summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2012-01-03switch sysfs attr->mode to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->mknod() to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->create() to umode_tAl Viro
vfs_create() ignores everything outside of 16bit subset of its mode argument; switching it to umode_t is obviously equivalent and it's the only caller of the method Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch vfs_mkdir() and ->mkdir() to umode_tAl Viro
vfs_mkdir() gets int, but immediately drops everything that might not fit into umode_t and that's the only caller of ->mkdir()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch sys_mknodat(2) to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03fs: move code out of buffer.cAl Viro
Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: new helper - vfs_ustat()Al Viro
... and bury user_get_super()/statfs_by_dentry() - they are purely internal now. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: mnt_drop_write_file()Al Viro
new helper (wrapper around mnt_drop_write()) to be used in pair with mnt_want_write_file(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03constify seq_file stuffAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: make do_kern_mount() staticAl Viro
the only user outside of fs/namespace.c has died Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03vfs: convert fs_supers to hlistAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03unexport put_mnt_ns(), make create_mnt_ns() static outrightAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03pull manipulations of rpc_cred inside alloc_nfs_open_context()Al Viro
No need to duplicate them in both callers; make it return ERR_PTR(-ENOMEM) on allocation failure instead of NULL and it'll be able to report rpc_lookup_cred() failures just fine. Callers are much happier that way... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03net: phy: smsc: Move SMSC PHY constants to <linux/smscphy.h>Javier Martinez Canillas
SMSC generation 4 LAN chips integrate an IEEE 802.3 ethernet physical layer. The ethernet driver for this family of devices needs to access the SMSC PHY registers and bit-fields. So, this patch moves these constants to a place where it can be used for both the PHY and LAN drivers. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-03security: Fix security_old_inode_init_security() when CONFIG_SECURITY is not setJan Kara
Commit 1e39f384bb01 ("evm: fix build problems") makes the stub version of security_old_inode_init_security() return 0 when CONFIG_SECURITY is not set. But that makes callers such as reiserfs_security_init() assume that security_old_inode_init_security() has set name, value, and len arguments properly - but security_old_inode_init_security() left them uninitialized which then results in interesting failures. Revert security_old_inode_init_security() to the old behavior of returning EOPNOTSUPP since both callers (reiserfs and ocfs2) handle this just fine. [ Also fixed the S_PRIVATE(inode) case of the actual non-stub security_old_inode_init_security() function to return EOPNOTSUPP for the same reason, as pointed out by Mimi Zohar. It got incorrectly changed to match the new function in commit fb88c2b6cbb1: "evm: fix security/security_old_init_security return code". - Linus ] Reported-by: Jorge Bastos <mysql.jorge@decimal.pt> Acked-by: James Morris <jmorris@namei.org> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-03Merge branch 'mxs/clk-prepare' of ↵Arnd Bergmann
git://git.linaro.org/people/shawnguo/linux-2.6 into imx/clk
2012-01-03regulator: add regulator_bulk_force_disable functionDonggeun Kim
This patch allows consumers to forcibly disable multiple regulator clients in a single API call. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-03Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43/dma.c drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
2012-01-03pinctrl: remove unnecessary max pin numberChanho Park
This patch removes maxpin member in the pin control descriptor because we don't need this value as we enumerate a pin space using offset. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: pass name instead of device to pin_config_*Stephen Warren
Obtaining a "struct pinctrl_dev *" is difficult for code not directly related to the pinctrl subsystem. However, the device name of the pinctrl device is fairly well known. So, modify pin_config_*() to take the device name instead of the "struct pinctrl_dev *". Signed-off-by: Stephen Warren <swarren@nvidia.com> [rebased on top of refactoring code] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: add "struct seq_file;" to pinconf.hStephen Warren
This allows one to include pinconf.h without having to include other headers first. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: add a group-specific hog macroLinus Walleij
