| Age | Commit message (Collapse) | Author |
|---|
|
The scratch field in struct xfs_gc_bio is unused. Remove it.
Fixes: 102f444b57b3 ("xfs: rework zone GC buffer management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is currently unused, as now we are doing compounding instead
(see smb2_query_path_info()).
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
SMB311_posix_query_info() is currently unused, but it may still be used in
some stable versions, so these changes are submitted as a separate patch.
Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer,
so the allocated buffer matches the actual struct size.
Fixes: b1bc1874b885 ("smb311: Add support for SMB311 query info (non-compounded)")
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use `sizeof(struct smb311_posix_qinfo)` instead of sizeof its pointer,
so the allocated buffer matches the actual struct size.
Fixes: 6a5f6592a0b6 ("SMB311: Add support for query info using posix extensions (level 100)")
Reported-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"One-liner or short fixes for minor/moderate problems reported recently:
- fixes or level adjustments of error messages
- fix leaked transaction handles after aborted transactions, when
using the remap tree feature
- fix a few leaked chunk maps after errors
- fix leaked page array in io_uring encoded read if an error occurs
and the 'finished' is not called
- fix double release of reserved extents when doing a range COW
- don't commit super block when the filesystem is in shutdown state
- fix squota accounting condition when checking members vs parent
usage
- other error handling fixes"
* tag 'for-7.0-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: check block group lookup in remove_range_from_remap_tree()
btrfs: fix transaction handle leaks in btrfs_last_identity_remap_gone()
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_translate_remap()
btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies()
btrfs: fix compat mask in error messages in btrfs_check_features()
btrfs: print correct subvol num if active swapfile prevents deletion
btrfs: fix warning in scrub_verify_one_metadata()
btrfs: fix objectid value in error message in check_extent_data_ref()
btrfs: fix incorrect key offset in error message in check_dev_extent_item()
btrfs: fix error message order of parameters in btrfs_delete_delayed_dir_index()
btrfs: don't commit the super block when unmounting a shutdown filesystem
btrfs: free pages on error in btrfs_uring_read_extent()
btrfs: fix referenced/exclusive check in squota_check_parent_usage()
btrfs: remove pointless WARN_ON() in cache_save_setup()
btrfs: convert log messages to error level in btrfs_replay_log()
btrfs: remove btrfs_handle_fs_error() after failure to recover log trees
btrfs: remove redundant warning message in btrfs_check_uuid_tree()
btrfs: change warning messages to error level in open_ctree()
btrfs: fix a double release on reserved extents in cow_one_range()
btrfs: handle discard errors in in btrfs_finish_extent_commit()
|
|
It's defined twice in a row for the !CONFIG_PRINTK case, so remove one
of the duplicates.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we fail to remove an item from the uuid tree, we don't need to abort
the transaction since we have not done any change before. So remove that
transaction abort.
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we failed to update the root we don't abort the transaction, which is
wrong since we already used the transaction to remove an item from the
uuid tree.
Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon.
Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Anand Jain <asj@kernel.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesystem into RO mode and disrupt a system.
Reproducer script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# Create a subvolume and set it to RO so that it can be used for send.
btrfs subvolume create $MNT/sv
touch $MNT/sv/foo
btrfs property set $MNT/sv ro true
# Send and receive the subvolume into snaps/sv.
mkdir $MNT/snaps
btrfs send $MNT/sv | btrfs receive $MNT/snaps
# Now snapshot the received subvolume, which has a received_uuid, a
# lot of times to trigger the leaf overflow.
total=500
for ((i = 1; i <= $total; i++)); do
echo -ne "\rCreating snapshot $i/$total"
btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null
done
echo
umount $MNT
When running the test:
$ ./test.sh
(...)
Create subvolume '/mnt/sdi/sv'
At subvol /mnt/sdi/sv
At subvol sv
Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type
Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system
And in dmesg/syslog:
$ dmesg
(...)
[251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252!
[251067.629212] ------------[ cut here ]------------
[251067.630033] BTRFS: Transaction aborted (error -75)
[251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235
[251067.632851] Modules linked in: btrfs dm_zero (...)
[251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[251067.646165] Tainted: [W]=WARN
[251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs]
[251067.649984] Code: f0 48 0f (...)
