| Age | Commit message (Collapse) | Author |
|---|
|
pidfs and nsfs recently gained support for encode/decode of file handles
via name_to_handle_at(2)/open_by_handle_at(2).
These special kernel filesystems have custom ->open() and ->permission()
export methods, which nfsd does not respect and it was never meant to be
used for exporting those filesystems by nfsd.
Therefore, do not allow nfsd to export filesystems with custom ->open()
or ->permission() methods.
Fixes: b3caba8f7a34a ("pidfs: implement file handle support")
Fixes: 5222470b2fbb3 ("nsfs: support file handles")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260129100212.49727-3-amir73il@gmail.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pidfs and nsfs recently gained support for encode/decode of file handles
via name_to_handle_at(2)/open_by_handle_at(2).
These special kernel filesystems have custom ->open() and ->permission()
export methods, which nfsd does not respect and it was never meant to be
used for exporting those filesystems by nfsd.
Update kernel-doc comments to express the fact the those methods are for
open_by_handle(2) system only and not compatible with nfsd.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260129100212.49727-2-amir73il@gmail.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs-verity introduced inode flag for inodes with enabled fs-verity on
them. This patch adds FS_XFLAG_VERITY file attribute which can be
retrieved with FS_IOC_FSGETXATTR ioctl() and file_getattr() syscall.
This flag is read-only and can not be set with corresponding set ioctl()
and file_setattr(). The FS_IOC_SETFLAGS requires file to be opened for
writing which is not allowed for verity files. The FS_IOC_FSSETXATTR and
file_setattr() clears this flag from the user input.
As this is now common flag for both flag interfaces (flags/xflags) add
it to overlapping flags list to exclude it from overwrite.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://patch.msgid.link/20260126115658.27656-2-aalbersh@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The language definition was extracted from the new
draft-ietf-nfsv4-posix-acls specification. This ensures good
constant and type name alignment between the spec and the Linux
kernel source code, and brings in some basic XDR utilities for
handling NFSv4 POSIX draft ACLs.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
XDR specification files can contain lines prefixed with '%' that
pass through unchanged to generated output. Traditional rpcgen
removes the '%' and emits the remainder verbatim, allowing direct
insertion of C includes, pragma directives, or other language-
specific content into the generated code.
Until now, xdrgen silently discarded these lines during parsing.
This prevented specifications from including necessary headers or
preprocessor directives that might be required for the generated
code to compile correctly.
The grammar now captures pass-through lines instead of ignoring
them. A new AST node type represents pass-through content, and
the AST transformer strips the leading '%' character. Definition
and source generators emit pass-through content in document order,
preserving the original placement within the specification.
This brings xdrgen closer to feature parity with traditional
rpcgen while maintaining the existing document-order processing
model.
Existing generated xdrgen source code has been regenerated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Three architectures (x86, aarch64, riscv) have support for indirect
branch tracking feature in a very similar fashion. On a very high
level, indirect branch tracking is a CPU feature where CPU tracks
branches which use a memory operand to transfer control. As part of
this tracking, during an indirect branch, the CPU expects a landing
pad instruction on the target PC, and if not found, the CPU raises
some fault (architecture-dependent).
x86 landing pad instr - 'ENDBRANCH'
arch64 landing pad instr - 'BTI'
riscv landing instr - 'lpad'
Given that three major architectures have support for indirect branch
tracking, this patch creates architecture-agnostic 'prctls' to allow
userspace to control this feature. They are:
- PR_GET_INDIR_BR_LP_STATUS: Get the current configured status for indirect
branch tracking.
- PR_SET_INDIR_BR_LP_STATUS: Set the configuration for indirect branch
tracking.
The following status options are allowed:
- PR_INDIR_BR_LP_ENABLE: Enables indirect branch tracking on user
thread.
- PR_INDIR_BR_LP_DISABLE: Disables indirect branch tracking on user
thread.
