| Age | Commit message (Collapse) | Author |
|---|
|
commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream.
The current implemented mechanisms to mitigate data disclosure under
speculation mainly address stack and map value oob access from the
speculative domain. However, Piotr discovered that uninitialized BPF
stack is not protected yet, and thus old data from the kernel stack,
potentially including addresses of kernel structures, could still be
extracted from that 512 bytes large window. The BPF stack is special
compared to map values since it's not zero initialized for every
program invocation, whereas map values /are/ zero initialized upon
their initial allocation and thus cannot leak any prior data in either
domain. In the non-speculative domain, the verifier ensures that every
stack slot read must have a prior stack slot write by the BPF program
to avoid such data leaking issue.
However, this is not enough: for example, when the pointer arithmetic
operation moves the stack pointer from the last valid stack offset to
the first valid offset, the sanitation logic allows for any intermediate
offsets during speculative execution, which could then be used to
extract any restricted stack content via side-channel.
Given for unprivileged stack pointer arithmetic the use of unknown
but bounded scalars is generally forbidden, we can simply turn the
register-based arithmetic operation into an immediate-based arithmetic
operation without the need for masking. This also gives the benefit
of reducing the needed instructions for the operation. Given after
the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"), the aux->alu_limit already holds the final immediate value for
the offset register with the known scalar. Thus, a simple mov of the
immediate to AX register with using AX as the source for the original
instruction is sufficient and possible now in this case.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: fixed minor 4.14 conflict because of renamed function]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2805dca5107d5603f4bbc027e81e20d93476e96 upstream.
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bce130e7f392ddde8cfcb09927808ebd5f9c8669 upstream.
Added cfserl_release() function.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ]
RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.
This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083
...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...
This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.
This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.
When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...
Chrome OS cannot support RTL8156 until this is fixed.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream.
A new clang diagnostic (-Wsizeof-array-div) warns about the calculation
to determine the number of u32's in an array of unsigned longs.
Suppress warning by adding parentheses.
While looking at the above issue, noticed that the 'address' parameter
to hugetlb_fault_mutex_hash is no longer used. So, remove it from the
definition and all callers.
No functional change.
Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: David Bolvansky <david.bolvansky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1d5ff5651ea592c67054233b14b30bf4452999c upstream.
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0652f8bb44d6294eeeac06d703185357f25d50b upstream.
nfcmrvl_disconnect fails to free the hci_dev field in struct nci_dev.
Fix this by freeing hci_dev in nci_free_device.
BUG: memory leak
unreferenced object 0xffff888111ea6800 (size 1024):
comm "kworker/1:0", pid 19, jiffies 4294942308 (age 13.580s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 60 fd 0c 81 88 ff ff .........`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000004bc25d43>] kmalloc include/linux/slab.h:552 [inline]
[<000000004bc25d43>] kzalloc include/linux/slab.h:682 [inline]
[<000000004bc25d43>] nci_hci_allocate+0x21/0xd0 net/nfc/nci/hci.c:784
[<00000000c59cff92>] nci_allocate_device net/nfc/nci/core.c:1170 [inline]
[<00000000c59cff92>] nci_allocate_device+0x10b/0x160 net/nfc/nci/core.c:1132
[<00000000006e0a8e>] nfcmrvl_nci_register_dev+0x10a/0x1c0 drivers/nfc/nfcmrvl/main.c:153
[<000000004da1b57e>] nfcmrvl_probe+0x223/0x290 drivers/nfc/nfcmrvl/usb.c:345
[<00000000d506aed9>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
[<00000000f5009125>] driver_probe_device+0x84/0x100 drivers/base/dd.c:740
[<000000000ce658ca>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:846
[<000000007067d05f>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
[<00000000f8e13372>] __device_attach+0x122/0x250 drivers/base/dd.c:914
[<000000009cf68860>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
[<00000000359c965a>] device_add+0x5be/0xc30 drivers/base/core.c:3109
[<00000000086e4bd3>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2164
[<00000000ca036872>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<00000000d40d36f6>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<00000000bc632c92>] really_probe+0x159/0x4a0 drivers/base/dd.c:554
Reported-by: syzbot+19bcfc64a8df1318d1c3@syzkaller.appspotmail.com
Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 175e476b8cdf2a4de7432583b49c871345e4f8a1 upstream.
