| Age | Commit message (Collapse) | Author |
|---|
|
* kvm-arm64/feat_idst:
: .
: Add support for FEAT_IDST, allowing ID registers that are not implemented
: to be reported as a normal trap rather than as an UNDEF exception.
: .
KVM: arm64: selftests: Add a test for FEAT_IDST
KVM: arm64: pkvm: Report optional ID register traps with a 0x18 syndrome
KVM: arm64: pkvm: Add a generic synchronous exception injection primitive
KVM: arm64: Force trap of GMID_EL1 when the guest doesn't have MTE
KVM: arm64: Handle CSSIDR2_EL1 and SMIDR_EL1 in a generic way
KVM: arm64: Handle FEAT_IDST for sysregs without specific handlers
KVM: arm64: Add a generic synchronous exception injection primitive
KVM: arm64: Add trap routing for GMID_EL1
arm64: Repaint ID_AA64MMFR2_EL1.IDS description
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc7).
Conflicts:
drivers/net/ethernet/huawei/hinic3/hinic3_irq.c
b35a6fd37a00 ("hinic3: Add adaptive IRQ coalescing with DIM")
fb2bb2a1ebf7 ("hinic3: Fix netif_queue_set_napi queue_index input parameter error")
https://lore.kernel.org/fc0a7fdf08789a52653e8ad05281a0a849e79206.1768915707.git.zhuyikai1@h-partners.com
drivers/net/wireless/ath/ath12k/mac.c
drivers/net/wireless/ath/ath12k/wifi7/hw.c
31707572108d ("wifi: ath12k: Fix wrong P2P device link id issue")
c26f294fef2a ("wifi: ath12k: Move ieee80211_ops callback to the arch specific module")
https://lore.kernel.org/20260114123751.6a208818@canb.auug.org.au
Adjacent changes:
drivers/net/wireless/ath/ath12k/mac.c
8b8d6ee53dfd ("wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel")
914c890d3b90 ("wifi: ath12k: Add framework for hardware specific ieee80211_ops registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable flexible thread-to-queue mapping in batch I/O mode to support
arbitrary combinations of threads and queues, improving resource
utilization and scalability.
Key improvements:
- Support N:M thread-to-queue mapping (previously limited to 1:1)
- Dynamic buffer allocation based on actual queue assignment per thread
- Thread-safe queue preparation with spinlock protection
- Intelligent buffer index calculation for multi-queue scenarios
- Enhanced validation for thread/queue combination constraints
Implementation details:
- Add q_thread_map matrix to track queue-to-thread assignments
- Dynamic allocation of commit and fetch buffers per thread
- Round-robin queue assignment algorithm for load balancing
- Per-queue spinlock to prevent race conditions during prep
- Updated buffer index calculation using queue position within thread
This enables efficient configurations like:
- Any other N:M combinations for optimal resource matching
Testing:
- Added test_batch_02.sh: 4 threads vs 1 queue
- Added test_batch_03.sh: 1 thread vs 4 queues
- Validates correctness across different mapping scenarios
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add --batch/-b for enabling F_BATCH_IO.
Add batch_01 for covering its basic function.
Add stress_08 and stress_09 for covering stress test.
Add recovery test for F_BATCH_IO in generic_04 and generic_05.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
More tests need to be covered in existing generic tests, and default
45sec isn't enough, and timeout is often triggered, increase timeout
by adding setting file.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for UBLK_U_IO_FETCH_IO_CMDS to enable efficient batch
fetching of I/O commands using multishot io_uring operations.
Key improvements:
- Implement multishot UBLK_U_IO_FETCH_IO_CMDS for continuous command fetching
- Add fetch buffer management with page-aligned, mlocked buffers
- Process fetched I/O command tags from kernel-provided buffers
- Integrate fetch operations with existing batch I/O infrastructure
- Significantly reduce uring_cmd issuing overhead through batching
The implementation uses two fetch buffers per thread with automatic
requeuing to maintain continuous I/O command flow. Each fetch operation
retrieves multiple command tags in a single syscall, dramatically
improving performance compared to individual command fetching.