[251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292
[251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3
[251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750
[251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820
[251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0
[251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5
[251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000
[251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0
[251067.661972] Call Trace:
[251067.662292] <TASK>
[251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs]
[251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs]
[251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs]
[251067.665238] ? _raw_spin_unlock+0x15/0x30
[251067.665837] ? record_root_in_trans+0xa2/0xd0 [btrfs]
[251067.666531] btrfs_mksubvol+0x330/0x580 [btrfs]
[251067.667145] btrfs_mksnapshot+0x74/0xa0 [btrfs]
[251067.667827] __btrfs_ioctl_snap_create+0x194/0x1d0 [btrfs]
[251067.668595] btrfs_ioctl_snap_create_v2+0x107/0x130 [btrfs]
[251067.669479] btrfs_ioctl+0x1580/0x2690 [btrfs]
[251067.670093] ? count_memcg_events+0x6d/0x180
[251067.670849] ? handle_mm_fault+0x1a0/0x2a0
[251067.671652] __x64_sys_ioctl+0x92/0xe0
[251067.672406] do_syscall_64+0x50/0xf20
[251067.673129] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[251067.674096] RIP: 0033:0x7f2a495648db
[251067.674812] Code: 00 48 89 (...)
[251067.678227] RSP: 002b:00007ffc5aa57840 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[251067.679691] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2a495648db
[251067.681145] RDX: 00007ffc5aa588b0 RSI: 0000000050009417 RDI: 0000000000000004
[251067.682511] RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
[251067.683842] R10: 000000000000000a R11: 0000000000000246 R12: 00007ffc5aa59910
[251067.685176] R13: 00007ffc5aa588b0 R14: 0000000000000004 R15: 0000000000000006
[251067.686524] </TASK>
[251067.686972] ---[ end trace 0000000000000000 ]---
[251067.687890] BTRFS: error (device sdi state A) in create_pending_snapshot:1907: errno=-75 unknown
[251067.689049] BTRFS info (device sdi state EA): forced readonly
[251067.689054] BTRFS warning (device sdi state EA): Skipping commit of aborted transaction.
[251067.690119] BTRFS: error (device sdi state EA) in cleanup_transaction:2043: errno=-75 unknown
[251067.702028] BTRFS info (device sdi state EA): last unmount of filesystem 46dc3975-30a2-4a69-a18f-418b859cccda
Fix this by ignoring -EOVERFLOW errors from btrfs_uuid_tree_add() in the
snapshot creation code when attempting to add the
BTRFS_UUID_KEY_RECEIVED_SUBVOL item. This is OK because it's not critical
and we are still able to delete the snapshot, as snapshot/subvolume
deletion ignores if a BTRFS_UUID_KEY_RECEIVED_SUBVOL is missing (see
inode.c:btrfs_delete_subvolume()). As for send/receive, we can still do
send/receive operations since it always peeks the first root ID in the
existing BTRFS_UUID_KEY_RECEIVED_SUBVOL (it could peek any since all
snapshots have the same content), and even if the key is missing, it
falls back to searching by BTRFS_UUID_KEY_SUBVOL key.
A test case for fstests will be sent soon.
Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree")
CC: stable@vger.kernel.org # 3.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we attempt to create several files with names that result in the same
hash, we have to pack them in same dir item and that has a limit inherent
to the leaf size. However if we reach that limit, we trigger a transaction
abort and turns the filesystem into RO mode. This allows for a malicious
user to disrupt a system, without the need to have administration
privileges/capabilities.
Reproducer:
$ cat exploit-hash-collisions.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster and require fewer file
# names that result in hash collision.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# List of names that result in the same crc32c hash for btrfs.
declare -a names=(
'foobar'
'%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC'
'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z'
'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4'
'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:'
'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO'
'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us'
'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY'
'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO'
'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU'
'Ono7avN5GjC:_6dBJ_'
'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am'
'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k'
'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2'
'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd'
'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm'
'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ'
'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky'
'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS'
'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz'
'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu'
'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN'
'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4='
'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn'
'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C'
'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW'
'8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc'
'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mCaaKGxb990jzaagRktDTyp'
'9hD2ApKa_t_7x-a@GCG28kY:7$M@5udI1myQ$x5udtggvagmCQcq9QXWRC5hoB0o-_zHQUqZI5rMcz_kbMgvN5jr63LeYA4Cj-c6F5Ugmx6DgVf@2Jqm%MafecpgooqreJ53P-QTS'
)
