| Age | Commit message (Collapse) | Author |
|
Add test cases to ensure the verifier correctly rejects bpf_throw from
subprogs when RCU, preempt, or IRQ locks are held:
* reject_subprog_rcu_lock_throw: subprog acquires bpf_rcu_read_lock and
then calls bpf_throw
* reject_subprog_throw_preempt_lock: always-throwing subprog called while
caller holds bpf_preempt_disable
* reject_subprog_throw_irq_lock: always-throwing subprog called while
caller holds bpf_local_irq_save
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260320000809.643798-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098
Assisted-by: Claude:claude-opus-4-6
Fixes: f18b03fabaa9 ("bpf: Implement BPF exceptions")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260320000809.643798-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Check error code of xbc_init_node() in override value path in
xbc_parse_kv()
- Fix fd leak in load_xbc_file() on fstat failure
* tag 'bootconfig-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: fix fd leak in load_xbc_file() on fstat failure
lib/bootconfig: check xbc_init_node() return in override path
|
|
Add tsync_interrupt test to exercise the signal interruption path in
landlock_restrict_sibling_threads(). When a signal interrupts
wait_for_completion_interruptible() while the calling thread waits for
sibling threads to finish credential preparation, the kernel:
1. Sets ERESTARTNOINTR to request a transparent syscall restart.
2. Calls cancel_tsync_works() to opportunistically dequeue task works
that have not started running yet.
3. Breaks out of the preparation loop, then unblocks remaining
task works via complete_all() and waits for them to finish.
4. Returns the error, causing abort_creds() in the syscall handler.
Specifically, cancel_tsync_works() in its entirety, the ERESTARTNOINTR
error branch in landlock_restrict_sibling_threads(), and the
abort_creds() error branch in the landlock_restrict_self() syscall
handler are timing-dependent and not exercised by the existing tsync
tests, making code coverage measurements non-deterministic.
The test spawns a signaler thread that rapidly sends SIGUSR1 to the
calling thread while it performs landlock_restrict_self() with
LANDLOCK_RESTRICT_SELF_TSYNC. Since ERESTARTNOINTR causes a
transparent restart, userspace always sees the syscall succeed.
This is a best-effort coverage test: the interruption path is exercised
when the signal lands during the preparation wait, which depends on
thread scheduling. The test creates enough idle sibling threads (200)
to ensure multiple serialized waves of credential preparation even on
machines with many cores (e.g., 64), widening the window for the
signaler. Deterministic coverage would require wrapping the wait call
with ALLOW_ERROR_INJECTION() and using CONFIG_FAIL_FUNCTION.
Test coverage for security/landlock was 90.2% of 2105 lines according to
LLVM 21, and it is now 91.1% of 2105 lines with this new test.
Cc: Günther Noack <gnoack@google.com>
Cc: Justin Suess <utilityemal77@gmail.com>
Cc: Tingmao Wang <m@maowtm.org>
Cc: Yihan Ding <dingyihan@uniontech.com>
Link: https://lore.kernel.org/r/20260310190416.1913908-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
If fstat() fails after open() succeeds, the function returns without
closing the file descriptor. Also preserve errno across close(), since
close() may overwrite it before the error is returned.
Link: https://lore.kernel.org/all/20260318155847.78065-3-objecting@objecting.org/
Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Commands that add counters, such as 'turbostat --show C1,C1+'
display merged columns without a delimiter.
This is caused by the bad syntax: '(*printed++ ? delim : "")', shared by
print_name()/print_hex_value()/print_decimal_value()/print_float_value()
Use '((*printed)++ ? delim : "")' to correctly increment the value at *printed.
[lenb: fix code and commit message typo, re-word]
Fixes: 56dbb878507b ("tools/power turbostat: Refactor added column header printing")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
To pick up some extra files that need to be sync'ed with the kernel
sources to try and reduce the number of PRs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Problem: individual swidle counter names (C1, C1+, C1-, etc.) cannot be
selected via --show/--hide due to two bugs in probe_cpuidle_counts():
1. The function returns immediately when BIC_cpuidle is not enabled,
without checking deferred_add_index.