- PR_LOCK_INDIR_BR_LP_STATUS: Locks configured status for indirect branch
tracking for user thread.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-13-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description, code comments]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek soc driver updates
This adds:
- A socinfo entry for the MT8371 Genio 520 SoC
- Support for the Dynamic Voltage and Frequency Scaling
Resource Controller (DVFSRC) version 4, found in the
new MediaTek Kompanio Ultra (MT8196) SoC
- Initial support for the CMDQ mailbox found in the MT8196.
- A memory leak fix in the MediaTek SVS driver's debug ops.
* tag 'mtk-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
soc: mediatek: mtk-dvfsrc: Rework bandwidth calculations
soc: mediatek: mtk-dvfsrc: Get and Enable DVFSRC clock
soc: mediatek: mtk-dvfsrc: Add support for DVFSRCv4 and MT8196
soc: mediatek: mtk-dvfsrc: Write bandwidth to EMI DDR if present
soc: mediatek: mtk-dvfsrc: Add a new callback for calc_dram_bw
soc: mediatek: mtk-dvfsrc: Add and propagate DVFSRC bandwidth type
soc: mediatek: mtk-dvfsrc: Change error check for DVFSRCv4 START cmd
dt-bindings: soc: mediatek: dvfsrc: Document clock
soc: mediatek: mtk-socinfo: Add entry for MT8371AV/AZA Genio 520
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers
Apple SoC driver updates for 6.20
- Add a poweroff function to the RTKit library which will be required
for the first USB4/Thunderbolt series I hope to submit next cycle.
* tag 'apple-soc-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
soc: apple: rtkit: Add function to poweroff
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rename the helper is_dot_dotdot() into the name_ namespace
and add complementary helpers to check for dot and dotdot
names individually.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260128132406.23768-3-amir73il@gmail.com
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the first step to replace cpu (partial) slabs with sheaves, enable
sheaves for almost all caches. Treat args->sheaf_capacity as a minimum,
and calculate sheaf capacity with a formula that roughly follows the
formula for number of objects in cpu partial slabs in set_cpu_partial().
This should achieve roughly similar contention on the barn spin lock as
there's currently for node list_lock without sheaves, to make
benchmarking results comparable. It can be further tuned later.
Don't enable sheaves for bootstrap caches as that wouldn't work. In
order to recognize them by SLAB_NO_OBJ_EXT, make sure the flag exists
even for !CONFIG_SLAB_OBJ_EXT.
This limitation will be lifted for kmalloc caches after the necessary
bootstrapping changes.
Also do not enable sheaves for SLAB_NOLEAKTRACE caches to avoid
recursion with kmemleak tracking (thanks to Breno Leitao).
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
Tested-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Add io_wait_event_killable(), a variant of wait_event_killable() that
uses io_schedule() instead of schedule(). This is to be used in
situation where waiting time is to be accounted as IO wait time.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <1b2870001ecd34fe6c05be2ddfefb3c798b11701.1769179462.git.repk@triplefau.lt>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Merge series from "Sheetal ." <sheetal@nvidia.com>:
This series adds a reg_default_cb callback for REGCACHE_FLAT to provide
defaults for registers not listed in reg_defaults. Defaults are loaded
eagerly during regcache init and the callback can use writeable_reg to
filter valid addresses and avoid holes.
Tegra ASoC drivers set reg_default_cb and add writeable_reg filtering for
AHUB RX holes to prevent invalid addresses from being marked valid.
|
|
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239f3 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
cpufreq calls get_cpu_idle_time_us() just to know if idle cputime
accounting has a nanoseconds granularity.
Use the appropriate indicator instead to make that deduction.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/aXozx0PXutnm8ECX@localhost.localdomain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Document that the function races with the check of DRIVER_OK.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-6-eperezma@redhat.com>
|
|
Return the internal struct that represents the vq group as virtqueue map
token, instead of the device. This allows the map functions to access
the information per group.
At this moment all the virtqueues share the same vq group, that only
can point to ASID 0. This change prepares the infrastructure for actual
per-group address space handling
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-5-eperezma@redhat.com>
|
|
Remove __assume_ctx_lock() from lock initializers.
