| Age | Commit message (Collapse) | Author |
|---|
|
Three tests are added:
- invalidate_pkt_pointers_by_tail_call checks that one can use the
packet pointer after a tail call. This was originally possible
and also poses not problems, but was made impossible by 1a4607ffba35.
- invalidate_pkt_pointers_by_static_tail_call tests a corner case
found by Eduard Zingerman during the discussion of the original fix,
which was broken in that fix.
- subprog_result_tail_call tests that precision propagation works
correctly across tail calls. This did not work before.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-3-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
commit 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
arm64 JIT now supports gotox instruction and jumptables, so run tests in
verifier_gotox.c for arm64.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251117130732.11107-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The select_reuseport selftest uses a custom sa46 union to represent
IPv4 and IPv6 addresses. This custom wrapper requires extra manual
handling for address family and field extraction.
Replace sa46 with sockaddr_storage and update the helper functions to
operate on native socket structures. This simplifies the code and
removes unnecessary custom address-handling logic. No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-3-hoyeon.lee@suse.com
|
|
The cls_redirect test uses a custom addr_port/tuple wrapper to represent
IPv4/IPv6 addresses and ports. This custom wrapper requires extra
conversion logic and specific helpers such as fill_addr_port(), which
are no longer necessary when using standard socket address structures.
This commit replaces addr_port/tuple with the standard sockaddr_storage
so test handles address families and ports using native socket types.
It removes the custom helper, eliminates redundant casts, and simplifies
the setup helpers without functional changes. set_up_conn() and
build_input() now take src/dst sockaddr_storage directly.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-2-hoyeon.lee@suse.com
|
|
Call paths leading to __virt_pg_map() are currently:
(a) virt_pg_map() -> virt_arch_pg_map() -> __virt_pg_map()
(b) virt_map_level() -> __virt_pg_map()
For (a), calls to virt_pg_map() from kvm_util.c make sure they update
vm->vpages_mapped, but other callers do not. Move the sparsebit_set()
call into virt_pg_map() to make sure all callers are captured.
For (b), call sparsebit_set_num() from virt_map_level().
It's tempting to have a single the call inside __virt_pg_map(), however:
- The call path in (a) is not x86-specific, while (b) is. Moving the
call into __virt_pg_map() would require doing something similar for
other archs implementing virt_pg_map().
- Future changes will reusue __virt_pg_map() for nested PTEs, which should
not update vm->vpages_mapped, i.e. a triple underscore version that does
not update vm->vpages_mapped would need to be provided.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-12-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Replace __virt_pg_map() calls in tests by high-level equivalent
functions, removing some loops in the process.
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251021074736.1324328-11-yosry.ahmed@linux.dev
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that this was rewritten in Python, we can remove the old
tool.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <1f53e0fa48616af189ce98b45a65cc0c245e7aaf.1763492868.git.mchehab+huawei@kernel.org>
|
|
As we want to call Python code directly at the Sphinx extension,
convert get_feat.pl to Python.
The code was made to be (almost) bug-compatible with the Perl
version, with two exceptions:
1. Currently, Perl script outputs a wrong table if arch is set
to a non-existing value;
2. the ReST table output when --feat is used without --arch
has an invalid format, as the number of characters for the
table delimiters are wrong.
Those two bugs were fixed while testing the conversion.
Additionally, another caveat was solved:
the output when --feat is used without arch and the feature
doesn't exist doesn't contain an empty table anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <03c26cee1ec567804735a33047e625ef5ab7bfa8.1763492868.git.mchehab+huawei@kernel.org>
|
|
Each alternative of a group alternative depends on a specific
feature and flags. Provide access to the feature/flags for each
alternative as an attribute (feature) in struct alt_group.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-26-alexandre.chartre@oracle.com
|
|
When using the --disas option, alternatives are disassembled but
address references in non-default alternatives can be incorrect.
