| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
|
|
Test that libbpf_sha256() calculates SHA-256 digests correctly.
Tested with:
make -C tools/testing/selftests/bpf/
./tools/testing/selftests/bpf/test_progs -t sha256 -v
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
linux/unaligned.h include dependency is causing issues for libbpf's
Github mirror due to {get,put}_unaligned_be32() usage.
So get rid of it by implementing custom variants of those macros that
will work both in kernel and Github mirror repos.
Also switch round_up() to roundup(), as the former is not available in
Github mirror (and is just a subtly more specific variant of roundup()
anyways).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Move sha256 implementation out of already large and unwieldy libbpf.c
into libbpf_utils.c where we'll keep reusable helpers.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Get rid of str_err.{c,h} by moving implementation of libbpf_errstr()
into libbpf_utils.c and declarations into libbpf_internal.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
libbpf_strerror_r() is not exposed as public API and neither is it used
inside libbpf itself. Remove it altogether.
Same for STRERR_BUFSIZE, it's just an orphaned leftover constant which
we missed to clean up some time earlier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Libbpf is missing one convenient place to put common "utils"-like code
that is generic and usable from multiple places. Use libbpf_errno.c as
the base for more generic libbpf_utils.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Add a test case for BPF_NEG operation on CONST_PTR_TO_MAP. Tests if
BPF_NEG operation on map_ptr is rejected in unprivileged mode and is a
scalar value and do not trigger Oops in privileged mode.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251001191739.2323644-3-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We will segfault once we call realloc in bpf_get_addrs due to
wrong size argument.
Fixes: 6302bdeb91df ("selftests/bpf: Add a kprobe_multi subtest to use addrs instead of syms")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use proper 'called' variable name.
Fixes: ae28ed4578e6 ("Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/aN0JVRynHxqKy4lw@krava/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 0e2fb011a0ba ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
The uprobe syscall tests got in from tip tree, using sys_gettid in there.
Fixes: 0e2fb011a0ba ("selftests/bpf: Clean up open-coded gettid syscall invocations")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Removed in favor of the shell script version.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'import perf' test needs to set up a path to the python module as
well as to know the python command to invoke.
These are hard coded at build time to be build a directory and the
python used in the build, which is less than desirable.
Avoid the hard coded values by reusing the existing shell script python
setup and determine a potential built python module via the path of the
perf executable.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
BRBE emits IRQ and ERET branches for branching and returning from
trapped instructions. Add a test that loops on a trapped instruction
(MRS - Read special register) for this.
Extend the expected 'any_call' branches to include FAULT_DATA and
FAULT_INST as these are emitted by BRBE.
Reviewed-by: Ian Rogers <irogers@google.com>
Co-developed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test that SYSCALL type branches are emitted from the expected 'getppid'
symbol. Test that when only 'k' is used, sources addresses are all in
the kernel. Test that no kernel addresses leak by checking for them in
the 'u' test.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
check_branches() will be used by other tests in a later commit so make
it a function. And the any_call filters are duplicated and will also
be extended in a later commit, so move them to a variable.
No functional changes intended.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't open evsels on all CPUs, open them just on the CPUs they
support. This avoids opening say an e-core event on a p-core and
getting a failure - achieve this by getting rid of the "all_cpu_map".
In install_pe functions don't use the cpu_map_idx as a CPU number,
translate the cpu_map_idx, which is a dense index into the cpu_map
skipping holes at the beginning, to a proper CPU number.
Before:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
566,270,672 cpu_core/cycles/
<not supported> cpu_atom/instructions/
572,792,836 cpu_core/instructions/ # 1.01 insn per cycle
1.001595384 seconds time elapsed
```
After:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
443,299,201 cpu_atom/cycles/
1,233,919,737 cpu_core/cycles/
213,634,112 cpu_atom/instructions/ # 0.48 insn per cycle
2,758,965,527 cpu_core/instructions/ # 2.24 insn per cycle
1.001699485 seconds time elapsed
```
Fixes: 7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: bpf@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reduce the API surface that is in bpf_counter.h, this helps compiler
analysis like unused static function, makes it easier to set a
breakpoint and just makes it easier to see the code is self contained.
When code is shared between BPF C code, put it inside HAVE_BPF_SKEL.
Move transitively found #includes into appropriate C files.
