regs r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_mode, - si->si_ofs.mode_size, "xy_mode"); - - return rc; -} - -static int cyttsp4_handshake(struct cyttsp4 *cd, u8 mode) -{ - u8 cmd = mode ^ CY_HST_TOGGLE; - int rc; - - /* - * Mode change issued, handshaking now will cause endless mode change - * requests, for sync mode modechange will do same with handshake - * */ - if (mode & CY_HST_MODE_CHANGE) - return 0; - - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd); - if (rc < 0) - dev_err(cd->dev, "%s: bus write fail on handshake (ret=%d)\n", - __func__, rc); - - return rc; -} - -static int cyttsp4_hw_soft_reset(struct cyttsp4 *cd) -{ - u8 cmd = CY_HST_RESET; - int rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd); - if (rc < 0) { - dev_err(cd->dev, "%s: FAILED to execute SOFT reset\n", - __func__); - return rc; - } - return 0; -} - -static int cyttsp4_hw_hard_reset(struct cyttsp4 *cd) -{ - if (cd->cpdata->xres) { - cd->cpdata->xres(cd->cpdata, cd->dev); - dev_dbg(cd->dev, "%s: execute HARD reset\n", __func__); - return 0; - } - dev_err(cd->dev, "%s: FAILED to execute HARD reset\n", __func__); - return -ENOSYS; -} - -static int cyttsp4_hw_reset(struct cyttsp4 *cd) -{ - int rc = cyttsp4_hw_hard_reset(cd); - if (rc == -ENOSYS) - rc = cyttsp4_hw_soft_reset(cd); - return rc; -} - -/* - * Gets number of bits for a touch filed as parameter, - * sets maximum value for field which is used as bit mask - * and returns number of bytes required for that field - */ -static int cyttsp4_bits_2_bytes(unsigned int nbits, size_t *max) -{ - *max = 1UL << nbits; - return (nbits + 7) / 8; -} - -static int cyttsp4_si_data_offsets(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(si->si_data), - &si->si_data); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read sysinfo data offsets r=%d\n", - __func__, rc); - return rc; - } - - /* Print sysinfo data offsets */ - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)&si->si_data, - sizeof(si->si_data), "sysinfo_data_offsets"); - - /* convert sysinfo data offset bytes into integers */ - - si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh, - si->si_data.map_szl); - si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh, - si->si_data.map_szl); - si->si_ofs.cydata_ofs = merge_bytes(si->si_data.cydata_ofsh, - si->si_data.cydata_ofsl); - si->si_ofs.test_ofs = merge_bytes(si->si_data.test_ofsh, - si->si_data.test_ofsl); - si->si_ofs.pcfg_ofs = merge_bytes(si->si_data.pcfg_ofsh, - si->si_data.pcfg_ofsl); - si->si_ofs.opcfg_ofs = merge_bytes(si->si_data.opcfg_ofsh, - si->si_data.opcfg_ofsl); - si->si_ofs.ddata_ofs = merge_bytes(si->si_data.ddata_ofsh, - si->si_data.ddata_ofsl); - si->si_ofs.mdata_ofs = merge_bytes(si->si_data.mdata_ofsh, - si->si_data.mdata_ofsl); - return rc; -} - -static int cyttsp4_si_get_cydata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int read_offset; - int mfgid_sz, calc_mfgid_sz; - void *p; - int rc; - - if (si->si_ofs.test_ofs <= si->si_ofs.cydata_ofs) { - dev_err(cd->dev, - "%s: invalid offset test_ofs: %zu, cydata_ofs: %zu\n", - __func__, si->si_ofs.test_ofs, si->si_ofs.cydata_ofs); - return -EINVAL; - } - - si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs; - dev_dbg(cd->dev, "%s: cydata size: %zd\n", __func__, - si->si_ofs.cydata_size); - - p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate cydata memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.cydata = p; - - read_offset = si->si_ofs.cydata_ofs; - - /* Read the CYDA registers up to MFGID field */ - rc = cyttsp4_adap_read(cd, read_offset, - offsetof(struct cyttsp4_cydata, mfgid_sz) - + sizeof(si->si_ptrs.cydata->mfgid_sz), - si->si_ptrs.cydata); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - /* Check MFGID size */ - mfgid_sz = si->si_ptrs.cydata->mfgid_sz; - calc_mfgid_sz = si->si_ofs.cydata_size - sizeof(struct cyttsp4_cydata); - if (mfgid_sz != calc_mfgid_sz) { - dev_err(cd->dev, "%s: mismatch in MFGID size, reported:%d calculated:%d\n", - __func__, mfgid_sz, calc_mfgid_sz); - return -EINVAL; - } - - read_offset += offsetof(struct cyttsp4_cydata, mfgid_sz) - + sizeof(si->si_ptrs.cydata->mfgid_sz); - - /* Read the CYDA registers for MFGID field */ - rc = cyttsp4_adap_read(cd, read_offset, si->si_ptrs.cydata->mfgid_sz, - si->si_ptrs.cydata->mfg_id); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - read_offset += si->si_ptrs.cydata->mfgid_sz; - - /* Read the rest of the CYDA registers */ - rc = cyttsp4_adap_read(cd, read_offset, - sizeof(struct cyttsp4_cydata) - - offsetof(struct cyttsp4_cydata, cyito_idh), - &si->si_ptrs.cydata->cyito_idh); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read cydata r=%d\n", - __func__, rc); - return rc; - } - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.cydata, - si->si_ofs.cydata_size, "sysinfo_cydata"); - return rc; -} - -static int cyttsp4_si_get_test_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - if (si->si_ofs.pcfg_ofs <= si->si_ofs.test_ofs) { - dev_err(cd->dev, - "%s: invalid offset pcfg_ofs: %zu, test_ofs: %zu\n", - __func__, si->si_ofs.pcfg_ofs, si->si_ofs.test_ofs); - return -EINVAL; - } - - si->si_ofs.test_size = si->si_ofs.pcfg_ofs - si->si_ofs.test_ofs; - - p = krealloc(si->si_ptrs.test, si->si_ofs.test_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate test memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.test = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.test_ofs, si->si_ofs.test_size, - si->si_ptrs.test); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read test data r=%d\n", - __func__, rc); - return rc; - } - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.test, si->si_ofs.test_size, - "sysinfo_test_data"); - if (si->si_ptrs.test->post_codel & - CY_POST_CODEL_WDG_RST) - dev_info(cd->dev, "%s: %s codel=%02X\n", - __func__, "Reset was a WATCHDOG RESET", - si->si_ptrs.test->post_codel); - - if (!(si->si_ptrs.test->post_codel & - CY_POST_CODEL_CFG_DATA_CRC_FAIL)) - dev_info(cd->dev, "%s: %s codel=%02X\n", __func__, - "Config Data CRC FAIL", - si->si_ptrs.test->post_codel); - - if (!(si->si_ptrs.test->post_codel & - CY_POST_CODEL_PANEL_TEST_FAIL)) - dev_info(cd->dev, "%s: %s codel=%02X\n", - __func__, "PANEL TEST FAIL", - si->si_ptrs.test->post_codel); - - dev_info(cd->dev, "%s: SCANNING is %s codel=%02X\n", - __func__, si->si_ptrs.test->post_codel & 0x08 ? - "ENABLED" : "DISABLED", - si->si_ptrs.test->post_codel); - return rc; -} - -static int cyttsp4_si_get_pcfg_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - if (si->si_ofs.opcfg_ofs <= si->si_ofs.pcfg_ofs) { - dev_err(cd->dev, - "%s: invalid offset opcfg_ofs: %zu, pcfg_ofs: %zu\n", - __func__, si->si_ofs.opcfg_ofs, si->si_ofs.pcfg_ofs); - return -EINVAL; - } - - si->si_ofs.pcfg_size = si->si_ofs.opcfg_ofs - si->si_ofs.pcfg_ofs; - - p = krealloc(si->si_ptrs.pcfg, si->si_ofs.pcfg_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate pcfg memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.pcfg = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size, - si->si_ptrs.pcfg); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read pcfg data r=%d\n", - __func__, rc); - return rc; - } - - si->si_ofs.max_x = merge_bytes((si->si_ptrs.pcfg->res_xh - & CY_PCFG_RESOLUTION_X_MASK), si->si_ptrs.pcfg->res_xl); - si->si_ofs.x_origin = !!(si->si_ptrs.pcfg->res_xh - & CY_PCFG_ORIGIN_X_MASK); - si->si_ofs.max_y = merge_bytes((si->si_ptrs.pcfg->res_yh - & CY_PCFG_RESOLUTION_Y_MASK), si->si_ptrs.pcfg->res_yl); - si->si_ofs.y_origin = !!(si->si_ptrs.pcfg->res_yh - & CY_PCFG_ORIGIN_Y_MASK); - si->si_ofs.max_p = merge_bytes(si->si_ptrs.pcfg->max_zh, - si->si_ptrs.pcfg->max_zl); - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.pcfg, - si->si_ofs.pcfg_size, "sysinfo_pcfg_data"); - return rc; -} - -static int cyttsp4_si_get_opcfg_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - struct cyttsp4_tch_abs_params *tch; - struct cyttsp4_tch_rec_params *tch_old, *tch_new; - enum cyttsp4_tch_abs abs; - int i; - void *p; - int rc; - - if (si->si_ofs.ddata_ofs <= si->si_ofs.opcfg_ofs) { - dev_err(cd->dev, - "%s: invalid offset ddata_ofs: %zu, opcfg_ofs: %zu\n", - __func__, si->si_ofs.ddata_ofs, si->si_ofs.opcfg_ofs); - return -EINVAL; - } - - si->si_ofs.opcfg_size = si->si_ofs.ddata_ofs - si->si_ofs.opcfg_ofs; - - p = krealloc(si->si_ptrs.opcfg, si->si_ofs.opcfg_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: failed to allocate opcfg memory\n", - __func__); - return -ENOMEM; - } - si->si_ptrs.opcfg = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size, - si->si_ptrs.opcfg); - if (rc < 0) { - dev_err(cd->dev, "%s: fail read opcfg data r=%d\n", - __func__, rc); - return rc; - } - si->si_ofs.cmd_ofs = si->si_ptrs.opcfg->cmd_ofs; - si->si_ofs.rep_ofs = si->si_ptrs.opcfg->rep_ofs; - si->si_ofs.rep_sz = (si->si_ptrs.opcfg->rep_szh * 256) + - si->si_ptrs.opcfg->rep_szl; - si->si_ofs.num_btns = si->si_ptrs.opcfg->num_btns; - si->si_ofs.num_btn_regs = (si->si_ofs.num_btns + - CY_NUM_BTN_PER_REG - 1) / CY_NUM_BTN_PER_REG; - si->si_ofs.tt_stat_ofs = si->si_ptrs.opcfg->tt_stat_ofs; - si->si_ofs.obj_cfg0 = si->si_ptrs.opcfg->obj_cfg0; - si->si_ofs.max_tchs = si->si_ptrs.opcfg->max_tchs & - CY_BYTE_OFS_MASK; - si->si_ofs.tch_rec_size = si->si_ptrs.opcfg->tch_rec_size & - CY_BYTE_OFS_MASK; - - /* Get the old touch fields */ - for (abs = CY_TCH_X; abs < CY_NUM_TCH_FIELDS; abs++) { - tch = &si->si_ofs.tch_abs[abs]; - tch_old = &si->si_ptrs.opcfg->tch_rec_old[abs]; - - tch->ofs = tch_old->loc & CY_BYTE_OFS_MASK; - tch->size = cyttsp4_bits_2_bytes(tch_old->size, - &tch->max); - tch->bofs = (tch_old->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT; - } - - /* button fields */ - si->si_ofs.btn_rec_size = si->si_ptrs.opcfg->btn_rec_size; - si->si_ofs.btn_diff_ofs = si->si_ptrs.opcfg->btn_diff_ofs; - si->si_ofs.btn_diff_size = si->si_ptrs.opcfg->btn_diff_size; - - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) { - /* Get the extended touch fields */ - for (i = 0; i < CY_NUM_EXT_TCH_FIELDS; abs++, i++) { - tch = &si->si_ofs.tch_abs[abs]; - tch_new = &si->si_ptrs.opcfg->tch_rec_new[i]; - - tch->ofs = tch_new->loc & CY_BYTE_OFS_MASK; - tch->size = cyttsp4_bits_2_bytes(tch_new->size, - &tch->max); - tch->bofs = (tch_new->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT; - } - } - - for (abs = 0; abs < CY_TCH_NUM_ABS; abs++) { - dev_dbg(cd->dev, "%s: tch_rec_%s\n", __func__, - cyttsp4_tch_abs_string[abs]); - dev_dbg(cd->dev, "%s: ofs =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].ofs); - dev_dbg(cd->dev, "%s: siz =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].size); - dev_dbg(cd->dev, "%s: max =%2zd\n", __func__, - si->si_ofs.tch_abs[abs].max); - dev_dbg(cd->dev, "%s: bofs=%2zd\n", __func__, - si->si_ofs.tch_abs[abs].bofs); - } - - si->si_ofs.mode_size = si->si_ofs.tt_stat_ofs + 1; - si->si_ofs.data_size = si->si_ofs.max_tchs * - si->si_ptrs.opcfg->tch_rec_size; - - cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.opcfg, - si->si_ofs.opcfg_size, "sysinfo_opcfg_data"); - - return 0; -} - -static int cyttsp4_si_get_ddata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - si->si_ofs.ddata_size = si->si_ofs.mdata_ofs - si->si_ofs.ddata_ofs; - - p = krealloc(si->si_ptrs.ddata, si->si_ofs.ddata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: fail alloc ddata memory\n", __func__); - return -ENOMEM; - } - si->si_ptrs.ddata = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.ddata_ofs, si->si_ofs.ddata_size, - si->si_ptrs.ddata); - if (rc < 0) - dev_err(cd->dev, "%s: fail read ddata data r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.ddata, - si->si_ofs.ddata_size, "sysinfo_ddata"); - return rc; -} - -static int cyttsp4_si_get_mdata(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - int rc; - - si->si_ofs.mdata_size = si->si_ofs.map_sz - si->si_ofs.mdata_ofs; - - p = krealloc(si->si_ptrs.mdata, si->si_ofs.mdata_size, GFP_KERNEL); - if (p == NULL) { - dev_err(cd->dev, "%s: fail alloc mdata memory\n", __func__); - return -ENOMEM; - } - si->si_ptrs.mdata = p; - - rc = cyttsp4_adap_read(cd, si->si_ofs.mdata_ofs, si->si_ofs.mdata_size, - si->si_ptrs.mdata); - if (rc < 0) - dev_err(cd->dev, "%s: fail read mdata data r=%d\n", - __func__, rc); - else - cyttsp4_pr_buf(cd->dev, cd->pr_buf, - (u8 *)si->si_ptrs.mdata, - si->si_ofs.mdata_size, "sysinfo_mdata"); - return rc; -} - -static int cyttsp4_si_get_btn_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int btn; - int num_defined_keys; - u16 *key_table; - void *p; - int rc = 0; - - if (si->si_ofs.num_btns) { - si->si_ofs.btn_keys_size = si->si_ofs.num_btns * - sizeof(struct cyttsp4_btn); - - p = krealloc(si->btn, si->si_ofs.btn_keys_size, - GFP_KERNEL|__GFP_ZERO); - if (p == NULL) { - dev_err(cd->dev, "%s: %s\n", __func__, - "fail alloc btn_keys memory"); - return -ENOMEM; - } - si->btn = p; - - if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS] == NULL) - num_defined_keys = 0; - else if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS]->data == NULL) - num_defined_keys = 0; - else - num_defined_keys = cd->cpdata->sett - [CY_IC_GRPNUM_BTN_KEYS]->size; - - for (btn = 0; btn < si->si_ofs.num_btns && - btn < num_defined_keys; btn++) { - key_table = (u16 *)cd->cpdata->sett - [CY_IC_GRPNUM_BTN_KEYS]->data; - si->btn[btn].key_code = key_table[btn]; - si->btn[btn].state = CY_BTN_RELEASED; - si->btn[btn].enabled = true; - } - for (; btn < si->si_ofs.num_btns; btn++) { - si->btn[btn].key_code = KEY_RESERVED; - si->btn[btn].state = CY_BTN_RELEASED; - si->btn[btn].enabled = true; - } - - return rc; - } - - si->si_ofs.btn_keys_size = 0; - kfree(si->btn); - si->btn = NULL; - return rc; -} - -static int cyttsp4_si_get_op_data_ptrs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - void *p; - - p = krealloc(si->xy_mode, si->si_ofs.mode_size, GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->xy_mode = p; - - p = krealloc(si->xy_data, si->si_ofs.data_size, GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->xy_data = p; - - p = krealloc(si->btn_rec_data, - si->si_ofs.btn_rec_size * si->si_ofs.num_btns, - GFP_KERNEL|__GFP_ZERO); - if (p == NULL) - return -ENOMEM; - si->btn_rec_data = p; - - return 0; -} - -static void cyttsp4_si_put_log_data(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - dev_dbg(cd->dev, "%s: cydata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.cydata_ofs, si->si_ofs.cydata_size); - dev_dbg(cd->dev, "%s: test_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.test_ofs, si->si_ofs.test_size); - dev_dbg(cd->dev, "%s: pcfg_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size); - dev_dbg(cd->dev, "%s: opcfg_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size); - dev_dbg(cd->dev, "%s: ddata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.ddata_ofs, si->si_ofs.ddata_size); - dev_dbg(cd->dev, "%s: mdata_ofs =%4zd siz=%4zd\n", __func__, - si->si_ofs.mdata_ofs, si->si_ofs.mdata_size); - - dev_dbg(cd->dev, "%s: cmd_ofs =%4zd\n", __func__, - si->si_ofs.cmd_ofs); - dev_dbg(cd->dev, "%s: rep_ofs =%4zd\n", __func__, - si->si_ofs.rep_ofs); - dev_dbg(cd->dev, "%s: rep_sz =%4zd\n", __func__, - si->si_ofs.rep_sz); - dev_dbg(cd->dev, "%s: num_btns =%4zd\n", __func__, - si->si_ofs.num_btns); - dev_dbg(cd->dev, "%s: num_btn_regs =%4zd\n", __func__, - si->si_ofs.num_btn_regs); - dev_dbg(cd->dev, "%s: tt_stat_ofs =%4zd\n", __func__, - si->si_ofs.tt_stat_ofs); - dev_dbg(cd->dev, "%s: tch_rec_size =%4zd\n", __func__, - si->si_ofs.tch_rec_size); - dev_dbg(cd->dev, "%s: max_tchs =%4zd\n", __func__, - si->si_ofs.max_tchs); - dev_dbg(cd->dev, "%s: mode_size =%4zd\n", __func__, - si->si_ofs.mode_size); - dev_dbg(cd->dev, "%s: data_size =%4zd\n", __func__, - si->si_ofs.data_size); - dev_dbg(cd->dev, "%s: map_sz =%4zd\n", __func__, - si->si_ofs.map_sz); - - dev_dbg(cd->dev, "%s: btn_rec_size =%2zd\n", __func__, - si->si_ofs.btn_rec_size); - dev_dbg(cd->dev, "%s: btn_diff_ofs =%2zd\n", __func__, - si->si_ofs.btn_diff_ofs); - dev_dbg(cd->dev, "%s: btn_diff_size =%2zd\n", __func__, - si->si_ofs.btn_diff_size); - - dev_dbg(cd->dev, "%s: max_x = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_x, si->si_ofs.max_x); - dev_dbg(cd->dev, "%s: x_origin = %zd (%s)\n", __func__, - si->si_ofs.x_origin, - si->si_ofs.x_origin == CY_NORMAL_ORIGIN ? - "left corner" : "right corner"); - dev_dbg(cd->dev, "%s: max_y = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_y, si->si_ofs.max_y); - dev_dbg(cd->dev, "%s: y_origin = %zd (%s)\n", __func__, - si->si_ofs.y_origin, - si->si_ofs.y_origin == CY_NORMAL_ORIGIN ? - "upper corner" : "lower corner"); - dev_dbg(cd->dev, "%s: max_p = 0x%04zX (%zd)\n", __func__, - si->si_ofs.max_p, si->si_ofs.max_p); - - dev_dbg(cd->dev, "%s: xy_mode=%p xy_data=%p\n", __func__, - si->xy_mode, si->xy_data); -} - -static int cyttsp4_get_sysinfo_regs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - int rc; - - rc = cyttsp4_si_data_offsets(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_cydata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_test_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_pcfg_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_opcfg_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_ddata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_mdata(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_btn_data(cd); - if (rc < 0) - return rc; - - rc = cyttsp4_si_get_op_data_ptrs(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to get_op_data\n", - __func__); - return rc; - } - - cyttsp4_si_put_log_data(cd); - - /* provide flow control handshake */ - rc = cyttsp4_handshake(cd, si->si_data.hst_mode); - if (rc < 0) - dev_err(cd->dev, "%s: handshake fail on sysinfo reg\n", - __func__); - - si->ready = true; - return rc; -} - -static void cyttsp4_queue_startup_(struct cyttsp4 *cd) -{ - if (cd->startup_state == STARTUP_NONE) { - cd->startup_state = STARTUP_QUEUED; - schedule_work(&cd->startup_work); - dev_dbg(cd->dev, "%s: cyttsp4_startup queued\n", __func__); - } else { - dev_dbg(cd->dev, "%s: startup_state = %d\n", __func__, - cd->startup_state); - } -} - -static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md, - int max_slots) -{ - int t; - - if (md->num_prv_tch == 0) - return; - - for (t = 0; t < max_slots; t++) { - input_mt_slot(md->input, t); - input_mt_report_slot_inactive(md->input); - } -} - -static void cyttsp4_lift_all(struct cyttsp4_mt_data *md) -{ - if (!md->si) - return; - - if (md->num_prv_tch != 0) { - cyttsp4_report_slot_liftoff(md, - md->si->si_ofs.tch_abs[CY_TCH_T].max); - input_sync(md->input); - md->num_prv_tch = 0; - } -} - -static void cyttsp4_get_touch_axis(struct cyttsp4_mt_data *md, - int *axis, int size, int max, u8 *xy_data, int bofs) -{ - int nbyte; - int next; - - for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++) { - dev_vdbg(&md->input->dev, - "%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p" - " xy_data[%d]=%02X(%d) bofs=%d\n", - __func__, *axis, *axis, size, max, xy_data, next, - xy_data[next], xy_data[next], bofs); - *axis = (*axis * 256) + (xy_data[next] >> bofs); - next++; - } - - *axis &= max - 1; - - dev_vdbg(&md->input->dev, - "%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p" - " xy_data[%d]=%02X(%d)\n", - __func__, *axis, *axis, size, max, xy_data, next, - xy_data[next], xy_data[next]); -} - -static void cyttsp4_get_touch(struct cyttsp4_mt_data *md, - struct cyttsp4_touch *touch, u8 *xy_data) -{ - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - enum cyttsp4_tch_abs abs; - bool flipped; - - for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) { - cyttsp4_get_touch_axis(md, &touch->abs[abs], - si->si_ofs.tch_abs[abs].size, - si->si_ofs.tch_abs[abs].max, - xy_data + si->si_ofs.tch_abs[abs].ofs, - si->si_ofs.tch_abs[abs].bofs); - dev_vdbg(dev, "%s: get %s=%04X(%d)\n", __func__, - cyttsp4_tch_abs_string[abs], - touch->abs[abs], touch->abs[abs]); - } - - if (md->pdata->flags & CY_FLAG_FLIP) { - swap(touch->abs[CY_TCH_X], touch->abs[CY_TCH_Y]); - flipped = true; - } else - flipped = false; - - if (md->pdata->flags & CY_FLAG_INV_X) { - if (flipped) - touch->abs[CY_TCH_X] = md->si->si_ofs.max_y - - touch->abs[CY_TCH_X]; - else - touch->abs[CY_TCH_X] = md->si->si_ofs.max_x - - touch->abs[CY_TCH_X]; - } - if (md->pdata->flags & CY_FLAG_INV_Y) { - if (flipped) - touch->abs[CY_TCH_Y] = md->si->si_ofs.max_x - - touch->abs[CY_TCH_Y]; - else - touch->abs[CY_TCH_Y] = md->si->si_ofs.max_y - - touch->abs[CY_TCH_Y]; - } - - dev_vdbg(dev, "%s: flip=%s inv-x=%s inv-y=%s x=%04X(%d) y=%04X(%d)\n", - __func__, flipped ? "true" : "false", - md->pdata->flags & CY_FLAG_INV_X ? "true" : "false", - md->pdata->flags & CY_FLAG_INV_Y ? "true" : "false", - touch->abs[CY_TCH_X], touch->abs[CY_TCH_X], - touch->abs[CY_TCH_Y], touch->abs[CY_TCH_Y]); -} - -static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids) -{ - int t; - - for (t = 0; t < max_slots; t++) { - if (ids[t]) - continue; - input_mt_slot(input, t); - input_mt_report_slot_inactive(input); - } - - input_sync(input); -} - -static void cyttsp4_get_mt_touches(struct cyttsp4_mt_data *md, int num_cur_tch) -{ - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - struct cyttsp4_touch tch; - int sig; - int i, j, t = 0; - int ids[max(CY_TMA1036_MAX_TCH, CY_TMA4XX_MAX_TCH)]; - - memset(ids, 0, si->si_ofs.tch_abs[CY_TCH_T].max * sizeof(int)); - for (i = 0; i < num_cur_tch; i++) { - cyttsp4_get_touch(md, &tch, si->xy_data + - (i * si->si_ofs.tch_rec_size)); - if ((tch.abs[CY_TCH_T] < md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]) || - (tch.abs[CY_TCH_T] > md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MAX_OST])) { - dev_err(dev, "%s: tch=%d -> bad trk_id=%d max_id=%d\n", - __func__, i, tch.abs[CY_TCH_T], - md->pdata->frmwrk->abs[(CY_ABS_ID_OST * - CY_NUM_ABS_SET) + CY_MAX_OST]); - continue; - } - - /* use 0 based track id's */ - sig = md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) { - t = tch.abs[CY_TCH_T] - md->pdata->frmwrk->abs - [(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]; - if (tch.abs[CY_TCH_E] == CY_EV_LIFTOFF) { - dev_dbg(dev, "%s: t=%d e=%d lift-off\n", - __func__, t, tch.abs[CY_TCH_E]); - goto cyttsp4_get_mt_touches_pr_tch; - } - input_mt_slot(md->input, t); - input_mt_report_slot_state(md->input, MT_TOOL_FINGER, - true); - ids[t] = true; - } - - /* all devices: position and pressure fields */ - for (j = 0; j <= CY_ABS_W_OST; j++) { - sig = md->pdata->frmwrk->abs[((CY_ABS_X_OST + j) * - CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) - input_report_abs(md->input, sig, - tch.abs[CY_TCH_X + j]); - } - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) { - /* - * TMA400 size and orientation fields: - * if pressure is non-zero and major touch - * signal is zero, then set major and minor touch - * signals to minimum non-zero value - */ - if (tch.abs[CY_TCH_P] > 0 && tch.abs[CY_TCH_MAJ] == 0) - tch.abs[CY_TCH_MAJ] = tch.abs[CY_TCH_MIN] = 1; - - /* Get the extended touch fields */ - for (j = 0; j < CY_NUM_EXT_TCH_FIELDS; j++) { - sig = md->pdata->frmwrk->abs - [((CY_ABS_MAJ_OST + j) * - CY_NUM_ABS_SET) + 0]; - if (sig != CY_IGNORE_VALUE) - input_report_abs(md->input, sig, - tch.abs[CY_TCH_MAJ + j]); - } - } - -cyttsp4_get_mt_touches_pr_tch: - if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) - dev_dbg(dev, - "%s: t=%d x=%d y=%d z=%d M=%d m=%d o=%d e=%d\n", - __func__, t, - tch.abs[CY_TCH_X], - tch.abs[CY_TCH_Y], - tch.abs[CY_TCH_P], - tch.abs[CY_TCH_MAJ], - tch.abs[CY_TCH_MIN], - tch.abs[CY_TCH_OR], - tch.abs[CY_TCH_E]); - else - dev_dbg(dev, - "%s: t=%d x=%d y=%d z=%d e=%d\n", __func__, - t, - tch.abs[CY_TCH_X], - tch.abs[CY_TCH_Y], - tch.abs[CY_TCH_P], - tch.abs[CY_TCH_E]); - } - - cyttsp4_final_sync(md->input, si->si_ofs.tch_abs[CY_TCH_T].max, ids); - - md->num_prv_tch = num_cur_tch; - - return; -} - -/* read xy_data for all current touches */ -static int cyttsp4_xy_worker(struct cyttsp4 *cd) -{ - struct cyttsp4_mt_data *md = &cd->md; - struct device *dev = &md->input->dev; - struct cyttsp4_sysinfo *si = md->si; - u8 num_cur_tch; - u8 hst_mode; - u8 rep_len; - u8 rep_stat; - u8 tt_stat; - int rc = 0; - - /* - * Get event data from cyttsp4 device. - * The event data includes all data - * for all active touches. - * Event data also includes button data - */ - /* - * Use 2 reads: - * 1st read to get mode + button bytes + touch count (core) - * 2nd read (optional) to get touch 1 - touch n data - */ - hst_mode = si->xy_mode[CY_REG_BASE]; - rep_len = si->xy_mode[si->si_ofs.rep_ofs]; - rep_stat = si->xy_mode[si->si_ofs.rep_ofs + 1]; - tt_stat = si->xy_mode[si->si_ofs.tt_stat_ofs]; - dev_vdbg(dev, "%s: %s%02X %s%d %s%02X %s%02X\n", __func__, - "hst_mode=", hst_mode, "rep_len=", rep_len, - "rep_stat=", rep_stat, "tt_stat=", tt_stat); - - num_cur_tch = GET_NUM_TOUCHES(tt_stat); - dev_vdbg(dev, "%s: num_cur_tch=%d\n", __func__, num_cur_tch); - - if (rep_len == 0 && num_cur_tch > 0) { - dev_err(dev, "%s: report length error rep_len=%d num_tch=%d\n", - __func__, rep_len, num_cur_tch); - goto cyttsp4_xy_worker_exit; - } - - /* read touches */ - if (num_cur_tch > 0) { - rc = cyttsp4_adap_read(cd, si->si_ofs.tt_stat_ofs + 1, - num_cur_tch * si->si_ofs.tch_rec_size, - si->xy_data); - if (rc < 0) { - dev_err(dev, "%s: read fail on touch regs r=%d\n", - __func__, rc); - goto cyttsp4_xy_worker_exit; - } - } - - /* print xy data */ - cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_data, num_cur_tch * - si->si_ofs.tch_rec_size, "xy_data"); - - /* check any error conditions */ - if (IS_BAD_PKT(rep_stat)) { - dev_dbg(dev, "%s: Invalid buffer detected\n", __func__); - rc = 0; - goto cyttsp4_xy_worker_exit; - } - - if (IS_LARGE_AREA(tt_stat)) - dev_dbg(dev, "%s: Large area detected\n", __func__); - - if (num_cur_tch > si->si_ofs.max_tchs) { - dev_err(dev, "%s: too many tch; set to max tch (n=%d c=%zd)\n", - __func__, num_cur_tch, si->si_ofs.max_tchs); - num_cur_tch = si->si_ofs.max_tchs; - } - - /* extract xy_data for all currently reported touches */ - dev_vdbg(dev, "%s: extract data num_cur_tch=%d\n", __func__, - num_cur_tch); - if (num_cur_tch) - cyttsp4_get_mt_touches(md, num_cur_tch); - else - cyttsp4_lift_all(md); - - rc = 0; - -cyttsp4_xy_worker_exit: - return rc; -} - -static int cyttsp4_mt_attention(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - int rc = 0; - - if (!md->si) - return 0; - - mutex_lock(&md->report_lock); - if (!md->is_suspended) { - /* core handles handshake */ - rc = cyttsp4_xy_worker(cd); - } else { - dev_vdbg(dev, "%s: Ignoring report while suspended\n", - __func__); - } - mutex_unlock(&md->report_lock); - if (rc < 0) - dev_err(dev, "%s: xy_worker error r=%d\n", __func__, rc); - - return rc; -} - -static irqreturn_t cyttsp4_irq(int irq, void *handle) -{ - struct cyttsp4 *cd = handle; - struct device *dev = cd->dev; - enum cyttsp4_mode cur_mode; - u8 cmd_ofs = cd->sysinfo.si_ofs.cmd_ofs; - u8 mode[3]; - int rc; - - /* - * Check whether this IRQ should be ignored (external) - * This should be the very first thing to check since - * ignore_irq may be set for a very short period of time - */ - if (atomic_read(&cd->ignore_irq)) { - dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__); - return IRQ_HANDLED; - } - - dev_dbg(dev, "%s int:0x%x\n", __func__, cd->int_status); - - mutex_lock(&cd->system_lock); - - /* Just to debug */ - if (cd->sleep_state == SS_SLEEP_ON || cd->sleep_state == SS_SLEEPING) - dev_vdbg(dev, "%s: Received IRQ while in sleep\n", __func__); - - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), mode); - if (rc) { - dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc); - goto cyttsp4_irq_exit; - } - dev_vdbg(dev, "%s mode[0-2]:0x%X 0x%X 0x%X\n", __func__, - mode[0], mode[1], mode[2]); - - if (IS_BOOTLOADER(mode[0], mode[1])) { - cur_mode = CY_MODE_BOOTLOADER; - dev_vdbg(dev, "%s: bl running\n", __func__); - if (cd->mode == CY_MODE_BOOTLOADER) { - /* Signal bootloader heartbeat heard */ - wake_up(&cd->wait_q); - goto cyttsp4_irq_exit; - } - - /* switch to bootloader */ - dev_dbg(dev, "%s: restart switch to bl m=%d -> m=%d\n", - __func__, cd->mode, cur_mode); - - /* catch operation->bl glitch */ - if (cd->mode != CY_MODE_UNKNOWN) { - /* Incase startup_state do not let startup_() */ - cd->mode = CY_MODE_UNKNOWN; - cyttsp4_queue_startup_(cd); - goto cyttsp4_irq_exit; - } - - /* - * do not wake thread on this switch since - * it is possible to get an early heartbeat - * prior to performing the reset - */ - cd->mode = cur_mode; - - goto cyttsp4_irq_exit; - } - - switch (mode[0] & CY_HST_MODE) { - case CY_HST_OPERATE: - cur_mode = CY_MODE_OPERATIONAL; - dev_vdbg(dev, "%s: operational\n", __func__); - break; - case CY_HST_CAT: - cur_mode = CY_MODE_CAT; - dev_vdbg(dev, "%s: CaT\n", __func__); - break; - case CY_HST_SYSINFO: - cur_mode = CY_MODE_SYSINFO; - dev_vdbg(dev, "%s: sysinfo\n", __func__); - break; - default: - cur_mode = CY_MODE_UNKNOWN; - dev_err(dev, "%s: unknown HST mode 0x%02X\n", __func__, - mode[0]); - break; - } - - /* Check whether this IRQ should be ignored (internal) */ - if (cd->int_status & CY_INT_IGNORE) { - dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__); - goto cyttsp4_irq_exit; - } - - /* Check for wake up interrupt */ - if (cd->int_status & CY_INT_AWAKE) { - cd->int_status &= ~CY_INT_AWAKE; - wake_up(&cd->wait_q); - dev_vdbg(dev, "%s: Received wake up interrupt\n", __func__); - goto cyttsp4_irq_handshake; - } - - /* Expecting mode change interrupt */ - if ((cd->int_status & CY_INT_MODE_CHANGE) - && (mode[0] & CY_HST_MODE_CHANGE) == 0) { - cd->int_status &= ~CY_INT_MODE_CHANGE; - dev_dbg(dev, "%s: finish mode switch m=%d -> m=%d\n", - __func__, cd->mode, cur_mode); - cd->mode = cur_mode; - wake_up(&cd->wait_q); - goto cyttsp4_irq_handshake; - } - - /* compare current core mode to current device mode */ - dev_vdbg(dev, "%s: cd->mode=%d cur_mode=%d\n", - __func__, cd->mode, cur_mode); - if ((mode[0] & CY_HST_MODE_CHANGE) == 0 && cd->mode != cur_mode) { - /* Unexpected mode change occurred */ - dev_err(dev, "%s %d->%d 0x%x\n", __func__, cd->mode, - cur_mode, cd->int_status); - dev_dbg(dev, "%s: Unexpected mode change, startup\n", - __func__); - cyttsp4_queue_startup_(cd); - goto cyttsp4_irq_exit; - } - - /* Expecting command complete interrupt */ - dev_vdbg(dev, "%s: command byte:0x%x\n", __func__, mode[cmd_ofs]); - if ((cd->int_status & CY_INT_EXEC_CMD) - && mode[cmd_ofs] & CY_CMD_COMPLETE) { - cd->int_status &= ~CY_INT_EXEC_CMD; - dev_vdbg(dev, "%s: Received command complete interrupt\n", - __func__); - wake_up(&cd->wait_q); - /* - * It is possible to receive a single interrupt for - * command complete and touch/button status report. - * Continue processing for a possible status report. - */ - } - - /* This should be status report, read status regs */ - if (cd->mode == CY_MODE_OPERATIONAL) { - dev_vdbg(dev, "%s: Read status registers\n", __func__); - rc = cyttsp4_load_status_regs(cd); - if (rc < 0) - dev_err(dev, "%s: fail read mode regs r=%d\n", - __func__, rc); - } - - cyttsp4_mt_attention(cd); - -cyttsp4_irq_handshake: - /* handshake the event */ - dev_vdbg(dev, "%s: Handshake mode=0x%02X r=%d\n", - __func__, mode[0], rc); - rc = cyttsp4_handshake(cd, mode[0]); - if (rc < 0) - dev_err(dev, "%s: Fail handshake mode=0x%02X r=%d\n", - __func__, mode[0], rc); - - /* - * a non-zero udelay period is required for using - * IRQF_TRIGGER_LOW in order to delay until the - * device completes isr deassert - */ - udelay(cd->cpdata->level_irq_udelay); - -cyttsp4_irq_exit: - mutex_unlock(&cd->system_lock); - return IRQ_HANDLED; -} - -static void cyttsp4_start_wd_timer(struct cyttsp4 *cd) -{ - if (!CY_WATCHDOG_TIMEOUT) - return; - - mod_timer(&cd->watchdog_timer, jiffies + - msecs_to_jiffies(CY_WATCHDOG_TIMEOUT)); -} - -static void cyttsp4_stop_wd_timer(struct cyttsp4 *cd) -{ - if (!CY_WATCHDOG_TIMEOUT) - return; - - /* - * Ensure we wait until the watchdog timer - * running on a different CPU finishes - */ - timer_shutdown_sync(&cd->watchdog_timer); - cancel_work_sync(&cd->watchdog_work); -} - -static void cyttsp4_watchdog_timer(struct timer_list *t) -{ - struct cyttsp4 *cd = from_timer(cd, t, watchdog_timer); - - dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__); - - schedule_work(&cd->watchdog_work); - - return; -} - -static int cyttsp4_request_exclusive(struct cyttsp4 *cd, void *ownptr, - int timeout_ms) -{ - int t = msecs_to_jiffies(timeout_ms); - bool with_timeout = (timeout_ms != 0); - - mutex_lock(&cd->system_lock); - if (!cd->exclusive_dev && cd->exclusive_waits == 0) { - cd->exclusive_dev = ownptr; - goto exit; - } - - cd->exclusive_waits++; -wait: - mutex_unlock(&cd->system_lock); - if (with_timeout) { - t = wait_event_timeout(cd->wait_q, !cd->exclusive_dev, t); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting exclusive access\n", - __func__); - mutex_lock(&cd->system_lock); - cd->exclusive_waits--; - mutex_unlock(&cd->system_lock); - return -ETIME; - } - } else { - wait_event(cd->wait_q, !cd->exclusive_dev); - } - mutex_lock(&cd->system_lock); - if (cd->exclusive_dev) - goto wait; - cd->exclusive_dev = ownptr; - cd->exclusive_waits--; -exit: - mutex_unlock(&cd->system_lock); - - return 0; -} - -/* - * returns error if was not owned - */ -static int cyttsp4_release_exclusive(struct cyttsp4 *cd, void *ownptr) -{ - mutex_lock(&cd->system_lock); - if (cd->exclusive_dev != ownptr) { - mutex_unlock(&cd->system_lock); - return -EINVAL; - } - - dev_vdbg(cd->dev, "%s: exclusive_dev %p freed\n", - __func__, cd->exclusive_dev); - cd->exclusive_dev = NULL; - wake_up(&cd->wait_q); - mutex_unlock(&cd->system_lock); - return 0; -} - -static int cyttsp4_wait_bl_heartbeat(struct cyttsp4 *cd) -{ - long t; - int rc = 0; - - /* wait heartbeat */ - dev_vdbg(cd->dev, "%s: wait heartbeat...\n", __func__); - t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_BOOTLOADER, - msecs_to_jiffies(CY_CORE_RESET_AND_WAIT_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting bl heartbeat cd->mode=%d\n", - __func__, cd->mode); - rc = -ETIME; - } - - return rc; -} - -static int cyttsp4_wait_sysinfo_mode(struct cyttsp4 *cd) -{ - long t; - - dev_vdbg(cd->dev, "%s: wait sysinfo...\n", __func__); - - t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_SYSINFO, - msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: tmo waiting exit bl cd->mode=%d\n", - __func__, cd->mode); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_MODE_CHANGE; - mutex_unlock(&cd->system_lock); - return -ETIME; - } - - return 0; -} - -static int cyttsp4_reset_and_wait(struct cyttsp4 *cd) -{ - int rc; - - /* reset hardware */ - mutex_lock(&cd->system_lock); - dev_dbg(cd->dev, "%s: reset hw...\n", __func__); - rc = cyttsp4_hw_reset(cd); - cd->mode = CY_MODE_UNKNOWN; - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s:Fail hw reset r=%d\n", __func__, rc); - return rc; - } - - return cyttsp4_wait_bl_heartbeat(cd); -} - -/* - * returns err if refused or timeout; block until mode change complete - * bit is set (mode change interrupt) - */ -static int cyttsp4_set_mode(struct cyttsp4 *cd, int new_mode) -{ - u8 new_dev_mode; - u8 mode; - long t; - int rc; - - switch (new_mode) { - case CY_MODE_OPERATIONAL: - new_dev_mode = CY_HST_OPERATE; - break; - case CY_MODE_SYSINFO: - new_dev_mode = CY_HST_SYSINFO; - break; - case CY_MODE_CAT: - new_dev_mode = CY_HST_CAT; - break; - default: - dev_err(cd->dev, "%s: invalid mode: %02X(%d)\n", - __func__, new_mode, new_mode); - return -EINVAL; - } - - /* change mode */ - dev_dbg(cd->dev, "%s: %s=%p new_dev_mode=%02X new_mode=%d\n", - __func__, "have exclusive", cd->exclusive_dev, - new_dev_mode, new_mode); - - mutex_lock(&cd->system_lock); - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - if (rc < 0) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Fail read mode r=%d\n", - __func__, rc); - goto exit; - } - - /* Clear device mode bits and set to new mode */ - mode &= ~CY_HST_MODE; - mode |= new_dev_mode | CY_HST_MODE_CHANGE; - - cd->int_status |= CY_INT_MODE_CHANGE; - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode), &mode); - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s: Fail write mode change r=%d\n", - __func__, rc); - goto exit; - } - - /* wait for mode change done interrupt */ - t = wait_event_timeout(cd->wait_q, - (cd->int_status & CY_INT_MODE_CHANGE) == 0, - msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT)); - dev_dbg(cd->dev, "%s: back from wait t=%ld cd->mode=%d\n", - __func__, t, cd->mode); - - if (IS_TMO(t)) { - dev_err(cd->dev, "%s: %s\n", __func__, - "tmo waiting mode change"); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_MODE_CHANGE; - mutex_unlock(&cd->system_lock); - rc = -EINVAL; - } - -exit: - return rc; -} - -static void cyttsp4_watchdog_work(struct work_struct *work) -{ - struct cyttsp4 *cd = - container_of(work, struct cyttsp4, watchdog_work); - u8 *mode; - int retval; - - mutex_lock(&cd->system_lock); - retval = cyttsp4_load_status_regs(cd); - if (retval < 0) { - dev_err(cd->dev, - "%s: failed to access device in watchdog timer r=%d\n", - __func__, retval); - cyttsp4_queue_startup_(cd); - goto cyttsp4_timer_watchdog_exit_error; - } - mode = &cd->sysinfo.xy_mode[CY_REG_BASE]; - if (IS_BOOTLOADER(mode[0], mode[1])) { - dev_err(cd->dev, - "%s: device found in bootloader mode when operational mode\n", - __func__); - cyttsp4_queue_startup_(cd); - goto cyttsp4_timer_watchdog_exit_error; - } - - cyttsp4_start_wd_timer(cd); -cyttsp4_timer_watchdog_exit_error: - mutex_unlock(&cd->system_lock); - return; -} - -static int cyttsp4_core_sleep_(struct cyttsp4 *cd) -{ - enum cyttsp4_sleep_state ss = SS_SLEEP_ON; - enum cyttsp4_int_state int_status = CY_INT_IGNORE; - int rc = 0; - u8 mode[2]; - - /* Already in sleep mode? */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_ON) { - mutex_unlock(&cd->system_lock); - return 0; - } - cd->sleep_state = SS_SLEEPING; - mutex_unlock(&cd->system_lock); - - cyttsp4_stop_wd_timer(cd); - - /* Wait until currently running IRQ handler exits and disable IRQ */ - disable_irq(cd->irq); - - dev_vdbg(cd->dev, "%s: write DEEP SLEEP...\n", __func__); - mutex_lock(&cd->system_lock); - rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - if (rc) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc); - goto error; - } - - if (IS_BOOTLOADER(mode[0], mode[1])) { - mutex_unlock(&cd->system_lock); - dev_err(cd->dev, "%s: Device in BOOTLOADER mode.