| Age | Commit message (Collapse) | Author |
|---|
|
A KASAN tag mismatch, possibly causing a kernel panic, can be observed
on systems with a tag-based KASAN enabled and with multiple NUMA nodes.
It was reported on arm64 and reproduced on x86. It can be explained in
the following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in
preparation for the actual fix.
Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d53 ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kasan: vmalloc: Fixes for the percpu allocator and
vrealloc", v3.
Patches fix two issues related to KASAN and vmalloc.
The first one, a KASAN tag mismatch, possibly resulting in a kernel panic,
can be observed on systems with a tag-based KASAN enabled and with
multiple NUMA nodes. Initially it was only noticed on x86 [1] but later a
similar issue was also reported on arm64 [2].
Specifically the problem is related to how vm_structs interact with
pcpu_chunks - both when they are allocated, assigned and when pcpu_chunk
addresses are derived.
When vm_structs are allocated they are unpoisoned, each with a different
random tag, if vmalloc support is enabled along the KASAN mode. Later
when first pcpu chunk is allocated it gets its 'base_addr' field set to
the first allocated vm_struct. With that it inherits that vm_struct's
tag.
When pcpu_chunk addresses are later derived (by pcpu_chunk_addr(), for
example in pcpu_alloc_noprof()) the base_addr field is used and offsets
are added to it. If the initial conditions are satisfied then some of the
offsets will point into memory allocated with a different vm_struct. So
while the lower bits will get accurately derived the tag bits in the top
of the pointer won't match the shadow memory contents.
The solution (proposed at v2 of the x86 KASAN series [3]) is to unpoison
the vm_structs with the same tag when allocating them for the per cpu
allocator (in pcpu_get_vm_areas()).
The second one reported by syzkaller [4] is related to vrealloc and
happens because of random tag generation when unpoisoning memory without
allocating new pages. This breaks shadow memory tracking and needs to
reuse the existing tag instead of generating a new one. At the same time
an inconsistency in used flags is corrected.
This patch (of 3):
Syzkaller reported a memory out-of-bounds bug [4]. This patch fixes two
issues:
1. In vrealloc the KASAN_VMALLOC_VM_ALLOC flag is missing when
unpoisoning the extended region. This flag is required to correctly
associate the allocation with KASAN's vmalloc tracking.
Note: In contrast, vzalloc (via __vmalloc_node_range_noprof)
explicitly sets KASAN_VMALLOC_VM_ALLOC and calls
kasan_unpoison_vmalloc() with it. vrealloc must behave consistently --
especially when reusing existing vmalloc regions -- to ensure KASAN can
track allocations correctly.
2. When vrealloc reuses an existing vmalloc region (without allocating
new pages) KASAN generates a new tag, which breaks tag-based memory
access tracking.
Introduce KASAN_VMALLOC_KEEP_TAG, a new KASAN flag that allows reusing the
tag already attached to the pointer, ensuring consistent tag behavior
during reallocation.
Pass KASAN_VMALLOC_KEEP_TAG and KASAN_VMALLOC_VM_ALLOC to the
kasan_unpoison_vmalloc inside vrealloc_node_align_noprof().
Link: https://lkml.kernel.org/r/cover.1765978969.git.m.wieczorretman@pm.me
Link: https://lkml.kernel.org/r/38dece0a4074c43e48150d1e242f8242c73bf1a5.1764874575.git.m.wieczorretman@pm.me
Link: https://lore.kernel.org/all/e7e04692866d02e6d3b32bb43b998e5d17092ba4.1738686764.git.maciej.wieczor-retman@intel.com/ [1]
Link: https://lore.kernel.org/all/aMUrW1Znp1GEj7St@MiWiFi-R3L-srv/ [2]
Link: https://lore.kernel.org/all/CAPAsAGxDRv_uFeMYu9TwhBVWHCCtkSxoWY4xmFB_vowMbi8raw@mail.gmail.com/ [3]
Link: https://syzkaller.appspot.com/bug?extid=997752115a851cb0cf36 [4]
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reported-by: syzbot+997752115a851cb0cf36@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e243a2.050a0220.1696c6.007d.GAE@google.com/T/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t'
Fixes: 52fbf1134d47 ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update phy driver to enable SS combo phy for this SoC. New registers'
definitions, phy ops (init/exit), and dedicated phy driver data
structure are added for SS combo phy. Add these changes in the driver
to support SS combo phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-7-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Enable UTMI+ phy support for this SoC which is very similar to what
the existing Exynos850 supports.
