| Age | Commit message (Collapse) | Author |
|---|
|
The lis3lv02d started triggering a WARN in the IRQ code because it
passes IRQF_ONESHOT to request_threaded_irq() even when thread_fn is
NULL, which is an invalid combination.
So set the flag only if thread_fn is non-NULL.
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260326180436.14968-2-ardb@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
stmmac_vlan_restore() unconditionally calls stmmac_vlan_update() when
NETIF_F_VLAN_FEATURES is set. On platforms where priv->hw->vlan (or
->update_vlan_hash) is not provided, stmmac_update_vlan_hash() returns
-EINVAL via stmmac_do_void_callback(), resulting in a spurious
"Failed to restore VLANs" error even when no VLAN filtering is in use.
Remove not needed comment.
Remove not used return value from stmmac_vlan_restore().
Tested on Orange Pi Zero 3.
Fixes: bd7ad51253a7 ("net: stmmac: Fix VLAN HW state restore")
Signed-off-by: Michal Piekos <michal.piekos@mmpsystems.pl>
Link: https://patch.msgid.link/20260328-vlan-restore-error-v4-1-f88624c530dc@mmpsystems.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style.
Fixes: d72e01a0430f ("ftgmac100: Use a scratch buffer for failed RX allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Yufan Chen <yufan.chen@linux.dev>
Link: https://patch.msgid.link/20260328163257.60836-1-yufan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add TDP data for laptop model GU605MU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model FA607NU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GV302XU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
Fixes: 25f9b0d35155 ("misc/mei: Allow building Intel ME interface on non-x86")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/8e2646fb71b148b3d38beb13f19b14e3634a1e1a.1769541024.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When declaring an immutable global variable in Rust, the compiler checks
that it looks thread safe, because it is generally safe to access said
global variable. When using C bindings types for these globals, we don't
really want this check, because it is conservative and assumes pointers
are not thread safe.
In the case of BINDER_VM_OPS, this is a challenge when combined with the
patch 'userfaultfd: introduce vm_uffd_ops' [1], which introduces a
pointer field to vm_operations_struct. It previously only held function
pointers, which are considered thread safe.
Rust Binder should not be assuming that vm_operations_struct contains no
pointer fields, so to fix this, use AssertSync (which Rust Binder has
already declared for another similar global of type struct
file_operations with the same problem). This ensures that even if
another commit adds a pointer field to vm_operations_struct, this does
not cause problems.
Fixes: 8ef2c15aeae0 ("rust_binder: check ownership before using vma")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603121235.tpnRxFKO-lkp@intel.com/
Link: https://lore.kernel.org/r/20260306171815.3160826-8-rppt@kernel.org [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260314111951.4139029-1-aliceryhl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively.
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously")
Reported-by: syzbot+3b3852c6031d0f30dfaf@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=3b3852c6031d0f30dfaf
Reported-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Closes: https://lore.kernel.org/linux-pm/20260324-thermal-core-uaf-init_delayed_work-v1-1-6611ae76a8a1@igalia.com/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Tested-by: Mauricio Faria de Oliveira <mfo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/6267615.lOV4Wx5bFT@rafael.j.wysocki
|
|
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller.
Fixes: dcfdd698dc52 ("mmc: vub300: Use devm_mmc_alloc_host() helper")
Cc: stable@vger.kernel.org # 6.17+
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Fix incorrect error checking and memory type confusion in
efidrm_device_create(). devm_memremap() returns error pointers, not
NULL, and returns system memory while devm_ioremap() returns I/O memory.
The code incorrectly passes system memory to iosys_map_set_vaddr_iomem().
Restructure to handle each memory type separately. Use devm_ioremap*()
with ERR_PTR(-ENXIO) for WC/UC, and devm_memremap() with ERR_CAST() for
WT/WB.
Fixes: 32ae90c66fb6 ("drm/sysfb: Add efidrm for EFI displays")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260311064652.2903449-1-nichen@iscas.ac.cn
|
|
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator.
Fixes: c900e49d58eb ("net: xilinx: axienet: Implement BQL")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-3-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.
In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20260327073238.134948-2-suraj.gupta2@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN.
Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260326142033.82297-1-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 4e5bd03ae346 ("net: bonding: fix bond_xmit_broadcast return value error bug")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260326075553.3960562-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On ACPI systems, the aplic's pm_domain is set to acpi_general_pm_domain,
which provides its own power management callbacks (e.g., runtime_suspend
via acpi_subsys_runtime_suspend).
aplic_pm_add() unconditionally calls dev_pm_genpd_add_notifier() when
dev->pm_domain is non‑NULL, leading to a comparison between runtime_suspend
and genpd_runtime_suspend. This results in the following errors when ACPI
is enabled:
riscv-aplic RSCV0002:00: failed to create APLIC context
riscv-aplic RSCV0002:00: error -ENODEV: failed to setup APLIC in MSI mode
Fix this by checking for dev->of_node before adding or removing the genpd
notifier, ensuring it is only used for device tree based systems.
Fixes: 95a8ddde3660 ("irqchip/riscv-aplic: Preserve APLIC states across suspend/resume")
Signed-off-by: Jessica Liu <liu.xuemei1@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260331093029749vRpdH-0qoEqjS0Wnn9M4x@zte.com.cn
|
|
Looks like I missed the drm_dp_enhanced_frame_cap() in the ivb/hsw CPU
eDP code when I introduced crtc_state->enhanced_framing. Fix it up so
that the state we program to the hardware is guaranteed to match what
we computed earlier.
Cc: stable@vger.kernel.org
Fixes: 3072a24c778a ("drm/i915: Introduce crtc_state->enhanced_framing")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260325135849.12603-3-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
(cherry picked from commit 799fe8dc2af52f35c78c4ac97f8e34994dfd8760)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Apparently I forgot about the pipe min_voltage_level when I
decoupled the CDCLK calculations from modesets. Even if the
CDCLK frequency doesn't need changing we may still need to
bump the voltage level to accommodate an increase in the
port clock frequency.
Currently, even if there is a full modeset, we won't notice the
need to go through the full CDCLK calculations/programming,
unless the set of enabled/active pipes changes, or the
pipe/dbuf min CDCLK changes.
Duplicate the same logic we use the pipe's min CDCLK frequency
to also deal with its min voltage level.
Note that the 'allow_voltage_level_decrease' stuff isn't
really useful here since the min voltage level can only
change during a full modeset. But I think sticking to the
same approach in the three similar parts (pipe min cdclk,
pipe min voltage level, dbuf min cdclk) is a good idea.
Cc: stable@vger.kernel.org
Tested-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15826
Fixes: ba91b9eecb47 ("drm/i915/cdclk: Decouple cdclk from state->modeset")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260325135849.12603-2-ville.syrjala@linux.intel.com
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
(cherry picked from commit 0f21a14987ebae3c05ad1184ea872e7b7a7b8695)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the
firmware response in ctxm->type and later uses that value to index
fixed backing-store metadata arrays such as ctx_arr[] and
bnxt_bstore_to_trace[].
ctxm->type is fixed by the current backing-store query type and matches
the array index of ctx->ctx_arr. Set ctxm->type from the current loop
variable instead of depending on resp->type.
Also update the loop to advance type from next_valid_type in the for
statement, which keeps the control flow simpler for non-valid and
unchanged entries.
Fixes: 6a4d0774f02d ("bnxt_en: Add support for new backing store query firmware API")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260328234357.43669-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netfilter flowtable can theoretically try to offload flower rules as soon
as a net_device is registered while all the other ones are not
registered or initialized, triggering a possible NULL pointer dereferencing
of qdma pointer in airoha_ppe_set_cpu_port routine. Moreover, if
register_netdev() fails for a particular net_device, there is a small
race if Netfilter tries to offload flowtable rules before all the
net_devices are properly unregistered in airoha_probe() error patch,
triggering a NULL pointer dereferencing in airoha_ppe_set_cpu_port
routine. In order to avoid any possible race, delay offloading until
all net_devices are registered in the networking subsystem.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260329-airoha-regiser-race-fix-v2-1-f4ebb139277b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to properly cleanup hw rx QDMA queues and bring the device to
the initial state, reset rx DMA queue head/tail index. Moreover, reset
queued DMA descriptor fields.
Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Tested-by: Madhur Agrawal <Madhur.Agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260327-airoha_qdma_cleanup_rx_queue-fix-v1-1-369d6ab1511a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
cqspi_exec_mem_op() increments the runtime PM usage counter before all
refcount checks are performed. If one of these checks fails, the function
returns without dropping the PM reference.
Move the pm_runtime_resume_and_get() call after the refcount checks so
that runtime PM is only acquired when the operation can proceed and
drop the inflight_ops refcount if the PM resume fails.