\n", __func__); - rc = -EINVAL; - goto error; - } - - mode[0] |= CY_HST_SLEEP; - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode[0]), &mode[0]); - mutex_unlock(&cd->system_lock); - if (rc) { - dev_err(cd->dev, "%s: Fail write adapter r=%d\n", __func__, rc); - goto error; - } - dev_vdbg(cd->dev, "%s: write DEEP SLEEP succeeded\n", __func__); - - if (cd->cpdata->power) { - dev_dbg(cd->dev, "%s: Power down HW\n", __func__); - rc = cd->cpdata->power(cd->cpdata, 0, cd->dev, &cd->ignore_irq); - } else { - dev_dbg(cd->dev, "%s: No power function\n", __func__); - rc = 0; - } - if (rc < 0) { - dev_err(cd->dev, "%s: HW Power down fails r=%d\n", - __func__, rc); - goto error; - } - - /* Give time to FW to sleep */ - msleep(50); - - goto exit; - -error: - ss = SS_SLEEP_OFF; - int_status = CY_INT_NONE; - cyttsp4_start_wd_timer(cd); - -exit: - mutex_lock(&cd->system_lock); - cd->sleep_state = ss; - cd->int_status |= int_status; - mutex_unlock(&cd->system_lock); - enable_irq(cd->irq); - return rc; -} - -static int cyttsp4_startup_(struct cyttsp4 *cd) -{ - int retry = CY_CORE_STARTUP_RETRY_COUNT; - int rc; - - cyttsp4_stop_wd_timer(cd); - -reset: - if (retry != CY_CORE_STARTUP_RETRY_COUNT) - dev_dbg(cd->dev, "%s: Retry %d\n", __func__, - CY_CORE_STARTUP_RETRY_COUNT - retry); - - /* reset hardware and wait for heartbeat */ - rc = cyttsp4_reset_and_wait(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: Error on h/w reset r=%d\n", __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - /* exit bl into sysinfo mode */ - dev_vdbg(cd->dev, "%s: write exit ldr...\n", __func__); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_IGNORE; - cd->int_status |= CY_INT_MODE_CHANGE; - - rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(ldr_exit), - (u8 *)ldr_exit); - mutex_unlock(&cd->system_lock); - if (rc < 0) { - dev_err(cd->dev, "%s: Fail write r=%d\n", __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - rc = cyttsp4_wait_sysinfo_mode(cd); - if (rc < 0) { - u8 buf[sizeof(ldr_err_app)]; - int rc1; - - /* Check for invalid/corrupted touch application */ - rc1 = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(ldr_err_app), - buf); - if (rc1) { - dev_err(cd->dev, "%s: Fail read r=%d\n", __func__, rc1); - } else if (!memcmp(buf, ldr_err_app, sizeof(ldr_err_app))) { - dev_err(cd->dev, "%s: Error launching touch application\n", - __func__); - mutex_lock(&cd->system_lock); - cd->invalid_touch_app = true; - mutex_unlock(&cd->system_lock); - goto exit_no_wd; - } - - if (retry--) - goto reset; - goto exit; - } - - mutex_lock(&cd->system_lock); - cd->invalid_touch_app = false; - mutex_unlock(&cd->system_lock); - - /* read sysinfo data */ - dev_vdbg(cd->dev, "%s: get sysinfo regs..\n", __func__); - rc = cyttsp4_get_sysinfo_regs(cd); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to get sysinfo regs rc=%d\n", - __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - rc = cyttsp4_set_mode(cd, CY_MODE_OPERATIONAL); - if (rc < 0) { - dev_err(cd->dev, "%s: failed to set mode to operational rc=%d\n", - __func__, rc); - if (retry--) - goto reset; - goto exit; - } - - cyttsp4_lift_all(&cd->md); - - /* restore to sleep if was suspended */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_ON) { - cd->sleep_state = SS_SLEEP_OFF; - mutex_unlock(&cd->system_lock); - cyttsp4_core_sleep_(cd); - goto exit_no_wd; - } - mutex_unlock(&cd->system_lock); - -exit: - cyttsp4_start_wd_timer(cd); -exit_no_wd: - return rc; -} - -static int cyttsp4_startup(struct cyttsp4 *cd) -{ - int rc; - - mutex_lock(&cd->system_lock); - cd->startup_state = STARTUP_RUNNING; - mutex_unlock(&cd->system_lock); - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - goto exit; - } - - rc = cyttsp4_startup_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - /* Don't return fail code, mode is already changed. */ - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - -exit: - mutex_lock(&cd->system_lock); - cd->startup_state = STARTUP_NONE; - mutex_unlock(&cd->system_lock); - - /* Wake the waiters for end of startup */ - wake_up(&cd->wait_q); - - return rc; -} - -static void cyttsp4_startup_work_function(struct work_struct *work) -{ - struct cyttsp4 *cd = container_of(work, struct cyttsp4, startup_work); - int rc; - - rc = cyttsp4_startup(cd); - if (rc < 0) - dev_err(cd->dev, "%s: Fail queued startup r=%d\n", - __func__, rc); -} - -static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd) -{ - struct cyttsp4_sysinfo *si = &cd->sysinfo; - - if (!si) - return; - - kfree(si->si_ptrs.cydata); - kfree(si->si_ptrs.test); - kfree(si->si_ptrs.pcfg); - kfree(si->si_ptrs.opcfg); - kfree(si->si_ptrs.ddata); - kfree(si->si_ptrs.mdata); - kfree(si->btn); - kfree(si->xy_mode); - kfree(si->xy_data); - kfree(si->btn_rec_data); -} - -static int cyttsp4_core_sleep(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_sleep_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - -static int cyttsp4_core_wake_(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - int rc; - u8 mode; - int t; - - /* Already woken? */ - mutex_lock(&cd->system_lock); - if (cd->sleep_state == SS_SLEEP_OFF) { - mutex_unlock(&cd->system_lock); - return 0; - } - cd->int_status &= ~CY_INT_IGNORE; - cd->int_status |= CY_INT_AWAKE; - cd->sleep_state = SS_WAKING; - - if (cd->cpdata->power) { - dev_dbg(dev, "%s: Power up HW\n", __func__); - rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq); - } else { - dev_dbg(dev, "%s: No power function\n", __func__); - rc = -ENOSYS; - } - if (rc < 0) { - dev_err(dev, "%s: HW Power up fails r=%d\n", - __func__, rc); - - /* Initiate a read transaction to wake up */ - cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode); - } else - dev_vdbg(cd->dev, "%s: HW power up succeeds\n", - __func__); - mutex_unlock(&cd->system_lock); - - t = wait_event_timeout(cd->wait_q, - (cd->int_status & CY_INT_AWAKE) == 0, - msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT)); - if (IS_TMO(t)) { - dev_err(dev, "%s: TMO waiting for wakeup\n", __func__); - mutex_lock(&cd->system_lock); - cd->int_status &= ~CY_INT_AWAKE; - /* Try starting up */ - cyttsp4_queue_startup_(cd); - mutex_unlock(&cd->system_lock); - } - - mutex_lock(&cd->system_lock); - cd->sleep_state = SS_SLEEP_OFF; - mutex_unlock(&cd->system_lock); - - cyttsp4_start_wd_timer(cd); - - return 0; -} - -static int cyttsp4_core_wake(struct cyttsp4 *cd) -{ - int rc; - - rc = cyttsp4_request_exclusive(cd, cd->dev, - CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT); - if (rc < 0) { - dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n", - __func__, cd->exclusive_dev, cd->dev); - return 0; - } - - rc = cyttsp4_core_wake_(cd); - - if (cyttsp4_release_exclusive(cd, cd->dev) < 0) - dev_err(cd->dev, "%s: fail to release exclusive\n", __func__); - else - dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__); - - return rc; -} - -static int cyttsp4_core_suspend(struct device *dev) -{ - struct cyttsp4 *cd = dev_get_drvdata(dev); - struct cyttsp4_mt_data *md = &cd->md; - int rc; - - md->is_suspended = true; - - rc = cyttsp4_core_sleep(cd); - if (rc < 0) { - dev_err(dev, "%s: Error on sleep\n", __func__); - return -EAGAIN; - } - return 0; -} - -static int cyttsp4_core_resume(struct device *dev) -{ - struct cyttsp4 *cd = dev_get_drvdata(dev); - struct cyttsp4_mt_data *md = &cd->md; - int rc; - - md->is_suspended = false; - - rc = cyttsp4_core_wake(cd); - if (rc < 0) { - dev_err(dev, "%s: Error on wake\n", __func__); - return -EAGAIN; - } - - return 0; -} - -EXPORT_GPL_RUNTIME_DEV_PM_OPS(cyttsp4_pm_ops, - cyttsp4_core_suspend, cyttsp4_core_resume, NULL); - -static int cyttsp4_mt_open(struct input_dev *input) -{ - pm_runtime_get(input->dev.parent); - return 0; -} - -static void cyttsp4_mt_close(struct input_dev *input) -{ - struct cyttsp4_mt_data *md = input_get_drvdata(input); - mutex_lock(&md->report_lock); - if (!md->is_suspended) - pm_runtime_put(input->dev.parent); - mutex_unlock(&md->report_lock); -} - - -static int cyttsp4_setup_input_device(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - int signal = CY_IGNORE_VALUE; - int max_x, max_y, max_p, min, max; - int max_x_tmp, max_y_tmp; - int i; - int rc; - - dev_vdbg(dev, "%s: Initialize event signals\n", __func__); - __set_bit(EV_ABS, md->input->evbit); - __set_bit(EV_REL, md->input->evbit); - __set_bit(EV_KEY, md->input->evbit); - - max_x_tmp = md->si->si_ofs.max_x; - max_y_tmp = md->si->si_ofs.max_y; - - /* get maximum values from the sysinfo data */ - if (md->pdata->flags & CY_FLAG_FLIP) { - max_x = max_y_tmp - 1; - max_y = max_x_tmp - 1; - } else { - max_x = max_x_tmp - 1; - max_y = max_y_tmp - 1; - } - max_p = md->si->si_ofs.max_p; - - /* set event signal capabilities */ - for (i = 0; i < (md->pdata->frmwrk->size / CY_NUM_ABS_SET); i++) { - signal = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_SIGNAL_OST]; - if (signal != CY_IGNORE_VALUE) { - __set_bit(signal, md->input->absbit); - min = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_MIN_OST]; - max = md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_MAX_OST]; - if (i == CY_ABS_ID_OST) { - /* shift track ids down to start at 0 */ - max = max - min; - min = min - min; - } else if (i == CY_ABS_X_OST) - max = max_x; - else if (i == CY_ABS_Y_OST) - max = max_y; - else if (i == CY_ABS_P_OST) - max = max_p; - input_set_abs_params(md->input, signal, min, max, - md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_FUZZ_OST], - md->pdata->frmwrk->abs - [(i * CY_NUM_ABS_SET) + CY_FLAT_OST]); - dev_dbg(dev, "%s: register signal=%02X min=%d max=%d\n", - __func__, signal, min, max); - if ((i == CY_ABS_ID_OST) && - (md->si->si_ofs.tch_rec_size < - CY_TMA4XX_TCH_REC_SIZE)) - break; - } - } - - input_mt_init_slots(md->input, md->si->si_ofs.tch_abs[CY_TCH_T].max, - INPUT_MT_DIRECT); - rc = input_register_device(md->input); - if (rc < 0) - dev_err(dev, "%s: Error, failed register input device r=%d\n", - __func__, rc); - return rc; -} - -static int cyttsp4_mt_probe(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - struct cyttsp4_mt_data *md = &cd->md; - struct cyttsp4_mt_platform_data *pdata = cd->pdata->mt_pdata; - int rc = 0; - - mutex_init(&md->report_lock); - md->pdata = pdata; - /* Create the input device and register it. */ - dev_vdbg(dev, "%s: Create the input device and register it\n", - __func__); - md->input = input_allocate_device(); - if (md->input == NULL) { - dev_err(dev, "%s: Error, failed to allocate input device\n", - __func__); - rc = -ENOSYS; - goto error_alloc_failed; - } - - md->input->name = pdata->inp_dev_name; - scnprintf(md->phys, sizeof(md->phys)-1, "%s", dev_name(dev)); - md->input->phys = md->phys; - md->input->id.bustype = cd->bus_ops->bustype; - md->input->dev.parent = dev; - md->input->open = cyttsp4_mt_open; - md->input->close = cyttsp4_mt_close; - input_set_drvdata(md->input, md); - - /* get sysinfo */ - md->si = &cd->sysinfo; - - rc = cyttsp4_setup_input_device(cd); - if (rc) - goto error_init_input; - - return 0; - -error_init_input: - input_free_device(md->input); -error_alloc_failed: - dev_err(dev, "%s failed.\n", __func__); - return rc; -} - -struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops, - struct device *dev, u16 irq, size_t xfer_buf_size) -{ - struct cyttsp4 *cd; - struct cyttsp4_platform_data *pdata = dev_get_platdata(dev); - unsigned long irq_flags; - int rc = 0; - - if (!pdata || !pdata->core_pdata || !pdata->mt_pdata) { - dev_err(dev, "%s: Missing platform data\n", __func__); - rc = -ENODEV; - goto error_no_pdata; - } - - cd = kzalloc(sizeof(*cd), GFP_KERNEL); - if (!cd) { - dev_err(dev, "%s: Error, kzalloc\n", __func__); - rc = -ENOMEM; - goto error_alloc_data; - } - - cd->xfer_buf = kzalloc(xfer_buf_size, GFP_KERNEL); - if (!cd->xfer_buf) { - dev_err(dev, "%s: Error, kzalloc\n", __func__); - rc = -ENOMEM; - goto error_free_cd; - } - - /* Initialize device info */ - cd->dev = dev; - cd->pdata = pdata; - cd->cpdata = pdata->core_pdata; - cd->bus_ops = ops; - - /* Initialize mutexes and spinlocks */ - mutex_init(&cd->system_lock); - mutex_init(&cd->adap_lock); - - /* Initialize wait queue */ - init_waitqueue_head(&cd->wait_q); - - /* Initialize works */ - INIT_WORK(&cd->startup_work, cyttsp4_startup_work_function); - INIT_WORK(&cd->watchdog_work, cyttsp4_watchdog_work); - - /* Initialize IRQ */ - cd->irq = gpio_to_irq(cd->cpdata->irq_gpio); - if (cd->irq < 0) { - rc = -EINVAL; - goto error_free_xfer; - } - - dev_set_drvdata(dev, cd); - - /* Call platform init function */ - if (cd->cpdata->init) { - dev_dbg(cd->dev, "%s: Init HW\n", __func__); - rc = cd->cpdata->init(cd->cpdata, 1, cd->dev); - } else { - dev_dbg(cd->dev, "%s: No HW INIT function\n", __func__); - rc = 0; - } - if (rc < 0) - dev_err(cd->dev, "%s: HW Init fail r=%d\n", __func__, rc); - - dev_dbg(dev, "%s: initialize threaded irq=%d\n", __func__, cd->irq); - if (cd->cpdata->level_irq_udelay > 0) - /* use level triggered interrupts */ - irq_flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT; - else - /* use edge triggered interrupts */ - irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; - - rc = request_threaded_irq(cd->irq, NULL, cyttsp4_irq, irq_flags, - dev_name(dev), cd); - if (rc < 0) { - dev_err(dev, "%s: Error, could not request irq\n", __func__); - goto error_request_irq; - } - - /* Setup watchdog timer */ - timer_setup(&cd->watchdog_timer, cyttsp4_watchdog_timer, 0); - - /* - * call startup directly to ensure that the device - * is tested before leaving the probe - */ - rc = cyttsp4_startup(cd); - - /* Do not fail probe if startup fails but the device is detected */ - if (rc < 0 && cd->mode == CY_MODE_UNKNOWN) { - dev_err(cd->dev, "%s: Fail initial startup r=%d\n", - __func__, rc); - goto error_startup; - } - - rc = cyttsp4_mt_probe(cd); - if (rc < 0) { - dev_err(dev, "%s: Error, fail mt probe\n", __func__); - goto error_startup; - } - - pm_runtime_enable(dev); - - return cd; - -error_startup: - cancel_work_sync(&cd->startup_work); - cyttsp4_stop_wd_timer(cd); - pm_runtime_disable(dev); - cyttsp4_free_si_ptrs(cd); - free_irq(cd->irq, cd); -error_request_irq: - if (cd->cpdata->init) - cd->cpdata->init(cd->cpdata, 0, dev); -error_free_xfer: - kfree(cd->xfer_buf); -error_free_cd: - kfree(cd); -error_alloc_data: -error_no_pdata: - dev_err(dev, "%s failed.\n", __func__); - return ERR_PTR(rc); -} -EXPORT_SYMBOL_GPL(cyttsp4_probe); - -static void cyttsp4_mt_release(struct cyttsp4_mt_data *md) -{ - input_unregister_device(md->input); - input_set_drvdata(md->input, NULL); -} - -int cyttsp4_remove(struct cyttsp4 *cd) -{ - struct device *dev = cd->dev; - - cyttsp4_mt_release(&cd->md); - - /* - * Suspend the device before freeing the startup_work and stopping - * the watchdog since sleep function restarts watchdog on failure - */ - pm_runtime_suspend(dev); - pm_runtime_disable(dev); - - cancel_work_sync(&cd->startup_work); - - cyttsp4_stop_wd_timer(cd); - - free_irq(cd->irq, cd); - if (cd->cpdata->init) - cd->cpdata->init(cd->cpdata, 0, dev); - cyttsp4_free_si_ptrs(cd); - kfree(cd); - return 0; -} -EXPORT_SYMBOL_GPL(cyttsp4_remove); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen core driver"); -MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp4_core.h b/drivers/input/touchscreen/cyttsp4_core.h deleted file mode 100644 index 6262f6e45075..000000000000 --- a/drivers/input/touchscreen/cyttsp4_core.h +++ /dev/null @@ -1,448 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * cyttsp4_core.h - * Cypress TrueTouch(TM) Standard Product V4 Core driver module. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2012 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com - */ - -#ifndef _LINUX_CYTTSP4_CORE_H -#define _LINUX_CYTTSP4_CORE_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define CY_REG_BASE 0x00 - -#define CY_POST_CODEL_WDG_RST 0x01 -#define CY_POST_CODEL_CFG_DATA_CRC_FAIL 0x02 -#define CY_POST_CODEL_PANEL_TEST_FAIL 0x04 - -#define CY_NUM_BTN_PER_REG 4 - -/* touch record system information offset masks and shifts */ -#define CY_BYTE_OFS_MASK 0x1F -#define CY_BOFS_MASK 0xE0 -#define CY_BOFS_SHIFT 5 - -#define CY_TMA1036_TCH_REC_SIZE 6 -#define CY_TMA4XX_TCH_REC_SIZE 9 -#define CY_TMA1036_MAX_TCH 0x0E -#define CY_TMA4XX_MAX_TCH 0x1E - -#define CY_NORMAL_ORIGIN 0 /* upper, left corner */ -#define CY_INVERT_ORIGIN 1 /* lower, right corner */ - -/* helpers */ -#define GET_NUM_TOUCHES(x) ((x) & 0x1F) -#define IS_LARGE_AREA(x) ((x) & 0x20) -#define IS_BAD_PKT(x) ((x) & 0x20) -#define IS_BOOTLOADER(hst_mode, reset_detect) \ - ((hst_mode) & 0x01 || (reset_detect) != 0) -#define IS_TMO(t) ((t) == 0) - - -enum cyttsp_cmd_bits { - CY_CMD_COMPLETE = (1 << 6), -}; - -/* Timeout in ms. */ -#define CY_WATCHDOG_TIMEOUT 1000 - -#define CY_MAX_PRINT_SIZE 512 -#ifdef VERBOSE_DEBUG -#define CY_MAX_PRBUF_SIZE PIPE_BUF -#define CY_PR_TRUNCATED " truncated..." -#endif - -enum cyttsp4_ic_grpnum { - CY_IC_GRPNUM_RESERVED, - CY_IC_GRPNUM_CMD_REGS, - CY_IC_GRPNUM_TCH_REP, - CY_IC_GRPNUM_DATA_REC, - CY_IC_GRPNUM_TEST_REC, - CY_IC_GRPNUM_PCFG_REC, - CY_IC_GRPNUM_TCH_PARM_VAL, - CY_IC_GRPNUM_TCH_PARM_SIZE, - CY_IC_GRPNUM_RESERVED1, - CY_IC_GRPNUM_RESERVED2, - CY_IC_GRPNUM_OPCFG_REC, - CY_IC_GRPNUM_DDATA_REC, - CY_IC_GRPNUM_MDATA_REC, - CY_IC_GRPNUM_TEST_REGS, - CY_IC_GRPNUM_BTN_KEYS, - CY_IC_GRPNUM_TTHE_REGS, - CY_IC_GRPNUM_NUM -}; - -enum cyttsp4_int_state { - CY_INT_NONE, - CY_INT_IGNORE = (1 << 0), - CY_INT_MODE_CHANGE = (1 << 1), - CY_INT_EXEC_CMD = (1 << 2), - CY_INT_AWAKE = (1 << 3), -}; - -enum cyttsp4_mode { - CY_MODE_UNKNOWN, - CY_MODE_BOOTLOADER = (1 << 1), - CY_MODE_OPERATIONAL = (1 << 2), - CY_MODE_SYSINFO = (1 << 3), - CY_MODE_CAT = (1 << 4), - CY_MODE_STARTUP = (1 << 5), - CY_MODE_LOADER = (1 << 6), - CY_MODE_CHANGE_MODE = (1 << 7), - CY_MODE_CHANGED = (1 << 8), - CY_MODE_CMD_COMPLETE = (1 << 9), -}; - -enum cyttsp4_sleep_state { - SS_SLEEP_OFF, - SS_SLEEP_ON, - SS_SLEEPING, - SS_WAKING, -}; - -enum cyttsp4_startup_state { - STARTUP_NONE, - STARTUP_QUEUED, - STARTUP_RUNNING, -}; - -#define CY_NUM_REVCTRL 8 -struct cyttsp4_cydata { - u8 ttpidh; - u8 ttpidl; - u8 fw_ver_major; - u8 fw_ver_minor; - u8 revctrl[CY_NUM_REVCTRL]; - u8 blver_major; - u8 blver_minor; - u8 jtag_si_id3; - u8 jtag_si_id2; - u8 jtag_si_id1; - u8 jtag_si_id0; - u8 mfgid_sz; - u8 cyito_idh; - u8 cyito_idl; - u8 cyito_verh; - u8 cyito_verl; - u8 ttsp_ver_major; - u8 ttsp_ver_minor; - u8 device_info; - u8 mfg_id[]; -} __packed; - -struct cyttsp4_test { - u8 post_codeh; - u8 post_codel; -} __packed; - -struct cyttsp4_pcfg { - u8 electrodes_x; - u8 electrodes_y; - u8 len_xh; - u8 len_xl; - u8 len_yh; - u8 len_yl; - u8 res_xh; - u8 res_xl; - u8 res_yh; - u8 res_yl; - u8 max_zh; - u8 max_zl; - u8 panel_info0; -} __packed; - -struct cyttsp4_tch_rec_params { - u8 loc; - u8 size; -} __packed; - -#define CY_NUM_TCH_FIELDS 7 -#define CY_NUM_EXT_TCH_FIELDS 3 -struct cyttsp4_opcfg { - u8 cmd_ofs; - u8 rep_ofs; - u8 rep_szh; - u8 rep_szl; - u8 num_btns; - u8 tt_stat_ofs; - u8 obj_cfg0; - u8 max_tchs; - u8 tch_rec_size; - struct cyttsp4_tch_rec_params tch_rec_old[CY_NUM_TCH_FIELDS]; - u8 btn_rec_size; /* btn record size (in bytes) */ - u8 btn_diff_ofs; /* btn data loc, diff counts */ - u8 btn_diff_size; /* btn size of diff counts (in bits) */ - struct cyttsp4_tch_rec_params tch_rec_new[CY_NUM_EXT_TCH_FIELDS]; -} __packed; - -struct cyttsp4_sysinfo_ptr { - struct cyttsp4_cydata *cydata; - struct cyttsp4_test *test; - struct cyttsp4_pcfg *pcfg; - struct cyttsp4_opcfg *opcfg; - struct cyttsp4_ddata *ddata; - struct cyttsp4_mdata *mdata; -} __packed; - -struct cyttsp4_sysinfo_data { - u8 hst_mode; - u8 reserved; - u8 map_szh; - u8 map_szl; - u8 cydata_ofsh; - u8 cydata_ofsl; - u8 test_ofsh; - u8 test_ofsl; - u8 pcfg_ofsh; - u8 pcfg_ofsl; - u8 opcfg_ofsh; - u8 opcfg_ofsl; - u8 ddata_ofsh; - u8 ddata_ofsl; - u8 mdata_ofsh; - u8 mdata_ofsl; -} __packed; - -enum cyttsp4_tch_abs { /* for ordering within the extracted touch data array */ - CY_TCH_X, /* X */ - CY_TCH_Y, /* Y */ - CY_TCH_P, /* P (Z) */ - CY_TCH_T, /* TOUCH ID */ - CY_TCH_E, /* EVENT ID */ - CY_TCH_O, /* OBJECT ID */ - CY_TCH_W, /* SIZE */ - CY_TCH_MAJ, /* TOUCH_MAJOR */ - CY_TCH_MIN, /* TOUCH_MINOR */ - CY_TCH_OR, /* ORIENTATION */ - CY_TCH_NUM_ABS -}; - -struct cyttsp4_touch { - int abs[CY_TCH_NUM_ABS]; -}; - -struct cyttsp4_tch_abs_params { - size_t ofs; /* abs byte offset */ - size_t size; /* size in bits */ - size_t max; /* max value */ - size_t bofs; /* bit offset */ -}; - -struct cyttsp4_sysinfo_ofs { - size_t chip_type; - size_t cmd_ofs; - size_t rep_ofs; - size_t rep_sz; - size_t num_btns; - size_t num_btn_regs; /* ceil(num_btns/4) */ - size_t tt_stat_ofs; - size_t tch_rec_size; - size_t obj_cfg0; - size_t max_tchs; - size_t mode_size; - size_t data_size; - size_t map_sz; - size_t max_x; - size_t x_origin; /* left or right corner */ - size_t max_y; - size_t y_origin; /* upper or lower corner */ - size_t max_p; - size_t cydata_ofs; - size_t test_ofs; - size_t pcfg_ofs; - size_t opcfg_ofs; - size_t ddata_ofs; - size_t mdata_ofs; - size_t cydata_size; - size_t test_size; - size_t pcfg_size; - size_t opcfg_size; - size_t ddata_size; - size_t mdata_size; - size_t btn_keys_size; - struct cyttsp4_tch_abs_params tch_abs[CY_TCH_NUM_ABS]; - size_t btn_rec_size; /* btn record size (in bytes) */ - size_t btn_diff_ofs;/* btn data loc ,diff counts, (Op-Mode byte ofs) */ - size_t btn_diff_size;/* btn size of diff counts (in bits) */ -}; - -enum cyttsp4_btn_state { - CY_BTN_RELEASED, - CY_BTN_PRESSED, - CY_BTN_NUM_STATE -}; - -struct cyttsp4_btn { - bool enabled; - int state; /* CY_BTN_PRESSED, CY_BTN_RELEASED */ - int key_code; -}; - -struct cyttsp4_sysinfo { - bool ready; - struct cyttsp4_sysinfo_data si_data; - struct cyttsp4_sysinfo_ptr si_ptrs; - struct cyttsp4_sysinfo_ofs si_ofs; - struct cyttsp4_btn *btn; /* button states */ - u8 *btn_rec_data; /* button diff count data */ - u8 *xy_mode; /* operational mode and status regs */ - u8 *xy_data; /* operational touch regs */ -}; - -struct cyttsp4_mt_data { - struct cyttsp4_mt_platform_data *pdata; - struct cyttsp4_sysinfo *si; - struct input_dev *input; - struct mutex report_lock; - bool is_suspended; - char phys[NAME_MAX]; - int num_prv_tch; -}; - -struct cyttsp4 { - struct device *dev; - struct mutex system_lock; - struct mutex adap_lock; - enum cyttsp4_mode mode; - enum cyttsp4_sleep_state sleep_state; - enum cyttsp4_startup_state startup_state; - int int_status; - wait_queue_head_t wait_q; - int irq; - struct work_struct startup_work; - struct work_struct watchdog_work; - struct timer_list watchdog_timer; - struct cyttsp4_sysinfo sysinfo; - void *exclusive_dev; - int exclusive_waits; - atomic_t ignore_irq; - bool invalid_touch_app; - struct cyttsp4_mt_data md; - struct cyttsp4_platform_data *pdata; - struct cyttsp4_core_platform_data *cpdata; - const struct cyttsp4_bus_ops *bus_ops; - u8 *xfer_buf; -#ifdef VERBOSE_DEBUG - u8 pr_buf[CY_MAX_PRBUF_SIZE]; -#endif -}; - -struct cyttsp4_bus_ops { - u16 bustype; - int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, - const void *values); - int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, - void *values); -}; - -enum cyttsp4_hst_mode_bits { - CY_HST_TOGGLE = (1 << 7), - CY_HST_MODE_CHANGE = (1 << 3), - CY_HST_MODE = (7 << 4), - CY_HST_OPERATE = (0 << 4), - CY_HST_SYSINFO = (1 << 4), - CY_HST_CAT = (2 << 4), - CY_HST_LOWPOW = (1 << 2), - CY_HST_SLEEP = (1 << 1), - CY_HST_RESET = (1 << 0), -}; - -/* abs settings */ -#define CY_IGNORE_VALUE 0xFFFF - -/* abs signal capabilities offsets in the frameworks array */ -enum cyttsp4_sig_caps { - CY_SIGNAL_OST, - CY_MIN_OST, - CY_MAX_OST, - CY_FUZZ_OST, - CY_FLAT_OST, - CY_NUM_ABS_SET /* number of signal capability fields */ -}; - -/* abs axis signal offsets in the framworks array */ -enum cyttsp4_sig_ost { - CY_ABS_X_OST, - CY_ABS_Y_OST, - CY_ABS_P_OST, - CY_ABS_W_OST, - CY_ABS_ID_OST, - CY_ABS_MAJ_OST, - CY_ABS_MIN_OST, - CY_ABS_OR_OST, - CY_NUM_ABS_OST /* number of abs signals */ -}; - -enum cyttsp4_flags { - CY_FLAG_NONE = 0x00, - CY_FLAG_HOVER = 0x04, - CY_FLAG_FLIP = 0x08, - CY_FLAG_INV_X = 0x10, - CY_FLAG_INV_Y = 0x20, - CY_FLAG_VKEYS = 0x40, -}; - -enum cyttsp4_object_id { - CY_OBJ_STANDARD_FINGER, - CY_OBJ_LARGE_OBJECT, - CY_OBJ_STYLUS, - CY_OBJ_HOVER, -}; - -enum cyttsp4_event_id { - CY_EV_NO_EVENT, - CY_EV_TOUCHDOWN, - CY_EV_MOVE, /* significant displacement (> act dist) */ - CY_EV_LIFTOFF, /* record reports last position */ -}; - -/* x-axis resolution of panel in pixels */ -#define CY_PCFG_RESOLUTION_X_MASK 0x7F - -/* y-axis resolution of panel in pixels */ -#define CY_PCFG_RESOLUTION_Y_MASK 0x7F - -/* x-axis, 0:origin is on left side of panel, 1: right */ -#define CY_PCFG_ORIGIN_X_MASK 0x80 - -/* y-axis, 0:origin is on top side of panel, 1: bottom */ -#define CY_PCFG_ORIGIN_Y_MASK 0x80 - -static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u16 addr, int size, - void *buf) -{ - return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf); -} - -static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u16 addr, int size, - const void *buf) -{ - return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf); -} - -extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops, - struct device *dev, u16 irq, size_t xfer_buf_size); -extern int cyttsp4_remove(struct cyttsp4 *ts); -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, const void *values); -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, void *values); -extern const struct dev_pm_ops cyttsp4_pm_ops; - -#endif /* _LINUX_CYTTSP4_CORE_H */ diff --git a/drivers/input/touchscreen/cyttsp4_i2c.c b/drivers/input/touchscreen/cyttsp4_i2c.c deleted file mode 100644 index da32c151def5..000000000000 --- a/drivers/input/touchscreen/cyttsp4_i2c.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp_i2c.c - * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas - * Copyright (C) 2013 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com - */ - -#include "cyttsp4_core.h" - -#include -#include - -#define CYTTSP4_I2C_DATA_SIZE (3 * 256) - -static const struct cyttsp4_bus_ops cyttsp4_i2c_bus_ops = { - .bustype = BUS_I2C, - .write = cyttsp_i2c_write_block_data, - .read = cyttsp_i2c_read_block_data, -}; - -static int cyttsp4_i2c_probe(struct i2c_client *client) -{ - struct cyttsp4 *ts; - - if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, "I2C functionality not Supported\n"); - return -EIO; - } - - ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq, - CYTTSP4_I2C_DATA_SIZE); - - return PTR_ERR_OR_ZERO(ts); -} - -static void cyttsp4_i2c_remove(struct i2c_client *client) -{ - struct cyttsp4 *ts = i2c_get_clientdata(client); - - cyttsp4_remove(ts); -} - -static const struct i2c_device_id cyttsp4_i2c_id[] = { - { CYTTSP4_I2C_NAME }, - { } -}; -MODULE_DEVICE_TABLE(i2c, cyttsp4_i2c_id); - -static struct i2c_driver cyttsp4_i2c_driver = { - .driver = { - .name = CYTTSP4_I2C_NAME, - .pm = pm_ptr(&cyttsp4_pm_ops), - }, - .probe = cyttsp4_i2c_probe, - .remove = cyttsp4_i2c_remove, - .id_table = cyttsp4_i2c_id, -}; - -module_i2c_driver(cyttsp4_i2c_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); -MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c deleted file mode 100644 index 944fbbe9113e..000000000000 --- a/drivers/input/touchscreen/cyttsp4_spi.c +++ /dev/null @@ -1,187 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Source for: - * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. - * For use with Cypress Txx4xx parts. - * Supported parts include: - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas - * Copyright (C) 2013 Cypress Semiconductor - * - * Contact Cypress Semiconductor at www.cypress.com - */ - -#include "cyttsp4_core.h" - -#include -#include -#include - -#define CY_SPI_WR_OP 0x00 /* r/~w */ -#define CY_SPI_RD_OP 0x01 -#define CY_SPI_BITS_PER_WORD 8 -#define CY_SPI_A8_BIT 0x02 -#define CY_SPI_WR_HEADER_BYTES 2 -#define CY_SPI_RD_HEADER_BYTES 1 -#define CY_SPI_CMD_BYTES 2 -#define CY_SPI_SYNC_BYTE 0 -#define CY_SPI_SYNC_ACK 0x62 /* from TRM *A protocol */ -#define CY_SPI_DATA_SIZE (2 * 256) - -#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) - -static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf, - u8 op, u16 reg, u8 *buf, int length) -{ - struct spi_device *spi = to_spi_device(dev); - struct spi_message msg; - struct spi_transfer xfer[2]; - u8 *wr_buf = &xfer_buf[0]; - u8 rd_buf[CY_SPI_CMD_BYTES]; - int retval; - int i; - - if (length > CY_SPI_DATA_SIZE) { - dev_err(dev, "%s: length %d is too big.\n", - __func__, length); - return -EINVAL; - } - - memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); - memset(rd_buf, 0, CY_SPI_CMD_BYTES); - - wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0); - if (op == CY_SPI_WR_OP) { - wr_buf[1] = reg & 0xFF; - if (length > 0) - memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); - } - - memset(xfer, 0, sizeof(xfer)); - spi_message_init(&msg); - - /* - We set both TX and RX buffers because Cypress TTSP - requires full duplex operation. - */ - xfer[0].tx_buf = wr_buf; - xfer[0].rx_buf = rd_buf; - switch (op) { - case CY_SPI_WR_OP: - xfer[0].len = length + CY_SPI_CMD_BYTES; - spi_message_add_tail(&xfer[0], &msg); - break; - - case CY_SPI_RD_OP: - xfer[0].len = CY_SPI_RD_HEADER_BYTES; - spi_message_add_tail(&xfer[0], &msg); - - xfer[1].rx_buf = buf; - xfer[1].len = length; - spi_message_add_tail(&xfer[1], &msg); - break; - - default: - dev_err(dev, "%s: bad operation code=%d\n", __func__, op); - return -EINVAL; - } - - retval = spi_sync(spi, &msg); - if (retval < 0) { - dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n", - __func__, retval, xfer[1].len, op); - - /* - * do not return here since was a bad ACK sequence - * let the following ACK check handle any errors and - * allow silent retries - */ - } - - if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) { - dev_dbg(dev, "%s: operation %d failed\n", __func__, op); - - for (i = 0; i < CY_SPI_CMD_BYTES; i++) - dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n", - __func__, i, rd_buf[i]); - for (i = 0; i < length; i++) - dev_dbg(dev, "%s: test buf[%d]:0x%02x\n", - __func__, i, buf[i]); - - return -EIO; - } - - return 0; -} - -static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, void *data) -{ - int rc; - - rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0); - if (rc) - return rc; - else - return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data, - length); -} - -static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, const void *data) -{ - return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data, - length); -} - -static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = { - .bustype = BUS_SPI, - .write = cyttsp_spi_write_block_data, - .read = cyttsp_spi_read_block_data, -}; - -static int cyttsp4_spi_probe(struct spi_device *spi) -{ - struct cyttsp4 *ts; - int error; - - /* Set up SPI*/ - spi->bits_per_word = CY_SPI_BITS_PER_WORD; - spi->mode = SPI_MODE_0; - error = spi_setup(spi); - if (error < 0) { - dev_err(&spi->dev, "%s: SPI setup error %d\n", - __func__, error); - return error; - } - - ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, - CY_SPI_DATA_BUF_SIZE); - - return PTR_ERR_OR_ZERO(ts); -} - -static void cyttsp4_spi_remove(struct spi_device *spi) -{ - struct cyttsp4 *ts = spi_get_drvdata(spi); - cyttsp4_remove(ts); -} - -static struct spi_driver cyttsp4_spi_driver = { - .driver = { - .name = CYTTSP4_SPI_NAME, - .pm = pm_ptr(&cyttsp4_pm_ops), - }, - .probe = cyttsp4_spi_probe, - .remove = cyttsp4_spi_remove, -}; - -module_spi_driver(cyttsp4_spi_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); -MODULE_AUTHOR("Cypress"); -MODULE_ALIAS("spi:cyttsp4"); diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h index cd3b80401970..40a605d20285 100644 --- a/drivers/input/touchscreen/cyttsp_core.h +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -136,10 +136,6 @@ struct cyttsp { struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, struct device *dev, int irq, size_t xfer_buf_size); -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, const void *values); -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr, - u8 length, void *values); extern const struct dev_pm_ops cyttsp_pm_ops; #endif /* __CYTTSP_CORE_H__ */ diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c index bf13b3448a6b..cb15600549cd 100644 --- a/drivers/input/touchscreen/cyttsp_i2c.c +++ b/drivers/input/touchscreen/cyttsp_i2c.c @@ -22,6 +22,61 @@ #define CY_I2C_DATA_SIZE 128 +static int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, + u16 addr, u8 length, void *values) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 client_addr = client->addr | ((addr >> 8) & 0x1); + u8 addr_lo = addr & 0xFF; + struct i2c_msg msgs[] = { + { + .addr = client_addr, + .flags = 0, + .len = 1, + .buf = &addr_lo, + }, + { + .addr = client_addr, + .flags = I2C_M_RD, + .len = length, + .buf = values, + }, + }; + int retval; + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + +static int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, + u16 addr, u8 length, const void *values) +{ + struct i2c_client *client = to_i2c_client(dev); + u8 client_addr = client->addr | ((addr >> 8) & 0x1); + u8 addr_lo = addr & 0xFF; + struct i2c_msg msgs[] = { + { + .addr = client_addr, + .flags = 0, + .len = length + 1, + .buf = xfer_buf, + }, + }; + int retval; + + xfer_buf[0] = addr_lo; + memcpy(&xfer_buf[1], values, length); + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = { .bustype = BUS_I2C, .write = cyttsp_i2c_write_block_data, diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c deleted file mode 100644 index 7e752fb9fad7..000000000000 --- a/drivers/input/touchscreen/cyttsp_i2c_common.c +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * cyttsp_i2c_common.c - * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. - * For use with Cypress Txx3xx and Txx4xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * TMA4XX - * TMA1036 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas - * - * Contact Cypress Semiconductor at www.cypress.com - */ - -#include -#include -#include -#include -#include - -#include "cyttsp4_core.h" - -int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, void *values) -{ - struct i2c_client *client = to_i2c_client(dev); - u8 client_addr = client->addr | ((addr >> 8) & 0x1); - u8 addr_lo = addr & 0xFF; - struct i2c_msg msgs[] = { - { - .addr = client_addr, - .flags = 0, - .len = 1, - .buf = &addr_lo, - }, - { - .addr = client_addr, - .flags = I2C_M_RD, - .len = length, - .buf = values, - }, - }; - int retval; - - retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (retval < 0) - return retval; - - return retval != ARRAY_SIZE(msgs) ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data); - -int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, - u16 addr, u8 length, const void *values) -{ - struct i2c_client *client = to_i2c_client(dev); - u8 client_addr = client->addr | ((addr >> 8) & 0x1); - u8 addr_lo = addr & 0xFF; - struct i2c_msg msgs[] = { - { - .addr = client_addr, - .flags = 0, - .len = length + 1, - .buf = xfer_buf, - }, - }; - int retval; - - xfer_buf[0] = addr_lo; - memcpy(&xfer_buf[1], values, length); - - retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (retval < 0) - return retval; - - return retval != ARRAY_SIZE(msgs) ? -EIO : 0; -} -EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data); - - -MODULE_DESCRIPTION("Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Cypress"); diff --git a/include/linux/platform_data/cyttsp4.h b/include/linux/platform_data/cyttsp4.h deleted file mode 100644 index 5dc9d2be384b..000000000000 --- a/include/linux/platform_data/cyttsp4.h +++ /dev/null @@ -1,62 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Header file for: - * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. - * For use with Cypress Txx3xx parts. - * Supported parts include: - * CY8CTST341 - * CY8CTMA340 - * - * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. - * Copyright (C) 2012 Javier Martinez Canillas - * - * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) - */ -#ifndef _CYTTSP4_H_ -#define _CYTTSP4_H_ - -#define CYTTSP4_MT_NAME "cyttsp4_mt" -#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" -#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" - -#define CY_TOUCH_SETTINGS_MAX 32 - -struct touch_framework { - const uint16_t *abs; - uint8_t size; - uint8_t enable_vkeys; -} __packed; - -struct cyttsp4_mt_platform_data { - struct touch_framework *frmwrk; - unsigned short flags; - char const *inp_dev_name; -}; - -struct touch_settings { - const uint8_t *data; - uint32_t size; - uint8_t tag; -} __packed; - -struct cyttsp4_core_platform_data { - int irq_gpio; - int rst_gpio; - int level_irq_udelay; - int (*xres)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - int (*init)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev); - int (*power)(struct cyttsp4_core_platform_data *pdata, - int on, struct device *dev, atomic_t *ignore_irq); - int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, - struct device *dev); - struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; -}; - -struct cyttsp4_platform_data { - struct cyttsp4_core_platform_data *core_pdata; - struct cyttsp4_mt_platform_data *mt_pdata; -}; - -#endif /* _CYTTSP4_H_ */ -- cgit v1.2.3 From 8c38617722bdf57a90e6c77ed9ee5ebb60958d2a Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 9 Aug 2024 16:15:54 +0200 Subject: memory: ti-aemif: remove platform data support There are no longer any users of the ti-aemif driver that set up platform data from board files. We can shrink the driver by removing support for it. Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20240809-ti-aemif-v1-1-27b1e5001390@linaro.org Signed-off-by: Krzysztof Kozlowski --- drivers/memory/ti-aemif.c | 25 +------------------ include/linux/platform_data/ti-aemif.h | 45 ---------------------------------- 2 files changed, 1 insertion(+), 69 deletions(-) delete mode 100644 include/linux/platform_data/ti-aemif.h (limited to 'include/linux/platform_data') diff --git a/drivers/memory/ti-aemif.c b/drivers/memory/ti-aemif.c index e192db9e0e4b..b92cab455cbb 100644 --- a/drivers/memory/ti-aemif.c +++ b/drivers/memory/ti-aemif.c @@ -17,7 +17,6 @@ #include #include #include -#include #define TA_SHIFT 2 #define RHOLD_SHIFT 4 @@ -332,16 +331,11 @@ static int aemif_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct device_node *child_np; struct aemif_device *aemif; - struct aemif_platform_data *pdata; - struct of_dev_auxdata *dev_lookup; aemif = devm_kzalloc(dev, sizeof(*aemif), GFP_KERNEL); if (!aemif) return -ENOMEM; - pdata = dev_get_platdata(&pdev->dev); - dev_lookup = pdata ? pdata->dev_lookup : NULL; - platform_set_drvdata(pdev, aemif); aemif->clk = devm_clk_get(dev, NULL); @@ -358,8 +352,6 @@ static int aemif_probe(struct platform_device *pdev) if (np && of_device_is_compatible(np, "ti,da850-aemif")) aemif->cs_offset = 2; - else if (pdata) - aemif->cs_offset = pdata->cs_offset; aemif->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(aemif->base)) { @@ -381,11 +373,6 @@ static int aemif_probe(struct platform_device *pdev) goto error; } } - } else if (pdata && pdata->num_abus_data > 0) { - for (i = 0; i < pdata->num_abus_data; i++, aemif->num_cs++) { - aemif->cs_data[i].cs = pdata->abus_data[i].cs; - aemif_get_hw_params(pdev, i); - } } for (i = 0; i < aemif->num_cs; i++) { @@ -403,22 +390,12 @@ static int aemif_probe(struct platform_device *pdev) */ if (np) { for_each_available_child_of_node(np, child_np) { - ret = of_platform_populate(child_np, NULL, - dev_lookup, dev); + ret = of_platform_populate(child_np, NULL, NULL, dev); if (ret < 0) { of_node_put(child_np); goto error; } } - } else if (pdata) { - for (i = 0; i < pdata->num_sub_devices; i++) { - pdata->sub_devices[i].dev.parent = dev; - ret = platform_device_register(&pdata->sub_devices[i]); - if (ret) { - dev_warn(dev, "Error register sub device %s\n", - pdata->sub_devices[i].name); - } - } } return 0; diff --git a/include/linux/platform_data/ti-aemif.h b/include/linux/platform_data/ti-aemif.h deleted file mode 100644 index 77625251df07..000000000000 --- a/include/linux/platform_data/ti-aemif.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * TI DaVinci AEMIF platform glue. - * - * Copyright (C) 2017 BayLibre SAS - * - * Author: - * Bartosz Golaszewski - */ - -#ifndef __TI_DAVINCI_AEMIF_DATA_H__ -#define __TI_DAVINCI_AEMIF_DATA_H__ - -#include - -/** - * struct aemif_abus_data - Async bus configuration parameters. - * - * @cs - Chip-select number. - */ -struct aemif_abus_data { - u32 cs; -}; - -/** - * struct aemif_platform_data - Data to set up the TI aemif driver. - * - * @dev_lookup: of_dev_auxdata passed to of_platform_populate() for aemif - * subdevices. - * @cs_offset: Lowest allowed chip-select number. - * @abus_data: Array of async bus configuration entries. - * @num_abus_data: Number of abus entries. - * @sub_devices: Array of platform subdevices. - * @num_sub_devices: Number of subdevices. - */ -struct aemif_platform_data { - struct of_dev_auxdata *dev_lookup; - u32 cs_offset; - struct aemif_abus_data *abus_data; - size_t num_abus_data; - struct platform_device *sub_devices; - size_t num_sub_devices; -}; - -#endif /* __TI_DAVINCI_AEMIF_DATA_H__ */ -- cgit v1.2.3 From 6c65914a40d33e96ceedc757be0129139cdf7852 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 16 Aug 2024 11:54:23 -0700 Subject: Input: keypad-nomadik-ske - remove the driver The users of this driver were removed in 2013 in commit 28633c54bda6 ("ARM: ux500: Rip out keypad initialisation which is no longer used"). Remove the driver as well. Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/Zr-gX0dfN4te_8VG@google.com Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 11 - drivers/input/keyboard/Makefile | 1 - drivers/input/keyboard/nomadik-ske-keypad.c | 378 ----------------------- include/linux/platform_data/keypad-nomadik-ske.h | 50 --- 4 files changed, 440 deletions(-) delete mode 100644 drivers/input/keyboard/nomadik-ske-keypad.c delete mode 100644 include/linux/platform_data/keypad-nomadik-ske.h (limited to 'include/linux/platform_data') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 72f9552cb571..a5015d6f8bed 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -473,17 +473,6 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. -config KEYBOARD_NOMADIK - tristate "ST-Ericsson Nomadik SKE keyboard" - depends on (ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST) - select INPUT_MATRIXKMAP - help - Say Y here if you want to use a keypad provided on the SKE controller - used on the Ux500 and Nomadik platforms - - To compile this driver as a module, choose M here: the - module will be called nmk-ske-keypad. - config KEYBOARD_NSPIRE tristate "TI-NSPIRE built-in keyboard" depends on ARCH_NSPIRE && OF diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index b8d12a0524e0..3631a9294c6f 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o obj-$(CONFIG_KEYBOARD_MT6779) += mt6779-keypad.o obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o -obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c deleted file mode 100644 index b3ccc97f61e1..000000000000 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ /dev/null @@ -1,378 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar G for ST-Ericsson - * Author: Sundar Iyer for ST-Ericsson - * - * Keypad controller driver for the SKE (Scroll Key Encoder) module used in - * the Nomadik 8815 and Ux500 platforms. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* SKE_CR bits */ -#define SKE_KPMLT (0x1 << 6) -#define SKE_KPCN (0x7 << 3) -#define SKE_KPASEN (0x1 << 2) -#define SKE_KPASON (0x1 << 7) - -/* SKE_IMSC bits */ -#define SKE_KPIMA (0x1 << 2) - -/* SKE_ICR bits */ -#define SKE_KPICS (0x1 << 3) -#define SKE_KPICA (0x1 << 2) - -/* SKE_RIS bits */ -#define SKE_KPRISA (0x1 << 2) - -#define SKE_KEYPAD_ROW_SHIFT 3 -#define SKE_KPD_NUM_ROWS 8 -#define SKE_KPD_NUM_COLS 8 - -/* keypad auto scan registers */ -#define SKE_ASR0 0x20 -#define SKE_ASR1 0x24 -#define SKE_ASR2 0x28 -#define SKE_ASR3 0x2C - -#define SKE_NUM_ASRX_REGISTERS (4) -#define KEY_PRESSED_DELAY 10 - -/** - * struct ske_keypad - data structure used by keypad driver - * @irq: irq no - * @reg_base: ske registers base address - * @input: pointer to input device object - * @board: keypad platform device - * @keymap: matrix scan code table for keycodes - * @clk: clock structure pointer - * @pclk: clock structure pointer - * @ske_keypad_lock: spinlock protecting the keypad read/writes - */ -struct ske_keypad { - int irq; - void __iomem *reg_base; - struct input_dev *input; - const struct ske_keypad_platform_data *board; - unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS]; - struct clk *clk; - struct clk *pclk; - spinlock_t ske_keypad_lock; -}; - -static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, - u8 mask, u8 data) -{ - u32 ret; - - spin_lock(&keypad->ske_keypad_lock); - - ret = readl(keypad->reg_base + addr); - ret &= ~mask; - ret |= data; - writel(ret, keypad->reg_base + addr); - - spin_unlock(&keypad->ske_keypad_lock); -} - -/* - * ske_keypad_chip_init: init keypad controller configuration - * - * Enable Multi key press detection, auto scan mode - */ -static int __init ske_keypad_chip_init(struct ske_keypad *keypad) -{ - u32 value; - int timeout = keypad->board->debounce_ms; - - /* check SKE_RIS to be 0 */ - while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--) - cpu_relax(); - - if (timeout == -1) - return -EINVAL; - - /* - * set debounce value - * keypad dbounce is configured in DBCR[15:8] - * dbounce value in steps of 32/32.768 ms - */ - spin_lock(&keypad->ske_keypad_lock); - value = readl(keypad->reg_base + SKE_DBCR); - value = value & 0xff; - value |= ((keypad->board->debounce_ms * 32000)/32768) << 8; - writel(value, keypad->reg_base + SKE_DBCR); - spin_unlock(&keypad->ske_keypad_lock); - - /* enable multi key detection */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT); - - /* - * set up the number of columns - * KPCN[5:3] defines no. of keypad columns to be auto scanned - */ - value = (keypad->board->kcol - 1) << 3; - ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value); - - /* clear keypad interrupt for auto(and pending SW) scans */ - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS); - - /* un-mask keypad interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - /* enable automatic scan */ - ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN); - - return 0; -} - -static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col) -{ - int row = 0, code, pos; - struct input_dev *input = keypad->input; - u32 ske_ris; - int key_pressed; - int num_of_rows; - - /* find out the row */ - num_of_rows = hweight8(status); - do { - pos = __ffs(status); - row = pos; - status &= ~(1 << pos); - - code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT); - ske_ris = readl(keypad->reg_base + SKE_RIS); - key_pressed = ske_ris & SKE_KPRISA; - - input_event(input, EV_MSC, MSC_SCAN, code); - input_report_key(input, keypad->keymap[code], key_pressed); - input_sync(input); - num_of_rows--; - } while (num_of_rows); -} - -static void ske_keypad_read_data(struct ske_keypad *keypad) -{ - u8 status; - int col = 0; - int ske_asr, i; - - /* - * Read the auto scan registers - * - * Each SKE_ASRx (x=0 to x=3) contains two row values. - * lower byte contains row value for column 2*x, - * upper byte contains row value for column 2*x + 1 - */ - for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) { - ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i)); - if (!ske_asr) - continue; - - /* now that ASRx is zero, find out the coloumn x and row y */ - status = ske_asr & 0xff; - if (status) { - col = i * 2; - ske_keypad_report(keypad, status, col); - } - status = (ske_asr & 0xff00) >> 8; - if (status) { - col = (i * 2) + 1; - ske_keypad_report(keypad, status, col); - } - } -} - -static irqreturn_t ske_keypad_irq(int irq, void *dev_id) -{ - struct ske_keypad *keypad = dev_id; - int timeout = keypad->board->debounce_ms; - - /* disable auto scan interrupt; mask the interrupt generated */ - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA); - - while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout) - cpu_relax(); - - /* SKEx registers are stable and can be read */ - ske_keypad_read_data(keypad); - - /* wait until raw interrupt is clear */ - while ((readl(keypad->reg_base + SKE_RIS)) && --timeout) - msleep(KEY_PRESSED_DELAY); - - /* enable auto scan interrupts */ - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return IRQ_HANDLED; -} - -static void ske_keypad_board_exit(void *data) -{ - struct ske_keypad *keypad = data; - - keypad->board->exit(); -} - -static int __init ske_keypad_probe(struct platform_device *pdev) -{ - const struct ske_keypad_platform_data *plat = - dev_get_platdata(&pdev->dev); - struct device *dev = &pdev->dev; - struct ske_keypad *keypad; - struct input_dev *input; - int irq; - int error; - - if (!plat) { - dev_err(&pdev->dev, "invalid keypad platform data\n"); - return -EINVAL; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - keypad = devm_kzalloc(dev, sizeof(struct ske_keypad), - GFP_KERNEL); - input = devm_input_allocate_device(dev); - if (!keypad || !input) { - dev_err(&pdev->dev, "failed to allocate keypad memory\n"); - return -ENOMEM; - } - - keypad->irq = irq; - keypad->board = plat; - keypad->input = input; - spin_lock_init(&keypad->ske_keypad_lock); - - keypad->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(keypad->reg_base)) - return PTR_ERR(keypad->reg_base); - - keypad->pclk = devm_clk_get_enabled(dev, "apb_pclk"); - if (IS_ERR(keypad->pclk)) { - dev_err(&pdev->dev, "failed to get pclk\n"); - return PTR_ERR(keypad->pclk); - } - - keypad->clk = devm_clk_get_enabled(dev, NULL); - if (IS_ERR(keypad->clk)) { - dev_err(&pdev->dev, "failed to get clk\n"); - return PTR_ERR(keypad->clk); - } - - input->id.bustype = BUS_HOST; - input->name = "ux500-ske-keypad"; - input->dev.parent = &pdev->dev; - - error = matrix_keypad_build_keymap(plat->keymap_data, NULL, - SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS, - keypad->keymap, input); - if (error) { - dev_err(&pdev->dev, "Failed to build keymap\n"); - return error; - } - - input_set_capability(input, EV_MSC, MSC_SCAN); - if (!plat->no_autorepeat) - __set_bit(EV_REP, input->evbit); - - /* go through board initialization helpers */ - if (keypad->board->init) - keypad->board->init(); - - if (keypad->board->exit) { - error = devm_add_action_or_reset(dev, ske_keypad_board_exit, - keypad); - if (error) - return error; - } - - error = ske_keypad_chip_init(keypad); - if (error) { - dev_err(&pdev->dev, "unable to init keypad hardware\n"); - return error; - } - - error = devm_request_threaded_irq(dev, keypad->irq, - NULL, ske_keypad_irq, - IRQF_ONESHOT, "ske-keypad", keypad); - if (error) { - dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq); - return error; - } - - error = input_register_device(input); - if (error) { - dev_err(&pdev->dev, - "unable to register input device: %d\n", error); - return error; - } - - if (plat->wakeup_enable) - device_init_wakeup(&pdev->dev, true); - - platform_set_drvdata(pdev, keypad); - - return 0; -} - -static int ske_keypad_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - enable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0); - - return 0; -} - -static int ske_keypad_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct ske_keypad *keypad = platform_get_drvdata(pdev); - int irq = platform_get_irq(pdev, 0); - - if (device_may_wakeup(dev)) - disable_irq_wake(irq); - else - ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA); - - return 0; -} - -static DEFINE_SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, - ske_keypad_suspend, ske_keypad_resume); - -static struct platform_driver ske_keypad_driver = { - .driver = { - .name = "nmk-ske-keypad", - .pm = pm_sleep_ptr(&ske_keypad_dev_pm_ops), - }, -}; - -module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Naveen Kumar / Sundar Iyer "); -MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver"); -MODULE_ALIAS("platform:nomadik-ske-keypad"); diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h deleted file mode 100644 index 7efabbca1dca..000000000000 --- a/include/linux/platform_data/keypad-nomadik-ske.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Naveen Kumar Gaddipati - * - * ux500 Scroll key and Keypad Encoder (SKE) header - */ - -#ifndef __SKE_H -#define __SKE_H - -#include - -/* register definitions for SKE peripheral */ -#define SKE_CR 0x00 -#define SKE_VAL0 0x04 -#define SKE_VAL1 0x08 -#define SKE_DBCR 0x0C -#define SKE_IMSC 0x10 -#define SKE_RIS 0x14 -#define SKE_MIS 0x18 -#define SKE_ICR 0x1C - -/* - * Keypad module - */ - -/** - * struct keypad_platform_data - structure for platform specific data - * @init: pointer to keypad init function - * @exit: pointer to keypad deinitialisation function - * @keymap_data: matrix scan code table for keycodes - * @krow: maximum number of rows - * @kcol: maximum number of columns - * @debounce_ms: platform specific debounce time - * @no_autorepeat: flag for auto repetition - * @wakeup_enable: allow waking up the system - */ -struct ske_keypad_platform_data { - int (*init)(void); - int (*exit)(void); - const struct matrix_keymap_data *keymap_data; - u8 krow; - u8 kcol; - u8 debounce_ms; - bool no_autorepeat; - bool wakeup_enable; -}; -#endif /*__SKE_KPD_H*/ -- cgit v1.2.3 From ccce71013406a0a3c81850dab940f07b112349d3 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 14 Aug 2024 14:21:18 +0200 Subject: mtd: rawnand: davinci: make platform_data private There are no longer any users of the platform data for davinci rawnand in board files. We can remove the public pdata headers and move the structures that are still used into the driver compilation unit while removing the rest. Signed-off-by: Bartosz Golaszewski Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240814122120.13975-1-brgl@bgdev.pl --- drivers/mtd/nand/raw/davinci_nand.c | 70 ++++++++++++++++++-- include/linux/platform_data/mtd-davinci-aemif.h | 36 ---------- include/linux/platform_data/mtd-davinci.h | 88 ------------------------- 3 files changed, 65 insertions(+), 129 deletions(-) delete mode 100644 include/linux/platform_data/mtd-davinci-aemif.h delete mode 100644 include/linux/platform_data/mtd-davinci.h (limited to 'include/linux/platform_data') diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c index 051deea768db..392678143a36 100644 --- a/drivers/mtd/nand/raw/davinci_nand.c +++ b/drivers/mtd/nand/raw/davinci_nand.c @@ -20,8 +20,71 @@ #include #include -#include -#include +#define NRCSR_OFFSET 0x00 +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { + uint32_t mask_ale; + uint32_t mask_cle; + + /* + * 0-indexed chip-select number of the asynchronous + * interface to which the NAND device has been connected. + * + * So, if you have NAND connected to CS3 of DA850, you + * will pass '1' here. Since the asynchronous interface + * on DA850 starts from CS2. + */ + uint32_t core_chipsel; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned int nr_parts; + + /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!) + * soft == NAND_ECC_ENGINE_TYPE_SOFT + * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. + */ + enum nand_ecc_engine_type engine_type; + enum nand_ecc_placement ecc_placement; + u8 ecc_bits; + + /* e.g. NAND_BUSWIDTH_16 */ + unsigned int options; + /* e.g. NAND_BBT_USE_FLASH */ + unsigned int bbt_options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; +}; /* * This is a device driver for the NAND flash controller found on the @@ -54,8 +117,6 @@ struct davinci_nand_info { uint32_t mask_cle; uint32_t core_chipsel; - - struct davinci_aemif_timing *timing; }; static DEFINE_SPINLOCK(davinci_nand_lock); @@ -775,7 +836,6 @@ static int nand_davinci_probe(struct platform_device *pdev) info->chip.options = pdata->options; info->chip.bbt_td = pdata->bbt_td; info->chip.bbt_md = pdata->bbt_md; - info->timing = pdata->timing; info->current_cs = info->vaddr; info->core_chipsel = pdata->core_chipsel; diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h deleted file mode 100644 index a49826214a39..000000000000 --- a/include/linux/platform_data/mtd-davinci-aemif.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci AEMIF support - * - * Copyright 2010 (C) Texas Instruments, Inc. https://www.ti.com/ - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ -#ifndef _MACH_DAVINCI_AEMIF_H -#define _MACH_DAVINCI_AEMIF_H - -#include - -#define NRCSR_OFFSET 0x00 -#define AWCCR_OFFSET 0x04 -#define A1CR_OFFSET 0x10 - -#define ACR_ASIZE_MASK 0x3 -#define ACR_EW_MASK BIT(30) -#define ACR_SS_MASK BIT(31) - -/* All timings in nanoseconds */ -struct davinci_aemif_timing { - u8 wsetup; - u8 wstrobe; - u8 whold; - - u8 rsetup; - u8 rstrobe; - u8 rhold; - - u8 ta; -}; - -#endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h deleted file mode 100644 index dd474dd44848..000000000000 --- a/include/linux/platform_data/mtd-davinci.h +++ /dev/null @@ -1,88 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * mach-davinci/nand.h - * - * Copyright © 2006 Texas Instruments. - * - * Ported to 2.6.23 Copyright © 2008 by - * Sander Huijsen - * Troy Kisky - * Dirk Behme - * - * -------------------------------------------------------------------------- - */ - -#ifndef __ARCH_ARM_DAVINCI_NAND_H -#define __ARCH_ARM_DAVINCI_NAND_H - -#include - -#define NANDFCR_OFFSET 0x60 -#define NANDFSR_OFFSET 0x64 -#define NANDF1ECC_OFFSET 0x70 - -/* 4-bit ECC syndrome registers */ -#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc -#define NAND_4BIT_ECC1_OFFSET 0xc0 -#define NAND_4BIT_ECC2_OFFSET 0xc4 -#define NAND_4BIT_ECC3_OFFSET 0xc8 -#define NAND_4BIT_ECC4_OFFSET 0xcc -#define NAND_ERR_ADD1_OFFSET 0xd0 -#define NAND_ERR_ADD2_OFFSET 0xd4 -#define NAND_ERR_ERRVAL1_OFFSET 0xd8 -#define NAND_ERR_ERRVAL2_OFFSET 0xdc - -/* NOTE: boards don't need to use these address bits - * for ALE/CLE unless they support booting from NAND. - * They're used unless platform data overrides them. - */ -#define MASK_ALE 0x08 -#define MASK_CLE 0x10 - -struct davinci_nand_pdata { /* platform_data */ - uint32_t mask_ale; - uint32_t mask_cle; - - /* - * 0-indexed chip-select number of the asynchronous - * interface to which the NAND device has been connected. - * - * So, if you have NAND connected to CS3 of DA850, you - * will pass '1' here. Since the asynchronous interface - * on DA850 starts from CS2. - */ - uint32_t core_chipsel; - - /* for packages using two chipselects */ - uint32_t mask_chipsel; - - /* board's default static partition info */ - struct mtd_partition *parts; - unsigned nr_parts; - - /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!) - * soft == NAND_ECC_ENGINE_TYPE_SOFT - * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits - * - * All DaVinci-family chips support 1-bit hardware ECC. - * Newer ones also support 4-bit ECC, but are awkward - * using it with large page chips. - */ - enum nand_ecc_engine_type engine_type; - enum nand_ecc_placement ecc_placement; - u8 ecc_bits; - - /* e.g. NAND_BUSWIDTH_16 */ - unsigned options; - /* e.g. NAND_BBT_USE_FLASH */ - unsigned bbt_options; - - /* Main and mirror bbt descriptor overrides */ - struct nand_bbt_descr *bbt_td; - struct nand_bbt_descr *bbt_md; - - /* Access timings */ - struct davinci_aemif_timing *timing; -}; - -#endif /* __ARCH_ARM_DAVINCI_NAND_H */ -- cgit v1.2.3 From a96c5515d0d15df103598b2bc57245d66143b5dd Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Mon, 26 Aug 2024 21:43:08 +0000 Subject: net: dsa: microchip: Add KSZ8895/KSZ8864 switch support KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it shares some registers and functions in those switches already implemented in the KSZ DSA driver. Signed-off-by: Tristram Ha Tested-by: Pieter Van Trappen Reviewed-by: Oleksij Rempel Signed-off-by: Jakub Kicinski --- drivers/net/dsa/microchip/ksz8795.c | 16 ++-- drivers/net/dsa/microchip/ksz_common.c | 134 ++++++++++++++++++++++++++-- drivers/net/dsa/microchip/ksz_common.h | 25 +++++- drivers/net/dsa/microchip/ksz_dcb.c | 2 +- drivers/net/dsa/microchip/ksz_spi.c | 15 +++- include/linux/platform_data/microchip-ksz.h | 2 + 6 files changed, 178 insertions(+), 16 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index a01079297a8c..aa09d89debf0 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -188,6 +188,8 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) case KSZ8765_CHIP_ID: return ksz8795_change_mtu(dev, frame_size); case KSZ8830_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return ksz8863_change_mtu(dev, frame_size); } @@ -384,7 +386,7 @@ static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, u64 *dropped, u64 *cnt) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt); else ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt); @@ -392,7 +394,7 @@ void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze) { - if (ksz_is_ksz88x3(dev)) + if (is_ksz88xx(dev)) return; /* enable the port for flush/freeze function */ @@ -410,7 +412,8 @@ void ksz8_port_init_cnt(struct ksz_device *dev, int port) struct ksz_port_mib *mib = &dev->ports[port].mib; u64 *dropped; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { /* flush all enabled port MIB counters */ ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); @@ -609,11 +612,11 @@ static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, shifts[STATIC_MAC_FWD_PORTS]; alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; - /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + /* KSZ8795/KSZ8895 family switches have STATIC_MAC_TABLE_USE_FID and * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the * static MAC table compared to doing write. */ - if (ksz_is_ksz87xx(dev)) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) data_hi >>= 1; alu->is_static = true; alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; @@ -1692,7 +1695,8 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) for (i = 0; i < dev->phy_port_cnt; i++) { p = &dev->ports[i]; - if (!ksz_is_ksz88x3(dev)) { + /* For KSZ8795 family. */ + if (ksz_is_ksz87xx(dev)) { ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote); if (remote & KSZ8_PORT_FIBER_MODE) p->fiber = 1; diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index cd3991792b69..6609bf271ad0 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2,7 +2,7 @@ /* * Microchip switch driver main logic * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2024 Microchip Technology Inc. */ #include @@ -277,7 +277,7 @@ static const struct phylink_mac_ops ksz8_phylink_mac_ops = { .mac_link_up = ksz8_phylink_mac_link_up, }; -static const struct ksz_dev_ops ksz88x3_dev_ops = { +static const struct ksz_dev_ops ksz88xx_dev_ops = { .setup = ksz8_setup, .get_port_addr = ksz8_get_port_addr, .cfg_port_member = ksz8_cfg_port_member, @@ -572,6 +572,61 @@ static u8 ksz8863_shifts[] = { [DYNAMIC_MAC_SRC_PORT] = 20, }; +static const u16 ksz8895_regs[] = { + [REG_SW_MAC_ADDR] = 0x68, + [REG_IND_CTRL_0] = 0x6E, + [REG_IND_DATA_8] = 0x70, + [REG_IND_DATA_CHECK] = 0x72, + [REG_IND_DATA_HI] = 0x71, + [REG_IND_DATA_LO] = 0x75, + [REG_IND_MIB_CHECK] = 0x75, + [P_FORCE_CTRL] = 0x0C, + [P_LINK_STATUS] = 0x0E, + [P_LOCAL_CTRL] = 0x0C, + [P_NEG_RESTART_CTRL] = 0x0D, + [P_REMOTE_STATUS] = 0x0E, + [P_SPEED_STATUS] = 0x09, + [S_TAIL_TAG_CTRL] = 0x0C, + [P_STP_CTRL] = 0x02, + [S_START_CTRL] = 0x01, + [S_BROADCAST_CTRL] = 0x06, + [S_MULTICAST_CTRL] = 0x04, +}; + +static const u32 ksz8895_masks[] = { + [PORT_802_1P_REMAPPING] = BIT(7), + [SW_TAIL_TAG_ENABLE] = BIT(1), + [MIB_COUNTER_OVERFLOW] = BIT(7), + [MIB_COUNTER_VALID] = BIT(6), + [VLAN_TABLE_FID] = GENMASK(6, 0), + [VLAN_TABLE_MEMBERSHIP] = GENMASK(11, 7), + [VLAN_TABLE_VALID] = BIT(12), + [STATIC_MAC_TABLE_VALID] = BIT(21), + [STATIC_MAC_TABLE_USE_FID] = BIT(23), + [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), + [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), + [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), + [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), + [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), + [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), +}; + +static const u8 ksz8895_shifts[] = { + [VLAN_TABLE_MEMBERSHIP_S] = 7, + [VLAN_TABLE] = 13, + [STATIC_MAC_FWD_PORTS] = 16, + [STATIC_MAC_FID] = 24, + [DYNAMIC_MAC_ENTRIES_H] = 3, + [DYNAMIC_MAC_ENTRIES] = 29, + [DYNAMIC_MAC_FID] = 16, + [DYNAMIC_MAC_TIMESTAMP] = 27, + [DYNAMIC_MAC_SRC_PORT] = 24, +}; + static const u16 ksz9477_regs[] = { [REG_SW_MAC_ADDR] = 0x0302, [P_STP_CTRL] = 0x0B04, @@ -1397,7 +1452,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .port_cnt = 3, .num_tx_queues = 4, .num_ipms = 4, - .ops = &ksz88x3_dev_ops, + .ops = &ksz88xx_dev_ops, .phylink_mac_ops = &ksz8830_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), @@ -1412,6 +1467,61 @@ const struct ksz_chip_data ksz_switch_chips[] = { .rd_table = &ksz8873_register_set, }, + [KSZ8864] = { + /* WARNING + * ======= + * KSZ8864 is similar to KSZ8895, except the first port + * does not exist. + * external cpu + * KSZ8864 1,2,3 4 + * KSZ8895 0,1,2,3 4 + * port_cnt is configured as 5, even though it is 4 + */ + .chip_id = KSZ8864_CHIP_ID, + .dev_name = "KSZ8864", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {false, true, true, true, false}, + }, + + [KSZ8895] = { + .chip_id = KSZ8895_CHIP_ID, + .dev_name = "KSZ8895", + .num_vlans = 4096, + .num_alus = 0, + .num_statics = 32, + .cpu_ports = 0x10, /* can be configured as cpu port */ + .port_cnt = 5, /* total cpu and user ports */ + .num_tx_queues = 4, + .num_ipms = 4, + .ops = &ksz88xx_dev_ops, + .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .mib_names = ksz88xx_mib_names, + .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), + .reg_mib_cnt = MIB_COUNTER_NUM, + .regs = ksz8895_regs, + .masks = ksz8895_masks, + .shifts = ksz8895_shifts, + .supports_mii = {false, false, false, false, true}, + .supports_rmii = {false, false, false, false, true}, + .internal_phy = {true, true, true, true, false}, + }, + [KSZ9477] = { .chip_id = KSZ9477_CHIP_ID, .dev_name = "KSZ9477", @@ -2937,9 +3047,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, struct ksz_device *dev = ds->priv; enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE; - if (dev->chip_id == KSZ8795_CHIP_ID || - dev->chip_id == KSZ8794_CHIP_ID || - dev->chip_id == KSZ8765_CHIP_ID) + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) proto = DSA_TAG_PROTO_KSZ8795; if (dev->chip_id == KSZ8830_CHIP_ID || @@ -3055,6 +3163,8 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8765_CHIP_ID: return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8830_CHIP_ID: + case KSZ8864_CHIP_ID: + case KSZ8895_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; case KSZ8563_CHIP_ID: case KSZ8567_CHIP_ID: @@ -3412,6 +3522,18 @@ static int ksz_switch_detect(struct ksz_device *dev) else return -ENODEV; break; + case KSZ8895_FAMILY_ID: + if (id2 == KSZ8895_CHIP_ID_95 || + id2 == KSZ8895_CHIP_ID_95R) + dev->chip_id = KSZ8895_CHIP_ID; + else + return -ENODEV; + ret = ksz_read8(dev, REG_KSZ8864_CHIP_ID, &id4); + if (ret) + return ret; + if (id4 & SW_KSZ8864) + dev->chip_id = KSZ8864_CHIP_ID; + break; default: ret = ksz_read32(dev, REG_CHIP_ID0, &id32); if (ret) diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 8094d90d6ca4..e08d5a1339f4 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* Microchip switch driver common header * - * Copyright (C) 2017-2019 Microchip Technology Inc. + * Copyright (C) 2017-2024 Microchip Technology Inc. */ #ifndef __KSZ_COMMON_H @@ -201,6 +201,8 @@ enum ksz_model { KSZ8794, KSZ8765, KSZ8830, + KSZ8864, + KSZ8895, KSZ9477, KSZ9896, KSZ9897, @@ -629,9 +631,21 @@ static inline bool ksz_is_ksz88x3(struct ksz_device *dev) return dev->chip_id == KSZ8830_CHIP_ID; } +static inline bool ksz_is_8895_family(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8895_CHIP_ID || + dev->chip_id == KSZ8864_CHIP_ID; +} + static inline bool is_ksz8(struct ksz_device *dev) { - return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev); + return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev) || + ksz_is_8895_family(dev); +} + +static inline bool is_ksz88xx(struct ksz_device *dev) +{ + return ksz_is_ksz88x3(dev) || ksz_is_8895_family(dev); } static inline bool is_ksz9477(struct ksz_device *dev) @@ -665,6 +679,7 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define SW_FAMILY_ID_M GENMASK(15, 8) #define KSZ87_FAMILY_ID 0x87 #define KSZ88_FAMILY_ID 0x88 +#define KSZ8895_FAMILY_ID 0x95 #define KSZ8_PORT_STATUS_0 0x08 #define KSZ8_PORT_FIBER_MODE BIT(7) @@ -673,6 +688,12 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port) #define KSZ87_CHIP_ID_94 0x6 #define KSZ87_CHIP_ID_95 0x9 #define KSZ88_CHIP_ID_63 0x3 +#define KSZ8895_CHIP_ID_95 0x4 +#define KSZ8895_CHIP_ID_95R 0x6 + +/* KSZ8895 specific register */ +#define REG_KSZ8864_CHIP_ID 0xFE +#define SW_KSZ8864 BIT(7) #define SW_REV_ID_M GENMASK(7, 4) diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c index 086bc9b3cf53..30b4a6186e38 100644 --- a/drivers/net/dsa/microchip/ksz_dcb.c +++ b/drivers/net/dsa/microchip/ksz_dcb.c @@ -113,7 +113,7 @@ static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg, static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg, int *per_reg, u8 *mask) { - if (ksz_is_ksz87xx(dev)) { + if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) { *reg = KSZ8765_REG_TOS_DSCP_CTRL; *per_reg = 4; *mask = GENMASK(1, 0); diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index 8e8d83213b04..f4287310e89f 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -2,7 +2,7 @@ /* * Microchip ksz series register access through SPI * - * Copyright (C) 2017 Microchip Technology Inc. + * Copyright (C) 2017-2024 Microchip Technology Inc. * Tristram Ha */ @@ -60,6 +60,9 @@ static int ksz_spi_probe(struct spi_device *spi) chip->chip_id == KSZ8794_CHIP_ID || chip->chip_id == KSZ8765_CHIP_ID) regmap_config = ksz8795_regmap_config; + else if (chip->chip_id == KSZ8895_CHIP_ID || + chip->chip_id == KSZ8864_CHIP_ID) + regmap_config = ksz8863_regmap_config; else regmap_config = ksz9477_regmap_config; @@ -136,10 +139,18 @@ static const struct of_device_id ksz_dt_ids[] = { .compatible = "microchip,ksz8863", .data = &ksz_switch_chips[KSZ8830] }, + { + .compatible = "microchip,ksz8864", + .data = &ksz_switch_chips[KSZ8864] + }, { .compatible = "microchip,ksz8873", .data = &ksz_switch_chips[KSZ8830] }, + { + .compatible = "microchip,ksz8895", + .data = &ksz_switch_chips[KSZ8895] + }, { .compatible = "microchip,ksz9477", .data = &ksz_switch_chips[KSZ9477] @@ -201,7 +212,9 @@ static const struct spi_device_id ksz_spi_ids[] = { { "ksz8794" }, { "ksz8795" }, { "ksz8863" }, + { "ksz8864" }, { "ksz8873" }, + { "ksz8895" }, { "ksz9477" }, { "ksz9896" }, { "ksz9897" }, diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index 8c659db4da6b..d074019474f5 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -28,6 +28,8 @@ enum ksz_chip_id { KSZ8794_CHIP_ID = 0x8794, KSZ8765_CHIP_ID = 0x8765, KSZ8830_CHIP_ID = 0x8830, + KSZ8864_CHIP_ID = 0x8864, + KSZ8895_CHIP_ID = 0x8895, KSZ9477_CHIP_ID = 0x00947700, KSZ9896_CHIP_ID = 0x00989600, KSZ9897_CHIP_ID = 0x00989700, -- cgit v1.2.3 From 73d5fc92a11cacb73a1aac0b5793c47e48c5b537 Mon Sep 17 00:00:00 2001 From: Nishad Saraf Date: Mon, 19 Aug 2024 14:19:48 -0700 Subject: dmaengine: amd: qdma: Add AMD QDMA driver Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI Accelerator devices. https://www.xilinx.com/applications/data-center/v70.html The QDMA subsystem is used in conjunction with the PCI Express IP block to provide high performance data transfer between host memory and the card's DMA subsystem. +-------+ +-------+ +-----------+ PCIe | | | | | | Tx/Rx | | | | AXI | | <=======> | PCIE | <===> | QDMA | <====>| User Logic| | | | | | | +-------+ +-------+ +-----------+ The primary mechanism to transfer data using the QDMA is for the QDMA engine to operate on instructions (descriptors) provided by the host operating system. Using the descriptors, the QDMA can move data in both the Host to Card (H2C) direction, or the Card to Host (C2H) direction. The QDMA provides a per-queue basis option whether DMA traffic goes to an AXI4 memory map (MM) interface or to an AXI4-Stream interface. The hardware detail is provided by https://docs.xilinx.com/r/en-US/pg302-qdma Implements dmaengine APIs to support MM DMA transfers. - probe the available DMA channels - use dma_slave_map for channel lookup - use virtual channel to manage dmaengine tx descriptors - implement device_prep_slave_sg callback to handle host scatter gather list Signed-off-by: Nishad Saraf Signed-off-by: Lizhi Hou Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com Signed-off-by: Vinod Koul --- MAINTAINERS | 8 + drivers/dma/Kconfig | 2 + drivers/dma/Makefile | 1 + drivers/dma/amd/Kconfig | 14 + drivers/dma/amd/Makefile | 3 + drivers/dma/amd/qdma/Makefile | 5 + drivers/dma/amd/qdma/qdma-comm-regs.c | 64 ++ drivers/dma/amd/qdma/qdma.c | 1143 ++++++++++++++++++++++++++++++++ drivers/dma/amd/qdma/qdma.h | 266 ++++++++ include/linux/platform_data/amd_qdma.h | 36 + 10 files changed, 1542 insertions(+) create mode 100644 drivers/dma/amd/Kconfig create mode 100644 drivers/dma/amd/Makefile create mode 100644 drivers/dma/amd/qdma/Makefile create mode 100644 drivers/dma/amd/qdma/qdma-comm-regs.c create mode 100644 drivers/dma/amd/qdma/qdma.c create mode 100644 drivers/dma/amd/qdma/qdma.h create mode 100644 include/linux/platform_data/amd_qdma.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index 42decde38320..a9154c66795b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1128,6 +1128,14 @@ L: dmaengine@vger.kernel.org S: Maintained F: drivers/dma/ptdma/ +AMD QDMA DRIVER +M: Nishad Saraf +M: Lizhi Hou +L: dmaengine@vger.kernel.org +S: Supported +F: drivers/dma/amd/qdma/ +F: include/linux/platform_data/amd_qdma.h + AMD SEATTLE DEVICE TREE SUPPORT M: Suravee Suthikulpanit M: Tom Lendacky diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index cc0a62c34861..dbb75d35d767 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -716,6 +716,8 @@ config XILINX_ZYNQMP_DPDMA display driver. # driver files +source "drivers/dma/amd/Kconfig" + source "drivers/dma/bestcomm/Kconfig" source "drivers/dma/mediatek/Kconfig" diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 374ea98faf43..29c99bf9fd37 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_ST_FDMA) += st_fdma.o obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/ obj-$(CONFIG_INTEL_LDMA) += lgm/ +obj-y += amd/ obj-y += mediatek/ obj-y += qcom/ obj-y += stm32/ diff --git a/drivers/dma/amd/Kconfig b/drivers/dma/amd/Kconfig new file mode 100644 index 000000000000..7d1f51d69675 --- /dev/null +++ b/drivers/dma/amd/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config AMD_QDMA + tristate "AMD Queue-based DMA" + depends on HAS_IOMEM + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + select REGMAP_MMIO + help + Enable support for the AMD Queue-based DMA subsystem. The primary + mechanism to transfer data using the QDMA is for the QDMA engine to + operate on instructions (descriptors) provided by the host operating + system. Using the descriptors, the QDMA can move data in either the + Host to Card (H2C) direction or the Card to Host (C2H) direction. diff --git a/drivers/dma/amd/Makefile b/drivers/dma/amd/Makefile new file mode 100644 index 000000000000..37212be9364f --- /dev/null +++ b/drivers/dma/amd/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_AMD_QDMA) += qdma/ diff --git a/drivers/dma/amd/qdma/Makefile b/drivers/dma/amd/qdma/Makefile new file mode 100644 index 000000000000..011268fef377 --- /dev/null +++ b/drivers/dma/amd/qdma/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_AMD_QDMA) += amd-qdma.o + +amd-qdma-$(CONFIG_AMD_QDMA) := qdma.o qdma-comm-regs.o diff --git a/drivers/dma/amd/qdma/qdma-comm-regs.c b/drivers/dma/amd/qdma/qdma-comm-regs.c new file mode 100644 index 000000000000..9162f9d367cc --- /dev/null +++ b/drivers/dma/amd/qdma/qdma-comm-regs.