2. The deferred name check runs against name_buf before the trailing
newline is stripped, so is_deferred_add("C1\n") never matches "C1".
Fix:
1. Relax the early return to pass through when deferred names are
queued.
2. Strip the trailing newline from name_buf before performing deferred
name checks.
3. Check each suffixed variant (C1+, C1, C1-) individually so that
e.g. "--show C1+" enables only the requested metric.
In addition, introduce a helper function to avoid repeating the
condition (readability cleanup).
Fixes: ec4acd3166d8 ("tools/power turbostat: disable "cpuidle" invocation counters, by default")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
In the perf thread, core, and package counter loops, an incorrect
'mp->format' variable is used instead of 'pp->format'.
[lenb: edit commit message]
Fixes: 696d15cbd8c2 ("tools/power turbostat: Refactor floating point printout code")
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Fix the PMT thread code to use print_float_value(),
to be consistent with the PMT core and package code.
[lenb: commit message]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat always used the same logic to read the microcode patch level,
which is correct for Intel but not for AMD/Hygon.
While Intel stores the patch level in the upper 32 bits of MSR, AMD
stores it in the lower 32 bits, which causes turbostat to report the
microcode version as 0x0 on AMD/Hygon.
Fix by shifting right by 32 for non-AMD/Hygon, preserving the existing
behavior for Intel and unknown vendors.
Fixes: 3e4048466c39 ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Serhii Pievniev <spevnev16@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Linux core_id's are a per-package namespace, not a per-node namespace.
Rename topo.cores_per_node to topo.cores_per_pkg to reflect this.
Eliminate topo.nodes_per_pkg from the sizing for core data structures,
since it has no role except to unnecessarily bloat the allocation.
Validated on multiple Intel platforms (ICX/SPR/SRF/EMR/GNR/CWF) with
various CPU online/offline configurations and SMT enabled/disabled
scenarios.
No functional changes.
[lenb: commit message]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
I changed my mind about displaying swidle statistics,
which are "added counters". Recently I reverted the
column headers to 8-columns, but kept print_decimal_value()
padding out to 16-columns for all 64-bit counters.
Simplify by keeping print_decimial_value() at %lld -- which
will often fit into 8-columns, and live with the fact
that it can overflow and shift the other columns,
which continue to tab-delimited.
This is a better compromise than inserting a bunch
of space characters that most users don't like.
Fixes: 1a23ba6a1ba2 ("tools/power turbostat: Print wide names only for RAW 64-bit columns")
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- various fixes dealing with (intentionally) broken devices in HID
core, logitech-hidpp and multitouch drivers (Lee Jones)
- fix for OOB in wacom driver (Benoît Sevens)
- fix for potentialy HID-bpf-induced buffer overflow in () (Benjamin
Tissoires)
- various other small fixes and device ID / quirk additions
* tag 'hid-for-linus-2026031701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Check to ensure report responses match the request
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
HID: bpf: prevent buffer overflow in hid_hw_request
selftests/hid: fix compilation when bpf_wq and hid_device are not exported
HID: core: Mitigate potential OOB by removing bogus memset()
HID: intel-thc-hid: Set HID_PHYS with PCI BDF
HID: appletb-kbd: add .resume method in PM
HID: logitech-hidpp: Enable MX Master 4 over bluetooth
HID: input: Add HID_BATTERY_QUIRK_DYNAMIC for Elan touchscreens
HID: input: Drop Asus UX550* touchscreen ignore battery quirks
HID: asus: add xg mobile 2022 external hardware support
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
|
|
Add an extra "../" to the relative paths so that the uAPI headers
provided by tools can be found correctly.
Fixes: a724a8fce5e25b45 ("perf kvm stat: Fix build error")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The "Read backward ring buffer" test crashes on big-endian (e.g. s390x)
due to a NULL dereference when the backward mmap path isn't enabled.
Reproducer:
# ./perf test -F 'Read backward ring buffer'
Segmentation fault (core dumped)
# uname -m
s390x
#
Root cause:
get_config_terms() stores into evsel_config_term::val.val (u64) while later
code reads boolean fields such as evsel_config_term::val.overwrite.