Implicitly asserting an active context during initialization caused
false-positive double-lock errors when acquiring a lock immediately after its
initialization. Moving forward, guarded member initialization must either:
1. Use guard(type_init)(&lock) or scoped_guard(type_init, ...).
2. Use context_unsafe() for simple initialization.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/57062131-e79e-42c2-aa0b-8f931cb8cac2@acm.org/
Link: https://patch.msgid.link/20260119094029.1344361-7-elver@google.com
|
|
Add scoped init guard definitions for common synchronization primitives
supported by context analysis.
The scoped init guards treat the context as active within initialization
scope of the underlying context lock, given initialization implies
exclusive access to the underlying object. This allows initialization of
guarded members without disabling context analysis, while documenting
initialization from subsequent usage.
The documentation is updated with the new recommendation. Where scoped
init guards are not provided or cannot be implemented (ww_mutex omitted
for lack of multi-arg guard initializers), the alternative is to just
disable context analysis where guarded members are initialized.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20251212095943.GM3911114@noisy.programming.kicks-ass.net/
Link: https://patch.msgid.link/20260119094029.1344361-3-elver@google.com
|
|
Initialization macros can expand to structure initializers containing
commas, which when used as a "lock" function resulted in errors such as:
>> include/linux/spinlock.h:582:56: error: too many arguments provided to function-like macro invocation
582 | DEFINE_LOCK_GUARD_1(raw_spinlock_init, raw_spinlock_t, raw_spin_lock_init(_T->lock), /* */)
| ^
include/linux/spinlock.h:113:17: note: expanded from macro 'raw_spin_lock_init'
113 | do { *(lock) = __RAW_SPIN_LOCK_UNLOCKED(lock); } while (0)
| ^
include/linux/spinlock_types_raw.h:70:19: note: expanded from macro '__RAW_SPIN_LOCK_UNLOCKED'
70 | (raw_spinlock_t) __RAW_SPIN_LOCK_INITIALIZER(lockname)
| ^
include/linux/spinlock_types_raw.h:67:34: note: expanded from macro '__RAW_SPIN_LOCK_INITIALIZER'
67 | RAW_SPIN_DEP_MAP_INIT(lockname) }
| ^
include/linux/cleanup.h:496:9: note: macro '__DEFINE_LOCK_GUARD_1' defined here
496 | #define __DEFINE_LOCK_GUARD_1(_name, _type, _lock) \
| ^
include/linux/spinlock.h:582:1: note: parentheses are required around macro argument containing braced initializer list
582 | DEFINE_LOCK_GUARD_1(raw_spinlock_init, raw_spinlock_t, raw_spin_lock_init(_T->lock), /* */)
| ^
| (
include/linux/cleanup.h:558:60: note: expanded from macro 'DEFINE_LOCK_GUARD_1'
558 | __DEFINE_UNLOCK_GUARD(_name, _type, _unlock, __VA_ARGS__) \
| ^
Make __DEFINE_LOCK_GUARD_0 and __DEFINE_LOCK_GUARD_1 variadic so that
__VA_ARGS__ captures everything.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119094029.1344361-2-elver@google.com
|
|
We are going to remove "ftrace_ops->private == bpf_trampoline" setup
in following changes.
Adding ip argument to ftrace_ops_func_t callback function, so we can
use it to look up the trampoline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-9-jolsa@kernel.org
|
|
Following changes need to lookup trampoline based on its ip address,
adding hash table for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-8-jolsa@kernel.org
|
|
Adding update_ftrace_direct_mod function that modifies all entries
(ip -> direct) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current modify_ftrace_direct is:
- hash argument that allows to modify multiple ip -> direct
entries at once
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-7-jolsa@kernel.org
|
|
Adding update_ftrace_direct_del function that removes all entries
(ip -> addr) provided in hash argument to direct ftrace ops and
updates its attachments.
The difference to current unregister_ftrace_direct is
- hash argument that allows to unregister multiple ip -> direct
entries at once
- we can call update_ftrace_direct_del multiple times on the
same ftrace_ops object, becase we do not need to unregister
all entries at once, we can do it gradualy with the help of
ftrace_update_ops function
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-6-jolsa@kernel.org
|
|
Adding update_ftrace_direct_add function that adds all entries
(ip -> addr) provided in hash argument to direct ftrace ops
and updates its attachments.