Add required change in phy driver to support HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-3-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to the device tree. Add generic helpers so that we
don't have to duplicate this across multiple drivers.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PHY core defines phy_pm_runtime_put() to return an int, but that
return value is never used. It also passes the return value of
pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void. Also drop the redundant
pm_runtime_enabled() call from there.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2556645.jE0xQCEvom@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Likely the last pull request in 2025, again a collection of lots of
small fixes. Most of them are various device-specific small fixes:
- An ASoC core fix for correcting the clamping behavior of *_SX mixer
elements
- Various fixes for ASoC fsl, SOF, etc
- Usual HD- and USB-audio quirks / fix-ups
- A couple of error-handling fixes for legacy PCMCIA drivers"
* tag 'sound-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: fix PCI SSID for one of the HP 200 G2i laptop
ASoC: ops: fix snd_soc_get_volsw for sx controls
ALSA: hda/realtek: Add Asus quirk for TAS amplifiers
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L63 with feedback
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L56 with feedback
ASoC: fsl-asoc-card: Use of_property_present() for non-boolean properties
ASoC: rt1320: update VC blind write settings
ASoC: fsl_xcvr: provide regmap names
ASoC: fsl_sai: Add missing registers to cache default
ASoC: ak4458: remove the reset operation in probe and remove
ASoC: fsl_asrc_dma: fix duplicate debugfs directory error
ASoC: fsl_easrc: fix duplicate debugfs directory error
ALSA: hda/realtek: fix micmute LED reversed on HP Abe and Bantie
ALSA: hda/realtek: Add support for HP Clipper Laptop
ALSA: hda/realtek: Add support for HP Trekker Laptop
ALSA: usb-mixer: us16x08: validate meter packet indices
ASoC: Intel: soc-acpi-intel-nvl-match: Drop rt722 l3 from the match table
ASoC: soc-acpi / SOF: Add best_effort flag to get_function_tplg_files op
ASoC: SOF: Intel: pci-mtl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: ipc4-topology: set playback channel mask
...
|
|
configfs_group_operations
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 in commit 83c0afaec7b7 ("net: dsa: Add
new binding implementation")
- one for non-OF, introduced in 2017 in commit 71e0bbde0d88 ("net: dsa:
Add support for platform data")
These are both complete rewrites of the original probing paths (which
used struct dsa_switch_driver and other weird stuff, instead of regular
devices on their respective buses for register access, like MDIO, SPI,
I2C etc):
- one for OF, introduced in 2013 in commit 5e95329b701c ("dsa: add
device tree bindings to register DSA switches")
- one for non-OF, introduced in 2008 in commit 91da11f870f0 ("net:
Distributed Switch Architecture protocol support")
except for tiny bits and pieces like dsa_dev_to_net_device() which were
seemingly carried over since the original commit, and used to this day.
The point is that the original probing paths received a fix in 2015 in
the form of commit 679fb46c5785 ("net: dsa: Add missing master netdev
dev_put() calls"), but the fix never made it into the "new" (dsa2)
probing paths that can still be traced to today, and the fixed probing
path was later deleted in 2019 in commit 93e86b3bc842 ("net: dsa: Remove
legacy probing support").
That is to say, the new probing paths were never quite correct in this
area.
The existence of the legacy probing support which was deleted in 2019
explains why dsa_dev_to_net_device() returns a conduit with elevated
refcount (because it was supposed to be released during
dsa_remove_dst()). After the removal of the legacy code, the only user
of dsa_dev_to_net_device() calls dev_put(conduit) immediately after this
function returns. This pattern makes no sense today, and can only be
interpreted historically to understand why dev_hold() was there in the
first place.
