| Age | Commit message (Collapse) | Author |
|---|
|
When CONFIG_FIXED_PHY=m but CONFIG_B44=y, the kernel fails to link:
ld.lld: error: undefined symbol: fixed_phy_unregister
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_remove_one) in archive vmlinux.a
ld.lld: error: undefined symbol: fixed_phy_register_100fd
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_register_phy_one) in archive vmlinux.a
The fixed phy support is small enough that just always enabling it
for b44 is the simplest solution, and it avoids adding ugly #ifdef
checks.
Fixes: 10d2f15afba2 ("net: b44: register a fixed phy using fixed_phy_register_100fd if needed")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260320154927.674555-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since 0417adf367a0 ("ppp: fix race conditions in ppp_fill_forward_path")
dev_fill_forward_path() should be called with RCU read lock held. This
fix was applied to net, while the Airoha flowtable commit was applied to
net-next, so it hadn't been an issue until net was merged into net-next.
Fixes: a8bdd935d1dd ("net: airoha: Add wlan flowtable TX offload")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260320094315.525126-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The for_each_endpoint_of_node() macro requires calling of_node_put() on the
endpoint node when breaking out of the loop early.
Add of_node_put(endpoint) before the early return to release the reference.
Fixes: cf3287fb2c1f ("PCI/pwrctrl: Ensure that remote endpoint node parent has supply requirement")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260323-pwctrl-v1-1-f5c03a2df7fb@gmail.com
|
|
As reported by AI review [1], if the refillqs allocation fails, refillqs
will be NULL but num_refillqs will be non-zero. The release function
will then dereference refillqs since it thinks the refillqs are present,
resulting in a NULL ptr dereference.
Only assign the num refillqs if the allocation was successful. This will
prevent the release function from entering the loop and accessing
refillqs.
[1] https://lore.kernel.org/netdev/20260227035625.2632753-1-kuba@kernel.org/
Fixes: 95af467d9a4e3 ("idpf: configure resources for RX queues")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Deinit calls idpf_idc_deinit_core_aux_device to free the cdev_info
memory, but leaves the adapter->cdev_info field with a stale pointer
value. This will bypass subsequent "if (!cdev_info)" checks if cdev_info
is not reallocated. For example, if idc_init fails after a reset,
cdev_info will already have been freed during the reset handling, but it
will not have been reallocated. The next reset or rmmod will result in a
crash.
[ +0.000008] BUG: kernel NULL pointer dereference, address: 00000000000000d0
[ +0.000033] #PF: supervisor read access in kernel mode
[ +0.000020] #PF: error_code(0x0000) - not-present page
[ +0.000017] PGD 2097dfa067 P4D 0
[ +0.000017] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ +0.000018] RIP: 0010:device_del+0x3e/0x3d0
[ +0.000010] Call Trace:
[ +0.000010] <TASK>
[ +0.000012] idpf_idc_deinit_core_aux_device+0x36/0x70 [idpf]
[ +0.000034] idpf_vc_core_deinit+0x3e/0x180 [idpf]
[ +0.000035] idpf_remove+0x40/0x1d0 [idpf]
[ +0.000035] pci_device_remove+0x42/0xb0
[ +0.000020] device_release_driver_internal+0x19c/0x200
[ +0.000024] driver_detach+0x48/0x90
[ +0.000018] bus_remove_driver+0x6d/0x100
[ +0.000023] pci_unregister_driver+0x2e/0xb0
[ +0.000022] __do_sys_delete_module.isra.0+0x18c/0x2b0
[ +0.000025] ? kmem_cache_free+0x2c2/0x390
[ +0.000023] do_syscall_64+0x107/0x7d0
[ +0.000023] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Pass the adapter struct into idpf_idc_deinit_core_aux_device instead and
clear the cdev_info ptr.
Fixes: f4312e6bfa2a ("idpf: implement core RDMA auxiliary dev create, init, and destroy")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fixes: 64430f70ba6f ("iavf: Fix displaying queue statistics shown by ethtool")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_repr_get_stats64() and __ice_get_ethtool_stats() call
ice_update_vsi_stats() on the VF's src_vsi. This always returns early
because ICE_VSI_DOWN is permanently set for VF VSIs - ice_up() is never
called on them since queues are managed by iavf through virtchnl.
