| Age | Commit message (Collapse) | Author |
|---|
|
Add NUMA helpers to probe for support/availability and to check if the
test is running on a multi-node system. The APIs will be used to verify
guest_memfd NUMA support.
Signed-off-by: Shivank Garg <shivankg@amd.com>
[sean: land helpers in numaif.h, add comments, tweak names]
Link: https://lore.kernel.org/r/20251016172853.52451-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the KVM's re-definitions of MPOL_xxx flags in numaif.h as they are
defined by the already-included, kernel-provided mempolicy.h. The only
reason the duplicate definitions don't cause compiler warnings is because
they are identical, but only on x86-64! The syscall numbers in particular
are subtly x86_64-specific, i.e. will cause problems if/when numaif.h is
used outsize of x86.
Opportunistically clean up the file comment as the license information is
covered by the SPDX header, the path is superfluous, and as above the
comment about the contents is flat out wrong.
Fixes: 346b59f220a2 ("KVM: selftests: Add missing header file needed by xAPIC IPI tests")
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add APIs for all syscalls defined in the kernel's mm/mempolicy.c to match
those that would be provided by linking to libnuma. Opportunistically use
the recently inroduced KVM_SYSCALL_DEFINE() builders to take care of the
boilerplate, and to fix a flaw where the two existing wrappers would
generate multiple symbols if numaif.h were to be included multiple times.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
default
Register handlers for signals for all selftests that are likely happen due
to test (or kernel) bugs, and explicitly fail tests on unexpected signals
so that users get a stack trace, i.e. don't have to go spelunking to do
basic triage.
Register the handlers as early as possible, to catch as many unexpected
signals as possible, and also so that the common code doesn't clobber a
handler that's installed by test (or arch) code.
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add kvm_<sycall> wrappers for munmap(), close(), fallocate(), and
ftruncate() to cut down on boilerplate code when a sycall is expected
to succeed, and to make it easier for developers to remember to assert
success.
Implement and use a macro framework similar to the kernel's SYSCALL_DEFINE
infrastructure to further cut down on boilerplate code, and to drastically
reduce the probability of typos as the kernel's syscall definitions can be
copy+paste almost verbatim.
Provide macros to build the raw <sycall>() wrappers as well, e.g. to
replace hand-coded wrappers (NUMA) or pure open-coded calls.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/r/20251016172853.52451-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The __list_del fuction doesn't set the previous node's next pointer to
the next node of the node to be deleted. It just updates the local variable
and not the actual pointer in the previous node.
The test was passing up till now because the bpf code is doing bpf_free()
after list_del and therfore reading head->first from the userspace will
read all zeroes. But after arena_list_del() is finished, head->first should
point to NULL;
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251017141727.51355-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With latest llvm22, I hit the verif_scale_strobemeta selftest failure
below:
$ ./test_progs -n 618
libbpf: prog 'on_event': BPF program load failed: -E2BIG
libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG --
BPF program is too large. Processed 1000001 insn
verification time 7019091 usec
stack depth 488
processed 1000001 insns (limit 1000000) max_states_per_insn 28 total_states 33927 peak_states 12813 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'on_event': failed to load: -E2BIG
libbpf: failed to load object 'strobemeta.bpf.o'
scale_test:FAIL:expect_success unexpected error: -7 (errno 7)
#618 verif_scale_strobemeta:FAIL
But if I increase the verificaiton insn limit from 1M to 10M, the above
test_progs run actually will succeed. The below is the result from veristat:
$ ./veristat strobemeta.bpf.o
Processing 'strobemeta.bpf.o'...
File Program Verdict Duration (us) Insns States Program size Jited size
---------------- -------- ------- ------------- ------- ------ ------------ ----------
strobemeta.bpf.o on_event success 90250893 9777685 358230 15954 80794
---------------- -------- ------- ------------- ------- ------ ------------ ----------
Done. Processed 1 files, 0 programs. Skipped 1 files, 0 programs.
Further debugging shows the llvm commit [1] is responsible for the verificaiton
failure as it tries to convert certain switch statement to if-condition. Such
change may cause different transformation compared to original switch statement.