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ + +#ifndef __QDMA_REGS_DEF_H +#define __QDMA_REGS_DEF_H + +#include "qdma.h" + +const struct qdma_reg qdma_regos_default[QDMA_REGO_MAX] = { + [QDMA_REGO_CTXT_DATA] = QDMA_REGO(0x804, 8), + [QDMA_REGO_CTXT_CMD] = QDMA_REGO(0x844, 1), + [QDMA_REGO_CTXT_MASK] = QDMA_REGO(0x824, 8), + [QDMA_REGO_MM_H2C_CTRL] = QDMA_REGO(0x1004, 1), + [QDMA_REGO_MM_C2H_CTRL] = QDMA_REGO(0x1204, 1), + [QDMA_REGO_QUEUE_COUNT] = QDMA_REGO(0x120, 1), + [QDMA_REGO_RING_SIZE] = QDMA_REGO(0x204, 1), + [QDMA_REGO_H2C_PIDX] = QDMA_REGO(0x18004, 1), + [QDMA_REGO_C2H_PIDX] = QDMA_REGO(0x18008, 1), + [QDMA_REGO_INTR_CIDX] = QDMA_REGO(0x18000, 1), + [QDMA_REGO_FUNC_ID] = QDMA_REGO(0x12c, 1), + [QDMA_REGO_ERR_INT] = QDMA_REGO(0xb04, 1), + [QDMA_REGO_ERR_STAT] = QDMA_REGO(0x248, 1), +}; + +const struct qdma_reg_field qdma_regfs_default[QDMA_REGF_MAX] = { + /* QDMA_REGO_CTXT_DATA fields */ + [QDMA_REGF_IRQ_ENABLE] = QDMA_REGF(53, 53), + [QDMA_REGF_WBK_ENABLE] = QDMA_REGF(52, 52), + [QDMA_REGF_WBI_CHECK] = QDMA_REGF(34, 34), + [QDMA_REGF_IRQ_ARM] = QDMA_REGF(16, 16), + [QDMA_REGF_IRQ_VEC] = QDMA_REGF(138, 128), + [QDMA_REGF_IRQ_AGG] = QDMA_REGF(139, 139), + [QDMA_REGF_WBI_INTVL_ENABLE] = QDMA_REGF(35, 35), + [QDMA_REGF_MRKR_DISABLE] = QDMA_REGF(62, 62), + [QDMA_REGF_QUEUE_ENABLE] = QDMA_REGF(32, 32), + [QDMA_REGF_QUEUE_MODE] = QDMA_REGF(63, 63), + [QDMA_REGF_DESC_BASE] = QDMA_REGF(127, 64), + [QDMA_REGF_DESC_SIZE] = QDMA_REGF(49, 48), + [QDMA_REGF_RING_ID] = QDMA_REGF(47, 44), + [QDMA_REGF_QUEUE_BASE] = QDMA_REGF(11, 0), + [QDMA_REGF_QUEUE_MAX] = QDMA_REGF(44, 32), + [QDMA_REGF_FUNCTION_ID] = QDMA_REGF(24, 17), + [QDMA_REGF_INTR_AGG_BASE] = QDMA_REGF(66, 15), + [QDMA_REGF_INTR_VECTOR] = QDMA_REGF(11, 1), + [QDMA_REGF_INTR_SIZE] = QDMA_REGF(69, 67), + [QDMA_REGF_INTR_VALID] = QDMA_REGF(0, 0), + [QDMA_REGF_INTR_COLOR] = QDMA_REGF(14, 14), + [QDMA_REGF_INTR_FUNCTION_ID] = QDMA_REGF(125, 114), + /* QDMA_REGO_CTXT_CMD fields */ + [QDMA_REGF_CMD_INDX] = QDMA_REGF(19, 7), + [QDMA_REGF_CMD_CMD] = QDMA_REGF(6, 5), + [QDMA_REGF_CMD_TYPE] = QDMA_REGF(4, 1), + [QDMA_REGF_CMD_BUSY] = QDMA_REGF(0, 0), + /* QDMA_REGO_QUEUE_COUNT fields */ + [QDMA_REGF_QUEUE_COUNT] = QDMA_REGF(11, 0), + /* QDMA_REGO_ERR_INT fields */ + [QDMA_REGF_ERR_INT_FUNC] = QDMA_REGF(11, 0), + [QDMA_REGF_ERR_INT_VEC] = QDMA_REGF(22, 12), + [QDMA_REGF_ERR_INT_ARM] = QDMA_REGF(24, 24), +}; + +#endif /* __QDMA_REGS_DEF_H */ diff --git a/drivers/dma/amd/qdma/qdma.c b/drivers/dma/amd/qdma/qdma.c new file mode 100644 index 000000000000..b0a1f3ad851b --- /dev/null +++ b/drivers/dma/amd/qdma/qdma.c @@ -0,0 +1,1143 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DMA driver for AMD Queue-based DMA Subsystem + * + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qdma.h" + +#define CHAN_STR(q) (((q)->dir == DMA_MEM_TO_DEV) ? "H2C" : "C2H") +#define QDMA_REG_OFF(d, r) ((d)->roffs[r].off) + +/* MMIO regmap config for all QDMA registers */ +static const struct regmap_config qdma_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static inline struct qdma_queue *to_qdma_queue(struct dma_chan *chan) +{ + return container_of(chan, struct qdma_queue, vchan.chan); +} + +static inline struct qdma_mm_vdesc *to_qdma_vdesc(struct virt_dma_desc *vdesc) +{ + return container_of(vdesc, struct qdma_mm_vdesc, vdesc); +} + +static inline u32 qdma_get_intr_ring_idx(struct qdma_device *qdev) +{ + u32 idx; + + idx = qdev->qintr_rings[qdev->qintr_ring_idx++].ridx; + qdev->qintr_ring_idx %= qdev->qintr_ring_num; + + return idx; +} + +static u64 qdma_get_field(const struct qdma_device *qdev, const u32 *data, + enum qdma_reg_fields field) +{ + const struct qdma_reg_field *f = &qdev->rfields[field]; + u16 low_pos, hi_pos, low_bit, hi_bit; + u64 value = 0, mask; + + low_pos = f->lsb / BITS_PER_TYPE(*data); + hi_pos = f->msb / BITS_PER_TYPE(*data); + + if (low_pos == hi_pos) { + low_bit = f->lsb % BITS_PER_TYPE(*data); + hi_bit = f->msb % BITS_PER_TYPE(*data); + mask = GENMASK(hi_bit, low_bit); + value = (data[low_pos] & mask) >> low_bit; + } else if (hi_pos == low_pos + 1) { + low_bit = f->lsb % BITS_PER_TYPE(*data); + hi_bit = low_bit + (f->msb - f->lsb); + value = ((u64)data[hi_pos] << BITS_PER_TYPE(*data)) | + data[low_pos]; + mask = GENMASK_ULL(hi_bit, low_bit); + value = (value & mask) >> low_bit; + } else { + hi_bit = f->msb % BITS_PER_TYPE(*data); + mask = GENMASK(hi_bit, 0); + value = data[hi_pos] & mask; + low_bit = f->msb - f->lsb - hi_bit; + value <<= low_bit; + low_bit -= 32; + value |= (u64)data[hi_pos - 1] << low_bit; + mask = GENMASK(31, 32 - low_bit); + value |= (data[hi_pos - 2] & mask) >> low_bit; + } + + return value; +} + +static void qdma_set_field(const struct qdma_device *qdev, u32 *data, + enum qdma_reg_fields field, u64 value) +{ + const struct qdma_reg_field *f = &qdev->rfields[field]; + u16 low_pos, hi_pos, low_bit; + + low_pos = f->lsb / BITS_PER_TYPE(*data); + hi_pos = f->msb / BITS_PER_TYPE(*data); + low_bit = f->lsb % BITS_PER_TYPE(*data); + + data[low_pos++] |= value << low_bit; + if (low_pos <= hi_pos) + data[low_pos++] |= (u32)(value >> (32 - low_bit)); + if (low_pos <= hi_pos) + data[low_pos] |= (u32)(value >> (64 - low_bit)); +} + +static inline int qdma_reg_write(const struct qdma_device *qdev, + const u32 *data, enum qdma_regs reg) +{ + const struct qdma_reg *r = &qdev->roffs[reg]; + int ret; + + if (r->count > 1) + ret = regmap_bulk_write(qdev->regmap, r->off, data, r->count); + else + ret = regmap_write(qdev->regmap, r->off, *data); + + return ret; +} + +static inline int qdma_reg_read(const struct qdma_device *qdev, u32 *data, + enum qdma_regs reg) +{ + const struct qdma_reg *r = &qdev->roffs[reg]; + int ret; + + if (r->count > 1) + ret = regmap_bulk_read(qdev->regmap, r->off, data, r->count); + else + ret = regmap_read(qdev->regmap, r->off, data); + + return ret; +} + +static int qdma_context_cmd_execute(const struct qdma_device *qdev, + enum qdma_ctxt_type type, + enum qdma_ctxt_cmd cmd, u16 index) +{ + u32 value = 0; + int ret; + + qdma_set_field(qdev, &value, QDMA_REGF_CMD_INDX, index); + qdma_set_field(qdev, &value, QDMA_REGF_CMD_CMD, cmd); + qdma_set_field(qdev, &value, QDMA_REGF_CMD_TYPE, type); + + ret = qdma_reg_write(qdev, &value, QDMA_REGO_CTXT_CMD); + if (ret) + return ret; + + ret = regmap_read_poll_timeout(qdev->regmap, + QDMA_REG_OFF(qdev, QDMA_REGO_CTXT_CMD), + value, + !qdma_get_field(qdev, &value, + QDMA_REGF_CMD_BUSY), + QDMA_POLL_INTRVL_US, + QDMA_POLL_TIMEOUT_US); + if (ret) { + qdma_err(qdev, "Context command execution timed out"); + return ret; + } + + return 0; +} + +static int qdma_context_write_data(const struct qdma_device *qdev, + const u32 *data) +{ + u32 mask[QDMA_CTXT_REGMAP_LEN]; + int ret; + + memset(mask, ~0, sizeof(mask)); + + ret = qdma_reg_write(qdev, mask, QDMA_REGO_CTXT_MASK); + if (ret) + return ret; + + ret = qdma_reg_write(qdev, data, QDMA_REGO_CTXT_DATA); + if (ret) + return ret; + + return 0; +} + +static void qdma_prep_sw_desc_context(const struct qdma_device *qdev, + const struct qdma_ctxt_sw_desc *ctxt, + u32 *data) +{ + memset(data, 0, QDMA_CTXT_REGMAP_LEN * sizeof(*data)); + qdma_set_field(qdev, data, QDMA_REGF_DESC_BASE, ctxt->desc_base); + qdma_set_field(qdev, data, QDMA_REGF_IRQ_VEC, ctxt->vec); + qdma_set_field(qdev, data, QDMA_REGF_FUNCTION_ID, qdev->fid); + + qdma_set_field(qdev, data, QDMA_REGF_DESC_SIZE, QDMA_DESC_SIZE_32B); + qdma_set_field(qdev, data, QDMA_REGF_RING_ID, QDMA_DEFAULT_RING_ID); + qdma_set_field(qdev, data, QDMA_REGF_QUEUE_MODE, QDMA_QUEUE_OP_MM); + qdma_set_field(qdev, data, QDMA_REGF_IRQ_ENABLE, 1); + qdma_set_field(qdev, data, QDMA_REGF_WBK_ENABLE, 1); + qdma_set_field(qdev, data, QDMA_REGF_WBI_CHECK, 1); + qdma_set_field(qdev, data, QDMA_REGF_IRQ_ARM, 1); + qdma_set_field(qdev, data, QDMA_REGF_IRQ_AGG, 1); + qdma_set_field(qdev, data, QDMA_REGF_WBI_INTVL_ENABLE, 1); + qdma_set_field(qdev, data, QDMA_REGF_QUEUE_ENABLE, 1); + qdma_set_field(qdev, data, QDMA_REGF_MRKR_DISABLE, 1); +} + +static void qdma_prep_intr_context(const struct qdma_device *qdev, + const struct qdma_ctxt_intr *ctxt, + u32 *data) +{ + memset(data, 0, QDMA_CTXT_REGMAP_LEN * sizeof(*data)); + qdma_set_field(qdev, data, QDMA_REGF_INTR_AGG_BASE, ctxt->agg_base); + qdma_set_field(qdev, data, QDMA_REGF_INTR_VECTOR, ctxt->vec); + qdma_set_field(qdev, data, QDMA_REGF_INTR_SIZE, ctxt->size); + qdma_set_field(qdev, data, QDMA_REGF_INTR_VALID, ctxt->valid); + qdma_set_field(qdev, data, QDMA_REGF_INTR_COLOR, ctxt->color); + qdma_set_field(qdev, data, QDMA_REGF_INTR_FUNCTION_ID, qdev->fid); +} + +static void qdma_prep_fmap_context(const struct qdma_device *qdev, + const struct qdma_ctxt_fmap *ctxt, + u32 *data) +{ + memset(data, 0, QDMA_CTXT_REGMAP_LEN * sizeof(*data)); + qdma_set_field(qdev, data, QDMA_REGF_QUEUE_BASE, ctxt->qbase); + qdma_set_field(qdev, data, QDMA_REGF_QUEUE_MAX, ctxt->qmax); +} + +/* + * Program the indirect context register space + * + * Once the queue is enabled, context is dynamically updated by hardware. Any + * modification of the context through this API when the queue is enabled can + * result in unexpected behavior. Reading the context when the queue is enabled + * is not recommended as it can result in reduced performance. + */ +static int qdma_prog_context(struct qdma_device *qdev, enum qdma_ctxt_type type, + enum qdma_ctxt_cmd cmd, u16 index, u32 *ctxt) +{ + int ret; + + mutex_lock(&qdev->ctxt_lock); + if (cmd == QDMA_CTXT_WRITE) { + ret = qdma_context_write_data(qdev, ctxt); + if (ret) + goto failed; + } + + ret = qdma_context_cmd_execute(qdev, type, cmd, index); + if (ret) + goto failed; + + if (cmd == QDMA_CTXT_READ) { + ret = qdma_reg_read(qdev, ctxt, QDMA_REGO_CTXT_DATA); + if (ret) + goto failed; + } + +failed: + mutex_unlock(&qdev->ctxt_lock); + + return ret; +} + +static int qdma_check_queue_status(struct qdma_device *qdev, + enum dma_transfer_direction dir, u16 qid) +{ + u32 status, data[QDMA_CTXT_REGMAP_LEN] = {0}; + enum qdma_ctxt_type type; + int ret; + + if (dir == DMA_MEM_TO_DEV) + type = QDMA_CTXT_DESC_SW_H2C; + else + type = QDMA_CTXT_DESC_SW_C2H; + ret = qdma_prog_context(qdev, type, QDMA_CTXT_READ, qid, data); + if (ret) + return ret; + + status = qdma_get_field(qdev, data, QDMA_REGF_QUEUE_ENABLE); + if (status) { + qdma_err(qdev, "queue %d already in use", qid); + return -EBUSY; + } + + return 0; +} + +static int qdma_clear_queue_context(const struct qdma_queue *queue) +{ + enum qdma_ctxt_type h2c_types[] = { QDMA_CTXT_DESC_SW_H2C, + QDMA_CTXT_DESC_HW_H2C, + QDMA_CTXT_DESC_CR_H2C, + QDMA_CTXT_PFTCH, }; + enum qdma_ctxt_type c2h_types[] = { QDMA_CTXT_DESC_SW_C2H, + QDMA_CTXT_DESC_HW_C2H, + QDMA_CTXT_DESC_CR_C2H, + QDMA_CTXT_PFTCH, }; + struct qdma_device *qdev = queue->qdev; + enum qdma_ctxt_type *type; + int ret, num, i; + + if (queue->dir == DMA_MEM_TO_DEV) { + type = h2c_types; + num = ARRAY_SIZE(h2c_types); + } else { + type = c2h_types; + num = ARRAY_SIZE(c2h_types); + } + for (i = 0; i < num; i++) { + ret = qdma_prog_context(qdev, type[i], QDMA_CTXT_CLEAR, + queue->qid, NULL); + if (ret) { + qdma_err(qdev, "Failed to clear ctxt %d", type[i]); + return ret; + } + } + + return 0; +} + +static int qdma_setup_fmap_context(struct qdma_device *qdev) +{ + u32 ctxt[QDMA_CTXT_REGMAP_LEN]; + struct qdma_ctxt_fmap fmap; + int ret; + + ret = qdma_prog_context(qdev, QDMA_CTXT_FMAP, QDMA_CTXT_CLEAR, + qdev->fid, NULL); + if (ret) { + qdma_err(qdev, "Failed clearing context"); + return ret; + } + + fmap.qbase = 0; + fmap.qmax = qdev->chan_num * 2; + qdma_prep_fmap_context(qdev, &fmap, ctxt); + ret = qdma_prog_context(qdev, QDMA_CTXT_FMAP, QDMA_CTXT_WRITE, + qdev->fid, ctxt); + if (ret) + qdma_err(qdev, "Failed setup fmap, ret %d", ret); + + return ret; +} + +static int qdma_setup_queue_context(struct qdma_device *qdev, + const struct qdma_ctxt_sw_desc *sw_desc, + enum dma_transfer_direction dir, u16 qid) +{ + u32 ctxt[QDMA_CTXT_REGMAP_LEN]; + enum qdma_ctxt_type type; + int ret; + + if (dir == DMA_MEM_TO_DEV) + type = QDMA_CTXT_DESC_SW_H2C; + else + type = QDMA_CTXT_DESC_SW_C2H; + + qdma_prep_sw_desc_context(qdev, sw_desc, ctxt); + /* Setup SW descriptor context */ + ret = qdma_prog_context(qdev, type, QDMA_CTXT_WRITE, qid, ctxt); + if (ret) + qdma_err(qdev, "Failed setup SW desc ctxt for queue: %d", qid); + + return ret; +} + +/* + * Enable or disable memory-mapped DMA engines + * 1: enable, 0: disable + */ +static int qdma_sgdma_control(struct qdma_device *qdev, u32 ctrl) +{ + int ret; + + ret = qdma_reg_write(qdev, &ctrl, QDMA_REGO_MM_H2C_CTRL); + ret |= qdma_reg_write(qdev, &ctrl, QDMA_REGO_MM_C2H_CTRL); + + return ret; +} + +static int qdma_get_hw_info(struct qdma_device *qdev) +{ + struct qdma_platdata *pdata = dev_get_platdata(&qdev->pdev->dev); + u32 value = 0; + int ret; + + ret = qdma_reg_read(qdev, &value, QDMA_REGO_QUEUE_COUNT); + if (ret) + return ret; + + value = qdma_get_field(qdev, &value, QDMA_REGF_QUEUE_COUNT) + 1; + if (pdata->max_mm_channels * 2 > value) { + qdma_err(qdev, "not enough hw queues %d", value); + return -EINVAL; + } + qdev->chan_num = pdata->max_mm_channels; + + ret = qdma_reg_read(qdev, &qdev->fid, QDMA_REGO_FUNC_ID); + if (ret) + return ret; + + qdma_info(qdev, "max channel %d, function id %d", + qdev->chan_num, qdev->fid); + + return 0; +} + +static inline int qdma_update_pidx(const struct qdma_queue *queue, u16 pidx) +{ + struct qdma_device *qdev = queue->qdev; + + return regmap_write(qdev->regmap, queue->pidx_reg, + pidx | QDMA_QUEUE_ARM_BIT); +} + +static inline int qdma_update_cidx(const struct qdma_queue *queue, + u16 ridx, u16 cidx) +{ + struct qdma_device *qdev = queue->qdev; + + return regmap_write(qdev->regmap, queue->cidx_reg, + ((u32)ridx << 16) | cidx); +} + +/** + * qdma_free_vdesc - Free descriptor + * @vdesc: Virtual DMA descriptor + */ +static void qdma_free_vdesc(struct virt_dma_desc *vdesc) +{ + struct qdma_mm_vdesc *vd = to_qdma_vdesc(vdesc); + + kfree(vd); +} + +static int qdma_alloc_queues(struct qdma_device *qdev, + enum dma_transfer_direction dir) +{ + struct qdma_queue *q, **queues; + u32 i, pidx_base; + int ret; + + if (dir == DMA_MEM_TO_DEV) { + queues = &qdev->h2c_queues; + pidx_base = QDMA_REG_OFF(qdev, QDMA_REGO_H2C_PIDX); + } else { + queues = &qdev->c2h_queues; + pidx_base = QDMA_REG_OFF(qdev, QDMA_REGO_C2H_PIDX); + } + + *queues = devm_kcalloc(&qdev->pdev->dev, qdev->chan_num, sizeof(*q), + GFP_KERNEL); + if (!*queues) + return -ENOMEM; + + for (i = 0; i < qdev->chan_num; i++) { + ret = qdma_check_queue_status(qdev, dir, i); + if (ret) + return ret; + + q = &(*queues)[i]; + q->ring_size = QDMA_DEFAULT_RING_SIZE; + q->idx_mask = q->ring_size - 2; + q->qdev = qdev; + q->dir = dir; + q->qid = i; + q->pidx_reg = pidx_base + i * QDMA_DMAP_REG_STRIDE; + q->cidx_reg = QDMA_REG_OFF(qdev, QDMA_REGO_INTR_CIDX) + + i * QDMA_DMAP_REG_STRIDE; + q->vchan.desc_free = qdma_free_vdesc; + vchan_init(&q->vchan, &qdev->dma_dev); + } + + return 0; +} + +static int qdma_device_verify(struct qdma_device *qdev) +{ + u32 value; + int ret; + + ret = regmap_read(qdev->regmap, QDMA_IDENTIFIER_REGOFF, &value); + if (ret) + return ret; + + value = FIELD_GET(QDMA_IDENTIFIER_MASK, value); + if (value != QDMA_IDENTIFIER) { + qdma_err(qdev, "Invalid identifier"); + return -ENODEV; + } + qdev->rfields = qdma_regfs_default; + qdev->roffs = qdma_regos_default; + + return 0; +} + +static int qdma_device_setup(struct qdma_device *qdev) +{ + struct device *dev = &qdev->pdev->dev; + u32 ring_sz = QDMA_DEFAULT_RING_SIZE; + int ret = 0; + + while (dev && get_dma_ops(dev)) + dev = dev->parent; + if (!dev) { + qdma_err(qdev, "dma device not found"); + return -EINVAL; + } + set_dma_ops(&qdev->pdev->dev, get_dma_ops(dev)); + + ret = qdma_setup_fmap_context(qdev); + if (ret) { + qdma_err(qdev, "Failed setup fmap context"); + return ret; + } + + /* Setup global ring buffer size at QDMA_DEFAULT_RING_ID index */ + ret = qdma_reg_write(qdev, &ring_sz, QDMA_REGO_RING_SIZE); + if (ret) { + qdma_err(qdev, "Failed to setup ring %d of size %ld", + QDMA_DEFAULT_RING_ID, QDMA_DEFAULT_RING_SIZE); + return ret; + } + + /* Enable memory-mapped DMA engine in both directions */ + ret = qdma_sgdma_control(qdev, 1); + if (ret) { + qdma_err(qdev, "Failed to SGDMA with error %d", ret); + return ret; + } + + ret = qdma_alloc_queues(qdev, DMA_MEM_TO_DEV); + if (ret) { + qdma_err(qdev, "Failed to alloc H2C queues, ret %d", ret); + return ret; + } + + ret = qdma_alloc_queues(qdev, DMA_DEV_TO_MEM); + if (ret) { + qdma_err(qdev, "Failed to alloc C2H queues, ret %d", ret); + return ret; + } + + return 0; +} + +/** + * qdma_free_queue_resources() - Free queue resources + * @chan: DMA channel + */ +static void qdma_free_queue_resources(struct dma_chan *chan) +{ + struct qdma_queue *queue = to_qdma_queue(chan); + struct qdma_device *qdev = queue->qdev; + struct device *dev = qdev->dma_dev.dev; + + qdma_clear_queue_context(queue); + vchan_free_chan_resources(&queue->vchan); + dma_free_coherent(dev, queue->ring_size * QDMA_MM_DESC_SIZE, + queue->desc_base, queue->dma_desc_base); +} + +/** + * qdma_alloc_queue_resources() - Allocate queue resources + * @chan: DMA channel + */ +static int qdma_alloc_queue_resources(struct dma_chan *chan) +{ + struct qdma_queue *queue = to_qdma_queue(chan); + struct qdma_device *qdev = queue->qdev; + struct qdma_ctxt_sw_desc desc; + size_t size; + int ret; + + ret = qdma_clear_queue_context(queue); + if (ret) + return ret; + + size = queue->ring_size * QDMA_MM_DESC_SIZE; + queue->desc_base = dma_alloc_coherent(qdev->dma_dev.dev, size, + &queue->dma_desc_base, + GFP_KERNEL); + if (!queue->desc_base) { + qdma_err(qdev, "Failed to allocate descriptor ring"); + return -ENOMEM; + } + + /* Setup SW descriptor queue context for DMA memory map */ + desc.vec = qdma_get_intr_ring_idx(qdev); + desc.desc_base = queue->dma_desc_base; + ret = qdma_setup_queue_context(qdev, &desc, queue->dir, queue->qid); + if (ret) { + qdma_err(qdev, "Failed to setup SW desc ctxt for %s", + chan->name); + dma_free_coherent(qdev->dma_dev.dev, size, queue->desc_base, + queue->dma_desc_base); + return ret; + } + + queue->pidx = 0; + queue->cidx = 0; + + return 0; +} + +static bool qdma_filter_fn(struct dma_chan *chan, void *param) +{ + struct qdma_queue *queue = to_qdma_queue(chan); + struct qdma_queue_info *info = param; + + return info->dir == queue->dir; +} + +static int qdma_xfer_start(struct qdma_queue *queue) +{ + struct qdma_device *qdev = queue->qdev; + int ret; + + if (!vchan_next_desc(&queue->vchan)) + return 0; + + qdma_dbg(qdev, "Tnx kickoff with P: %d for %s%d", + queue->issued_vdesc->pidx, CHAN_STR(queue), queue->qid); + + ret = qdma_update_pidx(queue, queue->issued_vdesc->pidx); + if (ret) { + qdma_err(qdev, "Failed to update PIDX to %d for %s queue: %d", + queue->pidx, CHAN_STR(queue), queue->qid); + } + + return ret; +} + +static void qdma_issue_pending(struct dma_chan *chan) +{ + struct qdma_queue *queue = to_qdma_queue(chan); + unsigned long flags; + + spin_lock_irqsave(&queue->vchan.lock, flags); + if (vchan_issue_pending(&queue->vchan)) { + if (queue->submitted_vdesc) { + queue->issued_vdesc = queue->submitted_vdesc; + queue->submitted_vdesc = NULL; + } + qdma_xfer_start(queue); + } + + spin_unlock_irqrestore(&queue->vchan.lock, flags); +} + +static struct qdma_mm_desc *qdma_get_desc(struct qdma_queue *q) +{ + struct qdma_mm_desc *desc; + + if (((q->pidx + 1) & q->idx_mask) == q->cidx) + return NULL; + + desc = q->desc_base + q->pidx; + q->pidx = (q->pidx + 1) & q->idx_mask; + + return desc; +} + +static int qdma_hw_enqueue(struct qdma_queue *q, struct qdma_mm_vdesc *vdesc) +{ + struct qdma_mm_desc *desc; + struct scatterlist *sg; + u64 addr, *src, *dst; + u32 rest, len; + int ret = 0; + u32 i; + + if (!vdesc->sg_len) + return 0; + + if (q->dir == DMA_MEM_TO_DEV) { + dst = &vdesc->dev_addr; + src = &addr; + } else { + dst = &addr; + src = &vdesc->dev_addr; + } + + for_each_sg(vdesc->sgl, sg, vdesc->sg_len, i) { + addr = sg_dma_address(sg) + vdesc->sg_off; + rest = sg_dma_len(sg) - vdesc->sg_off; + while (rest) { + len = min_t(u32, rest, QDMA_MM_DESC_MAX_LEN); + desc = qdma_get_desc(q); + if (!desc) { + ret = -EBUSY; + goto out; + } + + desc->src_addr = cpu_to_le64(*src); + desc->dst_addr = cpu_to_le64(*dst); + desc->len = cpu_to_le32(len); + + vdesc->dev_addr += len; + vdesc->sg_off += len; + vdesc->pending_descs++; + addr += len; + rest -= len; + } + vdesc->sg_off = 0; + } +out: + vdesc->sg_len -= i; + vdesc->pidx = q->pidx; + return ret; +} + +static void qdma_fill_pending_vdesc(struct qdma_queue *q) +{ + struct virt_dma_chan *vc = &q->vchan; + struct qdma_mm_vdesc *vdesc = NULL; + struct virt_dma_desc *vd; + int ret; + + if (!list_empty(&vc->desc_issued)) { + vd = &q->issued_vdesc->vdesc; + list_for_each_entry_from(vd, &vc->desc_issued, node) { + vdesc = to_qdma_vdesc(vd); + ret = qdma_hw_enqueue(q, vdesc); + if (ret) { + q->issued_vdesc = vdesc; + return; + } + } + q->issued_vdesc = vdesc; + } + + if (list_empty(&vc->desc_submitted)) + return; + + if (q->submitted_vdesc) + vd = &q->submitted_vdesc->vdesc; + else + vd = list_first_entry(&vc->desc_submitted, typeof(*vd), node); + + list_for_each_entry_from(vd, &vc->desc_submitted, node) { + vdesc = to_qdma_vdesc(vd); + ret = qdma_hw_enqueue(q, vdesc); + if (ret) + break; + } + q->submitted_vdesc = vdesc; +} + +static dma_cookie_t qdma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct virt_dma_chan *vc = to_virt_chan(tx->chan); + struct qdma_queue *q = to_qdma_queue(&vc->chan); + struct virt_dma_desc *vd; + unsigned long flags; + dma_cookie_t cookie; + + vd = container_of(tx, struct virt_dma_desc, tx); + spin_lock_irqsave(&vc->lock, flags); + cookie = dma_cookie_assign(tx); + + list_move_tail(&vd->node, &vc->desc_submitted); + qdma_fill_pending_vdesc(q); + spin_unlock_irqrestore(&vc->lock, flags); + + return cookie; +} + +static struct dma_async_tx_descriptor * +qdma_prep_device_sg(struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction dir, + unsigned long flags, void *context) +{ + struct qdma_queue *q = to_qdma_queue(chan); + struct dma_async_tx_descriptor *tx; + struct qdma_mm_vdesc *vdesc; + + vdesc = kzalloc(sizeof(*vdesc), GFP_NOWAIT); + if (!vdesc) + return NULL; + vdesc->sgl = sgl; + vdesc->sg_len = sg_len; + if (dir == DMA_MEM_TO_DEV) + vdesc->dev_addr = q->cfg.dst_addr; + else + vdesc->dev_addr = q->cfg.src_addr; + + tx = vchan_tx_prep(&q->vchan, &vdesc->vdesc, flags); + tx->tx_submit = qdma_tx_submit; + + return tx; +} + +static int qdma_device_config(struct dma_chan *chan, + struct dma_slave_config *cfg) +{ + struct qdma_queue *q = to_qdma_queue(chan); + + memcpy(&q->cfg, cfg, sizeof(*cfg)); + + return 0; +} + +static int qdma_arm_err_intr(const struct qdma_device *qdev) +{ + u32 value = 0; + + qdma_set_field(qdev, &value, QDMA_REGF_ERR_INT_FUNC, qdev->fid); + qdma_set_field(qdev, &value, QDMA_REGF_ERR_INT_VEC, qdev->err_irq_idx); + qdma_set_field(qdev, &value, QDMA_REGF_ERR_INT_ARM, 1); + + return qdma_reg_write(qdev, &value, QDMA_REGO_ERR_INT); +} + +static irqreturn_t qdma_error_isr(int irq, void *data) +{ + struct qdma_device *qdev = data; + u32 err_stat = 0; + int ret; + + ret = qdma_reg_read(qdev, &err_stat, QDMA_REGO_ERR_STAT); + if (ret) { + qdma_err(qdev, "read error state failed, ret %d", ret); + goto out; + } + + qdma_err(qdev, "global error %d", err_stat); + ret = qdma_reg_write(qdev, &err_stat, QDMA_REGO_ERR_STAT); + if (ret) + qdma_err(qdev, "clear error state failed, ret %d", ret); + +out: + qdma_arm_err_intr(qdev); + return IRQ_HANDLED; +} + +static irqreturn_t qdma_queue_isr(int irq, void *data) +{ + struct qdma_intr_ring *intr = data; + struct qdma_queue *q = NULL; + struct qdma_device *qdev; + u32 index, comp_desc; + u64 intr_ent; + u8 color; + int ret; + u16 qid; + + qdev = intr->qdev; + index = intr->cidx; + while (1) { + struct virt_dma_desc *vd; + struct qdma_mm_vdesc *vdesc; + unsigned long flags; + u32 cidx; + + intr_ent = le64_to_cpu(intr->base[index]); + color = FIELD_GET(QDMA_INTR_MASK_COLOR, intr_ent); + if (color != intr->color) + break; + + qid = FIELD_GET(QDMA_INTR_MASK_QID, intr_ent); + if (FIELD_GET(QDMA_INTR_MASK_TYPE, intr_ent)) + q = qdev->c2h_queues; + else + q = qdev->h2c_queues; + q += qid; + + cidx = FIELD_GET(QDMA_INTR_MASK_CIDX, intr_ent); + + spin_lock_irqsave(&q->vchan.lock, flags); + comp_desc = (cidx - q->cidx) & q->idx_mask; + + vd = vchan_next_desc(&q->vchan); + if (!vd) + goto skip; + + vdesc = to_qdma_vdesc(vd); + while (comp_desc > vdesc->pending_descs) { + list_del(&vd->node); + vchan_cookie_complete(vd); + comp_desc -= vdesc->pending_descs; + vd = vchan_next_desc(&q->vchan); + vdesc = to_qdma_vdesc(vd); + } + vdesc->pending_descs -= comp_desc; + if (!vdesc->pending_descs && QDMA_VDESC_QUEUED(vdesc)) { + list_del(&vd->node); + vchan_cookie_complete(vd); + } + q->cidx = cidx; + + qdma_fill_pending_vdesc(q); + qdma_xfer_start(q); + +skip: + spin_unlock_irqrestore(&q->vchan.lock, flags); + + /* + * Wrap the index value and flip the expected color value if + * interrupt aggregation PIDX has wrapped around. + */ + index++; + index &= QDMA_INTR_RING_IDX_MASK; + if (!index) + intr->color = !intr->color; + } + + /* + * Update the software interrupt aggregation ring CIDX if a valid entry + * was found. + */ + if (q) { + qdma_dbg(qdev, "update intr ring%d %d", intr->ridx, index); + + /* + * Record the last read index of status descriptor from the + * interrupt aggregation ring. + */ + intr->cidx = index; + + ret = qdma_update_cidx(q, intr->ridx, index); + if (ret) { + qdma_err(qdev, "Failed to update IRQ CIDX"); + return IRQ_NONE; + } + } + + return IRQ_HANDLED; +} + +static int qdma_init_error_irq(struct qdma_device *qdev) +{ + struct device *dev = &qdev->pdev->dev; + int ret; + u32 vec; + + vec = qdev->queue_irq_start - 1; + + ret = devm_request_threaded_irq(dev, vec, NULL, qdma_error_isr, + IRQF_ONESHOT, "amd-qdma-error", qdev); + if (ret) { + qdma_err(qdev, "Failed to request error IRQ vector: %d", vec); + return ret; + } + + ret = qdma_arm_err_intr(qdev); + if (ret) + qdma_err(qdev, "Failed to arm err interrupt, ret %d", ret); + + return ret; +} + +static int qdmam_alloc_qintr_rings(struct qdma_device *qdev) +{ + u32 ctxt[QDMA_CTXT_REGMAP_LEN]; + struct device *dev = &qdev->pdev->dev; + struct qdma_intr_ring *ring; + struct qdma_ctxt_intr intr_ctxt; + u32 vector; + int ret, i; + + qdev->qintr_ring_num = qdev->queue_irq_num; + qdev->qintr_rings = devm_kcalloc(dev, qdev->qintr_ring_num, + sizeof(*qdev->qintr_rings), + GFP_KERNEL); + if (!qdev->qintr_rings) + return -ENOMEM; + + vector = qdev->queue_irq_start; + for (i = 0; i < qdev->qintr_ring_num; i++, vector++) { + ring = &qdev->qintr_rings[i]; + ring->qdev = qdev; + ring->msix_id = qdev->err_irq_idx + i + 1; + ring->ridx = i; + ring->color = 1; + ring->base = dmam_alloc_coherent(dev, QDMA_INTR_RING_SIZE, + &ring->dev_base, GFP_KERNEL); + if (!ring->base) { + qdma_err(qdev, "Failed to alloc intr ring %d", i); + return -ENOMEM; + } + intr_ctxt.agg_base = QDMA_INTR_RING_BASE(ring->dev_base); + intr_ctxt.size = (QDMA_INTR_RING_SIZE - 1) / 4096; + intr_ctxt.vec = ring->msix_id; + intr_ctxt.valid = true; + intr_ctxt.color = true; + ret = qdma_prog_context(qdev, QDMA_CTXT_INTR_COAL, + QDMA_CTXT_CLEAR, ring->ridx, NULL); + if (ret) { + qdma_err(qdev, "Failed clear intr ctx, ret %d", ret); + return ret; + } + + qdma_prep_intr_context(qdev, &intr_ctxt, ctxt); + ret = qdma_prog_context(qdev, QDMA_CTXT_INTR_COAL, + QDMA_CTXT_WRITE, ring->ridx, ctxt); + if (ret) { + qdma_err(qdev, "Failed setup intr ctx, ret %d", ret); + return ret; + } + + ret = devm_request_threaded_irq(dev, vector, NULL, + qdma_queue_isr, IRQF_ONESHOT, + "amd-qdma-queue", ring); + if (ret) { + qdma_err(qdev, "Failed to request irq %d", vector); + return ret; + } + } + + return 0; +} + +static int qdma_intr_init(struct qdma_device *qdev) +{ + int ret; + + ret = qdma_init_error_irq(qdev); + if (ret) { + qdma_err(qdev, "Failed to init error IRQs, ret %d", ret); + return ret; + } + + ret = qdmam_alloc_qintr_rings(qdev); + if (ret) { + qdma_err(qdev, "Failed to init queue IRQs, ret %d", ret); + return ret; + } + + return 0; +} + +static void amd_qdma_remove(struct platform_device *pdev) +{ + struct qdma_device *qdev = platform_get_drvdata(pdev); + + qdma_sgdma_control(qdev, 0); + dma_async_device_unregister(&qdev->dma_dev); + + mutex_destroy(&qdev->ctxt_lock); +} + +static int amd_qdma_probe(struct platform_device *pdev) +{ + struct qdma_platdata *pdata = dev_get_platdata(&pdev->dev); + struct qdma_device *qdev; + struct resource *res; + void __iomem *regs; + int ret; + + qdev = devm_kzalloc(&pdev->dev, sizeof(*qdev), GFP_KERNEL); + if (!qdev) + return -ENOMEM; + + platform_set_drvdata(pdev, qdev); + qdev->pdev = pdev; + mutex_init(&qdev->ctxt_lock); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + qdma_err(qdev, "Failed to get IRQ resource"); + ret = -ENODEV; + goto failed; + } + qdev->err_irq_idx = pdata->irq_index; + qdev->queue_irq_start = res->start + 1; + qdev->queue_irq_num = resource_size(res) - 1; + + regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + qdma_err(qdev, "Failed to map IO resource, err %d", ret); + goto failed; + } + + qdev->regmap = devm_regmap_init_mmio(&pdev->dev, regs, + &qdma_regmap_config); + if (IS_ERR(qdev->regmap)) { + ret = PTR_ERR(qdev->regmap); + qdma_err(qdev, "Regmap init failed, err %d", ret); + goto failed; + } + + ret = qdma_device_verify(qdev); + if (ret) + goto failed; + + ret = qdma_get_hw_info(qdev); + if (ret) + goto failed; + + INIT_LIST_HEAD(&qdev->dma_dev.channels); + + ret = qdma_device_setup(qdev); + if (ret) + goto failed; + + ret = qdma_intr_init(qdev); + if (ret) { + qdma_err(qdev, "Failed to initialize IRQs %d", ret); + goto failed_disable_engine; + } + + dma_cap_set(DMA_SLAVE, qdev->dma_dev.cap_mask); + dma_cap_set(DMA_PRIVATE, qdev->dma_dev.cap_mask); + + qdev->dma_dev.dev = &pdev->dev; + qdev->dma_dev.filter.map = pdata->device_map; + qdev->dma_dev.filter.mapcnt = qdev->chan_num * 2; + qdev->dma_dev.filter.fn = qdma_filter_fn; + qdev->dma_dev.device_alloc_chan_resources = qdma_alloc_queue_resources; + qdev->dma_dev.device_free_chan_resources = qdma_free_queue_resources; + qdev->dma_dev.device_prep_slave_sg = qdma_prep_device_sg; + qdev->dma_dev.device_config = qdma_device_config; + qdev->dma_dev.device_issue_pending = qdma_issue_pending; + qdev->dma_dev.device_tx_status = dma_cookie_status; + qdev->dma_dev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + + ret = dma_async_device_register(&qdev->dma_dev); + if (ret) { + qdma_err(qdev, "Failed to register AMD QDMA: %d", ret); + goto failed_disable_engine; + } + + return 0; + +failed_disable_engine: + qdma_sgdma_control(qdev, 0); +failed: + mutex_destroy(&qdev->ctxt_lock); + qdma_err(qdev, "Failed to probe AMD QDMA driver"); + return ret; +} + +static struct platform_driver amd_qdma_driver = { + .driver = { + .name = "amd-qdma", + }, + .probe = amd_qdma_probe, + .remove_new = amd_qdma_remove, +}; + +module_platform_driver(amd_qdma_driver); + +MODULE_DESCRIPTION("AMD QDMA driver"); +MODULE_AUTHOR("XRT Team "); +MODULE_LICENSE("GPL"); diff --git a/drivers/dma/amd/qdma/qdma.h b/drivers/dma/amd/qdma/qdma.h new file mode 100644 index 000000000000..94089f1f0c11 --- /dev/null +++ b/drivers/dma/amd/qdma/qdma.h @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * DMA header for AMD Queue-based DMA Subsystem + * + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ + +#ifndef __QDMA_H +#define __QDMA_H + +#include +#include +#include +#include +#include + +#include "../../virt-dma.h" + +#define DISABLE 0 +#define ENABLE 1 + +#define QDMA_MIN_IRQ 3 +#define QDMA_INTR_NAME_MAX_LEN 30 +#define QDMA_INTR_PREFIX "amd-qdma" + +#define QDMA_IDENTIFIER 0x1FD3 +#define QDMA_DEFAULT_RING_SIZE (BIT(10) + 1) +#define QDMA_DEFAULT_RING_ID 0 +#define QDMA_POLL_INTRVL_US 10 /* 10us */ +#define QDMA_POLL_TIMEOUT_US (500 * 1000) /* 500ms */ +#define QDMA_DMAP_REG_STRIDE 16 +#define QDMA_CTXT_REGMAP_LEN 8 /* 8 regs */ +#define QDMA_MM_DESC_SIZE 32 /* Bytes */ +#define QDMA_MM_DESC_LEN_BITS 28 +#define QDMA_MM_DESC_MAX_LEN (BIT(QDMA_MM_DESC_LEN_BITS) - 1) +#define QDMA_MIN_DMA_ALLOC_SIZE 4096 +#define QDMA_INTR_RING_SIZE BIT(13) +#define QDMA_INTR_RING_IDX_MASK GENMASK(9, 0) +#define QDMA_INTR_RING_BASE(_addr) ((_addr) >> 12) + +#define QDMA_IDENTIFIER_REGOFF 0x0 +#define QDMA_IDENTIFIER_MASK GENMASK(31, 16) +#define QDMA_QUEUE_ARM_BIT BIT(16) + +#define qdma_err(qdev, fmt, args...) \ + dev_err(&(qdev)->pdev->dev, fmt, ##args) + +#define qdma_dbg(qdev, fmt, args...) \ + dev_dbg(&(qdev)->pdev->dev, fmt, ##args) + +#define qdma_info(qdev, fmt, args...) \ + dev_info(&(qdev)->pdev->dev, fmt, ##args) + +enum qdma_reg_fields { + QDMA_REGF_IRQ_ENABLE, + QDMA_REGF_WBK_ENABLE, + QDMA_REGF_WBI_CHECK, + QDMA_REGF_IRQ_ARM, + QDMA_REGF_IRQ_VEC, + QDMA_REGF_IRQ_AGG, + QDMA_REGF_WBI_INTVL_ENABLE, + QDMA_REGF_MRKR_DISABLE, + QDMA_REGF_QUEUE_ENABLE, + QDMA_REGF_QUEUE_MODE, + QDMA_REGF_DESC_BASE, + QDMA_REGF_DESC_SIZE, + QDMA_REGF_RING_ID, + QDMA_REGF_CMD_INDX, + QDMA_REGF_CMD_CMD, + QDMA_REGF_CMD_TYPE, + QDMA_REGF_CMD_BUSY, + QDMA_REGF_QUEUE_COUNT, + QDMA_REGF_QUEUE_MAX, + QDMA_REGF_QUEUE_BASE, + QDMA_REGF_FUNCTION_ID, + QDMA_REGF_INTR_AGG_BASE, + QDMA_REGF_INTR_VECTOR, + QDMA_REGF_INTR_SIZE, + QDMA_REGF_INTR_VALID, + QDMA_REGF_INTR_COLOR, + QDMA_REGF_INTR_FUNCTION_ID, + QDMA_REGF_ERR_INT_FUNC, + QDMA_REGF_ERR_INT_VEC, + QDMA_REGF_ERR_INT_ARM, + QDMA_REGF_MAX +}; + +enum qdma_regs { + QDMA_REGO_CTXT_DATA, + QDMA_REGO_CTXT_CMD, + QDMA_REGO_CTXT_MASK, + QDMA_REGO_MM_H2C_CTRL, + QDMA_REGO_MM_C2H_CTRL, + QDMA_REGO_QUEUE_COUNT, + QDMA_REGO_RING_SIZE, + QDMA_REGO_H2C_PIDX, + QDMA_REGO_C2H_PIDX, + QDMA_REGO_INTR_CIDX, + QDMA_REGO_FUNC_ID, + QDMA_REGO_ERR_INT, + QDMA_REGO_ERR_STAT, + QDMA_REGO_MAX +}; + +struct qdma_reg_field { + u16 lsb; /* Least significant bit of field */ + u16 msb; /* Most significant bit of field */ +}; + +struct qdma_reg { + u32 off; + u32 count; +}; + +#define QDMA_REGF(_msb, _lsb) { \ + .lsb = (_lsb), \ + .msb = (_msb), \ +} + +#define QDMA_REGO(_off, _count) { \ + .off = (_off), \ + .count = (_count), \ +} + +enum qdma_desc_size { + QDMA_DESC_SIZE_8B, + QDMA_DESC_SIZE_16B, + QDMA_DESC_SIZE_32B, + QDMA_DESC_SIZE_64B, +}; + +enum qdma_queue_op_mode { + QDMA_QUEUE_OP_STREAM, + QDMA_QUEUE_OP_MM, +}; + +enum qdma_ctxt_type { + QDMA_CTXT_DESC_SW_C2H, + QDMA_CTXT_DESC_SW_H2C, + QDMA_CTXT_DESC_HW_C2H, + QDMA_CTXT_DESC_HW_H2C, + QDMA_CTXT_DESC_CR_C2H, + QDMA_CTXT_DESC_CR_H2C, + QDMA_CTXT_WRB, + QDMA_CTXT_PFTCH, + QDMA_CTXT_INTR_COAL, + QDMA_CTXT_RSVD, + QDMA_CTXT_HOST_PROFILE, + QDMA_CTXT_TIMER, + QDMA_CTXT_FMAP, + QDMA_CTXT_FNC_STS, +}; + +enum qdma_ctxt_cmd { + QDMA_CTXT_CLEAR, + QDMA_CTXT_WRITE, + QDMA_CTXT_READ, + QDMA_CTXT_INVALIDATE, + QDMA_CTXT_MAX +}; + +struct qdma_ctxt_sw_desc { + u64 desc_base; + u16 vec; +}; + +struct qdma_ctxt_intr { + u64 agg_base; + u16 vec; + u32 size; + bool valid; + bool color; +}; + +struct qdma_ctxt_fmap { + u16 qbase; + u16 qmax; +}; + +struct qdma_device; + +struct qdma_mm_desc { + __le64 src_addr; + __le32 len; + __le32 reserved1; + __le64 dst_addr; + __le64 reserved2; +} __packed; + +struct qdma_mm_vdesc { + struct virt_dma_desc vdesc; + struct qdma_queue *queue; + struct scatterlist *sgl; + u64 sg_off; + u32 sg_len; + u64 dev_addr; + u32 pidx; + u32 pending_descs; + struct dma_slave_config cfg; +}; + +#define QDMA_VDESC_QUEUED(vdesc) (!(vdesc)->sg_len) + +struct qdma_queue { + struct qdma_device *qdev; + struct virt_dma_chan vchan; + enum dma_transfer_direction dir; + struct dma_slave_config cfg; + struct qdma_mm_desc *desc_base; + struct qdma_mm_vdesc *submitted_vdesc; + struct qdma_mm_vdesc *issued_vdesc; + dma_addr_t dma_desc_base; + u32 pidx_reg; + u32 cidx_reg; + u32 ring_size; + u32 idx_mask; + u16 qid; + u32 pidx; + u32 cidx; +}; + +struct qdma_intr_ring { + struct qdma_device *qdev; + __le64 *base; + dma_addr_t dev_base; + char msix_name[QDMA_INTR_NAME_MAX_LEN]; + u32 msix_vector; + u16 msix_id; + u32 ring_size; + u16 ridx; + u16 cidx; + u8 color; +}; + +#define QDMA_INTR_MASK_PIDX GENMASK_ULL(15, 0) +#define QDMA_INTR_MASK_CIDX GENMASK_ULL(31, 16) +#define QDMA_INTR_MASK_DESC_COLOR GENMASK_ULL(32, 32) +#define QDMA_INTR_MASK_STATE GENMASK_ULL(34, 33) +#define QDMA_INTR_MASK_ERROR GENMASK_ULL(36, 35) +#define QDMA_INTR_MASK_TYPE GENMASK_ULL(38, 38) +#define QDMA_INTR_MASK_QID GENMASK_ULL(62, 39) +#define QDMA_INTR_MASK_COLOR GENMASK_ULL(63, 63) + +struct qdma_device { + struct platform_device *pdev; + struct dma_device dma_dev; + struct regmap *regmap; + struct mutex ctxt_lock; /* protect ctxt registers */ + const struct qdma_reg_field *rfields; + const struct qdma_reg *roffs; + struct qdma_queue *h2c_queues; + struct qdma_queue *c2h_queues; + struct qdma_intr_ring *qintr_rings; + u32 qintr_ring_num; + u32 qintr_ring_idx; + u32 chan_num; + u32 queue_irq_start; + u32 queue_irq_num; + u32 err_irq_idx; + u32 fid; +}; + +extern const struct qdma_reg qdma_regos_default[QDMA_REGO_MAX]; +extern const struct qdma_reg_field qdma_regfs_default[QDMA_REGF_MAX]; + +#endif /* __QDMA_H */ diff --git a/include/linux/platform_data/amd_qdma.h b/include/linux/platform_data/amd_qdma.h new file mode 100644 index 000000000000..576d952f97ed --- /dev/null +++ b/include/linux/platform_data/amd_qdma.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2023-2024, Advanced Micro Devices, Inc. + */ + +#ifndef _PLATDATA_AMD_QDMA_H +#define _PLATDATA_AMD_QDMA_H + +#include + +/** + * struct qdma_queue_info - DMA queue information. This information is used to + * match queue when DMA channel is requested + * @dir: Channel transfer direction + */ +struct qdma_queue_info { + enum dma_transfer_direction dir; +}; + +#define QDMA_FILTER_PARAM(qinfo) ((void *)(qinfo)) + +struct dma_slave_map; + +/** + * struct qdma_platdata - Platform specific data for QDMA engine + * @max_mm_channels: Maximum number of MM DMA channels in each direction + * @device_map: DMA slave map + * @irq_index: The index of first IRQ + */ +struct qdma_platdata { + u32 max_mm_channels; + u32 irq_index; + struct dma_slave_map *device_map; +}; + +#endif /* _PLATDATA_AMD_QDMA_H */ -- cgit v1.2.3 From c4a315eaf8eff0d3234600e13db7e7c71c0b3405 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 21 Aug 2024 14:14:56 +0200 Subject: gpio: ath79: remove support for platform data There are no more board files defining platform data for this driver so remove the header and support from the driver. Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-ath79.c | 22 ++++++---------------- include/linux/platform_data/gpio-ath79.h | 16 ---------------- 2 files changed, 6 insertions(+), 32 deletions(-) delete mode 100644 include/linux/platform_data/gpio-ath79.h (limited to 'include/linux/platform_data') diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c index 211faffbef32..de4cc12e5e03 100644 --- a/drivers/gpio/gpio-ath79.c +++ b/drivers/gpio/gpio-ath79.