When a new table value was assigned, it was followed by a write memory
barrier. This ensured that all writes before this point would complete
before any writes after this point. However, to determine whether the
rules are unused, the sequence counter is read. To ensure that all
writes have been done before these reads, a full memory barrier is
needed, not just a write memory barrier. The same argument applies when
incrementing the counter, before the rules are read.
Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic
reported in cc00bcaa5899 (which is still present), while still
maintaining the same speed of replacing tables.
The smb_mb() barriers potentially slow the packet path, however testing
has shown no measurable change in performance on a 4-core MIPS64
platform.
Fixes: 7f5c6d4f665b ("netfilter: get rid of atomic ops in fast path")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Ported to stable, affected barrier is added by d3d40f237480abf3268956daf18cdc56edd32834 in mainline]
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
References:
[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream.
As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe032005 ("block: unalign
call_single_data in struct request").
The result is a violation of the calling conventions that clang correctly
points out:
block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
smp_call_function_single_async(cpu, &rq->csd);
It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org
[nc: Fix conflicts]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]
Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.
Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.
Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.
Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ]
Some kernel-internal ASYNC flags have been superseded by tty-port flags
and should no longer be used by kernel drivers.
Fix the misspelled "__KERNEL__" compile guards which failed their sole
purpose to break out-of-tree drivers that have not yet been updated.
Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 ]
We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98)
[<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24)
r4:b6700140
[<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40)
[<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4)
r5:b6700180 r4:b6700100
[<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60)
r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec)
r5:b117ad94 r4:b163dc10
[<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0)
r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8)
Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.
Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III <wak@google.com>
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream.
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Example crash call trace:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe3/0x144 lib/dump_stack.c:118
print_address_description+0x67/0x22a mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report mm/kasan/report.c:412 [inline]
kasan_report+0x251/0x28f mm/kasan/report.c:396
hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free mm/kasan/kasan.c:521 [inline]
__kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
slab_free mm/slub.c:3009 [inline]
kfree+0x182/0x21e mm/slub.c:3972
hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 262e6ae7081df304fc625cf368d5c2cbba2bb991 upstream.
If a TAINT_PROPRIETARY_MODULE exports symbol, inherit the taint flag
for all modules importing these symbols, and don't allow loading
symbols from TAINT_PROPRIETARY_MODULE modules if the module previously
imported gplonly symbols. Add a anti-circumvention devices so people
don't accidentally get themselves into trouble this way.
Comment from Greg:
"Ah, the proven-to-be-illegal "GPL Condom" defense :)"
[jeyu: pr_info -> pr_err and pr_warn as per discussion]
Link: http://lore.kernel.org/r/20200730162957.GA22469@lst.de
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef1dac6021cc8ec5de02ce31722bf26ac4ed5523 upstream.
Report the GPLONLY status through a new argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd8732cdcc37d7077c4fa2c966b748c0662b607e upstream.
Use the same spelling variant as the rest of the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a54e04914c211b5678602a46b3ede5d82ec1327d upstream.
each_symbol_section is only used inside of module.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 773110470e2fa3839523384ae014f8a723c4d178 upstream.
find_symbol is only used in module.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ef5264de773279b9f23b6cc8afb5addb30e970b upstream.
ref_module isn't used anywhere outside of module.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7c6e405e171fb33990a12ecfd14e6500d9e5cf2 upstream.
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c4d57c22ac65bd503716062a06fad55a01569cac ]
On all newer bq27xxx ICs, the AveragePower register contains a signed
value; in addition to handling the raw value as unsigned, the driver
code also didn't convert it to µW as expected.