# Now create files with all those names in the same parent directory.
# It should not fail since a 4K leaf has enough space for them.
for name in "${names[@]}"; do
touch $MNT/$name
done
# Now add one more file name that causes a crc32c hash collision.
# This should fail, but it should not turn the filesystem into RO mode
# (which could be exploited by malicious users) due to a transaction
# abort.
touch $MNT/'W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt'
# Check that we are able to create another file, with a name that does not cause
# a crc32c hash collision.
echo -n "hello world" > $MNT/baz
# Unmount and mount again, verify file baz exists and with the right content.
umount $MNT
mount $DEV $MNT
echo "File baz content: $(cat $MNT/baz)"
umount $MNT
When running the reproducer:
$ ./exploit-hash-collisions.sh
(...)
touch: cannot touch '/mnt/sdi/W6tIm-VK2@BGC@IBfcgg6j_p:pxp_QUqtWpGD5Ok_GmijKOJJt': Value too large for defined data type
./exploit-hash-collisions.sh: line 57: /mnt/sdi/baz: Read-only file system
cat: /mnt/sdi/baz: No such file or directory
File baz content:
And the transaction abort stack trace in dmesg/syslog:
$ dmesg
(...)
[758240.509761] ------------[ cut here ]------------
[758240.510668] BTRFS: Transaction aborted (error -75)
[758240.511577] WARNING: fs/btrfs/inode.c:6854 at btrfs_create_new_inode+0x805/0xb50 [btrfs], CPU#6: touch/888644
[758240.513513] Modules linked in: btrfs dm_zero (...)
[758240.523221] CPU: 6 UID: 0 PID: 888644 Comm: touch Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[758240.524621] Tainted: [W]=WARN
[758240.525037] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[758240.526331] RIP: 0010:btrfs_create_new_inode+0x80b/0xb50 [btrfs]
[758240.527093] Code: 0f 82 cf (...)
[758240.529211] RSP: 0018:ffffce64418fbb48 EFLAGS: 00010292
[758240.529935] RAX: 00000000ffffffd3 RBX: 0000000000000000 RCX: 00000000ffffffb5
[758240.531040] RDX: 0000000d04f33e06 RSI: 00000000ffffffb5 RDI: ffffffffc0919dd0
[758240.531920] RBP: ffffce64418fbc10 R08: 0000000000000000 R09: 00000000ffffffb5
[758240.532928] R10: 0000000000000000 R11: ffff8e52c0000000 R12: ffff8e53eee7d0f0
[758240.533818] R13: ffff8e57f70932a0 R14: ffff8e5417629568 R15: 0000000000000000
[758240.534664] FS: 00007f1959a2a740(0000) GS:ffff8e5b27cae000(0000) knlGS:0000000000000000
[758240.535821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[758240.536644] CR2: 00007f1959b10ce0 CR3: 000000012a2cc005 CR4: 0000000000370ef0
[758240.537517] Call Trace:
[758240.537828] <TASK>
[758240.538099] btrfs_create_common+0xbf/0x140 [btrfs]
[758240.538760] path_openat+0x111a/0x15b0
[758240.539252] do_filp_open+0xc2/0x170
[758240.539699] ? preempt_count_add+0x47/0xa0
[758240.540200] ? __virt_addr_valid+0xe4/0x1a0
[758240.540800] ? __check_object_size+0x1b3/0x230
[758240.541661] ? alloc_fd+0x118/0x180
[758240.542315] do_sys_openat2+0x70/0xd0
[758240.543012] __x64_sys_openat+0x50/0xa0
[758240.543723] do_syscall_64+0x50/0xf20
[758240.544462] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[758240.545397] RIP: 0033:0x7f1959abc687
[758240.546019] Code: 48 89 fa (...)
[758240.548522] RSP: 002b:00007ffe16ff8690 EFLAGS: 00000202 ORIG_RAX: 0000000000000101
[758240.566278] RAX: ffffffffffffffda RBX: 00007f1959a2a740 RCX: 00007f1959abc687
[758240.567068] RDX: 0000000000000941 RSI: 00007ffe16ffa333 RDI: ffffffffffffff9c
[758240.567860] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[758240.568707] R10: 00000000000001b6 R11: 0000000000000202 R12: 0000561eec7c4b90
[758240.569712] R13: 0000561eec7c311f R14: 00007ffe16ffa333 R15: 0000000000000000
[758240.570758] </TASK>
[758240.571040] ---[ end trace 0000000000000000 ]---
[758240.571681] BTRFS: error (device sdi state A) in btrfs_create_new_inode:6854: errno=-75 unknown
[758240.572899] BTRFS info (device sdi state EA): forced readonly
Fix this by checking for hash collision, and if the adding a new name is
possible, early in btrfs_create_new_inode() before we do any tree updates,
so that we don't need to abort the transaction if we cannot add the new
name due to the leaf size limit.