In bpf program strobemeta.c case, the initial llvm ir for read_int_var() function is
define internal void @read_int_var(ptr noundef %0, i64 noundef %1, ptr noundef %2,
ptr noundef %3, ptr noundef %4) #2 !dbg !535 {
%6 = alloca ptr, align 8
%7 = alloca i64, align 8
%8 = alloca ptr, align 8
%9 = alloca ptr, align 8
%10 = alloca ptr, align 8
%11 = alloca ptr, align 8
%12 = alloca i32, align 4
...
%20 = icmp ne ptr %19, null, !dbg !561
br i1 %20, label %22, label %21, !dbg !562
21: ; preds = %5
store i32 1, ptr %12, align 4
br label %48, !dbg !563
22:
%23 = load ptr, ptr %9, align 8, !dbg !564
...
47: ; preds = %38, %22
store i32 0, ptr %12, align 4, !dbg !588
br label %48, !dbg !588
48: ; preds = %47, %21
call void @llvm.lifetime.end.p0(ptr %11) #4, !dbg !588
%49 = load i32, ptr %12, align 4
switch i32 %49, label %51 [
i32 0, label %50
i32 1, label %50
]
50: ; preds = %48, %48
ret void, !dbg !589
51: ; preds = %48
unreachable
}
Note that the above 'switch' statement is added by clang frontend.
Without [1], the switch statement will survive until SelectionDag,
so the switch statement acts like a 'barrier' and prevents some
transformation involved with both 'before' and 'after' the switch statement.
But with [1], the switch statement will be removed during middle end
optimization and later middle end passes (esp. after inlining) have more
freedom to reorder the code.
The following is the related source code:
static void *calc_location(struct strobe_value_loc *loc, void *tls_base):
bpf_probe_read_user(&tls_ptr, sizeof(void *), dtv);
/* if pointer has (void *)-1 value, then TLS wasn't initialized yet */
return tls_ptr && tls_ptr != (void *)-1
? tls_ptr + tls_index.offset
: NULL;
In read_int_var() func, we have:
void *location = calc_location(&cfg->int_locs[idx], tls_base);
if (!location)
return;
bpf_probe_read_user(value, sizeof(struct strobe_value_generic), location);
...
The static func calc_location() is called inside read_int_var(). The asm code
without [1]:
77: .123....89 (85) call bpf_probe_read_user#112
78: ........89 (79) r1 = *(u64 *)(r10 -368)
79: .1......89 (79) r2 = *(u64 *)(r10 -8)
80: .12.....89 (bf) r3 = r2
81: .123....89 (0f) r3 += r1
82: ..23....89 (07) r2 += 1
83: ..23....89 (79) r4 = *(u64 *)(r10 -464)
84: ..234...89 (a5) if r2 < 0x2 goto pc+13
85: ...34...89 (15) if r3 == 0x0 goto pc+12
86: ...3....89 (bf) r1 = r10
87: .1.3....89 (07) r1 += -400
88: .1.3....89 (b4) w2 = 16
In this case, 'r2 < 0x2' and 'r3 == 0x0' go to null 'locaiton' place,
so the verifier actually prefers to do verification first at 'r1 = r10' etc.
The asm code with [1]:
119: .123....89 (85) call bpf_probe_read_user#112
120: ........89 (79) r1 = *(u64 *)(r10 -368)
121: .1......89 (79) r2 = *(u64 *)(r10 -8)
122: .12.....89 (bf) r3 = r2
123: .123....89 (0f) r3 += r1
124: ..23....89 (07) r2 += -1
125: ..23....89 (a5) if r2 < 0xfffffffe goto pc+6
126: ........89 (05) goto pc+17
...
144: ........89 (b4) w1 = 0
145: .1......89 (6b) *(u16 *)(r8 +80) = r1
In this case, if 'r2 < 0xfffffffe' is true, the control will go to
non-null 'location' branch, so 'goto pc+17' will actually go to
null 'location' branch. This seems causing tremendous amount of
verificaiton state.
To fix the issue, rewrite the following code
return tls_ptr && tls_ptr != (void *)-1
? tls_ptr + tls_index.offset
: NULL;
to if/then statement and hopefully these explicit if/then statements
are sticky during middle-end optimizations.
