| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit e12a42f64fc3d74872b349eedd47f90c6676b78a ]
The status code should be type of __le16.
Fixes: 83e897a961b8 ("wifi: ieee80211: add definitions for negotiated TID to Link map")
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250505081946.3927214-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c76c813cfc42a7376378a0c4b7250db2eebab81 ]
lookup_or_create_module_kobject() is marked as static and __init,
to make it global drop static keyword.
Since this function can be called from non-init code, use __modinit
instead of __init, __modinit marker will make it __init if
CONFIG_MODULES is not defined.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-4-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Stable-dep-of: f95bbfe18512 ("drivers: base: handle module_kobject creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c1a79b1a583654f24b17da81ba868b0064077243 ]
{bdev,disk}_zone_capacity() takes block_device or gendisk and sector position
and returns the zone capacity of the corresponding zone.
With that, move disk_nr_zones() and blk_zone_plug_bio() to consolidate them in
the same #ifdef block.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 866bafae59ec ("btrfs: zoned: skip reporting zone for new block group")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f7d1bab50e6ae517f8b6699e56d709d61ae13e5 ]
It is possible to have a scenario where not all cpufreq policies support
boost frequencies. And letting sysfs (or other parts of the kernel)
enable boost feature for that policy isn't correct.
Add a new flag, boost_supported, which will be set to true by the
cpufreq core only if the freq table contains valid boost frequencies.
Some cpufreq drivers though don't have boost frequencies in the
freq-table, they can set this flag from their ->init() callbacks.
Once all the drivers are updated to set the flag correctly, we can check
it before enabling boost feature for a policy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 3d59224947b0 ("cpufreq: ACPI: Re-sync CPU boost state on system resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b79028039f440e7d2c4df6ab243060c4e3803e84 upstream.
Commit 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and
policy->max") overlooked the fact that policy->min and policy->max were
accessed directly in cpufreq_frequency_table_target() and in the
functions called by it. Consequently, the changes made by that commit
led to problems with setting policy limits.
Address this by passing the target frequency limits to __resolve_freq()
and cpufreq_frequency_table_target() and propagating them to the
functions called by the latter.
Fixes: 7491cdf46b5c ("cpufreq: Avoid using inconsistent policy->min and policy->max")
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Closes: https://lore.kernel.org/linux-pm/aAplED3IA_J0eZN0@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/5896780.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 30a3f2f3e4bd6335b727c83c08a982d969752bc1 upstream.
In the review for iommu_copy_struct_to_user() helper, Matt pointed out that
a NULL pointer should be rejected prior to dereferencing it:
https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com
And Alok pointed out a typo at the same time:
https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com
Since both issues were copied from iommu_copy_struct_from_user(), fix them
first in the current header.
Fixes: e9d36c07bb78 ("iommu: Add iommu_copy_struct_from_user helper")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Link: https://lore.kernel.org/r/20250414191635.450472-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b16510a530d1e6ab9683f04f8fb34f2e0f538275 ]
Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa
implementation's ->key_size() callback returns an unusually large value.
Herbert instead suggests (for a division by 8):
X / 8 + !!(X & 7)
Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and
use it in lieu of DIV_ROUND_UP() for ->key_size() return values.
Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes"
parameter is a ->key_size() return value in some instances, or a
user-specified ASN.1 length in the case of ecdsa_get_signature_rs().
Link: https://lore.kernel.org/r/Z3iElsILmoSu6FuC@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ddf4bd3f738485c84edb98ff96a5759904498e70 upstream.
Some MACs require the PHY receive clock to be running to complete setup
actions. This may fail if the PHY has negotiated EEE, the MAC supports
receive clock stop, and the link has entered LPI state. Provide a pair
of APIs that MAC drivers can use to temporarily block the PHY disabling
the receive clock.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6k-008Vjt-MZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 367f1854d442b33c4a0305b068ae40d67ccd7d6a upstream.
