| Age | Commit message (Collapse) | Author |
|---|
|
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This script sets net.ipv4.tcp_rto_max_ms to 1000 and checks
if SYN+ACK RTO is capped at 1s for TFO and non-TFO.
Without the previous patch, the max RTO is applied to TFO
SYN+ACK only, and non-TFO SYN+ACK RTO increases exponentially.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.091936 sec but happened at 6.107826 sec; tolerance 0.127974 sec
# script packet: 5.091936 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.107826 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 1 ipv4
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.075901 sec but happened at 6.091841 sec; tolerance 0.127976 sec
# script packet: 5.075901 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.091841 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 2 ipv6
# # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
not ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt # exit=1
With the previous patch, all SYN+ACKs are retransmitted
after 1s.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# ok 1 ipv4
# ok 2 ipv6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Syzkaller found a case where maths overflows can cause divide by 0
- Typo in a compiler bug warning fix in the selftests broke the
selftests
- type1 compatability had a mismatch when unmapping an already unmapped
range, it should succeed
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Make vfio_compat's unmap succeed if the range is already empty
iommufd/selftest: Fix ioctl return value in _test_cmd_trigger_vevents()
iommufd: Don't overflow during division for dirty tracking
|
|
The zt-test output is awkward to read, as the 'Expected' value isn't
dumped on its own line and isn't aligned with the 'Got' value beneath.
For example:
Mismatch: PID=5281, iteration=3270249 Expected [00a1146901a1146902a1146903a1146904a1146905a1146906a1146907a1146908a1146909a114690aa114690ba114690ca114690da114690ea114690fa11469]
Got [00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000]
SVCR: 2
Add a newline, matching the other FPSIMD/SVE/SME tests, so that we get
output that can be read more easily:
Mismatch: PID=5281, iteration=3270249
Expected [00a1146901a1146902a1146903a1146904a1146905a1146906a1146907a1146908a1146909a114690aa114690ba114690ca114690da114690ea114690fa11469]
Got [00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000]
SVCR: 2
Admittedly this isn't all that important when the 'Got' value is all
zeroes, but otherwise this would be a major help for identifying which
portion of the 'Got' value is not as expected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kselftest@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This commit loosens the kvm.sh script's regular expressions to permit
negative-valued Kconfig options, for example:
--kconfig CONFIG_CMDLINE_LOG_WRAP_IDEAL_LEN=-1
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
tc_tunnel
Now that start_server_str enforces SO_REUSEADDR, there's no need to keep
using start_reusport_server in tc_tunnel, especially since it only uses
one server at a time.
Replace start_reuseport_server with start_server_str in tc_tunnel test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-2-1bbd9c1f8d65@bootlin.com
|
|
Some tests have to stop/start a server multiple time with the same
listening address. Doing so without SO_REUSADDR leads to failures due to
the socket still being in TIME_WAIT right after the first instance
stop/before the second instance start. Instead of letting each test
manually set SO_REUSEADDR on their servers, it can be done automatically
by start_server_addr for all tests (and without any major downside).
Enforce SO_REUSEADDR in start_server_addr for all tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-1-1bbd9c1f8d65@bootlin.com
|
|
Commit 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read
user space") made an update that fixed both trace_marker and
trace_marker_raw. But the small difference made to trace_marker_raw had a
blatant bug in it that any basic testing would have uncovered.
Unfortunately, the self tests have tests for trace_marker but nothing for
trace_marker_raw which allowed the bug to get upstream.
Add basic selftests to test trace_marker_raw so that this doesn't happen
again.
Link: https://lore.kernel.org/r/20251014145149.3e3c1033@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe08b ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phrase "an bool" is grammatically incorrect; it should be
"a bool".
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Link: https://patch.msgid.link/20251106055819.1996-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add C-level selftests for indirect jumps to validate LLVM and libbpf
functionality. The tests are intentionally disabled, to be run
locally by developers, but will not make the CI red.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-13-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a set of tests to validate core gotox functionality
without need to rely on compilers.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-12-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a specific test for instructions arrays with blinding enabled.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-7-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the following selftests for new insn_array map:
* Incorrect instruction indexes are rejected
* Two programs can't use the same map
* BPF progs can't operate the map
* no changes to code => map is the same
* expected changes when instructions are added
* expected changes when instructions are deleted
* expected changes when multiple functions are present
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251105090410.1250500-5-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Adding test that verifies we get expected initial 2 entries from
stacktrace for rawtp probe via ORC unwind.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Adding test that attaches kprobe/kretprobe multi and verifies the
ORC stacktrace matches expected functions.
Adding bpf_testmod_stacktrace_test function to bpf_testmod kernel
module which is called through several functions so we get reliable
call path for stacktrace.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
We now have an RCU_EXPERT config for testing small-sized RCU dynticks
counter: CONFIG_RCU_DYNTICKS_TORTURE.
Modify scenario TREE04 to exercise to use this config in order to test a
ridiculously small counter (2 bits).