Test with llvm20 and llvm21 as well and all strobemeta related selftests
are passed.
[1] https://github.com/llvm/llvm-project/pull/161000
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251014051639.1996331-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The vma->vm_mm might be NULL and it can be accessed outside of RCU. Thus,
we can mark it as trusted_or_null. With this change, BPF helpers can safely
access vma->vm_mm to retrieve the associated mm_struct from the VMA.
Then we can make policy decision from the VMA.
The "trusted" annotation enables direct access to vma->vm_mm within kfuncs
marked with KF_TRUSTED_ARGS or KF_RCU, such as bpf_task_get_cgroup1() and
bpf_task_under_cgroup(). Conversely, "null" enforcement requires all
callsites using vma->vm_mm to perform NULL checks.
The lsm selftest must be modified because it directly accesses vma->vm_mm
without a NULL pointer check; otherwise it will break due to this
change.
For the VMA based THP policy, the use case is as follows,
@mm = @vma->vm_mm; // vm_area_struct::vm_mm is trusted or null
if (!@mm)
return;
bpf_rcu_read_lock(); // rcu lock must be held to dereference the owner
@owner = @mm->owner; // mm_struct::owner is rcu trusted or null
if (!@owner)
goto out;
@cgroup1 = bpf_task_get_cgroup1(@owner, MEMCG_HIERARCHY_ID);
/* make the decision based on the @cgroup1 attribute */
bpf_cgroup_release(@cgroup1); // release the associated cgroup
out:
bpf_rcu_read_unlock();
PSI memory information can be obtained from the associated cgroup to inform
policy decisions. Since upstream PSI support is currently limited to cgroup
v2, the following example demonstrates cgroup v2 implementation:
@owner = @mm->owner;
if (@owner) {
// @ancestor_cgid is user-configured
@ancestor = bpf_cgroup_from_id(@ancestor_cgid);
if (bpf_task_under_cgroup(@owner, @ancestor)) {
@psi_group = @ancestor->psi;
/* Extract PSI metrics from @psi_group and
* implement policy logic based on the values
*/
}
}
The vma::vm_file can also be marked with __safe_trusted_or_null.
No additional selftests are required since vma->vm_file and vma->vm_mm are
already validated in the existing selftest suite.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20251016063929.13830-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are some set but not used build errors when compiling bpf selftests
with the latest upstream mainline GCC, at the beginning add the attribute
__maybe_unused for the variables, but it is better to just add the option
-Wno-unused-but-set-variable to CFLAGS in Makefile to disable the errors
instead of hacking the tests.
tools/testing/selftests/bpf/map_tests/lpm_trie_map_basic_ops.c:229:36:
error: variable ‘n_matches_after_delete’ set but not used [-Werror=unused-but-set-variable=]
tools/testing/selftests/bpf/map_tests/lpm_trie_map_basic_ops.c:229:25:
error: variable ‘n_matches’ set but not used [-Werror=unused-but-set-variable=]
tools/testing/selftests/bpf/prog_tests/bpf_cookie.c:426:22:
error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
tools/testing/selftests/bpf/prog_tests/find_vma.c:52:22:
error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
tools/testing/selftests/bpf/prog_tests/perf_branches.c:67:22:
error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
tools/testing/selftests/bpf/prog_tests/perf_link.c:15:22:
error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=]
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20251018082815.20622-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for sticky fingers handling in hid-multitouch (Benjamin
Tissoires)
- fix for reporting of 0 battery levels (Dmitry Torokhov)
- build fix for hid-haptic in certain configurations (Jonathan Denose)
- improved probe and avoiding spamming kernel log by hid-nintendo
(Vicki Pfau)
- fix for OOB in hid-cp2112 (Deepak Sharma)
- interrupt handling fix for intel-thc-hid (Even Xu)
- a couple of new device IDs and device-specific quirks
* tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL
selftests/hid: add tests for missing release on the Dell Synaptics
HID: multitouch: fix sticky fingers
HID: multitouch: fix name of Stylus input devices
HID: hid-input: only ignore 0 battery events for digitizers
HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"
HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC
HID: nintendo: Rate limit IMU compensation message
HID: nintendo: Wait longer for initial probe
HID: core: Add printk_ratelimited variants to hid_warn() etc
HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel
HID: quirks: avoid Cooler Master MM712 dongle wakeup bug
HID: cp2112: Add parameter validation to data length
HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's
HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection
HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting
|
|
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-10-16
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Link: https://patch.msgid.link/20251016204539.773707-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The io_uring functions return negative error values, but error() expects
these to be positive to properly match them to an errno string. Fix this
to make sure the correct error descriptions are displayed upon failure.
