| Age | Commit message (Collapse) | Author |
|---|
|
The only external user is gone now, open code it in the two VFS
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260108141934.2052404-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In octal DTR mode addresses may either be long enough to cover at least
two bytes (in which case the existing macro works), or otherwise for
single byte addresses, the byte must also be duplicated and sent twice:
on each front of the clock.
Create a macro for this common case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260109-winbond-v6-17-rc1-oddr-v2-2-1fff6a2ddb80@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to introduce DTR support in SPI NAND, a number of macros had to
be created in the spi-mem layer. One of them remained unused at this
point, SPI_MEM_DTR_OP_CMD. Being in the process of introducing octal DTR
support now, experience shows that as-is the macro is not useful. In
order to be really useful in octal DTR mode, the command opcode (one
byte) must always be transmitted on the 8 data lines on both the rising
and falling edge of the clock. Align the macro with the real needs by
duplicating the opcode in the buffer and doubling its size.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260109-winbond-v6-17-rc1-oddr-v2-1-1fff6a2ddb80@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add structs and macros for struct sof_ipc4_module_init_ext_init,
following struct sof_ipc4_module_init_ext_object array, and
struct sof_ipc4_mod_init_ext_dp_memory_data as object payload.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260112113221.4442-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add topology tokens for defining user-space domain_id, required stack
and heap size byte for a component. The new topology tokens are
SOF_TKN_COMP_DOMAIN_ID, SOF_TKN_COMP_HEAP_BYTES_REQUIREMENT and
SOF_TKN_COMP_STACK_BYTES_REQUIREMENT for defining required stack and
heap size for a component.
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260112113221.4442-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit c31f91c6af96 ("fuse: don't allow signals to interrupt getdents
copying") introduced the use of high bits in d_type as flags. However,
overlayfs was not adapted to handle this change.
In ovl_cache_entry_new(), the code checks if d_type == DT_CHR to
determine if an entry might be a whiteout. When fuse is used as the
lower layer and sets high bits in d_type, this comparison fails,
causing whiteout files to not be recognized properly and resulting in
incorrect overlayfs behavior.
Fix this by requiring callers of iterate_dir() to opt-in for getting
flag bits in d_type outside of S_DT_MASK.
Fixes: c31f91c6af96 ("fuse: don't allow signals to interrupt getdents copying")
Link: https://lore.kernel.org/all/20260107034551.439-1-luochunsheng@ustc.edu/
Link: https://github.com/containerd/stargz-snapshotter/issues/2214
Reported-by: Chunsheng Luo <luochunsheng@ustc.edu>
Reviewed-by: Chunsheng Luo <luochunsheng@ustc.edu>
Tested-by: Chunsheng Luo <luochunsheng@ustc.edu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260108074522.3400998-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Setting ->setlease() to a NULL pointer now has the same effect as
setting it to simple_nosetlease(). Remove all of the setlease
file_operations that are set to simple_nosetlease, and the function
itself.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260108-setlease-6-20-v1-24-ea4dec9b67fa@kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update documentation reference to reflect the file rename.
Monitor synthesis documentation was renamed in commit f40a7c060207
("Documentation/rv: Prepare monitor synthesis document for LTL inclusion")
from da_monitor_synthesis.rst to monitor_synthesis.rst.
Signed-off-by: Shubham Sharma <slopixelz@gmail.com>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20251230075337.11993-1-slopixelz@gmail.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Previous changes refactored the da_monitor header file to avoid using
macros, however empty macros (e.g. DECLARE_DA_FUNCTION) were left to
ease review with diff tools.
Most macros also get the argument type which doesn't really have a
purpose since states have their own enum and the storage in struct
da_monitor is fixed to unsigned int.
Remove empty and no longer required macros and substitute the type
parameter with the appropriate enum.
Additionally break long line and adjust the format overall.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20251126104241.291258-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
The da_monitor helper functions are generated from macros of the type:
DECLARE_DA_FUNCTION(name, type) \
static void da_func_x_##name(type arg) {} \
static void da_func_y_##name(type arg) {} \
This is good to minimise code duplication but the long macros made of
skipped end of lines is rather hard to parse. Since functions are
static, the advantage of naming them differently for each monitor is
minimal.