The difference to current register_ftrace_direct is
- hash argument that allows to register multiple ip -> direct
entries at once
- we can call update_ftrace_direct_add multiple times on the
same ftrace_ops object, becase after first registration with
register_ftrace_function_nolock, it uses ftrace_update_ops to
update the ftrace_ops object
This change will allow us to have simple ftrace_ops for all bpf
direct interface users in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-5-jolsa@kernel.org
|
|
We are going to use these functions in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-4-jolsa@kernel.org
|
|
At the moment the we allow the jmp attach only for ftrace_ops that
has FTRACE_OPS_FL_JMP set. This conflicts with following changes
where we use single ftrace_ops object for all direct call sites,
so all could be be attached via just call or jmp.
We already limit the jmp attach support with config option and bit
(LSB) set on the trampoline address. It turns out that's actually
enough to limit the jmp attach for architecture and only for chosen
addresses (with LSB bit set).
Each user of register_ftrace_direct or modify_ftrace_direct can set
the trampoline bit (LSB) to indicate it has to be attached by jmp.
The bpf trampoline generation code uses trampoline flags to generate
jmp-attach specific code and ftrace inner code uses the trampoline
bit (LSB) to handle return from jmp attachment, so there's no harm
to remove the FTRACE_OPS_FL_JMP bit.
The fexit/fmodret performance stays the same (did not drop),
current code:
fentry : 77.904 ± 0.546M/s
fexit : 62.430 ± 0.554M/s
fmodret : 66.503 ± 0.902M/s
with this change:
fentry : 80.472 ± 0.061M/s
fexit : 63.995 ± 0.127M/s
fmodret : 67.362 ± 0.175M/s
Fixes: 25e4e3565d45 ("ftrace: Introduce FTRACE_OPS_FL_JMP")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20251230145010.103439-2-jolsa@kernel.org
|
|
To dynamically adjust the thread count, nfsd requires some information
about how busy things are.
Change svc_recv() to take a timeout value, and then allow the wait for
work to time out if it's set. If a timeout is not defined, then the
schedule will be set to MAX_SCHEDULE_TIMEOUT. If the task waits for the
full timeout, then have it return -ETIMEDOUT to the caller.
If it wakes up, finds that there is more work and that no threads are
available, then attempt to set SP_TASK_STARTING. If wasn't already set,
have the task return -EBUSY to cue to the caller that the service could
use more threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Break out the part of svc_start_kthreads() that creates a thread into
svc_new_thread(), as a new exported helper function.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a new pool->sp_nrthrmin field to track the minimum number of threads
in a pool. Add min_threads parameters to both svc_set_num_threads() and
svc_set_pool_threads(). If min_threads is non-zero and less than the
max, svc_set_num_threads() will ensure that the number of running
threads is between the min and the max.
If the min is 0 or greater than the max, then it is ignored, and the
maximum number of threads will be started, and never spun down.
For now, the min_threads is always 0, but a later patch will pass the
proper value through from nfsd.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The kernel currently tracks the number of threads running in a pool in
the "sp_nrthreads" field. In the future, where threads are dynamically
spun up and down, it'll be necessary to keep track of the maximum number
of requested threads separately from the actual number running.
Add a pool->sp_nrthrmax parameter to track this. When userland changes
the number of threads in a pool, update that value accordingly.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_set_num_threads() will set the number of running threads for a given
pool. If the pool argument is set to NULL however, it will distribute
the threads among all of the pools evenly.
These divergent codepaths complicate the move to dynamic threading.
