| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Regular weekly pull request, from sunny San Diego. Usual suspects in
xe/i915/amdgpu with small fixes all over, then some minor fixes across
a few other drivers. It's probably a bit on the heavy side, but most
of the fix seem well contained,
core:
- drm_dev_unplug UAF fix
pagemap:
- lock handling fix
xe:
- A number of teardown fixes
- Skip over non-leaf PTE for PRL generation
- Fix an uninitialized variable
- Fix a missing runtime PM reference
i915/display:
- Fix #15771: Screen corruption and stuttering on P14s w/ 3K display
- Fix for PSR entry setup frames count on rejected commit
- Fix OOPS if firmware is not loaded and suspend is attempted
- Fix unlikely NULL deref due to DC6 on probe
amdgpu:
- Fix gamma 2.2 colorop TFs
- BO list fix
- LTO fix
- DC FP fix
- DisplayID handling fix
- DCN 2.01 fix
- MMHUB boundary fixes
- ISP fix
- TLB fence fix
- Hainan pm fix
radeon:
- Hainan pm fix
vmwgfx:
- memory leak fix
- doc warning fix
imagination:
- deadlock fix
- interrupt handling fixes
dw-hdmi-qp:
- multi channel audio fix"
* tag 'drm-fixes-2026-03-21' of https://gitlab.freedesktop.org/drm/kernel: (40 commits)
drm/xe: Fix missing runtime PM reference in ccs_mode_store
drm/xe: Open-code GGTT MMIO access protection
drm/xe/lrc: Fix uninitialized new_ts when capturing context timestamp
drm/xe/oa: Allow reading after disabling OA stream
drm/xe: Skip over non leaf pte for PRL generation
drm/xe/guc: Ensure CT state transitions via STOP before DISABLED
drm/xe: Trigger queue cleanup if not in wedged mode 2
drm/xe: Forcefully tear down exec queues in GuC submit fini
drm/xe: Always kill exec queues in xe_guc_submit_pause_abort
drm/xe/guc: Fail immediately on GuC load error
drm/i915/gt: Check set_default_submission() before deferencing
drm/radeon: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: rework how we handle TLB fences
drm/bridge: dw-hdmi-qp: fix multi-channel audio output
drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug
drm/amdgpu: Fix ISP segfault issue in kernel v7.0
drm/amdgpu/gmc9.0: add bounds checking for cid
drm/amdgpu/mmhub4.2.0: add bounds checking for cid
drm/amdgpu/mmhub4.1.0: add bounds checking for cid
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/vt and serial driver fixes for 7.0-rc5.
Included in here are:
- 8250 driver fixes for reported problems
- serial core lockup fix
- uartlite driver bugfix
- vt save/restore bugfix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: save/restore unicode screen buffer for alternate screen
serial: 8250_dw: Ensure BUSY is deasserted
serial: 8250: Add late synchronize_irq() to shutdown to handle DW UART BUSY
serial: 8250_dw: Rework IIR_NO_INT handling to stop interrupt storm
serial: 8250_dw: Rework dw8250_handle_irq() locking and IIR handling
serial: 8250: Add serial8250_handle_irq_locked()
serial: 8250_dw: Avoid unnecessary LCR writes
serial: 8250: Protect LCR write in shutdown
serial: 8250_pci: add support for the AX99100
serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN
serial: uartlite: fix PM runtime usage count underflow on probe
serial: 8250: always disable IRQ during THRE test
serial: 8250: Fix TX deadlock when using DMA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's a couple of core fixes here from Johan, fixing a race
condition and an error handling path, plus a bunch of driver specific
fixups.
The Qualcomm issues could be nasty if you ran into them, especially
the DMA ordering one"
* tag 'spi-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: geni-qcom: Check DMA interrupts early in ISR
spi: fix statistics allocation
spi: fix use-after-free on controller registration failure
spi: geni-qcom: Fix CPHA and CPOL mode change detection
spi: axiado: Fix double-free in ax_spi_probe()
spi: amlogic-spisg: Fix memory leak in aml_spisg_probe()
spi: amlogic: spifc-a4: Remove redundant clock cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- bcm: increase ASB control timeout for bcm2835
- mediatek: fix power domain count
* tag 'pmdomain-v7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: bcm: bcm2835-power: Increase ASB control timeout
pmdomain: mediatek: Fix power domain count
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci: Fix timing selection for 1-bit bus width
- sdhci-pci-gli: Fix DMA write corruption for GL9750
* tag 'mmc-v7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: fix timing selection for 1-bit bus width
mmc: sdhci-pci-gli: fix GL9750 DMA write corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- ADATA SU680 SSDs are causing command timeouts when LPM is enabled.