Refactor the da_monitor.h file to minimise macros, instead of declaring
functions from macros, we simply declare them with the same name for all
monitors (e.g. da_func_x) and for any remaining reference to the monitor
name (e.g. tracepoints, enums, global variables) we use the CONCATENATE
macro.
In this way the file is much easier to maintain while keeping the same
generality.
Functions depending on the monitor types are now conditionally compiled
according to the value of RV_MON_TYPE, which must be defined in the
monitor source.
The monitor type can be specified as in the original implementation,
although it's best to keep the default implementation (unsigned char) as
not all parts of code support larger data types, and likely there's no
need.
We keep the empty macro definitions to ease review of this change with
diff tools, but cleanup is required.
Also adapt existing monitors to keep the build working.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20251126104241.291258-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
In source code comments, use terminology that comes from the JEDEC UFS
standard. This makes it easier to compare the UFS driver code with the
JEDEC UFS standard. Add static_assert() statements that verify the size
of data structures defined in the UFS standard.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106190017.2527978-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a long discussion about the use of private field in page
structure between Linux kernel developers.
This commit stop using page private to store DMA mapping address for
isochronous context, to prepare for mm future change.
Link: https://lore.kernel.org/r/20260110013911.19160-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
internal header
The fw_iso_buffer_lookup function is used by core module only, thus no
need to describe its prototype in kernel internal header.
Link: https://lore.kernel.org/r/20260110013911.19160-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Uwe Kleine-König <u.kleine-koenig@baylibre.com> says:
Hello,
this is v2 of the series to make the scsi subsystem stop using the
callbacks .probe(), .remove() and .shutdown() of struct device_driver.
Instead use their designated alternatives in struct bus_type.
The eventual goal is to drop the callbacks from struct device_driver.
The 2nd patch introduces some legacy handling for drivers still using
the device_driver callbacks. This results in a runtime warning (in
driver_register()). The following patches convert all in-tree drivers
(and thus fix the warnings one after another).
Conceptually this legacy handling could be dropped at the end of the
series, but I think this is a bad idea because this silently breaks
out-of-tree drivers (which also covers drivers that are currently
prepared for mainline submission) and in-tree drivers I might have
missed (though I'm convinced I catched them all). That convinces me that
keeping the legacy handling for at least one development cycle is the
right choice. I'll care for that at the latest when I remove the
callbacks from struct device_driver.
Link: https://patch.msgid.link/cover.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a bus-specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a SCSI
device in the drivers and changes the remove prototype to return
void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all SCSI drivers are converted, this results in a runtime warning about
the drivers needing an update because there is a bus probe function and
a driver probe function. The in-tree drivers are fixed by the following
commits.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/a54e363a3fd2054fb924afd7df44bca7f444b5f1.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This aligns with what other subsystems do, reduces boilerplate a bit for
device drivers and is less error prone.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/ac17fdea58e384cb514c639306d48ce0005820b0.1766133330.git.u.kleine-koenig@baylibre.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a blk_crypto_submit_bio helper that either submits the bio when
it is not encrypted or inline encryption is provided, but otherwise
handles the encryption before going down into the low-level driver.
This reduces the risk from bio reordering and keeps memory allocation
as high up in the stack as possible.
Note that if the submitter knows that inline enctryption is known to
be supported by the underyling driver, it can still use plain
submit_bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This returns the bio_crypt_ctx if CONFIG_BLK_INLINE_ENCRYPTION is enabled
and a crypto context is attached to the bio, else NULL.