On big-endian the 1-byte boolean is left-aligned, so writing
evsel_config_term::val.val = 1 is read back as
evsel_config_term::val.overwrite = 0,
leaving backward mmap disabled and a NULL map being used.
Store values in the union member that matches the term type, e.g.:
/* for OVERWRITE */
new_term->val.overwrite = 1; /* not new_term->val.val = 1 */
to fix this. Improve add_config_term() and add two more parameters for
string and value. Function add_config_term() now creates a complete node
element of type evsel_config_term and handles all evsel_config_term::val
union members.
Impact:
Enables backward mmap on big-endian and prevents the crash.
No change on little-endian.
Output after:
# ./perf test -Fv 44
--- start ---
Using CPUID IBM,9175,705,ME1,3.8,002f
mmap size 1052672B
mmap size 8192B
---- end ----
44: Read backward ring buffer : Ok
#
Fixes: 159ca97cd97ce8cc ("perf parse-events: Refactor get_config_terms() to remove macros")
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use metricgroup__for_each_metric() rather than
pmu_metrics_table__for_each_metric() that combines the
default metric table with, a potentially empty, CPUID table.
Fixes: cee275edcdb1acfd ("perf metricgroup: Don't early exit if no CPUID table exists")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The mount_setattr_idmapped fixture mounts a 2 MB tmpfs at /mnt and then
creates a 2 GB sparse ext4 image at /mnt/C/ext4.img. While ftruncate()
succeeds (sparse file), mkfs.ext4 needs to write actual metadata blocks
(inode tables, journal, bitmaps) which easily exceeds the 2 MB tmpfs
limit, causing ENOSPC and failing the fixture setup for all
mount_setattr_idmapped tests.
This was introduced by commit d37d4720c3e7 ("selftests/mount_settattr:
ensure that ext4 filesystem can be created") which increased the image
size from 2 MB to 2 GB but didn't adjust the tmpfs size.
Bump the tmpfs size to 256 MB which is sufficient for the ext4 metadata.
Fixes: d37d4720c3e7 ("selftests/mount_settattr: ensure that ext4 filesystem can be created")
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
With Clang, there can be a conditional forward jump between the load of
the jump table address and the indirect branch.
Fixes the following warning:
vmlinux.o: warning: objtool: ___bpf_prog_run+0x1c5: sibling call from callable instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/a426d669-58bb-4be1-9eaa-6f3d83109e2d@app.fastmail.com
Link: https://patch.msgid.link/7d8600caed08901b6679767488acd639f6df9688.1773071992.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The elf_create_file() function fails with EINVAL when the build directory
path is long enough to truncate the "XXXXXX" suffix in the 256-byte
tmp_name buffer.
Simplify the code to remove the unnecessary dirname()/basename() split
and concatenation. Instead, allocate the exact number of bytes needed for
the path.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260310203751.1479229-3-joe.lawrence@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Commit 356e4b2f5b80 ("objtool: Fix data alignment in elf_add_data()")
corrected the alignment of data within a section (honoring the section's
sh_addralign). Apply the same alignment when klp-diff mode clones a
symbol, adjusting the new symbol's offset for the output section's
sh_addralign.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://patch.msgid.link/20260310203751.1479229-2-joe.lawrence@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
This test tries to setup routes which have address + offset
combinations which cross a page.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
This can happen in situations when CONFIG_HID_SUPPORT is set to no, or
some complex situations where struct bpf_wq is not exported.
So do the usual dance of hiding them before including vmlinux.h, and
then redefining them and make use of CO-RE to have the correct offsets.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603111558.KLCIxsZB-lkp@intel.com/
Fixes: fe8d561db3e8 ("selftests/hid: add wq test for hid_bpf_input_report()")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some definitions in the arm64 kernel's cputype.h are kernel specific and
cause perf build failures when the header is synced into tools.