Change details
--------------
Today we have a better netdev tracking infrastructure which we should
use. Logically netdev_hold() belongs in common code
(dsa_port_parse_cpu(), where dp->conduit is assigned), but there is a
tradeoff to be made with the rtnl_lock() section which would become a
bit too long if we did that - dsa_port_parse_cpu() also calls
request_module(). So we duplicate a bit of logic in order for the
callers of dsa_port_parse_cpu() to be the ones responsible of holding
the conduit reference and releasing it on error. This shortens the
rtnl_lock() section significantly.
In the dsa_switch_probe() error path, dsa_switch_release_ports() will be
called in a number of situations, one being where dsa_port_parse_cpu()
maybe didn't get the chance to run at all (a different port failed
earlier, etc). So we have to test for the conduit being NULL prior to
calling netdev_put().
There have still been so many transformations to the code since the
blamed commits (rename master -> conduit, commit 0650bf52b31f ("net:
dsa: be compatible with masters which unregister on shutdown")), that it
only makes sense to fix the code using the best methods available today
and see how it can be backported to stable later. I suspect the fix
cannot even be backported to kernels which lack dsa_switch_shutdown(),
and I suspect this is also maybe why the long-lived conduit reference
didn't make it into the new DSA probing paths at the time (problems
during shutdown).
Because dsa_dev_to_net_device() has a single call site and has to be
changed anyway, the logic was just absorbed into the non-OF
dsa_port_parse().
Tested on the ocelot/felix switch and on dsa_loop, both on the NXP
LS1028A with CONFIG_DEBUG_KOBJECT_RELEASE=y.
Reported-by: Ma Ke <make24@iscas.ac.cn>
Closes: https://lore.kernel.org/netdev/20251214131204.4684-1-make24@iscas.ac.cn/
Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Fixes: 71e0bbde0d88 ("net: dsa: Add support for platform data")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251215150236.3931670-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a906c ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 16b5ad31952476fb925c401897fc171cd37f536b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Support destination migration over interconnect when migrating from
device-private pages with the same dev_pagemap owner.
Since we now also collect device-private pages to migrate,
also abort migration if the range to migrate is already
fully populated with pages from the desired pagemap.
Finally return -EBUSY from drm_pagemap_populate_mm()
if the migration can't be completed without first migrating all
pages in the range to system. It is expected that the caller
will perform that before retrying the call to
drm_pagemap_populate_mm().
v3:
- Fix a bug where the p2p dma-address was never used.
- Postpone enabling destination interconnect migration,
since xe devices require source interconnect migration to
ensure the source L2 cache is flushed at migration time.
- Update the drm_pagemap_migrate_to_devmem() interface to
pass migration details.
v4:
- Define XE_INTERCONNECT_P2P unconditionally (CI)
- Include a missing header (CI)
v5:
- Use page order increments where possible (Matt Brost).
- Fix a negated value of can_migrate_same_pagemap.
- Move removal of some dead code to a separate patch (Matt Brost).
- Remove an unnecessary zdd get() and put() (Matt Brost).
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-23-thomas.hellstrom@linux.intel.com
|
|
With multi-device we are much more likely to have multiple
drm-gpusvm ranges pointing to the same struct mm range.
To avoid calling into drm_pagemap_populate_mm(), which is always
very costly, introduce a much less costly drm_gpusvm function,
drm_gpusvm_scan_mm() to scan the current migration state.
The device fault-handler and prefetcher can use this function to
determine whether migration is really necessary.
There are a couple of performance improvements that can be done
for this function if it turns out to be too costly. Those are
documented in the code.
v3:
- New patch.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-21-thomas.hellstrom@linux.intel.com
|
|
Use the dev_pagemap->owner field wherever possible, simplifying
the code slightly.
v3: New patch
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-20-thomas.hellstrom@linux.intel.com
|
|
placement for svm
Use device file descriptors and regions to represent pagemaps on
foreign or local devices.