In __ice_get_ethtool_stats() the original code called
ice_update_vsi_stats() for all VSIs including representors, iterated
over ice_gstrings_vsi_stats[] to populate the data, and then bailed out
with an early return before the per-queue ring stats section. That early
return was necessary because representor VSIs have no rings on the PF
side - the rings belong to the VF driver (iavf), so accessing per-queue
stats would be invalid.
Move the representor handling to the top of __ice_get_ethtool_stats()
and call ice_update_eth_stats() directly to read the hardware GLV_*
counters. This matches ice_get_vf_stats() which already uses
ice_update_eth_stats() for the same VF VSI in legacy mode. Apply the
same fix to ice_repr_get_stats64().
Note that ice_gstrings_vsi_stats[] contains five software ring counters
(rx_buf_failed, rx_page_failed, tx_linearize, tx_busy, tx_restart) that
are always zero for representors since the PF never processes packets on
VF rings. This is pre-existing behavior unchanged by this patch.
Fixes: 7aae80cef7ba ("ice: add port representor ethtool ops and stats")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With the move to explicit pwrctrl power on/off APIs, the caller, i.e., the
PCI controller driver, should manage the power state. The pwrctrl drivers
should not try to clean up or power off when they are removed, as this
might end up disabling an already disabled regulator, causing a big
warning. This can be triggered if a PCI controller driver's .remove()
callback calls pci_pwrctrl_destroy_devices() after
pci_pwrctrl_power_off_devices().
Drop the devm cleanup parts that turn off regulators from the pwrctrl
drivers.
Fixes: b921aa3f8dec ("PCI/pwrctrl: Switch to pwrctrl create, power on/off, destroy APIs")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260226092234.3859740-1-wenst@chromium.org
|
|
Commit 0f00a897c9fcbd ("ice: check if SF is ready in ethtool ops")
refactored the VF readiness check into a generic repr->ops.ready()
callback but implemented ice_repr_ready_vf() with inverted logic:
return !ice_check_vf_ready_for_cfg(repr->vf);
ice_check_vf_ready_for_cfg() returns 0 on success, so the negation
makes ready() return non-zero when the VF is ready. All callers treat
non-zero as "not ready, skip", causing ndo_get_stats64, get_drvinfo,
get_strings and get_ethtool_stats to always bail out in switchdev mode.
Remove the erroneous negation. The SF variant ice_repr_ready_sf() is
already correct (returns !active, i.e. non-zero when not active).
Fixes: 0f00a897c9fcbd ("ice: check if SF is ready in ethtool ops")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When allocating netdevice using alloc_etherdev_mqs() the maximum
supported queues number should be passed. The vsi->alloc_txq/rxq is
storing current number of queues, not the maximum ones.
Use the same function for getting max Tx and Rx queues which is used
during ethtool -l call to set maximum number of queues during netdev
allocation.
Reproduction steps:
$ethtool -l $pf # says current 16, max 64
$ethtool -S $pf # fine
$ethtool -L $pf combined 40 # crash
[491187.472594] Call Trace:
[491187.472829] <TASK>
[491187.473067] netif_set_xps_queue+0x26/0x40
[491187.473305] ice_vsi_cfg_txq+0x265/0x3d0 [ice]
[491187.473619] ice_vsi_cfg_lan_txqs+0x68/0xa0 [ice]
[491187.473918] ice_vsi_cfg_lan+0x2b/0xa0 [ice]
[491187.474202] ice_vsi_open+0x71/0x170 [ice]
[491187.474484] ice_vsi_recfg_qs+0x17f/0x230 [ice]
[491187.474759] ? dev_get_min_mp_channel_count+0xab/0xd0
[491187.474987] ice_set_channels+0x185/0x3d0 [ice]
[491187.475278] ethnl_set_channels+0x26f/0x340
Fixes: ee13aa1a2c5a ("ice: use netif_get_num_default_rss_queues()")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 470891606c5a97b1d0d937e0aa67a3bed9fcb056)
Cc: stable@vger.kernel.org
|
|
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d82e0a72d9189e8acd353988e1a57f85ce479e37)
Cc: stable@vger.kernel.org
|
|
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a900344546 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 17f11bbbc76c8e83c8474ea708316b1e3631d927)
|
|
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5)
Cc: stable@vger.kernel.org
|
|
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d)
Cc: stable@vger.kernel.org
|
|
amdgpu_device_get_job_timeout_settings() passes a pointer directly
to the global amdgpu_lockup_timeout[] buffer into strsep().