A test case for fstests will be sent soon.
Fixes: caae78e03234 ("btrfs: move common inode creation code into btrfs_create_new_inode()")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix move_existing_remaps() so that if we increment the slot because the
key we encounter isn't a REMAP_BACKREF, we don't reuse the objectid and
offset of the old item.
Link: https://lore.kernel.org/linux-btrfs/20260125123908.2096548-1-clm@meta.com/
Reported-by: Chris Mason <clm@fb.com>
Fixes: bbea42dfb91f ("btrfs: move existing remaps before relocating block group")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
try_release_subpage_extent_buffer()
Call rcu_read_lock() before exiting the loop in
try_release_subpage_extent_buffer() because there is a rcu_read_unlock()
call past the loop.
This has been detected by the Clang thread-safety analyzer.
Fixes: ad580dfa388f ("btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()")
CC: stable@vger.kernel.org # 6.18+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.count == 1
Phase 2:
Create a delayed iput for a file in the subvol but leave the subvol in
state where its dentry can be evicted (d_lockref.count == 0)
T1 (task) T2 (writeback) T3 (OE workqueue)
write() // dirty pages
btrfs_writepages()
btrfs_run_delalloc_range()
cow_file_range()
btrfs_alloc_ordered_extent()
igrab() // i_count: 1 -> 2
btrfs_unlink_inode()
btrfs_orphan_add()
close()
__fput()
dput()
finish_dput()
__dentry_kill()
dentry_unlink_inode()
iput() // 2 -> 1
--parent->d_lockref.count // 1 -> 0; evictable
finish_ordered_fn()
btrfs_finish_ordered_io()
btrfs_put_ordered_extent()
btrfs_add_delayed_iput()
Phase 3:
Once the delayed iput is pending and the subvol dentry is evictable,
the shrinker can free it, causing the next lookup to go through
btrfs_lookup() and call btrfs_orphan_cleanup() for the first time.
If the cleaner kthread processes the delayed iput concurrently, the
two race:
T1 (shrinker) T2 (cleaner kthread) T3 (lookup)
super_cache_scan()
prune_dcache_sb()
__dentry_kill()
// subvol dentry freed
btrfs_run_delayed_iputs()
iput() // i_count -> 0
evict() // sets I_FREEING
btrfs_evict_inode()
// truncation loop
btrfs_lookup()
btrfs_lookup_dentry()
btrfs_orphan_cleanup()
// first call (bit never set)
btrfs_iget()
// blocks on I_FREEING
btrfs_orphan_del()
// inode freed
// returns -ENOENT
btrfs_del_orphan_item()
// -ENOENT
// "could not do orphan cleanup -2"
d_splice_alias(NULL, dentry)
// negative dentry for valid subvol
The most straightforward fix is to ensure the invariant that a dentry
for a subvolume can exist if and only if that subvolume has
BTRFS_ROOT_ORPHAN_CLEANUP set on its root (and is known to have no
orphans or ran btrfs_orphan_cleanup()).
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_zoned_reserve_data_reloc_bg() is called on each mount of a file
system and allocates a new block-group, to assign it to be the dedicated
relocation target, if no pre-existing usable block-group for this task is
found.
