| Age | Commit message (Collapse) | Author |
|---|
|
Switch to the generic PCI power management framework and remove legacy
.resume() callback. With the generic framework, the
standard PCI related work like:
- pci_save/restore_state()
- pci_enable/disable_device()
- pci_set_power_state()
is handled by the PCI core and this driver should implement only
device specific operations in its respective callback function.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20251216181401.598273-1-vaibhavgupta40@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SHT85 is a temperature and humidity sensor with the same interface
as SHT3x.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20251211185842.66084-1-apokusinski01@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adding support for Pro WS TRX50-SAGE WIFI A, which is identical
sensors-wise to Pro WS TRX50-SAGE WIFI
Signed-off-by: Robert McIntyre <rjmcinty@hotmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-4-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG MAXIMUS X HERO. The support is incomplete because
the second EC, which provides part of the data, is inaccessible via the
kernel ec module.
Signed-off-by: Reis Holmes <reisholmes@pm.me>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove().
Fixes: 16746ce8adfe ("hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register")
Closes: https://lore.kernel.org/linux-hwmon/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The struct ublk_io is in fact accessed in __ublk_complete_rq() after the
comment. But it's not racy to access the ublk_io between clearing its
UBLK_IO_FLAG_OWNED_BY_SRV flag and completing the request, as no other
thread can use the ublk_io in the meantime.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new feature flag UBLK_F_NO_AUTO_PART_SCAN to allow users to suppress
automatic partition scanning when starting a ublk device.
This is useful for some cases in which user don't want to scan
partitions.
Users still can manually trigger partition scanning later when appropriate
using standard tools (e.g., partprobe, blockdev --rereadpt).
Reported-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB63280C5637917C071C2F0D65A9A8A@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add !list_empty(&fcmd->node) check in ublk_batch_cancel_cmd() to ensure
the fcmd hasn't already been removed from the list. Once an fcmd is
removed from the list, it's considered claimed by whoever removed it
and will be freed by that path.
Meantime switch to list_del_init() for deleting it from list.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ctrl_start_recovery() only uses its const struct ublksrv_ctrl_cmd *
header argument to log the dev_id. But this value is already available
in struct ublk_device's ub_number field. So log ub_number instead and
drop the unused header argument.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe.
Fixes: 87213b0d847c ("ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.
However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().
Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.
Then, this may result in dirty VCMDQ registers, which can fail the VM.
Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.
Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reported-by: Bao Nguyen <ncqb@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The device requires more time to process queue stop and function stop
mailbox commands compared to other mailbox commands . In the current
driver, the mailbox processing wait time for queue stop and function
stop is less than the device timeout, which may cause the driver to
incorrectly assume that the mailbox processing has failed. Therefore,
the driver wait time for queue stop and function stop should be set to
be greater than the device timeout. And PF and VF communication
relies on mailbox, the communication wait time should also be modified.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The malibox needs to be triggered by a 128bit atomic operation.
The reason is that the PF and VFs of the device share the mmio memory
of the mailbox, and the mutex cannot lock mailbox operations in
different functions, especially when passing through VFs to
virtual machines.
Currently, the write operation to the mailbox is already a 128-bit
atomic write. The read operation also needs to be modified to a
128-bit atomic read. Since there is no general 128-bit IO memory
access API in the current ARM64 architecture, and the stp and ldp
instructions do not guarantee atomic access to device memory, they
cannot be extracted as a general API. Therefore, the 128-bit atomic
read and write operations need to be implemented in the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the HiSilicon accelerator is used only on the
ARM64 architectures, the implementations for other
architectures are not needed, so remove the unnecessary code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Before sending the data via the mailbox to the hardware, to ensure
that the data accessed by the hardware is the most up-to-date,
a write barrier should be added before writing to the mailbox register.
The current memory barrier is placed after writing to the register,
the barrier order should be modified to be before writing to the register.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4be ("crypto: hisilicon/trng - add support for PRNG")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the "hisi-lz4-acomp" algorithm by the crypto acomp. When the
8th bit of the capability register is 1, the lz4 algorithm will
register to crypto acomp, and the window length is configured to
16K by default.
Since the "hisi-lz4-acomp" currently only support compression
direction, decompression is completed by the soft lz4 algorithm.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Introduce a new xflag PKEY_XFLAG_NOCLEARKEY which when given refuses
the conversion of "clear key tokens" to protected key material.