When the system is suspended, the PHY may be placed in low-power mode
by setting the BMCR 0.11 Power down bit. IEEE 802.3 states that the
behaviour of the PHY in this state is implementation specific, and
the PHY is not required to meet the RX_CLK and TX_CLK requirements.
Essentially, this means that a PHY may stop the clocks that it is
generating while in power down state.
However, MACs exist which require the clocks from the PHY to be running
in order to properly resume. phylink_prepare_resume() provides them
with a way to clear the Power down bit early.
Note, however, that IEEE 802.3 gives PHYs up to 500ms grace before the
transmit and receive clocks meet the requirements after clearing the
power down bit.
Add a resume preparation function, which will ensure that the receive
clock from the PHY is appropriately configured while resuming.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tvO6V-008Vjb-AP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c63202140d4b411d27380805c4d68eb11407b7f2 ]
These are only to be used by block internal code. Remove the comment
as we grew more users due to reworking block device node opening.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250423053810.1683309-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 5f33b5226c9d ("block: don't autoload drivers on stat")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 961ee5aeea048aa292f28d61f3a96a48554e91af ]
Add helper which returns the tx amplitude gain defined in device tree.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-2-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 607b310ada5e ("net: dp83822: Fix OF_MDIO config check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf761e3dacc6ad5f65a4886d00da1f9681e6805a ]
Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3164d2e0d181027da8fc94f8179d8607c3d440f ]
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: cf761e3dacc6 ("PCI/MSI: Add an option to write MSIX ENTRY_DATA before any reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ee7be9e10dd5f79448788b899591d4bd2bf0c19 ]
The usage of __rcu in the Energy Model code is quite inconsistent
which causes the following sparse warnings to trigger:
kernel/power/energy_model.c:169:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:169:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:169:15: got struct em_perf_table *
kernel/power/energy_model.c:171:9: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:171:9: expected struct callback_head *head
kernel/power/energy_model.c:171:9: got struct callback_head [noderef] __rcu *
kernel/power/energy_model.c:171:9: warning: cast removes address space '__rcu' of expression
kernel/power/energy_model.c:182:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:182:19: expected struct kref *kref
kernel/power/energy_model.c:182:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:200:15: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:200:15: expected struct em_perf_table [noderef] __rcu *table
kernel/power/energy_model.c:200:15: got void *[assigned] _res
kernel/power/energy_model.c:204:20: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:204:20: expected struct kref *kref
kernel/power/energy_model.c:204:20: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:320:19: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:320:19: expected struct kref *kref
kernel/power/energy_model.c:320:19: got struct kref [noderef] __rcu *
kernel/power/energy_model.c:325:45: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:325:45: expected struct em_perf_state *table
kernel/power/energy_model.c:325:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:425:45: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:425:45: expected struct em_perf_state *table
kernel/power/energy_model.c:425:45: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:442:15: warning: incorrect type in argument 1 (different address spaces)
kernel/power/energy_model.c:442:15: expected void const *objp
kernel/power/energy_model.c:442:15: got struct em_perf_table [noderef] __rcu *[assigned] em_table
kernel/power/energy_model.c:626:55: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:626:55: expected struct em_perf_state *table
kernel/power/energy_model.c:626:55: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:681:16: warning: incorrect type in assignment (different address spaces)
kernel/power/energy_model.c:681:16: expected struct em_perf_state *new_ps
kernel/power/energy_model.c:681:16: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:699:37: warning: incorrect type in argument 2 (different address spaces)
kernel/power/energy_model.c:699:37: expected struct em_perf_state *table
kernel/power/energy_model.c:699:37: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:733:38: warning: incorrect type in argument 3 (different address spaces)
kernel/power/energy_model.c:733:38: expected struct em_perf_state *table
kernel/power/energy_model.c:733:38: got struct em_perf_state [noderef] __rcu *
kernel/power/energy_model.c:855:53: warning: dereference of noderef expression
kernel/power/energy_model.c:864:32: warning: dereference of noderef expression
This is because the __rcu annotation for sparse is only applicable to
pointers that need rcu_dereference() or equivalent for protection, which
basically means pointers assigned with rcu_assign_pointer().