If for some reason the transaction is aborted, btrfs_end_transaction()
will wake up the transaction kthread. But the transaction kthread is not
yet initialized at the time btrfs_zoned_reserve_data_reloc_bg() is
called, leading to the following NULL-pointer dereference:
RSP: 0018:ffffc9000c617c98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 000000000000073c RCX: 0000000000000002
RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000001
RBP: 0000000000000207 R08: ffffffff8223c71d R09: 0000000000000635
R10: ffff888108588000 R11: 0000000000000003 R12: 0000000000000003
R13: 000000000000073c R14: 0000000000000000 R15: ffff888114dd6000
FS: 00007f2993745840(0000) GS:ffff8882b508d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000073c CR3: 0000000121a82006 CR4: 0000000000770eb0
PKRU: 55555554
Call Trace:
<TASK>
try_to_wake_up (./include/linux/spinlock.h:557 kernel/sched/core.c:4106)
__btrfs_end_transaction (fs/btrfs/transaction.c:1115 (discriminator 2))
btrfs_zoned_reserve_data_reloc_bg (fs/btrfs/zoned.c:2840)
open_ctree (fs/btrfs/disk-io.c:3588)
btrfs_get_tree.cold (fs/btrfs/super.c:982 fs/btrfs/super.c:1944 fs/btrfs/super.c:2087 fs/btrfs/super.c:2121)
vfs_get_tree (fs/super.c:1752)
__do_sys_fsconfig (fs/fsopen.c:231 fs/fsopen.c:295 fs/fsopen.c:473)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)
RIP: 0033:0x7f299392740e
Move the call to btrfs_zoned_reserve_data_reloc_bg() after the
transaction_kthread has been initialized to fix this problem.
Fixes: 694ce5e143d6 ("btrfs: zoned: reserve data_reloc block group on mount")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_set_periodic_reclaim_ready() requires space_info->lock to be held,
as enforced by lockdep_assert_held(). However, btrfs_reclaim_sweep() was
calling it after do_reclaim_sweep() returns, at which point
space_info->lock is no longer held.
Fix this by explicitly acquiring space_info->lock before clearing the
periodic reclaim ready flag in btrfs_reclaim_sweep().
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208182556.891815-1-clm@meta.com/
Fixes: 19eff93dc738 ("btrfs: fix periodic reclaim condition")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Sun YangKai <sunk67188@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add the definitions for the remap tree to print-tree.c, so that we get
more useful information if a tree is dumped to dmesg.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, all filesystems that support fsverity (ext4, f2fs, and btrfs)
cache the Merkle tree in the pagecache at a 64K aligned offset after the
end of the file data. This offset needs to be a multiple of the page
size, which is guaranteed only when the page size is 64K or smaller.
64K was chosen to be the "largest reasonable page size". But it isn't
the largest *possible* page size: the hexagon and powerpc ports of Linux
support 256K pages, though that configuration is rarely used.
For now, just disable support for FS_VERITY in these odd configurations
to ensure it isn't used in cases where it would have incorrect behavior.
Fixes: 671e67b47e9f ("fs-verity: add Kconfig and the helper functions for hashing")
Reported-by: Christoph Hellwig <hch@lst.de>
Closes: https://lore.kernel.org/r/20260119063349.GA643@lst.de
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20260221204525.30426-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Restore previous nfsd thread count reporting behavior
- Fix credential reference leaks in the NFSD netlink admin protocol
* tag 'nfsd-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: report the requested maximum number of threads instead of number running
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
|
|
To make it easier to locate the documentation during development.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Build the SMB2 maperror KUnit tests as `smb2maperror_test.ko`.
Link: https://lore.kernel.org/linux-cifs/20260210081040.4156383-1-geert@linux-m68k.org/
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
|
|
Pull smb client fixes from Steve French:
- Two multichannel fixes
- Locking fix for superblock flags
- Fix to remove debug message that could log password
- Cleanup fix for setting credentials
* tag 'v7.0rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Use snprintf in cifs_set_cifscreds
smb: client: Don't log plaintext credentials in cifs_set_cifscreds
smb: client: fix broken multichannel with krb5+signing
smb: client: use atomic_t for mnt_cifs_flags
smb: client: fix cifs_pick_channel when channels are equally loaded
|
|
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-2-d2c2853313bd@kernel.org
Fixes: 5222470b2fbb ("nsfs: support file handles")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.18+
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-1-d2c2853313bd@kernel.org
Fixes: a1d220d9dafa ("nsfs: iterate through mount namespaces")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Two issues were noticed after the NFS v4.0 KConfig changes were merged
upstream. First, the text of CONFIG_NFS_V4 should not encourage people
to select it if they are unsure. Second, the new CONFIG_NFS_V4_0 option
should default to "on" instead of "off" to avoid breaking people's
setups if they are using NFS v4.0.