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251016182538.3790567-1-cmllamas@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the following build error
CLNG-BPF [test_progs] verifier_global_ptr_args.bpf.o
progs/verifier_global_ptr_args.c:228:5: error: redefinition of 'off' as
different kind of symbol
228 | u32 off;
| ^
The symbol 'off' was previously defined in
tools/testing/selftests/bpf/tools/include/vmlinux.h, which includes an
enum i40e_ptp_gpio_pin_state from
drivers/net/ethernet/intel/i40e/i40e_ptp.c:
enum i40e_ptp_gpio_pin_state {
end = -2,
invalid = -1,
off = 0,
in_A = 1,
in_B = 2,
out_A = 3,
out_B = 4,
};
This enum is included when CONFIG_I40E is enabled. As of commit
032676ff8217 ("LoongArch: Update Loongson-3 default config file"),
CONFIG_I40E is set in the defconfig, which leads to the conflict.
Renaming the local variable avoids the redefinition and allows the
build to succeed.
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251017171551.53142-1-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test fails the first time I am running it after a fresh virtme-ng boot.
tcp_user_timeout_user-timeout-probe.pkt:33: runtime error in write call: Expected result -1 but got 24 with errno 2 (No such file or directory)
Tweaks the timings a bit, to reduce flakiness.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soham Chakradeo <sohamch@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test does the following for IPv4/IPv6 x TCP/UDP sockets
with/without sk->sk_bypass_prot_mem, which can be turned on by
net.core.bypass_prot_mem or bpf_setsockopt(SK_BPF_BYPASS_PROT_MEM).
1. Create socket pairs
2. Send NR_PAGES (32) of data (TCP consumes around 35 pages,
and UDP consuems 66 pages due to skb overhead)
3. Read memory_allocated from sk->sk_prot->memory_allocated and
sk->sk_prot->memory_per_cpu_fw_alloc
4. Check if unread data is charged to memory_allocated
If sk->sk_bypass_prot_mem is set, memory_allocated should not be
changed, but we allow a small error (up to 10 pages) in case
other processes on the host use some amounts of TCP/UDP memory.
The amount of allocated pages are buffered to per-cpu variable
{tcp,udp}_memory_per_cpu_fw_alloc up to +/- net.core.mem_pcpu_rsv
before reported to {tcp,udp}_memory_allocated.
At 3., memory_allocated is calculated from the 2 variables at
fentry of socket create function.
We drain the receive queue only for UDP before close() because UDP
recv queue is destroyed after RCU grace period. When I printed
memory_allocated, UDP bypass cases sometimes saw the no-bypass
case's leftover, but it's still in the small error range (<10 pages).
bpf_trace_printk: memory_allocated: 0 <-- TCP no-bypass
bpf_trace_printk: memory_allocated: 35
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ sysctl
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- TCP w/ bpf
bpf_trace_printk: memory_allocated: 0
bpf_trace_printk: memory_allocated: 0 <-- UDP no-bypass
bpf_trace_printk: memory_allocated: 66
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ sysctl (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
bpf_trace_printk: memory_allocated: 2 <-- UDP w/ bpf (2 pages leftover)
bpf_trace_printk: memory_allocated: 2
We prefer finishing tests faster than oversleeping for call_rcu()
+ sk_destruct().
The test completes within 2s on QEMU (64 CPUs) w/ KVM.