Enable the ATA_QUIRK_NOLPM quirk to prevent LPM from being enabled
on these devices (Damien)
- When receiving a REPORT SUPPORTED OPERATION CODES command with an
invalid REPORTING OPTIONS format, sense data should have the field
pointer set to byte 2 (the location of the REPORTING OPTIONS field)
instead of incorrectly pointing to byte 1 (Damien)
* tag 'ata-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: report correct sense field pointer in ata_scsiop_maint_in()
ata: libata-core: disable LPM on ADATA SU680 SSD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
- In SPI NOR, there was an issue with the RDCR capability, leading to
several platforms no longer capable of using it for wrong reasons
(the follow-up commit renames the helper to avoid future confusion)
- NAND controller drivers needed to be improved to fix some timings, a
locking schenario and avoid certain operations during panic writes
- The Spear600 DT binding conversion was done partially, leading to
several warnings which have individually been fixed
- Tudor gets replaced by Takahiro for the SPI NOR maintainance
- Plus two more misc fixes
* tag 'mtd/fixes-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: pl353: make sure optimal timings are applied
mtd: spi-nor: Rename spi_nor_spimem_check_op()
mtd: spi-nor: Fix RDCR controller capability core check
mtd: rawnand: brcmnand: skip DMA during panic write
mtd: rawnand: serialize lock/unlock against other NAND operations
dt-bindings: mtd: st,spear600-smi: Fix example
dt-bindings: mtd: st,spear600-smi: #address/size-cells is mandatory
dt-bindings: mtd: st,spear600-smi: Fix description
mtd: rawnand: cadence: Fix error check for dma_alloc_coherent() in cadence_nand_init()
mtd: Avoid boot crash in RedBoot partition table parser
MAINTAINERS: add Takahiro Kuwano as SPI NOR reviewer
MAINTAINERS: remove Tudor Ambarus as SPI NOR maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"Intel VT-d:
- Abort all pending requests on dev_tlb_inv timeout to avoid
hardlockup
- Limit IOPF handling to PRI-capable device to avoid SVA attach
failure
AMD-Vi:
- Make sure identity domain is not used when SNP is active
Core fixes:
- Handle mapping IOVA 0x0 correctly
- Fix crash in SVA code
- Kernel-doc fix in IO-PGTable code"
* tag 'iommu-fixes-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/amd: Block identity domain when SNP enabled
iommu/sva: Fix crash in iommu_sva_unbind_device()
iommu/io-pgtable: fix all kernel-doc warnings in io-pgtable.h
iommu: Fix mapping check for 0x0 to avoid re-mapping it
iommu/vt-d: Only handle IOPF for SVA when PRI is supported
iommu/vt-d: Fix intel iommu iotlb sync hardlockup and retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's a small crop of fixes for the MPAM resctrl driver, a fix for
SCS/PAC patching with the AMDGPU driver and a page-table fix for
realms running with 52-bit physical addresses:
- Fix DWARF parsing for SCS/PAC patching to work with very large
modules (such as the amdgpu driver)
- Fixes to the mpam resctrl driver
- Fix broken handling of 52-bit physical addresses when sharing
memory from within a realm"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: realm: Fix PTE_NS_SHARED for 52bit PA support
arm_mpam: Force __iomem casts
arm_mpam: Disable preemption when making accesses to fake MSC in kunit test
arm_mpam: Fix null pointer dereference when restoring bandwidth counters
arm64/scs: Fix handling of advance_loc4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Fix ARM64 MSHV support (Anirudh Rayabharam)
- Fix MSHV driver memory handling issues (Stanislav Kinsburskii)
- Update maintainers for Hyper-V DRM driver (Saurabh Sengar)
- Misc clean up in MSHV crashdump code (Ard Biesheuvel, Uros Bizjak)
- Minor improvements to MSHV code (Mukesh R, Wei Liu)
- Revert not yet released MSHV scrub partition hypercall (Wei Liu)
* tag 'hyperv-fixes-signed-20260319' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: Fix error handling in mshv_region_pin
MAINTAINERS: Update maintainers for Hyper-V DRM driver
mshv: Fix use-after-free in mshv_map_user_memory error path
mshv: pass struct mshv_user_mem_region by reference
