| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
|
|
synthetized => synthesized
definied => defined
sucess => success
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Drop CPUFREQ_ETERNAL that has no users any more along with all
references to it in the documentation.
No functional impact.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
|
|
Commit a755d0e2d41b ("cpufreq: Honour transition_latency over
transition_delay_us") caused platforms where cpuinfo.transition_latency
is CPUFREQ_ETERNAL to get a very large transition latency whereas
previously it had been capped at 10 ms (and later at 2 ms).
This led to a user-observable regression between 6.6 and 6.12 as
described by Shawn:
"The dbs sampling_rate was 10000 us on 6.6 and suddently becomes
6442450 us (4294967295 / 1000 * 1.5) on 6.12 for these platforms
because the default transition delay was dropped [...].
It slows down dbs governor's reacting to CPU loading change
dramatically. Also, as transition_delay_us is used by schedutil
governor as rate_limit_us, it shows a negative impact on device
idle power consumption, because the device gets slightly less time
in the lowest OPP."
Evidently, the expectation of the drivers using CPUFREQ_ETERNAL as
cpuinfo.transition_latency was that it would be capped by the core,
but they may as well return a default transition latency value instead
of CPUFREQ_ETERNAL and the core need not do anything with it.
Accordingly, introduce CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS and make
all of the drivers in question use it instead of CPUFREQ_ETERNAL. Also
update the related Rust binding.
Fixes: a755d0e2d41b ("cpufreq: Honour transition_latency over transition_delay_us")
Closes: https://lore.kernel.org/linux-pm/20250922125929.453444-1-shawnguo2@yeah.net/
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 6.6+ <stable@vger.kernel.org> # 6.6+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2264949.irdbgypaU6@rafael.j.wysocki
[ rjw: Fix typo in new symbol name, drop redundant type cast from Rust binding ]
Tested-by: Shawn Guo <shawnguo@kernel.org> # with cpufreq-dt driver
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Lacking the support of device specific mapping supported in virtio,
VDUSE must trick the DMA API in order to make virtio-vdpa transport
work. This is done by advertising vDPA device as dma device with a
VDUSE specific dma_ops even if it doesn't do DMA at all.
This will be fixed by this patch. Thanks to the new mapping operations
support by virtio and vDPA. VDUSE can simply switch to advertise its
specific mappings operations to virtio via virtio-vdpa then DMA API is
not needed for VDUSE any more and iova domain could be used as the
mapping token instead.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250924070045.10361-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Virtio core allows the transport to provide device or transport
specific mapping functions. This patch adds this support to vDPA. We
can simply do this by allowing the vDPA parent to register a
virtio_map_ops.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250924070045.10361-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Virtio core switches from DMA device to virtio_map, let's do that
as well for vDPA.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250821064641.5025-8-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
This patch introduces map operations for virtio device. Virtio used to
use DMA API which is not necessarily the case since some devices
doesn't do DMA. Instead of using tricks and abusing DMA API, let's
simply abstract the current mapping logic into a virtio specific
mapping operations. For the device or transport that doesn't do DMA,
they can implement their own mapping logic without the need to trick
DMA core. In this case the mapping metadata is opaque to the virtio
core that will be passed back to the transport or device specific map
operations. For other devices, DMA API will still be used, so map
token will still be the dma device to minimize the changeset and
performance impact.
The mapping operations are abstracted as a independent structure
instead of reusing virtio_config_ops. This allows the transport can
simply reuse the structure for lower layers like vDPA.
A set of new mapping helpers were introduced for the device that want
to do mapping by themselves.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250821064641.5025-7-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Following patch will introduce the mapping operations for virtio
device. In order to achieve this, besides the dma device, virtio core
needs to support a transport or device specific mapping metadata as well.