No functional change.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix the logic which checks for pdflatex. Currently, it complains
for both pdfdocs and latexdocs, but for the latter, all it is
needed is Sphinx.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-doc/cover.1758881658.git.mchehab+huawei@kernel.org/T/#ma81ff2e11b8579e5edc23e4381e464081ae668b7
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <313df7b4aab653e8fc40c30120c0dbebf8a0bcb1.1759328070.git.mchehab+huawei@kernel.org>
|
|
Remove the arch-specific guard around TYPE_STATE_MAX_REGS and define it
as 32 for all architectures.
The architecture that perf is built on may not match the architecture
that produced the perf.data file, so relying on __powerpc__ or similar
is fragile.
Using 32 as a fixed upper bound is safe since it is greater than the
previous maximum of 16.
Add a comment to clarify that TYPE_STATE_MAX_REGS is an arch-independent
maximum rather than a build-time choice.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The process_event() function in "builtin-script.c" invokes
perf_sample__fprintf_synth() for displaying PERF_TYPE_SYNTH
type events.
if (attr->type == PERF_TYPE_SYNTH && PRINT_FIELD(SYNTH))
perf_sample__fprintf_synth(sample, evsel, fp);
perf_sample__fprintf_synth() process the sample depending on the value
in evsel->core.attr.config. Introduce perf_sample__fprintf_synth_vpadtl()
and invoke this for PERF_SYNTH_POWERPC_VPA_DTL
Sample output:
./perf record -a -e sched:*,vpa_dtl/dtl_all/ -c 1000000000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.300 MB perf.data ]
./perf script
perf 13322 [002] 233.835807: sched:sched_switch: perf:13322 [120] R ==> migration/2:27 [0]
migration/2 27 [002] 233.835811: sched:sched_migrate_task: comm=perf pid=13322 prio=120 orig_cpu=2 dest_cpu=3
migration/2 27 [002] 233.835818: sched:sched_stat_runtime: comm=migration/2 pid=27 runtime=9214 [ns]
migration/2 27 [002] 233.835819: sched:sched_switch: migration/2:27 [0] S ==> swapper/2:0 [120]
swapper 0 [002] 233.835822: vpa-dtl: timebase: 338954486062657 dispatch_reason:decrementer_interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:435, ready_to_enqueue_time:0, waiting_to_ready_time:34775058, processor_id: 202 c0000000000f8094 plpar_hcall_norets_notrace+0x18 ([kernel.kallsyms])
swapper 0 [001] 233.835886: vpa-dtl: timebase: 338954486095398 dispatch_reason:priv_doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:542, ready_to_enqueue_time:0, waiting_to_ready_time:1245360, processor_id: 201 c0000000000f8094 plpar_hcall_norets_notrace+0x18 ([kernel.kallsyms])
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Create samples from DTL entries for displaying in 'perf report'
and 'perf script'.
When the different PERF_RECORD_XX records are processed from perf
session, powerpc_vpadtl_process_event() will be invoked.
For each of the PERF_RECORD_XX record, compare the timestamp of perf
record with timestamp of top element in the auxtrace heap.
Process the auxtrace queue if the timestamp of element from heap is
lower than timestamp from entry in perf record.
Sometimes it could happen that one buffer is only partially processed.
if the timestamp of occurrence of another event is more than currently
processed element in the queue, it will move on to next perf record.
So keep track of position of buffer to continue processing next time.
Update the timestamp of the auxtrace heap with the timestamp of last
processed entry from the auxtrace buffer.
Generate perf sample for each entry in the dispatch trace log.
Fill in the sample details:
- sample ip is picked from srr0 field of dtl_entry
- sample cpu is picked from processor_id of dtl_entry
- sample id is from sample_id of powerpc_vpadtl
- cpumode is set to PERF_RECORD_MISC_KERNEL
- Additionally save the details in raw_data of sample.
This is to print the relevant fields in perf_sample__fprintf_synth()
when called from builtin-script
The sample is processed by calling perf_session__deliver_synth_event()
so that it gets included in perf report.
Sample Output:
./perf record -a -e sched:*,vpa_dtl/dtl_all/ -c 1000000000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.300 MB perf.data ]
./perf report
# Samples: 321 of event 'vpa-dtl'
# Event count (approx.): 321
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................. ..............................
#
100.00% 100.00% swapper [kernel.kallsyms] [k] plpar_hcall_norets_notrace
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
other events across CPU's
When the Dispatch Trace Log data is collected along with other events
like sched tracepoint events, it needs to be correlated and present
interleaved along with these events.
Perf events can be collected parallely across the CPUs. Hence it needs
to be ensured events/dtl entries are processed in timestamp order.