x86/hyperv: Use any general-purpose register when saving %cr2 and %cr8
x86/hyperv: Use current_stack_pointer to avoid asm() in hv_hvcrash_ctxt_save()
x86/hyperv: Save segment registers directly to memory in hv_hvcrash_ctxt_save()
x86/hyperv: Use __naked attribute to fix stackless C function
Revert "mshv: expose the scrub partition hypercall"
mshv: add arm64 support for doorbell & intercept SINTs
mshv: refactor synic init and cleanup
x86/hyperv: print out reserved vectors in hexadecimal
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- A number of teardown fixes (Daniele, Matt Brost, Zhanjun, Ashutosh)
- Skip over non-leaf PTE for PRL generation (Brian)
- Fix an unitialized variable (Umesh)
- Fix a missing runtime PM reference (Sanjay)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/abxj4_dBHYBiSvDG@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-7.0-2026-03-19:
amdgpu:
- Fix gamma 2.2 colorop TFs
- BO list fix
- LTO fix
- DC FP fix
- DisplayID handling fix
- DCN 2.01 fix
- MMHUB boundary fixes
- ISP fix
- TLB fence fix
- Hainan pm fix
radeon:
- Hainan pm fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260319131013.36639-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A doc warning fix and a memory leak fix for vmwgfx, a deadlock fix and
interrupt handling fixes for imagination, a locking fix for
pagemap_until, a UAF fix for drm_dev_unplug, and a multi-channel audio
handling fix for dw-hdmi-qp.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260319-lush-righteous-malamute-e7bb98@houat
|
|
Commit 4ab7bb976343 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
modified ata_scsiop_maint_in() to directly call
ata_scsi_set_invalid_field() to set the field pointer of the sense data
of a failed MAINTENANCE IN command. However, in the case of an invalid
command format, the sense data field incorrectly indicates byte 1 of
the CDB. Fix this to indicate byte 2 of the command.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4ab7bb976343 ("ata: libata-scsi: Refactor ata_scsiop_maint_in()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Create pwrctrl devices only for DT nodes below a PCI controller that
describe PCI devices and are related to a power supply; this prevents
waiting indefinitely for pwrctrl drivers that will never probe
(Manivannan Sadhasivam)
- Restore endpoint BAR mapping on subrange setup failure to make
selftest reliable (Koichiro Den)
* tag 'pci-v7.0-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: endpoint: pci-epf-test: Roll back BAR mapping when subrange setup fails
PCI/pwrctrl: Create pwrctrl devices only for PCI device nodes
PCI/pwrctrl: Ensure that remote endpoint node parent has supply requirement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, Bluetooth and netfilter.
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep"
* tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
MPTCP: fix lock class name family in pm_nl_create_listen_socket
icmp: fix NULL pointer dereference in icmp_tag_validation()
net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths
net: shaper: protect from late creation of hierarchy
net: shaper: protect late read accesses to the hierarchy
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
net/mlx5e: Fix race condition during IPSec ESN update
net/mlx5e: Prevent concurrent access to IPSec ASO context
net/mlx5: qos: Restrict RTNL area to avoid a lock cycle
ipv6: add NULL checks for idev in SRv6 paths
NFC: nxp-nci: allow GPIOs to sleep
net: macb: fix uninitialized rx_fs_lock
net: macb: fix use-after-free access to PTP clock
netdevsim: drop PSP ext ref on forward failure
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
...
|
|
ccs_mode_store() calls xe_gt_reset() which internally invokes
xe_pm_runtime_get_noresume(). That function requires the caller
to already hold an outer runtime PM reference and warns if none
is held:
[46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection
[46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at
xe_pm_runtime_get_noresume+0x8b/0xc0
Fix this by protecting xe_gt_reset() with the scope-based
guard(xe_pm_runtime)(xe), which is the preferred form when
the reference lifetime matches a single scope.