Technical details:
- Fetch buffers are page-aligned and mlocked for optimal performance
- Uses IORING_URING_CMD_MULTISHOT for continuous operation
- Automatic buffer management and requeuing on completion
- Enhanced CQE handling for fetch command completions
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement UBLK_U_IO_COMMIT_IO_CMDS to enable efficient batched
completion of I/O operations in the batch I/O framework.
This completes the batch I/O infrastructure by adding the commit
phase that notifies the kernel about completed I/O operations:
Key features:
- Batch multiple I/O completions into single UBLK_U_IO_COMMIT_IO_CMDS
- Dynamic commit buffer allocation and management per thread
- Automatic commit buffer preparation before processing events
- Commit buffer submission after processing completed I/Os
- Integration with existing completion workflows
Implementation details:
- ublk_batch_prep_commit() allocates and initializes commit buffers
- ublk_batch_complete_io() adds completed I/Os to current batch
- ublk_batch_commit_io_cmds() submits batched completions to kernel
- Modified ublk_process_io() to handle batch commit lifecycle
- Enhanced ublk_complete_io() to route to batch or legacy completion
The commit buffer stores completion information (tag, result, buffer
details) for multiple I/Os, then submits them all at once, significantly
reducing syscall overhead compared to individual I/O completions.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement support for UBLK_U_IO_PREP_IO_CMDS in the batch I/O framework:
- Add batch command initialization and setup functions
- Implement prep command queueing with proper buffer management
- Add command completion handling for prep and commit commands
- Integrate batch I/O setup into thread initialization
- Update CQE handling to support batch commands
The implementation uses the previously established buffer management
infrastructure to queue UBLK_U_IO_PREP_IO_CMDS commands. Commands are
prepared in the first thread context and use commit buffers for
efficient command batching.
Key changes:
- ublk_batch_queue_prep_io_cmds() prepares I/O command batches
- ublk_batch_compl_cmd() handles batch command completions
- Modified thread setup to use batch operations when enabled
- Enhanced buffer index calculation for batch mode
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the foundational infrastructure for UBLK_F_BATCH_IO buffer
management including:
- Allocator utility functions for small sized per-thread allocation
- Batch buffer allocation and deallocation functions
- Buffer index management for commit buffers
- Thread state management for batch I/O mode
- Buffer size calculation based on device features
This prepares the groundwork for handling batch I/O commands by
establishing the buffer management layer needed for UBLK_U_IO_PREP_IO_CMDS
and UBLK_U_IO_COMMIT_IO_CMDS operations.
The allocator uses CPU sets for efficient per-thread buffer tracking,
and commit buffers are pre-allocated with 2 buffers per thread to handle
overlapping command operations.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since UBLK_F_PER_IO_DAEMON is added, io buffer index may depend on current
thread because the common way is to use per-pthread io_ring_ctx for issuing
ublk uring_cmd.
Add one helper for returning io buffer index, so we can hide the buffer
index implementation details for target code.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace assert() with ublk_assert() since it is often triggered in daemon,
and we may get nothing shown in terminal.
Add ublk_assert(), so we can log something to syslog when assert() is
triggered.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The build_user_data() function packs multiple fields into a __u64
value using bit shifts. Without explicit __u64 casts before shifting,
the shift operations are performed on 32-bit unsigned integers before
being promoted to 64-bit, causing data loss.
Specifically, when tgt_data >= 256, the expression (tgt_data << 24)
shifts on a 32-bit value, truncating the upper 8 bits before promotion
to __u64. Since tgt_data can be up to 16 bits (assertion allows up to
65535), values >= 256 would have their high byte lost.
Add explicit __u64 casts to both op and tgt_data before shifting to
ensure the shift operations happen in 64-bit space, preserving all
bits of the input values.
user_data_to_tgt_data() is only used by stripe.c, in which the max
supported member disks are 4, so won't trigger this issue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
RFC 4884 extended certain ICMP messages with a length attribute that
encodes the length of the "original datagram" field. This is needed so
that new information could be appended to these messages without
applications thinking that it is part of the "original datagram" field.