Make all of the above sparse warnings go away by cleaning up the usage
of __rcu and using rcu_dereference_protected() where applicable.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/5885405.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd35b6cb46649750b7dbd0df0e2d767415d8917b ]
nfs.ko, nfsd.ko, and lockd.ko all use crc32_le(), which is available
only when CONFIG_CRC32 is enabled. But the only NFS kconfig option that
selected CONFIG_CRC32 was CONFIG_NFS_DEBUG, which is client-specific and
did not actually guard the use of crc32_le() even on the client.
The code worked around this bug by only actually calling crc32_le() when
CONFIG_CRC32 is built-in, instead hard-coding '0' in other cases. This
avoided randconfig build errors, and in real kernels the fallback code
was unlikely to be reached since CONFIG_CRC32 is 'default y'. But, this
really needs to just be done properly, especially now that I'm planning
to update CONFIG_CRC32 to not be 'default y'.
Therefore, make CONFIG_NFS_FS, CONFIG_NFSD, and CONFIG_LOCKD select
CONFIG_CRC32. Then remove the fallback code that becomes unnecessary,
as well as the selection of CONFIG_CRC32 from CONFIG_NFS_DEBUG.
Fixes: 1264a2f053a3 ("NFS: refactor code for calculating the crc32 hash of a filehandle")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9e888998ea4d22257b07ce911576509486fa0667 upstream.
inode_to_wb() is used also for filesystems that don't support cgroup
writeback. For these filesystems inode->i_wb is stable during the
lifetime of the inode (it points to bdi->wb) and there's no need to hold
locks protecting the inode->i_wb dereference. Improve the warning in
inode_to_wb() to not trigger for these filesystems.
Link: https://lkml.kernel.org/r/20250412163914.3773459-3-agruenba@redhat.com
Fixes: aaa2cacf8184 ("writeback: add lockdep annotation to inode_to_wb()")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 285b2c74cf9982e873ef82a2cb1328d9e9406f65 ]
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 459a35111b0a890172a78d51c01b204e13a34a18 upstream.
Convert HAVE_KVM_IRQ_BYPASS into a tristate so that selecting
IRQ_BYPASS_MANAGER follows KVM={m,y}, i.e. doesn't force irqbypass.ko to
be built-in.
Note, PPC allows building KVM as a module, but selects HAVE_KVM_IRQ_BYPASS
from a boolean Kconfig, i.e. KVM PPC unnecessarily forces irqbpass.ko to
be built-in. But that flaw is a longstanding PPC specific issue.
Fixes: 61df71ee992d ("kvm: move "select IRQ_BYPASS_MANAGER" to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315024623.2363994-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f5ee52d4f58605330b09851273d6e56aaadd29e upstream.
Patch series "mm/vmscan: don't try to reclaim hwpoison folio".
Fix a bug during memory reclaim if folio is hwpoisoned.
This patch (of 2):
Introduce helper folio_contain_hwpoisoned_page() to check if the entire
folio is hwpoisoned or it contains hwpoisoned pages.
Link: https://lkml.kernel.org/r/20250318083939.987651-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20250318083939.987651-2-tujinjiang@huawei.com
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 691ee97e1a9de0cdb3efb893c1f180e3f4a35e32 upstream.
Patch series "Fix lazy mmu mode", v2.
I'm planning to implement lazy mmu mode for arm64 to optimize vmalloc. As
part of that, I will extend lazy mmu mode to cover kernel mappings in
vmalloc table walkers. While lazy mmu mode is already used for kernel
mappings in a few places, this will extend it's use significantly.