# time ./test_progs -t sk_bypass
#371/1 sk_bypass_prot_mem/TCP :OK
#371/2 sk_bypass_prot_mem/UDP :OK
#371/3 sk_bypass_prot_mem/TCPv6:OK
#371/4 sk_bypass_prot_mem/UDPv6:OK
#371 sk_bypass_prot_mem:OK
Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED
real 0m1.481s
user 0m0.181s
sys 0m0.441s
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://patch.msgid.link/20251014235604.3057003-7-kuniyu@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
|
|
We don't have a test triggering a partial splice caused by a full
skmsg. Add one, based on a program by Jann Horn.
Use MAX_FRAGS=48 to make sure the skmsg will be full for any allowed
value of CONFIG_MAX_SKB_FRAGS (17..45).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/1d129a15f526ea3602f3a2b368aa0b6f7e0d35d5.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We don't have a test to check that MSG_MORE won't let us merge records
of different types across sendmsg calls.
Add new tests that check:
- MSG_MORE is only allowed for DATA records
- a pending DATA record gets closed and pushed before a non-DATA
record is processed
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/b34feeadefe8a997f068d5ed5617afd0072df3c0.1760432043.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit adds two tests. The first is the most basic unit test:
make sure an empty queue peeks as empty, and when we put one element
in the queue, make sure peek returns that element.
However, even this simple test is a little complicated by the different
behavior of scx_bpf_dsq_insert in different calling contexts:
- insert is for direct dispatch in enqueue
- insert is delayed when called from select_cpu
In this case we split the insert and the peek that verifies the
result between enqueue/dispatch.
Note: An alternative would be to call `scx_bpf_dsq_move_to_local` on an
empty queue, which in turn calls `flush_dispatch_buf`, in order to flush
the buffered insert. Unfortunately, this is not viable within the
enqueue path, as it attempts a voluntary context switch within an RCU
read-side critical section.
The second test is a stress test that performs many peeks on all DSQs
and records the observed tasks.
Signed-off-by: Ryan Newton <newton@meta.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Convert test_cpu to use the newly added values_close_report() helper
to print detailed diagnostics when a tolerance check fails. This
provides clearer insight into deviations while run in the CI.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some cgroup selftests, such as test_cpu, occasionally fail by a very
small margin and if run in the CI context, it is useful to have detailed
diagnostic output to understand the deviation.
Introduce a values_close_report() helper which performs the same
comparison as values_close(), but prints detailed information when the
values differ beyond the allowed tolerance.
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since v4.1 kernel, a new interface for ftrace called "tracefs" was
introduced, which is usually mounted in /sys/kernel/tracing. Therefore,
tracing files can now be accessed via either the legacy path
/sys/kernel/debug/tracing or the newer path /sys/kernel/tracing.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dce8 ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The userspace-visible encoding for CNTV_CVAL_EL0 and CNTVCNT_EL0
have been swapped for as long as usersapce has had access to the
registers. This is documented in arch/arm64/include/uapi/asm/kvm.h.
Despite that, the get_reg_list test has unhelpful comments indicating
the wrong register for the encoding.
Replace this with definitions exposed in the include file, and
a comment explaining again the brokenness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add yet another configuration, this time dealing E2H=0.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp virtual timer registers only exist when VHE is present,
Similarly, VNCR_EL2 only exists when NV2 is present.
Make these dependencies explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_lpi_stress rather hilariously leaves IRQs disabled for the duration
of the test. While the ITS translation of MSIs happens regardless of
this, for completeness the guest should actually handle the LPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vcpus array contains pointers to struct kvm_vcpu {}. It is way overkill
to allocate the array with (nr_cpus * sizeof(struct kvm_vcpu)). Fix the
allocation by using the correct size.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We forgot to sync several registers (ID_AA64PFR1, MPIDR, CLIDR) in guest to
make sure that the guest had seen the written value.
