| Age | Commit message (Collapse) | Author |
|---|
|
Improve the existing annotations to properly support Clang's context
analysis.
The old annotations distinguished between RCU, RCU_BH, and RCU_SCHED;
however, to more easily be able to express that "hold the RCU read lock"
without caring if the normal, _bh(), or _sched() variant was used we'd
have to remove the distinction of the latter variants: change the _bh()
and _sched() variants to also acquire "RCU".
When (and if) we introduce context locks to denote more generally that
"IRQ", "BH", "PREEMPT" contexts are disabled, it would make sense to
acquire these instead of RCU_BH and RCU_SCHED respectively.
The above change also simplified introducing __guarded_by support, where
only the "RCU" context lock needs to be held: introduce __rcu_guarded,
where Clang's context analysis warns if a pointer is dereferenced
without any of the RCU locks held, or updated without the appropriate
helpers.
The primitives rcu_assign_pointer() and friends are wrapped with
context_unsafe(), which enforces using them to update RCU-protected
pointers marked with __rcu_guarded.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20251219154418.3592607-15-elver@google.com
|
|
The annotations for bit_spinlock.h have simply been using "bitlock" as
the token. For Sparse, that was likely sufficient in most cases. But
Clang's context analysis is more precise, and we need to ensure we
can distinguish different bitlocks.
To do so, add a token context, and a macro __bitlock(bitnum, addr)
that is used to construct unique per-bitlock tokens.
Add the appropriate test.
<linux/list_bl.h> is implicitly included through other includes, and
requires 2 annotations to indicate that acquisition (without release)
and release (without prior acquisition) of its bitlock is intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-14-elver@google.com
|
|
Including <linux/bit_spinlock.h> into an empty TU will result in the
compiler complaining:
./include/linux/bit_spinlock.h:34:4: error: call to undeclared function 'cpu_relax'; <...>
34 | cpu_relax();
| ^
1 error generated.
Include <asm/processor.h> to allow including bit_spinlock.h where
<asm/processor.h> is not otherwise included.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251219154418.3592607-13-elver@google.com
|
|
Add support for Clang's context analysis for seqlock_t.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-12-elver@google.com
|
|
Add support for Clang's context analysis for mutex.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-11-elver@google.com
|
|
While Sparse is oblivious to the return value of conditional acquire
functions, Clang's context analysis needs to know the return value
which indicates successful acquisition.
Add the additional argument, and convert existing uses.
Notably, Clang's interpretation of the value merely relates to the use
in a later conditional branch, i.e. 1 ==> context lock acquired in
branch taken if condition non-zero, and 0 ==> context lock acquired in
branch taken if condition is zero. Given the precise value does not
matter, introduce symbolic variants to use instead of either 0 or 1,
which should be more intuitive.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-10-elver@google.com
|
|
Add support for Clang's context analysis for raw_spinlock_t,
spinlock_t, and rwlock. This wholesale conversion is required because
all three of them are interdependent.
To avoid warnings in constructors, the initialization functions mark a
lock as acquired when initialized before guarded variables.
The test verifies that common patterns do not generate false positives.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-9-elver@google.com
|
|
Clang's context analysis can be made aware of functions that assert that
locks are held.
Presence of these annotations causes the analysis to assume the context
lock is held after calls to the annotated function, and avoid false
positives with complex control-flow; for example, where not all
control-flow paths in a function require a held lock, and therefore
marking the function with __must_hold(..) is inappropriate.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-8-elver@google.com
|
|
Introduce basic compatibility with cleanup.h infrastructure.
We need to allow the compiler to see the acquisition and release of the
context lock at the start and end of a scope. However, the current
"cleanup" helpers wrap the lock in a struct passed through separate
helper functions, which hides the lock alias from the compiler (no
inter-procedural analysis).
While Clang supports scoped guards in C++, it's not possible to apply in
C code: https://clang.llvm.org/docs/ThreadSafetyAnalysis.html#scoped-context
However, together with recent improvements to Clang's alias analysis
abilities, idioms such as this work correctly now:
void spin_unlock_cleanup(spinlock_t **l) __releases(*l) { .. }
...