Cc: stable@vger.kernel.org
Fixes: 7446284023e8 ("spi: cadence-quadspi: Implement refcount to handle unbind during busy")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Link: https://patch.msgid.link/20260313135236.46642-1-ghidoliemanuele@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
size to GPU page size
The control stack size is calculated based on the number of CUs and
waves, and is then aligned to PAGE_SIZE. When the resulting control
stack size is aligned to 64 KB, GPU hangs and queue preemption
failures are observed while running RCCL unit tests on systems with
more than two GPUs.
amdgpu 0048:0f:00.0: amdgpu: Queue preemption failed for queue with
doorbell_id: 80030008
amdgpu 0048:0f:00.0: amdgpu: Failed to evict process queues
amdgpu 0048:0f:00.0: amdgpu: GPU reset begin!. Source: 4
amdgpu 0048:0f:00.0: amdgpu: Queue preemption failed for queue with
doorbell_id: 80030008
amdgpu 0048:0f:00.0: amdgpu: Failed to evict process queues
amdgpu 0048:0f:00.0: amdgpu: Failed to restore process queues
This issue is observed on both 4 KB and 64 KB system page-size
configurations.
This patch fixes the issue by aligning the control stack size to
AMDGPU_GPU_PAGE_SIZE instead of PAGE_SIZE, so the control stack size
will not be 64 KB on systems with a 64 KB page size and queue
preemption works correctly.
Additionally, In the current code, wg_data_size is aligned to PAGE_SIZE,
which can waste memory if the system page size is large. In this patch,
wg_data_size is aligned to AMDGPU_GPU_PAGE_SIZE. The cwsr_size, calculated
from wg_data_size and the control stack size, is aligned to PAGE_SIZE.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3e14436304392fbada359edd0f1d1659850c9b7)
|
|
In occ_show_extended() case 0, when the EXTN_FLAG_SENSOR_ID flag
is set, the sysfs_emit format string "%u" is missing the trailing
newline that the sysfs ABI expects. The else branch correctly uses
"%4phN\n", and all other show functions in this file include the
trailing newline.
Add the missing "\n" for consistency and correct sysfs output.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260326224510.294619-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
For a mode-1 reset done at the end of S4 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6ee ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4853
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2fb4883b884a437d760bd7bdf7695a7e5a60bba3)
Cc: stable@vger.kernel.org
|
|
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing the existing occ_get_powr_avg() helper, which
already handles the zero-sample case and uses mul_u64_u32_div()
to multiply before dividing for better precision. Move the helper
above occ_show_power_1() so it is visible at the call site.
Fixes: c10e753d43eb ("hwmon (occ): Add sensor types and versions")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260326224510.294619-2-sanman.pradhan@hpe.com
[groeck: Fix alignment problems reported by checkpatch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
dcn401_init_hw() assumes that update_bw_bounding_box() is valid when
entering the update path. However, the existing condition:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
Fixes: ca0fb243c3bb ("drm/amd/display: Underflow Seen on DCN401 eGPU")
Cc: Daniel Sa <Daniel.Sa@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477)
Cc: stable@vger.kernel.org
|
|
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
Fixes: 34a1de0f7935 ("drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole")
Reviewed-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb)
Cc: stable@vger.kernel.org
|
|
In mes_userq_mqd_create(), the memdup_user() allocations for
IP-specific MQD structs are not freed when subsequent VA validation
fails. The goto free_mqd label only cleans up the MQD BO object and
userq_props.
Fix by adding kfree() before each goto free_mqd on VA validation
failure in the COMPUTE, GFX, and SDMA branches.
Fixes: 9e46b8bb0539 ("drm/amdgpu: validate userq buffer virtual address and size")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 27f5ff9e4a4150d7cf8b4085aedd3b77ddcc5d08)
Cc: stable@vger.kernel.org
|
|
For gfxV9, due to a hardware bug ("based on the comments in the code
here [1]"), the control stack of a user-mode compute queue must be
allocated immediately after the page boundary of its regular MQD buffer.
To handle this, we allocate an enlarged MQD buffer where the first page
is used as the MQD and the remaining pages store the control stack.
Although these regions share the same BO, they require different memory
types: the MQD must be UC (uncached), while the control stack must be
NC (non-coherent), matching the behavior when the control stack is
allocated in user space.
This logic works correctly on systems where the CPU page size matches
the GPU page size (4K). However, the current implementation aligns both
the MQD and the control stack to the CPU PAGE_SIZE. On systems with a
larger CPU page size, the entire first CPU page is marked UC—even though
that page may contain multiple GPU pages. The GPU treats the second 4K
GPU page inside that CPU page as part of the control stack, but it is
incorrectly mapped as UC.