So this patch introduces a union container of a dma device. The idea
is the allow the transport layer to pass device specific mapping
metadata which will be used as a parameter for the virtio mapping
operations. For the transport or device that is using DMA, dma device
is still being used.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250821064641.5025-5-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Following patch will introduce virtio mapping function to avoid
abusing DMA API for device that doesn't do DMA. To ease the
introduction, this patch rename "dma" to "map" for the current dma
mapping helpers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250821064641.5025-4-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
This patch constifies the virtqueue pointer for DMA helpers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250821064641.5025-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
Add core support for ROHM BD718(15/28/78) PMIC's charger blocks.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20250821-bd71828-charger-v3-1-cc74ac4e0fb9@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The only machine that still uses the old gpio number based interface
is the wlf_cragg_6410 board file. In order to remove the dependency
on the interfaces, add #ifdef blocks here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-13-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Relying on other components to include those basic types is unreliable
and may cause compile errors like:
../include/linux/mfd/qnap-mcu.h:13:9: error: unknown type name ‘u32’
13 | u32 baud_rate;
| ^~~
../include/linux/mfd/qnap-mcu.h:17:9: error: unknown type name ‘bool’
17 | bool usb_led;
| ^~~~
So make sure, the types used in the header are available.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-mfd-gpio-hwmon-i2c-can-rtc-watchdog-6.18', 'ib-mfd-gpio-input-pinctrl-pwm-6.18', 'ib-mfd-input-6.18', 'ib-mfd-input-rtc-6.18' and 'ib-mfd-power-regulator-6.18' into ibs-for-mfd-merged
|
|
This reverts commit 7bd80ed89d72285515db673803b021469ba71ee8.
I should not have merged it to begin with due to pending review and
changes to be addressed.
Link: https://patch.msgid.link/c6f3af12df9b7998920a02027fc8893ce82afc4c.1759239721.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Use the startup/shutdown callbacks for the PCI/MSI per device
interrupt domains.
This allows us to initialize the RISCV PLIC interrupt hierarchy
correctly and provides a mechanism to decouple the masking and
unmasking during run-time from the expensive PCI mask and unmask when
the underlying MSI provider implementation allows the interrupt to be
masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that
the affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at
the PCI device during operation when the provider can mask the
interrupt at the underlying interrupt chip. This reduces the overhead
in scenarios where disable_irq()/enable_irq() is utilized frequently
by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and
has the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
* tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller
PCI/MSI: Remove the conditional parent [un]mask logic
irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag
irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers
dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization
irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc()
irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path
irqchip/gic-v5: Delete a stray tab
irqchip/sg2042-msi: Set irq type according to DT configuration
riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING
riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING
irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment
irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM
irqchip: Use int type to store negative error codes
irqchip/gic-v5: Remove the redundant ITS cache invalidation
PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent()
irqchip/loongson-eiointc: Add multiple interrupt pin routing support
irqchip/loongson-eiointc: Route interrupt parsed from bios table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A set of updates for the interrupt core subsystem:
- Introduce irq_chip_[startup|shutdown]_parent() to prepare for
addressing a few short comings in the PCI/MSI interrupt subsystem.
It allows to utilize the interrupt chip startup/shutdown callbacks
for initializing the interrupt chip hierarchy properly on certain
RISCV implementations and provides a mechanism to reduce the
overhead of masking and unmasking PCI/MSI interrupts during
operation when the underlying MSI provider can mask the interrupt.
The actual usage comes with the interrupt driver pull request.
- Add generic error handling for devm_request_*_irq()
This allows to remove the zoo of random error printk's all over the
usage sites.
- Add a mechanism to warn about long-running interrupt handlers
Long running interrupt handlers can introduce latencies and
tracking them down is a tedious task. The tracking has to be
enabled with a threshold on the kernel command line and utilizes a
static branch to remove the overhead when disabled.
- Update and extend the selftests which validate the CPU hotplug
interrupt migration logic
- Allow dropping the per CPU softirq lock on PREEMPT_RT kernels,
which causes contention and latencies all over the place.
The serialization requirements have been pushed down into the
actual affected usage sites already.