v2:
- Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng)
- Update commit message accordingly
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7593
Fixes: 480b358e7d8e ("drm/xe: Do not wake device during a GT reset")
Cc: <stable@vger.kernel.org> # v6.19+
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260313071608.3459480-2-sanjay.kumar.yadav@intel.com
(cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
Cc: stable@vger.kernel.org
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-8-zhanjun.dong@intel.com
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an idle loop issue exposed by recent changes and a race
condition related to device removal in the runtime PM core code:
- Consolidate the handling of two special cases in the idle loop that
occur when only one CPU idle state is present (Rafael Wysocki)
- Fix a race condition related to device removal in the runtime PM
core code that may cause a stale device object pointer to be
dereferenced (Bart Van Assche)"
* tag 'pm-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix a race condition related to device removal
sched: idle: Consolidate the handling of two special cases
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix an MFD child automatic modprobe issue introduced recently,
an ACPI processor driver issue introduced by a previous fix and an
ACPICA issue causing confusing messages regarding _DSM arguments to be
printed:
- Update the format of the last argument of _DSM to avoid printing
confusing error messages in some cases (Saket Dumbre)
- Fix MFD child automatic modprobe issue by removing a stale check
from acpi_companion_match() (Pratap Nirujogi)
- Prevent possible use-after-free in acpi_processor_errata_piix4()
from occurring by rearranging the code to print debug messages
while holding references to relevant device objects (Rafael
Wysocki)"
* tag 'acpi-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Fix MFD child automatic modprobe issue
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
ACPICA: Update the format of Arg3 of _DSM
|
|
Merge an ACPICA fix and a core ACPI support code fix for 7.0-rc5:
- Update the format of the last argument of _DSM to avoid printing
confusing error messages in some cases (Saket Dumbre)
- Fix MFD child automatic modprobe issue by removing a stale check
from acpi_companion_match() (Pratap Nirujogi)
* acpica:
ACPICA: Update the format of Arg3 of _DSM
* acpi-bus:
ACPI: bus: Fix MFD child automatic modprobe issue
|
|
Getting engine specific CTX TIMESTAMP register can fail. In that case,
if the context is active, new_ts is uninitialized. Fix that case by
initializing new_ts to the last value that was sampled in SW -
lrc->ctx_timestamp.
Flagged by static analysis.
v2: Fix new_ts initialization (Ashutosh)
Fixes: bb63e7257e63 ("drm/xe: Avoid toggling schedule state to check LRC timestamp in TDR")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260312125308.3126607-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 466e75d48038af252187855058a7a9312db9d2f8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Some OA data might be present in the OA buffer when OA stream is
disabled. Allow UMD's to retrieve this data, so that all data till the
point when OA stream is disabled can be retrieved.
v2: Update tail pointer after disable (Umesh)
Fixes: efb315d0a013 ("drm/xe/oa/uapi: Read file_operation")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa<umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260313053630.3176100-1-ashutosh.dixit@intel.com
(cherry picked from commit 4ff57c5e8dbba23b5457be12f9709d5c016da16e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The check using xe_child->base.children was insufficient in determining
if a pte was a leaf node. So explicitly skip over every non-leaf pt and
conditionally abort if there is a scenario where a non-leaf pt is
interleaved between leaf pt, which results in the page walker skipping
over some leaf pt.
Note that the behavior being targeted for abort is
PD[0] = 2M PTE
PD[1] = PT -> 512 4K PTEs
PD[2] = 2M PTE
results in abort, page walker won't descend PD[1].
With new abort, ensuring valid PRL before handling a second abort.
v2:
- Revert to previous assert.
- Revised non-leaf handling for interleaf child pt and leaf pte.
- Update comments to specifications. (Stuart)
- Remove unnecessary XE_PTE_PS64. (Matthew B)
v3:
- Modify secondary abort to only check non-leaf PTEs. (Matthew B)
Fixes: b912138df299 ("drm/xe: Create page reclaim list on unbind")
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260305171546.67691-6-brian3.nguyen@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 1d123587525db86cc8f0d2beb35d9e33ca3ade83)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The GuC CT state transition requires moving to the STOP state before
entering the DISABLED state. Update the driver teardown sequence to make
the proper state machine transitions.
Fixes: ee4b32220a6b ("drm/xe/guc: Add devm release action to safely tear down CT")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-6-zhanjun.dong@intel.com
(cherry picked from commit dace8cb0032f57ea67c87b3b92ad73c89dd2db44)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The intent of wedging a device is to allow queues to continue running
only in wedged mode 2. In other modes, queues should initiate cleanup
and signal all remaining fences. Fix xe_guc_submit_wedge to correctly
clean up queues when wedge mode != 2.
