summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2018-11-21powerpc/selftests: Wait all threads to joinBreno Leitao
[ Upstream commit 693b31b2fc1636f0aa7af53136d3b49f6ad9ff39 ] Test tm-tmspr might exit before all threads stop executing, because it just waits for the very last thread to join before proceeding/exiting. This patch makes sure that all threads that were created will join before proceeding/exiting. This patch also guarantees that the amount of threads being created is equal to thread_num. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13selftests/powerpc: Fix ptrace tm failureBreno Leitao
commit 48dc0ef19044bfb69193302fbe3a834e3331b7ae upstream. Test ptrace-tm-spd-gpr fails on current kernel (4.19) due to a segmentation fault that happens on the child process prior to setting cptr[2] = 1. This causes the parent process to wait forever at 'while (!pptr[2])' and the test to be killed by the test harness framework by timeout, thus, failing. The segmentation fault happens because of a inline assembly being generated as: 0x10000355c <tm_spd_gpr+492> lfs f0, 0(0) This is reading memory position 0x0 and causing the segmentation fault. This code is being generated by ASM_LOAD_FPR_SINGLE_PRECISION(flt_4), where flt_4 is passed to the inline assembly block as: [flt_4] "r" (&d) Since the inline assembly 'r' constraint means any GPR, gpr0 is being chosen, thus causing this issue when issuing a Load Floating-Point Single instruction. This patch simply changes the constraint to 'b', which specify that this register will be used as base, and r0 is not allowed to be used, avoiding this issue. Other than that, removing flt_2 register from the input operands, since it is not used by the inline assembly code at all. Cc: stable@vger.kernel.org Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13selftests/ftrace: Fix synthetic event test to delete event correctlyMasami Hiramatsu
commit 0d0352d8b3d6d7ca9a710b40e194cbbaeb841c88 upstream. Fix the synthetic event test case to remove event correctly. If redirecting command to synthetic_event file without append mode, it cleans up all existing events and execute (parse) the command. This means "delete event" always fails to find the target event. Since previous synthetic event has a bug which doesn't return -ENOENT even if it fails to find the deleting event, this test passed. But fixing that bug, this test fails because this test itself has a bug. This fixes that bug by trying to delete event right after adding an event, and use append mode redirection ('>>') instead of normal redirection ('>'). Link: http://lkml.kernel.org/r/154013452832.25576.2305459545429386517.stgit@devbox Acked-by: Shuah Khan <shuah@kernel.org> Acked-by: Tom Zanussi <zanussi@linux.intel.com> Tested-by: Tom Zanussi <zanussi@linux.intel.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: stable@vger.kernel.org Fixes: f06eec4d0f2c ('selftests: ftrace: Add inter-event hist triggers testcases') Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13selftests: ftrace: Add synthetic event syntax testcaseMasami Hiramatsu
[ Upstream commit ba0e41ca81b935b958006c7120466e2217357827 ] Add a testcase to check the syntax and field types for synthetic_events interface. Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13selftests: usbip: add wait after attach and before checking port statusShuah Khan (Samsung OSG)
[ Upstream commit 4b0aaacee51eb6592a03fdefd5ce97558518e291 ] Add sleep between attach and "usbip port" check to make sure status is updated. Running attach and query back shows incorrect status. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13bpf: do not blindly change rlimit in reuseport net selftestEric Dumazet
[ Upstream commit 262f9d811c7608f1e74258ceecfe1fa213bdf912 ] If the current process has unlimited RLIMIT_MEMLOCK, we should should leave it as is. Fixes: 941ff6f11c02 ("bpf: fix rlimit in reuseport net selftest") Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04net/ipv6: Allow onlink routes to have a device mismatch if it is the default ↵David Ahern