In version 5.9, the kernel was extended with two new socket options
(SOL_IP/IP_RECVERR_4884 and SOL_IPV6/IPV6_RECVERR_RFC4884) that allow
user space to retrieve this length which is basically the offset to the
ICMP Extension Structure at the end of the ICMP message. This is
required by user space applications that need to parse the information
contained in the ICMP Extension Structure. For example, the RFC 5837
extension for tracepath.
Add a selftest that verifies correct handling of the RFC 4884 length
field for both IPv4 and IPv6, with and without extension structures,
and validates that malformed extensions are correctly reported as invalid.
For each address family, the test creates:
- a raw socket used to send locally crafted ICMP error packets to the
loopback address, and
- a datagram socket used to receive the encapsulated original datagram
and associated error metadata from the kernel error queue.
ICMP packets are constructed entirely in user space rather than relying
on kernel-generated errors. This allows the test to exercise invalid
scenarios (such as corrupted checksums and incorrect length fields) and
verify that the SO_EE_RFC4884_FLAG_INVALID flag is set as expected.
Output Example:
$ ./icmp_rfc4884
Starting 18 tests from 18 test cases.
RUN rfc4884.ipv4_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_ext_small_payload.rfc4884
ok 1 rfc4884.ipv4_ext_small_payload.rfc4884
RUN rfc4884.ipv4_ext.rfc4884 ...
OK rfc4884.ipv4_ext.rfc4884
ok 2 rfc4884.ipv4_ext.rfc4884
RUN rfc4884.ipv4_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_ext_large_payload.rfc4884
ok 3 rfc4884.ipv4_ext_large_payload.rfc4884
RUN rfc4884.ipv4_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_small_payload.rfc4884
ok 4 rfc4884.ipv4_no_ext_small_payload.rfc4884
RUN rfc4884.ipv4_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_min_payload.rfc4884
ok 5 rfc4884.ipv4_no_ext_min_payload.rfc4884
RUN rfc4884.ipv4_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv4_no_ext_large_payload.rfc4884
ok 6 rfc4884.ipv4_no_ext_large_payload.rfc4884
RUN rfc4884.ipv4_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_checksum.rfc4884
ok 7 rfc4884.ipv4_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_small.rfc4884
ok 8 rfc4884.ipv4_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv4_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv4_invalid_ext_length_large.rfc4884
ok 9 rfc4884.ipv4_invalid_ext_length_large.rfc4884
RUN rfc4884.ipv6_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_ext_small_payload.rfc4884
ok 10 rfc4884.ipv6_ext_small_payload.rfc4884
RUN rfc4884.ipv6_ext.rfc4884 ...
OK rfc4884.ipv6_ext.rfc4884
ok 11 rfc4884.ipv6_ext.rfc4884
RUN rfc4884.ipv6_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_ext_large_payload.rfc4884
ok 12 rfc4884.ipv6_ext_large_payload.rfc4884
RUN rfc4884.ipv6_no_ext_small_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_small_payload.rfc4884
ok 13 rfc4884.ipv6_no_ext_small_payload.rfc4884
RUN rfc4884.ipv6_no_ext_min_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_min_payload.rfc4884
ok 14 rfc4884.ipv6_no_ext_min_payload.rfc4884
RUN rfc4884.ipv6_no_ext_large_payload.rfc4884 ...
OK rfc4884.ipv6_no_ext_large_payload.rfc4884
ok 15 rfc4884.ipv6_no_ext_large_payload.rfc4884
RUN rfc4884.ipv6_invalid_ext_checksum.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_checksum.rfc4884
ok 16 rfc4884.ipv6_invalid_ext_checksum.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_small.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_small.rfc4884
ok 17 rfc4884.ipv6_invalid_ext_length_small.rfc4884
RUN rfc4884.ipv6_invalid_ext_length_large.rfc4884 ...
OK rfc4884.ipv6_invalid_ext_length_large.rfc4884
ok 18 rfc4884.ipv6_invalid_ext_length_large.rfc4884
PASSED: 18 / 18 tests passed.
Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260121114644.2863640-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the kallsyms relative base was introduced, per-CPU variable
references on x86_64 SMP were implemented as offsets into the respective
per-CPU region, rather than offsets relative to the location of the
variable's template in the kernel image, which is how other
architectures implement it.
This required kallsyms to reason about the difference between the two,
and the sign of the value in the kallsyms_offsets[] array was used to
distinguish them. This meant that negative offsets were not permitted
for ordinary variables, and so it was crucial that the relative base was
chosen such that all offsets were positive numbers.
This is no longer needed: instead, the offsets can simply be encoded as
values in the range -/+ 2 GiB, which is precisely what PC32 relocations
provide on most architectures. So it is possible to simplify the logic,
and just use _text as the anchor directly, and let the linker calculate
the final value based on the location of the entry itself.
Some architectures (nios2, extensa) do not support place-relative
relocations at all, but these are all 32-bit and non-relocatable, and so
there is no need for place-relative relocations in the first place, and
the actual symbol values can just be stored directly.
This makes all entries in the kallsyms_offsets[] array visible as
place-relative references in the ELF metadata, which will be important
when implementing ELF-based fg-kaslr.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260116093359.2442297-6-ardb+git@google.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Restricted CXL Host (RCH) protocol error handling uses a procedure distinct
from the CXL Virtual Hierarchy (VH) handling. This is because of the
differences in the RCH and VH topologies. Improve the maintainability and
add ability to enable/disable RCH handling.
Move and combine the RCH handling code into a single block conditionally
compiled with the CONFIG_CXL_RCH_RAS kernel config.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260114182055.46029-9-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
from core/pci.c
Create new config CONFIG_CXL_RAS and put all CXL RAS items behind the
config. The config will depend on CPER and PCIE AER to build. Move the
related VH RAS code from core/pci.c to core/ras.c.
Restricted CXL host (RCH) RAS functions will be moved in a future patch.
Cc: Robert Richter <rrichter@amd.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260114182055.46029-8-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull one more cpuidle utility update for 6.20 from Shuah Khan:
"Improve the installation procedure by making this systemd step optional
enabling users to disable installation of systemd's unit file."
* tag 'linux-cpupower-6.20-update-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: make systemd unit installation optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
|
|
Document 'perf sched stats' purpose, usage examples and guide on how to
interpret the report data in the perf-sched man page.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add basic test for 'perf sched stats {record|report|diff}' subcommand.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://lore.kernel.org/r/20260119175833.340369-10-swapnil.sapkal@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The live mode works similar to simple `perf stat` command, by profiling
the target and printing results on the terminal as soon as the target
finishes.
Example usage:
# perf sched stats -- true
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT PCT_CHANGE
----------------------------------------------------------------------------------------------------
yld_count : 0
array_exp : 0
sched_count : 0
sched_goidle : 0 ( 0.00% )
ttwu_count : 0
ttwu_local : 0 ( 0.00% )
rq_cpu_time : 27875
run_delay : 0 ( 0.00% )
pcount : 0
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT AVG_JIFFIES
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0 $ 0.00 $
busy_lb_balanced : 0 $ 0.00 $
busy_lb_failed : 0 $ 0.00 $
busy_lb_imbalance_load : 0
busy_lb_imbalance_util : 0
busy_lb_imbalance_task : 0
busy_lb_imbalance_misfit : 0
busy_lb_gained : 0
busy_lb_hot_gained : 0
busy_lb_nobusyq : 0 $ 0.00 $
busy_lb_nobusyg : 0 $ 0.00 $
*busy_lb_success_count : 0
*busy_lb_avg_pulled : 0.00
... and so on. Output will show similar data for all the cpus in the
system.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
[ Avoid potentially using 'sv' uninitialized by calling free_cpu_domain_info() only when build_cpu_domain_map() is called ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
`perf sched stats record` captures two sets of samples. For workload
profile, first set right before workload starts and second set after
workload finishes. For the systemwide profile, first set at the
beginning of profile and second set on receiving SIGINT signal.
Add `perf sched stats report` subcommand that will read both the set
of samples, get the diff and render a final report. Final report prints
scheduler stat at cpu granularity as well as sched domain granularity.