Having reviewed the existing lazy mmu implementations in powerpc, sparc
and x86, it looks like there are a bunch of bugs, some of which may be
more likely to trigger once I extend the use of lazy mmu. So this series
attempts to clarify the requirements and fix all the bugs in advance of
that series. See patch #1 commit log for all the details.
This patch (of 5):
The docs, implementations and use of arch_[enter|leave]_lazy_mmu_mode() is
a bit of a mess (to put it politely). There are a number of issues
related to nesting of lazy mmu regions and confusion over whether the
task, when in a lazy mmu region, is preemptible or not. Fix all the
issues relating to the core-mm. Follow up commits will fix the
arch-specific implementations. 3 arches implement lazy mmu; powerpc,
sparc and x86.
When arch_[enter|leave]_lazy_mmu_mode() was first introduced by commit
6606c3e0da53 ("[PATCH] paravirt: lazy mmu mode hooks.patch"), it was
expected that lazy mmu regions would never nest and that the appropriate
page table lock(s) would be held while in the region, thus ensuring the
region is non-preemptible. Additionally lazy mmu regions were only used
during manipulation of user mappings.
Commit 38e0edb15bd0 ("mm/apply_to_range: call pte function with lazy
updates") started invoking the lazy mmu mode in apply_to_pte_range(),
which is used for both user and kernel mappings. For kernel mappings the
region is no longer protected by any lock so there is no longer any
guarantee about non-preemptibility. Additionally, for RT configs, the
holding the PTL only implies no CPU migration, it doesn't prevent
preemption.
Commit bcc6cc832573 ("mm: add default definition of set_ptes()") added
arch_[enter|leave]_lazy_mmu_mode() to the default implementation of
set_ptes(), used by x86. So after this commit, lazy mmu regions can be
nested. Additionally commit 1a10a44dfc1d ("sparc64: implement the new
page table range API") and commit 9fee28baa601 ("powerpc: implement the
new page table range API") did the same for the sparc and powerpc
set_ptes() overrides.
powerpc couldn't deal with preemption so avoids it in commit b9ef323ea168
("powerpc/64s: Disable preemption in hash lazy mmu mode"), which
explicitly disables preemption for the whole region in its implementation.
x86 can support preemption (or at least it could until it tried to add
support nesting; more on this below). Sparc looks to be totally broken in
the face of preemption, as far as I can tell.
powerpc can't deal with nesting, so avoids it in commit 47b8def9358c
("powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes"),
which removes the lazy mmu calls from its implementation of set_ptes().
x86 attempted to support nesting in commit 49147beb0ccb ("x86/xen: allow
nesting of same lazy mode") but as far as I can tell, this breaks its
support for preemption.
In short, it's all a mess; the semantics for
arch_[enter|leave]_lazy_mmu_mode() are not clearly defined and as a result
the implementations all have different expectations, sticking plasters and
bugs.
arm64 is aiming to start using these hooks, so let's clean everything up
before adding an arm64 implementation. Update the documentation to state
that lazy mmu regions can never be nested, must not be called in interrupt
context and preemption may or may not be enabled for the duration of the
region. And fix the generic implementation of set_ptes() to avoid
nesting.
arch-specific fixes to conform to the new spec will proceed this one.
These issues were spotted by code review and I have no evidence of issues
being reported in the wild.
Link: https://lkml.kernel.org/r/20250303141542.3371656-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20250303141542.3371656-2-ryan.roberts@arm.com
Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94ba17adaba0f651fdcf745c8891a88e2e028cfa upstream.
'paddr' DAMON operations set can apply a DAMOS scheme's action to a large
folio multiple times in single DAMOS-regions-walk if the folio is laid on
multiple DAMON regions. Add a field for DAMOS scheme object that can be
used by the underlying ops to know what was the last entity that the
scheme's action has applied. The core layer unsets the field when each
DAMOS-regions-walk is done for the given scheme. And update 'paddr' ops
to use the infrastructure to avoid the problem.