route [ Upstream commit 4ed591c8ab44e711e56b8e021ffaf4f407c045f5 ] The intent of ip6_route_check_nh_onlink is to make sure the gateway given for an onlink route is not actually on a connected route for a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway lookup hits the default route then it most likely will be a different interface than the onlink route which is ok. Update ip6_route_check_nh_onlink to disregard the device mismatch if the gateway lookup hits the default route. Turns out the existing onlink tests are passing because there is no default route or it is an unreachable default, so update the onlink tests to have a default route other than unreachable. Fixes: fc1e64e1092f6 ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04selftests: udpgso_bench.sh explicitly requires bashPaolo Abeni
[ Upstream commit 12a2ea962c06efb30764c47b140d2ec9d3cd7cb0 ] The udpgso_bench.sh script requires several bash-only features. This may cause random failures if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter Fixes: 3a687bef148d ("selftests: udp gso benchmark") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-04selftests: rtnetlink.sh explicitly requires bash.Paolo Abeni
[ Upstream commit 3c718e677c2b35b449992adc36ecce883c467e98 ] the script rtnetlink.sh requires a bash-only features (sleep with sub-second precision). This may cause random test failure if the default shell is not bash. Address the above explicitly requiring bash as the script interpreter. Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-20bpf: test_maps, only support ESTABLISHED socksJohn Fastabend
[ Upstream commit 5028027844cfc6168e39650abecd817ba64c9d98 ] Ensure that sockets added to a sock{map|hash} that is not in the ESTABLISHED state is rejected. Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-20selftests: pmtu: properly redirect stderr to /dev/nullSabrina Dubroca
[ Upstream commit 0a286afee5a1e8dca86d824209dbd3200294f86f ] The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually send stderr to /dev/null, so when the netns doesn't exist, the error message is shown. Use "2> /dev/null" instead, so that those messages disappear, as was intended. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18Fix cg_read_strcmp()Jay Kamat
[ Upstream commit 48c2bb0b9cf863e0ed78e269f188ce65b73e0fd1 ] Fix a couple issues with cg_read_strcmp(), to improve correctness of cgroup tests - Fix cg_read_strcmp() always returning 0 for empty "needle" strings. Previously, this function read to a size = 1 buffer when comparing against empty strings, which would lead to cg_read_strcmp() comparing two empty strings. - Fix a memory leak in cg_read_strcmp() Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests") Signed-off-by: Jay Kamat <jgkamat@fb.com> Acked-by: Roman Gushchin <guro@fb.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18selftests: memory-hotplug: add required configsLei Yang
[ Upstream commit 4d85af102a66ee6aeefa596f273169e77fb2b48e ] add CONFIG_MEMORY_HOTREMOVE=y in config without this config, /sys/devices/system/memory/memory*/removable always return 0, I endup getting an early skip during test Signed-off-by: Lei Yang <Lei.Yang@windriver.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18selftests/efivarfs: add required kernel configsLei Yang
[ Upstream commit 53cf59d6c0ad3edc4f4449098706a8f8986258b6 ] add config file Signed-off-by: Lei Yang <Lei.Yang@windriver.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18selftests: add headers_install to lib.mkAnders Roxell
[ Upstream commit b2d35fa5fc80c27e868e393dcab4c94a0d71737f ] If the kernel headers aren't installed we can't build all the tests. Add a new make target rule 'khdr' in the file lib.mk to generate the kernel headers and that gets include for every test-dir Makefile that includes lib.mk If the testdir in turn have its own sub-dirs the top_srcdir needs to be set to the linux-rootdir to be able to generate the kernel headers. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18selftests: kselftest: Remove outdated commentThiago Jung Bauermann