strsep() destructively replaces delimiter characters with '\0'
in-place.
On multi-GPU systems, this function is called once per device.
When a multi-value setting like "0,0,0,-1" is used, the first
GPU's call transforms the global buffer into "0\00\00\0-1". The
second GPU then sees only "0" (terminated at the first '\0'),
parses a single value, hits the single-value fallthrough
(index == 1), and applies timeout=0 to all rings — causing
immediate false job timeouts.
Fix this by copying into a stack-local array before calling
strsep(), so the global module parameter buffer remains intact
across calls. The buffer is AMDGPU_MAX_TIMEOUT_PARAM_LENGTH
(256) bytes, which is safe for the stack.
v2: wrap commit message to 72 columns, add Assisted-by tag.
v3: use stack array with strscpy() instead of kstrdup()/kfree()
to avoid unnecessary heap allocation (Christian).
This patch was developed with assistance from Claude (claude-opus-4-6).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94d79f51efecb74be1d88dde66bdc8bfcca17935)
Cc: stable@vger.kernel.org
|
|
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5004
Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check")
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)
|
|
meson_spicc_probe() registers the controller with
devm_spi_register_controller(), so teardown already drops the
controller reference via devm cleanup.
Calling spi_controller_put() again in meson_spicc_remove()
causes a double-put.
Fixes: 8311ee2164c5 ("spi: meson-spicc: fix memory leak in meson_spicc_remove")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260322-rockchip-v1-1-fac3f0c6dad8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to devm_mutex_init() to handle mutex destruction automatically.
This simplifies the error paths in probe() and removes the need for an
explicit mutex_destroy() in remove() callback.
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260319-sn-f-v1-2-33a6738d2da8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In f_ospi_probe(), when num_cs validation fails, it returns without
calling spi_controller_put() on the SPI controller, which causes a
resource leak.
Use devm_spi_alloc_host() instead of spi_alloc_host() to ensure the
SPI controller is properly freed when probe fails.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260319-sn-f-v1-1-33a6738d2da8@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When an error is returned from xe_sriov_pf_migration_restore_produce(),
the data pointer is not set to NULL, which can trigger use-after-free
in subsequent .write() calls.
Set the pointer to NULL upon error to fix the problem.
Fixes: 1ed30397c0b92 ("drm/xe/pf: Add support for encap/decap of bitstream to/from packet")
Reported-by: Sebastian Österlund <sebastian.osterlund@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7230
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260217154118.176902-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fixes kernel hang during boot due to inability to set up IRQ on AXP313a.
The issue is caused by gpiochip_lock_as_irq() which is failing when gpio
is in uninitialized state.
Solution is to set pinmux to GPIO INPUT in
sunxi_pinctrl_irq_request_resources() if it wasn't initialized
earlier.
Tested on Orange Pi Zero 3.
Fixes: 01e10d0272b9 ("pinctrl: sunxi: Implement gpiochip::get_direction()")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Recent changes in the Allwinner pinctrl/GPIO IP made us add some quirks,
which the new SoCs (A523 family) need to use. We now have a comfortable
"flags" field on the per-SoC setup side, to tag those quirks we need, but
were translating those flag bits into specific fields for runtime use, in
the init routine.
Now the newest Allwinner GPIO IP adds even more quirks and exceptions,
some of a boolean nature.
To avoid inventing various new boolean flags for the runtime struct
sunxi_pinctrl, let's just directly pass on the flags variable used by the
setup code, so runtime can check for those various quirk bits directly.
