| Age | Commit message (Collapse) | Author |
|---|
|
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: fdc94d3a8c88 ("drm/amdgpu: Rework pcie_bif ras sw_init")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: b194d21b9bcc ("drm/amdgpu: Use NPS ranges from discovery table")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,
the function returns directly without releasing the allocated xcc_info,
resulting in a memory leak.
Fix this by ensuring that xcc_info is properly freed in the error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 4d5275ab0b18 ("drm/amdgpu: Add parsing of acpi xcc objects")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Report xgmi training error uncorrectable error count.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
bond_update_speed_duplex() first set speed/duplex to unknown and
then asks slave driver for current speed/duplex. Since getting
speed/duplex might take longer there is a race, where this false state
is visible by /proc/net/bonding. With commit 691b2bf14946 ("bonding:
update port speed when getting bond speed") this race gets more visible,
if user space is calling ethtool on a regular base.
Fix this by only setting speed/duplex to unknown, if link speed is
really unknown/unusable.
Fixes: 98f41f694f46 ("bonding:update speed/duplex for NETDEV_CHANGE")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260203141153.51581-1-tbogendoerfer@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec.
Fixes: 54494aa5d1e6 ("octeontx2-af: Add Marvell OcteonTX2 RVU AF driver")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203050701.2616685-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The COMMAND1 register bits [29:28] set the SPI mode, which controls
the clock idle level. When a transfer ends, tegra_spi_transfer_end()
writes def_command1_reg back to restore the default state, but this
register value currently lacks the mode bits. This results in the
clock always being configured as idle low, breaking devices that
need it high.
Fix this by storing the mode bits in def_command1_reg during setup,
to prevent this field from always being cleared.
Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260204141212.1540382-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull dcache fixes from Al Viro:
"A couple of regression fixes for the tree-in-dcache series this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs: use spinlock for FFS_DEACTIVATED/FFS_CLOSING transitions
rust_binderfs: fix a dentry leak
|
|
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee26663 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee26663 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca38 ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Parallel to binderfs patches - 02da8d2c0965 "binderfs_binder_ctl_create():
kill a bogus check" and the bit of b89aa544821d "convert binderfs" that
got lost when making 4433d8e25d73 "convert rust_binderfs"; the former is
a cleanup, the latter is about marking /binder-control persistent, so that
it would be taken out on umount.
Fixes: 4433d8e25d73 ("convert rust_binderfs")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Renesas RZ/N1 QSPI controllers embed a modified version of the Cadence
IP with the following settings:
- a limited bus clock range
- no DTR support
- no DMA
- no useful interrupt flag
- only direct accesses (no INDAC mode)
- write protection
The controller has been tested by running the SPI NOR check list with a
custom RZ/N1D400 based board mounted with a Spansion s25fl128s1 quad
SPI.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260205-schneider-6-19-rc1-qspi-v5-3-843632b3c674@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This controller can be fed by either a main "ref" clock, or three clocks
("ref" again, "ahb", "apb"). In practice, it is likely that all
controllers have the same inputs, but a single clock feeds the three
interfaces (ref is used for controlling the external interface, ahb/apb
the internal ones). Handling these clocks is in no way SoC specific,
only the number of expected clocks may change. Plus, we will soon be
adding another controller requiring an AHB and an APB clock as well, so
it is time to align the whole clock handling.
Furthermore, the use of the cqspi_jh7110_clk_init() helper, which
specifically grabs and enables the "ahb" and "apb" clocks, is a bit
convoluted:
- only the JH7110 compatible provides the ->jh7110_clk_init() callback,
- in the probe, if the above callback is set in the driver data, the
driver does not call the callback (!) but instead calls the helper
directly (?),
- in the helper, the is_jh7110 boolean is set.
This logic does not make sense. Instead:
- in the probe, set the is_jh7110 boolean based on the compatible,
- collect all available clocks with the "bulk" helper,
- enable the extra clocks if they are available,
- kill the SoC specific cqspi_jh7110_clk_init() helper.
This also allows to group the clock handling instead of depending on the
driver data pointer, which further simplifies the error path and the
remove callback.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260205-schneider-6-19-rc1-qspi-v5-2-843632b3c674@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This just add some information on kernel log about the selected ECC
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164a322 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before the referenced fixes these functions used a lookup function that
returned a pointer. This was changed to another lookup function that
returned an error code with the pointer becoming an out parameter.
The error path when the lookup failed was not changed to reflect this
change and the code continued to return the PTR_ERR of the now
uninitialized pointer. This could cause the vmw_translate_ptr functions
to return success when they actually failed causing further uninitialized
and OOB accesses.
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Fixes: a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260113175357.129285-1-ian.forbes@broadcom.com
|
|
These IDs are logged by the Hypervisor when debug logging is enabled.