This patch fixes the issue by aligning both the MQD and control stack
sizes to the GPU page size (4K). The first 4K page is correctly marked
as UC for the MQD, and the remaining GPU pages are marked NC for the
control stack. This ensures proper memory type assignment on systems
with larger CPU page sizes.
[1]: https://elixir.bootlin.com/linux/v6.18/source/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c#L118
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 998d6781410de1c4b787fdbf6c56e851ea7fa553)
|
|
The AQL queue size can be 4K, but the minimum buffer object (BO)
allocation size is PAGE_SIZE. On systems with a page size larger
than 4K, the expected queue size does not match the allocated BO
size, causing queue creation to fail.
Align the expected queue size to PAGE_SIZE so that it matches the
allocated BO size and allows queue creation to succeed.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b01cd158a2f5230b137396c5f8cda3fc780abbc2)
|
|
Fix the IDR allocation flags by using atomic GFP
flags in non‑sleepable contexts to avoid the __might_sleep()
complaint.
268.290239] [drm] Initialized amdgpu 3.64.0 for 0000:03:00.0 on minor 0
[ 268.294900] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:323
[ 268.295355] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1744, name: modprobe
[ 268.295705] preempt_count: 1, expected: 0
[ 268.295886] RCU nest depth: 0, expected: 0
[ 268.296072] 2 locks held by modprobe/1744:
[ 268.296077] #0: ffff8c3a44abd1b8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xe4/0x210
[ 268.296100] #1: ffffffffc1a6ea78 (amdgpu_pasid_idr_lock){+.+.}-{3:3}, at: amdgpu_pasid_alloc+0x26/0xe0 [amdgpu]
[ 268.296494] CPU: 12 UID: 0 PID: 1744 Comm: modprobe Tainted: G U OE 6.19.0-custom #16 PREEMPT(voluntary)
[ 268.296498] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 268.296499] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS RMJ1009A 06/13/2021
[ 268.296501] Call Trace:
Fixes: 8f1de51f49be ("drm/amdgpu: prevent immediate PASID reuse case")
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ea56aa2625708eaf96f310032391ff37746310ef)
Cc: stable@vger.kernel.org
|
|
amdgpu_userq_get_doorbell_index() passes the user-provided
doorbell_offset to amdgpu_doorbell_index_on_bar() without bounds
checking. An arbitrarily large doorbell_offset can cause the
calculated doorbell index to fall outside the allocated doorbell BO,
potentially corrupting kernel doorbell space.
Validate that doorbell_offset falls within the doorbell BO before
computing the BAR index, using u64 arithmetic to prevent overflow.
Fixes: f09c1e6077ab ("drm/amdgpu: generate doorbell index for userqueue")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit de1ef4ffd70e1d15f0bf584fd22b1f28cbd5e2ec)
Cc: stable@vger.kernel.org
|
|
It just leads to user confusion.
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e471627d56272a791972f25e467348b611c31713)
Cc: stable@vger.kernel.org
|
|
callback
aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal.
Fixes: 4670db6f32e9 ("spi: amlogic: add driver for Amlogic SPI Flash Controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260322-spifc-a4-v1-1-2dc5ebcbe0a9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
tps53676_identify() uses strncmp() to compare the device ID buffer
against a byte sequence containing embedded non-printable bytes
(\x53\x67\x60). strncmp() is semantically wrong for binary data
comparison; use memcmp() instead.
Additionally, the buffer from i2c_smbus_read_block_data() is not
NUL-terminated, so printing it with "%s" in the error path is
undefined behavior and may read past the buffer. Use "%*ph" to
hex-dump the actual bytes returned.
Per the datasheet, the expected device ID is the 6-byte sequence
54 49 53 67 60 00 ("TI\x53\x67\x60\x00"), so compare all 6 bytes
including the trailing NUL.
Fixes: cb3d37b59012 ("hwmon: (pmbus/tps53679) Add support for TI TPS53676")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260330155618.77403-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Instead of discarding the saved unicode buffer when the console was
resized while in the alternate screen, resize it to the current
dimensions using vc_uniscr_copy_area() to preserve its content. This
properly restores the unicode screen on alt screen exit rather than
lazily rebuilding it from a lossy reverse glyph translation.