Stop checking arm64's cputype.h. In the future, the header in tools
will be updated manually when teaching tools about new CPUs.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- fix off-by-one in xbc_verify_tree() unclosed brace error. This fixes
a wrong error place in unclosed brace error message
- check bounds before writing in __xbc_open_brace(). This fixes to
check the array index before setting array, so that the bootconfig
can support 16th-depth nested brace correctly
- fix snprintf truncation check in xbc_node_compose_key_after(). This
fixes to handle the return value of snprintf() correctly in case of
the return value == size
- Add bootconfig tests about braces Add test cases for checking error
position about unclosed brace and ensuring supporting 16th depth
nested braces correctly
* tag 'bootconfig-fixes-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Add bootconfig tests about braces
lib/bootconfig: fix snprintf truncation check in xbc_node_compose_key_after()
lib/bootconfig: check bounds before writing in __xbc_open_brace()
lib/bootconfig: fix off-by-one in xbc_verify_tree() unclosed brace error
|
|
Pull kvm fixes from Paolo Bonzini:
"Quite a large pull request, partly due to skipping last week and
therefore having material from ~all submaintainers in this one. About
a fourth of it is a new selftest, and a couple more changes are large
in number of files touched (fixing a -Wflex-array-member-not-at-end
compiler warning) or lines changed (reformatting of a table in the API
documentation, thanks rST).
But who am I kidding---it's a lot of commits and there are a lot of
bugs being fixed here, some of them on the nastier side like the
RISC-V ones.
ARM:
- Correctly handle deactivation of interrupts that were activated
from LRs. Since EOIcount only denotes deactivation of interrupts
that are not present in an LR, start EOIcount deactivation walk
*after* the last irq that made it into an LR
- Avoid calling into the stubs to probe for ICH_VTR_EL2.TDS when pKVM
is already enabled -- not only thhis isn't possible (pKVM will
reject the call), but it is also useless: this can only happen for
a CPU that has already booted once, and the capability will not
change
- Fix a couple of low-severity bugs in our S2 fault handling path,
affecting the recently introduced LS64 handling and the even more
esoteric handling of hwpoison in a nested context
- Address yet another syzkaller finding in the vgic initialisation,
where we would end-up destroying an uninitialised vgic with nasty
consequences
- Address an annoying case of pKVM failing to boot when some of the
memblock regions that the host is faulting in are not page-aligned
- Inject some sanity in the NV stage-2 walker by checking the limits
against the advertised PA size, and correctly report the resulting
faults
PPC:
- Fix a PPC e500 build error due to a long-standing wart that was
exposed by the recent conversion to kmalloc_obj(); rip out all the
ugliness that led to the wart
RISC-V:
- Prevent speculative out-of-bounds access using array_index_nospec()
in APLIC interrupt handling, ONE_REG regiser access, AIA CSR
access, float register access, and PMU counter access
- Fix potential use-after-free issues in kvm_riscv_gstage_get_leaf(),
kvm_riscv_aia_aplic_has_attr(), and kvm_riscv_aia_imsic_has_attr()
- Fix potential null pointer dereference in
kvm_riscv_vcpu_aia_rmw_topei()
- Fix off-by-one array access in SBI PMU
- Skip THP support check during dirty logging
- Fix error code returned for Smstateen and Ssaia ONE_REG interface
- Check host Ssaia extension when creating AIA irqchip
x86:
- Fix cases where CPUID mitigation features were incorrectly marked
as available whenever the kernel used scattered feature words for
them
- Validate _all_ GVAs, rather than just the first GVA, when
processing a range of GVAs for Hyper-V's TLB flush hypercalls
- Fix a brown paper bug in add_atomic_switch_msr()
- Use hlist_for_each_entry_srcu() when traversing mask_notifier_list,
to fix a lockdep warning; KVM doesn't hold RCU, just irq_srcu
- Ensure AVIC VMCB fields are initialized if the VM has an in-kernel
local APIC (and AVIC is enabled at the module level)
- Update CR8 write interception when AVIC is (de)activated, to fix a
bug where the guest can run in perpetuity with the CR8 intercept