{
spinlock_t *lock_scope __cleanup(spin_unlock_cleanup) = &lock;
spin_lock(&lock); // lock through &lock
... critical section ...
} // unlock through lock_scope -[alias]-> &lock (no warnings)
To generalize this pattern and make it work with existing lock guards,
introduce DECLARE_LOCK_GUARD_1_ATTRS() and WITH_LOCK_GUARD_1_ATTRS().
These allow creating an explicit alias to the context lock instance that
is "cleaned" up with a separate cleanup helper. This helper is a dummy
function that does nothing at runtime, but has the release attributes to
tell the compiler what happens at the end of the scope.
Example usage:
DECLARE_LOCK_GUARD_1_ATTRS(mutex, __acquires(_T), __releases(*(struct mutex **)_T))
#define class_mutex_constructor(_T) WITH_LOCK_GUARD_1_ATTRS(mutex, _T)
Note: To support the for-loop based scoped helpers, the auxiliary
variable must be a pointer to the "class" type because it is defined in
the same statement as the guard variable. However, we initialize it with
the lock pointer (despite the type mismatch, the compiler's alias
analysis still works as expected). The "_unlock" attribute receives a
pointer to the auxiliary variable (a double pointer to the class type),
and must be cast and dereferenced appropriately.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-7-elver@google.com
|
|
Context Analysis is a language extension, which enables statically
checking that required contexts are active (or inactive), by acquiring
and releasing user-definable "context locks". An obvious application is
lock-safety checking for the kernel's various synchronization primitives
(each of which represents a "context lock"), and checking that locking
rules are not violated.
Clang originally called the feature "Thread Safety Analysis" [1]. This
was later changed and the feature became more flexible, gaining the
ability to define custom "capabilities". Its foundations can be found in
"Capability Systems" [2], used to specify the permissibility of
operations to depend on some "capability" being held (or not held).
Because the feature is not just able to express "capabilities" related
to synchronization primitives, and "capability" is already overloaded in
the kernel, the naming chosen for the kernel departs from Clang's
"Thread Safety" and "capability" nomenclature; we refer to the feature
as "Context Analysis" to avoid confusion. The internal implementation
still makes references to Clang's terminology in a few places, such as
`-Wthread-safety` being the warning option that also still appears in
diagnostic messages.
[1] https://clang.llvm.org/docs/ThreadSafetyAnalysis.html
[2] https://www.cs.cornell.edu/talc/papers/capabilities.pdf
See more details in the kernel-doc documentation added in this and
subsequent changes.
Clang version 22+ is required.
[peterz: disable the thing for __CHECKER__ builds]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251219154418.3592607-3-elver@google.com
|
|
The conditional definition of lock checking macros and attributes is
about to become more complex. Factor them out into their own header for
better readability, and to make it obvious which features are supported
by which mode (currently only Sparse). This is the first step towards
generalizing towards "context analysis".
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251219154418.3592607-2-elver@google.com
|
|
resctrl assumes that all monitor events can be displayed as unsigned decimal
integers.
Hardware architecture counters may provide some telemetry events with greater
precision where the event is not a simple count, but is a measurement of some
sort (e.g. Joules for energy consumed).
Add a new argument to resctrl_enable_mon_event() for architecture code to
inform the file system that the value for a counter is a fixed-point value
with a specific number of binary places.
Only allow architecture to use floating point format on events that the file
system has marked with mon_evt::is_floating_point which reflects the contract
with user space on how the event values are displayed.
Display fixed point values with values rounded to ceil(binary_bits * log10(2))
decimal places. Special case for zero binary bits to print "{value}.0".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Adding a reference count to the v4l2_m2m_dev structure allow safely
sharing it across multiple hardware nodes. This can be used to prevent
running jobs concurrently on m2m cores that have some internal resource
sharing.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typos in v4l2_m2m_put documentation]
|
|
Keep track of the number of requests and request objects of a media
device. Helps to verify that all request-related memory is freed.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
By default when the last request object is completed, the whole
request completes as well.
But sometimes you want to delay this completion to an arbitrary point in
time so add a manual complete mode for this.
In req_queue the driver marks the request for manual completion by
calling media_request_mark_manual_completion, and when the driver
wants to manually complete the request it calls
media_request_manual_complete().