Having the IDs in the log makes it much easier to see when command
buffers start and finish. They can also be used by logging/tracing
in the Guest to help correlate between Guest and Hypervisor logs.
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260109155139.3259493-1-ian.forbes@broadcom.com
|
|
The kref_put() call uses (void *)kvfree as the release callback, which
is incorrect. kref_put() expects a function with signature
void (*release)(struct kref *), but kvfree has signature
void (*)(const void *). Calling through an incompatible function pointer
is undefined behavior.
The code only worked by accident because ref_count is the first member
of vmw_bo_dirty, making the kref pointer equal to the struct pointer.
Fix this by adding a proper release callback that uses container_of()
to retrieve the containing structure before freeing.
Fixes: c1962742ffff ("drm/vmwgfx: Use kref in vmw_bo_dirty")
Signed-off-by: Brad Spengler <brad.spengler@opensrcsec.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260107171236.3573118-1-zack.rusin@broadcom.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and Netfilter.
Previous releases - regressions:
- eth: stmmac: fix stm32 (and potentially others) resume regression
- nf_tables: fix inverted genmask check in nft_map_catchall_activate()
- usb: r8152: fix resume reset deadlock
- fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for RSS contexts
Previous releases - always broken:
- sched: cls_u32: use skb_header_pointer_careful() to avoid OOB reads
with malicious u32 rules
- eth: ice: timestamping related fixes"
* tag 'net-6.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
gve: Correct ethtool rx_dropped calculation
gve: Fix stats report corruption on queue count change
selftest: net: add a test-case for encap segmentation after GRO
net: gro: fix outer network offset
net: add proper RCU protection to /proc/net/ptype
net: ethernet: adi: adin1110: Check return value of devm_gpiod_get_optional() in adin1110_check_spi()
wifi: iwlwifi: mvm: pause TCM on fast resume
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
net: spacemit: k1-emac: fix jumbo frame support
net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4
net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4
net: enetc: Remove CBDR cacheability AXI settings for ENETC v4
net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4
tipc: use kfree_sensitive() for session key material
net: stmmac: fix stm32 (and potentially others) resume regression
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts
...
|
|
When looking at the iMX93 documentation, the definitions in the driver
do not correspond with the documentation, which makes the driver
confusing.
The driver, for example, re-uses a definition for bit 0 for two
different registers, where this bit have completely different purposes.
Fix this by renaming the second register, and adding a definition that
reflects the true purpose of bit 0 in the first register (EQOS enable.)
Replace MX93_GPR_ENET_QOS_INTF_MODE_MASK with MX93_GPR_ENET_QOS_ENABLE
and MX93_GPR_ENET_QOS_INTF_SEL_MASK as MX93_GPR_ENET_QOS_INTF_MODE_MASK
is not a register field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnaGl-00000007i9f-0ZMw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rk3506, rk3528 and rk3588 have the rmii_mode bit in the clock GRF
register rather than the gmac GRF register. Provide a mask for this
field in the clock register, and convert these SoCs to use this.
Add the necessary code in rk_gmac_powerup() to write this field.
This allows us to get rid of these SoCs set_to_rmii() function. As
such, we need to mark these SoCs as supporting RMII mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYyB-00000007hpF-1dwK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use rk_encode_wm16() for RMII clock gating control, and also for the
io_clksel bit used to select the transmit clock between CRU-derived
and IO-derived clock sources.
Both of these were configured via the "set_clock_selection" method in
the SoC specific operations, but there is no requirement to change the
io_clksel except when enabling clocks.
It is also possible that we don't need to ungate the RMII clock if we
are operating in RGMII mode, but this commit makes no change there.
Split up the configuration of these as separate functions, and remove
the set_clock_selection() method. Since these clocking bits are in the
same register that we call the "speed" register, move the logic for
writing that register into rk_write_speed_grf_reg().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYy6-00000007hp9-1AJM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RK3528 gmac0 dtsi contains:
gmac0: ethernet@ffbd0000 {
phy-handle = <&rmii0_phy>;
phy-mode = "rmii";
mdio0: mdio {
rmii0_phy: ethernet-phy@2 {
phy-is-integrated;
};
};
};
This follows the same pattern as rk3328, where this gmac instance
only supports RMII. Disable RGMII in phylink's supported_interfaces
mask for this gmac instance.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/E1vnYy1-00000007hp3-0hKm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As detailed in a previous commit ("net: stmmac: rk: convert rk3328 to
use bsp_priv->id") rk3328 gmac2phy only supports RMII, whereas gmac2io
supports both RMII and RGMII. Clear supports_rgmii for gmac2phy.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328 gmac2io,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxw-00000007hox-0DqH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than providing a now-empty set_to_rmii() method to indicate
that RMII is supported, switch to setting ops->supports_rmii instead.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxq-00000007hor-3yXt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce two boolean flags into struct rk_priv_data indicating
whether RGMII and/or RMII is supported for this instance. Use these
to configure the supported_interfaces mask for phylink, validate the
interface mode. Initialise these from equivalent flags in the
rk_gmac_ops or depending on the presence of the ops->set_to_rgmii and
ops->set_to_mii methods. Finally, make ops->set_to_* optional.