- The usual small cleanups and improvements"
* tag 'irq-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT
softirq: Provide a handshake for canceling tasklets via polling
genirq/test: Ensure CPU 1 is online for hotplug test
genirq/test: Drop CONFIG_GENERIC_IRQ_MIGRATION assumptions
genirq/test: Depend on SPARSE_IRQ
genirq/test: Fail early if interrupt request fails
genirq/test: Factor out fake-virq setup
genirq/test: Select IRQ_DOMAIN
genirq/test: Fix depth tests on architectures with NOREQUEST by default.
genirq: Add support for warning on long-running interrupt handlers
genirq/devres: Add error handling in devm_request_*_irq()
genirq: Add irq_chip_(startup/shutdown)_parent()
genirq: Remove GENERIC_IRQ_LEGACY
|
|
Rename the "kvm" entry code files and Kconfigs to use generic "virt"
nomenclature so that the code can be reused by other hypervisors (or
rather, their root/dom0 partition drivers), without incorrectly suggesting
the code somehow relies on and/or involves KVM.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Move KVM's morphing of pending signals into userspace exits into KVM
proper, and drop the @vcpu param from xfer_to_guest_mode_handle_work().
How KVM responds to -EINTR is a detail that really belongs in KVM itself,
and invoking kvm_handle_signal_exit() from kernel code creates an inverted
module dependency. E.g. attempting to move kvm_handle_signal_exit() into
kvm_main.c would generate an linker error when building kvm.ko as a module.
Dropping KVM details will also converting the KVM "entry" code into a more
generic virtualization framework so that it can be used when running as a
Hyper-V root partition.
Lastly, eliminating usage of "struct kvm_vcpu" outside of KVM is also nice
to have for KVM x86 developers, as keeping the details of kvm_vcpu purely
within KVM allows changing the layout of the structure without having to
boot into a new kernel, e.g. allows rebuilding and reloading kvm.ko with a
modified kvm_vcpu structure as part of debug/development.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Add support on AMD for assigning QoS bandwidth counters to resources
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them.
Previously, due to hw limitations, bandwidth counts from untracked
resources would get lost when those resources are not tracked.
Refactor the code and user interfaces to be able to also support
other, similar features on ARM, for example"
* tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled
MAINTAINERS: resctrl: Add myself as reviewer
x86/resctrl: Configure mbm_event mode if supported
fs/resctrl: Introduce the interface to switch between monitor modes
fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled
fs/resctrl: Introduce the interface to modify assignments in a group
fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group
fs/resctrl: Auto assign counters on mkdir and clean up on group removal
fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir
fs/resctrl: Provide interface to update the event configurations
fs/resctrl: Add event configuration directory under info/L3_MON/
fs/resctrl: Support counter read/reset with mbm_event assignment mode
x86/resctrl: Implement resctrl_arch_reset_cntr() and resctrl_arch_cntr_read()
x86/resctrl: Refactor resctrl_arch_rmid_read()
fs/resctrl: Introduce counter ID read, reset calls in mbm_event mode
fs/resctrl: Pass struct rdtgroup instead of individual members
fs/resctrl: Add the functionality to unassign MBM events
fs/resctrl: Add the functionality to assign MBM events
x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC
fs/resctrl: Introduce event configuration field in struct mon_evt
...
|
|
Add nfsd_file_dio_alignment and use it to avoid issuing misaligned IO
using O_DIRECT. Any misaligned DIO falls back to using buffered IO.
Because misaligned DIO is now handled safely, remove the nfs modparam
'localio_O_DIRECT_semantics' that was added to require users opt-in to
the requirement that all O_DIRECT be properly DIO-aligned.
Also, introduce nfs_iov_iter_aligned_bvec() which is a variant of
iov_iter_aligned_bvec() that also verifies the offset associated with
an iov_iter is DIO-aligned. NOTE: in a parallel effort,
iov_iter_aligned_bvec() is being removed along with
iov_iter_is_aligned().