The use case is to allow safely dereferencing the context in common code
without needed #ifdef CONFIG_BLK_INLINE_ENCRYPTION.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Map the link_down_reason from the FW to the ethtool link_ext_state
when it is available. Also log it to the link down dmesg when it is
available. Add 2 new link_ext_state enums to the UAPI:
ETHTOOL_LINK_EXT_STATE_OTP_SPEED_VIOLATION
ETHTOOL_LINK_EXT_STATE_BMC_REQUEST_DOWN
to cover OTP (one-time-programmable) speed restrictions and
BMC (Baseboard management controller) forcing the link down.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The main changes are the new HWRM_PORT_PHY_FDRSTAT command to collect
FEC histogram bins and the new HWRM_NVM_DEFRAG command to defragment the
NVRAM. There is also a minor name change in struct hwrm_vnic_cfg_input
that requires updating the bnxt_re driver's main.c.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260108183521.215610-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"AMDGPU_GEM_DOMAIN_MMIO_REMAP" - Never activated as UAPI and it turned
out that this was to inflexible.
Allocate the MMIO_REMAP buffer object as a regular GEM BO and explicitly
move it into the fixed AMDGPU_PL_MMIO_REMAP placement at the TTM level.
This avoids relying on GEM domain bits for MMIO_REMAP, keeps the
placement purely internal, and makes the lifetime and pinning of the
global MMIO_REMAP BO explicit. The BO is pinned in TTM so it cannot be
migrated or evicted.
The corresponding free path relies on normal DRM teardown ordering,
where no further user ioctls can access the global BO once TTM teardown
begins.
v2 (Srini):
- Updated patch title.
- Drop use of AMDGPU_GEM_DOMAIN_MMIO_REMAP in amdgpu_ttm.c. The
MMIO_REMAP domain bit is removed from UAPI, so keep the MMIO_REMAP BO
allocation domain-less (bp.domain = 0) and rely on the TTM placement
(AMDGPU_PL_MMIO_REMAP) for backing/pinning.
- Keep fdinfo/mem-stats visibility for MMIO_REMAP by classifying BOs
based on bo->tbo.resource->mem_type == AMDGPU_PL_MMIO_REMAP, since the
domain bit is removed.
v3: Squash patches #1 & #3
Fixes: 056132483724 ("drm/amdgpu/uapi: Introduce AMDGPU_GEM_DOMAIN_MMIO_REMAP")
Fixes: 2a7a794eb82c ("drm/amdgpu/ttm: Allocate/Free 4K MMIO_REMAP Singleton")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Cc: Ruijing Dong <ruijing.dong@amd.com>
Cc: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix all kernel-doc warnings in rocket_accel.h:
Warning: include/uapi/drm/rocket_accel.h:35 Incorrect use of kernel-doc
format: * Output: DMA address for the BO in the NPU address space.
This address
and 22 warnings like these:
Warning: include/uapi/drm/rocket_accel.h:43 struct member 'size'
not described in 'drm_rocket_create_bo'
Warning: include/uapi/drm/rocket_accel.h:60 struct member 'handle'
not described in 'drm_rocket_prep_bo'
Warning: include/uapi/drm/rocket_accel.h:73 struct member 'handle'
not described in 'drm_rocket_fini_bo'
Warning: include/uapi/drm/rocket_accel.h:86 struct member 'regcmd'
not described in 'drm_rocket_task'
Warning: include/uapi/drm/rocket_accel.h:116 struct member 'tasks'
not described in 'drm_rocket_job'
Warning: include/uapi/drm/rocket_accel.h:135 struct member 'jobs'
not described in 'drm_rocket_submit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251023062440.4093661-1-rdunlap@infradead.org
|
|
There are now three meanings for "number of RMIDs":
1) The number for legacy features enumerated by CPUID leaf 0xF. This is the
maximum number of distinct values that can be loaded into MSR_IA32_PQR_ASSOC.
Note that systems with Sub-NUMA Cluster mode enabled will force scaling down
the CPUID enumerated value by the number of SNC nodes per L3-cache.
2) The number of registers in MMIO space for each event. This is enumerated in
the XML files and is the value initialized into event_group::num_rmid.
3) The number of "hardware counters" (this isn't a strictly accurate
description of how things work, but serves as a useful analogy that does
describe the limitations) feeding to those MMIO registers. This is enumerated
in telemetry_region::num_rmids returned by intel_pmt_get_regions_by_feature().
Event groups with insufficient "hardware counters" to track all RMIDs are
difficult for users to use, since the system may reassign "hardware counters"
at any time. This means that users cannot reliably collect two consecutive
event counts to compute the rate at which events are occurring.