The underlying files are type-checked at madvise time, and
references are kept on the drm_pagemap as long as there is are
madvises pointing to it.
Extend the madvise preferred_location UAPI to support the region
instance to identify the foreign placement.
v2:
- Improve UAPI documentation. (Matt Brost)
- Sanitize preferred_mem_loc.region_instance madvise. (Matt Brost)
- Clarify madvise drm_pagemap vs xe_pagemap refcounting. (Matt Brost)
- Don't allow a foreign drm_pagemap madvise without a fast
interconnect.
v3:
- Add a comment about reference-counting in xe_devmem_open() and
remove the reference-count get-and-put. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251219113320.183860-16-thomas.hellstrom@linux.intel.com
|
|
interconnected gpus
The hmm_range_fault() and the migration helpers currently need a common
"owner" to identify pagemaps and clients with fast interconnect.
Add a drm_pagemap utility to setup such owners by registering
drm_pagemaps, in a registry, and for each new drm_pagemap,
query which existing drm_pagemaps have fast interconnects with the new
drm_pagemap.
The "owner" scheme is limited in that it is static at drm_pagemap creation.
Ideally one would want the owner to be adjusted at run-time, but that
requires changes to hmm. If the proposed scheme becomes too limited,
we need to revisit.
v2:
- Improve documentation of DRM_PAGEMAP_OWNER_LIST_DEFINE(). (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-11-thomas.hellstrom@linux.intel.com
|
|
Pagemaps are costly to set up and tear down, and they consume a lot
of system memory for the struct pages. Ideally they should be
created only when needed.
Add a caching mechanism to allow doing just that: Create the drm_pagemaps
when needed for migration. Keep them around to avoid destruction and
re-creation latencies and destroy inactive/unused drm_pagemaps on memory
pressure using a shrinker.
Only add the helper functions. They will be hooked up to the xe driver
in the upcoming patch.
v2:
- Add lockdep checking for drm_pagemap_put(). (Matt Brost)
- Add a copyright notice. (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-8-thomas.hellstrom@linux.intel.com
|
|
If a device holds a reference on a foregin device's drm_pagemap,
and a device unbind is executed on the foreign device,
Typically that foreign device would evict its device-private
pages and then continue its device-managed cleanup eventually
releasing its drm device and possibly allow for module unload.
However, since we're still holding a reference on a drm_pagemap,
when that reference is released and the provider module is
unloaded we'd execute out of undefined memory.
Therefore keep a reference on the provider device and module until
the last drm_pagemap reference is gone.
Note that in theory, the drm_gpusvm_helper module may be unloaded
as soon as the final module_put() of the provider driver module is
executed, so we need to add a module_exit() function that waits
for the work item executing the module_put() has completed.
v2:
- Better commit message (Matt Brost)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-7-thomas.hellstrom@linux.intel.com
|
|
With the end goal of being able to free unused pagemaps
and allocate them on demand, add a refcount to struct drm_pagemap,
remove the xe embedded drm_pagemap, allocating and freeing it
explicitly.
v2:
- Make the drm_pagemap pointer in drm_gpusvm_pages reference-counted.
v3:
- Call drm_pagemap_get() before drm_pagemap_put() in drm_gpusvm_pages
(Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-5-thomas.hellstrom@linux.intel.com
|
|
In situations where no system memory is migrated to devmem, and in
upcoming patches where another GPU is performing the migration to
the newly allocated devmem buffer, there is nothing to ensure any
ongoing clear to the devmem allocation or async eviction from the
devmem allocation is complete.
Address that by passing a struct dma_fence down to the copy
functions, and ensure it is waited for before migration is marked
complete.
v3:
- New patch.
v4:
- Update the logic used for determining when to wait for the
pre_migrate_fence.
- Update the logic used for determining when to warn for the
pre_migrate_fence since the scheduler fences apparently
can signal out-of-order.
v5:
- Fix a UAF (CI)
- Remove references to source P2P migration (Himal)
- Put the pre_migrate_fence after migration.
v6:
- Pipeline the pre_migrate_fence dependency (Matt Brost)
Fixes: c5b3eb5a906c ("drm/xe: Add GPUSVM device memory copy vfunc functions")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> # For merging through drm-xe.