Link: http://lore.kernel.org/r/4c2cb573-168f-4806-b1d9-164e8276e66a@paulmck-laptop
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
This commit adds "inplace" and "inplace-force" values to the kvm-again.sh
"--link" argument, which causes the run's output to be placed into the
build directory. This could be used to save build time if the machine
went down partway into a run, but it can also be used to do a large
number of builds, and run the resulting kernels concurrently even if the
builds are based on different commits. A later commit will add this
latter capability to kvm-series.sh in order to produce large speedups
for branch-checking operations.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
This commit adds a kvm-series.sh script that takes a list of scenarios and
a list of commits, and then runs each scenario on all of the commits.
A given scenario is run on all the commits before advancing to the
next scenario to minimize build times. The successes and failures are
summarized at the end of the run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
iommufd returns ENOENT when attempting to unmap a range that is already
empty, while vfio type1 returns success. Fix vfio_compat to match.
Fixes: d624d6652a65 ("iommufd: vfio container FD ioctl compatibility")
Link: https://patch.msgid.link/r/0-v1-76be45eff0be+5d-iommufd_unmap_compat_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Reported-by: Alex Mastro <amastro@fb.com>
Closes: https://lore.kernel.org/r/aP0S5ZF9l3sWkJ1G@devgpu012.nha5.facebook.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Store the tools/testing/selftests/vfio/lib outputs (e.g. object files)
in $(OUTPUT)/libvfio rather than in $(OUTPUT)/lib. This is in
preparation for building the VFIO selftests library into the KVM
selftests (see Link below).
Specifically this will avoid name conflicts between
tools/testing/selftests/{vfio,kvm/lib and also avoid leaving behind
empty directories under tools/testing/selftests/kvm after a make clean.
Link: https://lore.kernel.org/kvm/20250912222525.2515416-2-dmatlack@google.com/
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250922224857.2528737-1-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The iommufd self test uses an xarray to store the pfns and their orders to
emulate a page table. Make it act more like a real iommu driver by
replacing the xarray with an iommupt based page table. The new AMDv1 mock
format behaves similarly to the xarray.
Add set_dirty() as a iommu_pt operation to allow the test suite to
simulate HW dirty.
Userspace can select between several formats including the normal AMDv1
format and a special MOCK_IOMMUPT_HUGE variation for testing huge page
dirty tracking. To make the dirty tracking test work the page table must
only store exactly 2M huge pages otherwise the logic the test uses
fails. They cannot be broken up or combined.
Aside from aligning the selftest with a real page table implementation,
this helps test the iommupt code itself.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().
This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
|
|
Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()
This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
|
|
By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same extra long commands are present twice, with small differences:
the variable for the stdin file is different.
Use new dedicated variables in one command to avoid this code
duplication.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-3-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Write raw BTF to files, parse it and compare to original;
this allows us to test parsing of (multi-)split BTF code.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-3-alan.maguire@oracle.com
|
|
Verify that when using simple socket-based coredump (@ pattern),
the coredump_signal field is correctly exposed as SIGABRT.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-22-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that when using simple socket-based coredump (@ pattern),
the coredump_signal field is correctly exposed as SIGSEGV.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-21-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If we crash multiple processes at the same time we may run out of space.
Just ignore those errors. They're not actually all that relevant for the
test.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-20-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So it's easier to figure out bugs.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-19-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
So it's easier to figure out bugs.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-18-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
so we can easily figure out why something failed.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-17-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
by putting the file descriptor into non-blocking mode.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-16-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
PIDFD_INFO_COREDUMP is only retrievable until the task has exited. After
it has exited task->mm is NULL. So if the task didn't actually coredump
we can't retrieve it's dumpability settings anymore. Only if the task
did coredump will we have stashed the coredump information in the
respective struct pid.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-15-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need to request PIDFD_INFO_COREDUMP in the first place.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-14-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Split the coredump socket tests into separate files.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-13-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
into separate files.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-12-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that supported_mask is returned even when other fields are
requested.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-11-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that when PIDFD_INFO_SUPPORTED_MASK is requested, the kernel
returns the supported_mask field indicating which flags the kernel
supports.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-10-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Include the new defines and members.
Link: https://patch.msgid.link/20251028-work-coredump-signal-v1-9-ca449b7b7aa0@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add testcase to run busy poll test with threaded napi busy poll enabled.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases to verify the correctness of the BPF verifier's branch analysis
when conditional jumps are performed on the same scalar register. And make sure
that JGT does not trigger verifier BUG.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251103063108.1111764-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Both livepatch and BPF trampoline use ftrace. Special attention is needed
when livepatch and fexit program touch the same function at the same
time, because livepatch updates a kernel function and the BPF trampoline
need to call into the right version of the kernel function.
Use samples/livepatch/livepatch-sample.ko for the test.
The test covers two cases:
1) When a fentry program is loaded first. This exercises the
modify_ftrace_direct code path.
2) When a fentry program is loaded first. This exercises the
register_ftrace_direct code path.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