Fixes: 7dbe8af13c18 ("drm/xe: Wedge the entire device")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-4-zhanjun.dong@intel.com
(cherry picked from commit e25ba41c8227c5393c16e4aab398076014bd345f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
In GuC submit fini, forcefully tear down any exec queues by disabling
CTs, stopping the scheduler (which cleans up lost G2H), killing all
remaining queues, and resuming scheduling to allow any remaining cleanup
actions to complete and signal any remaining fences.
Split guc_submit_fini into device related and software only part. Using
device-managed and drm-managed action guarantees the correct ordering of
cleanup.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-3-zhanjun.dong@intel.com
(cherry picked from commit a6ab444a111a59924bd9d0c1e0613a75a0a40b89)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
xe_guc_submit_pause_abort is intended to be called after something
disastrous occurs (e.g., VF migration fails, device wedging, or driver
unload) and should immediately trigger the teardown of remaining
submission state. With that, kill any remaining queues in this function.
Fixes: 7c4b7e34c83b ("drm/xe/vf: Abort VF post migration recovery on failure")
Cc: stable@vger.kernel.org
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260310225039.1320161-2-zhanjun.dong@intel.com
(cherry picked from commit 78f3bf00be4f15daead02ba32d4737129419c902)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
By using the same variable for both the return of poll_timeout_us and
the return of the polled function guc_wait_ucode, the return value of
the latter is overwritten and lost after exiting the polling loop. Since
guc_wait_ucode returns -1 on GuC load failure, we lose that information
and always continue as if the GuC had been loaded correctly.
This is fixed by simply using 2 separate variables.
Fixes: a4916b4da448 ("drm/xe/guc: Refactor GuC load to use poll_timeout_us()")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260303001732.2540493-2-daniele.ceraolospurio@intel.com
(cherry picked from commit c85ec5c5753a46b5c2aea1292536487be9470ffe)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- cfg80211:
- guarantee pmsr work is cancelled
- mac80211:
- reject TDLS operations on non-TDLS stations
- fix crash in AP_VLAN bandwidth change
- fix leak or double-free on some TX preparation
failures
- remove keys needed for beacons _after_ stopping
those
- fix debugfs static branch race
- avoid underflow in inactive time
- fix another NULL dereference in mesh on invalid
frames
- ti/wlcore: avoid infinite realloc loop
* tag 'wireless-2026-03-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
wifi: mac80211: fix NULL deref in mesh_matches_local()
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
wifi: mac80211: use jiffies_delta_to_msecs() for sta_info inactive times
wifi: mac80211: remove keys after disabling beaconing
wifi: mac80211_hwsim: fully initialise PMSR capabilities
====================
Link: https://patch.msgid.link/20260318172515.381148-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave.
Fixes: caafa84251b88 ("bonding: add the debugfs interface to see RLB hash table")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317005034.1888794-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window.
Fixes: fef06678931f ("net/mlx5e: Fix ESN update kernel panic")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained.
Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A lock dependency cycle exists where:
1. mlx5_ib_roce_init -> mlx5_core_uplink_netdev_event_replay ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem) ->
mlx5e_mdev_notifier_event -> mlx5_netdev_notifier_register ->
register_netdevice_notifier_dev_net (takes rtnl)
=> notifier_rwsem -> rtnl
2. mlx5e_probe -> _mlx5e_probe ->
mlx5_core_uplink_netdev_set (takes uplink_netdev_lock) ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem)
=> uplink_netdev_lock -> notifier_rwsem
3: devlink_nl_rate_set_doit -> devlink_nl_rate_set ->
mlx5_esw_devlink_rate_leaf_tx_max_set -> esw_qos_devlink_rate_to_mbps ->
mlx5_esw_qos_max_link_speed_get (takes rtnl) ->
mlx5_esw_qos_lag_link_speed_get_locked ->
mlx5_uplink_netdev_get (takes uplink_netdev_lock)
=> rtnl -> uplink_netdev_lock
=> BOOM! (lock cycle)
Fix that by restricting the rtnl-protected section to just the necessary
part, the call to netdev_master_upper_dev_get and speed querying, so
that the last lock dependency is avoided and the cycle doesn't close.
This is safe because mlx5_uplink_netdev_get uses netdev_hold to keep the
uplink netdev alive while its master device is queried.
Use this opportunity to rename the ambiguously-named "hold_rtnl_lock"
argument to "take_rtnl" and remove the "_locked" suffix from
mlx5_esw_qos_lag_link_speed_get_locked.
Fixes: 6b4be64fd9fe ("net/mlx5e: Harden uplink netdev access against device unbind")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-03-17 (igc, iavf, libie)
Kohei Enju adds use of helper function to add missing update of
skb->tail when padding is needed for igc.