To create elegant tables for pinmux hogs on the PXA MMP platform, we need this hog macro that can specify both function and group in one go. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: don't create a device for each pin controllerStephen Warren
Pin controllers should already be instantiated as a device, so there's no need for the pinctrl core to create a new struct device for each controller. This allows the controller's real name to be used in the mux mapping table, rather than e.g. "pinctrl.0", "pinctrl.1", etc. This necessitates removal of the PINMUX_MAP_PRIMARY*() macros, since their sole purpose was to hard-code the .ctrl_dev_name field to be "pinctrl.0". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: implement PINMUX_MAP_SYS_HOGStephen Warren
This is the same as PINMUX_MAP_PRIMARY_SYS_HOG, except that it allows you to specify a particular control device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: add a pin config interfaceLinus Walleij
This add per-pin and per-group pin config interfaces for biasing, driving and other such electronic properties. The details of passed configurations are passed in an opaque unsigned long which may be dereferences to integer types, structs or lists on either side of the configuration interface. ChangeLog v1->v2: - Clear split of terminology: we now have pin controllers, and those may support two interfaces using vtables: pin multiplexing and pin configuration. - Break out pin configuration to its own C file, controllers may implement only config without mux, and vice versa, so keep each sub-functionality of pin controllers separate. Introduce CONFIG_PINCONF in Kconfig. - Implement some core logic around pin configuration in the pinconf.c file. - Remove UNKNOWN config states, these were just surplus baggage. - Remove FLOAT config state - HIGH_IMPEDANCE should be enough for everyone. - PIN_CONFIG_POWER_SOURCE added to handle switching the power supply for the pin logic between different sources - Explicit DISABLE config enums to turn schmitt-trigger, wakeup etc OFF. - Update documentation to reflect all the recent reasoning. ChangeLog v2->v3: - Twist API around to pass around arrays of config tuples instead of (param, value) pairs everywhere. - Explicit drive strength semantics for push/pull and similar drive modes, this shall be the number of drive stages vs nominal load impedance, which should match the actual electronics used in push/pull CMOS or TTY totempoles. - Drop load capacitance configuration - I probably don't know what I'm doing here so leave it out. - Drop PIN_CONFIG_INPUT_SCHMITT_OFF, instead the argument zero to PIN_CONFIG_INPUT_SCHMITT turns schmitt trigger off. - Drop PIN_CONFIG_NORMAL_POWER_MODE and have a well defined argument to PIN_CONFIG_LOW_POWER_MODE to get out of it instead. - Drop PIN_CONFIG_WAKEUP_ENABLE/DISABLE and just use PIN_CONFIG_WAKEUP with defined value zero to turn wakeup off. - Add PIN_CONFIG_INPUT_DEBOUNCE for configuring debounce time on input lines. - Fix a bug when we tried to configure pins for pin controllers without pinconf support. - Initialized debugfs properly so it works. - Initialize the mutex properly and lock around config tampering sections. - Check the return value from get_initial_config() properly. ChangeLog v3->v4: - Export the pin_config_get(), pin_config_set() and pin_config_group() functions. - Drop the entire concept of just getting initial config and keeping track of pin states internally, instead ask the pins what state they are in. Previous idea was plain wrong, if the device cannot keep track of its state, the driver should do it. - Drop the generic configuration layout, it seems this impose too much restriction on some pin controllers, so let them do things the way they want and split off support for generic config as an optional add-on. ChangeLog v4->v5: - Introduce two symmetric driver calls for group configuration, .pin_config_group_[get|set] and corresponding external calls. - Remove generic semantic meanings of return values from config calls, these belong in the generic config patch. Just pass the return value through instead. - Add a debugfs entry "pinconf-groups" to read status from group configuration only, also slam in a per-group debug callback in the pinconf_ops so custom drivers can display something meaningful for their pins. - Fix some dangling newline. - Drop dangling #else clause. - Update documentation to match the above. ChangeLog v5->v6: - Change to using a pin name as parameter for the [get|set]_config() functions, as suggested by Stephen Warren. This is more natural as names will be what a developer has access to in written documentation etc. ChangeLog v6->v7: - Refactor out by-pin and by-name get/set functions, only expose the by-name functions externally, expose the by-pin functions internally. - Show supported pin control functionality in the debugfs pinctrl-devices file. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: make a copy of pinmux mapLinus Walleij