Simplify the API by splitting these two cases into different helpers:
Add a new svc_set_pool_threads() function that sets the number of
threads in a single, given pool. Modify svc_set_num_threads() to
distribute the threads evenly between all of the pools and then call
svc_set_pool_threads() for each.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Some endpoint platforms have only a small number of usable BARs. At the
same time, EPF drivers (e.g. vNTB) may need multiple independent inbound
regions (control/scratchpad, one or more memory windows, and optionally
MSI or other feature-related regions). Subrange mapping allows these to
share a single BAR without consuming additional BARs that may not be
available, or forcing a fragile layout by aggressively packing into a
single contiguous memory range.
Extend the PCI endpoint core to support mapping subranges within a BAR.
Add an optional 'submap' field in struct pci_epf_bar so an endpoint
function driver can request inbound mappings that fully cover the BAR.
Introduce a new EPC feature bit, subrange_mapping, and reject submap
requests from pci_epc_set_bar() unless the controller advertises both
subrange_mapping and dynamic_inbound_mapping features.
The submap array describes the complete BAR layout (no overlaps and no
gaps are allowed to avoid exposing untranslated address ranges). This
provides the generic infrastructure needed to map multiple logical
regions into a single BAR at different offsets, without assuming a
controller-specific inbound address translation mechanism.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-3-den@valinux.co.jp
|
|
Introduce a new EPC feature bit (dynamic_inbound_mapping) that indicates
whether an Endpoint Controller can update the inbound address
translation for a BAR without requiring the EPF driver to clear/reset
the BAR first.
Endpoint Function drivers (e.g. vNTB) can use this information to decide
whether it really is safe to call pci_epc_set_bar() multiple times to
update inbound mappings for the BAR.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-2-den@valinux.co.jp
|
|
Add a new flag that request bounce buffering for direct I/O. This is
needed to provide the stable pages requirement requested by devices
that need to calculate checksums or parity over the data and allows
file systems to properly work with things like T10 protection
information. The implementation just calls out to the new bio bounce
buffering helpers to allocate a bounce buffer, which is used for
I/O and to copy to/from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add helpers to implement bounce buffering of data into a bio to implement
direct I/O for cases where direct user access is not possible because
stable in-flight data is required. These are intended to be used as
easily as bio_iov_iter_get_pages for the zero-copy path.
The write side is trivial and just copies data into the bounce buffer.
The read side is a lot more complex because it needs to perform the copy
from the completion context, and without preserving the iov_iter through
the call chain. It steals a trick from the integrity data user interface
and uses the first vector in the bio for the bounce buffer data that is
fed to the block I/O stack, and uses the others to record the user
buffer fragments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Massage __bio_iov_iter_get_pages so that it doesn't need the bio, and
move it to lib/iov_iter.c so that it can be used by block code for
other things than filling a bio and by other subsystems like netfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the only constant for the maximum bio size is BIO_MAX_SECTORS,
which is in units of 512-byte sectors, but a lot of user need a byte
limit.
Add a BIO_MAX_SIZE constant, redefine BIO_MAX_SECTORS in terms of it, and
switch all bio-related uses of UINT_MAX for the maximum size to use the
symbolic names instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
The keyboard brightness control of Asus WMI keyboards is handled in
kernel, which leads to the shortcut going from brightness 0, to 1,
to 2, and 3.
However, for HID keyboards it is exposed as a key and handled by the
user's desktop environment. For the toggle button, this means that
brightness control becomes on/off. In addition, in the absence of a
DE, the keyboard brightness does not work.
Therefore, expose an event handler for the keyboard brightness control
which can then be used by hid-asus. Since this handler is called from
an interrupt context, defer the actual work to a workqueue.
In the process, introduce ASUS_EV_MAX_BRIGHTNESS to hold the constant
for maximum brightness since it is shared between hid-asus/asus-wmi.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Tested-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-11-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The quirk for selecting whether keyboard backlight should be controlled
by HID or WMI is not needed anymore, so remove the file containing it.
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-10-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some devices, such as the Z13 have multiple Aura devices connected
to them by USB. In addition, they might have a WMI interface for
RGB. In Windows, Armoury Crate exposes a unified brightness slider
for all of them, with 3 brightness levels.
Therefore, to be synergistic in Linux, and support existing tooling
such as UPower, allow adding listeners to the RGB device of the WMI
interface. If WMI does not exist, lazy initialize the interface.