At least for the BQ28Z610, the reference manual incorrectly states that
the value is in units of 1mW and not 10mW. I have no way of knowing
whether the manuals of other supported ICs contain the same error, or if
there are models that actually use 1mW. At least, the new code shouldn't
be *less* correct than the old version for any device.
power_avg is removed from the cache structure, se we don't have to
extend it to store both a signed value and an error code. Always getting
an up-to-date value may be desirable anyways, as it avoids inconsistent
current and power readings when switching between charging and
discharging.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83681f2bebb34dbb3f03fecd8f570308ab8b7c2c ]
Given that crypto_alloc_tfm() may return ERR pointers, and to avoid
crashes on obscure error paths where such pointers are presented to
crypto_destroy_tfm() (such as [0]), add an ERR_PTR check there
before dereferencing the second argument as a struct crypto_tfm
pointer.
[0] https://lore.kernel.org/linux-crypto/000000000000de949705bc59e0f6@google.com/
Reported-by: syzbot+12cf5fbfdeba210a89dd@syzkaller.appspotmail.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1a1c130ab7575498eed5bcf7220037ae09cd1f8a upstream.
The following problem has been reported by George Kennedy:
Since commit 7fef431be9c9 ("mm/page_alloc: place pages to tail
in __free_pages_core()") the following use after free occurs
intermittently when ACPI tables are accessed.
BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
Read of size 4 at addr ffff8880be453004 by task swapper/0/1
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1
Call Trace:
dump_stack+0xf6/0x158
print_address_description.constprop.9+0x41/0x60
kasan_report.cold.14+0x7b/0xd4
__asan_report_load_n_noabort+0xf/0x20
ibft_init+0x134/0xc49
do_one_initcall+0xc4/0x3e0
kernel_init_freeable+0x5af/0x66b
kernel_init+0x16/0x1d0
ret_from_fork+0x22/0x30
ACPI tables mapped via kmap() do not have their mapped pages
reserved and the pages can be "stolen" by the buddy allocator.
Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.
In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.
The other architectures using ACPI should not be affected by this
change.
Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/
Reported-by: George Kennedy <george.kennedy@oracle.com>
Tested-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 955dc68cb9b23b42999cafe6df3684309bc686c6 upstream.
Add a generic netlink family for NCSI. This supports three commands;
NCSI_CMD_PKG_INFO which returns information on packages and their
associated channels, NCSI_CMD_SET_INTERFACE which allows a specific
package or package/channel combination to be set as the preferred
choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a14587dfc5ad2312dabdd42a610d80ecd0dc8bea ]
The cited commit wrongly placed log_max_flow_counter field of
mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended
placement.
Fixes: 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3a87571f0ffc51ba3bf3ecdb6032861d0154b164 ]
This fixes following syzbot report:
UBSAN: shift-out-of-bounds in ./include/net/red.h:237:23
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 1 PID: 8418 Comm: syz-executor170 Not tainted 5.12.0-rc4-next-20210324-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
red_set_parms include/net/red.h:237 [inline]
choke_change.cold+0x3c/0xc8 net/sched/sch_choke.c:414
qdisc_create+0x475/0x12f0 net/sched/sch_api.c:1247
tc_modify_qdisc+0x4c8/0x1a50 net/sched/sch_api.c:1663
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43f039
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdfa725168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043f039
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 0000000000403020 R08: 0000000000400488 R09: 0000000000400488
R10: 0000000000400488 R11: 0000000000000246 R12: 00000000004030b0
R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488
Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 61431a5907fc36d0738e9a547c7e1556349a03e9 upstream.
Commit 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
added a call to dev_parse_header_protocol() but mac_header is not yet set.
This means that eth_hdr() reads complete garbage, and syzbot complained about it [1]
This patch resets mac_header earlier, to get more coverage about this change.
Audit of virtio_net_hdr_to_skb() callers shows that this change should be safe.