Example usage:
# ./perf sched stats record -- true
[ perf sched stats: Wrote samples to perf.data ]
# perf sched stats report
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT PCT_CHANGE
----------------------------------------------------------------------------------------------------
yld_count : 0
array_exp : 0
sched_count : 0
sched_goidle : 0 ( 0.00% )
ttwu_count : 0
ttwu_local : 0 ( 0.00% )
rq_cpu_time : 33525
run_delay : 436 ( 1.30% )
pcount : 0
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT AVG_JIFFIES
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0 $ 0.00 $
busy_lb_balanced : 0 $ 0.00 $
busy_lb_failed : 0 $ 0.00 $
busy_lb_imbalance_load : 0
busy_lb_imbalance_util : 0
busy_lb_imbalance_task : 0
busy_lb_imbalance_misfit : 0
busy_lb_gained : 0
busy_lb_hot_gained : 0
busy_lb_nobusyq : 0 $ 0.00 $
busy_lb_nobusyg : 0 $ 0.00 $
*busy_lb_success_count : 0
*busy_lb_avg_pulled : 0.00
... and so on. Output shows similar data for all the cpus in the
system.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The /proc/schedstat file output is standardized with version number.
Add support to record and raw dump v17 version layout.
Version 17 of schedstats removed 'lb_imbalance' field as it has no
significance anymore and instead added more relevant fields namely
'lb_imbalance_load', 'lb_imbalance_util', 'lb_imbalance_task' and
'lb_imbalance_misfit'.
The domain field prints the name of the corresponding sched domain from
this version onwards.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The /proc/schedstat file output is standardized with version number.
Add support to record and raw dump v16 version layout.
Version 16 of schedstats changed the order of definitions within 'enum
cpu_idle_type', which changed the order of [CPU_MAX_IDLE_TYPES] columns
in show_schedstat().
In particular the position of CPU_IDLE and __CPU_NOT_IDLE changed
places.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Define new, perf tool only, sample types and their layouts. Add logic
to parse /proc/schedstat, convert it to perf sample format and save
samples to perf.data file with `perf sched stats record` command.
Also add logic to read perf.data file, interpret schedstat samples and
print rawdump of samples with `perf script -D`.
Note that, /proc/schedstat file output is standardized with version
number. The patch supports v15 but older or newer version can be added
easily.
Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
[ PRIu64 needs uint64_t, not 'unsigned long' to work on both 32-bit and 64-bit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a regression test for the TX credit bounds fix. The test verifies
that a sender with a small local buffer size cannot queue excessive
data even when the peer advertises a large receive buffer.
The client:
- Sets a small buffer size (64 KiB)
- Connects to server (which advertises 2 MiB buffer)
- Sends in non-blocking mode until EAGAIN
- Verifies total queued data is bounded
This guards against the original vulnerability where a remote peer
could cause unbounded kernel memory allocation by advertising a large
buffer and reading slowly.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use sock_buf_size to check the bytes sent + small fixes]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-5-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add tests for FEAT_LS64. Issue related instructions if feature
presents, no SIGILL should be received. When such instructions
operate on Device memory or non-cacheable memory, we may received
a SIGBUS during the test (w/o FEAT_LS64WB). Just ignore it since
we only tested whether the instruction itself can be issued as
expected on platforms declaring the support of such features.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The my_syscall*() macros are internal implementation details of nolibc.
Nolibc also provides the regular syscall(2), which is also a macro
and directly expands to the correct my_syscall().
Use syscall() instead.
As a side-effect this fixes some return value checks, as my_syscall()
returns the raw value as set by the kernel and does not set errno.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A script that processes trace-cmd data and generates a histogram of
rseq slice_ext durations for the recorded workload.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121143208.340549136@infradead.org
|
|
Provide an initial test case to evaluate the functionality. This needs to be
extended to cover the ABI violations and expose the race condition between
observing granted and arriving in rseq_slice_yield().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155709.320325431@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fix from Namhyung Kim:
"A minor fix for error handling in the event parser"
* tag 'perf-tools-fixes-for-v6.19-2026-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf parse-events: Fix evsel allocation failure
|
|
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new netconsole selftest to validate that netconsole is able
to resume a deactivated target when the low level interface comes back.