An auxtrace_queue is created for each CPU.
Data within each queue is in increasing order of timestamp. Each
auxtrace queue has a array/list of auxtrace buffers.
When processing the auxtrace buffer, the data is mmapp'ed.
All auxtrace queues is maintained in auxtrace heap.
Each queue has a queue number and a timestamp.
The queues are sorted/added to head based on the time stamp.
So always the lowest timestamp (entries to be processed first) is on top
of the heap.
The auxtrace queue needs to be allocated and heap needs to be populated
in the sorted order of timestamp.
The queue needs to be filled with data only once via
powerpc_vpadtl__update_queues() function.
powerpc_vpadtl__setup_queues() iterates through all the entries to
allocate and setup the auxtrace queue.
To add to auxtrace heap, it is required to fetch the timebase of first
entry for each of the queue.
The first entry in the queue for VPA DTL PMU has the boot timebase,
frequency details which are needed to get timestamp which is required to
correlate with other events.
The very next entry is the actual trace data that provides timestamp for
occurrence of DTL event.
Formula used to get the timestamp from dtl entry is:
((timbase from DTL entry - boot time) / frequency) * 1000000000
powerpc_vpadtl_decode() adds the boot time and frequency as part of
powerpc_vpadtl_queue structure so that it can be reused.
Each of the dtl_entry is of 48 bytes size. Sometimes it could happen
that one buffer is only partially processed (if the timestamp of
occurrence of another event is more than currently processed element in
queue, it will move on to next event).
In order to keep track of position of buffer, additional fields is added
to powerpc_vpadtl_queue structure.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
DTL samples
Dispatch Trace Log details are captured as-is in PERF_RECORD_AUXTRACE
records.
To present dtl entries as samples, create an event with name as
"vpa-dtl" and type PERF_TYPE_SYNTH.
Add perf_synth_id, "PERF_SYNTH_POWERPC_VPA_DTL" as config value for the
event.
Create a sample id to be a fixed offset from evsel id.
To present the relevant fields from the "struct dtl_entry", prepare the
entries as events of type PERF_TYPE_SYNTH.
By defining as PERF_TYPE_SYNTH type, samples can be printed as part of
perf_sample__fprintf_synth in builtin-script.c
From powerpc_vpadtl_process_auxtrace_info(), invoke
auxtrace_queues__process_index() function which will queue the auxtrace
buffers by invoke auxtrace_queues__add_event().
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add VPA DTL PMU auxtrace process function for "perf report -D".
The auxtrace event processing functions are defined in file
"util/powerpc-vpadtl.c".
Data structures used includes "struct powerpc_vpadtl_queue", "struct
powerpc_vpadtl" to store the auxtrace buffers in queue. Different
PERF_RECORD_XXX are generated during recording.
PERF_RECORD_AUXTRACE_INFO is processed first since it is of type
perf_user_event_type and perf session event delivers
perf_session__process_user_event() first.
Define function powerpc_vpadtl_process_auxtrace_info() to handle the
processing of PERF_RECORD_AUXTRACE_INFO records.
In this function, initialize the aux buffer queues using
auxtrace_queues__init().
Setup the required infrastructure for aux data processing.
The data is collected per CPU and auxtrace_queue is created for each
CPU.
Define powerpc_vpadtl_process_event() function to process
PERF_RECORD_AUXTRACE records.
In this, add the event to queue using auxtrace_queues__add_event() and
process the buffer in powerpc_vpadtl_dump_event().
The first entry in the buffer with timebase as zero has boot timebase
and frequency.
Remaining data is of format for "struct powerpc_vpadtl_entry".
Define the translation for dispatch_reasons and preempt_reasons, report
this when dump trace is invoked via powerpc_vpadtl_dump()
Sample output:
./perf record -a -e sched:*,vpa_dtl/dtl_all/ -c 1000000000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.300 MB perf.data ]
./perf report -D
0 0 0x39b10 [0x30]: PERF_RECORD_AUXTRACE size: 0x690 offset: 0 ref: 0 idx: 0 tid: -1 cpu: 0
.