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
resctrl assumes that monitor events can only be read from a CPU in the
cpumask_t set of each domain. This is true for x86 events accessed with an
MSR interface, but may not be true for other access methods such as MMIO.
Introduce and use flag mon_evt::any_cpu, settable by architecture, that
indicates there are no restrictions on which CPU can read that event. This
flag is not supported by the L3 event reading that requires to be run on a CPU
that belongs to the L3 domain of the event being read.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Currently, the helper of_find_spi_controller_by_node() is gated under
CONFIG_OF_DYNAMIC. This prevents drivers from using it in all CONFIG_OF
configurations.
This patch moves the gating to CONFIG_OF, keeping the inline fallback
returning NULL when Device Tree support is disabled.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/6d8ae977d9f4726ea23ad5382638750593f9a2e4.1767148150.git.oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices are primarily described on another bus (e.g. I2C) but also
have an additional SPI connection that serves as a transport for
firmware loading. Export of_find_spi_controller_by_node() so drivers can
obtain the SPI controller referenced by a DT phandle.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/0e572a00aa305e588357162d400ba9472ce56dd3.1767148150.git.oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add cs_dsp_mock_bin_add_patch_off32(). This is the same as
cs_dsp_mock_bin_add_patch() except that it puts the offset in the
new 32-bit offset field and modifies the block type to indicate
that it uses the long offset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an argument to cs_dsp_mock_bin_add_raw_block() to pass a 32-bit
offset, and change the type of the existing offset argument to u16.
The cs_dsp_test_bin_error.c test uses cs_dsp_mock_bin_add_raw_block()
so it needs corresponding updates to pass 0 as the 32-bit offset.
Version 1 and 2 of the bin file format had a 16-bit offset on blocks
and the sample rate field of the blocks was not used. Version 3 adds
new block types that change the old sample rate field to be a 32-bit
offset with the old offset currently unused.
cs_dsp_mock_bin_add_raw_block() doesn't attempt to do any magic - its
purpose is to create a raw block exactly as specified by the calling
test code. So the test case can pass a value for both offset fields.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Handle a new type of data block that has a 32-bit offset. These are
identical to the normal blocks except that the offset is now in the
32-bit field that was previously 'sr'.
A new file version of 3 indicates that it is mandatory to process
the long-offset blocks, so that older code without that support will
reject the file.
The original 'sr' field was never used by the driver so it has been
renamed offset32.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the SYSCTL_USER_TO_KERN_UINT_CONV and SYSCTL_UINT_CONV_CUSTOM
macros with functions with the same logic. This makes debugging easier
and aligns with the functions preference described in coding-style.rst.
Update the only user of this API: pipe.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Wrap sysctl converter macros with CONFIG_PROC_SYSCTL conditional
compilation. When CONFIG_PROC_SYSCTL is disabled, provide stub
implementations that return -ENOSYS to prevent link errors while
maintaining API compatibility.
This ensures converter macros are only compiled when procfs sysctl
support is enabled in the kernel configuration.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Remove superfluous forward declarations of ctl_table from header files
where they are no longer needed. These declarations were left behind
after sysctl code refactoring and cleanup.
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Manual formatting the GUIDs can lead to errors, document a
programmatically way to format the GUIDs from lsusb into something that
the driver can use.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The upcoming telemetry event monitoring is not tied to the L3 resource and
will have a new domain structure.
Rename the L3 resource specific domain data structures to include "l3_"
in their names to avoid confusion between the different resource specific
domain structures:
rdt_mon_domain -> rdt_l3_mon_domain
rdt_hw_mon_domain -> rdt_hw_l3_mon_domain
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Convert the whole call sequence from mon_event_read() to resctrl_arch_rmid_read() to
pass resource independent struct rdt_domain_hdr instead of an L3 specific domain
structure to prepare for monitoring events in other resources.
This additional layer of indirection obscures which aspects of event counting depend
on a valid domain. Event initialization, support for assignable counters, and normal
event counting implicitly depend on a valid domain while summing of domains does not.
