| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"This contains a series I originally wrote and that Eric brought over
the finish line. It moves out the i_crypt_info and i_verity_info
pointers out of 'struct inode' and into the fs-specific part of the
inode.
So now the few filesytems that actually make use of this pay the price
in their own private inode storage instead of forcing it upon every
user of struct inode.
The pointer for the crypt and verity info is simply found by storing
an offset to its address in struct fsverity_operations and struct
fscrypt_operations. This shrinks struct inode by 16 bytes.
I hope to move a lot more out of it in the future so that struct inode
becomes really just about very core stuff that we need, much like
struct dentry and struct file, instead of the dumping ground it has
become over the years.
On top of this are a various changes associated with the ongoing inode
lifetime handling rework that multiple people are pushing forward:
- Stop accessing inode->i_count directly in f2fs and gfs2. They
simply should use the __iget() and iput() helpers
- Make the i_state flags an enum
- Rework the iput() logic
Currently, if we are the last iput, and we have the I_DIRTY_TIME
bit set, we will grab a reference on the inode again and then mark
it dirty and then redo the put. This is to make sure we delay the
time update for as long as possible
We can rework this logic to simply dec i_count if it is not 1, and
if it is do the time update while still holding the i_count
reference
Then we can replace the atomic_dec_and_lock with locking the
->i_lock and doing atomic_dec_and_test, since we did the
atomic_add_unless above
- Add an icount_read() helper and convert everyone that accesses
inode->i_count directly for this purpose to use the helper
- Expand dump_inode() to dump more information about an inode helping
in debugging
- Add some might_sleep() annotations to iput() and associated
helpers"
* tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add might_sleep() annotation to iput() and more
fs: expand dump_inode()
inode: fix whitespace issues
fs: add an icount_read helper
fs: rework iput logic
fs: make the i_state flags an enum
fs: stop accessing ->i_count directly in f2fs and gfs2
fsverity: check IS_VERITY() in fsverity_cleanup_inode()
fs: remove inode::i_verity_info
btrfs: move verity info pointer to fs-specific part of inode
f2fs: move verity info pointer to fs-specific part of inode
ext4: move verity info pointer to fs-specific part of inode
fsverity: add support for info in fs-specific part of inode
fs: remove inode::i_crypt_info
ceph: move crypt info pointer to fs-specific part of inode
ubifs: move crypt info pointer to fs-specific part of inode
f2fs: move crypt info pointer to fs-specific part of inode
ext4: move crypt info pointer to fs-specific part of inode
fscrypt: add support for info in fs-specific part of inode
fscrypt: replace raw loads of info pointer with helper function
|
|
Show the FL_RECLAIM flag symbolically in tracepoints.
Fixes: bb0a55bb7148 ("nfs: don't allow reexport reclaims")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/20250903-filelock-v1-1-f2926902962d@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Instead of doing direct access to ->i_count, add a helper to handle
this. This will make it easier to convert i_count to a refcount later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/9bc62a84c6b9d6337781203f60837bd98fbc4a96.1756222464.git.josef@toxicpanda.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a new struct file_lease and move the lease-specific fields from
struct file_lock to it. Convert the appropriate API calls to take
struct file_lease instead, and convert the callers to use them.
There is zero overlap between the lock manager operations for file
locks and the ones for file leases, so split the lease-related
operations off into a new lease_manager_operations struct.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-47-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both locks and leases deal with fl_blocker. Switch the fl_blocker
pointer in struct file_lock_core to point to the file_lock_core of the
blocker instead of a file_lock structure.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-26-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert fs/locks.c to access fl_core fields direcly rather than using
the backward-compatibility macros. Most of this was done with
coccinelle, with a few by-hand fixups.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-18-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In later patches we're going to introduce some macros with names that
clash with fields here. To prevent problems building, just rename the
fields in the trace entry structures.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240131-flsplit-v3-2-c6129007ee8d@kernel.org
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Clean up: %p adds its own 0x already.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Now that check_conflicting_open uses inode->i_readcount instead of
the dentry->d_count to detect opens for read, revise the tracepoint
to display that value instead.
Also, fl is never NULL, so no need to check for that in the fast
assign section.
Cc: Amir Goldstein <amir73il@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
struct file lock contains an 'fl_next' pointer which
is used to point to the lock that this request is blocked
waiting for. So rename it to fl_blocker.
The fl_blocked list_head in an active lock is the head of a list of
blocked requests. In a request it is a node in that list.
These are two distinct uses, so replace with two list_heads
with different names.
fl_blocked_requests is the head of a list of blocked requests
fl_blocked_member is a node in a member of that list.
The two different list_heads are never used at the same time, but that
will change in a future patch.
Note that a tracepoint is changed to report fl_blocker instead
of fl_next.
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add some tracepoints around the POSIX locking code. These were useful
when tracking down problems when handling the race between setlk and
close.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
|
|
Add some more helpful info to make it easier to determine why a lease
wasn't granted.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
|
|
Ensure that it's OK to pass in a NULL file_lock double pointer on
a F_UNLCK request and convert the vfs_setlease F_UNLCK callers to
do just that.
Finally, turn the BUG_ON in generic_setlease into a WARN_ON_ONCE
with an error return. That's a problem we can handle without
crashing the box if it occurs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
v2: add a __break_lease tracepoint for non-blocking case
Recently, I needed these to help track down a softlockup when recalling a
delegation, but they might be helpful in other situations as well.
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
|
