| Age | Commit message (Collapse) | Author |
|---|
|
Using class->size to detect spanning objects is not entirely correct,
because some size classes can hold a range of object sizes of up to
class->size bytes in length, due to size-classes merge. Such classes use
padding for cases when actually written objects are smaller than
class->size. zs_obj_read_begin() can incorrectly hit the slow path and
perform memcpy of such objects, basically copying padding bytes. Instead
of class->size zs_obj_read_begin() should use the actual compressed object
length (both zram and zswap know it) so that it can correctly handle
situations when a written object is small enough to fit into the first
physical page.
Link: https://lkml.kernel.org/r/20260107052145.3586917-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev> [zsmalloc & zswap]
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Note that does not mean the code is now tear-free: there're u32 counters
unprotected by u64_stats or anything else.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260123164841.2890054-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260123211101.2929547-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some PHYs stop the refclk for power saving, usually while link down.
This causes reading stats to time out.
Therefore, in emac_stats_update(), also don't update and reschedule if
!netif_carrier_ok(). But that means we could be missing later updates if
the link comes back up, so also reschedule when link up is detected in
emac_adjust_link().
While we're at it, improve the comments and error message prints around
this to reflect the better understanding of how this could happen.
Hopefully if this happens again on new hardware, these comments will
direct towards a solution.
Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/
Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC")
Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Minor simplification of the code by removing the optional size argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d560ec66-848e-4290-818a-ce28f39de493@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bits in register TxConfig used for chip identification aren't
sufficient for the number of upcoming chip versions. Therefore a register
is added with extended chip version information, for compatibility
purposes it's called TX_CONFIG_V2. First chip to use the extended chip
identification is RTL9151AS.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
[hkallweit1@gmail.com: add support for extended XID where XID is printed]
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/a3525b74-a1aa-43f6-8413-56615f6fa795@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef4a ("rocker: introduce worlds infrastructure")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
usbnet_get_link calls mii_link_ok if the device has a MII defined in
its usbnet struct and no check_connect function defined there. This is
true of these drivers, so their custom get_link functions which call
mii_link_ok are useless. Remove them in favor of usbnet_get_link.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://patch.msgid.link/20260124082217.82351-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The smsc95xx_ioctl function behaves identically to the
phy_do_ioctl_running function. Remove it and use the
phy_do_ioctl_running function directly instead.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260124080751.78488-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the OF/DT ima_get_kexec_buffer() to use a generic helper to
validate the address range. No functional change intended.
Link: https://lkml.kernel.org/r/20251231061609.907170-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Henry Willard <henry.willard@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Jonathan McDowell <noodles@fb.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Webb <paul.x.webb@oracle.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Yifei Liu <yifei.l.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Reinitialize metadata for large zone device private folios in
zone_device_page_init prior to creating a higher-order zone device private
folio. This step is necessary when the folio's order changes dynamically
between zone_device_page_init calls to avoid building a corrupt folio. As
part of the metadata reinitialization, the dev_pagemap must be passed in
from the caller because the pgmap stored in the folio page may have been
overwritten with a compound head.
Without this fix, individual pages could have invalid pgmap fields and
flags (with PG_locked being notably problematic) due to prior different
order allocations, which can, and will, result in kernel crashes.
Link: https://lkml.kernel.org/r/20260116111325.1736137-2-francois.dugast@intel.com
Fixes: d245f9b4ab80 ("mm/zone_device: support large zone device private folios")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Streamline the bcmasp_probe early exit. As support for other
functionality is added(i.e. ptp), it is easier to keep track of early
exit cleanup when it is all in one place.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194949.1145107-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Removed wol_irq check. This was needed for brcm,asp-v2.0, which was
removed in previous commits.
Removed bcmasp_intf_ops. These function pointers were added to make
it easier to implement pseudo channels. These channels were removed
in newer versions of the hardware and were never implemented.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194949.1145107-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260122185113.2760355-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.20-2026-01-23:
amdgpu:
- GC 12 fix
- UserQ fixes
- Misc error path fixes
- IP discovery fixes
- Misc cleanups
- HDMI fixes
- Documentation update
- Panel replay fixes
- Panel type handling fixes
- DCN 3.1.x fixes
- DC analog display fix
- SMU 6 fixes
- VCN 4.0.3 queue reset fix
- VCN 5.0.1 queue reset fix
- GPUVM TLB flush fix
- RAS fixes
- DC idle optimization fix
amdkfd:
- MQD fix for GC 9.4.3 and 9.5
- GC 11 cooperative launch fix
- GC 12.1 trap handler fixes
- Misc cleanups
radeon:
- Use drm_* logging helpers for VCE
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260123173537.17221-1-alexander.deucher@amd.com
|
|
On PTL, the recommendation is to disable DCC(Duty Cycle Control) as
it may cause some regressions due to added latencies. Upcoming GuC
releases will disable DCC on PTL as well, but we need to force it in
KMD so that this behavior is propagated to older kernels.
