| Age | Commit message (Collapse) | Author |
|---|
|
Commit 0f022d32c3ec ("net/sched: Fix mirred deadlock on device recursion")
added code in the fast path, even when act_mirred is not used.
Prepare its revert by implementing loop detection in act_mirred.
Adds an array of device pointers in struct netdev_xmit.
tcf_mirred_is_act_redirect() can detect if the array
already contains the target device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pci_msi_create_irq_domain() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-6.19
Pull in tip/sched/core to receive:
50653216e4ff ("sched: Add support to pick functions to take rf")
4c95380701f5 ("sched/ext: Fold balance_scx() into pick_task_scx()")
which will enable clean integration of DL server support among other things.
This conflicts with the following from sched_ext/for-6.18-fixes:
a8ad873113d3 ("sched_ext: defer queue_balance_callback() until after ops.dispatch")
which adds maybe_queue_balance_callback() to balance_scx() which is removed
by 50653216e4ff. Resolve by moving the invocation to pick_task_scx() in the
equivalent location.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
The IRQCHIP_PLATFORM_DRIVER macros can be used to convert OF irqchip
drivers to platform drivers but currently reuse the OF init callback
prototype that only takes OF nodes as arguments. This forces drivers to
do reverse lookups of their struct devices during probe if they need
them for things like dev_printk() and device managed resources.
Half of the drivers doing reverse lookups also currently fail to release
the additional reference taken during the lookup, while other drivers
have had the reference leak plugged in various ways (e.g. using
non-intuitive cleanup constructs which still confuse static checkers).
Switch to using a probe callback that takes a platform device as its
first argument to simplify drivers and plug the remaining (mostly
benign) reference leaks.
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Fixes: 70afdab904d2 ("irqchip: Add IMX MU MSI controller driver")
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
|
|
Last user of linux/gpio/legacy-of-mm-gpiochip.h is gone.
Remove linux/gpio/legacy-of-mm-gpiochip.h and
CONFIG_OF_GPIO_MM_GPIOCHIP
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some pick functions like the internal pick_next_task_fair() already take
rf but some others dont. We need this for scx's server pick function.
Prepare for this by having pick functions accept it.
[peterz: - added RETRY_TASK handling
- removed pick_next_task_fair indirection]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
Hopefully saner naming.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
|
|
As proposed a long while ago -- and half done by scx -- wrap the
scheduler's 'change' pattern in a guard helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
|
|
The blocker tracking mechanism assumes that lock pointers are at least
4-byte aligned to use their lower bits for type encoding.
However, as reported by Eero Tamminen, some architectures like m68k
only guarantee 2-byte alignment of 32-bit values. This breaks the
assumption and causes two related WARN_ON_ONCE checks to trigger.
To fix this, the runtime checks are adjusted to silently ignore any lock
that is not 4-byte aligned, effectively disabling the feature in such
cases and avoiding the related warnings.
Thanks to Geert Uytterhoeven for bisecting!
Link: https://lkml.kernel.org/r/20250909145243.17119-1-lance.yang@linux.dev
Fixes: e711faaafbe5 ("hung_task: replace blocker_mutex with encoded blocker")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Closes: https://lore.kernel.org/lkml/CAMuHMdW7Ab13DdGs2acMQcix5ObJK0O2dG_Fxzr8_g58Rc1_0g@mail.gmail.com
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The builtin DSQ queue data structures are meant to be used by a wide
range of different sched_ext schedulers with different demands on these
data structures. They might be per-cpu with low-contention, or
high-contention shared queues. Unfortunately, DSQs have a coarse-grained
lock around the whole data structure. Without going all the way to a
lock-free, more scalable implementation, a small step we can take to
reduce lock contention is to allow a lockless, small-fixed-cost peek at
the head of the queue.
This change allows certain custom SCX schedulers to cheaply peek at
queues, e.g. during load balancing, before locking them. But it
represents a few extra memory operations to update the pointer each
time the DSQ is modified, including a memory barrier on ARM so the write
appears correctly ordered.
This commit adds a first_task pointer field which is updated
atomically when the DSQ is modified, and allows any thread to peek at
the head of the queue without holding the lock.