[ Upstream commit c31d02d1290e1e82a08015199e408228e152991f ] Commit 3c07aaef6598 ("selftests: kselftest: change KSFT_SKIP=4 instead of KSFT_PASS") reverted commit 11867a77eb85 ("selftests: kselftest framework: change skip exit code to 0") but missed removing the comment which that commit added, so do that now. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18selftests: android: move config up a levelAnders Roxell
[ Upstream commit 88bc243a3f22b9938c0b53c577dee28025cdb920 ] 'make kselftest-merge' assumes that the config files for the tests are located under the 'main' test dir, like tools/testing/selftests/android/ and not in a subdir to android. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13x86/vdso: Fix vDSO syscall fallback asm constraint regressionAndy Lutomirski
commit 02e425668f5c9deb42787d10001a3b605993ad15 upstream. When I added the missing memory outputs, I failed to update the index of the first argument (ebx) on 32-bit builds, which broke the fallbacks. Somehow I must have screwed up my testing or gotten lucky. Add another test to cover gettimeofday() as well. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13selftests/x86: Add clock_gettime() tests to test_vdsoAndy Lutomirski
commit 7c03e7035ac1cf2a6165754e4f3a49c2f1977838 upstream. Now that the vDSO implementation of clock_gettime() is getting reworked, add a selftest for it. This tests that its output is consistent with the syscall version. This is marked for stable to serve as a test for commit 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/082399674de2619b2befd8c0dde49b260605b126.1538422295.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10selftests: pmtu: detect correct binary to ping ipv6 addressesSabrina Dubroca
[ Upstream commit c81c7012e0c769b5704c2b07bd5224965e76fb70 ] Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10selftests: pmtu: maximum MTU for vti4 is 2^16-1-20Sabrina Dubroca
[ Upstream commit 902b5417f28d955cdb4898df6ffaab15f56c5cff ] Since commit 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10tc-testing: add test-cases for numeric and invalid control actionPaolo Abeni
[ Upstream commit 25a8238f4cc8425d4aade4f9041be468d0e8aa2e ] Only the police action allows us to specify an arbitrary numeric value for the control action. This change introduces an explicit test case for the above feature and then leverage it for testing the kernel behavior for invalid control actions (reject). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10rseq/selftests: fix parametrized test with -fpieMathieu Desnoyers
commit ce01a1575f45bf319e374592656441021a7f5823 upstream. On x86-64, the parametrized selftest code for rseq crashes with a segmentation fault when compiled with -fpie. This happens when the param_test binary is loaded at an address beyond 32-bit on x86-64. The issue is caused by use of a 32-bit register to hold the address of the loop counter variable. Fix this by using a 64-bit register to calculate the address of the loop counter variables as an offset from rip. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # v4.18 Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03selftests: forwarding: Tweak tc filters for mirror-to-gretap testsPetr Machata
[ Upstream commit ec9fdc99f5a6a2cfe4061e807fcb0cc1129f0a2d ] When running mirror_gre_bridge_1d_vlan tests on veth, several issues cause spurious failures: - vlan_ethtype should be ip, not ipv6 even in mirror-to-ip6gretap case, because the overlay packet is still IPv4. - Similarly ip_proto matches the innermost IP protocol, so can't be used to filter out GRE packet. Drop the corresponding condition. - Because the above fixes the filters to match in slow path as well, they need to be made skip_hw so as not to double-count packets. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock ↵John Stultz
adjustments are in progress [ Upstream commit 1416270f4a1ae83ea84156ceba19a66a8f88be1f ] In the past we've warned when ADJ_OFFSET was in progress, usually caused by ntpd or some other time adjusting daemon running in non steady sate, which can cause the skew calculations to be incorrect. Thus, this patch checks to see if the clock was being adjusted when we fail so that we don't cause false negatives. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Suggested-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26selftests/android: initialize heap_type to avoid compiling warningLi Zhijian