Rename the "variant" member to "flags", and directly copy the value from
the setup code into there. Move the variant masking from the init
routine to the functions which actually use the "variant" value.
This mostly paves the way for the new A733 IP generation, which needs
more quirks to be checked at runtime.
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add a freeze handler which clears wakeup_mode. This fixes aborted hibernation on
Dell Precision 3880.
Wakeup event detected during hibernation, rolling back
This system sends power button events during hibernation, even when triggered by
software.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218634
Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Link: https://patch.msgid.link/20260205231629.1336348-1-corngood@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for tablet models GZ302EA and GZ302EAC.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260313004939.4103835-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The ASUS ROG Flow Z13-KJP GZ302EAC model uses sys_vendor name ASUS
rather than ASUSTeK COMPUTER INC., but it needs the same folio quirk as
the other ROG Flow Z13. To keep things simple, just match on sys_vendor
ASUS since it covers both.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260312212246.1608080-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Fix a typo in the HSMP error message where "tmeout" should be "timeout".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260310125307.700108-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The command length check validates inlen (> 5), but the error message
incorrectly printed resp_len. Print inlen so the log reflects the
actual command length.
Fixes: 0c3d931b3ab9e ("Platform: OLPC: Add XO-1.75 EC driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260310130138.700687-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The gz_chain_head variable has been unused since the driver's initial
addition to the tree. Its use was eliminated between v3 and v4 during
development but due to the reference of gz_chain_head's wait_list
member, the compiler could not warn that it was unused.
After a (tip) commit ("locking/rwsem: Remove the list_head from struct
rw_semaphore"), which removed a reference to the variable passed to
__RWSEM_INITIALIZER(), certain configurations show an unused variable
warning from the Lenovo wmi-gamezone driver:
drivers/platform/x86/lenovo/wmi-gamezone.c:34:31: warning: 'gz_chain_head' defined but not used [-Wunused-variable]
34 | static BLOCKING_NOTIFIER_HEAD(gz_chain_head);
| ^~~~~~~~~~~~~
include/linux/notifier.h:119:39: note: in definition of macro 'BLOCKING_NOTIFIER_HEAD'
119 | struct blocking_notifier_head name = \
| ^~~~
Remove the variable to prevent the warning from showing up.
Fixes: 22024ac5366f ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260313-lenovo-wmi-gamezone-remove-gz_chain_head-v1-1-ce5231f0c6fa@kernel.org
[ij: reorganized the changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
On some systems, HWP can be explicitly disabled in the BIOS settings
When HWP is disabled by firmware, the HWP CPUID bit is not set, and
attempting to read MSR_PM_ENABLE will result in a General Protection
(GP) fault.
unchecked MSR access error: RDMSR from 0x770 at rIP: 0xffffffffc33db92e (disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core])
Call Trace:
<TASK>
? ex_handler_msr+0xf6/0x150
? fixup_exception+0x1ad/0x340
? gp_try_fixup_and_notify+0x1e/0xb0
? exc_general_protection+0xc9/0x390
? terminate_walk+0x64/0x100
? asm_exc_general_protection+0x22/0x30
? disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core]
isst_if_def_ioctl+0xece/0x1050 [isst_tpmi_core]
? ioctl_has_perm.constprop.42+0xe0/0x130
isst_if_def_ioctl+0x10d/0x1a0 [isst_if_common]
__se_sys_ioctl+0x86/0xc0
do_syscall_64+0x8a/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
RIP: 0033:0x7f36eaef54a7
Add a check for X86_FEATURE_HWP before accessing the MSR. If HWP is
not available, return true safely.
Fixes: 12a7d2cb811d ("platform/x86: ISST: Add SST-CP support via TPMI")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260303074635.2218-1-lirongqing@baidu.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HP Omen 16-k0xxx (board ID: 8A4D) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A4D confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Qinfeng Wu <qwqgong@gmail.com>
Reported-by: Qinfeng Wu <qwqgong@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221150
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260302073525.71037-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HP Omen 16-wf1xxx (board ID: 8C76) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to board 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C76 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: WJ Enderlava <jie7172585@gmail.com>
Reported-by: WJ Enderlava <jie7172585@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221149
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260227154106.226809-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.
Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.
Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)
Signed-off-by: Raed <thisisraed@outlook.com>
Link: https://patch.msgid.link/20260311131338.965249-1-youaretalkingtoraed@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model G614FP.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GA503QM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A recently reported issue highlighted that the cached requested_freq
is not guaranteed to stay in sync with policy->cur. If the platform
changes the actual CPU frequency after the governor sets one (e.g.
due to platform-specific frequency scaling) and a re-sync occurs
later, policy->cur may diverge from requested_freq.
This can lead to incorrect behavior in the conservative governor.
For example, the governor may assume the CPU is already running at
the maximum frequency and skip further increases even though there
is still headroom.
Avoid this by resetting the cached requested_freq to policy->cur on
detecting a change in policy limits.
Reported-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Tested-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://lore.kernel.org/all/20260210115458.3493646-1-zhenglifeng1@huawei.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/d846a141a98ac0482f20560fcd7525c0f0ec2f30.1773999467.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The commit 6db0f533d320 ("cpufreq: preserve freq_table_sorted
across suspend/hibernate") unintentionally made a change where
cpufreq_frequency_table_cpuinfo() isn't getting called anymore
for old policies getting re-initialized.
This leads to potentially invalid values of policy->max and
policy->cpuinfo_max_freq.
Fix the issue by reverting the original commit and adding the condition
for just the sorting function.
Fixes: 6db0f533d320 ("cpufreq: preserve freq_table_sorted across suspend/hibernate")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 6.19+ <stable@vger.kernel.org> # 6.19+
Link: https://patch.msgid.link/65ba5c45749267c82e8a87af3dc788b37a0b3f48.1773998611.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of grouping several different reset lines into one composite
reset, decouple them to individual ones which make it more aligned
with underlying hardware. And for DWC USB driver, it will match well
with the number of the reset property in the DT bindings.
The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
Also three reset lines each for UCIE and RCPU block.
As an agreement with maintainer, the reset IDs has been rearranged as
contiguous number but keep most part unchanged to avoid break patches
which already sent to mailing list. The changes of DT binding header file
and reset driver are merged together as one single commit to avoid
git-bisect breakage.
Fixes: 938ce3b16582 ("reset: spacemit: Add SpacemiT K3 reset driver")
Fixes: 216e0a5e98e5 ("dt-bindings: soc: spacemit: Add K3 reset support and IDs")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
When __auxiliary_device_add() fails, reset_add_gpio_aux_device()
calls auxiliary_device_uninit(adev).
The device release callback reset_gpio_aux_device_release() frees
adev, but the current error path then calls kfree(adev) again,
causing a double free.
Keep kfree(adev) for the auxiliary_device_init() failure path, but
avoid freeing adev after auxiliary_device_uninit().
Fixes: 5fc4e4cf7a22 ("reset: gpio: use software nodes to setup the GPIO lookup")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
devm_regmap_init_mmio() returns an ERR_PTR() on failure, not NULL.
The original code checked for NULL which would never trigger on error,
potentially leading to an invalid pointer dereference.
Use IS_ERR() and PTR_ERR() to properly handle the error case.
Fixes: e88500247dc3 ("gpio: add QIXIS FPGA GPIO controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260320-qixis-v1-1-a8efc22e8945@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Shared GPIOs may be assigned to child nodes of device nodes which don't
themselves bind to any struct device. We need to pass the firmware node
that is the actual consumer to gpiolib-shared and compare against it
instead of unconditionally using the fwnode of the consumer device.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/921ba8ce-b18e-4a99-966d-c763d22081e2@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260318-gpio-shared-xlate-v2-2-0ce34c707e81@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
OF-based GPIO controller drivers may provide a translation function that
calculates the real chip offset from whatever devicetree sources
provide. We need to take this into account in the shared GPIO management
and call of_xlate() if it's provided and adjust the entry->offset we
initially set when scanning the tree.