Add them to the list.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-By: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c402a ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Store the width of arm64's timer counter as an "int", not a "uint64_t".
ilog2() returns an "int", and more importantly using what is an "unsigned
long" under the hood makes clang unhappy due to a type mismatch when
clamping the width to a sane value.
arm64/arch_timer_edge_cases.c:1032:10: error: comparison of distinct pointer types
('typeof (width) *' (aka 'unsigned long *') and 'typeof (56) *' (aka 'int *'))
[-Werror,-Wcompare-distinct-pointer-types]
1032 | width = clamp(width, 56, 64);
| ^~~~~~~~~~~~~~~~~~~~
tools/include/linux/kernel.h:47:45: note: expanded from macro 'clamp'
47 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~~~~~~~~~~
tools/include/linux/kernel.h:33:17: note: expanded from macro 'max'
33 | (void) (&_max1 == &_max2); \
| ~~~~~~ ^ ~~~~~~
tools/include/linux/kernel.h:39:9: note: expanded from macro 'min'
39 | typeof(x) _min1 = (x); \
| ^
Fixes: fad4cf944839 ("KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases")
Cc: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A defect against the architecture now allows an implementation to treat
AMO as 1 when HCR_EL2.{E2H, TGE} = {1, 0}. KVM now takes advantage of
this interpretation to address a quality of emulation issue w.r.t.
SError injection.
Add a corresponding test case and expect a pending SError to be taken.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Convert remaining __init__ files similar to what we did in
commit b615879dbfea ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
|
Expand the guest_memfd negative testcases for overflow and MAP_PRIVATE to
verify that reads to inaccessible memory also get a SIGBUS.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a guest_memfd testcase to verify that faulting in private memory gets
a SIGBUS. For now, test only the case where memory is private by default
since KVM doesn't yet support in-place conversion.
Deliberately run the CoW test with and without INIT_SHARED set as KVM
should disallow MAP_PRIVATE regardless of whether the memory itself is
private from a CoCo perspective.
Cc: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guest_memfd test's SIGBUS handling functionality into a common
TEST_EXPECT_SIGBUS() macro in anticipation of adding more SIGBUS testcases.
Eating a SIGBUS isn't terrible difficult, but it requires a non-trivial
amount of boilerplate code, and using a macro allows selftests to print
out the exact action that failed to generate a SIGBUS without the developer
needing to remember to add a useful error message.
Explicitly mark the SIGBUS handler as "used", as gcc-14 at least likes to
discard the function before linking.
Opportunistically use TEST_FAIL(...) instead of TEST_ASSERT(false, ...),
and fix the write path of the guest_memfd test to use the local "val"
instead of hardcoding the literal value a second time.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the guest_memfd Copy-on-Write (CoW) testcase to its own function to
better separate positive testcases from negative testcases.
No functional change intended.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add and use wrappers for mmap() and munmap() that assert success to reduce
a significant amount of boilerplate code, to ensure all tests assert on
failure, and to provide consistent error messages on failure.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If a VM type supports KVM_CAP_GUEST_MEMFD_MMAP, the guest_memfd test will
run all test cases with GUEST_MEMFD_FLAG_MMAP set. This leaves the code
path for creating a non-mmap()-able guest_memfd on a VM that supports
mappable guest memfds untested.
Refactor the test to run the main test suite with a given set of flags.
Then, for VM types that support the mappable capability, invoke the test
suite twice: once with no flags, and once with GUEST_MEMFD_FLAG_MMAP
set.
This ensures both creation paths are properly exercised on capable VMs.
Run test_guest_memfd_flags() only once per VM type since it depends only
on the set of valid/supported flags, i.e. iterating over an arbitrary set
of flags is both unnecessary and wrong.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: use double-underscores for the inner helper]
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor the guest_memfd selftest to improve test isolation by creating a
a new guest_memfd for each testcase. Currently, the test reuses a single
guest_memfd instance for all testcases, and thus creates dependencies
between tests, e.g. not truncating folios from the guest_memfd instance
at the end of a test could lead to unexpected results (see the PUNCH_HOLE
purging that needs to done by in-flight the NUMA testcases[1]).
Invoke each test via a macro wrapper to create and close a guest_memfd
to cut down on the boilerplate copy+paste needed to create a test.
Link: https://lore.kernel.org/all/20250827175247.83322-10-shivankg@amd.com
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a global variable to track the host page size in the guest_memfd test
so that the information doesn't need to be constantly passed around. The
state is purely a reflection of the underlying system, i.e. can't be set
by the test and is constant for a given invocation of the test, and thus
explicitly passing the host page size to individual testcases adds no
value, e.g. doesn't allow testing different combinations.
Making page_size a global will simplify an upcoming change to create a new
guest_memfd instance per testcase.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