Link: https://lkml.kernel.org/r/20250207212033.45269-3-sj@kernel.org
Fixes: 57223ac29584 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Closes: https://lore.kernel.org/20250203225604.44742-3-usamaarif642@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c1fd374a2fe72b8a6dde62d3c3a9fd153e7581c upstream.
__VA_OPT__ is a macro that is useful when some arguments can be present
or not to entirely skip some part of a definition. Unfortunately, it
is a too recent addition that some of the still supported old GCC
versions do not know about, and is anyway not part of C11 that is the
version used in the kernel.
Find a trick to remove this macro, typically '__VA_ARGS__ + 0' is a
workaround used in netlink.h which works very well here, as we either
expect:
- 0
- A positive value
- No value, which means the field should be 0.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503181330.YcDXGy7F-lkp@intel.com/
Fixes: 7ce0d16d5802 ("mtd: spinand: Add an optional frequency to read from cache macros")
Cc: stable@vger.kernel.org
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6889ae1b4df1579bcdffef023e2ea9a982565dff upstream.
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity.
Cc: stable@vger.kernel.org
Fixes: a05d1f625c7aa ("io_uring/net: support bundles for send")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8b611dbb54d1cd47a88681f5d38c84d0c02bc563.1743067183.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0d24d4b1da96df9fc5ff36966f40f980ef864d46 ]
Do not clutter hid includes with stuff not needed outside of
the kernel.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de9e33df7762abbfc2a1568291f2c3a3154c6a9d ]
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20bbb083bbc9d3f8db390f2e35e168f1b23dae8a ]
Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.
Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit abdbf8764f4962af2a910abb3a213ecf304a73d3 ]
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3051bf5ec773b803c474ea556b57d678a8885be3 ]
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36de0164bbaff1484288e84ac5df5cff00580263 ]
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a4119108d2530747e61c7cbf52e2affd089cb1f6 ]
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc7c154e9bb3c2b98875cfc565406f4787e3b7a4 ]
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d5c7ce5bf4cc27db41632f357f682d0ee4518e7 ]
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo>
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Reviewed-by: Michał Kopeć <michal@nozomi.space>
Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Paul Dino Jones <paul@spacefreak18.xyz>
Tested-by: Cristóferson Bueno <cbueno81@gmail.com>
Tested-by: Pablo Cisneros <patchkez@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ea9a1781c70a8be1fcdc49134fc1bf4baba8bca ]
Kernels built with CONFIG_PREEMPT_RT=y can lose significant console output
and shutdown time, which hides shutdown-time RCU issues from rcutorture.
Therefore, make pr_flush() public and invoke it after then last print
in kernel_power_off().
[ paulmck: Apply John Ogness feedback. ]
[ paulmck: Appy Sebastian Andrzej Siewior feedback. ]
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/5f743488-dc2a-4f19-bdda-cf50b9314832@paulmck-laptop
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56799bc035658738f362acec3e7647bb84e68933 ]
Perf can hang while freeing a sigtrap event if a related deferred
signal hadn't managed to be sent before the file got closed:
perf_event_overflow()
task_work_add(perf_pending_task)
fput()
task_work_add(____fput())
task_work_run()
____fput()
perf_release()
perf_event_release_kernel()
_free_event()
perf_pending_task_sync()
task_work_cancel() -> FAILED
rcuwait_wait_event()
Once task_work_run() is running, the list of pending callbacks is
removed from the task_struct and from this point on task_work_cancel()
can't remove any pending and not yet started work items, hence the
task_work_cancel() failure and the hang on rcuwait_wait_event().