To that end: modify the shared GPIO API to take the GPIO chip as
argument on setup (to avoid having to rcu_dereference() it from the GPIO
device) and protect the access to entry->offset with the existing lock.
Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/921ba8ce-b18e-4a99-966d-c763d22081e2@nvidia.com/
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260318-gpio-shared-xlate-v2-1-0ce34c707e81@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
unlink_nv12_plane() will clobber parts of the plane state
potentially already set up by plane_atomic_check(), so we
must make sure not to call the two in the wrong order.
The problem happens when a plane previously selected as
a Y plane is now configured as a normal plane by user space.
plane_atomic_check() will first compute the proper plane
state based on the userspace request, and unlink_nv12_plane()
later clears some of the state.
This used to work on account of unlink_nv12_plane() skipping
the state clearing based on the plane visibility. But I removed
that check, thinking it was an impossible situation. Now when
that situation happens unlink_nv12_plane() will just WARN
and proceed to clobber the state.
Rather than reverting to the old way of doing things, I think
it's more clear if we unlink the NV12 planes before we even
compute the new plane state.
Cc: stable@vger.kernel.org
Reported-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://lore.kernel.org/intel-gfx/20260212004852.1920270-1-khaled.almahallawy@intel.com/
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Fixes: 6a01df2f1b2a ("drm/i915: Remove pointless visible check in unlink_nv12_plane()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260316163953.12905-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 017ecd04985573eeeb0745fa2c23896fb22ee0cc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Put the barrier() before the OP so that anything we read out in
OP and check in COND will actually be read out after the timeout
has been evaluated.
Currently the only place where we use OP is __intel_wait_for_register(),
but the use there is precisely susceptible to this reordering, assuming
the ktime_*() stuff itself doesn't act as a sufficient barrier:
__intel_wait_for_register(...)
{
...
ret = __wait_for(reg_value = intel_uncore_read_notrace(...),
(reg_value & mask) == value, ...);
...
}
Cc: stable@vger.kernel.org
Fixes: 1c3c1dc66a96 ("drm/i915: Add compiler barrier to wait_for")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260313110740.24620-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a464bace0482aa9a83e9aa7beefbaf44cd58e6cf)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When reading exactly 512 bytes with burst read enabled, the
extra_byte_added path breaks out of the inner do-while without
decrementing len. The outer while(len) then re-enters and gmbus_wait()
times out since all data has been delivered. Decrement len before the
break so the outer loop terminates correctly.
Fixes: d5dc0f43f268 ("drm/i915/gmbus: Enable burst read")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260316231920.135438-2-samasth.norway.ananda@oracle.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 4ab0f09ee73fc853d00466682635f67c531f909c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
I2C devices with associated pinctrl states (DPAUX I2C controllers)
will change pinctrl state during runtime PM. This requires taking
a mutex, so these devices cannot be marked as IRQ safe.
Add PINCTRL as dependency to avoid build errors.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/all/E1vsNBv-00000009nfA-27ZK@rmk-PC.armlinux.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix broken I2C communication on Armada 3700 with recovery
- fix device_node reference leak in probe (fsi)
- fix NULL-deref when serial string is missing (cp2615)
* tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: defer reset on Armada 3700 when recovery is used
i2c: fsi: Fix a potential leak in fsi_i2c_probe()
i2c: cp2615: fix serial string NULL-deref at probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a mailbox channel leak in the riscv-rpmi-sysmsi irqchip driver"
* tag 'irq-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-rpmi-sysmsi: Fix mailbox channel leak in rpmi_sysmsi_probe()
|
|
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80)
Fixes: e4732b590a77 ("drm/mediatek: dsi: Register DSI host after acquiring clocks and PHY")
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260225094047.76780-1-l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The DMA channel was requested in nxp_sar_adc_buffer_postenable() but
was only released in nxp_sar_adc_buffer_software_do_predisable().
This caused a DMA channel resource leak when operating in trigger mode.
Fix this by moving dma_request_chan() from
nxp_sar_adc_buffer_postenable() into
nxp_sar_adc_buffer_software_do_postenable(), ensuring the DMA channel
is only requested in software mode.
Fixes: 4434072a893e ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