This makes a deep copy of the pinmux function map instead of keeping the copy supplied from the platform around. This makes it possible to tag the platforms map with __initdata as is also done as part of this patch. Rationale: a certain target platform (PXA) has numerous pinmux maps, many of which will be lying around unused after boot in a multi-platform binary. Instead, deep-copy the one we're going to use and tag them all __initdata so they go away after boot. ChangeLog v1->v2: - Fixup the deep copy, missed a few items on the struct, plus mark bool member non-const since we're making runtime copies if this stuff now. ChangeLog v2->v3: - Make a shallow copy (just copy the array of map structs) as Arnd noticed, string constants never get discarded by the kernel anyway, so these pointers may be safely copied over. Reviewed-by: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: GPIO direction support for muxingLinus Walleij
When requesting a single GPIO pin to be muxed in, some controllers will need to poke a different value into the control register depending on whether the pin will be used for GPIO output or GPIO input. So create pinmux counterparts to gpio_direction_[input|output] in the pinctrl framework. ChangeLog v1->v2: - This also amends the documentation to make it clear the this function and associated machinery is *ONLY* intended as a backend to gpiolib machinery, not for everyone and his dog to start playing around with pins. ChangeLog v2->v3: - Don't pass an argument to the common request function, instead provide pinmux_* counterparts to the gpio_direction_[input|output] calls, simpler and anyone can understand it. ChangeLog v3->v4: - Fix numerous spelling mistakes and dangling text in documentation. Add Ack and Rewewed-by. Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: add a pin_base for sparse gpio-rangesChanho Park
This patch enables mapping a base offset of gpio ranges with a pin offset even if does'nt matched. A base of pinctrl_gpio_range means a base offset of gpio. However, we cannot convert gpio to pin number for sparse gpio ranges just only using a gpio base offset. We can convert a gpio to real pin number(even if not matched) using a new pin_base which means a base pin offset of requested gpio range. Now, the pin control subsystem passes the pin base offset to the pinmux driver. For example, let's assume below two gpio ranges in the system. static struct pinctrl_gpio_range gpio_range_a = { .name = "chip a", .id = 0, .base = 32, .pin_base = 32, .npins = 16, .gc = &chip_a; }; static struct pinctrl_gpio_range gpio_range_b = { .name = "chip b", .id = 0, .base = 48, .pin_base = 64, .npins = 8, .gc = &chip_b; }; We can calucalate a exact pin ranges even if doesn't matched with gpio ranges. chip a: gpio-range : [32 .. 47] pin-range : [32 .. 47] chip b: gpio-range : [48 .. 55] pin-range : [64 .. 71] Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-03pinctrl: add explicit gpio_disable_free pinmux_opStephen Warren
Some pinctrl drivers (Tegra at least) program a pin to be a GPIO in a completely different manner than they select which function to mux out of that pin. In order to support a single "free" pinmux_op, the driver would need to maintain a per-pin state of requested-for-gpio vs. requested-for- function. However, that's a lot of work when the core already has explicit separate paths for gpio request/free and function request/free. So, add a gpio_disable_free op to struct pinmux_ops, and make pin_free() call it when appropriate. When doing this, I noticed that when calling pin_request(): !!gpio == (gpio_range != NULL) ... and so I collapsed those two parameters in both pin_request(), and when adding writing the new code in pin_free(). Also, for pin_free(): !!free_func == (gpio_range != NULL) However, I didn't want pin_free() to know about the GPIO function naming special case, so instead, I reworked pin_free() to always return the pin's previously requested function, and now pinmux_free_gpio() calls kfree(function). This is much more balanced with the allocation having been performed in pinmux_request_gpio(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-02regulator: add regulator_force_disable() definition for !CONFIG_REGULATORMyungJoo Ham
regulator_force_disable() was omitted in consumer.h for !CONFIG_REGULATOR case. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-31[media] dvb-core: be sure that drivers won't use DVBv3 internallyMauro Carvalho Chehab
Now that all frontends are implementing DVBv5, don't export the DVBv3 specific stuff to the drivers. Only the core should be aware of that, as it will keep providing DVBv3 backward compatibility. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30Input: add driver for pixcir i2c touchscreensJianchun Bian
This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by: Jianchun <jcbian@pixcir.com.cn> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-30unix_diag: Fixup RQLEN extension reportPavel Emelyanov