Some algorithms (PAES, PHMAC) have the need to construct "clear key
tokens" to be used during selftest. But in general these algorithms
should only support clear key material for testing purpose. So now the
algorithm implementation can signal via xflag PKEY_XFLAG_NOCLEARKEY
that a conversion of clear key material to protected key is not
acceptable and thus the pkey layer (usually one of the handler
modules) refuses clear key material with -EINVAL.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In most cases, min_t(size_t) and explicit casting are unnecessary
because the values ->hw_blocksize, ->payload_{in,out}, and ->header_in
are already of type 'size_t'. Use the simpler min() macro instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
With multiple virtio crypto devices supported with different NUMA
nodes, when crypto session is created, it will search virtio crypto
device with the same numa node of current CPU.
Here API topology_physical_package_id() is replaced with cpu_to_node()
since package id is physical concept, and one package id have multiple
memory numa id.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
virtio_crypto_skcipher_crypt_req
With function virtio_crypto_skcipher_crypt_req(), there is already
virtqueue_kick() call with spinlock held in function
__virtio_crypto_skcipher_do_req(). Remove duplicated virtqueue_kick()
function call here.
Fixes: d79b5d0bbf2e ("crypto: virtio - support crypto engine framework")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet")
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock.
Fixes: 4933b066fefb ("r8152: If inaccessible at resume time, issue a reset")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260129031106.3805887-1-senozhatsky@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For MHI WWAN device, we need a match between NMEA channel and
WWAN_PORT_NMEA type. Then the GNSS subsystem could create the
gnss device succssfully.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-9-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support NMEA port emulation for the WWAN core GNSS port testing purpose.
Emulator produces pair of GGA + RMC sentences every second what should
be enough to fool gpsd into believing it is working with a NMEA GNSS
receiver.
If the GNSS system is enabled then one NMEA port will be created
automatically for the simulated WWAN device. Manual NMEA port creation
is not supported at the moment.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-8-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just introduced WWAN NMEA port type needs a testing option. The WWAN HW
simulator was developed with the AT port type in mind and cannot be
easily extended. Refactor it now to make it capable to support more port
types.
No big functional changes, mostly renaming with a little code
rearrangement.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-7-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many WWAN modems come with embedded GNSS receiver inside and have a
dedicated port to output geopositioning data. On the one hand, the
GNSS receiver has little in common with WWAN modem and just shares a
host interface and should be exported using the GNSS subsystem. On the
other hand, GNSS receiver is not automatically activated and needs a
generic WWAN control port (AT, MBIM, etc.) to be turned on. And a user
space software needs extra information to find the control port.
Introduce the new type of WWAN port - NMEA. When driver asks to register
a NMEA port, the core allocates common parent WWAN device as usual, but
exports the NMEA port via the GNSS subsystem and acts as a proxy between
the device driver and the GNSS subsystem.
From the WWAN device driver perspective, a NMEA port is registered as a
regular WWAN port without any difference. And the driver interacts only
with the WWAN core. From the user space perspective, the NMEA port is a
GNSS device which parent can be used to enumerate and select the proper
control port for the GNSS receiver management.
CC: Slark Xiao <slark_xiao@163.com>
CC: Muhammad Nuzaihan <zaihan@unrealasia.net>
CC: Qiang Yu <quic_qianyu@quicinc.com>
CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
CC: Johan Hovold <johan@kernel.org>
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-6-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: call the port stop operation, purge queues, release the parent
WWAN device, etc. To reuse as much code as possible, split the port
unregistering function into the deregistration of a regular WWAN port
device, and the common port tearing down code.
In order to keep more code generic, break the device_unregister() call
into device_del() and put_device(), which release the port memory
uniformly.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-5-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: find or allocate the WWAN device, make it the port parent, etc. To
reuse as much code as possible, split the port creation function into
the registration of a regular WWAN port device, and basic port struct
initialization.
To be able to use put_device() uniformly, break the device_register()
call into device_initialize() and device_add() and call device
initialization earlier.
While at it, fix a minor number leak upon WWAN port registration
failure.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-4-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need information about existing WWAN device children since we remove
the device after removing the last child. Previously, we tracked users
implicitly by checking whether ops was registered and existence of a
child device of the wwan_class class. Upcoming GNSS (NMEA) port type
support breaks this approach by introducing a child device of the
gnss_class class.
And a modem driver can easily trigger a kernel Oops by removing regular
(e.g., MBIM, AT) ports first and then removing a GNSS port. The WWAN
device will be unregistered on removal of a last regular WWAN port. And
subsequent GNSS port removal will cause NULL pointer dereference in
simple_recursive_removal().
In order to support ports of classes other than wwan_class, switch to
explicit references counting. Introduce a dedicated counter to the WWAN
device struct, increment it on every wwan_create_dev() call, decrement
on wwan_remove_dev(), and actually unregister the WWAN device when there
are no more references.
Run tested with wwan_hwsim with NMEA support patches applied and
different port removing sequences.