Link: https://patch.msgid.link/20251219113320.183860-4-thomas.hellstrom@linux.intel.com
|
|
Using libc types and headers from the UAPI headers is problematic as it
introduces a dependency on a full C toolchain.
Use the fixed-width integer types provided by the UAPI headers instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251222-uapi-idxd-v1-1-baa183adb20d@linutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
All remove functions return zero and the driver core ignores any other
returned value (just emits a warning about it being ignored). So make all
remove callbacks return void instead of an ignored int. This is in line
with most other subsystems.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20251215174925.1327021-5-u.kleine-koenig@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Introduce BPF kfuncs to conveniently access memcg data:
- bpf_mem_cgroup_vm_events(),
- bpf_mem_cgroup_memory_events(),
- bpf_mem_cgroup_usage(),
- bpf_mem_cgroup_page_state(),
- bpf_mem_cgroup_flush_stats().
These functions are useful for implementing BPF OOM policies, but
also can be used to accelerate access to the memcg data. Reading
it through cgroupfs is much more expensive, roughly 5x, mostly
because of the need to convert the data into the text and back.
JP Kobryn:
An experiment was setup to compare the performance of a program that
uses the traditional method of reading memory.stat vs a program using
the new kfuncs. The control program opens up the root memory.stat file
and for 1M iterations reads, converts the string values to numeric data,
then seeks back to the beginning. The experimental program sets up the
requisite libbpf objects and for 1M iterations invokes a bpf program
which uses the kfuncs to fetch all available stats for node_stat_item,
memcg_stat_item, and vm_event_item types.
The results showed a significant perf benefit on the experimental side,
outperforming the control side by a margin of 93%. In kernel mode,
elapsed time was reduced by 80%, while in user mode, over 99% of time
was saved.
control: elapsed time
real 0m38.318s
user 0m25.131s
sys 0m13.070s
experiment: elapsed time
real 0m2.789s
user 0m0.187s
sys 0m2.512s
control: perf data
33.43% a.out libc.so.6 [.] __vfscanf_internal
6.88% a.out [kernel.kallsyms] [k] vsnprintf
6.33% a.out libc.so.6 [.] _IO_fgets
5.51% a.out [kernel.kallsyms] [k] format_decode
4.31% a.out libc.so.6 [.] __GI_____strtoull_l_internal
3.78% a.out [kernel.kallsyms] [k] string
3.53% a.out [kernel.kallsyms] [k] number
2.71% a.out libc.so.6 [.] _IO_sputbackc
2.41% a.out [kernel.kallsyms] [k] strlen
1.98% a.out a.out [.] main
1.70% a.out libc.so.6 [.] _IO_getline_info
1.51% a.out libc.so.6 [.] __isoc99_sscanf
1.47% a.out [kernel.kallsyms] [k] memory_stat_format
1.47% a.out [kernel.kallsyms] [k] memcpy_orig
1.41% a.out [kernel.kallsyms] [k] seq_buf_printf
experiment: perf data
10.55% memcgstat bpf_prog_..._query [k] bpf_prog_16aab2f19fa982a7_query
6.90% memcgstat [kernel.kallsyms] [k] memcg_page_state_output
3.55% memcgstat [kernel.kallsyms] [k] _raw_spin_lock
3.12% memcgstat [kernel.kallsyms] [k] memcg_events
2.87% memcgstat [kernel.kallsyms] [k] __memcg_slab_post_alloc_hook
2.73% memcgstat [kernel.kallsyms] [k] kmem_cache_free
2.70% memcgstat [kernel.kallsyms] [k] entry_SYSRETQ_unsafe_stack
2.25% memcgstat [kernel.kallsyms] [k] __memcg_slab_free_hook
2.06% memcgstat [kernel.kallsyms] [k] get_page_from_freelist
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20251223044156.208250-5-roman.gushchin@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
To use memcg_page_state_output() in bpf_memcontrol.c move the
declaration from v1-specific memcontrol-v1.h to memcontrol.h.