Disable such event groups by default. The user may override this with
a command line "rdt=" option. In this case limit an under-resourced event
group's number of possible monitor resource groups to the lowest number of
"hardware counters".
Scan all enabled event groups and assign the RDT_RESOURCE_PERF_PKG resource
"num_rmid" value to the smallest of these values as this value will be used
later to compare against the number of RMIDs supported by other resources to
determine how many monitoring resource groups are supported.
N.B. Change type of resctrl_mon::num_rmid to u32 to match its usage and the
type of event_group::num_rmid so that min(r->num_rmid, e->num_rmid) won't
complain about mixing signed and unsigned types.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Now, as the page_ext holds count of IOMMU mappings, we can use it to
assert that any page allocated/freed is indeed not in the IOMMU.
The sanitizer doesn’t protect against mapping/unmapping during this
period. However, that’s less harmful as the page is not used by the
kernel.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add calls for the new iommu debug config IOMMU_DEBUG_PAGEALLOC:
- iommu_debug_init: Enable the debug mode if configured by the user.
- iommu_debug_map: Track iommu pages mapped, using physical address.
- iommu_debug_unmap_begin: Track start of iommu unmap operation, with
IOVA and size.
- iommu_debug_unmap_end: Track the end of unmap operation, passing the
actual unmapped size versus the tracked one at unmap_begin.
We have to do the unmap_begin/end as once pages are unmapped we lose
the information of the physical address.
This is racy, but the API is racy by construction as it uses refcounts
and doesn't attempt to lock/synchronize with the IOMMU API as that will
be costly, meaning that possibility of false negative exists.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a new config IOMMU_DEBUG_PAGEALLOC, which registers new data to
page_ext.
This config will be used by the IOMMU API to track pages mapped in
the IOMMU to catch drivers trying to free kernel memory that they
still map in their domains, causing all types of memory corruption.
This behaviour is disabled by default and can be enabled using
kernel cmdline iommu.debug_pagealloc.
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out. E.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The OS should do something to mitigate this as we do not want production
systems to be reporting critical ATS failures, especially in a hypervisor
environment. Broadly, OS could arrange to ignore the timeouts, block page
table mutations to prevent invalidations, or disable and block ATS.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
Provide a callback from the PCI subsystem that will enclose the reset and
have the iommu core temporarily change all the attached RID/PASID domains
group->blocking_domain so that the IOMMU hardware would fence any incoming
ATS queries. And IOMMU drivers should also synchronously stop issuing new
ATS invalidations and wait for all ATS invalidations to complete. This can
avoid any ATS invaliation timeouts.
However, if there is a domain attachment/replacement happening during an
ongoing reset, ATS routines may be re-activated between the two function
calls. So, introduce a new resetting_domain in the iommu_group structure
to reject any concurrent attach_dev/set_dev_pasid call during a reset for
a concern of compatibility failure. Since this changes the behavior of an
attach operation, update the uAPI accordingly.
Note that there are two corner cases:
1. Devices in the same iommu_group
Since an attachment is always per iommu_group, this means that any
sibling devices in the iommu_group cannot change domain, to prevent
race conditions.
2. An SR-IOV PF that is being reset while its VF is not
In such case, the VF itself is already broken. So, there is no point
in preventing PF from going through the iommu reset.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
There is a need to stage a resetting PCI device to temporarily the blocked
domain and then attach back to its previously attached domain after reset.
This can be simply done by keeping the "previously attached domain" in the
iommu_group->domain pointer while adding an iommu_group->resetting_domain,
which gives troubles to IOMMU drivers using the iommu_get_domain_for_dev()
for a device's physical domain in order to program IOMMU hardware.
And in such for-driver use cases, the iommu_group->mutex must be held, so
it doesn't fit in external callers that don't hold the iommu_group->mutex.
Introduce a new iommu_driver_get_domain_for_dev() helper, exclusively for
driver use cases that hold the iommu_group->mutex, to separate from those
external use cases.
Add a lockdep_assert_not_held to the existing iommu_get_domain_for_dev()
and highlight that in a kdoc.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently the bus_find_device_by_acpi_dev() stub for !CONFIG_ACPI case
takes a const void * parameter instead of const struct acpi_device *.