[ Upstream commit cc7c673032fc7427087e74b75f732b43db38a256 ] Initialize heap_type to ION_HEAP_TYPE_SYSTEM to avoid "used uninitialized" compiler warning. heap_type gets used after initialization, this change is to just keep the compiler happy. root@vm-lkp-nex04-8G-7 ~/linux-v4.18-rc2/tools/testing/selftests/android# make make[1]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule. make[1]: Entering directory '/root/linux-v4.18-rc2/tools/testing/selftests/android/ion' gcc -I. -I../../../../../drivers/staging/android/uapi/ -I../../../../../usr/include/ -Wall -O2 -g ionapp_export.c ipcsocket.c ionutils.c -o ionapp_export ionapp_export.c: In function 'main': ionapp_export.c:91:2: warning: 'heap_type' may be used uninitialized in this function [-Wmaybe-uninitialized] printf("heap_type: %ld, heap_size: %ld\n", heap_type, heap_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC: Shuah Khan <shuah@kernel.org> CC: Pintu Agarwal <pintu.ping@gmail.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26selftests: vDSO - fix to return KSFT_SKIP when test couldn't be runShuah Khan (Samsung OSG)
[ Upstream commit d2d49495b5c0dffee5c4da5ea12ac0da6679bd08 ] Fix to return KSFT_SKIP when test couldn't be run because AT_SYSINFO_EHDR isn't found and gettimeofday isn't defined. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26tools/testing/nvdimm: Fix support for emulating controller temperatureDan Williams
[ Upstream commit e5d772fbe7685aae0dff99f3b54158a0ec32155e ] In addition to populating the value the payload also needs to set the "controller temperature valid" flag. Fixes: cdd77d3e1930 ("nfit, libnvdimm: deprecate the generic SMART ioctl") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()Huaisheng Ye
[ Upstream commit 45df5d3dc0c7289c1e67afe6d2ba806ad5174314 ] The mock / test version of pmem_direct_access() needs to check the validity of pointers kaddr and pfn for NULL assignment. If anyone equals to NULL, it doesn't need to calculate the value. If pointer equals to NULL, that is to say callers may have no need for kaddr or pfn, so this patch is prepared for allowing them to pass in NULL instead of having to pass in a local pointer or variable that they then just throw away. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19selftests/bpf: fix a typo in map in map testRoman Gushchin
[ Upstream commit 0069fb854364da79fd99236ea620affc8e1152d5 ] Commit fbeb1603bf4e ("bpf: verifier: MOV64 don't mark dst reg unbounded") revealed a typo in commit fb30d4b71214 ("bpf: Add tests for map-in-map"): BPF_MOV64_REG(BPF_REG_0, 0) was used instead of BPF_MOV64_IMM(BPF_REG_0, 0). I've noticed the problem by running bpf kselftests. Fixes: fb30d4b71214 ("bpf: Add tests for map-in-map") Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Arthur Fabre <afabre@cloudflare.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19tc-testing: remove duplicate spaces in connmark match patternsVlad Buslov
[ Upstream commit 757a9a39d483ae415a712388c33d4042a98b751f ] Match patterns for some connmark tests contain duplicate whitespace that is not present in actual tc output. This causes tests to fail because they can't match required action, even when it was successfully created. Fixes: 1dad0f9ffff7 ("tc-testing: add connmark action tests") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19tc-testing: flush gact actions on test teardownVlad Buslov
[ Upstream commit 0c62f8a820b7fdeacf5ad9f9e24b53043d372c97 ] Test 6fb4 creates one mirred and one pipe action, but only flushes mirred on teardown. Leaking pipe action causes failures in other tests. Add additional teardown command to also flush gact actions. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15selftests/powerpc: Kill child processes on SIGINTBreno Leitao