Signed-off-by: Ryan Newton <newton@meta.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This effectively reverts b0ba512e25d7 ("net: bcmgenet: enable driver to
work without a device tree"). There has never been an in-tree user of
struct bcmgenet_platform_data, all devices use OF or ACPI.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/108b4e64-55d4-4b4e-9a11-3c810c319d66@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have many places which open-code what's now is bpf_rcu_lock_held()
macro, so replace all those places with a clean and short macro invocation.
For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org
|
|
bpf_async_cb structures.
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
|
|
Forward critical supply events downstream so consumers can react in
time. An under-voltage event on an upstream rail may otherwise never
reach end devices (e.g. eMMC).
Register a notifier on a regulator's supply when the supply is resolved,
and forward only REGULATOR_EVENT_UNDER_VOLTAGE to the consumer's notifier
chain. Event handling is deferred to process context via a workqueue; the
consumer rdev is lifetime-pinned and the rdev lock is held while calling
the notifier chain. The notifier is unregistered on regulator teardown.
No DT/UAPI changes. Behavior applies to all regulators with a supply.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251001105650.2391477-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use macro module_driver to avoid boilerplate code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e5c37417-4984-4b57-8154-264deef61e0d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add some helper macros which can be used by livepatch source .patch
files to register callbacks, convert static calls to regular calls where
needed, and patch syscalls.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add a new klp diff subcommand which performs a binary diff between two
object files and extracts changed functions into a new object which can
then be linked into a livepatch module.
This builds on concepts from the longstanding out-of-tree kpatch [1]
project which began in 2012 and has been used for many years to generate
livepatch modules for production kernels. However, this is a complete
rewrite which incorporates hard-earned lessons from 12+ years of
maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for symbol/section/reloc
inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines script
(coming in a later patch) which injects #line directives into the
source .patch to preserve the original line numbers at compile time.
Note the end result of this subcommand is not yet functionally complete.
Livepatch needs some ELF magic which linkers don't like:
- Two relocation sections (.rela*, .klp.rela*) for the same text
section.
- Use of SHN_LIVEPATCH to mark livepatch symbols.
Unfortunately linkers tend to mangle such things. To work around that,
klp diff generates a linker-compliant intermediate binary which encodes
the relevant KLP section/reloc/symbol metadata.
After module linking, a klp post-link step (coming soon) will clean up
the mess and convert the linked .ko into a fully compliant livepatch
module.
Note this subcommand requires the diffed binaries to have been compiled
with -ffunction-sections and -fdata-sections, and processed with
'objtool --checksum'. Those constraints will be handled by a klp-build
script introduced in a later patch.
Without '-ffunction-sections -fdata-sections', reliable object diffing
would be infeasible due to toolchain limitations:
- For intra-file+intra-section references, the compiler might
occasionally generated hard-coded instruction offsets instead of
relocations.
- Section-symbol-based references can be ambiguous:
- Overlapping or zero-length symbols create ambiguity as to which
symbol is being referenced.
- A reference to the end of a symbol (e.g., checking array bounds)
can be misinterpreted as a reference to the next symbol, or vice
versa.
A potential future alternative to '-ffunction-sections -fdata-sections'
would be to introduce a toolchain option that forces symbol-based
(non-section) relocations.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The C implementation of STACK_FRAME_NON_STANDARD emits 8-byte entries,
whereas the asm version's entries are only 4 bytes.
Make them consistent by converting the asm version to 8-byte entries.
This is much easier than converting the C version to 4-bytes, which
would require awkwardly putting inline asm in a dummy function in order
to pass the 'func' pointer to the asm.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add annotations for
special section entries. This will enable objtool to determine the size
and location of the entries and to extract them when needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add an
ANNOTATE_DATA_SPECIAL macro which annotates special section entries so
that objtool can determine their size and location and extract them
when needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for using the objtool annotation macros in higher-level
objtool.h macros like UNWIND_HINT, move them to their own file.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, remove the arbitrary
'kmod_' prefix from __KBUILD_MODNAME and instead add it explicitly in
the __initcall_id() macro.
This change supports the standardization of "unique" symbol naming by
ensuring the non-unique portion of the name comes before the unique
part. That will enable objtool to properly correlate symbols across
builds.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, replace the custom
unique symbol name generation in ELFNOTE() with __UNIQUE_ID().