enabled
- Add a quirk to skip the consistency check on FREEZE_IN_SMM, i.e. to
allow L1 hypervisors to set FREEZE_IN_SMM. This reverts (by
default) an unintentional tightening of userspace ABI in 6.17, and
provides some amount of backwards compatibility with hypervisors
who want to freeze PMCs on VM-Entry
- Validate the VMCS/VMCB on return to a nested guest from SMM,
because either userspace or the guest could stash invalid values in
memory and trigger the processor's consistency checks
Generic:
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from
being unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite
being rather unintuitive
Selftests:
- Increase the maximum number of NUMA nodes in the guest_memfd
selftest to 64 (from 8)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: selftests: Verify SEV+ guests can read and write EFER, CR0, CR4, and CR8
Documentation: kvm: fix formatting of the quirks table
KVM: x86: clarify leave_smm() return value
selftests: kvm: add a test that VMX validates controls on RSM
selftests: kvm: extract common functionality out of smm_test.c
KVM: SVM: check validity of VMCB controls when returning from SMM
KVM: VMX: check validity of VMCS controls when returning from SMM
KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated
KVM: SVM: Initialize AVIC VMCB fields if AVIC is enabled with in-kernel APIC
KVM: x86: Introduce KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM
KVM: x86: Fix SRCU list traversal in kvm_fire_mask_notifiers()
KVM: VMX: Fix a wrong MSR update in add_atomic_switch_msr()
KVM: x86: hyper-v: Validate all GVAs during PV TLB flush
KVM: x86: synthesize CPUID bits only if CPU capability is set
KVM: PPC: e500: Rip out "struct tlbe_ref"
KVM: PPC: e500: Fix build error due to using kmalloc_obj() with wrong type
KVM: selftests: Increase 'maxnode' for guest_memfd tests
KVM: arm64: pkvm: Don't reprobe for ICH_VTR_EL2.TDS on CPU hotplug
KVM: arm64: vgic: Pick EOIcount deactivations from AP-list tail
KVM: arm64: Remove the redundant ISB in __kvm_at_s1e2()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KUAP warning in VMX usercopy path
- Fix lockdep warning during PCI enumeration
- Fix to move CMA reservations to arch_mm_preinit
- Fix to check current->mm is alive before getting user callchain
Thanks to Aboorva Devarajan, Christophe Leroy (CS GROUP), Dan Horák,
Nicolin Chen, Nilay Shroff, Qiao Zhao, Ritesh Harjani (IBM), Saket Kumar
Bhaskar, Sayali Patil, Shrikanth Hegde, Venkat Rao Bagalkote, and Viktor
Malik.
* tag 'powerpc-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: fix lockdep warning during PCI enumeration
powerpc/selftests/copyloops: extend selftest to exercise __copy_tofrom_user_power7_vmx
powerpc: fix KUAP warning in VMX usercopy path
powerpc, perf: Check that current->mm is alive before getting user callchain
powerpc/mem: Move CMA reservations to arch_mm_preinit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
- Fix cross-build bug by using HOSTCFLAGS for HAVE_XXHASH test
- Fix klp bug by fixing detection of corrupt static branch/call entries
- Handle unsupported pr_debug() usage more gracefully
- Fix hypothetical klp bug by avoiding NULL pointer dereference when
printing code symbol name
- Fix data alignment bug in elf_add_data() causing mangled strings
- Fix confusing ERROR_INSN() error message
- Handle unexpected Clang RSP musical chairs causing false positive
warnings
- Fix another objtool stack overflow in validate_branch()
* tag 'objtool-urgent-2026-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix another stack overflow in validate_branch()
objtool: Handle Clang RSP musical chairs
objtool: Fix ERROR_INSN() error message
objtool: Fix data alignment in elf_add_data()
objtool: Use HOSTCFLAGS for HAVE_XXHASH test
objtool/klp: Avoid NULL pointer dereference when printing code symbol name
objtool/klp: Disable unsupported pr_debug() usage
objtool/klp: Fix detection of corrupt static branch/call entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes
- Fix rust cross compilation
- hashmap__new() error pointer return handling fixes
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
|
|
Add more bootconfig tests for checking the error message of
non closing brace and max number of nested braces.