Lastly, add pr_info_ratelimited if underlying filesystem returns
-EINVAL because it was made to try O_DIRECT for IO that is not
DIO-aligned (shouldn't happen, so its best to be louder if it does).
Fixes: 3feec68563d ("nfs/localio: add direct IO enablement with sync and async IO support")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for new AMD family 0x1a models to amd64_edac
- Add an EDAC driver for the AMD VersalNET memory controller which
reports hw errors from different IP blocks in the fabric using an
IPC-type transport
- Drop the silly static number of memory controllers in the Intel EDAC
drivers (skx, i10nm) in favor of a flexible array so that former
doesn't need to be increased with every new generation which adds
more memory controllers; along with a proper refactoring
- Add support for two Alder Lake-S SOCs to ie31200_edac
- Add an EDAC driver for ADM Cortex A72 cores, and specifically for
reporting L1 and L2 cache errors
- Last but not least, the usual fixes, cleanups and improvements all
over the subsystem
* tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (23 commits)
EDAC/versalnet: Return the correct error in mc_probe()
EDAC/mc_sysfs: Increase legacy channel support to 16
EDAC/amd64: Add support for AMD family 1Ah-based newer models
EDAC: Add a driver for the AMD Versal NET DDR controller
dt-bindings: memory-controllers: Add support for Versal NET EDAC
RAS: Export log_non_standard_event() to drivers
cdx: Export Symbols for MCDI RPC and Initialization
cdx: Split mcdi.h and reorganize headers
EDAC/skx_common: Use topology_physical_package_id() instead of open coding
EDAC: Fix wrong executable file modes for C source files
EDAC/altera: Use dev_fwnode()
EDAC/skx_common: Remove unused *NUM*_IMC macros
EDAC/i10nm: Reallocate skx_dev list if preconfigured cnt != runtime cnt
EDAC/skx_common: Remove redundant upper bound check for res->imc
EDAC/skx_common: Make skx_dev->imc[] a flexible array
EDAC/skx_common: Swap memory controller index mapping
EDAC/skx_common: Move mc_mapping to be a field inside struct skx_imc
EDAC/{skx_common,skx}: Use configuration data, not global macros
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
EDAC/ie31200: Add two more Intel Alder Lake-S SoCs for EDAC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
|
|
Rework the vast majority of KVM's exports to expose symbols only to KVM
submodules, i.e. to x86's kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko.
With few exceptions, KVM's exported APIs are intended (and safe) for KVM-
internal usage only.
Keep kvm_get_kvm(), kvm_get_kvm_safe(), and kvm_put_kvm() as normal
exports, as they are needed by VFIO, and are generally safe for external
usage (though ideally even the get/put APIs would be KVM-internal, and
VFIO would pin a VM by grabbing a reference to its associated file).
Implement a framework in kvm_types.h in anticipation of providing a macro
to restrict KVM-specific kernel exports, i.e. to provide symbol exports
for KVM if and only if KVM is built as one or more modules.
Link: https://lore.kernel.org/r/20250919003303.1355064-3-seanjc@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
|
HEAD
KVM SEV-SNP CipherText Hiding support for 6.18
Add support for SEV-SNP's CipherText Hiding, an opt-in feature that prevents
unauthorized CPU accesses from reading the ciphertext of SNP guest private
memory, e.g. to attempt an offline attack. Instead of ciphertext, the CPU
will always read back all FFs when CipherText Hiding is enabled.