Reported-by: Niklas Cassel <cassel@kernel.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 4e0269352534 ("NFS: Add a way to disable NFS v4.0 via KConfig")
Fixes: 7537db24806f ("NFS: Merge CONFIG_NFS_V4_1 with CONFIG_NFS_V4")
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Pull xfs fixes from Carlos Maiolino:
"Nothing reeeally stands out here: a few bug fixes, some refactoring to
easily fit the bug fixes, and a couple cosmetic changes"
* tag 'xfs-fixes-7.0-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: add static size checks for ioctl UABI
xfs: remove duplicate static size checks
xfs: Add comments for usages of some macros.
xfs: Update lazy counters in xfs_growfs_rt_bmblock()
xfs: Add a comment in xfs_log_sb()
xfs: Fix xfs_last_rt_bmblock()
xfs: don't report half-built inodes to fserror
xfs: don't report metadata inodes to fserror
xfs: fix potential pointer access race in xfs_healthmon_get
xfs: fix xfs_group release bug in xfs_dax_notify_dev_failure
xfs: fix xfs_group release bug in xfs_verify_report_losses
xfs: fix copy-paste error in previous fix
xfs: Fix error pointer dereference
xfs: remove metafile inodes from the active inode stat
xfs: cleanup inode counter stats
xfs: fix code alignment issues in xfs_ondisk.c
xfs: Replace &rtg->rtg_group with rtg_group()
xfs: Refactoring the nagcount and delta calculation
xfs: Replace ASSERT with XFS_IS_CORRUPT in xfs_rtcopy_summary()
|
|
Replace unbounded sprintf() calls with the safer snprintf(). Avoid using
magic numbers and use strlen() to calculate the key descriptor buffer
size. Save the size in a local variable and reuse it for the bounded
snprintf() calls. Remove CIFSCREDS_DESC_SIZE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When debug logging is enabled, cifs_set_cifscreds() logs the key
payload and exposes the plaintext username and password. Remove the
debug log to avoid exposing credentials.
Fixes: 8a8798a5ff90 ("cifs: fetch credentials out of keyring for non-krb5 auth multiuser mounts")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When mounting a share with 'multichannel,max_channels=n,sec=krb5i',
the client was duplicating signing key for all secondary channels,
thus making the server fail all commands sent from secondary channels
due to bad signatures.
Every channel has its own signing key, so when establishing a new
channel with krb5 auth, make sure to use the new session key as the
derived key to generate channel's signing key in SMB2_auth_kerberos().
Repro:
$ mount.cifs //srv/share /mnt -o multichannel,max_channels=4,sec=krb5i
$ sleep 5
$ umount /mnt
$ dmesg
...
CIFS: VFS: sign fail cmd 0x5 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
CIFS: VFS: sign fail cmd 0x5 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
CIFS: VFS: sign fail cmd 0x4 message id 0x2
CIFS: VFS: \\srv SMB signature verification returned error = -13
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use atomic_t for cifs_sb_info::mnt_cifs_flags as it's currently
accessed locklessly and may be changed concurrently in mount/remount
and reconnect paths.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Pull smb server fixes from Steve French:
- auth security improvement
- fix potential buffer overflow in smbdirect negotiation
* tag 'v7.0-rc1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
ksmbd: Compare MACs in constant time
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 7 are cc:stable. 8 are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-02-26-14-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: update Yosry Ahmed's email address
mailmap: add entry for Daniele Alessandrelli
mm: fix NULL NODE_DATA dereference for memoryless nodes on boot
mm/tracing: rss_stat: ensure curr is false from kthread context
mm/kfence: fix KASAN hardware tag faults during late enablement
mm/damon/core: disallow non-power of two min_region_sz
Squashfs: check metadata block offset is within range
MAINTAINERS, mailmap: update e-mail address for Vlastimil Babka
liveupdate: luo_file: remember retrieve() status
mm: thp: deny THP for files on anonymous inodes
mm: change vma_alloc_folio_noprof() macro to inline function
mm/kfence: disable KFENCE upon KASAN HW tags enablement
|
|
Add a check in remove_range_from_remap_tree() after we call
btrfs_lookup_block_group(), to check if it is NULL. This shouldn't
happen, but if it does we at least get an error rather than a segfault.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125129.2245240-1-clm@meta.com/
Fixes: 979e1dc3d69e ("btrfs: handle deletions from remapped block group")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_abort_transaction(), unlike btrfs_commit_transaction(), doesn't
also free the transaction handle. Fix the instances in
btrfs_last_identity_remap_gone() where we're also leaking the
transaction on abort.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125129.2245240-1-clm@meta.com/
Fixes: 979e1dc3d69e ("btrfs: handle deletions from remapped block group")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the call to btrfs_translate_remap() in btrfs_map_block() returns an
error code, we were leaking the chunk map. Fix it by jumping to out
rather than returning directly.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125830.2352988-1-clm@meta.com/
Fixes: 18ba64992871 ("btrfs: redirect I/O for remapped block groups")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_chunk_map_num_copies()
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up.