[ Upstream commit 7c27a26e1ed5a7dd709aa19685d2c98f64e1cf0c ] There are some powerpc selftests, as tm/tm-unavailable, that run for a long period (>120 seconds), and if it is interrupted, as pressing CRTL-C (SIGINT), the foreground process (harness) dies but the child process and threads continue to execute (with PPID = 1 now) in background. In this case, you'd think the whole test exited, but there are remaining threads and processes being executed in background. Sometimes these zombies processes are doing annoying things, as consuming the whole CPU or dumping things to STDOUT. This patch fixes this problem by attaching an empty signal handler to SIGINT in the harness process. This handler will interrupt (EINTR) the parent process waitpid() call, letting the code to follow through the normal flow, which will kill all the processes in the child process group. This patch also fixes a typo. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-08bpf, sockmap: fix cork timeout for select due to epipeDaniel Borkmann
I ran into the same issue as a009f1f396d0 ("selftests/bpf: test_sockmap, timing improvements") where I had a broken pipe error on the socket due to remote end timing out on select and then shutting down it's sockets while the other side was still sending. We may need to do a bigger rework in general on the test_sockmap.c, but for now increase it to a more suitable timeout. Fixes: a18fda1a62c3 ("bpf: reduce runtime of test_sockmap tests") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix bpftool percpu_array dump by using correct roundup to next multiple of 8 for the value size, from Yonghong. 2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to allocator since driver will recycle frame anyway in case of an error, from Jakub. 3) Fix up BPF test_lwt_seg6local test cases to final iproute2 syntax, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03selftests/bpf: update test_lwt_seg6local.sh according to iproute2Mathieu Xhonneux
The shell file for test_lwt_seg6local contains an early iproute2 syntax for installing a seg6local End.BPF route. iproute2 support for this feature has recently been upstreamed, but with an additional keyword required. This patch updates test_lwt_seg6local.sh to the definitive iproute2 syntax Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-02selftest/net: fix protocol family to work for IPv4.Maninder Singh
use actual protocol family passed by user rather than hardcoded AF_INTE6 to cerate sockets. current code is not working for IPv4. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several smallish fixes, I don't think any of this requires another -rc but I'll leave that up to you: 1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric Dumazet. 2) Route leak in xfrm_lookup_route(), from Tommi Rantala. 3) Premature poll() returns in AF_XDP, from Björn Töpel. 4) devlink leak in netdevsim, from Jakub Kicinski. 5) Don't BUG_ON in fib_compute_spec_dst, the condition can legitimately happen. From Lorenzo Bianconi. 6) Fix some spectre v1 gadgets in generic socket code, from Jeremy Cline. 7) Don't allow user to bind to out of range multicast groups, from Dmitry Safonov with a follow-up by Dmitry Safonov. 8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) netlink: Don't shift with UB on nlk->ngroups net/ipv6: fix metrics leak xen-netfront: wait xenbus state change when load module manually can: ems_usb: Fix memory leak on ems_usb_disconnect() openvswitch: meter: Fix setting meter id for new entries netlink: Do not subscribe to non-existent groups NET: stmmac: align DMA stuff to largest cache line length tcp_bbr: fix bw probing to raise in-flight data for very small BDPs net: socket: Fix potential spectre v1 gadget in sock_is_registered net: socket: fix potential spectre v1 gadget in socketcall net: mdio-mux: bcm-iproc: fix wrong getter and setter pair ipv4: remove BUG_ON() from fib_compute_spec_dst enic: handle mtu change for vf properly net: lan78xx: fix rx handling before first packet is send nfp: flower: fix port metadata conversion bug bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog() bpf: fix bpf_skb_load_bytes_relative pkt length check perf build: Build error in libbpf missing initialization net: ena: Fix use of uninitialized DMA address bits field bpf: btf: Use exact btf value_size match in map_check_btf() ...
