| Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
The child_ns_mode sysctl parameter becomes write-once in a future patch
in this series, which breaks existing tests. This patch updates the
tests to respect this new policy. No additional tests are added.
Add "global-parent" and "local-parent" namespaces as intermediaries to
spawn namespaces in the given modes. This avoids the need to change
"child_ns_mode" in the init_ns. nsenter must be used because ip netns
unshares the mount namespace so nested "ip netns add" breaks exec calls
from the init ns. Adds nsenter to the deps check.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU
event when unregistering slave".
The test hangs due to a reference count leak without the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
[ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
[ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
And passes with the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
ok 1 selftests: drivers/net/team: refleak.sh
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a packetdrill test that verifies we accept bare FIN packets when
the advertised receive window is zero.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-2-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A GCS mapping should not be accessible after mprotect(PROT_NONE). Add a
kselftest for this scenario.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
test_progs has custom SIGSEGV handler, which interferes with the
address sanitizer [1]. Add an #ifndef to avoid this.
Additionally, declare an __asan_on_error() to dump the test logs in
the same way it happens in the custom SIGSEGV handler.
[1] https://lore.kernel.org/bpf/73d832948b01dbc0ebc60d85574bdf8537f3a810.camel@gmail.com/
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpftool_maps_access and bpftool_metadata tests may fail on BPF CI
with "command not found", depending on a workflow.
This happens because detect_bpftool_path() only checks two hardcoded
relative paths:
- ./tools/sbin/bpftool
- ../tools/sbin/bpftool
Add support for a BPFTOOL environment variable that allows specifying
the exact path to the bpftool binary.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- kmem_cache_iter: remove unnecessary debug output
- lwt_seg6local: change the type of foobar to char[]
- the sizeof(foobar) returned the pointer size and not a string
length as intended
- verifier_log: increase prog_name buffer size in verif_log_subtest()
- compiler has a conservative estimate of fixed_log_sz value, making
ASAN complain on snprint() call
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compiler cannot infer upper bound for labels.cnt and warns about
potential buffer overflow in snprintf. Add an explicit bounds
check (... && i < MAX_LOCAL_LABELS) in the loop condition to fix the
warning.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-18-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN reported a resource leak due to the bpf_object not being tracked
in test_sysctl. Add obj field to struct sysctl_test to properly clean
it up.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-17-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN reported a number of resource leaks:
- Add missing *__destroy(skel) calls
- Replace bpf_link__detach() with bpf_link__destroy() where appropriate
- cgrp_local_storage: Add bpf_link__destroy() when bpf_iter_create fails
- dynptr: Add missing bpf_object__close()
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-16-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN reported a "joining already joined thread" error. The
release_child() may be called multiple times for the same struct
child.
Fix by resetting child->thread to 0 after pthread_join.
Also memset(0) static child variable in test_attach_api().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-15-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN reported a use-after-free in close_xsk().
The xsk->socket internally references xsk->umem via socket->ctx->umem,
so the socket must be deleted before the umem. Fix the order of
operations in close_xsk().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-14-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN detected a memory leak in veristat. The cleanup code handling
ENUMERATOR value missed freeing strdup-ed svalue. Fix it.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-13-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The Close() macro uses the passed in expression three times, which
leads to repeated execution in case it has side effects. That is,
Close(i--) would decrement i three times.
ASAN caught a stack-buffer-undeflow error at a point where this was
overlooked. Fix it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-12-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix trivial memory leaks detected by userspace ASAN:
- htab_update: free value buffer in test_reenter_update cleanup
- test_xsk: inline pkt_stream_replace() in testapp_stats_rx_full()
and testapp_stats_fill_empty()
- testing_helpers: free buffer allocated by getline() in
parse_test_list_file
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-11-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ASAN reported a memory leak in bpf_get_ksyms(): it allocates a struct
ksyms internally and never frees it.
Move struct ksyms to trace_helpers.h and return it from the
bpf_get_ksyms(), giving ownership to the caller. Add filtered_syms and
filtered_cnt fields to the ksyms to hold the filtered array of
symbols, previously returned by bpf_get_ksyms().
Fixup the call sites: kprobe_multi_test and bench_trigger.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260223190736.649171-10-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a denylist file for tests that should be skipped when built with
userspace ASAN:
$ make ... SAN_CFLAGS="-fsanitize=address -fno-omit-frame-pointer"
Skip the following tests:
- *arena*: userspace ASAN does not understand BPF arena maps and gets
confused particularly when map_extra is non-zero
- non-zero map_extra leads to mmap with MAP_FIXED, and ASAN treats
this as an unknown memory region
- task_local_data: ASAN complains about "incorrect" aligned_alloc()
usage, but it's intentional in the test
- uprobe_multi_test: very slow with ASAN enabled
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-9-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
EXTRA_* and SAN_* build flags were not correctly propagated to bpftool
and resolve_btids when building selftests/bpf. This led to various
build errors on attempt to build with SAN_CFLAGS="-fsanitize=address",
for example.