Add new module parameter to the KVM module to enable CipherText Hiding and
control the number of ASIDs that can be used for VMs with CipherText Hiding,
which is in effect the number of SNP VMs. When CipherText Hiding is enabled,
the shared SEV-ES/SEV-SNP ASID space is split into separate ranges for SEV-ES
and SEV-SNP guests, i.e. ASIDs that can be used for CipherText Hiding cannot
be used to run SEV-ES guests.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.18
1. Add PTW feature detection on new hardware.
2. Add sign extension with kernel MMIO/IOCSR emulation.
3. Improve in-kernel IPI emulation.
4. Improve in-kernel PCH-PIC emulation.
5. Move kvm_iocsr tracepoint out of generic code.
|
|
KVM/riscv changes for 6.18
- Added SBI FWFT extension for Guest/VM with misaligned
delegation and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V such as
access_tracking_perf_test, dirty_log_perf_test,
memslot_modification_stress_test, memslot_perf_test,
mmu_stress_test, and rseq_test
- Added SBI v3.0 PMU enhancements in KVM and perf driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.18
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
[Pull into kvm/master to fix conflicts. - Paolo]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new
helpers, removing redundant code paths, and improving error handling
for better maintainability.
- A few bug fixes to cpuset including fixes for partition creation
failures when isolcpus is in use, missing error returns, and null
pointer access prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better
scalability, workqueue conversions to use WQ_PERCPU and
system_percpu_wq to prepare for workqueue default switching from
percpu to unbound, and removal of unused code including the
post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function
safety improvements, and 64-bit division fixes.
* tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (39 commits)
cpuset: remove is_prs_invalid helper
cpuset: remove impossible warning in update_parent_effective_cpumask
cpuset: remove redundant special case for null input in node mask update
cpuset: fix missing error return in update_cpumask
cpuset: Use new excpus for nocpu error check when enabling root partition
cpuset: fix failure to enable isolated partition when containing isolcpus
Documentation: cgroup-v2: Sync manual toctree
cpuset: use partition_cpus_change for setting exclusive cpus
cpuset: use parse_cpulist for setting cpus.exclusive
cpuset: introduce partition_cpus_change
cpuset: refactor cpus_allowed_validate_change
cpuset: refactor out validate_partition
cpuset: introduce cpus_excl_conflict and mems_excl_conflict helpers
cpuset: refactor CPU mask buffer parsing logic
cpuset: Refactor exclusive CPU mask computation logic
cpuset: change return type of is_partition_[in]valid to bool
cpuset: remove unused assignment to trialcs->partition_root_state
cpuset: move the root cpuset write check earlier
cgroup/cpuset: Remove redundant rcu_read_lock/unlock() in spin_lock
cgroup: Remove redundant rcu_read_lock/unlock() in spin_lock
...
|
|
Pull workqueue updates from Tejun Heo:
- WQ_PERCPU was added to remaining alloc_workqueue() users and
system_wq usage was replaced with system_percpu_wq and
system_unbound_wq with system_dfl_wq.
These are equivalent conversions with no functional changes,
preparing for switching default to unbound workqueues from percpu.
- A handshake mechanism was added for canceling BH workers to avoid
live lock scenarios under PREEMPT_RT.
- Unnecessary rcu_read_lock/unlock() calls were dropped in
wq_watchdog_timer_fn() and workqueue_congested().
- Documentation was fixed to resolve texinfodocs warnings.
* tag 'wq-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix texinfodocs warning for WQ_* flags reference
workqueue: WQ_PERCPU added to alloc_workqueue users
workqueue: replace use of system_wq with system_percpu_wq
workqueue: replace use of system_unbound_wq with system_dfl_wq
workqueue: Provide a handshake for canceling BH workers
workqueue: Remove rcu_read_lock/unlock() in wq_watchdog_timer_fn()
workqueue: Remove redundant rcu_read_lock/unlock() in workqueue_congested()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Code organization cleanup. Separate internal types and accessors to
ext_internal.h to reduce the size of ext.c and improve
maintainability.
- Prepare for cgroup sub-scheduler support by adding @sch parameter to
various functions and helpers, reorganizing scheduler instance
handling, and dropping obsolete helpers like scx_kf_exit() and
kf_cpu_valid().
- Add new scx_bpf_cpu_curr() and scx_bpf_locked_rq() BPF helpers to
provide safer access patterns with proper RCU protection.
scx_bpf_cpu_rq() is deprecated with warnings due to potential race
conditions.