On allocation failure the stale buffer is freed and vc_uni_lines is
set to NULL so it gets lazily rebuilt via vc_uniscr_check() when next
needed.
Fixes: 40014493cece ("vt: discard stale unicode buffer on alt screen exit after resize")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://patch.msgid.link/3nsr334n-079q-125n-7807-n4nq818758ns@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and
sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize()
skips reallocating the unicode buffer because vc_uni_lines is NULL.
However, vc_saved_uni_lines still points to the old buffer allocated for
the original dimensions.
When leave_alt_screen() later restores vc_saved_uni_lines, the buffer
dimensions no longer match vc_rows/vc_cols. Any operation that iterates
over the unicode buffer using the current dimensions (e.g. csi_J clearing
the screen) will access memory out of bounds, causing a kernel oops:
BUG: unable to handle page fault for address: 0x0000002000000020
RIP: 0010:csi_J+0x133/0x2d0
The faulting address 0x0000002000000020 is two adjacent u32 space
characters (0x20) interpreted as a pointer, read from the row data area
past the end of the 25-entry pointer array in a buffer allocated for
80x25 but accessed with 240x67 dimensions.
Fix this by checking whether the console dimensions changed while in the
alternate screen. If they did, free the stale saved buffer instead of
restoring it. The unicode screen will be lazily rebuilt via
vc_uniscr_check() when next needed.
Fixes: 5eb608319bb5 ("vt: save/restore unicode screen buffer for alternate screen")
Cc: stable <stable@kernel.org>
Tested-by: Liav Mordouch <liavmordouch@gmail.com>
Signed-off-by: Liav Mordouch <liavmordouch@gmail.com>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://patch.msgid.link/20260327170204.29706-1-liavmordouch@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the borrowed_net flag is used to indicate whether the network device is
shared and pre-registered during the legacy driver's bind phase.
Fixes: f466c6353819 ("usb: gadget: f_rndis: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-7-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: 8cedba7c73af ("usb: gadget: f_subset: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-6-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: b29002a15794 ("usb: gadget: f_eem: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-5-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: fee562a6450b ("usb: gadget: f_ecm: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-4-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide kernel-doc descriptions for the fields in struct f_ncm_opts to
improve code readability and maintainability.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-3-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection.
Fixes: 73517cf49bd4 ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-2-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
Fixes: 02832e56f88a ("usb: gadget: f_subset: add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-1-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the current implementation, if a cable's alternate mode enter operation
is not supported, the tbt->plug[TYPEC_PLUG_SOP_P] pointer is cleared by the
time tbt_enter_mode() is called. This prevents the driver from identifying
the cable's VDO.
As a result, the Thunderbolt connection falls back to the default
TBT_CABLE_USB3_PASSIVE speed, even if the cable supports higher speeds.
To ensure the correct VDO value is used during mode entry, calculate and
store the enter_vdo earlier during the initialization phase in tbt_ready().
Cc: stable <stable@kernel.org>
Fixes: 100e25738659 ("usb: typec: Add driver for Thunderbolt 3 Alternate Mode")
Tested-by: Madhu M <madhu.m@intel.corp-partner.google.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260324103012.1417616-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The typec plug alternate mode is already registered as part of the bus.
When both class and bus are set for a device, device_add() attempts to
create the "subsystem" symlink in the device's sysfs directory twice, once
for the bus and once for the class.
This results in a duplicate filename error during registration,
causing the alternate mode registration to fail with warnings:
cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/
PNP0C09:00/GOOG0004:00/cros-ec-dev.1.auto/cros_ec_ucsi.3.auto/typec/
port1/port1-cable/port1-plug0/port1-plug0.0/subsystem'
typec port0-plug0: failed to register alternate mode (-17)
cros_ec_ucsi.3.auto: failed to registers svid 0x8087 mode 1
Cc: stable <stable@kernel.org>
Fixes: 67ab45426215 ("usb: typec: Set the bus also for the port and plug altmodes")
Tested-by: Madhu M <madhu.m@intel.corp-partner.google.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260324102903.1416210-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.
However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
- spin_unlock on a lock that is not held (undefined behavior)
- The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
causing a deadlock when spin_lock_irqsave() is called later in the
same function.
Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro.
Fixes: af076a41f8a2 ("usb: dwc2: also exit clock_gating when stopping udc while suspended")
Cc: stable <stable@kernel.org>
Signed-off-by: Juno Choi <juno.choi@lge.com>
Link: https://patch.msgid.link/20260324014910.2798425-1-juno.choi@lge.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