Zdenek Bouska clears stale XSK timestamps when taking down Tx rings on
igc.
Petr Oros changes handling of iavf VLAN filter handling when an added
VLAN is also on the delete list to which can race and cause the VLAN
filter to not be added.
Michal frees cmd_buf for libie firmware logging to stop memory leaks.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
libie: prevent memleak in fwlog code
iavf: fix VLAN filter lost on add/delete race
igc: fix page fault in XDP TX timestamps handling
igc: fix missing update of skb->tail in igc_xmit_frame()
====================
Link: https://patch.msgid.link/20260317211906.115505-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --
Fixes: 43201767b44c ("NFC: nxp-nci: Convert to use GPIO descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If hardware doesn't support RX Flow Filters, rx_fs_lock spinlock is not
initialized leading to the following assertion splat triggerable via
set_rxnfc callback.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 949 Comm: syz.0.6 Not tainted 6.1.164+ #113
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:974 [inline]
register_lock_class+0x141b/0x17f0 kernel/locking/lockdep.c:1287
__lock_acquire+0x74f/0x6c40 kernel/locking/lockdep.c:4928
lock_acquire kernel/locking/lockdep.c:5662 [inline]
lock_acquire+0x190/0x4b0 kernel/locking/lockdep.c:5627
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x33/0x50 kernel/locking/spinlock.c:162
gem_del_flow_filter drivers/net/ethernet/cadence/macb_main.c:3562 [inline]
gem_set_rxnfc+0x533/0xac0 drivers/net/ethernet/cadence/macb_main.c:3667
ethtool_set_rxnfc+0x18c/0x280 net/ethtool/ioctl.c:961
__dev_ethtool net/ethtool/ioctl.c:2956 [inline]
dev_ethtool+0x229c/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
A more straightforward solution would be to always initialize rx_fs_lock,
just like rx_fs_list. However, in this case the driver set_rxnfc callback
would return with a rather confusing error code, e.g. -EINVAL. So deny
set_rxnfc attempts directly if the RX filtering feature is not supported
by hardware.
Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_flags+0x92/0x170 net/core/dev.c:8722
dev_ifsioc+0x151/0xe00 net/core/dev_ioctl.c:326
dev_ioctl+0x33e/0x1070 net/core/dev_ioctl.c:572
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Set the PTP clock pointer to NULL after unregistering.
Fixes: c2594d804d5c ("macb: Common code to enable ptp support for MACB/GEM")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_do_psp() takes an extra reference to the PSP skb extension so the
extension survives __dev_forward_skb(). That forward path scrubs the skb
and drops attached skb extensions before nsim_psp_handle_ext() can
reattach the PSP metadata.
If __dev_forward_skb() fails in nsim_forward_skb(), the function returns
before nsim_psp_handle_ext() can attach that extension to the skb, leaving
the extra reference leaked.
Drop the saved PSP extension reference before returning from the
forward-failure path. Guard the put because plain or non-decapsulated
traffic can also fail forwarding without ever taking the extra PSP
reference.
Fixes: f857478d6206 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Wesley Atwell <atwellwea@gmail.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260317061431.1482716-1-atwellwea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Disable the "padlock" SHA-1 and SHA-256 driver on Zhaoxin
processors, since it does not compute hash values correctly
- Make a generated file be removed by 'make clean'
- Fix excessive stack usage in some of the arm64 AES code
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: powerpc: Add powerpc/aesp8-ppc.S to clean-files
crypto: padlock-sha - Disable for Zhaoxin processor
crypto: arm64/aes-neonbs - Move key expansion off the stack
|
|
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic().
Cc: stable@vger.kernel.org
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Timings of the nand are adjusted by pl35x_nfc_setup_interface() but
actually applied by the pl35x_nand_select_target() function.
If there is only one nand chip, the pl35x_nand_select_target() will only
apply the timings once since the test at its beginning will always be true
after the first call to this function. As a result, the hardware will
keep using the default timings set at boot to detect the nand chip, not
the optimal ones.
With this patch, we program directly the new timings when
pl35x_nfc_setup_interface() is called.
Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This helper really is just a little helper for internal purposes, and is
I/O operation oriented, despite its name. It has already been misused
in commit 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support"), so
rename it to clarify its purpose: it is only useful for reads and page
programs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Commit 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support") adds a
controller check to make sure the core will not use CR reads on
controllers not supporting them. The approach is valid but the fix is
incorrect. Unfortunately, the author could not catch it, because the
expected behavior was met. The patch indeed drops the RDCR capability,
but it does it for all controllers!
The issue comes from the use of spi_nor_spimem_check_op() which is an
internal helper dedicated to check read/write operations only, despite
its generic name.
This helper looks for the biggest number of address bytes that can be
used for a page operation and tries 4 then 3. It then calls the usual
spi-mem helpers to do the checks. These will always fail because there
is now an inconsistency: the address cycles are forced to 4 (then 3)
bytes, but the bus width during the address cycles rightfully remains
0. There is a non-zero address length but a zero address bus width,
which is an invalid combination.
The correct check in this case is to directly call spi_mem_supports_op()
which doesn't messes up with the operation content.
Fixes: 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support")
Cc: stable@vger.kernel.org
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The current error handling has two issues:
First, pin_user_pages_fast() can return a short pin count (less than
requested but greater than zero) when it cannot pin all requested pages.
This is treated as success, leading to partially pinned regions being
used, which causes memory corruption.
Second, when an error occurs mid-loop, already pinned pages from the
current batch are not properly accounted for before calling
mshv_region_invalidate_pages(), causing a page reference leak.
Treat short pins as errors and fix partial batch accounting before
cleanup.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The firmware drivers for ARM SCMI, FF-A and the Tee subsystem, as
well as the reset controller and cache controller subsystem all see
small bugfixes for reference ounting errors, ABI correctness, and
NULL pointer dereferences.
Similarly, there are multiple reference counting fixes in drivers/soc/
for vendor specific drivers (rockchips, microchip), while the
freescale drivers get a fix for a race condition and error handling.
The devicetree fixes for Rockchips and NXP got held up, so for
the moment there is only Renesas fixing problesm with SD card
initialization, a boot hang on one board and incorrect descriptions
for interrupts and clock registers on some SoCs. The Microchip
polarfire gets a dts fix for a boot time warning.
A defconfig fix avoids a warning about a conflicting assignment"
* tag 'soc-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: multi_v7_defconfig: Drop duplicate CONFIG_TI_PRUSS=m
firmware: arm_scmi: Spelling s/mulit/multi/, s/currenly/currently/
firmware: arm_scmi: Fix NULL dereference on notify error path
firmware: arm_scpi: Fix device_node reference leak in probe path
firmware: arm_ffa: Remove vm_id argument in ffa_rxtx_unmap()
arm64: dts: renesas: r8a78000: Fix out-of-range SPI interrupt numbers
arm64: dts: renesas: rzg3s-smarc-som: Set bypass for Versa3 PLL2
arm64: dts: renesas: r9a09g087: Fix CPG register region sizes
arm64: dts: renesas: r9a09g077: Fix CPG register region sizes
arm64: dts: renesas: r9a09g057: Remove wdt{0,2,3} nodes
arm64: dts: renesas: rzv2-evk-cn15-sd: Add ramp delay for SD0 regulator
arm64: dts: renesas: rzt2h-n2h-evk: Add ramp delay for SD0 card regulator
tee: shm: Remove refcounting of kernel pages
reset: rzg2l-usbphy-ctrl: Check pwrrdy is valid before using it
soc: fsl: cpm1: qmc: Fix error check for devm_ioremap_resource() in qmc_qe_init_resources()
soc: fsl: qbman: fix race condition in qman_destroy_fq
soc: rockchip: grf: Add missing of_node_put() when returning
cache: ax45mp: Fix device node reference leak in ax45mp_cache_init()
cache: starfive: fix device node leak in starlink_cache_init()
riscv: dts: microchip: add can resets to mpfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
- Remove duplicate snp_leak_pages call in ccp
* tag 'v7.0-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix leaking the same page twice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v7.0
Few fixes to:
1. Address a NULL dereference in the SCMI notify error path by ensurin
__scmi_event_handler_get_ops() consistently returns an ERR_PTR on
failure, as expected by callers.
2. Fix a device_node reference leak in the SCPI probe path by introducing
scope-based cleanup for acquired DT nodes.
3. Correct minor spelling errors.
* tag 'scmi-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Spelling s/mulit/multi/, s/currenly/currently/
firmware: arm_scmi: Fix NULL dereference on notify error path
firmware: arm_scpi: Fix device_node reference leak in probe path
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