The problem is that alternatives are shown as if they were replacing the
original code of the alternative. So if an alternative is referencing
an address inside the alternative then the reference has to be
adjusted to the location of the original code.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-25-alexandre.chartre@oracle.com
|
|
When using the --disas option, also disassemble jump tables.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-24-alexandre.chartre@oracle.com
|
|
When using the --disas option, also disassemble exception tables
(EX_TABLE).
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-23-alexandre.chartre@oracle.com
|
|
All alternatives are disassemble side-by-side when using the --disas
option. However the address of each instruction is not printed because
instructions from different alternatives are not necessarily aligned.
Change this behavior to print the address of each instruction. Spaces
will appear between instructions from the same alternative when
instructions from different alternatives do not have the same alignment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-22-alexandre.chartre@oracle.com
|
|
When using the --disas option, disassemble all group alternatives.
Jump tables and exception tables (which are handled as alternatives)
are not disassembled at the moment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-21-alexandre.chartre@oracle.com
|
|
When using the --disas option, objtool doesn't currently disassemble
any alternative. Print an header for each alternative. This identifies
places where alternatives are present but alternative code is still
not disassembled at the moment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-20-alexandre.chartre@oracle.com
|
|
Preserve the order in which alternatives are defined. Currently
objtool stores alternatives in a list in reverse order.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-19-alexandre.chartre@oracle.com
|
|
Add the --disas=<function-pattern> actions to disassemble the specified
functions. The function pattern can be a single function name (e.g.
--disas foo to disassemble the function with the name "foo"), or a shell
wildcard pattern (e.g. --disas foo* to disassemble all functions with a
name starting with "foo").
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-18-alexandre.chartre@oracle.com
|
|
The .return_sites and .call_sites sections reference text addresses,
but not with the intent to indirect branch to them, so they don't
need to be validated for IBT.
This is useful when running objtool on object files which already
have .return_sites or .call_sites sections, for example to re-run
objtool after it has reported an error or a warning.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-17-alexandre.chartre@oracle.com
|
|
When tracing function validation, improve the reporting of
alternative instruction by more clearly showing the different
alternatives beginning and end.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-16-alexandre.chartre@oracle.com
|
|
Add the disas_alt_name() and disas_alt_type_name() to provide a
name and a type name for an alternative. This will be used to
better name alternatives when tracing their execution.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-15-alexandre.chartre@oracle.com
|
|
Alternative code, including jump table and exception table, is represented
with the same struct alternative structure. But there is no obvious way to
identify whether the struct represents alternative instructions, a jump
table or an exception table.
So add a type to struct alternative to clearly identify the type of
alternative.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-14-alexandre.chartre@oracle.com
|
|
When tracing function validation, instruction state changes can
report changes involving registers. These registers are reported
with the name "r<num>" (e.g. "r3"). Print the CPU specific register
name instead of a generic name (e.g. print "rbx" instead of "r3"
on x86).
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-13-alexandre.chartre@oracle.com
|
|
During function validation, objtool maintains a per-instruction state,
in particular to track call frame information. When tracing validation,
print any instruction state changes.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-12-alexandre.chartre@oracle.com
|
|
Add an option to trace and have information during the validation
of specified functions. Functions are specified with the --trace
option which can be a single function name (e.g. --trace foo to
trace the function with the name "foo"), or a shell wildcard
pattern (e.g. --trace foo* to trace all functions with a name
starting with "foo").
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-11-alexandre.chartre@oracle.com
|
|
Keep track of the maximum length of symbol names. This will help
formatting the code flow between different functions.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-10-alexandre.chartre@oracle.com
|
|
The code to validate a branch loops through all instructions of the
branch and validate each instruction. Move the code to validate an
instruction to a separated function.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-9-alexandre.chartre@oracle.com
|
|
When an instruction warning (WARN_INSN) or backtrace (BT_INSN) is issued,
disassemble the instruction to provide more context.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-8-alexandre.chartre@oracle.com
|
|
When disassembling an instruction store the result instead of directly
printing it.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-7-alexandre.chartre@oracle.com
|
|
Print symbols referenced during disassembly instead of just printing
raw addresses. Also handle address relocation.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-6-alexandre.chartre@oracle.com
|
|
Remove the newline which is printed during feature discovery
when nothing else is printed.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-5-alexandre.chartre@oracle.com
|
|
objtool executes the objdump command to disassemble code. Use libopcodes
instead to have more control about the disassembly scope and output.