2018-07-27Merge tag 'trace-v4.18-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Various fixes to the tracing infrastructure: - Fix double free when the reg() call fails in event_trigger_callback() - Fix anomoly of snapshot causing tracing_on flag to change - Add selftest to test snapshot and tracing_on affecting each other - Fix setting of tracepoint flag on error that prevents probes from being deleted. - Fix another possible double free that is similar to event_trigger_callback() - Quiet a gcc warning of a false positive unused variable - Fix crash of partial exposed task->comm to trace events" * tag 'trace-v4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kthread, tracing: Don't expose half-written comm when creating kthreads tracing: Quiet gcc warning about maybe unused link variable tracing: Fix possible double free in event_enable_trigger_func() tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure selftests/ftrace: Add snapshot and tracing_on test case ring_buffer: tracing: Inherit the tracing setting to next ring buffer tracing: Fix double free of event_trigger_data
2018-07-27bpf: btf: Use exact btf value_size match in map_check_btf()Martin KaFai Lau
The current map_check_btf() in BPF_MAP_TYPE_ARRAY rejects '> map->value_size' to ensure map_seq_show_elem() will not access things beyond an array element. Yonghong suggested that using '!=' is a more correct check. The 8 bytes round_up on value_size is stored in array->elem_size. Hence, using '!=' on map->value_size is a proper check. This patch also adds new tests to check the btf array key type and value type. Two of these new tests verify the btf's value_size (the change in this patch). It also fixes two existing tests that wrongly encoded a btf's type size (pprint_test) and the value_type_id (in one of the raw_tests[]). However, that do not affect these two BTF verification tests before or after this test changes. These two tests mainly failed at array creation time after this patch. Fixes: a26ca7c982cb ("bpf: btf: Add pretty print support to the basic arraymap") Suggested-by: Yonghong Song <yhs@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-25selftests/ftrace: Add snapshot and tracing_on test caseMasami Hiramatsu
Add a testcase for checking snapshot and tracing_on relationship. This ensures that the snapshotting doesn't affect current tracing on/off settings. Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25bpf: Introduce BPF_ANNOTATE_KV_PAIRMartin KaFai Lau
This patch introduces BPF_ANNOTATE_KV_PAIR to signal the bpf loader about the btf key_type and value_type of a bpf map. Please refer to the changes in test_btf_haskv.c for its usage. Both iproute2 and libbpf loader will then have the same convention to find out the map's btf_key_type_id and btf_value_type_id from a map's name. Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-24bpf: btf: Ensure the member->offset is in the right orderMartin KaFai Lau
This patch ensures the member->offset of a struct is in the correct order (i.e the later member's offset cannot go backward). The current "pahole -J" BTF encoder does not generate something like this. However, checking this can ensure future encoder will not violate this. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-20bpf: Use option "help" in the llvm-objcopy testMartin KaFai Lau
I noticed the "--version" option of the llvm-objcopy command has recently disappeared from the master llvm branch. It is currently used as a BTF support test in tools/testing/selftests/bpf/Makefile. This patch replaces it with "--help" which should be less error prone in the future. Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-19bpf: test case to check whether src/dst regs got mangled by xaddDaniel Borkmann
We currently do not have such a test case in test_verifier selftests but it's important to test under bpf_jit_enable=1 to make sure JIT implementations do not mistakenly mess with src/dst reg for xadd/{w,dw}. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of fixes, here goes: 1) NULL deref in qtnfmac, from Gustavo A. R. Silva. 2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih. 3) Lost completion messages in AF_XDP, from Magnus Karlsson. 4) Correct bogus self-assignment in rhashtable, from Rishabh Bhatnagar. 5) Fix regression in ipv6 route append handling, from David Ahern. 6) Fix masking in __set_phy_supported(), from Heiner Kallweit. 7) Missing module owner set in x_tables icmp, from Florian Westphal. 8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire. 9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy. 10) Fix NULL deref when using chains in act_csum, from Davide Caratti. 11) XDP_REDIRECT needs to check if the interface is up and whether the MTU is sufficient. From Toshiaki Makita. 