- Improve debugging with migration-disabled counter in error state
dumps, SCX_EFLAG_INITIALIZED flag, bitfields for warning flags, and
other enhancements to help diagnose issues.
- Use cgroup_lock/unlock() for cgroup synchronization instead of
scx_cgroup_rwsem based synchronization. This is simpler and allows
enable/disable paths to synchronize against cgroup changes
independent of the CPU controller.
- rhashtable_lookup() replacement to avoid redundant RCU locking was
reverted due to RCU usage warnings. Will be redone once rhashtable is
updated to use rcu_dereference_all().
- Other misc updates and fixes including bypass handling improvements,
scx_task_iter_relock() improvements, tools/sched_ext updates, and
compatibility helpers.
* tag 'sched_ext-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (28 commits)
Revert "sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()"
sched_ext: Misc updates around scx_sched instance pointer
sched_ext: Drop scx_kf_exit() and scx_kf_error()
sched_ext: Add the @sch parameter to scx_dsq_insert_preamble/commit()
sched_ext: Drop kf_cpu_valid()
sched_ext: Add the @sch parameter to ext_idle helpers
sched_ext: Add the @sch parameter to __bstr_format()
sched_ext: Separate out scx_kick_cpu() and add @sch to it
tools/sched_ext: scx_qmap: Make debug output quieter by default
sched_ext: Make qmap dump operation non-destructive
sched_ext: Add SCX_EFLAG_INITIALIZED to indicate successful ops.init()
sched_ext: Use bitfields for boolean warning flags
sched_ext: Fix stray scx_root usage in task_can_run_on_remote_rq()
sched_ext: Improve SCX_KF_DISPATCH comment
sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()
sched_ext: Verify RCU protection in scx_bpf_cpu_curr()
sched_ext: Add migration-disabled counter to error state dump
sched_ext: Fix NULL dereference in scx_bpf_cpu_rq() warning
tools/sched_ext: Add compat helper for scx_bpf_cpu_curr()
sched_ext: deprecation warn for scx_bpf_cpu_rq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the management of the LSM BPF security blobs into the framework
In order to enable multiple LSMs we need to allocate and free the
various security blobs in the LSM framework and not the individual
LSMs as they would end up stepping all over each other.
- Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc()
Make better use of our existing helper functions to reduce some code
duplication.
- Update the Rust cred code to use 'sync::aref'
Part of a larger effort to move the Rust code over to the 'sync'
module.
- Make CONFIG_LSM dependent on CONFIG_SECURITY
As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to
enable a boot, it obviously doesn't make much sense to enable this
when CONFIG_SECURITY is disabled.
- Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty
bits
Add the Rust helper files to the associated LSM and CREDENTIALS
entries int the MAINTAINERS file. We're trying to improve the
communication between the two groups and making sure we're all aware
of what is going on via cross-posting to the relevant lists is a good
way to start.
* tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: CONFIG_LSM can depend on CONFIG_SECURITY
MAINTAINERS: add the associated Rust helper to the CREDENTIALS section
MAINTAINERS: add the associated Rust helper to the LSM section
rust,cred: update AlwaysRefCounted import to sync::aref
security: use umax() to improve code
lsm,selinux: Add LSM blob support for BPF objects
lsm: use lsm_blob_alloc() in lsm_bdev_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Proper audit support for multiple LSMs
As the audit subsystem predated the work to enable multiple LSMs,
some additional work was needed to support logging the different LSM
labels for the subjects/tasks and objects on the system. Casey's
patches add new auxillary records for subjects and objects that
convey the additional labels.
- Ensure fanotify audit events are always generated
Generally speaking security relevant subsystems always generate audit
events, unless explicitly ignored. However, up to this point fanotify
events had been ignored by default, but starting with this pull
request fanotify follows convention and generates audit events by
default.