Split summing domains from the core event counting handling to make their respective
dependencies obvious.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Some of the functions are local to the module and some are not used
starting from commit 36783dec8d79 ("RDMA/rxe: Delete deprecated module
parameters interface"). Delete and avoid exporting them.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Link: https://patch.msgid.link/20260104-ib-core-misc-v1-2-00367f77f3a8@nvidia.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new ibv_query_port_speed() verb to enable applications to query
the effective bandwidth of a port.
This verb is particularly useful when the speed is not a multiplication
of IB speed and width where width is 2^n.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce ib_port_attr_to_rate() to compute the data rate in 100 Mbps
units (deci-Gb/sec) from a port's active_speed and active_width
attributes. This generic helper removes duplicated speed-to-rate
calculations, which are used by sysfs and the upcoming new verb.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add IB_EVENT_DEVICE_SPEED_CHANGE for notifying user applications on
device's ports speed changes.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add mlx5_lag_query_bond_speed() to query the aggregated speed of
lag configurations with a bond device.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add port change event handling logic for MPESW LAG mode, ensuring
VFs are updated when the speed of LAG physical ports changes.
This triggers a speed update workflow when relevant port state changes
occur, enabling consistent and accurate reporting of VF bandwidth.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, vports report only their parent's uplink speed, which in LAG
setups does not reflect the true aggregated bandwidth. This makes it
hard for upper-layer software to optimize load balancing decisions
based on accurate bandwidth information.
Fix the issue by calculating the possible maximum speed of a LAG as
the sum of speeds of all active uplinks that are part of the LAG.
Propagate this effective max speed to vports associated with the LAG
whenever a relevant event occurs, such as physical port link state
changes or LAG creation/modification.
With this change, upper-layer components receive accurate bandwidth
information corresponding to the active members of the LAG and can
make better load balancing decisions.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the max_tx_speed field to the query and modify_vport_state
structures.
Add the esw_vport_state_max_tx_speed capability bit, indicating
the firmware support modifying the max_tx_speed field via the
MODIFY_VPORT_STATE command.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery
waiting on kthreadd, which is attempting to reclaim memory by calling
nfs_release_folio(). The latter cannot make progress due to state
recovery being needed.
It seems that the only safe thing to do here is to kick off a writeback
of the folio, without waiting for completion, or else kicking off an
asynchronous commit.
Reported-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Fixes: 96780ca55e3c ("NFS: fix up nfs_release_folio() to try to release the page")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com>
Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Borislav Petkov:
- Make sure clang inlines trivial local_irq_* helpers
* tag 'core_urgent_for_v6.19_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Always inline local_irq_{enable,disable}_exit_to_user()
|
|
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Every resctrl resource has a list of domain structures. struct rdt_ctrl_domain
and struct rdt_mon_domain both begin with struct rdt_domain_hdr with
rdt_domain_hdr::type used in validity checks before accessing the domain of
a particular type.
Add the resource id to struct rdt_domain_hdr in preparation for a new monitoring
domain structure that will be associated with a new monitoring resource. Improve
existing domain validity checks with a new helper domain_header_is_valid()
that checks both domain type and resource id. domain_header_is_valid() should
be used before every call to container_of() that accesses a domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
'20251117-mdss-resets-msm8917-msm8937-v2-1-a7e9bbdaac96@mainlining.org' into HEAD
Merge the addition of MDSS reset to the MSM8917 GCC binding, in order to
get access to the introduced constant.
|
|
Export and namespace those not prefixed with drm_* so
it becomes possible to write custom commit tail functions
in individual drivers using the helper infrastructure.
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com
|
|
This reverts commit c9b1150a68d9362a0827609fc0dc1664c0d8bfe1.
Changing the enable/disable sequence has caused regressions on multiple
platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to
fix these, but it was decided that it's better to revert the original
patch and change the enable/disable sequence only in the tidss driver.