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20251223044156.208250-2-roman.gushchin@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Eliminate the following kernel-doc warnings in nilfs2_api.h:
Warning: include/uapi/linux/nilfs2_api.h:65 cannot understand function
prototype: 'struct nilfs_suinfo'
Warning: include/uapi/linux/nilfs2_api.h:101 cannot understand function
prototype: 'struct nilfs_suinfo_update'
This ensures that the documentation for nilfs_suinfo and
nilfs_suinfo_update is correctly parsed and generated by adding the
missing 'struct' keyword to their kernel-doc comments.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
Eliminate 40+ kernel-doc warnings in nilfs2_ondisk.h by converting
all of the struct member comments to kernel-doc comments.
Fix one misnamed struct member in nilfs_direct_node.
Object files before and after are the same size and content.
Examples of warnings:
Warning: include/uapi/linux/nilfs2_ondisk.h:202 struct member 's_rev_level'
not described in 'nilfs_super_block'
Warning: include/uapi/linux/nilfs2_ondisk.h:202 struct member
's_minor_rev_level' not described in 'nilfs_super_block'
Warning: include/uapi/linux/nilfs2_ondisk.h:202 struct member 's_magic'
not described in 'nilfs_super_block'
Warning: include/uapi/linux/nilfs2_ondisk.h:202 struct member 's_bytes'
not described in 'nilfs_super_block'
Warning: include/uapi/linux/nilfs2_ondisk.h:202 struct member 's_flags'
not described in 'nilfs_super_block'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
For several years, and still ongoing, the kernel.h is being split
to smaller and narrow headers to avoid "including everything" approach
which is bad in many ways. Since that, documentation missed a few
required updates to align with that work. Do it here.
Note, language translations are left untouched and if anybody willing
to help, please provide path(es) based on the updated English variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251126214709.2322314-1-andriy.shevchenko@linux.intel.com>
|
|
The media kAPI has two global variables at v4l2-ioctl.h. Document
them.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <8ebe25ff579962fec09b586f00e77fae7802985f.1765894964.git.mchehab+huawei@kernel.org>
|
|
The kunit_run_irq_test() helper allows a function to be run in hardirq
and softirq contexts (in addition to the task context). It does this by
running the user-provided function concurrently in the three contexts,
until either a timeout has expired or a number of iterations have
completed in the normal task context.
However, on setups where the initialisation of the hardirq and softirq
contexts (or, indeed, the scheduling of those tasks) is significantly
slower than the function execution, it's possible for that number of
iterations to be exceeded before any runs in irq contexts actually
occur. This occurs with the polyval.test_polyval_preparekey_in_irqs
test, which runs 20000 iterations of the relatively fast preparekey
function, and therefore fails often under many UML, 32-bit arm, m68k and
other environments.
Instead, ensure that the max_iterations limit counts executions in all
three contexts, and requires at least one of each. This will cause the
test to continue iterating until at least the irq contexts have been
tested, or the 1s wall-clock limit has been exceeded. This causes the
test to pass in all of my environments.
In so doing, we also update the task counters to atomic ints, to better
match both the 'int' max_iterations input, and to ensure they are
correctly updated across contexts.
Finally, we also fix a few potential assertion messages to be
less-specific to the original crypto usecases.