This standardizes the naming format for all "unique" symbols, which will
allow objtool to properly correlate them. Note this also removes the
"one ELF note per line" limitation.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Avoid underscore overload by changing:
__UNIQUE_ID___addressable_loops_per_jiffy_868
to the following:
__UNIQUE_ID_addressable_loops_per_jiffy_868
This matches the format used by other __UNIQUE_ID()-generated symbols
and improves readability for those who stare at ELF symbol table dumps.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add an underscore
between the name and the counter. This will make it possible for
objtool to distinguish between the non-unique and unique parts of the
symbol name so it can properly correlate the symbols.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Implement the missing cgroup_set_idle() callback that was marked as a
TODO. This allows BPF schedulers to be notified when a cgroup's idle
state changes, enabling them to adjust their scheduling behavior
accordingly.
The implementation follows the same pattern as other cgroup callbacks
like cgroup_set_weight() and cgroup_set_bandwidth(). It checks if the
BPF scheduler has implemented the callback and invokes it with the
appropriate parameters.
Fixes a spelling error in the cgroup_set_bandwidth() documentation.
tj: s/scx_cgroup_rwsem/scx_cgroup_ops_rwsem/ to fix build breakage.
Signed-off-by: zhidao su <soolaugust@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory notifiers were introduced
to prepare the transition of memory to and from a physically accessible
state. This enhancement was crucial for implementing the "memmap on memory"
feature for s390.
With introduction of dynamic (de)configuration of hotpluggable memory,
memory can be brought to accessible state before add_memory(). Memory
can be brought to inaccessible state before remove_memory(). Hence,
there is no need of MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE memory
notifiers anymore.
This basically reverts commit
c5f1e2d18909 ("mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers")
Additionally, apply minor adjustments to the function parameters of
move_pfn_range_to_zone() and mhp_supports_memmap_on_memory() to ensure
compatibility with the latest branch.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
hid_warn_ratelimited() is needed. Add the others as part of the block.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Broadcom bcm54811 is hardware-strapped to select among RGMII and
GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable
in Miscellaneous Control Register must be also set to select desired
RGMII or MII(-lite)/GMII mode.
Fixes: 3117a11fff5af9e7 ("net: phy: bcm54811: PHY initialization")
Signed-off-by: Kamil Horák - 2N <kamilh@axis.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251009130656.1308237-2-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The setting of delay_retrans is applied to synchronous RPC operations
because the retransmit count is stored in same struct nfs4_exception
that is passed each time an error is checked. However, for asynchronous
operations (READ, WRITE, LOCKU, CLOSE, DELEGRETURN), a new struct
nfs4_exception is made on the stack each time the task callback is
invoked. This means that the retransmit count is always zero and thus
delay_retrans never takes effect.
Apply delay_retrans to these operations by tracking and updating their
retransmit count.
Change-Id: Ieb33e046c2b277cb979caa3faca7f52faf0568c9
Signed-off-by: Joshua Watt <jpewhacker@gmail.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
A commit 3a93d082bacf ("ALSA: firewire-motu: add support for MOTU Audio
Express") describes a quirk of MOTU Audio Express. The device returns
acknowledge packet with 0x10 as the pending state of any types of
asynchronous request transaction. It is completely out of specification.
This commit implements handling for that device-specific quirk. The quirk
is detected after reading the root directory of configuration ROM. When
processing the acknowledge code in 1394 OHCI AT context event handler,
firewire-ohci module seeks the device instance of destination node by
traversing device hierarchy. If the device has the quirk, the acknowledge
code is replaced with the standard code.
The 1394 OHCI AT context events occur for outgoing asynchronous request
packets. The device traversal is safe since no new request initiators
exist after the fw_card_instance has been invalidated.
Link: https://lore.kernel.org/r/20251013140311.97159-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Every time the bus manager runs, the cached configuration ROM content of
the IRM device is investigated to detect device-specific quirks. This
detection can be performed in advance when reading the configuration ROM.
This commit adds device quirk flags to the fw_device structure, and
initializes them after reading the bus information block of the
configuration ROM. The quirk flags are immutable once the configuration
ROM has been read. Although they are likely accessed concurrently only by
the bus manager, this commit ensures safe access by preventing torn writes
and reads using the WRITE_ONCE()/READ_ONCE() macros.