The test setups the network using netdevsim, creates a netconsole target
and then remove/add netdevsim in order to bring the same interfaces
back. Afterwards, the test validates that the target works as expected.
Targets are created via cmdline parameters to the module to ensure that
we are able to resume targets that were bound by mac and interface name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-7-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The '/proc/schedstat' file gives info about load balancing statistics
within a given domain.
It also contains the cpu_mask giving information about the sibling cpus
and domain names after schedstat version 17.
Storing this information in perf header will help tools like `perf sched
stats` for better analysis.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add list_is_first() to check whether @list is the first entry in list @head
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When wq__attach() fails, serial_test_wq() returns early without calling
wq__destroy(), leaking the skeleton resources allocated by
wq__open_and_load(). This causes ASAN leak reports in selftests runs.
Fix this by jumping to a common clean_up label that calls wq__destroy()
on all exit paths after successful open_and_load.
Note that the early return after wq__open_and_load() failure is correct
and doesn't need fixing, since that function returns NULL on failure
(after internally cleaning up any partial allocations).
Fixes: 8290dba51910 ("selftests/bpf: wq: add bpf_wq_start() checks")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260121094114.1801-3-qikeyu2017@gmail.com
|
|
Commit 436326bc525d ("objtool: fix build failure due to missing libopcodes
check") tests for libopcodes using an empty main(), which passes even when
static libraries lack their dependencies. This causes undefined reference
errors (xmalloc, bfd_get_bits, etc.) when linking against static libopcodes
without its required libbfd and libiberty.
Fix by testing with an actual libopcodes symbol and trying increasingly
complete library combinations until one succeeds.
Fixes: 436326bc525d ("objtool: fix build failure due to missing libopcodes check")
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260121162532.1596238-1-sashal@kernel.org
|
|
Fix the typo "untill" → "until" in a comment in pidfd_info_test.c.
This typo is already listed in scripts/spelling.txt by commit
66b47b4a9dad ("checkpatch: look for common misspellings").
Link: https://lore.kernel.org/r/20260121094147.4187337-1-chenziyu@uniontech.com
Suggested-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Ziyu Chen <chenziyu@uniontech.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add testsuites for kfunc bpf_strncasecmp.
Signed-off-by: Yuzuki Ishiyama <ishiyama@hpc.is.uec.ac.jp>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/r/20260121033328.1850010-3-ishiyama@hpc.is.uec.ac.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test bpf_get_func_arg() and bpf_get_func_arg_cnt() for tp_btf. The code
is most copied from test1 and test2.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260121044348.113201-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add support for IORING_SETUP_NO_SQARRAY in miniliburing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a ring init variant taking struct io_uring_params, which mimicks
liburing API.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output
when running kublk in foreground mode. Without this, _evtfd is
zero-initialized to 0 (stdin), and ublk_send_dev_event() writes
binary data to stdin which appears as garbage on the terminal.
Also fix debug message format string.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix error handling in ublk_start_daemon() when start_dev fails:
1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before
cleanup. Without this, the device deletion may hang waiting for
I/O completion that will never happen.
2. Add fail_start label so that pthread_join() is called on the
error path. This ensures proper thread cleanup when startup fails.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Include cmd_inflight in ublk_thread_is_done() check. Without this,
the thread may exit before all FETCH commands are completed, which
may cause device deletion to hang.
Fixes: 6aecda00b7d1 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Something now detected on fedora 44, where strchr() returns const if it
is passed a const pointer:
util/print-events.c: In function 'print_sdt_events':
util/print-events.c:89:29: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
89 | char *bid = strchr(sdt_name->s, '@');
| ^~~~~~
Fix it by using strchrnul() + strncmp() instead of temporarily scrubbing
it with '\0'.
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Link: https://lore.kernel.org/r/20260121112536.27fd5d11@pumpkin
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In this case its a temp list that is created just for listing events and
will be deleted at the end, so just cast it to get rid of the compiler
warning.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the testcase for the jited inline of bpf_get_current_task().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120070555.233486-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