Link: https://lore.kernel.org/all/177337553551.416919.11217619471547711262.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- Make the idle loop skip the cpuidle governor .reflect() callback
after it has skipped the .select() one (Rafael Wysocki)
- Fix swapped power/energy unit labels in cpupower (Kaushlendra Kumar)
- Add support for setting EPP via systemd service and intel_pstate
turbo boost support to cpupower (Jan Kiszka, Zhang Rui)
* tag 'pm-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
sched: idle: Make skipping governor callbacks more consistent
cpupower: Add intel_pstate turbo boost support for Intel platforms
cpupower: Add support for setting EPP via systemd service
cpupower: fix swapped power/energy unit labels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and netfilter.
Current release - regressions:
- eth: mana: Null service_wq on setup error to prevent double destroy
Previous releases - regressions:
- nexthop: fix percpu use-after-free in remove_nh_grp_entry
- sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
- bpf: fix nd_tbl NULL dereference when IPv6 is disabled
- neighbour: restore protocol != 0 check in pneigh update
- tipc: fix divide-by-zero in tipc_sk_filter_connect()
- eth:
- mlx5:
- fix crash when moving to switchdev mode
- fix DMA FIFO desync on error CQE SQ recovery
- iavf: fix PTP use-after-free during reset
- bonding: fix type confusion in bond_setup_by_slave()
- lan78xx: fix WARN in __netif_napi_del_locked on disconnect
Previous releases - always broken:
- core: add xmit recursion limit to tunnel xmit functions
- net-shapers: don't free reply skb after genlmsg_reply()
- netfilter:
- fix stack out-of-bounds read in pipapo_drop()
- fix OOB read in nfnl_cthelper_dump_table()
- mctp:
- fix device leak on probe failure
- i2c: fix skb memory leak in receive path
- can: keep the max bitrate error at 5%
- eth:
- bonding: fix nd_tbl NULL dereference when IPv6 is disabled
- bnxt_en: fix RSS table size check when changing ethtool channels
- amd-xgbe: prevent CRC errors during RX adaptation with AN disabled
- octeontx2-af: devlink: fix NIX RAS reporter recovery condition"
* tag 'net-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: prevent NULL deref in ip[6]tunnel_xmit()
octeontx2-af: devlink: fix NIX RAS reporter to use RAS interrupt status
octeontx2-af: devlink: fix NIX RAS reporter recovery condition
net: ethernet: ti: am65-cpsw-nuss: Fix rx_filter value for PTP support
net/mana: Null service_wq on setup error to prevent double destroy
selftests: rtnetlink: add neighbour update test
neighbour: restore protocol != 0 check in pneigh update
net: dsa: realtek: Fix LED group port bit for non-zero LED group
tipc: fix divide-by-zero in tipc_sk_filter_connect()
net: dsa: microchip: Fix error path in PTP IRQ setup
bpf: bpf_out_neigh_v6: Fix nd_tbl NULL dereference when IPv6 is disabled
bpf: bpf_out_neigh_v4: Fix nd_tbl NULL dereference when IPv6 is disabled
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
ipv6: move the disable_ipv6_mod knob to core code
net: bcmgenet: fix broken EEE by converting to phylib-managed state
net-shapers: don't free reply skb after genlmsg_reply()
net: dsa: mxl862xx: don't set user_mii_bus
net: ethernet: arc: emac: quiesce interrupts before requesting IRQ
page_pool: store detach_time as ktime_t to avoid false-negatives
net: macb: Shuffle the tx ring before enabling tx
...
|
|
Add "do no harm" testing of EFER, CR0, CR4, and CR8 for SEV+ guests to
verify that the guest can read and write the registers, without hitting
e.g. a #VC on SEV-ES guests due to KVM incorrectly trying to intercept a
register.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260310211841.2552361-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
__copy_tofrom_user_power7_vmx
The new PowerPC VMX fast path (__copy_tofrom_user_power7_vmx) is not
exercised by existing copyloops selftests. This patch updates
the selftest to exercise the VMX variant, ensuring the VMX copy path
is validated.
Changes include:
- COPY_LOOP=test___copy_tofrom_user_power7_vmx with -D VMX_TEST is used
in existing selftest build targets.