Task work could be changed to remove one work at a time, so a work
running on the current task can always cancel a pending one, however
the wait / wake design is still subject to inverted dependencies when
remote targets are involved, as pictured by Oleg:
T1 T2
fd = perf_event_open(pid => T2->pid); fd = perf_event_open(pid => T1->pid);
close(fd) close(fd)
<IRQ> <IRQ>
perf_event_overflow() perf_event_overflow()
task_work_add(perf_pending_task) task_work_add(perf_pending_task)
</IRQ> </IRQ>
fput() fput()
task_work_add(____fput()) task_work_add(____fput())
task_work_run() task_work_run()
____fput() ____fput()
perf_release() perf_release()
perf_event_release_kernel() perf_event_release_kernel()
_free_event() _free_event()
perf_pending_task_sync() perf_pending_task_sync()
rcuwait_wait_event() rcuwait_wait_event()
Therefore the only option left is to acquire the event reference count
upon queueing the perf task work and release it from the task work, just
like it was done before 3a5465418f5f ("perf: Fix event leak upon exec and file release")
but without the leaks it fixed.
Some adjustments are necessary to make it work:
* A child event might dereference its parent upon freeing. Care must be
taken to release the parent last.
* Some places assuming the event doesn't have any reference held and
therefore can be freed right away must instead put the reference and
let the reference counting to its job.
Reported-by: "Yi Lai" <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/all/Zx9Losv4YcJowaP%2F@ly-workstation/
Reported-by: syzbot+3c4321e10eea460eb606@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/673adf75.050a0220.87769.0024.GAE@google.com/
Fixes: 3a5465418f5f ("perf: Fix event leak upon exec and file release")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250304135446.18905-1-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c70ca298036c58a88686ff388d3d367e9d21acf0 ]
The error cleanup sequence in perf_event_alloc() is a subset of the
existing _free_event() function (it must of course be).
Split this out into __free_event() and simplify the error path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20241104135517.967889521@infradead.org
Stable-dep-of: 56799bc03565 ("perf: Fix hang while freeing sigtrap event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a22b3d54de94f82ca057cc2ebf9496fa91ebf698 ]
There is a possible race between removing a cgroup diectory that is
a partition root and the creation of a new partition. The partition
to be removed can be dying but still online, it doesn't not currently
participate in checking for exclusive CPUs conflict, but the exclusive
CPUs are still there in subpartitions_cpus and isolated_cpus. These
two cpumasks are global states that affect the operation of cpuset
partitions. The exclusive CPUs in dying cpusets will only be removed
when cpuset_css_offline() function is called after an RCU delay.
As a result, it is possible that a new partition can be created with
exclusive CPUs that overlap with those of a dying one. When that dying
partition is finally offlined, it removes those overlapping exclusive
CPUs from subpartitions_cpus and maybe isolated_cpus resulting in an
incorrect CPU configuration.
This bug was found when a warning was triggered in
remote_partition_disable() during testing because the subpartitions_cpus
mask was empty.
One possible way to fix this is to iterate the dying cpusets as well and
avoid using the exclusive CPUs in those dying cpusets. However, this
can still cause random partition creation failures or other anomalies
due to racing. A better way to fix this race is to reset the partition
state at the moment when a cpuset is being killed.
Introduce a new css_killed() CSS function pointer and call it, if
defined, before setting CSS_DYING flag in kill_css(). Also update the
css_is_dying() helper to use the CSS_DYING flag introduced by commit
33c35aa48178 ("cgroup: Prevent kill_css() from being called more than
once") for proper synchronization.
Add a new cpuset_css_killed() function to reset the partition state of
a valid partition root if it is being killed.
Fixes: ee8dde0cd2ce ("cpuset: Add new v2 cpuset.sched.partition flag")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 34929a070b7fd06c386080c926b61ee844e6ad34 upstream.
dl_rebuild_rd_accounting() is defined in cpuset.c, so it makes more
sense to move related declarations to cpuset.h.
Implement the move.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSOVMpU7jpVrMU@jlelli-thinkpadt14gen4.remote.csb
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa6192adc32f4fdfe5b74edd5b210e12afd6ecc0 upstream.
Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:
https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf
Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.
Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6309a5c43b0dc629851f25b2e5ef8beff61d08e5 ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. rcu_irq_work_resched() can be called from
noinstr code, so make sure it's always inlined.