. ... VPA DTL PMU data: size 1680 bytes, entries is 35
. 00000000: boot_tb: 21349649546353231, tb_freq: 512000000
. 00000030: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:7064, ready_to_enqueue_time:187, waiting_to_ready_time:6611773
. 00000060: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:146, ready_to_enqueue_time:0, waiting_to_ready_time:15359437
. 00000090: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:4868, ready_to_enqueue_time:232, waiting_to_ready_time:5100709
. 000000c0: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:179, ready_to_enqueue_time:0, waiting_to_ready_time:30714243
. 000000f0: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:197, ready_to_enqueue_time:0, waiting_to_ready_time:15350648
. 00000120: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:213, ready_to_enqueue_time:0, waiting_to_ready_time:15353446
. 00000150: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:212, ready_to_enqueue_time:0, waiting_to_ready_time:15355126
. 00000180: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:6368, ready_to_enqueue_time:164, waiting_to_ready_time:5104665
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The powerpc PMU collecting Dispatch Trace Log (DTL) entries makes use of
AUX support in perf infrastructure.
The PMU driver has the functionality to collect trace entries in the aux
buffer.
On the tools side, this data is made available as PERF_RECORD_AUXTRACE
records.
This record is generated by "perf record" command.
To enable the creation of PERF_RECORD_AUXTRACE, add functions to
initialize auxtrace records ie "auxtrace_record__init()".
Fill in fields for other callbacks like info_priv_size, info_fill, free,
recording options etc.
Define auxtrace_type as PERF_AUXTRACE_VPA_DTL. Add header file to
define vpa dtl pmu specific details.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A union is used to set the priv value in thread (a void*) to a boolean
value through type punning. Undefined behavior sanitizer fails on this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Test cases from perftool_testsuite are affected by the current
directory where the test are run. For this reason, the test
driver has to change the directory to the base_dir for references to
work correctly.
Utilize absolute paths when sourcing and referencing other scripts so
that the current working directory doesn't impact the test cases.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jakub Brnak <jbrnak@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
- "the the"
- "in in"
- "a a"
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
tools/testing/selftests/drivers/net/bonding/Makefile
87951b566446 selftests: bonding: add test for passive LACP mode
c2377f1763e9 selftests: bonding: add test for LACP actor port priority
Adjacent changes:
drivers/net/ethernet/cadence/macb.h
fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf169e net: macb: Add TAPRIO traffic scheduling support
drivers/net/ethernet/cadence/macb_main.c
fca3dc859b20 net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf169e net: macb: Add TAPRIO traffic scheduling support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
"Only small bugfixes and cleanups"
* tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add stdbool.h to nolibc includes
tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers
selftests/nolibc: remove outdated comment about construct order
selftests/nolibc: fix EXPECT_NZ macro
tools/nolibc: drop wait4() support
kselftest/arm64: tpidr2: Switch to waitpid() over wait4()
tools/nolibc: fold llseek fallback into lseek()
tools/nolibc: remove __nolibc_enosys() fallback from fork functions
tools/nolibc: remove __nolibc_enosys() fallback from dup2()
tools/nolibc: remove __nolibc_enosys() fallback from *at() functions
tools/nolibc: remove __nolibc_enosys() fallback from time64-related functions
tools/nolibc: use tabs instead of spaces for indentation
tools/nolibc: avoid error in dup2() if old fd equals new fd
selftests/nolibc: always compile the kernel with GCC
selftests/nolibc: don't pass CC to toplevel Makefile
selftests/nolibc: deduplicate invocations of toplevel Makefile
selftests/nolibc: be more specific about variables affecting nolibc-test
tools/nolibc: fix error return value of clock_nanosleep()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
"A set of updates for futexes and related selftests:
- Plug the ptrace_may_access() race against a concurrent exec() which
allows to pass the check before the target's process transition in
exec() by taking a read lock on signal->ext_update_lock.
- A large set of cleanups and enhancement to the futex selftests. The
bulk of changes is the conversion to the kselftest harness"
* tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
selftest/futex: Fix spelling mistake "boundarie" -> "boundary"
selftests/futex: Remove logging.h file
selftests/futex: Drop logging.h include from futex_numa
selftests/futex: Refactor futex_numa_mpol with kselftest_harness.h
selftests/futex: Refactor futex_priv_hash with kselftest_harness.h
selftests/futex: Refactor futex_waitv with kselftest_harness.h
selftests/futex: Refactor futex_requeue with kselftest_harness.h
selftests/futex: Refactor futex_wait with kselftest_harness.h
selftests/futex: Refactor futex_wait_private_mapped_file with kselftest_harness.h
selftests/futex: Refactor futex_wait_unitialized_heap with kselftest_harness.h
selftests/futex: Refactor futex_wait_wouldblock with kselftest_harness.h
selftests/futex: Refactor futex_wait_timeout with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_signal_restart with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_mismatched_ops with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi with kselftest_harness.h
selftests: kselftest: Create ksft_print_dbg_msg()
futex: Don't leak robust_list pointer on exec race
selftest/futex: Compile also with libnuma < 2.0.16
selftest/futex: Reintroduce "Memory out of range" numa_mpol's subtest
selftest/futex: Make the error check more precise for futex_numa_mpol
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction decoder update from Borislav Petkov:
- Add instruction decoding support for the XOP-prefixed instruction set
present on the AMD Bulldozer uarch
[ These instructions don't normally happen, but a X86_NATIVE_CPU build
on a bulldozer host can make the compiler then use these unusual
instruction encodings ]
* tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Add XOP prefix instructions decoder support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
|
|
KVM x86 CET virtualization support for 6.18
Add support for virtualizing Control-flow Enforcement Technology (CET) on
Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks).