- Inclusion of ../utils.c to provide get_auxv_entry() for hardware
feature detection.
- At runtime, the test skips execution if Altivec is not available.
- Copy sizes above VMX_COPY_THRESHOLD are used to ensure the VMX
path is taken.
This enables validation of the VMX fast path without affecting systems
that do not support Altivec.
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260304122201.153049-2-sayalip@linux.ibm.com
|
|
Check that protocol and flags are updated correctly for
neighbour and pneigh entries.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/d28f72b5b4ff4c9ecbbbde06146a938dcc4c264a.1772894876.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
perf_event__synthesize_modules() allocates a single union perf_event and
reuses it across every kernel module callback.
After the first module is processed, perf_record_mmap2__read_build_id()
sets PERF_RECORD_MISC_MMAP_BUILD_ID in header.misc and writes that
module's build ID into the event.
On subsequent iterations the callback overwrites start, len, pid, and
filename for the next module but never clears the stale build ID fields
or the MMAP_BUILD_ID flag.
When perf_record_mmap2__read_build_id() runs for the second module it
sees the flag, reads the stale build ID into a dso_id, and
__dso__improve_id() permanently poisons the DSO with the wrong build ID.
Every module after the first therefore receives the first module's build
ID in its MMAP2 record.
On a system with the sunrpc and nfsd modules loaded, this causes perf
script and perf report to show [unknown] for all module symbols.
The latent bug has existed since commit d9f2ecbc5e47fca7 ("perf dso:
Move build_id to dso_id") introduced the PERF_RECORD_MISC_MMAP_BUILD_ID
check in perf_record_mmap2__read_build_id().
Commit 53b00ff358dc75b1 ("perf record: Make --buildid-mmap the default")
then exposed it to all users by making the MMAP2-with-build-ID path the
default. Both commits were merged in the same series.
Clear the MMAP_BUILD_ID flag and zero the build_id union before each
call to perf_record_mmap2__read_build_id() so that every module starts
with a clean slate.
Fixes: d9f2ecbc5e47fca7 ("perf dso: Move build_id to dso_id")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test checking that invalid eVMCS contents are validated after an
RSM instruction is emulated.
The failure mode is simply that the RSM succeeds, because KVM virtualizes
NMIs anyway while running L2; the two pin-based execution controls used
by the test are entirely handled by KVM and not by the processor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Increase 'maxnode' when using 'get_mempolicy' syscall in guest_memfd
mmap and NUMA policy tests to fix a failure on one Intel GNR platform.
On a CXL-capable platform, the memory affinity of CXL memory regions may
not be covered by the SRAT. Since each CXL memory region is enumerated
via a CFMWS table, at early boot the kernel parses all CFMWS tables to
detect all CXL memory regions and assigns a 'faked' NUMA node for each
of them, starting from the highest NUMA node ID enumerated via the SRAT.
This increases the 'nr_node_ids'. E.g., on the aforementioned Intel GNR
platform which has 4 NUMA nodes and 18 CFMWS tables, it increases to 22.
This results in the 'get_mempolicy' syscall failure on that platform,
because currently 'maxnode' is hard-coded to 8 but the 'get_mempolicy'
syscall requires the 'maxnode' to be not smaller than the 'nr_node_ids'.
Increase the 'maxnode' to the number of bits of 'nodemask', which is
'unsigned long', to fix this.
This may not cover all systems. Perhaps a better way is to always set
the 'nodemask' and 'maxnode' based on the actual maximum NUMA node ID on
the system, but for now just do the simple way.
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221014
Closes: https://lore.kernel.org/all/bug-221014-28872@https.bugzilla.kernel.org%2F
Signed-off-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260302205158.178058-1-kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"15 hotfixes. 6 are cc:stable. 14 are for MM.