12) Net diag can do a double free when killing TCP_NEW_SYN_RECV connections, from Lorenzo Colitti. 13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a full minute, delaying device unregister. From Eric Dumazet. 14) Update MAC entries in the correct order in ixgbe, from Alexander Duyck. 15) Don't leave partial mangles bpf program in jit_subprogs, from Daniel Borkmann. 16) Fix pfmemalloc SKB state propagation, from Stefano Brivio. 17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng. 18) Use after free in tun XDP_TX, from Toshiaki Makita. 19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole. 20) Don't reuse remainder of RX page when XDP is set in mlx4, from Saeed Mahameed. 21) Fix window probe handling of TCP rapair sockets, from Stefan Baranoff. 22) Missing socket locking in smc_ioctl(), from Ursula Braun. 23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann. 24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva. 25) Two spots in ipv6 do a rol32() on a hash value but ignore the result. Fixes from Colin Ian King" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits) tcp: identify cryptic messages as TCP seq # bugs ptp: fix missing break in switch hv_netvsc: Fix napi reschedule while receive completion is busy MAINTAINERS: Drop inactive Vitaly Bordug's email net: cavium: Add fine-granular dependencies on PCI net: qca_spi: Fix log level if probe fails net: qca_spi: Make sure the QCA7000 reset is triggered net: qca_spi: Avoid packet drop during initial sync ipv6: fix useless rol32 call on hash ipv6: sr: fix useless rol32 call on hash net: sched: Using NULL instead of plain integer net: usb: asix: replace mii_nway_restart in resume path net: cxgb3_main: fix potential Spectre v1 lib/rhashtable: consider param->min_size when setting initial table size net/smc: reset recv timeout after clc handshake net/smc: add error handling for get_user() net/smc: optimize consumer cursor updates net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. ipv6: ila: select CONFIG_DST_CACHE net: usb: rtl8150: demote allmulti message to dev_dbg() ...
2018-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-13 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix AF_XDP TX error reporting before final kernel release such that it becomes consistent between copy mode and zero-copy, from Magnus. 2) Fix three different syzkaller reported issues: oob due to ld_abs rewrite with too large offset, another oob in l3 based skb test run and a bug leaving mangled prog in subprog JITing error path, from Daniel. 3) Fix BTF handling for bitfield extraction on big endian, from Okash. 4) Fix a missing linux/errno.h include in cgroup/BPF found by kbuild bot, from Roman. 5) Fix xdp2skb_meta.sh sample by using just command names instead of absolute paths for tc and ip and allow them to be redefined, from Taeung. 6) Fix availability probing for BPF seg6 helpers before final kernel ships so they can be detected at prog load time, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rseq fixes from Ingo Molnar: "Various rseq ABI fixes and cleanups: use get_user()/put_user(), validate parameters and use proper uapi types, etc" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq: Remove unused types_32_64.h uapi header rseq: uapi: Declare rseq_cs field as union, update includes rseq: uapi: Update uapi comments rseq: Use get_user/put_user rather than __get_user/__put_user rseq: Use __u64 for rseq_cs fields, validate user inputs
2018-07-13Merge tag 'libnvdimm-fixes-4.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dave Jiang: - ensure that a variable passed in by reference to acpi_nfit_ctl is always set to a value. An incremental patch is provided due to notice from testing in -next. The rest of the commits did not exhibit issues. - fix a return path in nsio_rw_bytes() that was not returning "bytes remain" as expected for the function. - address an issue where applications polling on scrub-completion for the NVDIMM may falsely wakeup and read the wrong state value and cause hang. - change the test unit persistent capability attribute to fix up a broken assumption in the unit test infrastructure wrt the 'write_cache' attribute - ratelimit dev_info() in the dax device check_vma() function since this is easily triggered from userspace * tag 'libnvdimm-fixes-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: fix unchecked dereference in acpi_nfit_ctl acpi, nfit: Fix scrub idle detection tools/testing/nvdimm: advertise a write cache for nfit_test acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value dev-dax: check_vma: ratelimit dev_info-s libnvdimm, pmem: Fix memcpy_mcsafe() return code handling in nsio_rw_bytes()
2018-07-12selftests: in udpgso_bench do not test udp zerocopyWillem de Bruijn
The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2026-09-01 12:49:18 +0000