Reverting this commit breaks tidss's DSI and OLDI outputs, which will be
fixed in the following commits.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Cc: stable@vger.kernel.org # v6.17+
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com
|
|
into clk-for-6.20
Merge the addition of missing UFS PHY clocks in Hamoa GCC binding
through topic branch, to allow it to be merged into DeviceTree branch as
well.
|
|
Add some of the UFS symbol rx/tx muxes were not initially described.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-ufs_symbol_clk-v2-1-51828cc76236@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The __opt annotation was originally introduced specifically for
buffer/size argument pairs in bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr(), allowing the buffer pointer to be NULL while
still validating the size as a constant. The __nullable annotation
serves the same purpose but is more general and is already used
throughout the BPF subsystem for raw tracepoints, struct_ops, and other
kfuncs.
This patch unifies the two annotations by replacing __opt with
__nullable. The key change is in the verifier's
get_kfunc_ptr_arg_type() function, where mem/size pair detection is now
performed before the nullable check. This ensures that buffer/size
pairs are correctly classified as KF_ARG_PTR_TO_MEM_SIZE even when the
buffer is nullable, while adding an !arg_mem_size condition to the
nullable check prevents interference with mem/size pair handling.
When processing KF_ARG_PTR_TO_MEM_SIZE arguments, the verifier now uses
is_kfunc_arg_nullable() instead of the removed is_kfunc_arg_optional()
to determine whether to skip size validation for NULL buffers.
This is the first documentation added for the __nullable annotation,
which has been in use since it was introduced but was previously
undocumented.
No functional changes to verifier behavior - nullable buffer/size pairs
continue to work exactly as before.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102221513.1961781-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_map_memcg_enter() and bpf_map_memcg_exit() helpers to
reduce code duplication in memcg context management.
bpf_map_memcg_enter() gets the memcg from the map, sets it as active,
and returns both the previous and the now active memcg.
bpf_map_memcg_exit() restores the previous active memcg and releases the
reference obtained during enter.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102200230.25168-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Fix the kunit_run_irq_test() function (which I recently added for the
CRC and crypto tests) to be less timing-dependent.
This fixes flakiness in the polyval kunit test suite"
* tag 'libcrypto-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
kunit: Enforce task execution in {soft,hard}irq contexts
|
|
Pull rdma fixes from Jason Gunthorpe:
- Fix several syzkaller found bugs:
- Poor parsing of the RDMA_NL_LS_OP_IP_RESOLVE netlink
- GID entry refcount leaking when CM destruction races with
multicast establishment
- Missing refcount put in ib_del_sub_device_and_put()
- Fixup recently introduced uABI padding for 32 bit consistency
- Avoid user triggered math overflow in MANA and AFA
- Reading invalid netdev data during an event
- kdoc fixes
- Fix never-working gid copying in ib_get_gids_from_rdma_hdr
- Typo in bnxt when validating the BAR
- bnxt mis-parsed IB_SEND_IP_CSUM so it didn't work always
- bnxt out of bounds access in bnxt related to the counters on new
devices
- Allocate the bnxt PDE table with the right sizing
- Use dma_free_coherent() correctly in bnxt
- Allow rxe to be unloadable when CONFIG_PROVE_LOCKING by adjusting the
tracking of the global sockets it uses
- Missing unlocking on error path in rxe
- Compute the right number of pages in a MR in rtrs
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: fix dma_free_coherent() pointer
RDMA/rtrs: Fix clt_path::max_pages_per_mr calculation
IB/rxe: Fix missing umem_odp->umem_mutex unlock on error path
RDMA/bnxt_re: Fix to use correct page size for PDE table
RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats()
RDMA/bnxt_re: Fix IB_SEND_IP_CSUM handling in post_send
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
RDMA/rxe: let rxe_reclassify_recv_socket() call sk_owner_put()
RDMA/bnxt_re: Fix incorrect BAR check in bnxt_qplib_map_creq_db()
RDMA/core: Fix logic error in ib_get_gids_from_rdma_hdr()
RDMA/efa: Remove possible negative shift
RTRS/rtrs: clean up rtrs headers kernel-doc
RDMA/irdma: avoid invalid read in irdma_net_event
RDMA/mana_ib: check cqe length for kernel CQs
RDMA/irdma: Fix irdma_alloc_ucontext_resp padding
RDMA/ucma: Fix rdma_ucm_query_ib_service_resp struct padding
RDMA/cm: Fix leaking the multicast GID table reference
RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctly
|