Fixes: 0ae653fbec2b ("btrfs: reduce chunk_map lookups in btrfs_map_block()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit d7f67ac9a928 ("btrfs: relax block-group-tree feature dependency
checks") introduced a regression when it comes to handling unsupported
incompat or compat_ro flags. Beforehand we only printed the flags that
we didn't recognize, afterwards we printed them all, which is less
useful. Fix the error handling so it behaves like it used to.
Fixes: d7f67ac9a928 ("btrfs: relax block-group-tree feature dependency checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix the error message in btrfs_delete_subvolume() if we can't delete a
subvolume because it has an active swapfile: we were printing the number
of the parent rather than the target.
Fixes: 60021bd754c6 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit b471965fdb2d ("btrfs: fix replace/scrub failure with
metadata_uuid") fixed the comparison in scrub_verify_one_metadata() to
use metadata_uuid rather than fsid, but left the warning as it was. Fix
it so it matches what we're doing.
Fixes: b471965fdb2d ("btrfs: fix replace/scrub failure with metadata_uuid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix a copy-paste error in check_extent_data_ref(): we're printing root
as in the message above, we should be printing objectid.
Fixes: f333a3c7e832 ("btrfs: tree-checker: validate dref root and objectid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix the error message in check_dev_extent_item(), when an overlapping
stripe is encountered. For dev extents, objectid is the disk number and
offset the physical address, so prev_key->objectid should actually be
prev_key->offset.
(I can't take any credit for this one - this was discovered by Chris and
his friend Claude.)
Reported-by: Chris Mason <clm@fb.com>
Fixes: 008e2512dc56 ("btrfs: tree-checker: add dev extent item checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix the error message in btrfs_delete_delayed_dir_index() if
__btrfs_add_delayed_item() fails: the message says root, inode, index,
error, but we're actually passing index, root, inode, error.
Fixes: adc1ef55dc04 ("btrfs: add details to error messages at btrfs_delete_delayed_dir_index()")
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When unmounting a filesystem we will try, among many other things, to
commit the super block. On a filesystem that was shutdown, though, this
will always fail with -EROFS as writes are forbidden on this context;
and an error will be reported.
Don't commit the super block on this situation, which should be fine as
the filesystem is frozen before shutdown and, therefore, it should be at
a consistent state.
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In this function the 'pages' object is never freed in the hopes that it is
picked up by btrfs_uring_read_finished() whenever that executes in the
future. But that's just the happy path. Along the way previous
allocations might have gone wrong, or we might not get -EIOCBQUEUED from
btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a
cleanup section that frees all memory allocated by this function without
assuming any deferred execution, and this also needs to happen for the
'pages' allocation.
Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We compared rfer_cmpr against excl_cmpr_sum instead of rfer_cmpr_sum
which is confusing.
I expect that
rfer_cmpr == excl_cmpr in squota, but it is much better to be consistent
in case of any surprises or bugs.
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/cover.1764796022.git.boris@bur.io/T/#mccb231643ffd290b44a010d4419474d280be5537
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This WARN_ON(ret) is never executed since the previous if statement makes
us jump into the 'out_put' label when ret is not zero. The existing
transaction abort inside the if statement also gives us a stack trace,
so we don't need to move the WARN_ON(ret) into the if statement either.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are logging messages as warnings but they should really have an error
level instead, as if the respective conditions are met the mount will
fail. So convert them to error level and also log the error code returned
by read_tree_block().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is no need to call btrfs_handle_fs_error() (which we are trying to
deprecate) if we fail to recover log trees:
1) Such a failure results in failing the mount immediately;
2) If the recovery started a transaction before failing, it has already
aborted the transaction down in the call chain.
So remove the btrfs_handle_fs_error() call, replace it with an error
message and assert that the FS is in error state (so that no partial
updates are committed due to a transaction that was not aborted).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