CET is comprised of two distinct features, Shadow Stacks (SHSTK) and Indirect
Branch Tracking (IBT), that can be utilized by software to help provide
Control-flow integrity (CFI). SHSTK defends against backward-edge attacks
(a.k.a. Return-oriented programming (ROP)), while IBT defends against
forward-edge attacks (a.k.a. similarly CALL/JMP-oriented programming (COP/JOP)).
Attackers commonly use ROP and COP/JOP methodologies to redirect the control-
flow to unauthorized targets in order to execute small snippets of code,
a.k.a. gadgets, of the attackers choice. By chaining together several gadgets,
an attacker can perform arbitrary operations and circumvent the system's
defenses.
SHSTK defends against backward-edge attacks, which execute gadgets by modifying
the stack to branch to the attacker's target via RET, by providing a second
stack that is used exclusively to track control transfer operations. The
shadow stack is separate from the data/normal stack, and can be enabled
independently in user and kernel mode.
When SHSTK is is enabled, CALL instructions push the return address on both the
data and shadow stack. RET then pops the return address from both stacks and
compares the addresses. If the return addresses from the two stacks do not
match, the CPU generates a Control Protection (#CP) exception.
IBT defends against backward-edge attacks, which branch to gadgets by executing
indirect CALL and JMP instructions with attacker controlled register or memory
state, by requiring the target of indirect branches to start with a special
marker instruction, ENDBRANCH. If an indirect branch is executed and the next
instruction is not an ENDBRANCH, the CPU generates a #CP. Note, ENDBRANCH
behaves as a NOP if IBT is disabled or unsupported.
From a virtualization perspective, CET presents several problems. While SHSTK
and IBT have two layers of enabling, a global control in the form of a CR4 bit,
and a per-feature control in user and kernel (supervisor) MSRs (U_CET and S_CET
respectively), the {S,U}_CET MSRs can be context switched via XSAVES/XRSTORS.
Practically speaking, intercepting and emulating XSAVES/XRSTORS is not a viable
option due to complexity, and outright disallowing use of XSTATE to context
switch SHSTK/IBT state would render the features unusable to most guests.
To limit the overall complexity without sacrificing performance or usability,
simply ignore the potential virtualization hole, but ensure that all paths in
KVM treat SHSTK/IBT as usable by the guest if the feature is supported in
hardware, and the guest has access to at least one of SHSTK or IBT. I.e. allow
userspace to advertise one of SHSTK or IBT if both are supported in hardware,
even though doing so would allow a misbehaving guest to use the unadvertised
feature.
Fully emulating SHSTK and IBT would also require significant complexity, e.g.
to track and update branch state for IBT, and shadow stack state for SHSTK.
Given that emulating large swaths of the guest code stream isn't necessary on
modern CPUs, punt on emulating instructions that meaningful impact or consume
SHSTK or IBT. However, instead of doing nothing, explicitly reject emulation
of such instructions so that KVM's emulator can't be abused to circumvent CET.
Disable support for SHSTK and IBT if KVM is configured such that emulation of
arbitrary guest instructions may be required, specifically if Unrestricted
Guest (Intel only) is disabled, or if KVM will emulate a guest.MAXPHYADDR that
is smaller than host.MAXPHYADDR.
Lastly disable SHSTK support if shadow paging is enabled, as the protections
for the shadow stack are novel (shadow stacks require Writable=0,Dirty=1, so
that they can't be directly modified by software), i.e. would require
non-trivial support in the Shadow MMU.