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #define AR71XX_GPIO_REG_OE 0x00 @@ -225,9 +224,7 @@ MODULE_DEVICE_TABLE(of, ath79_gpio_of_match); static int ath79_gpio_probe(struct platform_device *pdev) { - struct ath79_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; struct ath79_gpio_ctrl *ctrl; struct gpio_irq_chip *girq; u32 ath79_gpio_count; @@ -238,21 +235,14 @@ static int ath79_gpio_probe(struct platform_device *pdev) if (!ctrl) return -ENOMEM; - if (np) { - err = device_property_read_u32(dev, "ngpios", &ath79_gpio_count); - if (err) { - dev_err(dev, "ngpios property is not valid\n"); - return err; - } - oe_inverted = device_is_compatible(dev, "qca,ar9340-gpio"); - } else if (pdata) { - ath79_gpio_count = pdata->ngpios; - oe_inverted = pdata->oe_inverted; - } else { - dev_err(dev, "No DT node or platform data found\n"); - return -EINVAL; + err = device_property_read_u32(dev, "ngpios", &ath79_gpio_count); + if (err) { + dev_err(dev, "ngpios property is not valid\n"); + return err; } + oe_inverted = device_is_compatible(dev, "qca,ar9340-gpio"); + if (ath79_gpio_count >= 32) { dev_err(dev, "ngpios must be less than 32\n"); return -EINVAL; diff --git a/include/linux/platform_data/gpio-ath79.h b/include/linux/platform_data/gpio-ath79.h deleted file mode 100644 index 3ea6dd942c27..000000000000 --- a/include/linux/platform_data/gpio-ath79.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Atheros AR7XXX/AR9XXX GPIO controller platform data - * - * Copyright (C) 2015 Alban Bedel - */ - -#ifndef __LINUX_PLATFORM_DATA_GPIO_ATH79_H -#define __LINUX_PLATFORM_DATA_GPIO_ATH79_H - -struct ath79_gpio_platform_data { - unsigned ngpios; - bool oe_inverted; -}; - -#endif -- cgit v1.2.3 From 631598c419985327110135efb696d9f9fe67bffd Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 14 Aug 2024 11:26:29 +0200 Subject: iio: dac: ad5449: drop support for platform data There are no longer any users of the platform data struct. Remove support for it from the driver. Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20240814092629.9862-1-brgl@bgdev.pl Signed-off-by: Jonathan Cameron --- drivers/iio/dac/ad5449.c | 15 ++------------ include/linux/platform_data/ad5449.h | 39 ------------------------------------ 2 files changed, 2 insertions(+), 52 deletions(-) delete mode 100644 include/linux/platform_data/ad5449.h (limited to 'include/linux/platform_data') diff --git a/drivers/iio/dac/ad5449.c b/drivers/iio/dac/ad5449.c index 4572d6f49275..953fcfa2110b 100644 --- a/drivers/iio/dac/ad5449.c +++ b/drivers/iio/dac/ad5449.c @@ -20,8 +20,6 @@ #include #include -#include - #define AD5449_MAX_CHANNELS 2 #define AD5449_MAX_VREFS 2 @@ -268,7 +266,6 @@ static const char *ad5449_vref_name(struct ad5449 *st, int n) static int ad5449_spi_probe(struct spi_device *spi) { - struct ad5449_platform_data *pdata = spi->dev.platform_data; const struct spi_device_id *id = spi_get_device_id(spi); struct iio_dev *indio_dev; struct ad5449 *st; @@ -306,16 +303,8 @@ static int ad5449_spi_probe(struct spi_device *spi) mutex_init(&st->lock); if (st->chip_info->has_ctrl) { - unsigned int ctrl = 0x00; - if (pdata) { - if (pdata->hardware_clear_to_midscale) - ctrl |= AD5449_CTRL_HCLR_TO_MIDSCALE; - ctrl |= pdata->sdo_mode << AD5449_CTRL_SDO_OFFSET; - st->has_sdo = pdata->sdo_mode != AD5449_SDO_DISABLED; - } else { - st->has_sdo = true; - } - ad5449_write(indio_dev, AD5449_CMD_CTRL, ctrl); + st->has_sdo = true; + ad5449_write(indio_dev, AD5449_CMD_CTRL, 0x0); } ret = iio_device_register(indio_dev); diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h deleted file mode 100644 index d687ef5726c2..000000000000 --- a/include/linux/platform_data/ad5449.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog - * Converter driver. - * - * Copyright 2012 Analog Devices Inc. - * Author: Lars-Peter Clausen - */ - -#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ -#define __LINUX_PLATFORM_DATA_AD5449_H__ - -/** - * enum ad5449_sdo_mode - AD5449 SDO pin configuration - * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. - * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. - * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. - * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to - * read back from the device. - */ -enum ad5449_sdo_mode { - AD5449_SDO_DRIVE_FULL = 0x0, - AD5449_SDO_DRIVE_WEAK = 0x1, - AD5449_SDO_OPEN_DRAIN = 0x2, - AD5449_SDO_DISABLED = 0x3, -}; - -/** - * struct ad5449_platform_data - Platform data for the ad5449 DAC driver - * @sdo_mode: SDO pin mode - * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the - * outputs to midscale (true) or to zero scale(false). - */ -struct ad5449_platform_data { - enum ad5449_sdo_mode sdo_mode; - bool hardware_clear_to_midscale; -}; - -#endif -- cgit v1.2.3 From d29e741cad3f8f41df1834bf74df79380c1c6c6d Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 19 Aug 2024 17:17:04 +0200 Subject: gpio: davinci: drop platform data support There are no more any board files that use the platform data for gpio-davinci. We can remove the header defining it and port the code to no longer store any context in pdata. Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20240819151705.37258-1-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-davinci.c | 89 +++++++++--------------------- include/linux/platform_data/gpio-davinci.h | 21 ------- 2 files changed, 25 insertions(+), 85 deletions(-) delete mode 100644 include/linux/platform_data/gpio-davinci.h (limited to 'include/linux/platform_data') diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index 1d0175d6350b..7763b99f814a 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -154,74 +153,37 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) value ? &g->set_data : &g->clr_data); } -static struct davinci_gpio_platform_data * -davinci_gpio_get_pdata(struct platform_device *pdev) -{ - struct device_node *dn = pdev->dev.of_node; - struct davinci_gpio_platform_data *pdata; - int ret; - u32 val; - - if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) - return dev_get_platdata(&pdev->dev); - - pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return NULL; - - ret = of_property_read_u32(dn, "ti,ngpio", &val); - if (ret) - goto of_err; - - pdata->ngpio = val; - - ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", &val); - if (ret) - goto of_err; - - pdata->gpio_unbanked = val; - - return pdata; - -of_err: - dev_err(&pdev->dev, "Populating pdata from DT failed: err %d\n", ret); - return NULL; -} - static int davinci_gpio_probe(struct platform_device *pdev) { int bank, i, ret = 0; - unsigned int ngpio, nbank, nirq; + unsigned int ngpio, nbank, nirq, gpio_unbanked; struct davinci_gpio_controller *chips; - struct davinci_gpio_platform_data *pdata; struct device *dev = &pdev->dev; - - pdata = davinci_gpio_get_pdata(pdev); - if (!pdata) { - dev_err(dev, "No platform data found\n"); - return -EINVAL; - } - - dev->platform_data = pdata; + struct device_node *dn = dev_of_node(dev); /* * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based * bit index that's valid. */ - ngpio = pdata->ngpio; - if (ngpio == 0) { - dev_err(dev, "How many GPIOs?\n"); - return -EINVAL; - } + ret = of_property_read_u32(dn, "ti,ngpio", &ngpio); + if (ret) + return dev_err_probe(dev, ret, "Failed to get the number of GPIOs\n"); + if (ngpio == 0) + return dev_err_probe(dev, -EINVAL, "How many GPIOs?\n"); /* * If there are unbanked interrupts then the number of * interrupts is equal to number of gpios else all are banked so * number of interrupts is equal to number of banks(each with 16 gpios) */ - if (pdata->gpio_unbanked) - nirq = pdata->gpio_unbanked; + ret = of_property_read_u32(dn, "ti,davinci-gpio-unbanked", + &gpio_unbanked); + if (ret) + return dev_err_probe(dev, ret, "Failed to get the unbanked GPIOs property\n"); + + if (gpio_unbanked) + nirq = gpio_unbanked; else nirq = DIV_ROUND_UP(ngpio, 16); @@ -252,7 +214,7 @@ static int davinci_gpio_probe(struct platform_device *pdev) chips->chip.set = davinci_gpio_set; chips->chip.ngpio = ngpio; - chips->chip.base = pdata->no_auto_base ? pdata->base : -1; + chips->chip.base = -1; #ifdef CONFIG_OF_GPIO chips->chip.parent = dev; @@ -261,6 +223,8 @@ static int davinci_gpio_probe(struct platform_device *pdev) #endif spin_lock_init(&chips->lock); + chips->gpio_unbanked = gpio_unbanked; + nbank = DIV_ROUND_UP(ngpio, 32); for (bank = 0; bank < nbank; bank++) chips->regs[bank] = gpio_base + offset_array[bank]; @@ -488,7 +452,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) unsigned ngpio; struct device *dev = &pdev->dev; struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); - struct davinci_gpio_platform_data *pdata = dev->platform_data; struct davinci_gpio_regs __iomem *g; struct irq_domain *irq_domain = NULL; struct irq_chip *irq_chip; @@ -502,7 +465,7 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) if (dev->of_node) gpio_get_irq_chip = (gpio_get_irq_chip_cb_t)device_get_match_data(dev); - ngpio = pdata->ngpio; + ngpio = chips->chip.ngpio; clk = devm_clk_get(dev, "gpio"); if (IS_ERR(clk)) { @@ -514,7 +477,7 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) if (ret) return ret; - if (!pdata->gpio_unbanked) { + if (chips->gpio_unbanked) { irq = devm_irq_alloc_descs(dev, -1, 0, ngpio, 0); if (irq < 0) { dev_err(dev, "Couldn't allocate IRQ numbers\n"); @@ -546,11 +509,11 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) * controller only handling trigger modes. We currently assume no * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. */ - if (pdata->gpio_unbanked) { + if (chips->gpio_unbanked) { /* pass "bank 0" GPIO IRQs to AINTC */ chips->chip.to_irq = gpio_to_irq_unbanked; - chips->gpio_unbanked = pdata->gpio_unbanked; - binten = GENMASK(pdata->gpio_unbanked / 16, 0); + + binten = GENMASK(chips->gpio_unbanked / 16, 0); /* AINTC handles mask/unmask; GPIO handles triggering */ irq = chips->irqs[0]; @@ -564,7 +527,7 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev) writel_relaxed(~0, &g->set_rising); /* set the direct IRQs up to use that irqchip */ - for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++) { + for (gpio = 0; gpio < chips->gpio_unbanked; gpio++) { irq_set_chip(chips->irqs[gpio], irq_chip); irq_set_handler_data(chips->irqs[gpio], chips); irq_set_status_flags(chips->irqs[gpio], @@ -675,8 +638,7 @@ static void davinci_gpio_restore_context(struct davinci_gpio_controller *chips, static int davinci_gpio_suspend(struct device *dev) { struct davinci_gpio_controller *chips = dev_get_drvdata(dev); - struct davinci_gpio_platform_data *pdata = dev_get_platdata(dev); - u32 nbank = DIV_ROUND_UP(pdata->ngpio, 32); + u32 nbank = DIV_ROUND_UP(chips->chip.ngpio, 32); davinci_gpio_save_context(chips, nbank); @@ -686,8 +648,7 @@ static int davinci_gpio_suspend(struct device *dev) static int davinci_gpio_resume(struct device *dev) { struct davinci_gpio_controller *chips = dev_get_drvdata(dev); - struct davinci_gpio_platform_data *pdata = dev_get_platdata(dev); - u32 nbank = DIV_ROUND_UP(pdata->ngpio, 32); + u32 nbank = DIV_ROUND_UP(chips->chip.ngpio, 32); davinci_gpio_restore_context(chips, nbank); diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h deleted file mode 100644 index b82e44662efe..000000000000 --- a/include/linux/platform_data/gpio-davinci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * DaVinci GPIO Platform Related Defines - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#ifndef __DAVINCI_GPIO_PLATFORM_H -#define __DAVINCI_GPIO_PLATFORM_H - -struct davinci_gpio_platform_data { - bool no_auto_base; - u32 base; - u32 ngpio; - u32 gpio_unbanked; -}; - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -#endif -- cgit v1.2.3 From f820b43754cdbd078a0d17122b281f42cbcd2155 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 23 Aug 2024 22:50:27 -0700 Subject: Input: zforce_ts - remove support for platfrom data There are no in-tree users of platform data and any new ones should either use device tree or static device properties, so let's remove platform data support. Tested-by: Andreas Kemnade # Tolino Shine2HD Link: https://lore.kernel.org/r/20240824055047.1706392-4-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/zforce_ts.c | 56 ++++++++++----------------------- include/linux/platform_data/zforce_ts.h | 15 --------- 2 files changed, 16 insertions(+), 55 deletions(-) delete mode 100644 include/linux/platform_data/zforce_ts.h (limited to 'include/linux/platform_data') diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index 350cec8508a3..5a8f79b800e6 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -9,21 +9,19 @@ * Author: Pieter Truter */ -#include -#include -#include -#include -#include -#include #include -#include #include -#include +#include +#include +#include #include #include -#include -#include +#include +#include #include +#include +#include +#include #define WAIT_TIMEOUT msecs_to_jiffies(1000) @@ -108,7 +106,6 @@ struct zforce_ts { struct i2c_client *client; struct input_dev *input; struct touchscreen_properties prop; - const struct zforce_ts_platdata *pdata; char phys[32]; struct regulator *reg_vdd; @@ -702,39 +699,24 @@ static void zforce_reset(void *data) regulator_disable(ts->reg_vdd); } -static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) +static void zforce_ts_parse_legacy_properties(struct zforce_ts *ts) { - struct zforce_ts_platdata *pdata; - struct device_node *np = dev->of_node; - - if (!np) - return ERR_PTR(-ENOENT); + u32 x_max = 0; + u32 y_max = 0; - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) { - dev_err(dev, "failed to allocate platform data\n"); - return ERR_PTR(-ENOMEM); - } - - of_property_read_u32(np, "x-size", &pdata->x_max); - of_property_read_u32(np, "y-size", &pdata->y_max); + device_property_read_u32(&ts->client->dev, "x-size", &x_max); + input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, x_max, 0, 0); - return pdata; + device_property_read_u32(&ts->client->dev, "y-size", &y_max); + input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, y_max, 0, 0); } static int zforce_probe(struct i2c_client *client) { - const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev); struct zforce_ts *ts; struct input_dev *input_dev; int ret; - if (!pdata) { - pdata = zforce_parse_dt(&client->dev); - if (IS_ERR(pdata)) - return PTR_ERR(pdata); - } - ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL); if (!ts) return -ENOMEM; @@ -822,7 +804,6 @@ static int zforce_probe(struct i2c_client *client) mutex_init(&ts->access_mutex); mutex_init(&ts->command_mutex); - ts->pdata = pdata; ts->client = client; ts->input = input_dev; @@ -837,12 +818,7 @@ static int zforce_probe(struct i2c_client *client) __set_bit(EV_SYN, input_dev->evbit); __set_bit(EV_ABS, input_dev->evbit); - /* For multi touch */ - input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, - pdata->x_max, 0, 0); - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, - pdata->y_max, 0, 0); - + zforce_ts_parse_legacy_properties(ts); touchscreen_parse_properties(input_dev, true, &ts->prop); if (ts->prop.max_x == 0 || ts->prop.max_y == 0) { dev_err(&client->dev, "no size specified\n"); diff --git a/include/linux/platform_data/zforce_ts.h b/include/linux/platform_data/zforce_ts.h deleted file mode 100644 index 2463a4a856a6..000000000000 --- a/include/linux/platform_data/zforce_ts.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* drivers/input/touchscreen/zforce.c - * - * Copyright (C) 2012-2013 MundoReader S.L. - */ - -#ifndef _LINUX_INPUT_ZFORCE_TS_H -#define _LINUX_INPUT_ZFORCE_TS_H - -struct zforce_ts_platdata { - unsigned int x_max; - unsigned int y_max; -}; - -#endif /* _LINUX_INPUT_ZFORCE_TS_H */ -- cgit v1.2.3 From 23de126f9248a2f9218175ea0dd1c1403e334440 Mon Sep 17 00:00:00 2001 From: Pieter Van Trappen Date: Wed, 4 Sep 2024 08:27:42 +0200 Subject: net: dsa: microchip: replace unclear KSZ8830 strings Replace ksz8830 with ksz88x3 for CHIP_ID definition and other strings. This due to KSZ8830 not being an actual switch but the Chip ID shared among KSZ8863/8873 switches, impossible to differentiate from their Chip ID or Revision ID registers. Now all KSZ*_CHIP_ID macros refer to actual, existing switches which removes confusion. Signed-off-by: Pieter Van Trappen Acked-by: Arun Ramadoss Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8.c | 2 +- drivers/net/dsa/microchip/ksz8863_smi.c | 4 +-- drivers/net/dsa/microchip/ksz_common.c | 48 ++++++++++++++--------------- drivers/net/dsa/microchip/ksz_common.h | 4 +-- drivers/net/dsa/microchip/ksz_spi.c | 6 ++-- include/linux/platform_data/microchip-ksz.h | 2 +- 6 files changed, 33 insertions(+), 33 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c index 7af3c0853505..da7110d67558 100644 --- a/drivers/net/dsa/microchip/ksz8.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -194,7 +194,7 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return ksz8795_change_mtu(dev, frame_size); - case KSZ8830_CHIP_ID: + case KSZ88X3_CHIP_ID: case KSZ8864_CHIP_ID: case KSZ8895_CHIP_ID: return ksz8863_change_mtu(dev, frame_size); diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c index 5711a59e2ac9..a8bfcd917bf7 100644 --- a/drivers/net/dsa/microchip/ksz8863_smi.c +++ b/drivers/net/dsa/microchip/ksz8863_smi.c @@ -199,11 +199,11 @@ static void ksz8863_smi_shutdown(struct mdio_device *mdiodev) static const struct of_device_id ksz8863_dt_ids[] = { { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { }, }; diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index cd116de3ddb8..4e8710c7cb7b 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -246,16 +246,16 @@ static const struct ksz_drive_strength ksz9477_drive_strengths[] = { { SW_DRIVE_STRENGTH_28MA, 28000 }, }; -/* ksz8830_drive_strengths - Drive strength mapping for KSZ8830, KSZ8873, .. +/* ksz88x3_drive_strengths - Drive strength mapping for KSZ8863, KSZ8873, .. * variants. * This values are documented in KSZ8873 and KSZ8863 datasheets. */ -static const struct ksz_drive_strength ksz8830_drive_strengths[] = { +static const struct ksz_drive_strength ksz88x3_drive_strengths[] = { { 0, 8000 }, { KSZ8873_DRIVE_STRENGTH_16MA, 16000 }, }; -static void ksz8830_phylink_mac_config(struct phylink_config *config, +static void ksz88x3_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state); static void ksz_phylink_mac_config(struct phylink_config *config, @@ -265,8 +265,8 @@ static void ksz_phylink_mac_link_down(struct phylink_config *config, unsigned int mode, phy_interface_t interface); -static const struct phylink_mac_ops ksz8830_phylink_mac_ops = { - .mac_config = ksz8830_phylink_mac_config, +static const struct phylink_mac_ops ksz88x3_phylink_mac_ops = { + .mac_config = ksz88x3_phylink_mac_config, .mac_link_down = ksz_phylink_mac_link_down, .mac_link_up = ksz8_phylink_mac_link_up, }; @@ -1442,8 +1442,8 @@ const struct ksz_chip_data ksz_switch_chips[] = { .internal_phy = {true, true, true, true, false}, }, - [KSZ8830] = { - .chip_id = KSZ8830_CHIP_ID, + [KSZ88X3] = { + .chip_id = KSZ88X3_CHIP_ID, .dev_name = "KSZ8863/KSZ8873", .num_vlans = 16, .num_alus = 0, @@ -1453,7 +1453,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 4, .num_ipms = 4, .ops = &ksz88xx_dev_ops, - .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1487,7 +1487,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 4, .num_ipms = 4, .ops = &ksz88xx_dev_ops, - .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -1510,7 +1510,7 @@ const struct ksz_chip_data ksz_switch_chips[] = { .num_tx_queues = 4, .num_ipms = 4, .ops = &ksz88xx_dev_ops, - .phylink_mac_ops = &ksz8830_phylink_mac_ops, + .phylink_mac_ops = &ksz88x3_phylink_mac_ops, .mib_names = ksz88xx_mib_names, .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names), .reg_mib_cnt = MIB_COUNTER_NUM, @@ -2724,7 +2724,7 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port) struct ksz_device *dev = ds->priv; switch (dev->chip_id) { - case KSZ8830_CHIP_ID: + case KSZ88X3_CHIP_ID: /* Silicon Errata Sheet (DS80000830A): * Port 1 does not work with LinkMD Cable-Testing. * Port 1 does not respond to received PAUSE control frames. @@ -3050,7 +3050,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, if (ksz_is_ksz87xx(dev) || ksz_is_8895_family(dev)) proto = DSA_TAG_PROTO_KSZ8795; - if (dev->chip_id == KSZ8830_CHIP_ID || + if (dev->chip_id == KSZ88X3_CHIP_ID || dev->chip_id == KSZ8563_CHIP_ID || dev->chip_id == KSZ9893_CHIP_ID || dev->chip_id == KSZ9563_CHIP_ID) @@ -3162,7 +3162,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port) case KSZ8794_CHIP_ID: case KSZ8765_CHIP_ID: return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; - case KSZ8830_CHIP_ID: + case KSZ88X3_CHIP_ID: case KSZ8864_CHIP_ID: case KSZ8895_CHIP_ID: return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN; @@ -3334,7 +3334,7 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit) return interface; } -static void ksz8830_phylink_mac_config(struct phylink_config *config, +static void ksz88x3_phylink_mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state) { @@ -3518,7 +3518,7 @@ static int ksz_switch_detect(struct ksz_device *dev) break; case KSZ88_FAMILY_ID: if (id2 == KSZ88_CHIP_ID_63) - dev->chip_id = KSZ8830_CHIP_ID; + dev->chip_id = KSZ88X3_CHIP_ID; else return -ENODEV; break; @@ -4592,24 +4592,24 @@ static int ksz9477_drive_strength_write(struct ksz_device *dev, } /** - * ksz8830_drive_strength_write() - Set the drive strength configuration for - * KSZ8830 compatible chip variants. + * ksz88x3_drive_strength_write() - Set the drive strength configuration for + * KSZ8863 compatible chip variants. * @dev: ksz device * @props: Array of drive strength properties to be set * @num_props: Number of properties in the array * - * This function applies the specified drive strength settings to KSZ8830 chip + * This function applies the specified drive strength settings to KSZ88X3 chip * variants (KSZ8873, KSZ8863). * It ensures the configurations align with what the chip variant supports and * warns or errors out on unsupported settings. * * Return: 0 on success, error code otherwise */ -static int ksz8830_drive_strength_write(struct ksz_device *dev, +static int ksz88x3_drive_strength_write(struct ksz_device *dev, struct ksz_driver_strength_prop *props, int num_props) { - size_t array_size = ARRAY_SIZE(ksz8830_drive_strengths); + size_t array_size = ARRAY_SIZE(ksz88x3_drive_strengths); int microamp; int i, ret; @@ -4622,10 +4622,10 @@ static int ksz8830_drive_strength_write(struct ksz_device *dev, } microamp = props[KSZ_DRIVER_STRENGTH_IO].value; - ret = ksz_drive_strength_to_reg(ksz8830_drive_strengths, array_size, + ret = ksz_drive_strength_to_reg(ksz88x3_drive_strengths, array_size, microamp); if (ret < 0) { - ksz_drive_strength_error(dev, ksz8830_drive_strengths, + ksz_drive_strength_error(dev, ksz88x3_drive_strengths, array_size, microamp); return ret; } @@ -4685,8 +4685,8 @@ static int ksz_parse_drive_strength(struct ksz_device *dev) return 0; switch (dev->chip_id) { - case KSZ8830_CHIP_ID: - return ksz8830_drive_strength_write(dev, of_props, + case KSZ88X3_CHIP_ID: + return ksz88x3_drive_strength_write(dev, of_props, ARRAY_SIZE(of_props)); case KSZ8795_CHIP_ID: case KSZ8794_CHIP_ID: diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index e08d5a1339f4..bec846e20682 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -200,7 +200,7 @@ enum ksz_model { KSZ8795, KSZ8794, KSZ8765, - KSZ8830, + KSZ88X3, KSZ8864, KSZ8895, KSZ9477, @@ -628,7 +628,7 @@ static inline bool ksz_is_ksz87xx(struct ksz_device *dev) static inline bool ksz_is_ksz88x3(struct ksz_device *dev) { - return dev->chip_id == KSZ8830_CHIP_ID; + return dev->chip_id == KSZ88X3_CHIP_ID; } static inline bool ksz_is_8895_family(struct ksz_device *dev) diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c index f4287310e89f..e3e341431f09 100644 --- a/drivers/net/dsa/microchip/ksz_spi.c +++ b/drivers/net/dsa/microchip/ksz_spi.c @@ -54,7 +54,7 @@ static int ksz_spi_probe(struct spi_device *spi) if (!chip) return -EINVAL; - if (chip->chip_id == KSZ8830_CHIP_ID) + if (chip->chip_id == KSZ88X3_CHIP_ID) regmap_config = ksz8863_regmap_config; else if (chip->chip_id == KSZ8795_CHIP_ID || chip->chip_id == KSZ8794_CHIP_ID || @@ -137,7 +137,7 @@ static const struct of_device_id ksz_dt_ids[] = { }, { .compatible = "microchip,ksz8863", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { .compatible = "microchip,ksz8864", @@ -145,7 +145,7 @@ static const struct of_device_id ksz_dt_ids[] = { }, { .compatible = "microchip,ksz8873", - .data = &ksz_switch_chips[KSZ8830] + .data = &ksz_switch_chips[KSZ88X3] }, { .compatible = "microchip,ksz8895", diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index d074019474f5..2ee1a679e592 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -27,7 +27,7 @@ enum ksz_chip_id { KSZ8795_CHIP_ID = 0x8795, KSZ8794_CHIP_ID = 0x8794, KSZ8765_CHIP_ID = 0x8765, - KSZ8830_CHIP_ID = 0x8830, + KSZ88X3_CHIP_ID = 0x8830, KSZ8864_CHIP_ID = 0x8864, KSZ8895_CHIP_ID = 0x8895, KSZ9477_CHIP_ID = 0x00947700, -- cgit v1.2.3 From d6de45e3c6f3713d3825d3e2860c11d24e0f941f Mon Sep 17 00:00:00 2001 From: Bas Nieuwenhuizen Date: Tue, 10 Sep 2024 00:35:03 +0200 Subject: platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The OOBE experience fades the keyboard backlight in & out continuously, and make the backlight uncontrollable using its device. Workaround taken from https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547 Signed-off-by: Bas Nieuwenhuizen Reviewed-by: Luke D. Jones Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-wmi.c | 10 ++++++++++ include/linux/platform_data/x86/asus-wmi.h | 1 + 2 files changed, 11 insertions(+) (limited to 'include/linux/platform_data') diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 37636e5a38e3..321a658e4554 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1793,6 +1793,16 @@ static int asus_wmi_led_init(struct asus_wmi *asus) goto error; } + if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_OOBE)) { + /* + * Disable OOBE state, so that e.g. the keyboard backlight + * works. + */ + rv = asus_wmi_set_devstate(ASUS_WMI_DEVID_OOBE, 1, NULL); + if (rv) + goto error; + } + error: if (rv) asus_wmi_led_exit(asus); diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 0aeeae1c1943..ae9bf7479e7b 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -62,6 +62,7 @@ #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 +#define ASUS_WMI_DEVID_OOBE 0x0005002F /* This can only be used to disable the screen, not re-enable */ #define ASUS_WMI_DEVID_SCREENPAD_POWER 0x00050031 /* Writing a brightness re-enables the screen if disabled */ -- cgit v1.2.3 From c912ac66b3fc92acb0079fff7d030e9be0756c36 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 9 Sep 2024 15:41:05 +0300 Subject: platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm This is a platform/x86 library that is mostly being used by other drivers not directly under arch/x86 anyway (with the exception of the Intel MID setup code) so it makes sense that it lives under the platform_data/x86/ directory instead. No functional changes intended. Suggested-by: Andy Shevchenko Signed-off-by: Mika Westerberg Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- MAINTAINERS | 4 +- arch/x86/include/asm/intel_scu_ipc.h | 68 ------------------------- arch/x86/include/asm/intel_telemetry.h | 2 +- arch/x86/platform/intel-mid/intel-mid.c | 3 +- drivers/mfd/intel_pmc_bxt.c | 3 +- drivers/mfd/intel_soc_pmic_bxtwc.c | 3 +- drivers/mfd/intel_soc_pmic_mrfld.c | 3 +- drivers/platform/x86/intel_scu_ipc.c | 2 +- drivers/platform/x86/intel_scu_ipcutil.c | 2 +- drivers/platform/x86/intel_scu_pcidrv.c | 2 +- drivers/platform/x86/intel_scu_pltdrv.c | 2 +- drivers/usb/typec/mux/intel_pmc_mux.c | 3 +- drivers/watchdog/intel-mid_wdt.c | 3 +- include/linux/platform_data/x86/intel_scu_ipc.h | 68 +++++++++++++++++++++++++ 14 files changed, 82 insertions(+), 86 deletions(-) delete mode 100644 arch/x86/include/asm/intel_scu_ipc.h create mode 100644 include/linux/platform_data/x86/intel_scu_ipc.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index 2ba2877c095d..3f3a8d8abf87 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11471,7 +11471,6 @@ M: Andy Shevchenko L: linux-kernel@vger.kernel.org S: Supported F: arch/x86/include/asm/intel-mid.h -F: arch/x86/include/asm/intel_scu_ipc.h F: arch/x86/pci/intel_mid_pci.c F: arch/x86/platform/intel-mid/ F: drivers/extcon/extcon-intel-mrfld.c @@ -11483,6 +11482,7 @@ F: drivers/staging/media/atomisp/ F: drivers/watchdog/intel-mid_wdt.c F: include/linux/mfd/intel_soc_pmic_mrfld.h F: include/linux/platform_data/intel-mid_wdt.h +F: include/linux/platform_data/x86/intel_scu_ipc.h INTEL P-Unit IPC DRIVER M: Zha Qipeng @@ -11546,8 +11546,8 @@ F: drivers/counter/intel-qep.c INTEL SCU DRIVERS M: Mika Westerberg S: Maintained -F: arch/x86/include/asm/intel_scu_ipc.h F: drivers/platform/x86/intel_scu_* +F: include/linux/platform_data/x86/intel_scu_ipc.h INTEL SDSI DRIVER M: David E. Box diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h deleted file mode 100644 index 8537f597d20a..000000000000 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_X86_INTEL_SCU_IPC_H_ -#define _ASM_X86_INTEL_SCU_IPC_H_ - -#include - -struct device; -struct intel_scu_ipc_dev; - -/** - * struct intel_scu_ipc_data - Data used to configure SCU IPC - * @mem: Base address of SCU IPC MMIO registers - * @irq: The IRQ number used for SCU (optional) - */ -struct intel_scu_ipc_data { - struct resource mem; - int irq; -}; - -struct intel_scu_ipc_dev * -__intel_scu_ipc_register(struct device *parent, - const struct intel_scu_ipc_data *scu_data, - struct module *owner); - -#define intel_scu_ipc_register(parent, scu_data) \ - __intel_scu_ipc_register(parent, scu_data, THIS_MODULE) - -void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu); - -struct intel_scu_ipc_dev * -__devm_intel_scu_ipc_register(struct device *parent, - const struct intel_scu_ipc_data *scu_data, - struct module *owner); - -#define devm_intel_scu_ipc_register(parent, scu_data) \ - __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE) - -struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void); -void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu); -struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev); - -int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, - u8 *data); -int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, - u8 data); -int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, - u8 *data, size_t len); -int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, - u8 *data, size_t len); - -int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, - u8 data, u8 mask); - -int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, - int sub); -int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, - int sub, const void *in, size_t inlen, - size_t size, void *out, size_t outlen); - -static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd, - int sub, const void *in, size_t inlen, - void *out, size_t outlen) -{ - return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen, - inlen, out, outlen); -} - -#endif diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h index 8046e70dfd7c..43b7657febca 100644 --- a/arch/x86/include/asm/intel_telemetry.h +++ b/arch/x86/include/asm/intel_telemetry.h @@ -10,7 +10,7 @@ #define TELEM_MAX_EVENTS_SRAM 28 #define TELEM_MAX_OS_ALLOCATED_EVENTS 20 -#include +#include enum telemetry_unit { TELEM_PSS = 0, diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index f83bbe0acd4a..a8e75f8c14fd 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -27,9 +27,10 @@ #include #include #include -#include #include +#include + #define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */ #define IPCMSG_COLD_RESET 0xF1 diff --git a/drivers/mfd/intel_pmc_bxt.c b/drivers/mfd/intel_pmc_bxt.c index 9f01d38acc7f..e405d7513ca1 100644 --- a/drivers/mfd/intel_pmc_bxt.c +++ b/drivers/mfd/intel_pmc_bxt.c @@ -23,8 +23,7 @@ #include #include #include - -#include +#include /* Residency with clock rate at 19.2MHz to usecs */ #define S0IX_RESIDENCY_IN_USECS(d, s) \ diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c index ba32cacfc499..ab3c94224dd1 100644 --- a/drivers/mfd/intel_soc_pmic_bxtwc.c +++ b/drivers/mfd/intel_soc_pmic_bxtwc.c @@ -15,8 +15,7 @@ #include #include #include - -#include +#include /* PMIC device registers */ #define REG_ADDR_MASK GENMASK(15, 8) diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c index 71da861e8c27..77121775c1a3 100644 --- a/drivers/mfd/intel_soc_pmic_mrfld.c +++ b/drivers/mfd/intel_soc_pmic_mrfld.c @@ -12,11 +12,10 @@ #include #include #include +#include #include #include -#include - /* * Level 2 IRQs * diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index a68df4133403..5b16d29c93d7 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -23,7 +23,7 @@ #include #include -#include +#include /* IPC defines the following message types */ #define IPCMSG_PCNTRL 0xff /* Power controller unit read/write */ diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c index 7d87cbd4b9c6..69b36ce41fa2 100644 --- a/drivers/platform/x86/intel_scu_ipcutil.c +++ b/drivers/platform/x86/intel_scu_ipcutil.c @@ -18,7 +18,7 @@ #include #include -#include +#include static int major; diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel_scu_pcidrv.c index dbf0310448da..d7f72d6deb44 100644 --- a/drivers/platform/x86/intel_scu_pcidrv.c +++ b/drivers/platform/x86/intel_scu_pcidrv.c @@ -11,7 +11,7 @@ #include #include -#include +#include static int intel_scu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/platform/x86/intel_scu_pltdrv.c b/drivers/platform/x86/intel_scu_pltdrv.c index 56ec6ae4c824..0892362acd7b 100644 --- a/drivers/platform/x86/intel_scu_pltdrv.c +++ b/drivers/platform/x86/intel_scu_pltdrv.c @@ -15,7 +15,7 @@ #include #include -#include +#include static int intel_scu_platform_probe(struct platform_device *pdev) { diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index 56989a0d0f43..46b4c5c3a6be 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -18,8 +19,6 @@ #include #include -#include - #define PMC_USBC_CMD 0xa7 /* Response status bits */ diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c index 8d71f6a2236b..91c9c3950e44 100644 --- a/drivers/watchdog/intel-mid_wdt.c +++ b/drivers/watchdog/intel-mid_wdt.c @@ -21,8 +21,7 @@ #include #include - -#include +#include #define IPC_WATCHDOG 0xf8 diff --git a/include/linux/platform_data/x86/intel_scu_ipc.h b/include/linux/platform_data/x86/intel_scu_ipc.h new file mode 100644 index 000000000000..0ca9962e97f2 --- /dev/null +++ b/include/linux/platform_data/x86/intel_scu_ipc.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PLATFORM_X86_INTEL_SCU_IPC_H_ +#define __PLATFORM_X86_INTEL_SCU_IPC_H_ + +#include + +struct device; +struct intel_scu_ipc_dev; + +/** + * struct intel_scu_ipc_data - Data used to configure SCU IPC + * @mem: Base address of SCU IPC MMIO registers + * @irq: The IRQ number used for SCU (optional) + */ +struct intel_scu_ipc_data { + struct resource mem; + int irq; +}; + +struct intel_scu_ipc_dev * +__intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define intel_scu_ipc_register(parent, scu_data) \ + __intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu); + +struct intel_scu_ipc_dev * +__devm_intel_scu_ipc_register(struct device *parent, + const struct intel_scu_ipc_data *scu_data, + struct module *owner); + +#define devm_intel_scu_ipc_register(parent, scu_data) \ + __devm_intel_scu_ipc_register(parent, scu_data, THIS_MODULE) + +struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void); +void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu); +struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev); + +int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 *data); +int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data); +int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); +int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, + u8 *data, size_t len); + +int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, + u8 data, u8 mask); + +int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub); +int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + size_t size, void *out, size_t outlen); + +static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int cmd, + int sub, const void *in, size_t inlen, + void *out, size_t outlen) +{ + return intel_scu_ipc_dev_command_with_size(scu, cmd, sub, in, inlen, + inlen, out, outlen); +} + +#endif -- cgit v1.2.3 From 5f1cda51107fd5e53cd012bd1f6f39aede96bdbe Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 9 Sep 2024 15:41:06 +0300 Subject: platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder This is a platform/x86 library that can only be used on x86 devices. so it makes sense that it lives under the platform_data/x86/ directory instead. No functional changes intended. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/intel_scu_wdt.c | 3 ++- drivers/watchdog/intel-mid_wdt.c | 2 +- include/linux/platform_data/intel-mid_wdt.h | 19 ------------------- include/linux/platform_data/x86/intel-mid_wdt.h | 19 +++++++++++++++++++ 4 files changed, 22 insertions(+), 21 deletions(-) delete mode 100644 include/linux/platform_data/intel-mid_wdt.h create mode 100644 include/linux/platform_data/x86/intel-mid_wdt.h (limited to 'include/linux/platform_data') diff --git a/drivers/platform/x86/intel_scu_wdt.c b/drivers/platform/x86/intel_scu_wdt.c index d0b6637861d3..746d47d33406 100644 --- a/drivers/platform/x86/intel_scu_wdt.c +++ b/drivers/platform/x86/intel_scu_wdt.c @@ -9,13 +9,14 @@ #include #include #include -#include #include #include #include #include +#include + #define TANGIER_EXT_TIMER0_MSI 12 static struct platform_device wdt_dev = { diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c index 91c9c3950e44..756d262dc580 100644 --- a/drivers/watchdog/intel-mid_wdt.c +++ b/drivers/watchdog/intel-mid_wdt.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #define IPC_WATCHDOG 0xf8 diff --git a/include/linux/platform_data/intel-mid_wdt.h b/include/linux/platform_data/intel-mid_wdt.h deleted file mode 100644 index 8dba70b4b020..000000000000 --- a/include/linux/platform_data/intel-mid_wdt.