This will allow us to get rid of empty set_to_rmii() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de> #px30,rk3328,rk3568,rk3588
Link: https://patch.msgid.link/E1vnYxl-00000007hol-3XiH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect NULL check in loongson_gpio_init_irqchip().
The function checks chip->parent instead of chip->irq.parents.
Fixes: 03c146cb6cd1 ("gpio: loongson-64bit: Add support for Loongson-2K0300 SoC")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260205072649.3271158-1-nichen@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
This commit effectively reverts the following two commits:
2704024d83fa ("loop: add missing bd_abort_claiming in loop_set_status")
08e136ebd193 ("loop: don't change loop device under exclusive opener in loop_set_status")
as there are reports of them causing issues with unmounting. As we're
close to the 6.19 kernel release and the original author hasn't taken a
closer look at this yet, revert them for release.
Reported-by: nokangaroo <nokangaroo@aon.at>
Link: https://lore.kernel.org/all/62de4453-17e8-47f6-a10b-39bf5a49fdee@leemhuis.info/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The PORTSC1 register has a different offset in Tegra20 compared to
Tegra30+, yet they share a crucial set of registers required for HSIC
functionality. Reflect this register offset change in the SoC config.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-5-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parallel transceiver select used in HSIC mode differs on Tegra20,
where it uses the UTMI value (0), whereas Tegra30+ uses a dedicated HSIC
value. Reflect this in the SoC config.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-4-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return exact error value from utmi_wait_register during HSIC power on.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change TEGRA_USB_HOSTPC1_DEVLC_PTS_HSIC to its literal value instead of
using the BIT macro, as it is an enumeration. Correct the spelling in the
comment and rename uhsic_registers_shift to uhsic_registers_offset.
These changes are cosmetic and do not affect code behavior.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202080526.23487-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13b1f8e25bfd1 ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25bfd1 ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 2cf2581cd229 ("usb: cdns3: add power lost support for system resume")
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260130-usb-cdns3-fix-role-switching-during-resume-v1-1-44c456852b52@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de36020 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 61de83fd8256 ("mux: mmio: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.16
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134702.1915-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial device ids for 6.20-rc1
Here are some new modem device ids for 6.20-rc1.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 RNDIS compositions
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.20 merge window
This includes following USB4/Thunderbolt changes for the v6.20 merge
window:
- Tiny documentation update
- Switch to use tb_warn() when logging path activation failures.
Both have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Log path activation failures without WARN backtraces
docs: admin-guide: thunderbolt: Replace ifconfig with ip
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next
Dinh writes:
SoCFPGA firmware update for v6.20
- Delete stray tabs in stratix10-svc
* tag 'socfpga_firmware_update_for_v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-svc: Delete some stray tabs
|
|
The function, device_change_owner() is exported for modules to use,
but there are no in-kernel users of it, so remove the export to prevent
out-of-tree code from thinking this is a safe function to call.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/2026020543-molar-childcare-af20@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce support for enabling or disabling specific NVMe quirks at module
load time through the `quirks` module parameter.
This mechanism allows users to apply known quirks dynamically based on the
device's PCI vendor and device IDs, without requiring to add hardcoded
entries in the driver and recompiling the kernel.
While the generic PCI new_id sysfs interface exists for dynamic
configuration, it is insufficient for scenarios where the system fails
to boot (for example, this has been reported to happen because of the
bogus_nid quirk). The new_id attribute is writable only after the system
has booted and sysfs is mounted.
The `quirks` parameter accepts a list of quirk specifications separated by
a '-' character in the following format:
<VID>:<DID>:<quirk_names>[-<VID>:<DID>:<quirk_names>-..]
Each quirk is represented by its name and can be prefixed with `^` to
indicate that the quirk should be disabled; quirk names are separated by
a ',' character.
Example: enable BOGUS_NID and BROKEN_MSI, disable DEALLOCATE_ZEROES:
$ modprobe nvme quirks=7170:2210:bogus_nid,broken_msi,^deallocate_zeroes
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Joonkyo Jung <joonkyoj@yonsei.ac.kr>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The initial state of dma_needs_unmap may be false, but change to true
while mapping the data iterator. Enabling swiotlb is one such case that
can change the result. The nvme driver needs to save the mapped dma
vectors to be unmapped later, so allocate as needed during iteration
rather than assume it was always allocated at the beginning. This fixes
a NULL dereference from accessing an uninitialized dma_vecs when the
device dma unmapping requirements change mid-iteration.