Note, AMD CPUs currently only support SHSTK. Explicitly disable IBT support
so that KVM doesn't over-advertise if AMD CPUs add IBT, and virtualizing IBT
in SVM requires KVM modifications.
|
|
KVM x86 changes for 6.18
- Don't (re)check L1 intercepts when completing userspace I/O to fix a flaw
where a misbehaving usersepace (a.k.a. syzkaller) could swizzle L1's
intercepts and trigger a variety of WARNs in KVM.
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is
supposed to exist for v2 PMUs.
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs.
- Clean up KVM's vector hashing code for delivering lowest priority IRQs.
- Clean up the fastpath handler code to only handle IPIs and WRMSRs that are
actually "fast", as opposed to handling those that KVM _hopes_ are fast, and
in the process of doing so add fastpath support for TSC_DEADLINE writes on
AMD CPUs.
- Clean up a pile of PMU code in anticipation of adding support for mediated
vPMUs.
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside of
forced emulation and other contrived testing scenarios).
- Clean up the MSR APIs in preparation for CET and FRED virtualization, as
well as mediated vPMU support.
- Rejecting a fully in-kernel IRQCHIP if EOIs are protected, i.e. for TDX VMs,
as KVM can't faithfully emulate an I/O APIC for such guests.
- KVM_REQ_MSR_FILTER_CHANGED into a generic RECALC_INTERCEPTS in preparation
for mediated vPMU support, as KVM will need to recalculate MSR intercepts in
response to PMU refreshes for guests with mediated vPMUs.
- Misc cleanups and minor fixes.
|
|
KVM selftests changes for 6.18
- Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.18
1. Add PTW feature detection on new hardware.
2. Add sign extension with kernel MMIO/IOCSR emulation.
3. Improve in-kernel IPI emulation.
4. Improve in-kernel PCH-PIC emulation.
5. Move kvm_iocsr tracepoint out of generic code.
|
|
KVM/riscv changes for 6.18
- Added SBI FWFT extension for Guest/VM with misaligned
delegation and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V such as
access_tracking_perf_test, dirty_log_perf_test,
memslot_modification_stress_test, memslot_perf_test,
mmu_stress_test, and rseq_test
- Added SBI v3.0 PMU enhancements in KVM and perf driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.18
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
[Pull into kvm/master to fix conflicts. - Paolo]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new
helpers, removing redundant code paths, and improving error handling
for better maintainability.
- A few bug fixes to cpuset including fixes for partition creation
failures when isolcpus is in use, missing error returns, and null
pointer access prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better
scalability, workqueue conversions to use WQ_PERCPU and
system_percpu_wq to prepare for workqueue default switching from
percpu to unbound, and removal of unused code including the
post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function
safety improvements, and 64-bit division fixes.
* tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (39 commits)
cpuset: remove is_prs_invalid helper
cpuset: remove impossible warning in update_parent_effective_cpumask
cpuset: remove redundant special case for null input in node mask update
cpuset: fix missing error return in update_cpumask
cpuset: Use new excpus for nocpu error check when enabling root partition
cpuset: fix failure to enable isolated partition when containing isolcpus
Documentation: cgroup-v2: Sync manual toctree
cpuset: use partition_cpus_change for setting exclusive cpus
cpuset: use parse_cpulist for setting cpus.exclusive
cpuset: introduce partition_cpus_change
cpuset: refactor cpus_allowed_validate_change
cpuset: refactor out validate_partition
cpuset: introduce cpus_excl_conflict and mems_excl_conflict helpers
cpuset: refactor CPU mask buffer parsing logic
cpuset: Refactor exclusive CPU mask computation logic
cpuset: change return type of is_partition_[in]valid to bool
cpuset: remove unused assignment to trialcs->partition_root_state
cpuset: move the root cpuset write check earlier
cgroup/cpuset: Remove redundant rcu_read_lock/unlock() in spin_lock
cgroup: Remove redundant rcu_read_lock/unlock() in spin_lock
...
|
|
Update sierraforest events to v1.12 released in:
https://github.com/intel/perfmon/commit/8279984b0b2eef35412c0281983ef59ae74f19ed
Event JSON automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update sapphirerapids events to v1.35 released in:
https://github.com/intel/perfmon/commit/94ed947d7b5966e50a685118f69e8942976ec397
https://github.com/intel/perfmon/commit/9d993957a2a8fc1d4f843013c979a413141e9839
Also adds cpu_cstate_c0 and cpu_cstate_c6 metrics.
Event JSON automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update pantherlake events to v1.00 released in:
https://github.com/intel/perfmon/commit/b149786b6f9db18c09e6c89f3eb4fdb849ead2cf
Event JSON automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