Since hid-asus and asus-wmi can both interact with the led objects
including from an atomic context, protect the brightness access with a
spinlock and update the values from a workqueue. Use this workqueue to
also process WMI keyboard events, so they are handled asynchronously.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20260122075044.5070-8-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge series from Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>:
This patch series improves handling of SPI controllers that are
shared by spi-mem devices and other SPI peripherals.
The primary goal of this series is to support non-spi-mem devices in
the ASPEED FMC/SPI controller driver. It also addresses an issue in
the spi-mem framework observed when different types of SPI devices
operate concurrently on the same controller, ensuring that spi-mem
operations are properly serialized.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-7.0-merge
xfs: autonomous self healing of filesystems [v7]
This patchset builds new functionality to deliver live information about
filesystem health events to userspace. This is done by creating an
anonymous file that can be read() for events by userspace programs.
Events are captured by hooking various parts of XFS and iomap so that
metadata health failures, file I/O errors, and major changes in
filesystem state (unmounts, shutdowns, etc.) can be observed by
programs.
When an event occurs, the hook functions queue an event object to each
event anonfd for later processing. Programs must have CAP_SYS_ADMIN
to open the anonfd and there's a maximum event lag to prevent resource
overconsumption. The events themselves can be read() from the anonfd
as C structs for the xfs_healer daemon.
In userspace, we create a new daemon program that will read the event
objects and initiate repairs automatically. This daemon is managed
entirely by systemd and will not block unmounting of the filesystem
unless repairs are ongoing. They are auto-started by a starter
service that uses fanotify.
This patchset depends on the new fserror code that Christian Brauner
has tentatively accepted for Linux 7.0:
https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs.git/log/?h=vfs-7.0.fserror
v7: more cleanups of the media verification ioctl, improve comments, and
reuse the bio
v6: fix pi-breaking bugs, make verify failures trigger health reports
and filter bio status flags better
v5: add verify-media ioctl, collapse small helper funcs with only
one caller
v4: drop multiple client support so we can make direct calls into
healthmon instead of chasing pointers and doing indirect calls
v3: drag out of rfc status
With a bit of luck, this should all go splendidly.
Conflicts:
This merge required an update on files:
- fs/xfs/xfs_healthmon.c
- fs/xfs/xfs_verify_media.c
Such change was required because a parallel developement changed
XFS header file xfs.h naming to xfs_platform.h, so the merge
required to update those includes in both files above
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Eliminate all kernel-doc warnings in seqlock.h:
- correct the macro to have "()" immediately following the macro name
- don't include the macro parameters in the short description (first line)
- make the parameter names in the comments match the actual macro
parameter names.
- use "::" for the Example
WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment.
* scoped_seqlock_read (lock, ss_state) - execute the read side critical
Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING:
Definition list ends without a blank line; unexpected unindent. [docutils]
Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read'
Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read'
Fixes: cc39f3872c08 ("seqlock: Introduce scoped_seqlock_read()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Signed-off-by: Guillaume Gonnet <ggonnet.linux@gmail.com>
Link: https://lore.kernel.org/r/20260127160200.10395-1-ggonnet.linux@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As the stmmac_priv struct is passed to the fix_soc_reset() method which
has the ioaddr, there is no need to pass ioaddr separately. Pass just
the stmmac_priv struct. Fix up the glues that use it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vkLmM-00000005vE1-0nop@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
|
|
PCI bridge window setup code includes special code to handle CardBus
bridges. CardBus has long since fallen out of favor and modern systems have
no use for it.
Move CardBus setup code to its own file and use existing CONFIG_CARDBUS to
decide whether it should be built or not.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-18-ilpo.jarvinen@linux.intel.com
|
|
The caller may hold a const struct resource which will trigger an
unnecessary warning when calling resource_assigned() as it will not
modify res in any way.
Mark resource_assigned()'s struct resource *res parameter const to
avoid the compiler warning.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251219174036.16738-15-ilpo.jarvinen@linux.intel.com
|