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * intel-mid_wdt: generic Intel MID SCU watchdog driver - * - * Copyright (C) 2014 Intel Corporation. All rights reserved. - * Contact: David Cohen - */ - -#ifndef __INTEL_MID_WDT_H__ -#define __INTEL_MID_WDT_H__ - -#include - -struct intel_mid_wdt_pdata { - int irq; - int (*probe)(struct platform_device *pdev); -}; - -#endif /*__INTEL_MID_WDT_H__*/ diff --git a/include/linux/platform_data/x86/intel-mid_wdt.h b/include/linux/platform_data/x86/intel-mid_wdt.h new file mode 100644 index 000000000000..e5c0210d0fec --- /dev/null +++ b/include/linux/platform_data/x86/intel-mid_wdt.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * intel-mid_wdt: generic Intel MID SCU watchdog driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * Contact: David Cohen + */ + +#ifndef __PLATFORM_X86_INTEL_MID_WDT_H_ +#define __PLATFORM_X86_INTEL_MID_WDT_H_ + +#include + +struct intel_mid_wdt_pdata { + int irq; + int (*probe)(struct platform_device *pdev); +}; + +#endif /* __PLATFORM_X86_INTEL_MID_WDT_H_ */ -- cgit v1.2.3 From 2e7f55ce430240a5547b8a94b4c532fc8c20b18b Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:10:34 +0300 Subject: dmaengine: cirrus: Convert to DT for Cirrus EP93xx Convert Cirrus EP93xx DMA to device tree usage: - add OF ID match table with data - add of_probe for device tree - add xlate for m2m/m2p - drop subsys_initcall code - drop platform probe - drop platform structs usage >From now on it only supports device tree probing. Co-developed-by: Alexander Sverdlin Signed-off-by: Alexander Sverdlin Acked-by: Vinod Koul Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Signed-off-by: Arnd Bergmann --- drivers/dma/ep93xx_dma.c | 239 ++++++++++++++++++++++++------- include/linux/platform_data/dma-ep93xx.h | 6 + 2 files changed, 191 insertions(+), 54 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index d6c60635e90d..17c8e2badee2 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -104,6 +106,11 @@ #define DMA_MAX_CHAN_BYTES 0xffff #define DMA_MAX_CHAN_DESCRIPTORS 32 +enum ep93xx_dma_type { + M2P_DMA, + M2M_DMA, +}; + struct ep93xx_dma_engine; static int ep93xx_dma_slave_config_write(struct dma_chan *chan, enum dma_transfer_direction dir, @@ -129,11 +136,17 @@ struct ep93xx_dma_desc { struct list_head node; }; +struct ep93xx_dma_chan_cfg { + u8 port; + enum dma_transfer_direction dir; +}; + /** * struct ep93xx_dma_chan - an EP93xx DMA M2P/M2M channel * @chan: dmaengine API channel * @edma: pointer to the engine device * @regs: memory mapped registers + * @dma_cfg: channel number, direction * @irq: interrupt number of the channel * @clk: clock used by this channel * @tasklet: channel specific tasklet used for callbacks @@ -157,14 +170,12 @@ struct ep93xx_dma_desc { * descriptor in the chain. When a descriptor is moved to the @active queue, * the first and chained descriptors are flattened into a single list. * - * @chan.private holds pointer to &struct ep93xx_dma_data which contains - * necessary channel configuration information. For memcpy channels this must - * be %NULL. */ struct ep93xx_dma_chan { struct dma_chan chan; const struct ep93xx_dma_engine *edma; void __iomem *regs; + struct ep93xx_dma_chan_cfg dma_cfg; int irq; struct clk *clk; struct tasklet_struct tasklet; @@ -216,6 +227,11 @@ struct ep93xx_dma_engine { struct ep93xx_dma_chan channels[] __counted_by(num_channels); }; +struct ep93xx_edma_data { + u32 id; + size_t num_channels; +}; + static inline struct device *chan2dev(struct ep93xx_dma_chan *edmac) { return &edmac->chan.dev->device; @@ -318,10 +334,9 @@ static void m2p_set_control(struct ep93xx_dma_chan *edmac, u32 control) static int m2p_hw_setup(struct ep93xx_dma_chan *edmac) { - struct ep93xx_dma_data *data = edmac->chan.private; u32 control; - writel(data->port & 0xf, edmac->regs + M2P_PPALLOC); + writel(edmac->dma_cfg.port & 0xf, edmac->regs + M2P_PPALLOC); control = M2P_CONTROL_CH_ERROR_INT | M2P_CONTROL_ICE | M2P_CONTROL_ENABLE; @@ -458,16 +473,15 @@ static int m2p_hw_interrupt(struct ep93xx_dma_chan *edmac) static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) { - const struct ep93xx_dma_data *data = edmac->chan.private; u32 control = 0; - if (!data) { + if (edmac->dma_cfg.dir == DMA_MEM_TO_MEM) { /* This is memcpy channel, nothing to configure */ writel(control, edmac->regs + M2M_CONTROL); return 0; } - switch (data->port) { + switch (edmac->dma_cfg.port) { case EP93XX_DMA_SSP: /* * This was found via experimenting - anything less than 5 @@ -477,7 +491,7 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) control = (5 << M2M_CONTROL_PWSC_SHIFT); control |= M2M_CONTROL_NO_HDSK; - if (data->direction == DMA_MEM_TO_DEV) { + if (edmac->dma_cfg.dir == DMA_MEM_TO_DEV) { control |= M2M_CONTROL_DAH; control |= M2M_CONTROL_TM_TX; control |= M2M_CONTROL_RSS_SSPTX; @@ -493,7 +507,7 @@ static int m2m_hw_setup(struct ep93xx_dma_chan *edmac) * This IDE part is totally untested. Values below are taken * from the EP93xx Users's Guide and might not be correct. */ - if (data->direction == DMA_MEM_TO_DEV) { + if (edmac->dma_cfg.dir == DMA_MEM_TO_DEV) { /* Worst case from the UG */ control = (3 << M2M_CONTROL_PWSC_SHIFT); control |= M2M_CONTROL_DAH; @@ -548,7 +562,6 @@ static void m2m_fill_desc(struct ep93xx_dma_chan *edmac) static void m2m_hw_submit(struct ep93xx_dma_chan *edmac) { - struct ep93xx_dma_data *data = edmac->chan.private; u32 control = readl(edmac->regs + M2M_CONTROL); /* @@ -574,7 +587,7 @@ static void m2m_hw_submit(struct ep93xx_dma_chan *edmac) control |= M2M_CONTROL_ENABLE; writel(control, edmac->regs + M2M_CONTROL); - if (!data) { + if (edmac->dma_cfg.dir == DMA_MEM_TO_MEM) { /* * For memcpy channels the software trigger must be asserted * in order to start the memcpy operation. @@ -636,7 +649,7 @@ static int m2m_hw_interrupt(struct ep93xx_dma_chan *edmac) */ if (ep93xx_dma_advance_active(edmac)) { m2m_fill_desc(edmac); - if (done && !edmac->chan.private) { + if (done && edmac->dma_cfg.dir == DMA_MEM_TO_MEM) { /* Software trigger for memcpy channel */ control = readl(edmac->regs + M2M_CONTROL); control |= M2M_CONTROL_START; @@ -867,25 +880,22 @@ static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx) static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) { struct ep93xx_dma_chan *edmac = to_ep93xx_dma_chan(chan); - struct ep93xx_dma_data *data = chan->private; const char *name = dma_chan_name(chan); int ret, i; /* Sanity check the channel parameters */ if (!edmac->edma->m2m) { - if (!data) - return -EINVAL; - if (data->port < EP93XX_DMA_I2S1 || - data->port > EP93XX_DMA_IRDA) + if (edmac->dma_cfg.port < EP93XX_DMA_I2S1 || + edmac->dma_cfg.port > EP93XX_DMA_IRDA) return -EINVAL; - if (data->direction != ep93xx_dma_chan_direction(chan)) + if (edmac->dma_cfg.dir != ep93xx_dma_chan_direction(chan)) return -EINVAL; } else { - if (data) { - switch (data->port) { + if (edmac->dma_cfg.dir != DMA_MEM_TO_MEM) { + switch (edmac->dma_cfg.port) { case EP93XX_DMA_SSP: case EP93XX_DMA_IDE: - if (!is_slave_direction(data->direction)) + if (!is_slave_direction(edmac->dma_cfg.dir)) return -EINVAL; break; default: @@ -894,9 +904,6 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan) } } - if (data && data->name) - name = data->name; - ret = clk_prepare_enable(edmac->clk); if (ret) return ret; @@ -1315,36 +1322,53 @@ static void ep93xx_dma_issue_pending(struct dma_chan *chan) ep93xx_dma_advance_work(to_ep93xx_dma_chan(chan)); } -static int __init ep93xx_dma_probe(struct platform_device *pdev) +static struct ep93xx_dma_engine *ep93xx_dma_of_probe(struct platform_device *pdev) { - struct ep93xx_dma_platform_data *pdata = dev_get_platdata(&pdev->dev); + const struct ep93xx_edma_data *data; + struct device *dev = &pdev->dev; struct ep93xx_dma_engine *edma; struct dma_device *dma_dev; - int ret, i; + char dma_clk_name[5]; + int i; - edma = kzalloc(struct_size(edma, channels, pdata->num_channels), GFP_KERNEL); + data = device_get_match_data(dev); + if (!data) + return ERR_PTR(dev_err_probe(dev, -ENODEV, "No device match found\n")); + + edma = devm_kzalloc(dev, struct_size(edma, channels, data->num_channels), + GFP_KERNEL); if (!edma) - return -ENOMEM; + return ERR_PTR(-ENOMEM); + edma->m2m = data->id; + edma->num_channels = data->num_channels; dma_dev = &edma->dma_dev; - edma->m2m = platform_get_device_id(pdev)->driver_data; - edma->num_channels = pdata->num_channels; INIT_LIST_HEAD(&dma_dev->channels); - for (i = 0; i < pdata->num_channels; i++) { - const struct ep93xx_dma_chan_data *cdata = &pdata->channels[i]; + for (i = 0; i < edma->num_channels; i++) { struct ep93xx_dma_chan *edmac = &edma->channels[i]; edmac->chan.device = dma_dev; - edmac->regs = cdata->base; - edmac->irq = cdata->irq; + edmac->regs = devm_platform_ioremap_resource(pdev, i); + if (IS_ERR(edmac->regs)) + return edmac->regs; + + edmac->irq = fwnode_irq_get(dev_fwnode(dev), i); + if (edmac->irq < 0) + return ERR_PTR(edmac->irq); + edmac->edma = edma; - edmac->clk = clk_get(NULL, cdata->name); + if (edma->m2m) + sprintf(dma_clk_name, "m2m%u", i); + else + sprintf(dma_clk_name, "m2p%u", i); + + edmac->clk = devm_clk_get(dev, dma_clk_name); if (IS_ERR(edmac->clk)) { - dev_warn(&pdev->dev, "failed to get clock for %s\n", - cdata->name); - continue; + dev_err_probe(dev, PTR_ERR(edmac->clk), + "no %s clock found\n", dma_clk_name); + return ERR_CAST(edmac->clk); } spin_lock_init(&edmac->lock); @@ -1357,6 +1381,90 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev) &dma_dev->channels); } + return edma; +} + +static bool ep93xx_m2p_dma_filter(struct dma_chan *chan, void *filter_param) +{ + struct ep93xx_dma_chan *echan = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_chan_cfg *cfg = filter_param; + + if (cfg->dir != ep93xx_dma_chan_direction(chan)) + return false; + + echan->dma_cfg = *cfg; + return true; +} + +static struct dma_chan *ep93xx_m2p_dma_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct ep93xx_dma_engine *edma = ofdma->of_dma_data; + dma_cap_mask_t mask = edma->dma_dev.cap_mask; + struct ep93xx_dma_chan_cfg dma_cfg; + u8 port = dma_spec->args[0]; + u8 direction = dma_spec->args[1]; + + if (port > EP93XX_DMA_IRDA) + return NULL; + + if (!is_slave_direction(direction)) + return NULL; + + dma_cfg.port = port; + dma_cfg.dir = direction; + + return __dma_request_channel(&mask, ep93xx_m2p_dma_filter, &dma_cfg, ofdma->of_node); +} + +static bool ep93xx_m2m_dma_filter(struct dma_chan *chan, void *filter_param) +{ + struct ep93xx_dma_chan *echan = to_ep93xx_dma_chan(chan); + struct ep93xx_dma_chan_cfg *cfg = filter_param; + + echan->dma_cfg = *cfg; + + return true; +} + +static struct dma_chan *ep93xx_m2m_dma_of_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct ep93xx_dma_engine *edma = ofdma->of_dma_data; + dma_cap_mask_t mask = edma->dma_dev.cap_mask; + struct ep93xx_dma_chan_cfg dma_cfg; + u8 port = dma_spec->args[0]; + u8 direction = dma_spec->args[1]; + + if (!is_slave_direction(direction)) + return NULL; + + switch (port) { + case EP93XX_DMA_SSP: + case EP93XX_DMA_IDE: + break; + default: + return NULL; + } + + dma_cfg.port = port; + dma_cfg.dir = direction; + + return __dma_request_channel(&mask, ep93xx_m2m_dma_filter, &dma_cfg, ofdma->of_node); +} + +static int ep93xx_dma_probe(struct platform_device *pdev) +{ + struct ep93xx_dma_engine *edma; + struct dma_device *dma_dev; + int ret; + + edma = ep93xx_dma_of_probe(pdev); + if (!edma) + return PTR_ERR(edma); + + dma_dev = &edma->dma_dev; + dma_cap_zero(dma_dev->cap_mask); dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); dma_cap_set(DMA_CYCLIC, dma_dev->cap_mask); @@ -1393,21 +1501,46 @@ static int __init ep93xx_dma_probe(struct platform_device *pdev) } ret = dma_async_device_register(dma_dev); - if (unlikely(ret)) { - for (i = 0; i < edma->num_channels; i++) { - struct ep93xx_dma_chan *edmac = &edma->channels[i]; - if (!IS_ERR_OR_NULL(edmac->clk)) - clk_put(edmac->clk); - } - kfree(edma); + if (ret) + return ret; + + if (edma->m2m) { + ret = of_dma_controller_register(pdev->dev.of_node, ep93xx_m2m_dma_of_xlate, + edma); } else { - dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", - edma->m2m ? "M" : "P"); + ret = of_dma_controller_register(pdev->dev.of_node, ep93xx_m2p_dma_of_xlate, + edma); } + if (ret) + goto err_dma_unregister; + + dev_info(dma_dev->dev, "EP93xx M2%s DMA ready\n", edma->m2m ? "M" : "P"); + + return 0; + +err_dma_unregister: + dma_async_device_unregister(dma_dev); return ret; } +static const struct ep93xx_edma_data edma_m2p = { + .id = M2P_DMA, + .num_channels = 10, +}; + +static const struct ep93xx_edma_data edma_m2m = { + .id = M2M_DMA, + .num_channels = 2, +}; + +static const struct of_device_id ep93xx_dma_of_ids[] = { + { .compatible = "cirrus,ep9301-dma-m2p", .data = &edma_m2p }, + { .compatible = "cirrus,ep9301-dma-m2m", .data = &edma_m2m }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ep93xx_dma_of_ids); + static const struct platform_device_id ep93xx_dma_driver_ids[] = { { "ep93xx-dma-m2p", 0 }, { "ep93xx-dma-m2m", 1 }, @@ -1417,15 +1550,13 @@ static const struct platform_device_id ep93xx_dma_driver_ids[] = { static struct platform_driver ep93xx_dma_driver = { .driver = { .name = "ep93xx-dma", + .of_match_table = ep93xx_dma_of_ids, }, .id_table = ep93xx_dma_driver_ids, + .probe = ep93xx_dma_probe, }; -static int __init ep93xx_dma_module_init(void) -{ - return platform_driver_probe(&ep93xx_dma_driver, ep93xx_dma_probe); -} -subsys_initcall(ep93xx_dma_module_init); +module_platform_driver(ep93xx_dma_driver); MODULE_AUTHOR("Mika Westerberg "); MODULE_DESCRIPTION("EP93xx DMA driver"); diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h index eb9805bb3fe8..9ec5cdd5a1eb 100644 --- a/include/linux/platform_data/dma-ep93xx.h +++ b/include/linux/platform_data/dma-ep93xx.h @@ -3,8 +3,11 @@ #define __ASM_ARCH_DMA_H #include +#include #include #include +#include +#include /* * M2P channels. @@ -70,6 +73,9 @@ struct ep93xx_dma_platform_data { static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) { + if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p")) + return true; + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); } -- cgit v1.2.3 From e5ef574dda702e62081d5c7991949cbdb7f65c08 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:11:00 +0300 Subject: ARM: ep93xx: delete all boardfiles Delete the ep93xx board files. Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- arch/arm/mach-ep93xx/clock.c | 733 ------------------------ arch/arm/mach-ep93xx/core.c | 955 ------------------------------- arch/arm/mach-ep93xx/dma.c | 114 ---- arch/arm/mach-ep93xx/edb93xx.c | 368 ------------ arch/arm/mach-ep93xx/ep93xx-regs.h | 38 -- arch/arm/mach-ep93xx/gpio-ep93xx.h | 111 ---- arch/arm/mach-ep93xx/hardware.h | 25 - arch/arm/mach-ep93xx/irqs.h | 76 --- arch/arm/mach-ep93xx/platform.h | 42 -- arch/arm/mach-ep93xx/soc.h | 212 ------- arch/arm/mach-ep93xx/timer-ep93xx.c | 143 ----- arch/arm/mach-ep93xx/ts72xx.c | 422 -------------- arch/arm/mach-ep93xx/ts72xx.h | 94 --- arch/arm/mach-ep93xx/vision_ep9307.c | 321 ----------- include/linux/platform_data/spi-ep93xx.h | 15 - 15 files changed, 3669 deletions(-) delete mode 100644 arch/arm/mach-ep93xx/clock.c delete mode 100644 arch/arm/mach-ep93xx/core.c delete mode 100644 arch/arm/mach-ep93xx/dma.c delete mode 100644 arch/arm/mach-ep93xx/edb93xx.c delete mode 100644 arch/arm/mach-ep93xx/ep93xx-regs.h delete mode 100644 arch/arm/mach-ep93xx/gpio-ep93xx.h delete mode 100644 arch/arm/mach-ep93xx/hardware.h delete mode 100644 arch/arm/mach-ep93xx/irqs.h delete mode 100644 arch/arm/mach-ep93xx/platform.h delete mode 100644 arch/arm/mach-ep93xx/soc.h delete mode 100644 arch/arm/mach-ep93xx/timer-ep93xx.c delete mode 100644 arch/arm/mach-ep93xx/ts72xx.c delete mode 100644 arch/arm/mach-ep93xx/ts72xx.h delete mode 100644 arch/arm/mach-ep93xx/vision_ep9307.c delete mode 100644 include/linux/platform_data/spi-ep93xx.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c deleted file mode 100644 index e9f72a529b50..000000000000 --- a/arch/arm/mach-ep93xx/clock.c +++ /dev/null @@ -1,733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/clock.c - * Clock control for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hardware.h" - -#include - -#include "soc.h" - -static DEFINE_SPINLOCK(clk_lock); - -static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; -static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; -static char pclk_divisors[] = { 1, 2, 4, 8 }; - -static char adc_divisors[] = { 16, 4 }; -static char sclk_divisors[] = { 2, 4 }; -static char lrclk_divisors[] = { 32, 64, 128 }; - -static const char * const mux_parents[] = { - "xtali", - "pll1", - "pll2" -}; - -/* - * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS - */ -static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word) -{ - int i; - - rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ - rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ - do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ - for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ - rate >>= 1; - - return (unsigned long)rate; -} - -struct clk_psc { - struct clk_hw hw; - void __iomem *reg; - u8 bit_idx; - u32 mask; - u8 shift; - u8 width; - char *div; - u8 num_div; - spinlock_t *lock; -}; - -#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) - -static int ep93xx_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = readl(psc->reg); - - return (val & BIT(psc->bit_idx)) ? 1 : 0; -} - -static int ep93xx_clk_enable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val |= BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static void ep93xx_clk_disable(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~BIT(psc->bit_idx); - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); -} - -static const struct clk_ops clk_ep93xx_gate_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, -}; - -static struct clk_hw *ep93xx_clk_register_gate(const char *name, - const char *parent_name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ep93xx_gate_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = (parent_name ? 1 : 0); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->hw.init = &init; - psc->lock = &clk_lock; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - - return &psc->hw; -} - -static u8 ep93xx_mux_get_parent(struct clk_hw *hw) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - - if (!(val & EP93XX_SYSCON_CLKDIV_ESEL)) - return 0; - - if (!(val & EP93XX_SYSCON_CLKDIV_PSEL)) - return 1; - - return 2; -} - -static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long flags = 0; - u32 val; - - if (index >= ARRAY_SIZE(mux_parents)) - return -EINVAL; - - if (psc->lock) - spin_lock_irqsave(psc->lock, flags); - - val = __raw_readl(psc->reg); - val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL); - - - if (index != 0) { - val |= EP93XX_SYSCON_CLKDIV_ESEL; - val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0; - } - - ep93xx_syscon_swlocked_write(val, psc->reg); - - if (psc->lock) - spin_unlock_irqrestore(psc->lock, flags); - - return 0; -} - -static bool is_best(unsigned long rate, unsigned long now, - unsigned long best) -{ - return abs(rate - now) < abs(rate - best); -} - -static int ep93xx_mux_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - unsigned long rate = req->rate; - struct clk *best_parent = NULL; - unsigned long __parent_rate; - unsigned long best_rate = 0, actual_rate, mclk_rate; - unsigned long best_parent_rate; - int __div = 0, __pdiv = 0; - int i; - - /* - * Try the two pll's and the external clock - * Because the valid predividers are 2, 2.5 and 3, we multiply - * all the clocks by 2 to avoid floating point math. - * - * This is based on the algorithm in the ep93xx raster guide: - * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf - * - */ - for (i = 0; i < ARRAY_SIZE(mux_parents); i++) { - struct clk *parent = clk_get_sys(mux_parents[i], NULL); - - __parent_rate = clk_get_rate(parent); - mclk_rate = __parent_rate * 2; - - /* Try each predivider value */ - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - best_rate = actual_rate; - best_parent_rate = __parent_rate; - best_parent = parent; - } - } - } - - if (!best_parent) - return -EINVAL; - - req->best_parent_rate = best_parent_rate; - req->best_parent_hw = __clk_get_hw(best_parent); - req->rate = best_rate; - - return 0; -} - -static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long rate = 0; - u32 val = __raw_readl(psc->reg); - int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03); - int __div = val & 0x7f; - - if (__div > 0) - rate = (parent_rate * 2) / ((__pdiv + 3) * __div); - - return rate; -} - -static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - int pdiv = 0, div = 0; - unsigned long best_rate = 0, actual_rate, mclk_rate; - int __div = 0, __pdiv = 0; - u32 val; - - mclk_rate = parent_rate * 2; - - for (__pdiv = 4; __pdiv <= 6; __pdiv++) { - __div = mclk_rate / (rate * __pdiv); - if (__div < 2 || __div > 127) - continue; - - actual_rate = mclk_rate / (__pdiv * __div); - if (is_best(rate, actual_rate, best_rate)) { - pdiv = __pdiv - 3; - div = __div; - best_rate = actual_rate; - } - } - - if (!best_rate) - return -EINVAL; - - val = __raw_readl(psc->reg); - - /* Clear old dividers */ - val &= ~0x37f; - - /* Set the new pdiv and div bits for the new clock rate */ - val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops clk_ddiv_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .get_parent = ep93xx_mux_get_parent, - .set_parent = ep93xx_mux_set_parent_lock, - .determine_rate = ep93xx_mux_determine_rate, - .recalc_rate = ep93xx_ddiv_recalc_rate, - .set_rate = ep93xx_ddiv_set_rate, -}; - -static struct clk_hw *clk_hw_register_ddiv(const char *name, - void __iomem *reg, - u8 bit_idx) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_ddiv_ops; - init.flags = 0; - init.parent_names = mux_parents; - init.num_parents = ARRAY_SIZE(mux_parents); - - psc->reg = reg; - psc->bit_idx = bit_idx; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg); - u8 index = (val & psc->mask) >> psc->shift; - - if (index >= psc->num_div) - return 0; - - return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); -} - -static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - unsigned long best = 0, now, maxdiv; - int i; - - maxdiv = psc->div[psc->num_div - 1]; - - for (i = 0; i < psc->num_div; i++) { - if ((rate * psc->div[i]) == *parent_rate) - return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); - - if (is_best(rate, now, best)) - best = now; - } - - if (!best) - best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv); - - return best; -} - -static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_psc *psc = to_clk_psc(hw); - u32 val = __raw_readl(psc->reg) & ~psc->mask; - int i; - - for (i = 0; i < psc->num_div; i++) - if (rate == parent_rate / psc->div[i]) { - val |= i << psc->shift; - break; - } - - if (i == psc->num_div) - return -EINVAL; - - ep93xx_syscon_swlocked_write(val, psc->reg); - - return 0; -} - -static const struct clk_ops ep93xx_div_ops = { - .enable = ep93xx_clk_enable, - .disable = ep93xx_clk_disable, - .is_enabled = ep93xx_clk_is_enabled, - .recalc_rate = ep93xx_div_recalc_rate, - .round_rate = ep93xx_div_round_rate, - .set_rate = ep93xx_div_set_rate, -}; - -static struct clk_hw *clk_hw_register_div(const char *name, - const char *parent_name, - void __iomem *reg, - u8 enable_bit, - u8 shift, - u8 width, - char *clk_divisors, - u8 num_div) -{ - struct clk_init_data init; - struct clk_psc *psc; - struct clk *clk; - - psc = kzalloc(sizeof(*psc), GFP_KERNEL); - if (!psc) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &ep93xx_div_ops; - init.flags = 0; - init.parent_names = (parent_name ? &parent_name : NULL); - init.num_parents = 1; - - psc->reg = reg; - psc->bit_idx = enable_bit; - psc->mask = GENMASK(shift + width - 1, shift); - psc->shift = shift; - psc->div = clk_divisors; - psc->num_div = num_div; - psc->lock = &clk_lock; - psc->hw.init = &init; - - clk = clk_register(NULL, &psc->hw); - if (IS_ERR(clk)) { - kfree(psc); - return ERR_CAST(clk); - } - return &psc->hw; -} - -struct ep93xx_gate { - unsigned int bit; - const char *dev_id; - const char *con_id; -}; - -static struct ep93xx_gate ep93xx_uarts[] = { - {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL}, - {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL}, - {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL}, -}; - -static void __init ep93xx_uart_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - u32 value; - unsigned int clk_uart_div; - - value = __raw_readl(EP93XX_SYSCON_PWRCNT); - if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) - clk_uart_div = 1; - else - clk_uart_div = 2; - - hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div); - - /* parenting uart gate clocks to uart clock */ - for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) { - hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id, - "uart", - EP93XX_SYSCON_DEVCFG, - ep93xx_uarts[i].bit); - - clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id); - } -} - -static struct ep93xx_gate ep93xx_dmas[] = { - {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"}, - {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"}, -}; - -static void __init ep93xx_dma_clock_init(void) -{ - unsigned int i; - struct clk_hw *hw; - int ret; - - for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) { - hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id, - "hclk", 0, - EP93XX_SYSCON_PWRCNT, - ep93xx_dmas[i].bit, - 0, - &clk_lock); - - ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL); - if (ret) - pr_err("%s: failed to register lookup %s\n", - __func__, ep93xx_dmas[i].con_id); - } -} - -static int __init ep93xx_clock_init(void) -{ - u32 value; - struct clk_hw *hw; - unsigned long clk_pll1_rate; - unsigned long clk_f_rate; - unsigned long clk_h_rate; - unsigned long clk_p_rate; - unsigned long clk_pll2_rate; - unsigned int clk_f_div; - unsigned int clk_h_div; - unsigned int clk_p_div; - unsigned int clk_usb_div; - unsigned long clk_spi_div; - - hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE); - clk_hw_register_clkdev(hw, NULL, "xtali"); - - /* Determine the bootloader configured pll1 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET1); - if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) - clk_pll1_rate = EP93XX_EXT_CLK_RATE; - else - clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - - hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate); - clk_hw_register_clkdev(hw, NULL, "pll1"); - - /* Initialize the pll1 derived clocks */ - clk_f_div = fclk_divisors[(value >> 25) & 0x7]; - clk_h_div = hclk_divisors[(value >> 20) & 0x7]; - clk_p_div = pclk_divisors[(value >> 18) & 0x3]; - - hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div); - clk_f_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div); - clk_h_rate = clk_get_rate(hw->clk); - hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div); - clk_p_rate = clk_get_rate(hw->clk); - - clk_hw_register_clkdev(hw, "apb_pclk", NULL); - - ep93xx_dma_clock_init(); - - /* Determine the bootloader configured pll2 rate */ - value = __raw_readl(EP93XX_SYSCON_CLKSET2); - if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) - clk_pll2_rate = EP93XX_EXT_CLK_RATE; - else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) - clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); - else - clk_pll2_rate = 0; - - hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate); - clk_hw_register_clkdev(hw, NULL, "pll2"); - - /* Initialize the pll2 derived clocks */ - /* - * These four bits set the divide ratio between the PLL2 - * output and the USB clock. - * 0000 - Divide by 1 - * 0001 - Divide by 2 - * 0010 - Divide by 3 - * 0011 - Divide by 4 - * 0100 - Divide by 5 - * 0101 - Divide by 6 - * 0110 - Divide by 7 - * 0111 - Divide by 8 - * 1000 - Divide by 9 - * 1001 - Divide by 10 - * 1010 - Divide by 11 - * 1011 - Divide by 12 - * 1100 - Divide by 13 - * 1101 - Divide by 14 - * 1110 - Divide by 15 - * 1111 - Divide by 1 - * On power-on-reset these bits are reset to 0000b. - */ - clk_usb_div = (((value >> 28) & 0xf) + 1); - hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div); - hw = clk_hw_register_gate(NULL, "ohci-platform", - "usb_clk", 0, - EP93XX_SYSCON_PWRCNT, - EP93XX_SYSCON_PWRCNT_USH_EN, - 0, - &clk_lock); - clk_hw_register_clkdev(hw, NULL, "ohci-platform"); - - /* - * EP93xx SSP clock rate was doubled in version E2. For more information - * see: - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - clk_spi_div = 1; - if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) - clk_spi_div = 2; - hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div); - clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0"); - - /* pwm clock */ - hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1); - clk_hw_register_clkdev(hw, "pwm_clk", NULL); - - pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", - clk_pll1_rate / 1000000, clk_pll2_rate / 1000000); - pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", - clk_f_rate / 1000000, clk_h_rate / 1000000, - clk_p_rate / 1000000); - - ep93xx_uart_clock_init(); - - /* touchscreen/adc clock */ - hw = clk_hw_register_div("ep93xx-adc", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_TSEN, - EP93XX_SYSCON_KEYTCHCLKDIV_ADIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-adc"); - - /* keypad clock */ - hw = clk_hw_register_div("ep93xx-keypad", - "xtali", - EP93XX_SYSCON_KEYTCHCLKDIV, - EP93XX_SYSCON_KEYTCHCLKDIV_KEN, - EP93XX_SYSCON_KEYTCHCLKDIV_KDIV, - 1, - adc_divisors, - ARRAY_SIZE(adc_divisors)); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad"); - - /* On reset PDIV and VDIV is set to zero, while PDIV zero - * means clock disable, VDIV shouldn't be zero. - * So i set both dividers to minimum. - */ - /* ENA - Enable CLK divider. */ - /* PDIV - 00 - Disable clock */ - /* VDIV - at least 2 */ - /* Check and enable video clk registers */ - value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV); - - /* check and enable i2s clk registers */ - value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; - ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV); - - /* video clk */ - hw = clk_hw_register_ddiv("ep93xx-fb", - EP93XX_SYSCON_VIDCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, NULL, "ep93xx-fb"); - - /* i2s clk */ - hw = clk_hw_register_ddiv("mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_CLKDIV_ENABLE); - - clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s"); - - /* i2s sclk */ -#define EP93XX_I2SCLKDIV_SDIV_SHIFT 16 -#define EP93XX_I2SCLKDIV_SDIV_WIDTH 1 - hw = clk_hw_register_div("sclk", - "mclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_SDIV_SHIFT, - EP93XX_I2SCLKDIV_SDIV_WIDTH, - sclk_divisors, - ARRAY_SIZE(sclk_divisors)); - - clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s"); - - /* i2s lrclk */ -#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17 -#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3 - hw = clk_hw_register_div("lrclk", - "sclk", - EP93XX_SYSCON_I2SCLKDIV, - EP93XX_SYSCON_I2SCLKDIV_SENA, - EP93XX_I2SCLKDIV_LRDIV32_SHIFT, - EP93XX_I2SCLKDIV_LRDIV32_WIDTH, - lrclk_divisors, - ARRAY_SIZE(lrclk_divisors)); - - clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s"); - - return 0; -} -postcore_initcall(ep93xx_clock_init); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c deleted file mode 100644 index 9c6154bb37b5..000000000000 --- a/arch/arm/mach-ep93xx/core.c +++ /dev/null @@ -1,955 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/core.c - * Core routines for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2007 Herbert Valerio Riedel - * - * Thanks go to Michael Burian and Ray Lehtiniemi for their key - * role in the ep93xx linux community. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hardware.h" -#include -#include -#include -#include - -#include "gpio-ep93xx.h" - -#include -#include - -#include "soc.h" -#include "irqs.h" - -/************************************************************************* - * Static I/O mappings that are needed for all EP93xx platforms - *************************************************************************/ -static struct map_desc ep93xx_io_desc[] __initdata = { - { - .virtual = EP93XX_AHB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE), - .length = EP93XX_AHB_SIZE, - .type = MT_DEVICE, - }, { - .virtual = EP93XX_APB_VIRT_BASE, - .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE), - .length = EP93XX_APB_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init ep93xx_map_io(void) -{ - iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc)); -} - -/************************************************************************* - * EP93xx IRQ handling - *************************************************************************/ -void __init ep93xx_init_irq(void) -{ - vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0); - vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0); -} - - -/************************************************************************* - * EP93xx System Controller Software Locked register handling - *************************************************************************/ - -/* - * syscon_swlock prevents anything else from writing to the syscon - * block while a software locked register is being written. - */ -static DEFINE_SPINLOCK(syscon_swlock); - -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg) -{ - unsigned long flags; - - spin_lock_irqsave(&syscon_swlock, flags); - - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, reg); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&syscon_swlock, flags); - - val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val &= ~clear_bits; - val |= set_bits; - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(val, EP93XX_SYSCON_DEVCFG); - - spin_unlock_irqrestore(&syscon_swlock, flags); -} - -/** - * ep93xx_chip_revision() - returns the EP93xx chip revision - * - * See "platform.h" for more information. - */ -unsigned int ep93xx_chip_revision(void) -{ - unsigned int v; - - v = __raw_readl(EP93XX_SYSCON_SYSCFG); - v &= EP93XX_SYSCON_SYSCFG_REV_MASK; - v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT; - return v; -} -EXPORT_SYMBOL_GPL(ep93xx_chip_revision); - -/************************************************************************* - * EP93xx GPIO - *************************************************************************/ -/* port A */ -static struct resource ep93xx_a_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x10, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x90, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), -}; - -static struct platform_device ep93xx_a_gpio = { - .name = "gpio-ep93xx", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_a_gpio_resources), - .resource = ep93xx_a_gpio_resources, -}; - -/* port B */ -static struct resource ep93xx_b_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x04, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x14, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0xac, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO_AB), -}; - -static struct platform_device ep93xx_b_gpio = { - .name = "gpio-ep93xx", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_b_gpio_resources), - .resource = ep93xx_b_gpio_resources, -}; - -/* port C */ -static struct resource ep93xx_c_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x08, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x18, 0x04, "dir"), -}; - -static struct platform_device ep93xx_c_gpio = { - .name = "gpio-ep93xx", - .id = 2, - .num_resources = ARRAY_SIZE(ep93xx_c_gpio_resources), - .resource = ep93xx_c_gpio_resources, -}; - -/* port D */ -static struct resource ep93xx_d_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x0c, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x1c, 0x04, "dir"), -}; - -static struct platform_device ep93xx_d_gpio = { - .name = "gpio-ep93xx", - .id = 3, - .num_resources = ARRAY_SIZE(ep93xx_d_gpio_resources), - .resource = ep93xx_d_gpio_resources, -}; - -/* port E */ -static struct resource ep93xx_e_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x20, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x24, 0x04, "dir"), -}; - -static struct platform_device ep93xx_e_gpio = { - .name = "gpio-ep93xx", - .id = 4, - .num_resources = ARRAY_SIZE(ep93xx_e_gpio_resources), - .resource = ep93xx_e_gpio_resources, -}; - -/* port F */ -static struct resource ep93xx_f_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x30, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x34, 0x04, "dir"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x4c, 0x1c, "intr"), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO0MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO1MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO2MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO3MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO4MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO5MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO6MUX), - DEFINE_RES_IRQ(IRQ_EP93XX_GPIO7MUX), -}; - -static struct platform_device ep93xx_f_gpio = { - .name = "gpio-ep93xx", - .id = 5, - .num_resources = ARRAY_SIZE(ep93xx_f_gpio_resources), - .resource = ep93xx_f_gpio_resources, -}; - -/* port G */ -static struct resource ep93xx_g_gpio_resources[] = { - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x38, 0x04, "data"), - DEFINE_RES_MEM_NAMED(EP93XX_GPIO_PHYS_BASE + 0x3c, 0x04, "dir"), -}; - -static struct platform_device ep93xx_g_gpio = { - .name = "gpio-ep93xx", - .id = 6, - .num_resources = ARRAY_SIZE(ep93xx_g_gpio_resources), - .resource = ep93xx_g_gpio_resources, -}; - -static struct platform_device *ep93xx_gpio_device[] __initdata = { - &ep93xx_a_gpio, - &ep93xx_b_gpio, - &ep93xx_c_gpio, - &ep93xx_d_gpio, - &ep93xx_e_gpio, - &ep93xx_f_gpio, - &ep93xx_g_gpio, -}; - -/************************************************************************* - * EP93xx peripheral handling - *************************************************************************/ -#define EP93XX_UART_MCR_OFFSET (0x0100) - -static void ep93xx_uart_set_mctrl(struct amba_device *dev, - void __iomem *base, unsigned int mctrl) -{ - unsigned int mcr; - - mcr = 0; - if (mctrl & TIOCM_RTS) - mcr |= 2; - if (mctrl & TIOCM_DTR) - mcr |= 1; - - __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); -} - -static struct amba_pl010_data ep93xx_uart_data = { - .set_mctrl = ep93xx_uart_set_mctrl, -}; - -static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE, - { IRQ_EP93XX_UART1 }, &ep93xx_uart_data); - -static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE, - { IRQ_EP93XX_UART2 }, NULL); - -static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE, - { IRQ_EP93XX_UART3 }, &ep93xx_uart_data); - -static struct resource ep93xx_rtc_resource[] = { - DEFINE_RES_MEM(EP93XX_RTC_PHYS_BASE, 0x10c), -}; - -static struct platform_device ep93xx_rtc_device = { - .name = "ep93xx-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_rtc_resource), - .resource = ep93xx_rtc_resource, -}; - -/************************************************************************* - * EP93xx OHCI USB Host - *************************************************************************/ - -static struct clk *ep93xx_ohci_host_clock; - -static int ep93xx_ohci_power_on(struct platform_device *pdev) -{ - if (!ep93xx_ohci_host_clock) { - ep93xx_ohci_host_clock = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(ep93xx_ohci_host_clock)) - return PTR_ERR(ep93xx_ohci_host_clock); - } - - return clk_prepare_enable(ep93xx_ohci_host_clock); -} - -static void ep93xx_ohci_power_off(struct platform_device *pdev) -{ - clk_disable(ep93xx_ohci_host_clock); -} - -static struct usb_ohci_pdata ep93xx_ohci_pdata = { - .power_on = ep93xx_ohci_power_on, - .power_off = ep93xx_ohci_power_off, - .power_suspend = ep93xx_ohci_power_off, -}; - -static struct resource ep93xx_ohci_resources[] = { - DEFINE_RES_MEM(EP93XX_USB_PHYS_BASE, 0x1000), - DEFINE_RES_IRQ(IRQ_EP93XX_USB), -}; - -static u64 ep93xx_ohci_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_ohci_device = { - .name = "ohci-platform", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ohci_resources), - .resource = ep93xx_ohci_resources, - .dev = { - .dma_mask = &ep93xx_ohci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &ep93xx_ohci_pdata, - }, -}; - -/************************************************************************* - * EP93xx physmap'ed flash - *************************************************************************/ -static struct physmap_flash_data ep93xx_flash_data; - -static struct resource ep93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ep93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ep93xx_flash_data, - }, - .num_resources = 1, - .resource = &ep93xx_flash_resource, -}; - -/** - * ep93xx_register_flash() - Register the external flash device. - * @width: bank width in octets - * @start: resource start address - * @size: resource size - */ -void __init ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - ep93xx_flash_data.width = width; - - ep93xx_flash_resource.start = start; - ep93xx_flash_resource.end = start + size - 1; - - platform_device_register(&ep93xx_flash); -} - - -/************************************************************************* - * EP93xx ethernet peripheral handling - *************************************************************************/ -static struct ep93xx_eth_data ep93xx_eth_data; - -static struct resource ep93xx_eth_resource[] = { - DEFINE_RES_MEM(EP93XX_ETHERNET_PHYS_BASE, 0x10000), - DEFINE_RES_IRQ(IRQ_EP93XX_ETHERNET), -}; - -static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_eth_device = { - .name = "ep93xx-eth", - .id = -1, - .dev = { - .platform_data = &ep93xx_eth_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_eth_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_eth_resource), - .resource = ep93xx_eth_resource, -}; - -/** - * ep93xx_register_eth - Register the built-in ethernet platform device. - * @data: platform specific ethernet configuration (__initdata) - * @copy_addr: flag indicating that the MAC address should be copied - * from the IndAd registers (as programmed by the bootloader) - */ -void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr) -{ - if (copy_addr) - memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6); - - ep93xx_eth_data = *data; - platform_device_register(&ep93xx_eth_device); -} - - -/************************************************************************* - * EP93xx i2c peripheral handling - *************************************************************************/ - -/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */ -static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - /* Use local offsets on gpiochip/port "G" */ - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - { } - }, -}; - -static struct platform_device ep93xx_i2c_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/** - * ep93xx_register_i2c - Register the i2c platform device. - * @devices: platform specific i2c bus device information (__initdata) - * @num: the number of devices on the i2c bus - */ -void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num) -{ - /* - * FIXME: this just sets the two pins as non-opendrain, as no - * platforms tries to do that anyway. Flag the applicable lines - * as open drain in the GPIO_LOOKUP above and the driver or - * gpiolib will handle open drain/open drain emulation as need - * be. Right now i2c-gpio emulates open drain which is not - * optimal. - */ - __raw_writel((0 << 1) | (0 << 0), - EP93XX_GPIO_EEDRIVE); - - i2c_register_board_info(0, devices, num); - gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table); - platform_device_register(&ep93xx_i2c_device); -} - -/************************************************************************* - * EP93xx SPI peripheral handling - *************************************************************************/ -static struct ep93xx_spi_info ep93xx_spi_master_data; - -static struct resource ep93xx_spi_resources[] = { - DEFINE_RES_MEM(EP93XX_SPI_PHYS_BASE, 0x18), - DEFINE_RES_IRQ(IRQ_EP93XX_SSP), -}; - -static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_spi_device = { - .name = "ep93xx-spi", - .id = 0, - .dev = { - .platform_data = &ep93xx_spi_master_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_spi_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_spi_resources), - .resource = ep93xx_spi_resources, -}; - -/** - * ep93xx_register_spi() - registers spi platform device - * @info: ep93xx board specific spi master info (__initdata) - * @devices: SPI devices to register (__initdata) - * @num: number of SPI devices to register - * - * This function registers platform device for the EP93xx SPI controller and - * also makes sure that SPI pins are muxed so that I2S is not using those pins. - */ -void __init ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num) -{ - /* - * When SPI is used, we need to make sure that I2S is muxed off from - * SPI pins. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP); - - ep93xx_spi_master_data = *info; - spi_register_board_info(devices, num); - platform_device_register(&ep93xx_spi_device); -} - -/************************************************************************* - * EP93xx LEDs - *************************************************************************/ -static const struct gpio_led ep93xx_led_pins[] __initconst = { - { - .name = "platform:grled", - }, { - .name = "platform:rdled", - }, -}; - -static const struct gpio_led_platform_data ep93xx_led_data __initconst = { - .num_leds = ARRAY_SIZE(ep93xx_led_pins), - .leds = ep93xx_led_pins, -}; - -static struct gpiod_lookup_table ep93xx_leds_gpio_table = { - .dev_id = "leds-gpio", - .table = { - /* Use local offsets on gpiochip/port "E" */ - GPIO_LOOKUP_IDX("gpio-ep93xx.4", 0, NULL, 0, GPIO_ACTIVE_HIGH), - GPIO_LOOKUP_IDX("gpio-ep93xx.4", 1, NULL, 1, GPIO_ACTIVE_HIGH), - { } - }, -}; - -/************************************************************************* - * EP93xx pwm peripheral handling - *************************************************************************/ -static struct resource ep93xx_pwm0_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE, 0x10), -}; - -static struct platform_device ep93xx_pwm0_device = { - .name = "ep93xx-pwm", - .id = 0, - .num_resources = ARRAY_SIZE(ep93xx_pwm0_resource), - .resource = ep93xx_pwm0_resource, -}; - -static struct resource ep93xx_pwm1_resource[] = { - DEFINE_RES_MEM(EP93XX_PWM_PHYS_BASE + 0x20, 0x10), -}; - -static struct platform_device ep93xx_pwm1_device = { - .name = "ep93xx-pwm", - .id = 1, - .num_resources = ARRAY_SIZE(ep93xx_pwm1_resource), - .resource = ep93xx_pwm1_resource, -}; - -void __init ep93xx_register_pwm(int pwm0, int pwm1) -{ - if (pwm0) - platform_device_register(&ep93xx_pwm0_device); - - /* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */ - if (pwm1) - platform_device_register(&ep93xx_pwm1_device); -} - -/************************************************************************* - * EP93xx video peripheral handling - *************************************************************************/ -static struct ep93xxfb_mach_info ep93xxfb_data; - -static struct resource ep93xx_fb_resource[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE, 0x800), -}; - -static struct platform_device ep93xx_fb_device = { - .name = "ep93xx-fb", - .id = -1, - .dev = { - .platform_data = &ep93xxfb_data, - .coherent_dma_mask = DMA_BIT_MASK(32), - .dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask, - }, - .num_resources = ARRAY_SIZE(ep93xx_fb_resource), - .resource = ep93xx_fb_resource, -}; - -/* The backlight use a single register in the framebuffer's register space */ -#define EP93XX_RASTER_REG_BRIGHTNESS 0x20 - -static struct resource ep93xx_bl_resources[] = { - DEFINE_RES_MEM(EP93XX_RASTER_PHYS_BASE + - EP93XX_RASTER_REG_BRIGHTNESS, 0x04), -}; - -static struct platform_device ep93xx_bl_device = { - .name = "ep93xx-bl", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_bl_resources), - .resource = ep93xx_bl_resources, -}; - -/** - * ep93xx_register_fb - Register the framebuffer platform device. - * @data: platform specific framebuffer configuration (__initdata) - */ -void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) -{ - ep93xxfb_data = *data; - platform_device_register(&ep93xx_fb_device); - platform_device_register(&ep93xx_bl_device); -} - - -/************************************************************************* - * EP93xx matrix keypad peripheral handling - *************************************************************************/ -static struct ep93xx_keypad_platform_data ep93xx_keypad_data; - -static struct resource ep93xx_keypad_resource[] = { - DEFINE_RES_MEM(EP93XX_KEY_MATRIX_PHYS_BASE, 0x0c), - DEFINE_RES_IRQ(IRQ_EP93XX_KEY), -}; - -static struct platform_device ep93xx_keypad_device = { - .name = "ep93xx-keypad", - .id = -1, - .dev = { - .platform_data = &ep93xx_keypad_data, - }, - .num_resources = ARRAY_SIZE(ep93xx_keypad_resource), - .resource = ep93xx_keypad_resource, -}; - -/** - * ep93xx_register_keypad - Register the keypad platform device. - * @data: platform specific keypad configuration (__initdata) - */ -void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data) -{ - ep93xx_keypad_data = *data; - platform_device_register(&ep93xx_keypad_device); -} - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ(IRQ_EP93XX_SAI), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -static struct platform_device ep93xx_pcm_device = { - .name = "ep93xx-pcm-audio", - .id = -1, -}; - -void __init ep93xx_register_i2s(void) -{ - platform_device_register(&ep93xx_i2s_device); - platform_device_register(&ep93xx_pcm_device); -} - -#define EP93XX_SYSCON_DEVCFG_I2S_MASK (EP93XX_SYSCON_DEVCFG_I2SONSSP | \ - EP93XX_SYSCON_DEVCFG_I2SONAC97) - -#define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ - EP93XX_SYSCON_I2SCLKDIV_SPOL) - -int ep93xx_i2s_acquire(void) -{ - unsigned val; - - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, - EP93XX_SYSCON_DEVCFG_I2S_MASK); - - /* - * This is potentially racy with the clock api for i2s_mclk, sclk and - * lrclk. Since the i2s driver is the only user of those clocks we - * rely on it to prevent parallel use of this function and the - * clock api for the i2s clocks. - */ - val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); - val &= ~EP93XX_I2SCLKDIV_MASK; - val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; - ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); - - return 0; -} -EXPORT_SYMBOL(ep93xx_i2s_acquire); - -void ep93xx_i2s_release(void) -{ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); -} -EXPORT_SYMBOL(ep93xx_i2s_release); - -/************************************************************************* - * EP93xx AC97 audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_ac97_resources[] = { - DEFINE_RES_MEM(EP93XX_AAC_PHYS_BASE, 0xac), - DEFINE_RES_IRQ(IRQ_EP93XX_AACINTR), -}; - -static struct platform_device ep93xx_ac97_device = { - .name = "ep93xx-ac97", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_ac97_resources), - .resource = ep93xx_ac97_resources, -}; - -void __init ep93xx_register_ac97(void) -{ - /* - * Make sure that the AC97 pins are not used by I2S. - */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - - platform_device_register(&ep93xx_ac97_device); - platform_device_register(&ep93xx_pcm_device); -} - -/************************************************************************* - * EP93xx Watchdog - *************************************************************************/ -static struct resource ep93xx_wdt_resources[] = { - DEFINE_RES_MEM(EP93XX_WATCHDOG_PHYS_BASE, 0x08), -}; - -static struct platform_device ep93xx_wdt_device = { - .name = "ep93xx-wdt", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_wdt_resources), - .resource = ep93xx_wdt_resources, -}; - -/************************************************************************* - * EP93xx IDE - *************************************************************************/ -static struct resource ep93xx_ide_resources[] = { - DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), - DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), -}; - -static struct platform_device ep93xx_ide_device = { - .name = "ep93xx-ide", - .id = -1, - .dev = { - .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(ep93xx_ide_resources), - .resource = ep93xx_ide_resources, -}; - -void __init ep93xx_register_ide(void) -{ - platform_device_register(&ep93xx_ide_device); -} - -/************************************************************************* - * EP93xx ADC - *************************************************************************/ -static struct resource ep93xx_adc_resources[] = { - DEFINE_RES_MEM(EP93XX_ADC_PHYS_BASE, 0x28), - DEFINE_RES_IRQ(IRQ_EP93XX_TOUCH), -}; - -static struct platform_device ep93xx_adc_device = { - .name = "ep93xx-adc", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_adc_resources), - .resource = ep93xx_adc_resources, -}; - -void __init ep93xx_register_adc(void) -{ - /* Power up ADC, deactivate Touch Screen Controller */ - ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_TIN, - EP93XX_SYSCON_DEVCFG_ADCPD); - - platform_device_register(&ep93xx_adc_device); -} - -/************************************************************************* - * EP93xx Security peripheral - *************************************************************************/ - -/* - * The Maverick Key is 256 bits of micro fuses blown at the factory during - * manufacturing to uniquely identify a part. - * - * See: http://arm.cirrus.com/forum/viewtopic.php?t=486&highlight=maverick+key - */ -#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x)) -#define EP93XX_SECURITY_SECFLG EP93XX_SECURITY_REG(0x2400) -#define EP93XX_SECURITY_FUSEFLG EP93XX_SECURITY_REG(0x2410) -#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440) -#define EP93XX_SECURITY_UNIQCHK EP93XX_SECURITY_REG(0x2450) -#define EP93XX_SECURITY_UNIQVAL EP93XX_SECURITY_REG(0x2460) -#define EP93XX_SECURITY_SECID1 EP93XX_SECURITY_REG(0x2500) -#define EP93XX_SECURITY_SECID2 EP93XX_SECURITY_REG(0x2504) -#define EP93XX_SECURITY_SECCHK1 EP93XX_SECURITY_REG(0x2520) -#define EP93XX_SECURITY_SECCHK2 EP93XX_SECURITY_REG(0x2524) -#define EP93XX_SECURITY_UNIQID2 EP93XX_SECURITY_REG(0x2700) -#define EP93XX_SECURITY_UNIQID3 EP93XX_SECURITY_REG(0x2704) -#define EP93XX_SECURITY_UNIQID4 EP93XX_SECURITY_REG(0x2708) -#define EP93XX_SECURITY_UNIQID5 EP93XX_SECURITY_REG(0x270c) - -static char ep93xx_soc_id[33]; - -static const char __init *ep93xx_get_soc_id(void) -{ - unsigned int id, id2, id3, id4, id5; - - if (__raw_readl(EP93XX_SECURITY_UNIQVAL) != 1) - return "bad Hamming code"; - - id = __raw_readl(EP93XX_SECURITY_UNIQID); - id2 = __raw_readl(EP93XX_SECURITY_UNIQID2); - id3 = __raw_readl(EP93XX_SECURITY_UNIQID3); - id4 = __raw_readl(EP93XX_SECURITY_UNIQID4); - id5 = __raw_readl(EP93XX_SECURITY_UNIQID5); - - if (id != id2) - return "invalid"; - - /* Toss the unique ID into the entropy pool */ - add_device_randomness(&id2, 4); - add_device_randomness(&id3, 4); - add_device_randomness(&id4, 4); - add_device_randomness(&id5, 4); - - snprintf(ep93xx_soc_id, sizeof(ep93xx_soc_id), - "%08x%08x%08x%08x", id2, id3, id4, id5); - - return ep93xx_soc_id; -} - -static const char __init *ep93xx_get_soc_rev(void) -{ - int rev = ep93xx_chip_revision(); - - switch (rev) { - case EP93XX_CHIP_REV_D0: - return "D0"; - case EP93XX_CHIP_REV_D1: - return "D1"; - case EP93XX_CHIP_REV_E0: - return "E0"; - case EP93XX_CHIP_REV_E1: - return "E1"; - case EP93XX_CHIP_REV_E2: - return "E2"; - default: - return "unknown"; - } -} - -static const char __init *ep93xx_get_machine_name(void) -{ - return kasprintf(GFP_KERNEL,"%s", machine_desc->name); -} - -static struct device __init *ep93xx_init_soc(void) -{ - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - return NULL; - - soc_dev_attr->machine = ep93xx_get_machine_name(); - soc_dev_attr->family = "Cirrus Logic EP93xx"; - soc_dev_attr->revision = ep93xx_get_soc_rev(); - soc_dev_attr->soc_id = ep93xx_get_soc_id(); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->machine); - kfree(soc_dev_attr); - return NULL; - } - - return soc_device_to_device(soc_dev); -} - -struct device __init *ep93xx_init_devices(void) -{ - struct device *parent; - unsigned int i; - - /* Disallow access to MaverickCrunch initially */ - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - - /* Default all ports to GPIO */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - parent = ep93xx_init_soc(); - - /* Get the GPIO working early, other devices need it */ - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_device); i++) - platform_device_register(ep93xx_gpio_device[i]); - - amba_device_register(&uart1_device, &iomem_resource); - amba_device_register(&uart2_device, &iomem_resource); - amba_device_register(&uart3_device, &iomem_resource); - - platform_device_register(&ep93xx_rtc_device); - platform_device_register(&ep93xx_ohci_device); - platform_device_register(&ep93xx_wdt_device); - - gpiod_add_lookup_table(&ep93xx_leds_gpio_table); - gpio_led_register_device(-1, &ep93xx_led_data); - - return parent; -} - -void ep93xx_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Set then clear the SWRST bit to initiate a software reset - */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST); - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST); - - while (1) - ; -} diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c deleted file mode 100644 index 74515acab8ef..000000000000 --- a/arch/arm/mach-ep93xx/dma.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/dma.c - * - * Platform support code for the EP93xx dmaengine driver. - * - * Copyright (C) 2011 Mika Westerberg - * - * This work is based on the original dma-m2p implementation with - * following copyrights: - * - * Copyright (C) 2006 Lennert Buytenhek - * Copyright (C) 2006 Applied Data Systems - * Copyright (C) 2009 Ryan Mallon - */ - -#include -#include -#include -#include -#include -#include - -#include -#include "hardware.h" - -#include "soc.h" - -#define DMA_CHANNEL(_name, _base, _irq) \ - { .name = (_name), .base = (_base), .irq = (_irq) } - -/* - * DMA M2P channels. - * - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { - DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), - DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), - DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), - DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), - DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), - DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), - DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), - DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), - DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), - DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { - .channels = ep93xx_dma_m2p_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), -}; - -static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2p_device = { - .name = "ep93xx-dma-m2p", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2p_data, - .dma_mask = &ep93xx_dma_m2p_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -/* - * DMA M2M channels. - * - * There are 2 M2M channels which support memcpy/memset and in addition simple - * hardware requests from/to SSP and IDE. We do not implement an external - * hardware requests. - * - * Registers are mapped statically in ep93xx_map_io(). - */ -static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { - DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), - DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), -}; - -static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { - .channels = ep93xx_dma_m2m_channels, - .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), -}; - -static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32); - -static struct platform_device ep93xx_dma_m2m_device = { - .name = "ep93xx-dma-m2m", - .id = -1, - .dev = { - .platform_data = &ep93xx_dma_m2m_data, - .dma_mask = &ep93xx_dma_m2m_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -static int __init ep93xx_dma_init(void) -{ - platform_device_register(&ep93xx_dma_m2p_device); - platform_device_register(&ep93xx_dma_m2m_device); - return 0; -} -arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c deleted file mode 100644 index 356b0460c7ed..000000000000 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/edb93xx.c - * Cirrus Logic EDB93xx Development Board support. - * - * EDB93XX, EDB9301, EDB9307A - * Copyright (C) 2008-2009 H Hartley Sweeten - * - * EDB9302 - * Copyright (C) 2006 George Kashperko - * - * EDB9302A, EDB9315, EDB9315A - * Copyright (C) 2006 Lennert Buytenhek - * - * EDB9307 - * Copyright (C) 2007 Herbert Valerio Riedel - * - * EDB9312 - * Copyright (C) 2006 Infosys Technologies Limited - * Toufeeq Hussain - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "hardware.h" -#include -#include -#include "gpio-ep93xx.h" - -#include -#include - -#include "soc.h" - -static void __init edb93xx_register_flash(void) -{ - if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { - ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); - } else { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } -} - -static struct ep93xx_eth_data __initdata edb93xx_eth_data = { - .phy_id = 1, -}; - - -/************************************************************************* - * EDB93xx i2c peripheral handling - *************************************************************************/ - -static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - }, -}; - -static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1337", 0x68), - }, -}; - -static void __init edb93xx_register_i2c(void) -{ - if (machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()) { - ep93xx_register_i2c(edb93xxa_i2c_board_info, - ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9302() || machine_is_edb9307() - || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(edb93xx_i2c_board_info, - ARRAY_SIZE(edb93xx_i2c_board_info)); - } -} - - -/************************************************************************* - * EDB93xx SPI peripheral handling - *************************************************************************/ -static struct cs4271_platform_data edb93xx_cs4271_data = { - /* Intentionally left blank */ -}; - -static struct spi_board_info edb93xx_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &edb93xx_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table edb93xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("gpio-ep93xx.0", 6, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info edb93xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = { - .dev_id = "spi0.0", /* CS0 on SPI0 */ - .table = { - GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static void __init edb93xx_register_spi(void) -{ - if (machine_is_edb9301() || machine_is_edb9302()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table); - else if (machine_is_edb9302a() || machine_is_edb9307a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table); - else if (machine_is_edb9315a()) - gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table); - - gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table); - ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info, - ARRAY_SIZE(edb93xx_spi_board_info)); -} - - -/************************************************************************* - * EDB93xx I2S - *************************************************************************/ -static struct platform_device edb93xx_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static int __init edb93xx_has_audio(void) -{ - return (machine_is_edb9301() || machine_is_edb9302() || - machine_is_edb9302a() || machine_is_edb9307a() || - machine_is_edb9315a()); -} - -static void __init edb93xx_register_i2s(void) -{ - if (edb93xx_has_audio()) { - ep93xx_register_i2s(); - platform_device_register(&edb93xx_audio_device); - } -} - - -/************************************************************************* - * EDB93xx pwm - *************************************************************************/ -static void __init edb93xx_register_pwm(void) -{ - if (machine_is_edb9301() || - machine_is_edb9302() || machine_is_edb9302a()) { - /* EP9301 and EP9302 only have pwm.1 (EGPIO14) */ - ep93xx_register_pwm(0, 1); - } else if (machine_is_edb9307() || machine_is_edb9307a()) { - /* EP9307 only has pwm.0 (PWMOUT) */ - ep93xx_register_pwm(1, 0); - } else { - /* EP9312 and EP9315 have both */ - ep93xx_register_pwm(1, 1); - } -} - - -/************************************************************************* - * EDB93xx framebuffer - *************************************************************************/ -static struct ep93xxfb_mach_info __initdata edb93xxfb_info = { - .flags = 0, -}; - -static int __init edb93xx_has_fb(void) -{ - /* These platforms have an ep93xx with video capability */ - return machine_is_edb9307() || machine_is_edb9307a() || - machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_fb(void) -{ - if (!edb93xx_has_fb()) - return; - - if (machine_is_edb9307a() || machine_is_edb9315a()) - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0; - else - edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3; - - ep93xx_register_fb(&edb93xxfb_info); -} - - -/************************************************************************* - * EDB93xx IDE - *************************************************************************/ -static int __init edb93xx_has_ide(void) -{ - /* - * Although EDB9312 and EDB9315 do have IDE capability, they have - * INTRQ line wired as pull-up, which makes using IDE interface - * problematic. - */ - return machine_is_edb9312() || machine_is_edb9315() || - machine_is_edb9315a(); -} - -static void __init edb93xx_register_ide(void) -{ - if (!edb93xx_has_ide()) - return; - - ep93xx_register_ide(); -} - - -static void __init edb93xx_init_machine(void) -{ - ep93xx_init_devices(); - edb93xx_register_flash(); - ep93xx_register_eth(&edb93xx_eth_data, 1); - edb93xx_register_i2c(); - edb93xx_register_spi(); - edb93xx_register_i2s(); - edb93xx_register_pwm(); - edb93xx_register_fb(); - edb93xx_register_ide(); - ep93xx_register_adc(); -} - - -#ifdef CONFIG_MACH_EDB9301 -MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302 -MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board") - /* Maintainer: George Kashperko */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9302A -MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307 -MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board") - /* Maintainer: Herbert Valerio Riedel */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9307A -MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9312 -MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board") - /* Maintainer: Toufeeq Hussain */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315 -MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_EDB9315A -MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ep93xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = edb93xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ep93xx/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h deleted file mode 100644 index 8fa3646de0a4..000000000000 --- a/arch/arm/mach-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x)) -#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x)) - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - -#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x)) -#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x)) - -/* APB UARTs */ -#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000) -#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000) - -#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000) -#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000) - -#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000) -#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000) - -#endif diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h deleted file mode 100644 index 7b46eb7e5507..000000000000 --- a/arch/arm/mach-ep93xx/gpio-ep93xx.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Include file for the EP93XX GPIO controller machine specifics */ - -#ifndef __GPIO_EP93XX_H -#define __GPIO_EP93XX_H - -#include "ep93xx-regs.h" - -#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) -#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) -#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8) - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -#endif /* __GPIO_EP93XX_H */ diff --git a/arch/arm/mach-ep93xx/hardware.h b/arch/arm/mach-ep93xx/hardware.h deleted file mode 100644 index e7d850e04782..000000000000 --- a/arch/arm/mach-ep93xx/hardware.h +++ /dev/null @@ -1,25 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/hardware.h - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "platform.h" - -/* - * The EP93xx has two external crystal oscillators. To generate the - * required high-frequency clocks, the processor uses two phase-locked- - * loops (PLLs) to multiply the incoming external clock signal to much - * higher frequencies that are then divided down by programmable dividers - * to produce the needed clocks. The PLLs operate independently of one - * another. - */ -#define EP93XX_EXT_CLK_RATE 14745600 -#define EP93XX_EXT_RTC_RATE 32768 - -#define EP93XX_KEYTCHCLK_DIV4 (EP93XX_EXT_CLK_RATE / 4) -#define EP93XX_KEYTCHCLK_DIV16 (EP93XX_EXT_CLK_RATE / 16) - -#endif diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h deleted file mode 100644 index 353201b90c66..000000000000 --- a/arch/arm/mach-ep93xx/irqs.h +++ /dev/null @@ -1,76 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_VIC0 1 - -#define IRQ_EP93XX_COMMRX (IRQ_EP93XX_VIC0 + 2) -#define IRQ_EP93XX_COMMTX (IRQ_EP93XX_VIC0 + 3) -#define IRQ_EP93XX_TIMER1 (IRQ_EP93XX_VIC0 + 4) -#define IRQ_EP93XX_TIMER2 (IRQ_EP93XX_VIC0 + 5) -#define IRQ_EP93XX_AACINTR (IRQ_EP93XX_VIC0 + 6) -#define IRQ_EP93XX_DMAM2P0 (IRQ_EP93XX_VIC0 + 7) -#define IRQ_EP93XX_DMAM2P1 (IRQ_EP93XX_VIC0 + 8) -#define IRQ_EP93XX_DMAM2P2 (IRQ_EP93XX_VIC0 + 9) -#define IRQ_EP93XX_DMAM2P3 (IRQ_EP93XX_VIC0 + 10) -#define IRQ_EP93XX_DMAM2P4 (IRQ_EP93XX_VIC0 + 11) -#define IRQ_EP93XX_DMAM2P5 (IRQ_EP93XX_VIC0 + 12) -#define IRQ_EP93XX_DMAM2P6 (IRQ_EP93XX_VIC0 + 13) -#define IRQ_EP93XX_DMAM2P7 (IRQ_EP93XX_VIC0 + 14) -#define IRQ_EP93XX_DMAM2P8 (IRQ_EP93XX_VIC0 + 15) -#define IRQ_EP93XX_DMAM2P9 (IRQ_EP93XX_VIC0 + 16) -#define IRQ_EP93XX_DMAM2M0 (IRQ_EP93XX_VIC0 + 17) -#define IRQ_EP93XX_DMAM2M1 (IRQ_EP93XX_VIC0 + 18) -#define IRQ_EP93XX_GPIO0MUX (IRQ_EP93XX_VIC0 + 19) -#define IRQ_EP93XX_GPIO1MUX (IRQ_EP93XX_VIC0 + 20) -#define IRQ_EP93XX_GPIO2MUX (IRQ_EP93XX_VIC0 + 21) -#define IRQ_EP93XX_GPIO3MUX (IRQ_EP93XX_VIC0 + 22) -#define IRQ_EP93XX_UART1RX (IRQ_EP93XX_VIC0 + 23) -#define IRQ_EP93XX_UART1TX (IRQ_EP93XX_VIC0 + 24) -#define IRQ_EP93XX_UART2RX (IRQ_EP93XX_VIC0 + 25) -#define IRQ_EP93XX_UART2TX (IRQ_EP93XX_VIC0 + 26) -#define IRQ_EP93XX_UART3RX (IRQ_EP93XX_VIC0 + 27) -#define IRQ_EP93XX_UART3TX (IRQ_EP93XX_VIC0 + 28) -#define IRQ_EP93XX_KEY (IRQ_EP93XX_VIC0 + 29) -#define IRQ_EP93XX_TOUCH (IRQ_EP93XX_VIC0 + 30) -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_VIC1 (IRQ_EP93XX_VIC0 + 32) - -#define IRQ_EP93XX_EXT0 (IRQ_EP93XX_VIC1 + 0) -#define IRQ_EP93XX_EXT1 (IRQ_EP93XX_VIC1 + 1) -#define IRQ_EP93XX_EXT2 (IRQ_EP93XX_VIC1 + 2) -#define IRQ_EP93XX_64HZ (IRQ_EP93XX_VIC1 + 3) -#define IRQ_EP93XX_WATCHDOG (IRQ_EP93XX_VIC1 + 4) -#define IRQ_EP93XX_RTC (IRQ_EP93XX_VIC1 + 5) -#define IRQ_EP93XX_IRDA (IRQ_EP93XX_VIC1 + 6) -#define IRQ_EP93XX_ETHERNET (IRQ_EP93XX_VIC1 + 7) -#define IRQ_EP93XX_EXT3 (IRQ_EP93XX_VIC1 + 8) -#define IRQ_EP93XX_PROG (IRQ_EP93XX_VIC1 + 9) -#define IRQ_EP93XX_1HZ (IRQ_EP93XX_VIC1 + 10) -#define IRQ_EP93XX_VSYNC (IRQ_EP93XX_VIC1 + 11) -#define IRQ_EP93XX_VIDEO_FIFO (IRQ_EP93XX_VIC1 + 12) -#define IRQ_EP93XX_SSP1RX (IRQ_EP93XX_VIC1 + 13) -#define IRQ_EP93XX_SSP1TX (IRQ_EP93XX_VIC1 + 14) -#define IRQ_EP93XX_GPIO4MUX (IRQ_EP93XX_VIC1 + 15) -#define IRQ_EP93XX_GPIO5MUX (IRQ_EP93XX_VIC1 + 16) -#define IRQ_EP93XX_GPIO6MUX (IRQ_EP93XX_VIC1 + 17) -#define IRQ_EP93XX_GPIO7MUX (IRQ_EP93XX_VIC1 + 18) -#define IRQ_EP93XX_TIMER3 (IRQ_EP93XX_VIC1 + 19) -#define IRQ_EP93XX_UART1 (IRQ_EP93XX_VIC1 + 20) -#define IRQ_EP93XX_SSP (IRQ_EP93XX_VIC1 + 21) -#define IRQ_EP93XX_UART2 (IRQ_EP93XX_VIC1 + 22) -#define IRQ_EP93XX_UART3 (IRQ_EP93XX_VIC1 + 23) -#define IRQ_EP93XX_USB (IRQ_EP93XX_VIC1 + 24) -#define IRQ_EP93XX_ETHERNET_PME (IRQ_EP93XX_VIC1 + 25) -#define IRQ_EP93XX_DSP (IRQ_EP93XX_VIC1 + 26) -#define IRQ_EP93XX_GPIO_AB (IRQ_EP93XX_VIC1 + 27) -#define IRQ_EP93XX_SAI (IRQ_EP93XX_VIC1 + 28) -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (IRQ_EP93XX_VIC1 + 32 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#endif diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h deleted file mode 100644 index 5fb1b919133f..000000000000 --- a/arch/arm/mach-ep93xx/platform.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/platform.h - */ - -#ifndef __ASSEMBLY__ - -#include -#include - -struct device; -struct i2c_board_info; -struct spi_board_info; -struct platform_device; -struct ep93xxfb_mach_info; -struct ep93xx_keypad_platform_data; -struct ep93xx_spi_info; - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); - -void ep93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size); - -void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); -void ep93xx_register_i2c(struct i2c_board_info *devices, int num); -void ep93xx_register_spi(struct ep93xx_spi_info *info, - struct spi_board_info *devices, int num); -void ep93xx_register_fb(struct ep93xxfb_mach_info *data); -void ep93xx_register_pwm(int pwm0, int pwm1); -void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); -void ep93xx_register_i2s(void); -void ep93xx_register_ac97(void); -void ep93xx_register_ide(void); -void ep93xx_register_adc(void); - -struct device *ep93xx_init_devices(void); -extern void ep93xx_timer_init(void); - -void ep93xx_restart(enum reboot_mode, const char *); - -#endif diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h deleted file mode 100644 index 3245ebbd5069..000000000000 --- a/arch/arm/mach-ep93xx/soc.