As long as it's a pointer, we may named it as we want to with the help
of a forward declaration. Hence move the declaration out of the
ifdeffery and use the same prototype in both cases. This adds a bit of
an additional type checking at a compilation time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251229144325.1252197-1-andriy.shevchenko@linux.intel.com
[ Fix minor typo in the commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Every event group has a private copy of the data of all telemetry event
aggregators (aka "telemetry regions") tracking its feature type. Included
may be regions that have the same feature type but tracking different GUID
from the event group's.
Traverse the event group's telemetry region data and mark all regions that
are not usable by the event group as unusable by clearing those regions'
MMIO addresses. A region is considered unusable if:
1) GUID does not match the GUID of the event group.
2) Package ID is invalid.
3) The enumerated size of the MMIO region does not match the expected
value from the XML description file.
Hereafter any telemetry region with an MMIO address is considered valid for
the event group it is associated with.
Enable all the event group's events as long as there is at least one usable
region from where data for its events can be read. Enabling of an event can
fail if the same event has already been enabled as part of another event
group. It should never happen that the same event is described by different
GUID supported by the same system so just WARN (via resctrl_enable_mon_event())
and skip the event.
Note that it is architecturally possible that some telemetry events are only
supported by a subset of the packages in the system. It is not expected that
systems will ever do this. If they do the user will see event files in resctrl
that always return "Unavailable".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Move the cpuidle driver check from __acpi_processor_start() to
acpi_processor_power_init() which allows variable acpi_idle_driver to
become static.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-7-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Group all of the declarations of functions that belong to the ACPI
processor idle driver together in one place in processor.h.
While at it, drop the unnecessary extern modifier from the declaraions
of two functions.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-6-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that acpi_processor_power_init() and acpi_processor_power_exit()
don't need to return any values because their callers don't check them
anyway, so redefine those functions as void.
While at it, rearrange the code in acpi_processor_power_init() to
reduce the indentation level, get rid of a redundant local variable
in that function, and rephrase a code comment in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-5-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Empty stubs are defined in processor.h for some functions provided by
the ACPI processor idle driver, but those functions are only used in
the main ACPI processor driver which requires the ACPI processor idle
driver to be present (selecting CONFIG_ACPI_PROCESSOR causes
CONFIG_ACPI_PROCESSOR_IDLE to be selected too automatically).
This means that the empty stubs in question are not really necessary and
if both CONFIG_ACPI_PROCESSOR and CONFIG_ACPI_PROCESSOR_IDLE are unset,
the compiler complains that they are defined, but not used. Drop them
to get rid of the compiler warning.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-3-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, the ACPI idle driver is registered from within a CPU
hotplug callback. Although this didn't cause any functional issues,
this is questionable and confusing. And it is better to register
the cpuidle driver when all of the CPUs have been brought up.
So add a new function to initialize acpi_idle_driver based on the
power management information of an available CPU and register cpuidle
driver in acpi_processor_driver_init().
This commit has four changes under the commit 7a8c994cbb2d (ACPI:
processor: idle: Optimize ACPI idle driver registration):
1) move acpi_processor_register_idle_driver() ahead of the
driver_register().
2) add acpi_processor_cstate_first_run_checks() before calling
acpi_processor_get_power_info().
3) squash the commit 9d68320b2bca (ACPI: processor: idle: Fix
function defined but not used warning) into this change.
4) use for_each_possible_cpu(cpu) to scan all possible cpus.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
[ rjw: New comment edits, changelog tweak ]
Link: https://patch.msgid.link/20251223100914.2407069-2-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The comapt_xxx_class symbols aren't declared in anything that
lib/comapt_audit.c is including (arm64 build) which is causing
the following sparse warnings:
lib/compat_audit.c:7:10: warning: symbol 'compat_dir_class'
was not declared. Should it be static?
lib/compat_audit.c:12:10: warning: symbol 'compat_read_class'
was not declared. Should it be static?
lib/compat_audit.c:17:10: warning: symbol 'compat_write_class'
was not declared. Should it be static?
lib/compat_audit.c:22:10: warning: symbol 'compat_chattr_class'
was not declared. Should it be static?
lib/compat_audit.c:27:10: warning: symbol 'compat_signal_class'
was not declared. Should it be static?