v2: Update commit message (Rodrigo)
v3: Rebase
v4: Fix typo: s/propagted/propagated
Fixes: 5cdb71d3b0db ("drm/xe/ptl: Add GuC FW definition for PTL")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260124005917.398522-1-vinay.belgaumkar@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 40ee63f5df2d5c6471b583df800aac89dc0502a4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
An LRC timestamp getting stuck is a somewhat normal occurrence. If a
single VF submits a job that does not get timesliced, the LRC timestamp
will not increment. Reduce the LRC timestamp stuck message on VFs to
notice (same log level as job timeout) to avoid false CI bugs in tests
where a VF submits a job that does not get timesliced.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7032
Fixes: bb63e7257e63 ("drm/xe: Avoid toggling schedule state to check LRC timestamp in TDR")
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260114184905.4189026-1-matthew.brost@intel.com
(cherry picked from commit e89aacd1ecdd3d13e8f347aa082687878621e03c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
There are DRM_BRIDGE_OP_HDMI_AUDIO bridges (e.g. Lontium LT9611UXC)
which don't implement DRM_BRIDGE_OP_HDMI and don't implement
hdmi_clear_audio_infoframe / hdmi_write_audio_infoframe callbacks.
Move corresponding checks under the DRM_BRIDGE_OP_HDMI condition, making
sure that we require those callbacks only from the bridges which are
actually going to use them.
Fixes: b626b1a1c9cc ("drm/bridge: refactor HDMI InfoFrame callbacks")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260126-drm-fix-lt9611uxc-v1-1-04a635a8f5cf@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Replace the now deprecated kmap_atomic() with kmap_local_page().
Optimizing nvdimm/pmem for highmem makes no sense as this is always
64bit, and the mapped regions for both btt and pmem do not require
disabling preemption and pagefaults. Specifically, kmap does not care
about the caller's atomic context (such as reads holding the btt arena
spinlock) or NVDIMM_IO_ATOMIC semantics to avoid error handling when
accessing the btt arena in general. Same for the memcpy cases. kmap
local temporary mappings will hold valid across any context switches.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Link: https://patch.msgid.link/20251128212303.2170933-1-dave@stgolabs.net
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
The logic is similar to idpf_rx_hwtstamp, but the data is exported
as a BPF kfunc instead of appended to an skb to support grabbing
timestamps in xsk packets.
A idpf_queue_has(PTP, rxq) condition is added to check the queue
supports PTP similar to idpf_rx_process_skb_fields.
Tested using an xsk connection and checking xdp timestamps are
retrievable in received packets.
Cc: intel-wired-lan@lists.osuosl.org
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Place the fields in ice_{rx,tx}_ring used in the same pieces of
hotpath code closer to each other and use
__cacheline_group_{begin,end}_aligned() to isolate the read mostly,
read-write, and cold groups into separate cachelines similarly
to idpf.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After several cleanups, the ice driver is now finally ready to convert all
Tx and Rx ring stats to the u64_stats_t and proper use of the u64 stats
APIs.
The final remaining part to cleanup is the VSI stats accumulation logic in
ice_update_vsi_ring_stats().
Refactor the function and its helpers so that all stat values (and not
just pkts and bytes) use the u64_stats APIs. The
ice_fetch_u64_(tx|rx)_stats functions read the stat values using
u64_stats_read and then copy them into local ice_vsi_(tx|rx)_stats
structures. This does require making a new struct with the stat fields as
u64.
The ice_update_vsi_(tx|rx)_ring_stats functions call the fetch functions
per ring and accumulate the result into one copy of the struct. This
accumulated total is then used to update the relevant VSI fields.
Since these are relatively small, the contents are all stored on the stack
rather than allocating and freeing memory.
Once the accumulator side is updated, the helper ice_stats_read and
ice_stats_inc and other related helper functions all easily translate to
use of u64_stats_read and u64_stats_inc. This completes the refactor and
ensures that all stats accesses now make proper use of the API.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice Tx/Rx hotpath has a few statistics counters for tracking unexpected
events. These values are stored as u64 but are not accumulated using the
u64_stats API. This could result in load/tear stores on some architectures.