Fixes: 564506495ca9 ("rcu/context-tracking: Move deferred nocb resched to context tracking")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/e84f15f013c07e4c410d972e75620c53b62c1b3e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ac50f7311dc8b39e355582f14c1e82da47a8196 ]
Thanks to CONFIG_DEBUG_SECTION_MISMATCH, empty functions can be
generated out of line. These can be called from noinstr code, so make
sure they're always inlined.
Fixes the following warnings:
vmlinux.o: warning: objtool: irqentry_nmi_enter+0xa2: call to ct_nmi_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_nmi_exit+0x16: call to ct_nmi_exit() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_exit+0x78: call to ct_irq_exit() leaves .noinstr.text section
Fixes: 6f0e6c1598b1 ("context_tracking: Take IRQ eqs entrypoints over RCU")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/8509bce3f536bcd4ae7af3a2cf6930d48c5e631a.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/d1eca076-fdde-484a-b33e-70e0d167c36d@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f37f2d7b21ff35b8b533f9ab8cfad2fe8f72f6 ]
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7ef8 ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e6ec8cf64e2973f0ec74f09023988cabd218426 ]
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa8e ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e767b59e29b8327d25edde65efc743f479f30d0a ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to manage the
delayed return of delegations, then only scan those filesystems
containing delegations that were marked as being delayed.
Fixes: be20037725d1 ("NFSv4: Fix delegation return in cases where we have to retry")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f163aa81a799e2d46d7f8f0b42a0e7770eaa0d06 ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to reap the
expired delegations, it should scan only those filesystems that hold
delegations that need to be reaped.
Fixes: 7f156ef0bf45 ("NFSv4: Clean up nfs_delegation_reap_expired()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 35a566a24e58f1b5f89737edf60b77de58719ed0 ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to return
delegations asynchronously, it should only scan those filesystems that
hold delegations that need to be returned.
Fixes: af3b61bf6131 ("NFSv4: Clean up nfs_client_return_marked_delegations()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cc4c3aa714bc58ec5d20f3054ca5f23534984d1 ]
In the commit dcc25ae76eb7 ("writeback: move global_dirty_limit into
wb_domain") of the cgroup writeback backpressure propagation patchset,
Tejun made some adaptations to trace_balance_dirty_pages() for cgroup
writeback. However, this adaptation was incomplete and Tejun missed
further adaptation in the subsequent patches.
In the cgroup writeback scenario, if sdtc in balance_dirty_pages() is
assigned to mdtc, then upon entering trace_balance_dirty_pages(),
__entry->limit should be assigned based on the dirty_limit of the
corresponding memcg's wb_domain, rather than global_wb_domain.
To address this issue and simplify the implementation, introduce a 'limit'
field in struct dirty_throttle_control to store the hard_limit value
computed in wb_position_ratio() by calling hard_dirty_limit(). This field
will then be used in trace_balance_dirty_pages() to assign the value to
__entry->limit.
Link: https://lkml.kernel.org/r/20250304110318.159567-4-yizhou.tang@shopee.com
Fixes: dcc25ae76eb7 ("writeback: move global_dirty_limit into wb_domain")
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1ab2831e2a4312046bca79256b2efc41d373eaf ]
Patch series "Fix calculations in trace_balance_dirty_pages() for cgwb", v2.
In my experiment, I found that the output of trace_balance_dirty_pages()
in the cgroup writeback scenario was strange because
trace_balance_dirty_pages() always uses global_wb_domain.dirty_limit for
related calculations instead of the dirty_limit of the corresponding
memcg's wb_domain.
The basic idea of the fix is to store the hard dirty limit value computed
in wb_position_ratio() into struct dirty_throttle_control and use it for
calculations in trace_balance_dirty_pages().
This patch (of 3):
Currently, trace_balance_dirty_pages() already has 12 parameters. In the
patch #3, I initially attempted to introduce an additional parameter.