[1]
BUG: KASAN: use-after-free in eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
Read of size 2 at addr ffff888017a6200b by task syz-executor313/8409
CPU: 1 PID: 8409 Comm: syz-executor313 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
eth_header_parse_protocol+0xdc/0xe0 net/ethernet/eth.c:282
dev_parse_header_protocol include/linux/netdevice.h:3177 [inline]
virtio_net_hdr_to_skb.constprop.0+0x99d/0xcd0 include/linux/virtio_net.h:83
packet_snd net/packet/af_packet.c:2994 [inline]
packet_sendmsg+0x2325/0x52b0 net/packet/af_packet.c:3031
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
sock_no_sendpage+0xf3/0x130 net/core/sock.c:2860
kernel_sendpage.part.0+0x1ab/0x350 net/socket.c:3631
kernel_sendpage net/socket.c:3628 [inline]
sock_sendpage+0xe5/0x140 net/socket.c:947
pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
do_splice+0xb7e/0x1940 fs/splice.c:1079
__do_splice+0x134/0x250 fs/splice.c:1144
__do_sys_splice fs/splice.c:1350 [inline]
__se_sys_splice fs/splice.c:1332 [inline]
__x64_sys_splice+0x198/0x250 fs/splice.c:1332
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Balazs Nemeth <bnemeth@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ]
Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case. This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).
Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0b3d6e6f2dd0a7b697b1aa8c167265908940624b upstream.
Since commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") memcg dirty and writeback counters are managed
as:
1) per-memcg per-cpu values in range of [-32..32]
2) per-memcg atomic counter
When a per-cpu counter cannot fit in [-32..32] it's flushed to the
atomic. Stat readers only check the atomic. Thus readers such as
balance_dirty_pages() may see a nontrivial error margin: 32 pages per
cpu.
Assuming 100 cpus:
4k x86 page_size: 13 MiB error per memcg
64k ppc page_size: 200 MiB error per memcg
Considering that dirty+writeback are used together for some decisions the
errors double.
This inaccuracy can lead to undeserved oom kills. One nasty case is
when all per-cpu counters hold positive values offsetting an atomic
negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32).
balance_dirty_pages() only consults the atomic and does not consider
throttling the next n_cpu*32 dirty pages. If the file_lru is in the
13..200 MiB range then there's absolutely no dirty throttling, which
burdens vmscan with only dirty+writeback pages thus resorting to oom
kill.
It could be argued that tiny containers are not supported, but it's more
subtle. It's the amount the space available for file lru that matters.
If a container has memory.max-200MiB of non reclaimable memory, then it
will also suffer such oom kills on a 100 cpu machine.
The following test reliably ooms without this patch. This patch avoids
oom kills.
$ cat test
mount -t cgroup2 none /dev/cgroup
cd /dev/cgroup
echo +io +memory > cgroup.subtree_control
mkdir test
cd test
echo 10M > memory.max
(echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo)
(echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100)
$ cat memcg-writeback-stress.c
/*
* Dirty pages from all but one cpu.
* Clean pages from the non dirtying cpu.
* This is to stress per cpu counter imbalance.
* On a 100 cpu machine:
* - per memcg per cpu dirty count is 32 pages for each of 99 cpus
* - per memcg atomic is -99*32 pages
* - thus the complete dirty limit: sum of all counters 0
* - balance_dirty_pages() only sees atomic count -99*32 pages, which
* it max()s to 0.
* - So a workload can dirty -99*32 pages before balance_dirty_pages()
* cares.