Link: https://lore.kernel.org/r/20251013140311.97159-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Move struct rpmb_frame and RPMB operation constants from MMC block
driver to include/linux/rpmb.h for reuse across different RPMB
implementations (UFS, NVMe, etc.).
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add an offset parameter that can be passed in the periodic trigger.
This is useful for example when ADC drivers implement a separate periodic
signal to trigger conversion and need offload to read the result with
some delay. While at it, add some documentation to offload periodic trigger
parameters.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/cd315e95c0bd8523f00e91c400abcd6a418e5924.1759760519.git.marcelo.schmitt@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint
memory access descriptor to allow any sender could to specify an its any
custom value for each receiver. Also this value must be specified by the
receiver when retrieving the memory region. The sender must ensure it
informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism
such as a partition message.
So the FF-A driver can use the message interfaces to communicate the value
and set the same in the ffa_mem_region_attributes structures when using
the memory interfaces.
The driver ensure that the size of the endpoint memory access descriptors
is set correctly based on the FF-A version.
Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver")
Reported-by: Lixiang Mao <liximao@qti.qualcomm.com>
Tested-by: Lixiang Mao <liximao@qti.qualcomm.com>
Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Implement the .get_dma_dev() callback for DMA buffers by returning the
device that owns the DMA channel. This allows the core DMABUF
infrastructure to properly map DMA buffers using the correct device,
avoiding the need for bounce buffers on systems where memory is mapped
above the 32-bit range.
The function returns the DMA queue's device, which is the actual device
responsible for DMA operations in buffer-dma implementations.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a new buffer accessor .get_dma_dev() in order to get the
struct device responsible for actually providing the dma channel. We
cannot assume that we can use the parent of the IIO device for mapping
the DMA buffer. This becomes important on systems (like the Xilinx/AMD
zynqMP Ultrascale) where memory (or part of it) is mapped above the
32 bit range. On such systems and given that a device by default has
a dma mask of 32 bits we would then need to rely on bounce buffers (to
swiotlb) for mapping memory above the dma mask limit.
In the process, add an iio_buffer_get_dma_dev() helper function to get
the proper DMA device.
Cc: stable@vger.kernel.org
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document that the callback registered with iio_channel_get_all_cb()
must be safe to call from any context since it is called from by
iio_push_to_buffer() which can be called in any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document that the struct iio_buffer_access_funcs.store_to() callback
must be safe to call from any context since it is called from
iio_push_to_buffer() which may be called from any context.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Replace the documentation of iio_push_to_buffers_with_timestamp() with
a deprecation notice pointing to the preferred alternative.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Document the iio_push_to_buffers_with_ts() function.
This is copied and slightly cleaned up from
iio_push_to_buffers_with_timestamp().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Commit 6d4405b16d37 ("ata: libata-core: Cache the general purpose log
directory") introduced caching of a device general purpose log directory
to avoid repeated access to this log page during device scan. This
change also added a check on this log page to verify that the log page
version is 0x0001 as mandated by the ACS specifications.
And it turns out that some devices do not bother reporting this version,
instead reporting a version 0, resulting in error messages such as:
ata6.00: Invalid log directory version 0x0000
and to the device being marked as not supporting the general purpose log
directory log page.
Since before commit 6d4405b16d37 the log page version check did not
exist and things were still working correctly for these devices, relax
ata_read_log_directory() version check and only warn about the invalid
log page version number without disabling access to the log directory
page.
Fixes: 6d4405b16d37 ("ata: libata-core: Cache the general purpose log directory")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220635
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Alt Mode drivers are responsible for sending Enter Mode through the TCPM,
but only a DFP is allowed to send Enter Mode. typec_get_data_role gets
the port's data role, which can then be used in altmode drivers via
typec_altmode_get_data_role to know if Enter Mode should be sent.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250923181606.1583584-5-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This reverts commit 1a2b423be6a89dd07d5fc27ea042be68697a6a49 because we
got a regression report and need time to find out the details.
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/r/29ec0082-4dd4-4120-acd2-44b35b4b9487@oss.qualcomm.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
|