Fix the makefiles to address this:
- Pass SAN_CFLAGS/SAN_LDFLAGS to bpftool and resolve_btfids build
- Propagate EXTRA_LDFLAGS to resolve_btfids link command
- Use pkg-config to detect zlib and zstd for resolve_btfids, similar
libelf handling
Also check for ASAN flag in selftests/bpf/Makefile for convenience.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-7-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace strncpy() with memcpy() in cases where the source is
non-NULL-terminated and the copy length is known.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-6-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace strncpy() calls in bpftool_helpers.c with strscpy().
Pass the destination buffer size to detect_bpftool_path() instead of
hardcoding BPFTOOL_PATH_MAX_LEN.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-5-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
strncpy() does not guarantee NULL-termination and is considered
deprecated [1]. Replace strncpy() calls with strscpy().
[1] https://docs.kernel.org/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-4-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
opaque devices
Verify Wacom devices set INPUT_PROP_DIRECT on display devices and
INPUT_PROP_POINTER on opaque devices. Verify INPUT_PROP_POINTER
is not set on display devices and INPUT_PROP_DIRECT is not set
on opaque devices.
Moved test_prop_pointer into TestOpaqueTablet. Created a
DirectTabletTest mixin class for test_prop_direct that can be
inherited by display tablet test classes.Used DirectTabletTest
for TestDTH2452Tablet case.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Tested-by: Erin Skomra <erin.skomra@wacom.com>
Reviewed-by: Erin Skomra <erin.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
strcpy() does not perform bounds checking and is considered deprecated
[1]. Replace strcpy() calls with strscpy() defined in bpf_util.h.
[1] https://docs.kernel.org/process/deprecated.html#strcpy
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace bpf_strlcpy() in bpf_util.h with a sized_strscpy(), which is a
simplified sized_strscpy() from the kernel (lib/string.c [1]). It:
* takes a count (destination size) parameter
* guarantees NULL-termination
* returns the number of characters copied or -E2BIG
Re-define strscpy macro similar to in-kernel implementation [2]: allow
the count parameter to be optional.
Add #ifdef-s to tools/include/linux/args.h, as they may be defined in
other system headers (for example, __CONCAT in sys/cdefs.h).
Fixup the single existing bpf_strlcpy() call in cgroup_helpers.c
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/lib/string.c?h=v6.19#n113
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/string.h?h=v6.19#n91
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cpuset_handle_hotplug() may need to invoke housekeeping_update(),
for instance, when an isolated partition is invalidated because its
last active CPU has been put offline.
As we are going to enable dynamic update to the nozh_full housekeeping
cpumask (HK_TYPE_KERNEL_NOISE) soon with the help of CPU hotplug,
allowing the CPU hotplug path to call into housekeeping_update() directly
from update_isolation_cpumasks() will likely cause deadlock. So we
have to defer any call to housekeeping_update() after the CPU hotplug
operation has finished. This is now done via the workqueue where
the update_hk_sched_domains() function will be invoked via the
hk_sd_workfn().
An concurrent cpuset control file write may have executed the required
update_hk_sched_domains() function before the work function is called. So
the work function call may become a no-op when it is invoked.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The "S+" command is used in the test matrix to enable the cpuset
controller. However this can be done automatically and we never use the
"S-" command to disable cpuset controller. Simplify the test matrix and
reduce clutter by removing the command and doing that automatically.
There is no functional change to the test cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The header <unistd.h> is included twice in rt_stall.c. Remove the
redundant inclusion to clean up the code.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The read() call in run_test() triggers a warn_unused_result compiler
warning, which breaks the build under -Werror.
Check the return value of read() and exit the child process on failure to
satisfy the compiler and handle pipe read errors.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The runner sets exit_req on SIGINT/SIGTERM but ignores it during the
main loop. This prevents users from cleanly interrupting a test run.
Check exit_req each iteration to safely break out on exit signals.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Various bug fixes for the example schedulers and selftests
* tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: fix getopt not re-parsed on restart
tools/sched_ext: scx_userland: fix data races on shared counters
tools/sched_ext: scx_pair: fix stride == 0 crash on single-CPU systems
tools/sched_ext: scx_central: fix CPU_SET and skeleton leak on early exit
tools/sched_ext: scx_userland: fix stale data on restart
tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats
selftests/sched_ext: Fix rt_stall flaky failure
tools/sched_ext: scx_userland: fix restart and stats thread lifecycle bugs
tools/sched_ext: scx_central: fix sched_setaffinity() call with the set size
tools/sched_ext: scx_flatcg: zero-initialize stats counter array
|
|
Add a test to verify that RSS contexts persist across interface
down/up along with their associated Ntuple filters. Another test
that creates contexts/rules keeping interface down and test their
persistence is also added.