Trying to fix this by chaning compat_audit.c to inclde <linux/audit.h>
does not work on arm64 due to compile errors with the extra includes
that changing this header makes. The simpler thing would be just to
move the definitons of these symbols out of <linux/audit.h> into
<linux/audit_arch.h> which is included.
Fixes: 4b58841149dca ("audit: Add generic compat syscall support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[PM: rewrite subject line, fixed line length in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Add dump to get-perf-domains, so that a user can fetch either information
about a specific performance domain with do or information about all
performance domains with dump. Share the reply format of do and dump using
perf-domain-attrs, so remove perf-domains. The YNL spec, autogenerated
files, and the do implementation are updated, and the dump implementation
is added.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-5-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EM YNL specification used many acronyms, including ‘em’, ‘pd’,
‘ps’, etc. While the acronyms are short and convenient, they could be
confusing. So, let’s spell them out to be more specific. The following
changes were made in the spec. Note that the protocol name cannot exceed
GENL_NAMSIZ (16).
em -> dev-energymodel
pds -> perf-domains
pd -> perf-domain
pd-id -> perf-domain-id
pd-table -> perf-table
ps -> perf-state
get-pds -> get-perf-domains
get-pd-table -> get-perf-table
pd-created -> perf-domain-created
pd-updated -> perf-domain-updated
pd-deleted -> perf-domain-deleted
In addition. doc strings were added to the spec. based on the comments in
energy_model.h. Two flag attributes (perf-state-flags and
perf-domain-flags) were added for easily interpreting the bit flags.
Finally, the autogenerated files and em_netlink.c were updated accordingly
to reflect the name changes.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-3-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add PCI_VENDOR_ID_ASPEED to the shared pci_ids.h header and remove the
duplicate local definition from ehci-pci.c.
This prepares for adding a PCI quirk for ASPEED devices.
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-1-nirmoyd@nvidia.com
|
|
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251204024647.1462866-1-acelan.kao@canonical.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"This fixes the ACPI/PCI legacy interrupts (INTx) parsing in the case
when the ACPI Global System Interrupt (GSI) value is a 32-bit one with
the MSB set.
That was interpreted as a negative integer and caused
acpi_pci_link_allocate_irq() to fail and acpi_irq_get_penalty() to
trigger an out-of-bounds array dereference (Lorenzo Pieralisi)"
* tag 'acpi-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCI: IRQ: Fix INTx GSIs signedness
|
|
Pull drm fixes from Dave Airlie:
"I missed the drm-rust fixes tree for last week, so this catches up on
that, along with amdgpu, and then some misc fixes across a few
drivers. I hadn't got an xe pull by the time I sent this, I suspect
one will arrive 10 mins after, but I don't think there is anything
that can't wait for next week.