Fixes: 950a81224e8b ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20251219085259.1163048-1-davidgow@google.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some fixups to the jack handling, adding some necessary hooks to connect
things with the machine driver. I have split these out from the system
suspend chain as that has been generating a fair amount of discussion
and getting these 3 merged is far more important to get basic
functionality working smoothly. I will do a spin of the system suspend
stuff soon, if either no new comments pop up, or we reach some consensus
on how to proceed.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:
This constifies the response data used for APR/GPR callbacks.
|
|
Fix kernel-doc comments to prevent kernel-doc warnings:
Warning: include/linux/moduleparam.h:364 function parameter 'arg' not
described in '__core_param_cb'
Warning: include/linux/moduleparam.h:395 No description found for return
value of 'parameq'
Warning: include/linux/moduleparam.h:405 No description found for return
value of 'parameqn'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
[Sami: Clarified the commit message]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Currently if set_module_sig_enforced is called with CONFIG_MODULE_SIG=n
e.g. [1], it can lead to a linking error,
ld: security/integrity/ima/ima_appraise.o: in function `ima_appraise_measurement':
security/integrity/ima/ima_appraise.c:587:(.text+0xbbb): undefined reference to `set_module_sig_enforced'
This happens because the actual implementation of
set_module_sig_enforced comes from CONFIG_MODULE_SIG but both the
function declaration and the empty stub definition are tied to
CONFIG_MODULES.
So bind set_module_sig_enforced to CONFIG_MODULE_SIG instead. This
allows (future) users to call set_module_sig_enforced directly without
the "if IS_ENABLED(CONFIG_MODULE_SIG)" safeguard.
Note this issue hasn't caused a real problem because all current callers
of set_module_sig_enforced e.g. security/integrity/ima/ima_efi.c
use "if IS_ENABLED(CONFIG_MODULE_SIG)" safeguard.
[1] https://lore.kernel.org/lkml/20250928030358.3873311-1-coxu@redhat.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510030029.VRKgik99-lkp@intel.com/
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Remove the __INIT_OR_MODULE, __INITDATA_OR_MODULE and
__INITRODATA_OR_MODULE macros. These were introduced in commit 8b5a10fc6fd0
("x86: properly annotate alternatives.c"). Only __INITRODATA_OR_MODULE was
ever used, in arch/x86/kernel/alternative.c. In 2011, commit dc326fca2b64
("x86, cpu: Clean up and unify the NOP selection infrastructure") removed
this usage.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
ETM_OPT_* definitions duplicate the PMU format attributes that have
always been published in sysfs. Hardcoding them here makes it misleading
as to what the 'real' PMU API is and prevents attributes from being
rearranged in the future.
ETM4_CFG_BIT_* definitions just define what the Arm Architecture is
which is not the responsibility of the kernel to do and doesn't scale to
other registers or versions of ETM. It's not an actual software ABI/API
and these definitions here mislead that it is.
Any tools using the first ones would be broken anyway as they won't work
when attributes are moved, so removing them is the right thing to do and
will prompt a fix. Tools using the second ones can trivially redefine
them locally.
Perf also has its own copy of the headers so both of these things can be
fixed up at a later date.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251128-james-cs-syncfreq-v8-10-4d319764cc58@linaro.org
|
|
Fix kernel-doc warnings in intel_vsec.h to eliminate all kernel-doc
warnings:
Warning: include/linux/intel_vsec.h:92 struct member 'read_telem' not
described in 'pmt_callbacks'
Warning: include/linux/intel_vsec.h:146 expecting prototype for struct
intel_sec_device. Prototype was for struct intel_vsec_device instead
Warning: include/linux/intel_vsec.h:146 struct member 'priv_data_size'
not described in 'intel_vsec_device'
In struct pmt_callbacks, correct the kernel-doc for @read_telem.
kernel-doc doesn't support documenting callback function parameters,
so drop the '@' signs on those and use "* *" to make them somewhat
readable in the produced documentation output.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251216063801.2896495-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
functions
There is no real reason to include drm_colorop.h from drm_atomic.h, as
drm_atomic_get_{old,new}_colorop_state() have no real reason to be
static inline.
Convert the static inlines to proper functions, and drop the include to
reduce the include dependencies and improve data hiding.
v2: Fix vkms build failures (Alex)
Fixes: cfc27680ee20 ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Alex Hung <alex.hung@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20251219114939.1069851-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The initial plane parent interface ->alloc_obj hook no longer needs the
crtc for anything. Pass struct drm_device instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7a40381be6d98dc0916a5447be5dd6cba86cfd0a.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
->setup
The initial plane parent interface ->setup hook no longer needs the crtc
for anything. Pass the struct drm_plane_state instead.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c3db101ef5fd13c56cb3a9329adecf521a807abc.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move intel_reuse_initial_plane_obj() into common display code, and split
the ->find_obj hook into ->alloc_obj and ->setup hooks.