Reported-by: Daniele Palmas <dnlplm@gmail.com>
Closes: https://lore.kernel.org/netdev/CAGRyCJE28yf-rrfkFbzu44ygLEvoUM7fecK1vnrghjG_e9UaRA@mail.gmail.com/
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-3-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was used initially for a port id allocation, then removed, and then
accidently introduced again, but it is still unused. Drop it again to
keep code clean.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-2-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add debugfs hooks to display tx/rx rings for each napi
vector.
Note that the cloning mechanism in fbnic_ethtool.c for configuration
changes protects against concurrency issues with simultaneous config
changes along with debugs ring accesses.
The configuration switch builds up the new configuration offline,
takes the current config down, which removes the debugfs nv files, and
switches to the new configuration. The new configuration is brought
up which brings the debugfs files back on top of the new configuration
rings.
The interaction with fbnic_queue_stop() and fbnic_queue_start() will
similarly delete and add the files for the indicated vector.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-3-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds reporting the Rx and Tx information
interfacing with the firmware.
The result of reading fbnic/fw_mbx is:
Rx
Rdy: 1 Head: 11 Tail: 10
Idx Len E Addr F H Raw
----------------------------------
00 4096 0 000101fea000 0 1 1000000101fea001
01 4096 0 000101feb000 0 1 1000000101feb001
.
.
.
15 4096 0 000101fe9000 0 1 1000000101fe9001
Tx
Rdy: 1 Head: 4 Tail: 4
Idx Len E Addr F H Raw
----------------------------------
00 0004 1 00010321b000 1 1 000440010321b003
01 0004 1 00010228d000 1 1 000440010228d003
.
.
.
15 0004 1 00010321b000 1 1 000440010321b003
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-2-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many USB network drivers define get_drvinfo functions which add no
value over usbnet_get_drvinfo, only setting the driver name and
version. usbnet_get_drvinfo automatically sets the driver name, and
separate driver versions are now frowned upon in the kernel. Remove all
driver versions and replace these get_drvinfo functions with references
to usbnet_get_drvinfo where possible. Where that is not possible,
remove unnecessary code to set the driver name. Also remove two
unnecessary initializations from aqc111_get_drvinfo, an inaccurate
comment in pegasus.c, and an unused macro in catc.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com> (for dm9601.c)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260129042435.13395-2-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260129-stmmac-spell-v1-1-c7df9a96e482@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue.
Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Cc: Boudewijn van der Heide <boudewijn@delta-utec.com>
Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the support to read the rx alignment errors and update
them in the standard rtnl_link_stats64 structure.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260129111520.1567097-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit fd580c9830316eda ("net: sfp: augment SFP parsing with
phy_interface_t bitmap") did not add augumentation for the interface
bitmap in the quirk for Ubiquiti U-Fiber Instant.
The subsequent commit f81fa96d8a6c7a77 ("net: phylink: use
phy_interface_t bitmaps for optical modules") then changed phylink code
for selection of SFP interface: instead of using link mode bitmap, the
interface bitmap is used, and the fastest interface mode supported by
both SFP module and MAC is chosen.
Since the interface bitmap contains also modes faster than 1000base-x,
this caused a regression wherein this module stopped working
out-of-the-box.
Fix this.
Fixes: fd580c9830316eda ("net: sfp: augment SFP parsing with phy_interface_t bitmap")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260129082227.17443-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fix from Jason Gunthorpe:
"One fix for a harmless KMSAN splat"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Initialize batch->kind in batch_clear()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"Fix a race condition introduced in v6.18.
Andreas Persson discovered this issue while working with Focusrite
Saffire Pro 40 (TCD33070). The fw_card instance maintains a linked
list of pending transactions, which must be protected against
concurrent access.
However, a commit b5725cfa4120 ("firewire: core: use spin lock
specific to timer for split transaction") unintentionally allowed
concurrent accesses to this list.