*/
#define _GNU_SOURCE
#include <err.h>
#include <fcntl.h>
#include <sched.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
static char *buf;
static int bufSize;
static void set_affinity(int cpu)
{
cpu_set_t affinity;
CPU_ZERO(&affinity);
CPU_SET(cpu, &affinity);
if (sched_setaffinity(0, sizeof(affinity), &affinity))
err(1, "sched_setaffinity");
}
static void dirty_on(int output_fd, int cpu)
{
int i, wrote;
set_affinity(cpu);
for (i = 0; i < 32; i++) {
for (wrote = 0; wrote < bufSize; ) {
int ret = write(output_fd, buf+wrote, bufSize-wrote);
if (ret == -1)
err(1, "write");
wrote += ret;
}
}
}
int main(int argc, char **argv)
{
int cpu, flush_cpu = 1, output_fd;
const char *output;
if (argc != 2)
errx(1, "usage: output_file");
output = argv[1];
bufSize = getpagesize();
buf = malloc(getpagesize());
if (buf == NULL)
errx(1, "malloc failed");
output_fd = open(output, O_CREAT|O_RDWR);
if (output_fd == -1)
err(1, "open(%s)", output);
for (cpu = 0; cpu < get_nprocs(); cpu++) {
if (cpu != flush_cpu)
dirty_on(output_fd, cpu);
}
set_affinity(flush_cpu);
if (fsync(output_fd))
err(1, "fsync(%s)", output);
if (close(output_fd))
err(1, "close(%s)", output);
free(buf);
}
Make balance_dirty_pages() and wb_over_bg_thresh() work harder to
collect exact per memcg counters. This avoids the aforementioned oom
kills.
This does not affect the overhead of memory.stat, which still reads the
single atomic counter.
Why not use percpu_counter? memcg already handles cpus going offline, so
no need for that overhead from percpu_counter. And the percpu_counter
spinlocks are more heavyweight than is required.
It probably also makes sense to use exact dirty and writeback counters
in memcg oom reports. But that is saved for later.
Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> [4.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fe6bdfc8e1e131720abbe77a2eb990c94c9024cb upstream.
Commit e27be240df53 ("mm: memcg: make sure memory.events is uptodate
when waking pollers") converted most of memcg event counters to
per-memcg atomics, which made them less confusing for a user. The
"oom_kill" counter remained untouched, so now it behaves differently
than other counters (including "oom"). This adds nothing but confusion.
Let's fix this by adding the MEMCG_OOM_KILL event, and follow the
MEMCG_OOM approach.
This also removes a hack from count_memcg_event_mm(), introduced earlier
specially for the OOM_KILL counter.
[akpm@linux-foundation.org: fix for droppage of memcg-replace-mm-owner-with-mm-memcg.patch]
Link: http://lkml.kernel.org/r/20180508124637.29984-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[fllinden@amazon.com: backport to 4.14, minor contextual changes]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
same cacheline
commit e81bf9793b1861d74953ef041b4f6c7faecc2dbd upstream.
The LKP robot found a 27% will-it-scale/page_fault3 performance
regression regarding commit e27be240df53("mm: memcg: make sure
memory.events is uptodate when waking pollers").
What the test does is:
1 mkstemp() a 128M file on a tmpfs;
2 start $nr_cpu processes, each to loop the following:
2.1 mmap() this file in shared write mode;
2.2 write 0 to this file in a PAGE_SIZE step till the end of the file;
2.3 unmap() this file and repeat this process.
3 After 5 minutes, check how many loops they managed to complete, the
higher the better.
The commit itself looks innocent enough as it merely changed some event
counting mechanism and this test didn't trigger those events at all.
Perf shows increased cycles spent on accessing root_mem_cgroup->stat_cpu
in count_memcg_event_mm()(called by handle_mm_fault()) and in
__mod_memcg_state() called by page_add_file_rmap(). So it's likely due
to the changed layout of 'struct mem_cgroup' that either make stat_cpu
falling into a constantly modifying cacheline or some hot fields stop
being in the same cacheline.
I verified this by moving memory_events[] back to where it was:
: --- a/include/linux/memcontrol.h
: +++ b/include/linux/memcontrol.h
: @@ -205,7 +205,6 @@ struct mem_cgroup {
: int oom_kill_disable;
:
: /* memory.events */
: - atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS];
: struct cgroup_file events_file;
:
: /* protect arrays of thresholds */
: @@ -238,6 +237,7 @@ struct mem_cgroup {
: struct mem_cgroup_stat_cpu __percpu *stat_cpu;
: atomic_long_t stat[MEMCG_NR_STAT];
: atomic_long_t events[NR_VM_EVENT_ITEMS];
: + atomic_long_t memory_events[MEMCG_NR_MEMORY_EVENTS];
:
: unsigned long socket_pressure;
And performance restored.