Even some 64-bit architectures could have issues since the fields are not
read or written using ACCESS_ONCE or READ_ONCE.
A following change is going to refactor the stats accumulator code to use
the u64_stats API for all of these stats, and to use u64_stats_read and
u64_stats_inc properly to prevent load/store tears on all architectures.
Using u64_stats_inc and the syncp pointer is slightly verbose and would be
duplicated in a number of places in the Tx and Rx hot path. Add accessor
macros for the cases where only a single stat value is touched at once. To
keep lines short, also shorten the stats names and convert ice_txq_stats
and ice_rxq_stats to struct_group.
This will ease the transition to properly using the u64_stats API in the
following change.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The __ice_update_sample and __ice_get_ethtool_stats functions directly
accesses the pkts and bytes counters from the ring stats. A following
change is going to update the fields to be u64_stats_t type, and will need
to be accessed appropriately. This will ensure that the accesses do not
cause load/store tearing.
Add helper functions similar to the ones used for updating the stats
values, and use them. This ensures use of the syncp pointer on 32-bit
architectures. Once the fields are updated to u64_stats_t, it will then
properly avoid tears on all architectures.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_qp_reset_stats function resets the stats for all rings on a VSI. It
currently behaves differently for Tx and Rx rings. For Rx rings, it only
clears the rx_stats which do not include the pkt and byte counts. For Tx
rings and XDP rings, it clears only the pkt and byte counts.
We could add extra memset calls to cover both the stats and relevant
tx/rx stats fields. Instead, lets convert stats into a struct_group which
contains both the pkts and bytes fields as well as the Tx or Rx stats, and
remove the ice_q_stats structure entirely.
The only remaining user of ice_q_stats is the ice_q_stats_len function in
ice_ethtool.c, which just counts the number of fields. Replace this with a
simple multiplication by 2. I find this to be simpler to reason about than
relying on knowing the layout of the ice_q_stats structure.
Now that the stats field of the ice_ring_stats covers all of the statistic
values, the ice_qp_reset_stats function will properly zero out all of the
fields.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_fetch_u64_stats_per_ring function takes a pointer to the syncp from
the ring stats to synchronize reading of the packet stats. It also takes a
*copy* of the ice_q_stats fields instead of a pointer to the stats. This
completely defeats the point of using the u64_stats API. We pass the stats
by value, so they are static at the point of reading within the
u64_stats_fetch_retry loop.
Simplify the function to take a pointer to the ice_ring_stats instead of
two separate parameters. Additionally, since we never call this outside of
ice_main.c, make it a static function.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
pbus_size_mem() has two alignments, one for required resources in min_align
and another in add_align that takes account optional resources.
The add_align is applied to the bridge window through the realloc_head
list. It can happen, however, that add_align is larger than min_align but
calculated size1 and size0 are equal due to extra tailroom (e.g., hotplug
reservation, tail alignment), and therefore no entry is created to the
realloc_head list. Without the bridge appearing in the realloc head,
add_align is lost when pbus_size_mem() returns.
The problem is visible in this log for 0000:05:00.0 which lacks
add_size ... add_align ... line that would indicate it was added into
the realloc_head list:
pci 0000:05:00.0: PCI bridge to [bus 06-16]
...
pci 0000:06:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 07] requires relaxed alignment rules
pci 0000:06:06.0: bridge window [mem 0x00100000-0x001fffff] to [bus 0a] requires relaxed alignment rules
pci 0000:06:07.0: bridge window [mem 0x00100000-0x003fffff] to [bus 0b] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x00800000-0x00ffffff 64bit pref] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] requires relaxed alignment rules
pci 0000:06:08.0: bridge window [mem 0x01000000-0x057fffff] to [bus 0c-14] add_size 100000 add_align 1000000
pci 0000:06:0c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 15] requires relaxed alignment rules
pci 0000:06:0d.0: bridge window [mem 0x00100000-0x001fffff] to [bus 16] requires relaxed alignment rules
pci 0000:06:0d.0: bridge window [mem 0x00100000-0x001fffff] to [bus 16] requires relaxed alignment rules
pci 0000:05:00.0: bridge window [mem 0xd4800000-0xd97fffff]: assigned
pci 0000:05:00.0: bridge window [mem 0x1060000000-0x10607fffff 64bit pref]: assigned
pci 0000:06:08.0: bridge window [mem size 0x04900000]: can't assign; no space
pci 0000:06:08.0: bridge window [mem size 0x04900000]: failed to assign
While this bug itself seems old, it has likely become more visible after
the relaxed tail alignment that does not grossly overestimate the size
needed for the bridge window.