Fix this by adjusting the relevant critical sections to properly
serialize access"
* tag 'firewire-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix race condition against transaction list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder
- Fix off-by-one line number in 'rustdoc' KUnit tests
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'
- Clean objtool warning by adding one more 'noreturn' function
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'
'kernel' crate:
- Fix build error when using expressions in formatting arguments
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly
- Always inline functions using 'build_assert' with arguments
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host
'macros' crate:
- Fix 'rusttest' build error by ignoring example
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'
Plus clean a few typos in docs and comments"
* tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (28 commits)
rust: num: bounded: clean __new documentation and comments
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
drm/tyr: depend on `COMMON_CLK` to fix build error
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
kbuild: rust: clean libpin_init_internal in mrproper
rust: proc-macro2: rebuild if the version text changes
rust: num: bounded: add missing comment for always inlined function
rust: sync: refcount: always inline functions using build_assert with arguments
rust: bits: always inline functions using build_assert with arguments
scripts: generate_rust_analyzer: compile sysroot with correct edition
scripts: generate_rust_analyzer: compile quote with correct edition
scripts: generate_rust_analyzer: quote: treat `core` and `std` as dependencies
scripts: generate_rust_analyzer: syn: treat `std` as a dependency
scripts: generate_rust_analyzer: remove sysroot assertion
rust: kbuild: give `--config-path` to `rustfmt` in `.rsi` target
scripts: generate_rust_analyzer: Add pin_init_internal deps
scripts: generate_rust_analyzer: Add pin_init -> compiler_builtins dep
scripts: generate_rust_analyzer: Add compiler_builtins -> core dep
rust: macros: ignore example with module parameters
rust: num: bounded: mark __new as unsafe
...
|
|
The radeon driver restricts the MSI message address for devices older than
the BONAIR generation to 32-bit MSI addresses due to the former
restrictions of the PCI/MSI code which only allowed either 32-bit or full
64-bit address range.
This does not work on platforms which have a MSI doorbell address above the
32-bit boundary but do not support the full 64 bit address range.
The PCI/MSI core converted this binary decision to a DMA_BIT_MASK() based
decision, which allows to describe the device limitations precisely.
Convert the driver to provide the exact DMA address limitations to the
PCI/MSI core. That allows devices which do not support the full 64-bit
address space to work on platforms which have a MSI doorbell address above
the 32-bit limit as long as it is within the hardware's addressable range.
[ tglx: Massage changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-3-70da998f2750@iscas.ac.cn
|
|
Instead of a 32-bit/64-bit dichotomy, check the MSI address against
the device specific address mask.
This allows platforms with an MSI doorbell address above the 32-bit limit
to work with devices without full 64-bit MSI address support, as long as
the doorbell is within the addressable range of the device.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-2-70da998f2750@iscas.ac.cn
|
|
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such
a device is assigned an MSI address higher than what's supported.
Currently, no_64bit_msi bit is set for these devices, meaning that only
32-bit MSI addresses are allowed for them. However, on some platforms the
MSI doorbell address is above the 32-bit limit but within the addressable
range of the device.
As a first step to enable MSI on those combinations of devices and
platforms, convert the boolean no_64bit_msi flag to a DMA mask and fixup
the affected usage sites:
- no_64bit_msi = 1 -> msi_addr_mask = DMA_BIT_MASK(32)
- no_64bit_msi = 0 -> msi_addr_mask = DMA_BIT_MASK(64)
- if (no_64bit_msi) -> if (msi_addr_mask < DMA_BIT_MASK(64))
Since no values other than DMA_BIT_MASK(32) and DMA_BIT_MASK(64) are used,
this is functionally equivalent.
This prepares for changing the binary decision between 32 and 64 bit to a
DMA mask based decision which allows to support systems which have a DMA
address space less than 64bit but a MSI doorbell address above the 32-bit
limit.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com> # ionic
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-1-70da998f2750@iscas.ac.cn
|
|
This RTC has one "free" register which can be used to store arbitrary
data. Expose it as a nvmem resource in Linux.
Signed-off-by: Lorenz Brun <lorenz@monogon.tech>
Link: https://patch.msgid.link/20251223125728.346073-1-lorenz@monogon.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The Loongson-2K0300's rtc hardware design is similar to that of the
Loongson-1B, but it does not support the alarm feature.
Introduce `LOONGSON_RTC_ALARM_WORKAROUND`, which indicates a chip that
does not support the alarm feature, and rewrite the related logic in
`loongson_rtc_alarm_setting()`.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/abff68dda2fe6a6601a9e58b31e278d941297fce.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The IBI_SIR_REQ_REJECT register is a 32-bit bitmap indexed by the
dynamic address of each I3C slave. The DesignWare controller derives
the bit index by folding the 7-bit dynamic address into a 5-bit value,
using the sum of the lower 5 bits and the upper 2 bits, modulo 32.
The current implementation incorrectly uses the device table index
when updating the SIR reject mask, which can result in rejecting or
accepting IBIs for the wrong device.
Compute the SIR reject bit index directly from the dynamic address,
as defined by the controller specification, and use it consistently
when updating the reject mask.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d4ad8161e604156c60327060ad3d339ebf18fe4f.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Convert dw-i3c-master to use scoped spinlock guards in place of
open-coded spin_lock_irqsave()/spin_unlock_irqrestore() pairs to ensure
locks are always safely released on scope exit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/79020c006c15dda9d057946530f16cfb4650d450.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