Singletons, with one doubleton - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-09-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS, mailmap: update email address for Lorenzo Stoakes
mm/mmu_notifier: clean up mmu_notifier.h kernel-doc
uaccess: correct kernel-doc parameter format
mm/huge_memory: fix a folio_split() race condition with folio_try_get()
MAINTAINERS: add co-maintainer and reviewer for SLAB ALLOCATOR
MAINTAINERS: add RELAY entry
memcg: fix slab accounting in refill_obj_stock() trylock path
mm/hugetlb.c: use __pa() instead of virt_to_phys() in early bootmem alloc code
zram: rename writeback_compressed device attr
tools/testing: fix testing/vma and testing/radix-tree build
Revert "ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()"
mm/cma: move put_page_testzero() out of VM_WARN_ON in cma_release()
mm/damon/core: clear walk_control on inactive context in damos_walk()
mm: memfd_luo: always dirty all folios
mm: memfd_luo: always make all folios uptodate
|
|
For commit b0dcdcb9ae75 ("resolve_btfids: Fix linker flags detection"),
I suggested setting HOSTPKG_CONFIG to $PKG_CONFIG when compiling
resolve_btfids, but I forgot the quotes around that variable.
As a result, when running vmtest.sh with static linking, it fails as
follows:
$ LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh
[...]
make: unrecognized option '--static'
Usage: make [options] [target] ...
[...]
This worked when I tested it because HOSTPKG_CONFIG didn't have a
default value in the resolve_btfids Makefile, but once it does, the
quotes aren't preserved and it fails on the next make call.
Fixes: b0dcdcb9ae75 ("resolve_btfids: Fix linker flags detection")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/abADBwn_ykblpABE@mail.gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
disabled
When SMT is present and disabled, turbostat may under-size
the thread_data array. This can corrupt results or
cause turbostat to exit with a segmentation fault.
[lenb: commit message]
Fixes: a2b4d0f8bf07 ("tools/power turbostat: Favor cpu# over core#")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add a test case to ensure that BPF_END operations correctly break
register's scalar ID ties.
The test creates a scenario where r1 is a copy of r0, r0 undergoes a
byte swap, and then r0 is checked against a constant.
- Without the fix in the verifier, the bounds learned from r0 are
incorrectly propagated to r1, making the verifier believe r1 is
bounded and wrongly allowing subsequent pointer arithmetic.
- With the fix, r1 remains an unbounded scalar, and the verifier
correctly rejects the arithmetic operation between the frame pointer
and the unbounded register.
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260304083228.142016-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A copy-paste of a similar issue fixed by Peter Collingbourne in:
https://lore.kernel.org/linux-perf-users/20260304190613.2507582-1-pcc@google.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hashmap__new() function never returns NULL, it returns error
pointers. Fix the error checking to match.
Additionally, set ftrace->profile_hash to NULL on error, and return the
exact error code from hashmap__new().
Fixes: 0f223813edd051a5 ("perf ftrace: Add 'profile' command")
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hashmap__new() function never returns NULL, it returns error
pointers. Fix the error checking to match.
Additionally, set src->samples to NULL to prevent any later code from
accidentally using the error pointer.
Fixes: d3e7cad6f36d9e80 ("perf annotate: Add a hashmap for symbol histogram")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update the header to pull in the changes from commit 3285c471d0c0b991
("coresight: Remove misleading definitions").
Signed-off-by: James Clark <james.clark@linaro.org>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/557db631-aef8-43b1-9f45-fae75910ccb4@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These #defines have been removed from the kernel headers in favour of
the string based PMU format attributes. Usages were previously removed
from the recording side of cs-etm in Perf. Finish the removal by
removing usages from the decode side too.
It's a straight replacement of the old #defines with the new register
bit definitions. Except cs_etm__setup_timeless_decoding() which wasn't
looking at the saved metadata and was instead hard coding an access to
'attr.config'. This was vulnerable to the same issue of .config being
moved to .config2 etc that the original removal of ETM_OPT_* tried to
fix. So fix that too.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 7.0-rc4 from Shuah Khan:
"linux-cpupower-7.0-rc4
- Adds support for setting EPP via systemd service
- Fixes swapped power/energy unit labels
- Adds intel_pstate turbo boost support for Intel platforms"
* tag 'linux-cpupower-7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Add intel_pstate turbo boost support for Intel platforms
cpupower: Add support for setting EPP via systemd service
cpupower: fix swapped power/energy unit labels
|