Make sure add_align > min_align too results in adding an entry into the
realloc head list. In addition, add handling to the cases where add_size is
zero while only alignment differs.
Fixes: d74b9027a4da ("PCI: Consider additional PF's IOV BAR alignment in sizing and assigning")
Reported-by: Malte Schröder <malte+lkml@tnxip.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Malte Schröder <malte+lkml@tnxip.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251219174036.16738-2-ilpo.jarvinen@linux.intel.com
|
|
This is now handled by the macro itself.
Acked-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260120181152.3640314-4-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
A potential circular locking dependency (ABBA deadlock) exists between
`ec_dev->lock` and the clock framework's `prepare_lock`.
The first order (A -> B) occurs when scp_ipi_send() is called while
`ec_dev->lock` is held (e.g., within cros_ec_cmd_xfer()):
1. cros_ec_cmd_xfer() acquires `ec_dev->lock` and calls scp_ipi_send().
2. scp_ipi_send() calls clk_prepare_enable(), which acquires
`prepare_lock`.
See #0 in the following example calling trace.
(Lock Order: `ec_dev->lock` -> `prepare_lock`)
The reverse order (B -> A) is more complex and has been observed
(learned) by lockdep. It involves the clock prepare operation
triggering power domain changes, which then propagates through sysfs
and power supply uevents, eventually calling back into the ChromeOS EC
driver and attempting to acquire `ec_dev->lock`:
1. Something calls clk_prepare(), which acquires `prepare_lock`. It
then triggers genpd operations like genpd_runtime_resume(), which
takes `&genpd->mlock`.
2. Power domain changes can trigger regulator changes; regulator
changes can then trigger device link changes; device link changes
can then trigger sysfs changes. Eventually, power_supply_uevent()
is called.
3. This leads to calls like cros_usbpd_charger_get_prop(), which calls
cros_ec_cmd_xfer_status(), which then attempts to acquire
`ec_dev->lock`.
See #1 ~ #6 in the following example calling trace.
(Lock Order: `prepare_lock` -> `&genpd->mlock` -> ... -> `&ec_dev->lock`)
Move the clk_prepare()/clk_unprepare() operations for `scp->clk` to the
remoteproc prepare()/unprepare() callbacks. This ensures `prepare_lock`
is only acquired in prepare()/unprepare() callbacks. Since
`ec_dev->lock` is not involved in the callbacks, the dependency loop is
broken.
This means the clock is always "prepared" when the SCP is running. The
prolonged "prepared time" for the clock should be acceptable as SCP is
designed to be a very power efficient processor. The power consumption
impact can be negligible.
A simplified calling trace reported by lockdep:
> -> #6 (&ec_dev->lock)
> cros_ec_cmd_xfer
> cros_ec_cmd_xfer_status
> cros_usbpd_charger_get_port_status
> cros_usbpd_charger_get_prop
> power_supply_get_property
> power_supply_show_property
> power_supply_uevent
> dev_uevent
> uevent_show
> dev_attr_show
> sysfs_kf_seq_show
> kernfs_seq_show
> -> #5 (kn->active#2)
> kernfs_drain
> __kernfs_remove
> kernfs_remove_by_name_ns
> sysfs_remove_file_ns
> device_del
> __device_link_del
> device_links_driver_bound
> -> #4 (device_links_lock)
> device_link_remove
> _regulator_put
> regulator_put
> -> #3 (regulator_list_mutex)
> regulator_lock_dependent
> regulator_disable
> scpsys_power_off
> _genpd_power_off
> genpd_power_off
> -> #2 (&genpd->mlock/1)
> genpd_add_subdomain
> pm_genpd_add_subdomain
> scpsys_add_subdomain
> scpsys_probe
> -> #1 (&genpd->mlock)
> genpd_runtime_resume
> __rpm_callback
> rpm_callback
> rpm_resume
> __pm_runtime_resume
> clk_core_prepare
> clk_prepare
> -> #0 (prepare_lock)
> clk_prepare
> scp_ipi_send
> scp_send_ipi
> mtk_rpmsg_send
> rpmsg_send
> cros_ec_pkt_xfer_rpmsg
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260112110755.2435899-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
MFD_AIROHA_AN8855 is referenced here but never defined, so drop it
from the Kconfig file.