Later investigation found that as long as the following 3 fields
moving_account, move_lock_task and stat_cpu are in the same cacheline,
performance will be good. To avoid future performance surprise by other
commits changing the layout of 'struct mem_cgroup', this patch makes
sure the 3 fields stay in the same cacheline.
One concern of this approach is, moving_account and move_lock_task could
be modified when a process changes memory cgroup while stat_cpu is a
always read field, it might hurt to place them in the same cacheline. I
assume it is rare for a process to change memory cgroup so this should
be OK.
Link: https://lkml.kernel.org/r/20180528114019.GF9904@yexl-desktop
Link: http://lkml.kernel.org/r/20180601071115.GA27302@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e27be240df53f1a20c659168e722b5d9f16cc7f4 upstream.
Commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.
For memory.stat this is acceptable. But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.
Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.
This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters. That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.
[hannes@cmpxchg.org: "array subscript is above array bounds"]
Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c3cc39118c3610eb6ab4711bc624af7fc48a35fe upstream.
After commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting"), we observed slowly upward creeping NR_WRITEBACK
counts over the course of several days, both the per-memcg stats as well
as the system counter in e.g. /proc/meminfo.
The conversion from full per-cpu stat counts to per-cpu cached atomic
stat counts introduced an irq-unsafe RMW operation into the updates.
Most stat updates come from process context, but one notable exception
is the NR_WRITEBACK counter. While writebacks are issued from process
context, they are retired from (soft)irq context.
When writeback completions interrupt the RMW counter updates of new
writebacks being issued, the decs from the completions are lost.
Since the global updates are routed through the joint lruvec API, both
the memcg counters as well as the system counters are affected.
This patch makes the joint stat and event API irq safe.
Link: http://lkml.kernel.org/r/20180203082353.17284-1-hannes@cmpxchg.org
Fixes: a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e323d865b36134e8c5c82c834df89109a5c60dab upstream.
iproute2 package is well behaved, but malicious user space can
provide illegal shift values and trigger UBSAN reports.
Add stab parameter to red_check_params() to validate user input.
syzbot reported:
UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18
shift exponent 111 is too large for 64-bit type 'long unsigned int'
CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x141/0x1d7 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
red_calc_qavg_from_idle_time include/net/red.h:312 [inline]
red_calc_qavg include/net/red.h:353 [inline]
choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221
__dev_xmit_skb net/core/dev.c:3837 [inline]
__dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150
neigh_hh_output include/net/neighbour.h:499 [inline]
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117
__ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
__ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161
ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192
NF_HOOK_COND include/linux/netfilter.h:290 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215
dst_output include/net/dst.h:448 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
NF_HOOK include/linux/netfilter.h:295 [inline]
ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320
inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135
dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138
dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535
dccp_finish_passive_close net/dccp/proto.c:123 [inline]
dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118
dccp_terminate_connection net/dccp/proto.c:958 [inline]
dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028
inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478
__sock_release+0xcd/0x280 net/socket.c:599
sock_close+0x18/0x20 net/socket.c:1258
__fput+0x288/0x920 fs/file_table.c:280
task_work_run+0xdd/0x1a0 kernel/task_work.c:140
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream.
When a non-initial netns is destroyed, the usual policy is to delete
all virtual network interfaces contained, but move physical interfaces
back to the initial netns. This keeps the physical interface visible
on the system.
CAN devices are somewhat special, as they define rtnl_link_ops even
if they are physical devices. If a CAN interface is moved into a
non-initial netns, destroying that netns lets the interface vanish
instead of moving it back to the initial netns. default_device_exit()
skips CAN interfaces due to having rtnl_link_ops set. Reproducer:
ip netns add foo
ip link set can0 netns foo
ip netns delete foo
WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60
CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1
Workqueue: netns cleanup_net
[<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14)
[<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8)
[<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114)
[<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac)
[<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60)
[<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380)
[<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438)
[<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8)
[<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c)
[<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c)
To properly restore physical CAN devices to the initial netns on owning
netns exit, introduce a flag on rtnl_link_ops that can be set by drivers.