If libopcodes is not present then objtool is built without disassembly
support.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-4-alexandre.chartre@oracle.com
|
|
Create a structure to store information for disassembling functions.
For now, it is just a wrapper around an objtool file.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-3-alexandre.chartre@oracle.com
|
|
objtool disassembles functions which have warnings. Move the code
to do that to a dedicated file. The code is just moved, it is not
changed.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-2-alexandre.chartre@oracle.com
|
|
Comparing to exactly 1 will fail if more than one ring buffer
event was seen since the last call to timerlat_bpf_wait(), which
can happen in some race scenarios.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-5-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
The timerlat "top stop at failed action" test was relying on "ALL" being
printed immediately after the "1" from the threshold action. Besides being
fragile, this depends on stdbuf behavior, which is easy to miss when
recreating the test outside of the framework for debugging purposes.
Instead, use the expected/unexpected text mechanism from the
corresponding osnoise test.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-2-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b014827 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Currently, user can only specify cgroup to the tracer's thread the
following ways:
`-C[cgroup]`
`-C[=cgroup]`
`--cgroup[=cgroup]`
If user tries to specify cgroup as `-C [cgroup]` or `--cgroup [cgroup]`,
the parser silently fails and rtla's cgroup is used for the tracer
threads.
To make interface more user-friendly, allow user to specify cgroup in
the aforementioned way, i.e. `-C [cgroup]` and `--cgroup [cgroup]`.
Refactor identical logic between -t/--trace and -C/--cgroup into a
common function.
Change documentation to reflect this user interface change.
Fixes: a957cbc02531 ("rtla: Add -C cgroup support")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/16132f1565cf5142b5fbd179975be370b529ced7.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_hist_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-6-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_top_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-5-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_hist_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-4-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_top_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-3-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
The code contains some technical debt in error handling,
which complicates the consolidation of duplicated code.
Introduce an fatal() function to replace the common pattern of
err_msg() followed by exit(EXIT_FAILURE), reducing the length of an
already long function.
Further patches using fatal() follow.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-2-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
osnoise test "top stop at failed action" is calling timerlat instead of
osnoise by mistake.
Fix it so that it calls the correct RTLA subcommand.
Fixes: 05b7e10687c6 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
In non-BPF mode, it takes up to 1 second for RTLA to notice that tracing
has been stopped. That means that action tests cannot have a 1 second
duration, as the SIGALRM will be racing with the threshold overflow.
Previously, non-BPF mode actions were buggy and always executed
the action, even when stopping on duration or SIGINT, preventing
this issue from manifesting. Now that this has been fixed, the tests
have become flaky, and this has to be adjusted.
Fixes: 4e26f84abfbb ("rtla/tests: Add tests for actions")
Fixes: 05b7e10687c6 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
|
|
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
section names"
This reverts commit 9c7dc1dd897a1cdcade9566ea4664b03fbabf4a4.
The check-function-names.sh script now provides the function name
checking functionality for all architectures, making the objtool check
redundant.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/c7d549d4de8bd1490d106b99630eea5efc69a4dd.1763669451.git.jpoimboe@kernel.org
|
|
The .cold function parent/child correlation logic has two passes: one in
read_symbols() and one in add_jump_destinations().
The second pass was added with commit cd77849a69cf ("objtool: Fix GCC 8
cold subfunction detection for aliased functions") to ensure that if the
parent symbol had aliases then the canonical symbol was chosen as the
parent.
That solution was rather clunky, not to mention incomplete due to the
existence of alternatives and switch tables. Now that we have
sym->alias, the canonical alias fix can be done much simpler in the
first pass, making the second pass obsolete.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/bdab245a38000a5407f663a031f39e14c67a43d4.1763671318.git.jpoimboe@kernel.org
|