Fixes: b8b7570a7ec8 ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping")
Link: https://lore.kernel.org/linux-nvme/20260202125738.1194899-1-pradeep.pragallapati@oss.qualcomm.com/
Reported-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Implement SyncE support for the E825-C Ethernet controller using the
DPLL subsystem. Unlike E810, the E825-C architecture relies on platform
firmware (ACPI) to describe connections between the NIC's recovered clock
outputs and external DPLL inputs.
Implement the following mechanisms to support this architecture:
1. Discovery Mechanism: The driver parses the 'dpll-pins' and 'dpll-pin names'
firmware properties to identify the external DPLL pins (parents)
corresponding to its RCLK outputs ("rclk0", "rclk1"). It uses
fwnode_dpll_pin_find() to locate these parent pins in the DPLL core.
2. Asynchronous Registration: Since the platform DPLL driver (e.g.
zl3073x) may probe independently of the network driver, utilize
the DPLL notifier chain The driver listens for DPLL_PIN_CREATED
events to detect when the parent MUX pins become available, then
registers its own Recovered Clock (RCLK) pins as children of those
parents.
3. Hardware Configuration: Implement the specific register access logic
for E825-C CGU (Clock Generation Unit) registers (R10, R11). This
includes configuring the bypass MUXes and clock dividers required to
drive SyncE signals.
4. Split Initialization: Refactor `ice_dpll_init()` to separate the
static initialization path of E810 from the dynamic, firmware-driven
path required for E825-C.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-10-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update existing DPLL drivers to utilize the DPLL reference count
tracking infrastructure.
Add dpll_tracker fields to the drivers' internal device and pin
structures. Pass pointers to these trackers when calling
dpll_device_get/put() and dpll_pin_get/put().
This allows developers to inspect the specific references held by this
driver via debugfs when CONFIG_DPLL_REFCNT_TRACKER is enabled, aiding
in the debugging of resource leaks.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-9-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support for the REF_TRACKER infrastructure to the DPLL subsystem.
When enabled, this allows developers to track and debug reference counting
leaks or imbalances for dpll_device and dpll_pin objects. It records stack
traces for every get/put operation and exposes this information via
debugfs at:
/sys/kernel/debug/ref_tracker/dpll_device_*
/sys/kernel/debug/ref_tracker/dpll_pin_*
The following API changes are made to support this:
1. dpll_device_get() / dpll_device_put() now accept a 'dpll_tracker *'
(which is a typedef to 'struct ref_tracker *' when enabled, or an empty
struct otherwise).
2. dpll_pin_get() / dpll_pin_put() and fwnode_dpll_pin_find() similarly
accept the tracker argument.
3. Internal registration structures now hold a tracker to associate the
reference held by the registration with the specific owner.
All existing in-tree drivers (ice, mlx5, ptp_ocp, zl3073x) are updated
to pass NULL for the new tracker argument, maintaining current behavior
while enabling future debugging capabilities.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-8-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the reference counting mechanism for DPLL devices and pins to
improve consistency and prevent potential lifetime issues.
Introduce internal helpers __dpll_{device,pin}_{hold,put}() to
centralize reference management.
Update the internal XArray reference helpers (dpll_xa_ref_*) to
automatically grab a reference to the target object when it is added to
a list, and release it when removed. This ensures that objects linked
internally (e.g., pins referenced by parent pins) are properly kept
alive without relying on the caller to manually manage the count.
Consequently, remove the now redundant manual `refcount_inc/dec` calls
in dpll_pin_on_pin_{,un}register()`, as ownership is now correctly handled
by the dpll_xa_ref_* functions.
Additionally, ensure that dpll_device_{,un}register()` takes/releases
a reference to the device, ensuring the device object remains valid for
the duration of its registration.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-7-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add parsing for the "mux" string in the 'connection-type' pin property
mapping it to DPLL_PIN_TYPE_MUX.
Recognizing this type in the driver allows these pins to be taken as
parent pins for pin-on-pin pins coming from different modules (e.g.
network drivers).
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the DPLL subsystem reports events (creation, deletion, changes)
to userspace via Netlink. However, there is no mechanism for other kernel
components to be notified of these events directly.
Add a raw notifier chain to the DPLL core protected by dpll_lock. This
allows other kernel subsystems or drivers to register callbacks and
receive notifications when DPLL devices or pins are created, deleted,
or modified.
Define the following:
- Registration helpers: {,un}register_dpll_notifier()
- Event types: DPLL_DEVICE_CREATED, DPLL_PIN_CREATED, etc.
- Context structures: dpll_{device,pin}_notifier_info to pass relevant
data to the listeners.
The notification chain is invoked alongside the existing Netlink event
generation to ensure in-kernel listeners are kept in sync with the
subsystem state.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