For CAN devices setting this flag, default_device_exit() considers them
non-virtual, applying the usual namespace move.
The issue was introduced in the commit mentioned below, as at that time
CAN devices did not have a dellink() operation.
Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.")
Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 291da9d4a9eb3a1cb0610b7f4480f5b52b1825e7 upstream.
If CONFIG_DEBUG_LOCK_ALLOC=n then mutex_lock_io_nested() maps to
mutex_lock() which is clearly wrong because mutex_lock() lacks the
io_schedule_prepare()/finish() invocations.
Map it to mutex_lock_io().
Fixes: f21860bac05b ("locking/mutex, sched/wait: Fix the mutex_lock_io_nested() define")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/878s6fshii.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eb50aaf960e3bedfef79063411ffd670da94b84b ]
The decrementation of acpi_device_bus_id->instance_no
in acpi_device_del() is incorrect, because it may cause
a duplicate instance number to be allocated next time
a device with the same acpi_device_bus_id is added.
Replace above mentioned approach by using IDA framework.
While at it, define the instance range to be [0, 4096).
Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device")
Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd4fa1dae9f4847cc1fd78ca468ad69e16e5db3e ]
macvlan_count_rx() can be called from process context, it is thus
necessary to disable preemption before calling u64_stats_update_begin()
syzbot was able to spot this on 32bit arch:
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline]
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269
Modules linked in:
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: ARM-Versatile Express
Workqueue: events macvlan_process_broadcast
Backtrace:
[<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4
[<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline])
[<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231)
r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0
[<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605)
r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4
r7:0000010f
[<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628)
r7:81363f70 r6:0000010f r5:83018e50 r4:00000000
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline])
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269)
r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291)
r5:89802300 r4:8a927740
[<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317)
r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000
r4:89802840
[<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275)
r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80
r4:8a86d43c
[<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421)
r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40
r4:898dac80
[<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292)
r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40
r4:8a97bd00
[<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158)
Exception stack(0x8a9c7fb0 to 0x8a9c7ff8)
Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d5b0e0677bfd5efd17c5bbb00156931f0d41cb85 ]
Jakub reported that:
static struct net_device *rtl8139_init_board(struct pci_dev *pdev)
{
...
u64_stats_init(&tp->rx_stats.syncp);
u64_stats_init(&tp->tx_stats.syncp);
...
}
results in lockdep getting confused between the RX and TX stats lock.
This is because u64_stats_init() is an inline calling seqcount_init(),
which is a macro using a static variable to generate a lockdep class.
By wrapping that in an inline, we negate the effect of the macro and
fold the static key variable, hence the confusion.
Fix by also making u64_stats_init() a macro for the case where it
matters, leaving the other case an inline for argument validation
etc.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Debugged-by: "Ahmed S. Darwish" <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Erhard F." <erhard_f@mailbox.org>
Link: https://lkml.kernel.org/r/YEXicy6+9MksdLZh@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5abbe51a526253b9f003e9a0a195638dc882d660 upstream.
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81c7462883b0cc0a4eeef0687f80ad5b5baee5f6 upstream.
Replace hardcoded maximum USB string length (126 bytes) by definition
"USB_MAX_STRING_LEN".
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1592471618-29428-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 546aa0e4ea6ed81b6c51baeebc4364542fa3f3a7 upstream.
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE. It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command. The reason for this
behavior isn't clear, although it's not hard to make some guesses.
At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).
To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set. This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.
Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices. However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval. Changing the driver's
behavior is safer and has minimal overhead.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 149fc787353f65b7e72e05e7b75d34863266c3e2 ]
Fix a sparse warning by using rcu_dereference(). Technically this is a
bug and a sufficiently aggressive compiler could reload the `real_parent'
pointer outside the protection of the rcu lock (and access freed memory),
but I think it's pretty unlikely to happen.