While it's not too late fix the recently added RQLEN diag extension to report rqlen and wqlen in the same way as TCP does. I.e. for listening sockets the ack backlog length (which is the input queue length for socket) in rqlen and the max ack backlog length in wqlen, and what the CINQ/OUTQ ioctls do for established. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30unix_diag: Add the MEMINFO extensionPavel Emelyanov
[ Fix indentation of sock_diag*() calls. -DaveM ] Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30inet_diag: Add the SKMEMINFO extensionPavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30sock_diag: Introduce the meminfo nla core (v2)Pavel Emelyanov
Add a routine that dumps memory-related values of a socket. It's made as an array to make it possible to add more stuff here later without breaking compatibility. Since v1: The SK_MEMINFO_ constants are in userspace visible part of sock_diag.h, the rest is under __KERNEL__. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30unix_diag: Include unix_diag.h into header-y targetPavel Emelyanov
The headers check complains it should include the linux/types.h withing, thus add this one. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30sock_diag: Arrange sock_diag.h such that it is exportable to userspacePavel Emelyanov
Properly toss existing components around the ifdef __KERNEL__ and include the header into the header-y target. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-12-30[media] v4l: Add new alpha component controlSylwester Nawrocki
The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture or memory-to-memory devices that are capable of setting up the per-pixel alpha component to some arbitrary value. It allows to set the alpha component for all pixels to an arbitrary value. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30Merge tag 'v3.2-rc7' into staging/for_v3.3Mauro Carvalho Chehab
Linux 3.2-rc7 * tag 'v3.2-rc7': (1304 commits) Linux 3.2-rc7 netfilter: xt_connbytes: handle negation correctly Btrfs: call d_instantiate after all ops are setup Btrfs: fix worker lock misuse in find_worker net: relax rcvbuf limits rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt() net: introduce DST_NOPEER dst flag mqprio: Avoid panic if no options are provided bridge: provide a mtu() method for fake_dst_ops md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays. sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq(). pata_of_platform: Add missing CONFIG_OF_IRQ dependency. ipv4: using prefetch requires including prefetch.h VFS: Fix race between CPU hotplug and lglocks vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL USB: Fix usb/isp1760 build on sparc net: Add a flow_cache_flush_deferred function ... Conflicts: drivers/media/common/tuners/tda18218.c drivers/media/video/omap3isp/ispccdc.c drivers/staging/media/as102/as102_drv.h
2011-12-28jbd2: clear revoked flag on buffers before a new transaction startedYongqiang Yang
Currently, we clear revoked flag only when a block is reused. However, this can tigger a false journal error. Consider a situation when a block is used as a meta block and is deleted(revoked) in ordered mode, then the block is allocated as a data block to a file. At this moment, user changes the file's journal mode from ordered to journaled and truncates the file. The block will be considered re-revoked by journal because it has revoked flag still pending from the last transaction and an assertion triggers. We fix the problem by keeping the revoked status more uptodate - we clear revoked flag when switching revoke tables to reflect there is no revoked buffers in current transaction any more. Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-12-28dt: add empty of_get_node/of_put_node functionsRob Herring
Add empty of_get_node/of_put_node functions for !CONFIG_OF builds. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-28clk: add helper functions clk_prepare_enable and clk_disable_unprepareRichard Zhao
It's for migrating to generic clk framework API. The helper functions help cases clk_enable/clk_disable is used in non-atomic context. For example, Call clk_enable in probe and clk_disable in remove. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-27Input: add driver for AUO In-Cell touchscreens using pixcir ICsHeiko Stübner
Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-28Merge branch 'samsung/cleanup' into next/driversArnd Bergmann
Dependency for the samsung/drivers branch Conflicts: arch/arm/mach-exynos/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-27Merge branch 'v3.2-rc6' into next/driversArnd Bergmann
2011-12-27Merge branch 'omap/hwmod' into next/driversArnd Bergmann
This is needed as a dependency for omap/ehci. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-27Merge branch 'pm-freezer' into pm-for-linusRafael J. Wysocki
* pm-freezer: PM / Freezer: fix return value of freezable_schedule_timeout_killable()
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-16 02:30:34 +0000