Return the struct drm_gem_object from ->alloc_obj in preparation for
moving more things to display.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/c71011dbb11afaa5c4da30aa2627833374300d63.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
i915 and xe
Move some easy common parts to display. Initially, the
intel_find_initial_plane_obj() error path seems silly, but it'll be more
helpful this way for later changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/950d308172443d5bae975aa1ab72111720134219.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the parent interface at one step lower level, allowing
deduplication.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/0cb4077a5a39274c7a2dae95d548d7b33365a518.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add the initial plane handling functions to the display parent
interface. Add the call wrappers in dedicated intel_initial_plane.c
instead of intel_parent.c, as we'll be refactoring the calls heavily.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/ab91c891677fe2bb83bf5aafa5ee984b2442b84d.1765812266.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fwnode references are be implemented differently if referenced node is a
software node. _Generic() is used to differentiate between the two cases
but only const software nodes were present in the selection. Also add
non-const software nodes.
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/all/af773b82-bef2-4209-baaf-526d4661b7fc@panix.com/
Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Link: https://patch.msgid.link/20251219083638.2454138-1-sakari.ailus@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add handling for the ASoC jack API to SDCA to allow user-space to be
hooked up normally.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153650.3913117-3-ckeepax@opensource.cirrus.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The jack code is perhaps a bit large for being in the interrupt
code directly. Improve the encapsulation by factoring out the
jack handling code into a new c file, as is already done for HID
and FDL. Whilst doing so also add a jack_state structure to hold
the jack state for improved expandability in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153650.3913117-2-ckeepax@opensource.cirrus.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using libc types and headers from the UAPI headers is problematic as it
introduces a dependency on a full C toolchain.
Use the fixed-width integer type provided by the UAPI headers instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251222-uapi-regulator-v1-1-a71c66eb1a94@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix FPU core dumps on certain CPU models
- Fix htmldocs build warning
- Export TLB tracing event name via header
- Remove unused constant from <linux/mm_types.h>
- Fix comments
- Fix whitespace noise in documentation
- Fix variadic structure's definition to un-confuse UBSAN
- Fix posted MSI interrupts irq_retrigger() bug
- Fix asm build failure with older GCC builds
* tag 'x86-urgent-2025-12-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Fix old GCC compile fails
x86/msi: Make irq_retrigger() functional for posted MSI
x86/platform/uv: Fix UBSAN array-index-out-of-bounds
mm: Remove tlb_flush_reason::NR_TLB_FLUSH_REASONS from <linux/mm_types.h>
x86/mm/tlb/trace: Export the TLB_REMOTE_WRONG_CPU enum in <trace/events/tlb.h>
x86/sgx: Remove unmatched quote in __sgx_encl_extend function comment
x86/boot/Documentation: Fix whitespace noise in boot.rst
x86/fpu: Fix FPU state core dump truncation on CPUs with no extended xfeatures
x86/boot/Documentation: Fix htmldocs build warning due to malformed table in boot.rst
|
|
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64 by
changing 'active' to a per-CPU array of four u8 counters, one per
context: {NMI, hard-irq, soft-irq, normal}. The running context uses a
non-atomic increment/decrement on its element. After increment,
recursion is detected by reading the array as a u32 and verifying that
only the expected element changed; any change in another element
indicates inter-context recursion, and a value > 1 in the same element
indicates same-context recursion.
For example, starting from {0,0,0,0}, a normal-context trigger changes
the array to {0,0,0,1}. If an NMI arrives on the same CPU and triggers
the program, the array becomes {1,0,0,1}. When the NMI context checks
the u32 against the expected mask for normal (0x00000001), it observes
0x01000001 and correctly reports recursion. Same-context recursion is
detected analogously.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