Things seem to have picked up a little with people coming back from
holidays,
MAINTAINERS:
- Fix Nova GPU driver git links
- Fix typo in TYR driver entry preventing correct behavior of
scripts/get_maintainer.pl
- Exclude TYR driver from DRM MISC
nova-core:
- Correctly select RUST_FW_LOADER_ABSTRACTIONS to prevent build
errors
- Regenerate nova-core bindgen bindings with '--explicit-padding' to
avoid uninitialized bytes
- Fix length of received GSP messages, due to miscalculated message
payload size
- Regenerate bindings to derive MaybeZeroable
- Use a bindings alias to derive the firmware version
exynos:
- hdmi: replace system_wq with system_percpu_wq
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and
post-disable operations, as it breaks other bridge drivers
nouveau:
- Fix regression from fwsec s/r fix
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
amdgpu:
- Clang fixes
- Navi1x PCIe DPM fixes
- Ring reset fixes
- ISP suspend fix
- Analog DC fixes
- VPE fixes
- Mode1 reset fix
radeon:
- Variable sized array fix"
* tag 'drm-fixes-2026-01-09' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
Reapply "Revert "drm/amd: Skip power ungate during suspend for VPE""
drm/amd/display: Check NULL before calling dac_load_detection
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
drm/exynos: hdmi: replace use of system_wq with system_percpu_wq
drm/fb-helper: Fix vblank timeout during suspend/reset
PCI/VGA: Don't assume the only VGA device on a system is `boot_vga`
drm/amdgpu: Fix query for VPE block_type and ip_count
drm/amd/display: Add missing encoder setup to DACnEncoderControl
drm/amd/display: Correct color depth for SelectCRTC_Source
drm/amd/amdgpu: Fix SMU warning during isp suspend-resume
drm/amdgpu: always backup and reemit fences
drm/amdgpu: don't reemit ring contents more than once
drm/amd/pm: force send pcie parmater on navi1x
drm/amd/pm: fix wrong pcie parameter on navi1x
drm/radeon: Remove __counted_by from ClockInfoArray.clockInfo[]
drm/amd/display: Reduce number of arguments of dcn30's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dcn30's CalculatePrefetchSchedule()
drm/amd/display: Apply e4479aecf658 to dml
nouveau: don't attempt fwsec on sb on newer platforms
drm/tidss: Fix enable/disable order
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
|
|
The resctrl file system layer passes the domain, RMID, and event id to the
architecture to fetch an event counter.
Fetching a telemetry event counter requires additional information that is
private to the architecture, for example, the offset into MMIO space from
where the counter should be read.
Add mon_evt::arch_priv that architecture can use for any private data related
to the event. The resctrl filesystem initializes mon_evt::arch_priv when the
architecture enables the event and passes it back to architecture when needing
to fetch an event counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The telemetry event aggregators of the Intel Clearwater Forest CPU support two
RMID-based feature types: "energy" with GUID 0x26696143¹, and "perf" with
GUID 0x26557651².
The event counter offsets in an aggregator's MMIO space are arranged in groups
for each RMID.
E.g., the "energy" counters for GUID 0x26696143 are arranged like this:
MMIO offset:0x0000 Counter for RMID 0 PMT_EVENT_ENERGY
MMIO offset:0x0008 Counter for RMID 0 PMT_EVENT_ACTIVITY
MMIO offset:0x0010 Counter for RMID 1 PMT_EVENT_ENERGY
MMIO offset:0x0018 Counter for RMID 1 PMT_EVENT_ACTIVITY
...
MMIO offset:0x23F0 Counter for RMID 575 PMT_EVENT_ENERGY
MMIO offset:0x23F8 Counter for RMID 575 PMT_EVENT_ACTIVITY
After all counters there are three status registers that provide indications
of how many times an aggregator was unable to process event counts, the time
stamp for the most recent loss of data, and the time stamp of the most recent
successful update.
MMIO offset:0x2400 AGG_DATA_LOSS_COUNT
MMIO offset:0x2408 AGG_DATA_LOSS_TIMESTAMP
MMIO offset:0x2410 LAST_UPDATE_TIMESTAMP
Define event_group structures for both of these aggregator types and define
the events tracked by the aggregators in the file system code.
PMT_EVENT_ENERGY and PMT_EVENT_ACTIVITY are produced in fixed point format.
File system code must output as floating point values.
¹https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-ENERGY/cwf_aggregator.xml
²https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-PERF/cwf_aggregator.xml
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Add a new PERF_PKG resource and introduce package level scope for monitoring
telemetry events so that CPU hotplug notifiers can build domains at the
package granularity.
Use the physical package ID available via topology_physical_package_id()
to identify the monitoring domains with package level scope. This enables
user space to use:
/sys/devices/system/cpu/cpuX/topology/physical_package_id
to identify the monitoring domain a CPU is associated with.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during the
device_initcall() phase of Linux boot. The process finishes after the probe
functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system (when
included in /etc/fstab for automatic mount by systemd).
Add a hook for use by telemetry event enumeration and initialization and
run it once at the beginning of resctrl mount without any locks held.
The architecture is responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20260105191711.GBaVwON5nZn-uO6Sqg@fat_crate.local
|