Tested on bnxt_en:
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: rss_ctx.py
# TAP version 13
# 1..2
# ok 1 rss_ctx.test_rss_context_persist_create_and_ifdown
# ok 2 rss_ctx.test_rss_context_persist_ifdown_and_create # SKIP Create context not supported with interface down
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260219185313.2682148-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
Add ipv4-mapped-ipv6 case to ksft_runner.sh before
an upcoming TCP fix in this area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260217142924.1853498-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with xxd,
and a switch to hexdump has been done in commit b640d556a2b3
("selftests/bpf: Remove xxd util dependency").
hexdump is a more common utility program, yet it might not be installed
by default. When it is not installed, BPF selftests build without
errors, but tests_progs is unusable: it exits with the 255 code and
without any error messages. When manually reproducing the issue, it is
not too hard to find out that the generated verification_cert.h file is
incorrect, but that's time consuming. When digging the BPF selftests
build logs, this line can be seen amongst thousands others, but ignored:
/bin/sh: 2: hexdump: not found
Here, od is used instead of hexdump. od is coming from the coreutils
package, and this new od command produces the same output when using od
from GNU coreutils, uutils, and even busybox. This is more portable, and
it produces a similar results to what was done before with hexdump:
there is an extra comma at the end instead of trailing whitespaces,
but the C code is not impacted.
Fixes: b640d556a2b3 ("selftests/bpf: Remove xxd util dependency")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20260218-bpf-sft-hexdump-od-v2-1-2f9b3ee5ab86@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
- Replace linux/* includes with vmlinux.h
- Include errno.h
- Include bpf_tracing_net.h for TC_ACT_* and ETH_*
- Use BPF_STDERR instead of BPF_STREAM_STDERR
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260218215651.2057673-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred
^^^^^^^^^
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tests use the tc pedit action to modify the IPv4 source address
("pedit ex munge ip src set"), but the IP header checksum is not
recalculated after the modification. As a result, the modified packet
fails sanity checks in br_netfilter after bridging and is dropped,
which causes the test to fail.
Fix this by ensuring net.bridge.bridge-nf-call-iptables is set to 0
during the test execution. This prevents the bridge from passing
L2 traffic to netfilter, bypassing the checksum validation that
causes the test failure.
Fixes: 92ad3828944e ("selftests: forwarding: Add a test for pedit munge SIP and DIP")
Fixes: 226657ba2389 ("selftests: forwarding: Add a forwarding test for pedit munge dsfield")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-4-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
br_netfilter enabled
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f220 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
enabled
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Recently we were able to trigger a warning in the mdb_n_entries counting
code. Add tests that exercise different ways which used to trigger that
warning.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://patch.msgid.link/20260213070031.1400003-3-nikolay@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add check_rx_hds test that verifies header/data split works across
payload sizes. The test sweeps payload sizes from 1 byte to 8KB, if any
data propagates up to userspace as SCM_DEVMEM_LINEAR, then the test
fails. This shows that regardless of payload size, ncdevmem's
configuration of hds-thresh to 0 is respected.
Add -L (--fail-on-linear) flag to ncdevmem that causes the receiver to
fail if any SCM_DEVMEM_LINEAR cmsg is received.
Use socat option for fixed block sizing and tcp nodelay to disable
nagle's algo to avoid buffering.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260211-fbnic-tcp-hds-fixes-v1-4-55d050e6f606@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
|
|
Now that the RISC-V trampoline JIT supports BPF_TRACE_FSESSION, run
the fsession selftest on riscv64 as well as x86_64.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20260208053311.698352-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
broke map_kptr selftest since it removed the function we were kprobing.
Use a new kfunc that invokes call_rcu_tasks_trace and sets a program
provided pointer to an integer to 1. Technically this can be unsafe if
the memory being written to from the callback disappears, but this is
just for usage in a test where we ensure we spin until we see the value
to be set to 1, so it's ok.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Fixes: c27cea4416a3 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260211185747.3630539-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
do_filp_open() was renamed in commit
541003b576c3 ("rename do_filp_open() to do_file_open()")
This broke test_profiler, because it uses a kretprobe on that
function. Fix it by renaming accordingly.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/bpf/djwjf2vfb7gro3rfag666bojod6ytcectahnb5z6hx2hawimtj@sx47ghzjg4lw/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260210235855.215679-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
wait_for_port() can wait up to 2 seconds with the sleep and the polling
in wait_local_port_listen() combined. So, in netcons_basic.sh, the socat
process could die before the test writes to the netconsole.
Increase the timeout to 3 seconds to make netcons_basic.sh pass
consistently.
Fixes: 3dc6c76391cb ("selftests: net: Add IPv6 support to netconsole basic tests")
Signed-off-by: Pin-yen Lin <treapking@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210005939.3230550-1-treapking@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|