Fixes: e2258cfd9b98 ("nvmem: an8855: Add support for Airoha AN8855 Switch EFUSE")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170846.733558-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170846.733558-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If nvmem_add_one_cell() failed, the ownership of "child" (or "info.np"),
thus its OF reference, is not passed further and function should clean
up by putting the reference it got via earlier of_node_get(). Note that
this is independent of references obtained via for_each_child_of_node()
loop.
Fixes: 50014d659617 ("nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170846.733558-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some INTR router instances act as simple passthroughs that preserve the
source interrupt type unchanged at the output line, rather than
converting all interrupts to a fixed type.
When interrupt sources are not homogeneous with respect to trigger type,
the driver needs to read each source's interrupt type from DT and pass
it unchanged to its interrupt parent.
Add support to check for absence of "ti,intr-trigger-type" to indicate
passthrough mode. When this property is absent, parse interrupt type
per-line from the DT fwspec provided by the interrupt source. Else, use
the global setting for all interrupt lines.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-2-b08625c487d5@ti.com
|
|
The error logging for failed transactions is misleading as it always
reports "dead process or thread" even when the target is actually
frozen. Additionally, the pid and tid are reversed which can further
confuse debugging efforts. Fix both issues.
Cc: stable@kernel.org
Cc: Steven Moreland <smoreland@google.com>
Fixes: a15dac8b2286 ("binder: additional transaction error logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260123175702.2154348-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds some alignment checks to match C Binder more closely. This
causes the driver to reject more transactions. I don't think any of the
transactions in question are harmful, but it's still a bug because it's
the wrong uapi to accept them.
The cases where usize is changed for u64, it will affect only 32-bit
kernels.
Cc: stable@vger.kernel.org
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20260123-binder-alignment-more-checks-v1-1-7e1cea77411d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Oneway transactions sent to frozen targets via binder_proc_transaction()
return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated
as successful since the target is expected to thaw at some point. It is
then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors
as the transaction could have been consumed by the now thawed target.
This is the case for binder_netlink_report() which derreferences 't'
after a pending frozen error, as pointed out by the following KASAN
report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8
Read of size 8 at addr ffff00000f98ba38 by task binder-util/522
CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_netlink_report.isra.0+0x694/0x6c8
binder_transaction+0x66e4/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Allocated by task 522:
__kmalloc_cache_noprof+0x17c/0x50c
binder_transaction+0x584/0x79b8
binder_thread_write+0xab4/0x4440
binder_ioctl+0x1fd4/0x2940
[...]
Freed by task 488:
kfree+0x1d0/0x420
binder_free_transaction+0x150/0x234
binder_thread_read+0x2d08/0x3ce4
binder_ioctl+0x488/0x2940
[...]
==================================================================
Instead, make a transaction copy so the data can be safely accessed by
binder_netlink_report() after a pending frozen error. While here, add a
comment about not using t->buffer in binder_netlink_report().
Cc: stable@vger.kernel.org
Fixes: 63740349eba7 ("binder: introduce transaction reports via netlink")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260122180203.1502637-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a bug where an empty FDA (fd array) object with 0 fds would cause an
out-of-bounds error. The previous implementation used `skip == 0` to
mean "this is a pointer fixup", but 0 is also the correct skip length
for an empty FDA. If the FDA is at the end of the buffer, then this
results in an attempt to write 8-bytes out of bounds. This is caught and
results in an EINVAL error being returned to userspace.
The pattern of using `skip == 0` as a special value originates from the
C-implementation of Binder. As part of fixing this bug, this pattern is
replaced with a Rust enum.
I considered the alternate option of not pushing a fixup when the length
is zero, but I think it's cleaner to just get rid of the zero-is-special
stuff.
The root cause of this bug was diagnosed by Gemini CLI on first try. I
used the following prompt:
> There appears to be a bug in @drivers/android/binder/thread.rs where
> the Fixups oob bug is triggered with 316 304 316 324. This implies
> that we somehow ended up with a fixup where buffer A has a pointer to
> buffer B, but the pointer is located at an index in buffer A that is
> out of bounds. Please investigate the code to find the bug. You may
> compare with @drivers/android/binder.c that implements this correctly.
Cc: stable@vger.kernel.org
Reported-by: DeepChirp <DeepChirp@outlook.com>
Closes: https://github.com/waydroid/waydroid/issues/2157
Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver")
Tested-by: DeepChirp <DeepChirp@outlook.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251229-fda-zero-v1-1-58a41cb0e7ec@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the linked list management in context.rs with KVVec.