However, in include/linux/trace_events.h, bpf_trace_run12() only supports
up to 12 parameters and bpf_trace_run13() does not exist.
To reduce the number of parameters in trace_balance_dirty_pages(), we can
make it accept a pointer to struct dirty_throttle_control as a parameter.
To achieve this, we need to move the definition of struct
dirty_throttle_control from mm/page-writeback.c to
include/linux/writeback.h.
Link: https://lkml.kernel.org/r/20250304110318.159567-1-yizhou.tang@shopee.com
Link: https://lkml.kernel.org/r/20250304110318.159567-2-yizhou.tang@shopee.com
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Tang Yizhou <yizhou.tang@shopee.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6cc4c3aa714b ("writeback: fix calculations in trace_balance_dirty_pages() for cgwb")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 318f05a057157c400a92f17c5f2fa3dd96f57c7e ]
Patch series "reboot: support runtime configuration of emergency
hw_protection action", v3.
We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
This is inadequate in the general case though as a driver reporting e.g.
an imminent power failure can't know whether a shutdown or a reboot would
be more appropriate for a given hardware platform.
To address this, this series adds a hw_protection kernel parameter and
sysfs toggle that can be used to change the action from the shutdown
default to reboot. A new hw_protection_trigger API then makes use of this
default action.
My particular use case is unattended embedded systems that don't have
support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
With this series, such systems can configure the kernel with
hw_protection=reboot to have the boot firmware worry about critical
conditions.
This patch (of 12):
Currently __hw_protection_shutdown() either reboots or shuts down the
system according to its shutdown argument.
To make the logic easier to follow, both inside __hw_protection_shutdown
and at caller sites, lets replace the bool parameter with an enum.
This will be extra useful, when in a later commit, a third action is added
to the enumeration.
No functional change.
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-0-e1c09b090c0c@pengutronix.de
Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-1-e1c09b090c0c@pengutronix.de
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Matteo Croce <teknoraver@meta.com>
Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: bbf0ec4f57e0 ("reboot: reboot, not shutdown, on hw_protection_reboot timeout")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d795e38df4b7ebac1072bbf7d8a5500c1ea83332 ]
Initial thought was to do something similar to __cond_lock()
do_iio_device_claim_direct_mode(iio_dev) ? : ({ __acquire(iio_dev); 0; })
+ Appropriate static inline iio_device_release_direct_mode()
However with that, sparse generates false positives. E.g.
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c:1811:17: warning: context imbalance in 'st_lsm6dsx_read_raw' - unexpected unlock
So instead, this patch rethinks the return type and makes it more
'conditional lock like' (which is part of what is going on under the hood
anyway) and return a boolean - true for successfully acquired, false for
did not acquire.
To allow a migration path given the rework is now non trivial, take a leaf
out of the naming of the conditional guard we currently have for IIO
device direct mode and drop the _mode postfix from the new functions giving
iio_device_claim_direct() and iio_device_release_direct()
Whilst the kernel supports __cond_acquires() upstream sparse does not
yet do so. Hence rely on sparse expanding a static inline wrapper
to explicitly see whether __acquire() is called.
Note that even with the solution here, sparse sometimes gives false
positives. However in the few cases seen they were complex code
structures that benefited from simplification anyway.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250209180624.701140-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 7021d97fb89b ("iio: adc: ad7173: Grab direct mode for calibration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ff6039ffb79a4a8a44b63810a8a2f2b43264856 ]
As recommended by section 4.3.7 ("Synchronization when using system
instructions to progrom the trace unit") of ARM IHI 0064H.b, the
self-hosted trace analyzer must perform a Context synchronization
event between writing to the TRCPRGCTLR and reading the TRCSTATR.
Additionally, add an ISB between the each read of TRCSTATR on
coresight_timeout() when using system instructions to program the
trace unit.
Fixes: 1ab3bb9df5e3 ("coresight: etm4x: Add necessary synchronization for sysreg access")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250116-etm_sync-v4-1-39f2b05e9514@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