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-ep93xx/soc.h - * - * Copyright (C) 2012 Open Kernel Labs - * Copyright (C) 2012 Ryan Mallon - */ - -#ifndef _EP93XX_SOC_H -#define _EP93XX_SOC_H - -#include "ep93xx-regs.h" -#include "irqs.h" - -/* - * EP93xx Physical Memory Map: - * - * The ASDO pin is sampled at system reset to select a synchronous or - * asynchronous boot configuration. When ASDO is "1" (i.e. pulled-up) - * the synchronous boot mode is selected. When ASDO is "0" (i.e - * pulled-down) the asynchronous boot mode is selected. - * - * In synchronous boot mode nSDCE3 is decoded starting at physical address - * 0x00000000 and nCS0 is decoded starting at 0xf0000000. For asynchronous - * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3 - * decoded at 0xf0000000. - * - * There is known errata for the EP93xx dealing with External Memory - * Configurations. Please refer to "AN273: EP93xx Silicon Rev E Design - * Guidelines" for more information. This document can be found at: - * - * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf - */ - -#define EP93XX_CS0_PHYS_BASE_ASYNC 0x00000000 /* ASDO Pin = 0 */ -#define EP93XX_SDCE3_PHYS_BASE_SYNC 0x00000000 /* ASDO Pin = 1 */ -#define EP93XX_CS1_PHYS_BASE 0x10000000 -#define EP93XX_CS2_PHYS_BASE 0x20000000 -#define EP93XX_CS3_PHYS_BASE 0x30000000 -#define EP93XX_PCMCIA_PHYS_BASE 0x40000000 -#define EP93XX_CS6_PHYS_BASE 0x60000000 -#define EP93XX_CS7_PHYS_BASE 0x70000000 -#define EP93XX_SDCE0_PHYS_BASE 0xc0000000 -#define EP93XX_SDCE1_PHYS_BASE 0xd0000000 -#define EP93XX_SDCE2_PHYS_BASE 0xe0000000 -#define EP93XX_SDCE3_PHYS_BASE_ASYNC 0xf0000000 /* ASDO Pin = 0 */ -#define EP93XX_CS0_PHYS_BASE_SYNC 0xf0000000 /* ASDO Pin = 1 */ - -/* AHB peripherals */ -#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000) - -#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000) -#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000) - -#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000) -#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000) - -#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000) -#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE EP93XX_AHB_IOMEM(0x00080000) - -#define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) - -#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) -#define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) - -#define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) - -#define EP93XX_VIC2_BASE EP93XX_AHB_IOMEM(0x000c0000) - -/* APB peripherals */ -#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000) - -#define EP93XX_I2S_PHYS_BASE EP93XX_APB_PHYS(0x00020000) -#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000) - -#define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) - -#define EP93XX_AAC_PHYS_BASE EP93XX_APB_PHYS(0x00080000) -#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000) - -#define EP93XX_SPI_PHYS_BASE EP93XX_APB_PHYS(0x000a0000) -#define EP93XX_SPI_BASE EP93XX_APB_IOMEM(0x000a0000) - -#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000) - -#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000) -#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000) - -#define EP93XX_ADC_PHYS_BASE EP93XX_APB_PHYS(0x00100000) -#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000) -#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000) - -#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000) -#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000) - -#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000) -#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000) - -#define EP93XX_WATCHDOG_PHYS_BASE EP93XX_APB_PHYS(0x00140000) -#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000) - -/* System controller */ -#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31) -#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29) -#define EP93XX_SYSCON_PWRCNT_USH_EN 28 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 27 -#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 26 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 25 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 24 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 23 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 22 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 21 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 20 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 19 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 18 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 17 -#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 16 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLKSET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLKSET1_NBYP1 (1<<23) -#define EP93XX_SYSCON_CLKSET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_CLKSET2_NBYP2 (1<<19) -#define EP93XX_SYSCON_CLKSET2_PLL2_EN (1<<18) -#define EP93XX_SYSCON_DEVCFG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVCFG_SWRST (1<<31) -#define EP93XX_SYSCON_DEVCFG_D1ONG (1<<30) -#define EP93XX_SYSCON_DEVCFG_D0ONG (1<<29) -#define EP93XX_SYSCON_DEVCFG_IONU2 (1<<28) -#define EP93XX_SYSCON_DEVCFG_GONK (1<<27) -#define EP93XX_SYSCON_DEVCFG_TONG (1<<26) -#define EP93XX_SYSCON_DEVCFG_MONG (1<<25) -#define EP93XX_SYSCON_DEVCFG_U3EN 24 -#define EP93XX_SYSCON_DEVCFG_CPENA (1<<23) -#define EP93XX_SYSCON_DEVCFG_A2ONG (1<<22) -#define EP93XX_SYSCON_DEVCFG_A1ONG (1<<21) -#define EP93XX_SYSCON_DEVCFG_U2EN 20 -#define EP93XX_SYSCON_DEVCFG_EXVC (1<<19) -#define EP93XX_SYSCON_DEVCFG_U1EN 18 -#define EP93XX_SYSCON_DEVCFG_TIN (1<<17) -#define EP93XX_SYSCON_DEVCFG_HC3IN (1<<15) -#define EP93XX_SYSCON_DEVCFG_HC3EN (1<<14) -#define EP93XX_SYSCON_DEVCFG_HC1IN (1<<13) -#define EP93XX_SYSCON_DEVCFG_HC1EN (1<<12) -#define EP93XX_SYSCON_DEVCFG_HONIDE (1<<11) -#define EP93XX_SYSCON_DEVCFG_GONIDE (1<<10) -#define EP93XX_SYSCON_DEVCFG_PONG (1<<9) -#define EP93XX_SYSCON_DEVCFG_EONIDE (1<<8) -#define EP93XX_SYSCON_DEVCFG_I2SONSSP (1<<7) -#define EP93XX_SYSCON_DEVCFG_I2SONAC97 (1<<6) -#define EP93XX_SYSCON_DEVCFG_RASONP3 (1<<4) -#define EP93XX_SYSCON_DEVCFG_RAS (1<<3) -#define EP93XX_SYSCON_DEVCFG_ADCPD (1<<2) -#define EP93XX_SYSCON_DEVCFG_KEYS (1<<1) -#define EP93XX_SYSCON_DEVCFG_SHENA (1<<0) -#define EP93XX_SYSCON_VIDCLKDIV EP93XX_SYSCON_REG(0x84) -#define EP93XX_SYSCON_CLKDIV_ENABLE 15 -#define EP93XX_SYSCON_CLKDIV_ESEL (1<<14) -#define EP93XX_SYSCON_CLKDIV_PSEL (1<<13) -#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT 8 -#define EP93XX_SYSCON_I2SCLKDIV EP93XX_SYSCON_REG(0x8c) -#define EP93XX_SYSCON_I2SCLKDIV_SENA 31 -#define EP93XX_SYSCON_I2SCLKDIV_ORIDE (1<<29) -#define EP93XX_SYSCON_I2SCLKDIV_SPOL (1<<19) -#define EP93XX_I2SCLKDIV_SDIV (1 << 16) -#define EP93XX_I2SCLKDIV_LRDIV32 (0 << 17) -#define EP93XX_I2SCLKDIV_LRDIV64 (1 << 17) -#define EP93XX_I2SCLKDIV_LRDIV128 (2 << 17) -#define EP93XX_I2SCLKDIV_LRDIV_MASK (3 << 17) -#define EP93XX_SYSCON_KEYTCHCLKDIV EP93XX_SYSCON_REG(0x90) -#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN 31 -#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV 16 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN 15 -#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0) -#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c) -#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000) -#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28) -#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8) -#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7) -#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6) -#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5) -#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4) -#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3) -#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1) -#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0) -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -/* EP93xx System Controller software locked register write */ -void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits); - -static inline void ep93xx_devcfg_set_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(bits, 0x00); -} - -static inline void ep93xx_devcfg_clear_bits(unsigned int bits) -{ - ep93xx_devcfg_set_clear(0x00, bits); -} - -#endif /* _EP93XX_SOC_H */ diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c deleted file mode 100644 index a9efa7bc2fa1..000000000000 --- a/arch/arm/mach-ep93xx/timer-ep93xx.c +++ /dev/null @@ -1,143 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "soc.h" -#include "platform.h" - -/************************************************************************* - * Timer handling for EP93xx - ************************************************************************* - * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and - * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate - * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, - * is free-running, and can't generate interrupts. - * - * The 508 kHz timers are ideal for use for the timer interrupt, as the - * most common values of HZ divide 508 kHz nicely. We pick the 32 bit - * timer (timer 3) to get as long sleep intervals as possible when using - * CONFIG_NO_HZ. - * - * The higher clock rate of timer 4 makes it a better choice than the - * other timers for use as clock source and for sched_clock(), providing - * a stable 40 bit time base. - ************************************************************************* - */ -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7) -#define EP93XX_TIMER123_CONTROL_MODE (1 << 6) -#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_TIMER123_RATE 508469 -#define EP93XX_TIMER4_RATE 983040 - -static u64 notrace ep93xx_read_sched_clock(void) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return ret; -} - -static u64 ep93xx_clocksource_read(struct clocksource *c) -{ - u64 ret; - - ret = readl(EP93XX_TIMER4_VALUE_LOW); - ret |= ((u64) (readl(EP93XX_TIMER4_VALUE_HIGH) & 0xff) << 32); - return (u64) ret; -} - -static int ep93xx_clkevt_set_next_event(unsigned long next, - struct clock_event_device *evt) -{ - /* Default mode: periodic, off, 508 kHz */ - u32 tmode = EP93XX_TIMER123_CONTROL_MODE | - EP93XX_TIMER123_CONTROL_CLKSEL; - - /* Clear timer */ - writel(tmode, EP93XX_TIMER3_CONTROL); - - /* Set next event */ - writel(next, EP93XX_TIMER3_LOAD); - writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, - EP93XX_TIMER3_CONTROL); - return 0; -} - - -static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) -{ - /* Disable timer */ - writel(0, EP93XX_TIMER3_CONTROL); - - return 0; -} - -static struct clock_event_device ep93xx_clockevent = { - .name = "timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_state_shutdown = ep93xx_clkevt_shutdown, - .set_state_oneshot = ep93xx_clkevt_shutdown, - .tick_resume = ep93xx_clkevt_shutdown, - .set_next_event = ep93xx_clkevt_set_next_event, - .rating = 300, -}; - -static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* Writing any value clears the timer interrupt */ - writel(1, EP93XX_TIMER3_CLEAR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -void __init ep93xx_timer_init(void) -{ - int irq = IRQ_EP93XX_TIMER3; - unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; - - /* Enable and register clocksource and sched_clock on timer 4 */ - writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, - EP93XX_TIMER4_VALUE_HIGH); - clocksource_mmio_init(NULL, "timer4", - EP93XX_TIMER4_RATE, 200, 40, - ep93xx_clocksource_read); - sched_clock_register(ep93xx_read_sched_clock, 40, - EP93XX_TIMER4_RATE); - - /* Set up clockevent on timer 3 */ - if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", - &ep93xx_clockevent)) - pr_err("Failed to request irq %d (ep93xx timer)\n", irq); - clockevents_config_and_register(&ep93xx_clockevent, - EP93XX_TIMER123_RATE, - 1, - 0xffffffffU); -} diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c deleted file mode 100644 index 0bbdf587c685..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ /dev/null @@ -1,422 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/ts72xx.c - * Technologic Systems TS72xx SBC support. - * - * Copyright (C) 2006 Lennert Buytenhek - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "gpio-ep93xx.h" -#include "hardware.h" - -#include -#include -#include - -#include "soc.h" -#include "ts72xx.h" - -/************************************************************************* - * IO map - *************************************************************************/ -static struct map_desc ts72xx_io_desc[] __initdata = { - { - .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), - .length = TS72XX_MODEL_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), - .length = TS72XX_OPTIONS_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), - .length = TS72XX_OPTIONS2_SIZE, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE, - .pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE), - .length = TS72XX_CPLDVER_SIZE, - .type = MT_DEVICE, - } -}; - -static void __init ts72xx_map_io(void) -{ - ep93xx_map_io(); - iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc)); -} - - -/************************************************************************* - * NAND flash - *************************************************************************/ -#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */ -#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */ - -static void ts72xx_nand_hwcontrol(struct nand_chip *chip, - int cmd, unsigned int ctrl) -{ - if (ctrl & NAND_CTRL_CHANGE) { - void __iomem *addr = chip->legacy.IO_ADDR_R; - unsigned char bits; - - addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE); - - bits = __raw_readb(addr) & ~0x07; - bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */ - bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */ - bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */ - - __raw_writeb(bits, addr); - } - - if (cmd != NAND_CMD_NONE) - __raw_writeb(cmd, chip->legacy.IO_ADDR_W); -} - -static int ts72xx_nand_device_ready(struct nand_chip *chip) -{ - void __iomem *addr = chip->legacy.IO_ADDR_R; - - addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE); - - return !!(__raw_readb(addr) & 0x20); -} - -#define TS72XX_BOOTROM_PART_SIZE (SZ_16K) -#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M) - -static struct mtd_partition ts72xx_nand_parts[] = { - { - .name = "TS-BOOTROM", - .offset = 0, - .size = TS72XX_BOOTROM_PART_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, { - .name = "Linux", - .offset = MTDPART_OFS_RETAIN, - .size = TS72XX_REDBOOT_PART_SIZE, - /* leave so much for last partition */ - }, { - .name = "RedBoot", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, -}; - -static struct platform_nand_data ts72xx_nand_data = { - .chip = { - .nr_chips = 1, - .chip_offset = 0, - .chip_delay = 15, - }, - .ctrl = { - .cmd_ctrl = ts72xx_nand_hwcontrol, - .dev_ready = ts72xx_nand_device_ready, - }, -}; - -static struct resource ts72xx_nand_resource[] = { - { - .start = 0, /* filled in later */ - .end = 0, /* filled in later */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts72xx_nand_flash = { - .name = "gen_nand", - .id = -1, - .dev.platform_data = &ts72xx_nand_data, - .resource = ts72xx_nand_resource, - .num_resources = ARRAY_SIZE(ts72xx_nand_resource), -}; - -static void __init ts72xx_register_flash(struct mtd_partition *parts, int n, - resource_size_t start) -{ - /* - * TS7200 has NOR flash all other TS72xx board have NAND flash. - */ - if (board_is_ts7200()) { - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); - } else { - ts72xx_nand_resource[0].start = start; - ts72xx_nand_resource[0].end = start + SZ_16M - 1; - - ts72xx_nand_data.chip.partitions = parts; - ts72xx_nand_data.chip.nr_partitions = n; - - platform_device_register(&ts72xx_nand_flash); - } -} - -/************************************************************************* - * RTC M48T86 - *************************************************************************/ -#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000) -#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000) - -static struct resource ts72xx_rtc_resources[] = { - DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_rtc_device = { - .name = "rtc-m48t86", - .id = -1, - .resource = ts72xx_rtc_resources, - .num_resources = ARRAY_SIZE(ts72xx_rtc_resources), -}; - -/************************************************************************* - * Watchdog (in CPLD) - *************************************************************************/ -#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000) -#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000) - -static struct resource ts72xx_wdt_resources[] = { - DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01), - DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01), -}; - -static struct platform_device ts72xx_wdt_device = { - .name = "ts72xx-wdt", - .id = -1, - .resource = ts72xx_wdt_resources, - .num_resources = ARRAY_SIZE(ts72xx_wdt_resources), -}; - -/************************************************************************* - * ETH - *************************************************************************/ -static struct ep93xx_eth_data __initdata ts72xx_eth_data = { - .phy_id = 1, -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -#define BK3_EN_SDCARD_PHYS_BASE 0x12400000 -#define BK3_EN_SDCARD_PWR 0x0 -#define BK3_DIS_SDCARD_PWR 0x0C -static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd) -{ - void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K); - - if (!pwr_sd) { - pr_err("Failed to enable SD card power!"); - return; - } - - pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__, - !!vdd ? "ON" : "OFF", vdd); - - if (!!vdd) - __raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd); - else - __raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd); - - iounmap(pwr_sd); -} - -static struct mmc_spi_platform_data bk3_spi_mmc_data = { - .detect_delay = 500, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_NONREMOVABLE, - .setpower = bk3_mmc_spi_setpower, -}; - -/************************************************************************* - * SPI Bus - SD card access - *************************************************************************/ -static struct spi_board_info bk3_spi_board_info[] __initdata = { - { - .modalias = "mmc_spi", - .platform_data = &bk3_spi_mmc_data, - .max_speed_hz = 7.4E6, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, -}; - -/* - * This is a stub -> the FGPIO[3] pin is not connected on the schematic - * The all work is performed automatically by !SPI_FRAME (SFRM1) and - * goes through CPLD - */ -static struct gpiod_lookup_table bk3_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP("gpio-ep93xx.5", 3, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info bk3_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * TS72XX support code - *************************************************************************/ -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - -/* Relative to EP93XX_CS1_PHYS_BASE */ -#define TS73XX_FPGA_LOADER_BASE 0x03c00000 - -static struct resource ts73xx_fpga_resources[] = { - { - .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE, - .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ts73xx_fpga_device = { - .name = "ts73xx-fpga-mgr", - .id = -1, - .resource = ts73xx_fpga_resources, - .num_resources = ARRAY_SIZE(ts73xx_fpga_resources), -}; - -#endif - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info ts72xx_spi_devices[] __initdata = { - { - .modalias = "tmp122", - .max_speed_hz = 2 * 1000 * 1000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - /* DIO_17 */ - GPIO_LOOKUP("gpio-ep93xx.5", 2, "cs", GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info ts72xx_spi_info __initdata = { - /* Intentionally left blank */ -}; - -static void __init ts72xx_init_machine(void) -{ - ep93xx_init_devices(); - ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts), - is_ts9420_installed() ? - EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE); - platform_device_register(&ts72xx_rtc_device); - platform_device_register(&ts72xx_wdt_device); - - ep93xx_register_eth(&ts72xx_eth_data, 1); -#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX) - if (board_is_ts7300()) - platform_device_register(&ts73xx_fpga_device); -#endif - gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table); - ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices, - ARRAY_SIZE(ts72xx_spi_devices)); -} - -MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC") - /* Maintainer: Lennert Buytenhek */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = ts72xx_init_machine, - .restart = ep93xx_restart, -MACHINE_END - -/************************************************************************* - * EP93xx I2S audio peripheral handling - *************************************************************************/ -static struct resource ep93xx_i2s_resource[] = { - DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100), - DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"), -}; - -static struct platform_device ep93xx_i2s_device = { - .name = "ep93xx-spilink-i2s", - .id = -1, - .num_resources = ARRAY_SIZE(ep93xx_i2s_resource), - .resource = ep93xx_i2s_resource, -}; - -/************************************************************************* - * BK3 support code - *************************************************************************/ -static struct mtd_partition bk3_nand_parts[] = { - { - .name = "System", - .offset = 0x00000000, - .size = 0x01e00000, - }, { - .name = "Data", - .offset = 0x01e00000, - .size = 0x05f20000 - }, { - .name = "RedBoot", - .offset = 0x07d20000, - .size = 0x002e0000, - .mask_flags = MTD_WRITEABLE, /* force RO */ - }, -}; - -static void __init bk3_init_machine(void) -{ - ep93xx_init_devices(); - - ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts), - EP93XX_CS6_PHYS_BASE); - - ep93xx_register_eth(&ts72xx_eth_data, 1); - - gpiod_add_lookup_table(&bk3_spi_cs_gpio_table); - ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info, - ARRAY_SIZE(bk3_spi_board_info)); - - /* Configure ep93xx's I2S to use AC97 pins */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97); - platform_device_register(&ep93xx_i2s_device); -} - -MACHINE_START(BK3, "Liebherr controller BK3.1") - /* Maintainer: Lukasz Majewski */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS, - .map_io = ts72xx_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = bk3_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ep93xx/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h deleted file mode 100644 index 00b4941d29c9..000000000000 --- a/arch/arm/mach-ep93xx/ts72xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ep93xx/include/mach/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register (bits 0-2) - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 23400000 4K CPLD version register - */ - -#ifndef __TS72XX_H_ -#define __TS72XX_H_ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 -#define TS72XX_MODEL_TS7300 0x03 -#define TS72XX_MODEL_TS7400 0x04 -#define TS72XX_MODEL_MASK 0x07 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - -#define TS72XX_CPLDVER_PHYS_BASE 0x23400000 -#define TS72XX_CPLDVER_VIRT_BASE IOMEM(0xfebfc000) -#define TS72XX_CPLDVER_SIZE 0x00001000 - -#ifndef __ASSEMBLY__ - -static inline int ts72xx_model(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; -} - -static inline int board_is_ts7200(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7260; -} - -static inline int board_is_ts7300(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7300; -} - -static inline int board_is_ts7400(void) -{ - return ts72xx_model() == TS72XX_MODEL_TS7400; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif -#endif /* __TS72XX_H_ */ diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c deleted file mode 100644 index b3087b8eed3f..000000000000 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ /dev/null @@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ep93xx/vision_ep9307.c - * Vision Engraving Systems EP9307 SoM support. - * - * Copyright (C) 2008-2011 Vision Engraving Systems - * H Hartley Sweeten - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "hardware.h" -#include -#include -#include "gpio-ep93xx.h" - -#include -#include -#include - -#include "soc.h" - -/************************************************************************* - * Static I/O mappings for the FPGA - *************************************************************************/ -#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE -#define VISION_VIRT_BASE 0xfebff000 - -static struct map_desc vision_io_desc[] __initdata = { - { - .virtual = VISION_VIRT_BASE, - .pfn = __phys_to_pfn(VISION_PHYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static void __init vision_map_io(void) -{ - ep93xx_map_io(); - - iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc)); -} - -/************************************************************************* - * Ethernet - *************************************************************************/ -static struct ep93xx_eth_data vision_eth_data __initdata = { - .phy_id = 1, -}; - -/************************************************************************* - * Framebuffer - *************************************************************************/ -#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1 - -static int vision_lcd_setup(struct platform_device *pdev) -{ - int err; - - err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH, - dev_name(&pdev->dev)); - if (err) - return err; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS | - EP93XX_SYSCON_DEVCFG_RASONP3 | - EP93XX_SYSCON_DEVCFG_EXVC); - - return 0; -} - -static void vision_lcd_teardown(struct platform_device *pdev) -{ - gpio_free(VISION_LCD_ENABLE); -} - -static void vision_lcd_blank(int blank_mode, struct fb_info *info) -{ - if (blank_mode) - gpio_set_value(VISION_LCD_ENABLE, 0); - else - gpio_set_value(VISION_LCD_ENABLE, 1); -} - -static struct ep93xxfb_mach_info ep93xxfb_info __initdata = { - .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, - .setup = vision_lcd_setup, - .teardown = vision_lcd_teardown, - .blank = vision_lcd_blank, -}; - - -/************************************************************************* - * GPIO Expanders - *************************************************************************/ -#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1) -#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16) -#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16) -#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16) - -static struct pca953x_platform_data pca953x_74_gpio_data = { - .gpio_base = PCA9539_74_GPIO_BASE, - .irq_base = EP93XX_BOARD_IRQ(0), -}; - -static struct pca953x_platform_data pca953x_75_gpio_data = { - .gpio_base = PCA9539_75_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_76_gpio_data = { - .gpio_base = PCA9539_76_GPIO_BASE, - .irq_base = -1, -}; - -static struct pca953x_platform_data pca953x_77_gpio_data = { - .gpio_base = PCA9539_77_GPIO_BASE, - .irq_base = -1, -}; - -/************************************************************************* - * I2C Bus - *************************************************************************/ - -static struct i2c_board_info vision_i2c_info[] __initdata = { - { - I2C_BOARD_INFO("isl1208", 0x6f), - .irq = IRQ_EP93XX_EXT1, - }, { - I2C_BOARD_INFO("pca9539", 0x74), - .platform_data = &pca953x_74_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x75), - .platform_data = &pca953x_75_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x76), - .platform_data = &pca953x_76_gpio_data, - }, { - I2C_BOARD_INFO("pca9539", 0x77), - .platform_data = &pca953x_77_gpio_data, - }, -}; - -/************************************************************************* - * SPI CS4271 Audio Codec - *************************************************************************/ -static struct cs4271_platform_data vision_cs4271_data = { - /* Intentionally left blank */ -}; - -/************************************************************************* - * SPI Flash - *************************************************************************/ -static struct mtd_partition vision_spi_flash_partitions[] = { - { - .name = "SPI bootstrap", - .offset = 0, - .size = SZ_4K, - }, { - .name = "Bootstrap config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_4K, - }, { - .name = "System config", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct flash_platform_data vision_spi_flash_data = { - .name = "SPI Flash", - .parts = vision_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions), -}; - -/************************************************************************* - * SPI SD/MMC host - *************************************************************************/ -static struct mmc_spi_platform_data vision_spi_mmc_data = { - .detect_delay = 100, - .powerup_msecs = 100, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, -}; - -static struct gpiod_lookup_table vision_spi_mmc_gpio_table = { - .dev_id = "mmc_spi.2", /* "mmc_spi @ CS2 */ - .table = { - /* Card detect */ - GPIO_LOOKUP_IDX("gpio-ep93xx.1", 7, NULL, 0, GPIO_ACTIVE_LOW), - /* Write protect */ - GPIO_LOOKUP_IDX("gpio-ep93xx.5", 0, NULL, 1, GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/************************************************************************* - * SPI Bus - *************************************************************************/ -static struct spi_board_info vision_spi_board_info[] __initdata = { - { - .modalias = "cs4271", - .platform_data = &vision_cs4271_data, - .max_speed_hz = 6000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - }, { - .modalias = "sst25l", - .platform_data = &vision_spi_flash_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, { - .modalias = "mmc_spi", - .platform_data = &vision_spi_mmc_data, - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 2, - .mode = SPI_MODE_3, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = { - .dev_id = "spi0.0", /* cs4271 @ CS0 */ - .table = { - /* RESET */ - GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct gpiod_lookup_table vision_spi_cs_gpio_table = { - .dev_id = "spi0", - .table = { - GPIO_LOOKUP_IDX("gpio-ep93xx.0", 6, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-ep93xx.0", 7, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-ep93xx.6", 2, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, -}; - -static struct ep93xx_spi_info vision_spi_master __initdata = { - .use_dma = 1, -}; - -/************************************************************************* - * I2S Audio - *************************************************************************/ -static struct platform_device vision_audio_device = { - .name = "edb93xx-audio", - .id = -1, -}; - -static void __init vision_register_i2s(void) -{ - ep93xx_register_i2s(); - platform_device_register(&vision_audio_device); -} - -/************************************************************************* - * Machine Initialization - *************************************************************************/ -static void __init vision_init_machine(void) -{ - ep93xx_init_devices(); - ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M); - ep93xx_register_eth(&vision_eth_data, 1); - ep93xx_register_fb(&ep93xxfb_info); - ep93xx_register_pwm(1, 0); - - /* - * Request the gpio expander's interrupt gpio line now to prevent - * the kernel from doing a WARN in gpiolib:gpio_ensure_requested(). - */ - if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN, - "pca9539:74")) - pr_warn("cannot request interrupt gpio for pca9539:74\n"); - - vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)); - - ep93xx_register_i2c(vision_i2c_info, - ARRAY_SIZE(vision_i2c_info)); - gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table); - gpiod_add_lookup_table(&vision_spi_mmc_gpio_table); - gpiod_add_lookup_table(&vision_spi_cs_gpio_table); - ep93xx_register_spi(&vision_spi_master, vision_spi_board_info, - ARRAY_SIZE(vision_spi_board_info)); - vision_register_i2s(); -} - -MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307") - /* Maintainer: H Hartley Sweeten */ - .atag_offset = 0x100, - .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS, - .map_io = vision_map_io, - .init_irq = ep93xx_init_irq, - .init_time = ep93xx_timer_init, - .init_machine = vision_init_machine, - .restart = ep93xx_restart, -MACHINE_END diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h deleted file mode 100644 index b439f2a896e0..000000000000 --- a/include/linux/platform_data/spi-ep93xx.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_MACH_EP93XX_SPI_H -#define __ASM_MACH_EP93XX_SPI_H - -struct spi_device; - -/** - * struct ep93xx_spi_info - EP93xx specific SPI descriptor - * @use_dma: use DMA for the transfers - */ -struct ep93xx_spi_info { - bool use_dma; -}; - -#endif /* __ASM_MACH_EP93XX_SPI_H */ -- cgit v1.2.3 From 43528a72526152f17a918973b3b8b6f383b90f98 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:11:01 +0300 Subject: ARM: ep93xx: soc: drop defines Remove unnecessary defines, as we dropped board files. Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Acked-by: Vinod Koul Signed-off-by: Arnd Bergmann --- include/linux/platform_data/eth-ep93xx.h | 10 --------- include/linux/platform_data/keypad-ep93xx.h | 32 ----------------------------- include/linux/soc/cirrus/ep93xx.h | 13 ------------ 3 files changed, 55 deletions(-) delete mode 100644 include/linux/platform_data/eth-ep93xx.h delete mode 100644 include/linux/platform_data/keypad-ep93xx.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/eth-ep93xx.h b/include/linux/platform_data/eth-ep93xx.h deleted file mode 100644 index 8eef637a804d..000000000000 --- a/include/linux/platform_data/eth-ep93xx.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_PLATFORM_DATA_ETH_EP93XX -#define _LINUX_PLATFORM_DATA_ETH_EP93XX - -struct ep93xx_eth_data { - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - -#endif diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h deleted file mode 100644 index 3054fced8509..000000000000 --- a/include/linux/platform_data/keypad-ep93xx.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __KEYPAD_EP93XX_H -#define __KEYPAD_EP93XX_H - -struct matrix_keymap_data; - -/* flags for the ep93xx_keypad driver */ -#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ -#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ -#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ -#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ -#define EP93XX_KEYPAD_AUTOREPEAT (1<<4) /* enable key autorepeat */ - -/** - * struct ep93xx_keypad_platform_data - platform specific device structure - * @keymap_data: pointer to &matrix_keymap_data - * @debounce: debounce start count; terminal count is 0xff - * @prescale: row/column counter pre-scaler load value - * @flags: see above - */ -struct ep93xx_keypad_platform_data { - struct matrix_keymap_data *keymap_data; - unsigned int debounce; - unsigned int prescale; - unsigned int flags; - unsigned int clk_rate; -}; - -#define EP93XX_MATRIX_ROWS (8) -#define EP93XX_MATRIX_COLS (8) - -#endif /* __KEYPAD_EP93XX_H */ diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h index 142c33a2d7db..3e6cf2b25a97 100644 --- a/include/linux/soc/cirrus/ep93xx.h +++ b/include/linux/soc/cirrus/ep93xx.h @@ -2,7 +2,6 @@ #ifndef _SOC_EP93XX_H #define _SOC_EP93XX_H -struct platform_device; struct regmap; struct spinlock_t; @@ -36,16 +35,4 @@ struct ep93xx_regmap_adev { #define to_ep93xx_regmap_adev(_adev) \ container_of((_adev), struct ep93xx_regmap_adev, adev) -#ifdef CONFIG_ARCH_EP93XX -int ep93xx_i2s_acquire(void); -void ep93xx_i2s_release(void); -unsigned int ep93xx_chip_revision(void); - -#else -static inline int ep93xx_i2s_acquire(void) { return 0; } -static inline void ep93xx_i2s_release(void) {} -static inline unsigned int ep93xx_chip_revision(void) { return 0; } - -#endif - #endif -- cgit v1.2.3 From a015b1828653b591de0aa5303c0dbc4235935f94 Mon Sep 17 00:00:00 2001 From: Nikita Shubin Date: Mon, 9 Sep 2024 11:11:03 +0300 Subject: dmaengine: cirrus: remove platform code Remove DMA platform header, from now on we use device tree for DMA clients. Acked-by: Vinod Koul Signed-off-by: Nikita Shubin Tested-by: Alexander Sverdlin Signed-off-by: Arnd Bergmann --- drivers/dma/ep93xx_dma.c | 48 ++++++++++++++- include/linux/platform_data/dma-ep93xx.h | 100 ------------------------------- 2 files changed, 46 insertions(+), 102 deletions(-) delete mode 100644 include/linux/platform_data/dma-ep93xx.h (limited to 'include/linux/platform_data') diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c index 17c8e2badee2..43c4241af7f5 100644 --- a/drivers/dma/ep93xx_dma.c +++ b/drivers/dma/ep93xx_dma.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -25,8 +26,6 @@ #include #include -#include - #include "dmaengine.h" /* M2P registers */ @@ -106,6 +105,26 @@ #define DMA_MAX_CHAN_BYTES 0xffff #define DMA_MAX_CHAN_DESCRIPTORS 32 +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + enum ep93xx_dma_type { M2P_DMA, M2M_DMA, @@ -242,6 +261,31 @@ static struct ep93xx_dma_chan *to_ep93xx_dma_chan(struct dma_chan *chan) return container_of(chan, struct ep93xx_dma_chan, chan); } +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p")) + return true; + + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/* + * ep93xx_dma_chan_direction - returns direction the channel can be used + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_transfer_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_TRANS_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +} + /** * ep93xx_dma_set_active - set new active descriptor chain * @edmac: channel diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h deleted file mode 100644 index 9ec5cdd5a1eb..000000000000 --- a/include/linux/platform_data/dma-ep93xx.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include -#include -#include -#include -#include -#include - -/* - * M2P channels. - * - * Note that these values are also directly used for setting the PPALLOC - * register. - */ -#define EP93XX_DMA_I2S1 0 -#define EP93XX_DMA_I2S2 1 -#define EP93XX_DMA_AAC1 2 -#define EP93XX_DMA_AAC2 3 -#define EP93XX_DMA_AAC3 4 -#define EP93XX_DMA_I2S3 5 -#define EP93XX_DMA_UART1 6 -#define EP93XX_DMA_UART2 7 -#define EP93XX_DMA_UART3 8 -#define EP93XX_DMA_IRDA 9 -/* M2M channels */ -#define EP93XX_DMA_SSP 10 -#define EP93XX_DMA_IDE 11 - -/** - * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine - * @port: peripheral which is requesting the channel - * @direction: TX/RX channel - * @name: optional name for the channel, this is displayed in /proc/interrupts - * - * This information is passed as private channel parameter in a filter - * function. Note that this is only needed for slave/cyclic channels. For - * memcpy channels %NULL data should be passed. - */ -struct ep93xx_dma_data { - int port; - enum dma_transfer_direction direction; - const char *name; -}; - -/** - * struct ep93xx_dma_chan_data - platform specific data for a DMA channel - * @name: name of the channel, used for getting the right clock for the channel - * @base: mapped registers - * @irq: interrupt number used by this channel - */ -struct ep93xx_dma_chan_data { - const char *name; - void __iomem *base; - int irq; -}; - -/** - * struct ep93xx_dma_platform_data - platform data for the dmaengine driver - * @channels: array of channels which are passed to the driver - * @num_channels: number of channels in the array - * - * This structure is passed to the DMA engine driver via platform data. For - * M2P channels, contract is that even channels are for TX and odd for RX. - * There is no requirement for the M2M channels. - */ -struct ep93xx_dma_platform_data { - struct ep93xx_dma_chan_data *channels; - size_t num_channels; -}; - -static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) -{ - if (device_is_compatible(chan->device->dev, "cirrus,ep9301-dma-m2p")) - return true; - - return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); -} - -/** - * ep93xx_dma_chan_direction - returns direction the channel can be used - * @chan: channel - * - * This function can be used in filter functions to find out whether the - * channel supports given DMA direction. Only M2P channels have such - * limitation, for M2M channels the direction is configurable. - */ -static inline enum dma_transfer_direction -ep93xx_dma_chan_direction(struct dma_chan *chan) -{ - if (!ep93xx_dma_chan_is_m2p(chan)) - return DMA_TRANS_NONE; - - /* even channels are for TX, odd for RX */ - return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; -} - -#endif /* __ASM_ARCH_DMA_H */ -- cgit v1.2.3