This simplifies the ownership model by using standard
Arc-based tracking and moves away from manual unsafe list removals.
The refactor improves memory safety by leveraging Rust's contiguous
collection types while maintaining proper error propagation for
allocation failures during process registration.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/rust-for-linux/linux/issues/1215
Signed-off-by: Jason Hall <jason.kei.hall@gmail.com>
Link: https://patch.msgid.link/20260120134119.98048-1-jason.kei.hall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The lg-laptop driver uses the DMI to identify the product year.
Currently, the driver recognizes all models released after 2022
incorrectly as 2022.
Update logic to handle model identifiers for years 2022-2025.
Link: https://en.wikipedia.org/w/index.php?title=LG_Gram&oldid=1327931565#Comparison_of_Gram_models
Signed-off-by: Jonas Ringeis <private@glitchdev.me>
Link: https://patch.msgid.link/20260123225503.493467-1-private@glitchdev.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to
the AMD PMC. Add it to the quirk list to use the spurious_8042 fix.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The PSS telemetry info parsing incorrectly applies
TELEM_INFO_SRAMEVTS_MASK when extracting event register
count from firmware response. This reads bits 15-8 instead
of the correct bits 7-0, causing misdetection of hardware
capabilities.
The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for
register count. Apply the same mask to PSS parsing for
consistency.
Fixes: 9d16b482b059 ("platform:x86: Add Intel telemetry platform driver")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224061144.3925519-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The LTR blocking statistics and wakeup event counters are incorrectly
cross-referenced during debugfs output rendering. The code populates
pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup
data, but the display loops reference the wrong arrays.
This causes the "LTR Blocking Status" section to print wakeup events
and the "Wakes Status" section to print LTR blockers, misleading power
management analysis and S0ix residency debugging.
Fix by aligning array usage with the intended output section labels.
Fixes: 87bee290998d ("platform:x86: Add Intel Telemetry Debugfs interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224032053.3915900-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add PCI ID for Nova Lake, supporting PUNIT telemetry.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260122022110.3231344-1-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
toshiba_haps_add() leaks the haps object allocated by it if it returns
an error after allocating that object successfully.
toshiba_haps_remove() does not free the object pointed to by
toshiba_haps before clearing that pointer, so it becomes unreachable
allocated memory.
Address these memory leaks by using devm_kzalloc() for allocating
the memory in question.
Fixes: 23d0ba0c908a ("platform/x86: Toshiba HDD Active Protection Sensor")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group
if platform_device_register_simple() fails for the "panasonic" platform
device.
Address this by making it call sysfs_remove_group() in that case for
the group in question.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The origin bio carries blk-cgroup information which could be set from
foreground(task_css(css) - wbc->wb->blkcg_css), so the blkcg won't
control buffer io since commit ca522482e3eaf ("dm: pass NULL bdev to
bio_alloc_clone"). The synchronous io is still under control by blkcg,
because 'bio->bi_blkg' is set by io submitting task which has been added
into 'cgroup.procs'.
Fix it by using bio_clone_blkg_association when submitting a cloned bio.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220985
Fixes: ca522482e3eaf ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
|
|
When compiling the WMI string kunit tests using llvm, the compiler
will issue a warning about "oversized_test_utf8_string" being unused.
This happens because the test case that was supposed to use said
variable was accidentally omitted when adding the kunit tests.
Fix this by adding the aforementioned test case.
Fixes: 0e1a8143e797 ("platform/wmi: Add kunit test for the string conversion code")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/platform-driver-x86/20260122234521.GA413183@ax162/
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260123211537.4448-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Addresses a low power limits issue on HP ZBook Ultra G1a.
If vendor firmware capped APU power limits with 3rd-party AC adapters,
the user can disable the Smart PC function via the module parameter
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4868 [1]
Signed-off-by: Alexey Zagorodnikov <xglooom@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260121143519.12318-1-xglooom@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Drop .has_mem_copy_instr from the platform descriptors and set it
in xe_info_init() after handle_gmdid() populates graphics_verx100.
Centralizing the GRAPHICS_VER(xe) >= 20 check keeps MEM_COPY enabled
on Xe2+ and removes redundant per-platform plumbing.
Bspec: 57561
Fixes: 1e12dbae9d72 ("drm/xe/migrate: support MEM_COPY instruction")
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260120054724.1982608-2-nitin.r.gote@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 6ef02656c3222b1e12032a40d644ed56806b14fc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