- Replace an instance of strcpy() with strscpy()
- Minor indentation, style, and comment fixes
* tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix skb leak when audit rate limit is exceeded
audit: init ab->skb_list earlier in audit_buffer_alloc()
audit: add record for multiple object contexts
audit: add record for multiple task security contexts
lsm: security_lsmblob_to_secctx module selection
audit: create audit_stamp structure
audit: add a missing tab
audit: record fanotify event regardless of presence of rules
audit: fix typo in auditfilter.c comment
audit: Replace deprecated strcpy() with strscpy()
audit: fix indentation in audit_log_exit()
|
|
- Implement haptic touchpad support (Angela Czubak and Jonathan Denose)
|
|
Instead of sharing sd->defer_list & sd->defer_count with
many cpus, add one pair for each NUMA node.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Get rid of sd->defer_lock and adopt llist operations.
We optimize skb_attempt_defer_free() for the common case,
where the packet is queued. Otherwise sd->defer_count
is increasing, until skb_defer_free_flush() clears it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is preparation work to remove the softnet_data.defer_lock,
as it is contended on hosts with large number of cores.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250928084934.3266948-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After 42e2a9e11a1d ("net: phy: dp83640: improve phydev and driver
removal handling") we can stop exporting also phy_driver_unregister().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/2bab950e-4b70-4030-b997-03f48379586f@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new document, flow_control.rst, to provide a comprehensive
guide on Ethernet Flow Control in Linux. The guide explains how flow
control works, how autonegotiation resolves pause capabilities, and how
to configure it using ethtool and Netlink.
In parallel, document the pause and pause-stat attributes in the
ethtool.yaml netlink spec. This enables the ynl tool to generate
kernel-doc comments for the corresponding enums in the UAPI header,
making the C interface self-documenting.
Finally, replace the legacy flow control section in phy.rst with a
reference to the new document and add pointers in the relevant C source
files.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Refactor SCLP memory hotplug code
- Introduce common boot_panic() decompressor helper macro and use it to
get rid of nearly few identical implementations
- Take into account additional key generation flags and forward it to
the ep11 implementation. With that allow users to modify the key
generation process, e.g. provide valid combinations of XCP_BLOB_*
flags
- Replace kmalloc() + copy_from_user() with memdup_user_nul() in s390
debug facility and HMC driver
- Add DAX support for DCSS memory block devices
- Make the compiler statement attribute "assume" available with a new
__assume macro
- Rework ffs() and fls() family bitops functions, including source code
improvements and generated code optimizations. Use the newly
introduced __assume macro for that
- Enable additional network features in default configurations
- Use __GFP_ACCOUNT flag for user page table allocations to add missing
kmemcg accounting
- Add WQ_PERCPU flag to explicitly request the use of the per-CPU
workqueue for 3590 tape driver
- Switch power reading to the per-CPU and the Hiperdispatch to the
default workqueue
- Add memory allocation profiling hooks to allow better profiling data
and the /proc/allocinfo output similar to other architectures
* tag 's390-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
s390/mm: Add memory allocation profiling hooks
s390: Replace use of system_wq with system_dfl_wq
s390/diag324: Replace use of system_wq with system_percpu_wq
s390/tape: Add WQ_PERCPU to alloc_workqueue users
s390/bitops: Switch to generic ffs() if supported by compiler
s390/bitops: Switch to generic fls(), fls64(), etc.
s390/mm: Use __GFP_ACCOUNT for user page table allocations
s390/configs: Enable additional network features
s390/bitops: Cleanup __flogr()
s390/bitops: Use __assume() for __flogr() inline assembly return value
compiler_types: Add __assume macro
s390/bitops: Limit return value range of __flogr()
s390/dcssblk: Add DAX support
s390/hmcdrv: Replace kmalloc() + copy_from_user() with memdup_user_nul()
s390/debug: Replace kmalloc() + copy_from_user() with memdup_user_nul()
s390/pkey: Forward keygenflags to ep11_unwrapkey
s390/boot: Add common boot_panic() code
s390/bitops: Optimize inlining
s390/bitops: Slightly optimize ffs() and fls64()
s390/sclp: Move memory hotplug code for better modularity
...
|