Link: https://lkml.kernel.org/r/20210221194207.1351703-1-willy@infradead.org
Fixes: b18dc5f291c0 ("mm, oom: skip vforked tasks from being selected")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cbf78d85079cee662c45749ef4f744d41be85d48 ]
With clang-13, some functions only get partially inlined, with a
specialized version referring to a global variable. This triggers a
harmless build-time check for the intel-rng driver:
WARNING: modpost: drivers/char/hw_random/intel-rng.o(.text+0xe): Section mismatch in reference from the function stop_machine() to the function .init.text:intel_rng_hw_init()
The function stop_machine() references
the function __init intel_rng_hw_init().
This is often because stop_machine lacks a __init
annotation or the annotation of intel_rng_hw_init is wrong.
In this instance, an easy workaround is to force the stop_machine()
function to be inline, along with related interfaces that did not show the
same behavior at the moment, but theoretically could.
The combination of the two patches listed below triggers the behavior in
clang-13, but individually these commits are correct.
Link: https://lkml.kernel.org/r/20210225130153.1956990-1-arnd@kernel.org
Fixes: fe5595c07400 ("stop_machine: Provide stop_machine_cpuslocked()")
Fixes: ee527cd3a20c ("Use stop_machine_run in the Intel RNG driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
setting skb ownership
commit e940e0895a82c6fbaa259f2615eb52b57ee91a7e upstream.
There are two ref count variables controlling the free()ing of a socket:
- struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
- struct sock::sk_wmem_alloc - which accounts the memory allocated by
the skbs in the send path.
In case there are still TX skbs on the fly and the socket() is closed,
the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack
clones an "echo" skb, calls sock_hold() on the original socket and
references it. This produces the following back trace:
| WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134
| refcount_t: addition on 0; use-after-free.
| Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E)
| CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203
| Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
| Backtrace:
| [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220
| [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8)
| [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
| [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2
| [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540
| [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50)
| [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c)
| [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600
| [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00
| [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600
| [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400
| [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534)
To fix this problem, only set skb ownership to sockets which have still
a ref count > 0.
Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Andre Naujoks <nautsch2@gmail.com>
Link: https://lore.kernel.org/r/20210226092456.27126-1-o.rempel@pengutronix.de
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 924a9bc362a5223cd448ca08c3dde21235adc310 upstream.
For gso packets, virtio_net_hdr_set_proto sets the protocol (if it isn't
set) based on the type in the virtio net hdr, but the skb could contain
anything since it could come from packet_snd through a raw socket. If
there is a mismatch between what virtio_net_hdr_set_proto sets and
the actual protocol, then the skb could be handled incorrectly later
on.
An example where this poses an issue is with the subsequent call to
skb_flow_dissect_flow_keys_basic which relies on skb->protocol being set
correctly. A specially crafted packet could fool
skb_flow_dissect_flow_keys_basic preventing EINVAL to be returned.
Avoid blindly trusting the information provided by the virtio net header
by checking that the protocol in the packet actually matches the
protocol set by virtio_net_hdr_set_proto. Note that since the protocol
is only checked if skb->dev implements header_ops->parse_protocol,
packets from devices without the implementation are not checked at this
stage.
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e78b2915517e8fcadb1bc130ad6aeac7099e510c upstream.
Introduce a new optional header_ops callback called parse_protocol and a
wrapper function dev_parse_header_protocol, similar to dev_parse_header.
The new callback's purpose is to extract the protocol number from the L2
header, the format of which is known to the driver, but not to the upper
layers of the stack.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c33cb0020ee6dd96cc9976d6085a7d8422f6dbed upstream.
Apparently, <linux/netfilter/nfnetlink_cthelper.h> and
<linux/netfilter/nfnetlink_acct.h> could not be included into the same
compilation unit because of a cut-and-paste typo in the former header.
Fixes: 12f7a505331e6 ("netfilter: add user-space connection tracking helper infrastructure")
Cc: <stable@vger.kernel.org> # v3.6
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
