summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2024-07-25scsi: libsas: Fix exp-attached device scan after probe failure scanned in ↵Xingui Yang
again after probe failed [ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ] The expander phy will be treated as broadcast flutter in the next revalidation after the exp-attached end device probe failed, as follows: [78779.654026] sas: broadcast received: 0 [78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10 [78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached [78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp) [78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found [78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 [78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 ... [78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19 [78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone [78835.187487] sas: broadcast received: 0 [78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10 [78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed [78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE) [78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05 [78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp) [78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter [78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0 The cause of the problem is that the related ex_phy's attached_sas_addr was not cleared after the end device probe failed, so reset it. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Set qed_slowpath_params to zero before useSaurav Kashyap
[ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Wait for stag work during unloadSaurav Kashyap
[ Upstream commit 78e88472b60936025b83eba57cffa59d3501dc07 ] If stag work is already scheduled and unload is called, it can lead to issues as unload cleans up the work element. Wait for stag work to get completed before cleanup during unload. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: qedf: Don't process stag work during unload and recoverySaurav Kashyap
[ Upstream commit 51071f0831ea975fc045526dd7e17efe669dc6e1 ] Stag work can cause issues during unload and recovery, hence don't process it. Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: sr: Fix unintentional arithmetic wraparoundJustin Stitt
[ Upstream commit 9fad9d560af5c654bb38e0b07ee54a4e9acdc5cd ] Running syzkaller with the newly reintroduced signed integer overflow sanitizer produces this report: [ 65.194362] ------------[ cut here ]------------ [ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9 [ 65.203607] -2147483648 * 177 cannot be represented in type 'int' [ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1 [ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 65.219923] Call Trace: [ 65.221556] <TASK> [ 65.223029] dump_stack_lvl+0x93/0xd0 [ 65.225573] handle_overflow+0x171/0x1b0 [ 65.228219] sr_select_speed+0xeb/0xf0 [ 65.230786] ? __pm_runtime_resume+0xe6/0x130 [ 65.233606] sr_block_ioctl+0x15d/0x1d0 ... Historically, the signed integer overflow sanitizer did not work in the kernel due to its interaction with `-fwrapv` but this has since been changed [1] in the newest version of Clang. It was re-enabled in the kernel with Commit 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer"). Firstly, let's change the type of "speed" to unsigned long as sr_select_speed()'s only caller passes in an unsigned long anyways. $ git grep '\.select_speed' | drivers/scsi/sr.c: .select_speed = sr_select_speed, ... | static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi, | unsigned long arg) | { | ... | return cdi->ops->select_speed(cdi, arg); | } Next, let's add an extra check to make sure we don't exceed 0xffff/177 (350) since 0xffff is the max speed. This has two benefits: 1) we deal with integer overflow before it happens and 2) we properly respect the max speed of 0xffff. There are some "magic" numbers here but I did not want to change more than what was necessary. Link: https://github.com/llvm/llvm-project/pull/82432 [1] Closes: https://github.com/KSPP/linux/issues/357 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25scsi: core: alua: I/O errors for ALUA state transitionsMartin Wilck
[ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/ Co-developed-by: Rajashekhar M A <rajs@netapp.com> Co-developed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <martin.wilck@suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: mpi3mr: Use proper format specifier in mpi3mr_sas_port_add()Nathan Chancellor
commit 9f365cb8bbd0162963d6852651d7c9e30adcb7b5 upstream. When building for a 32-bit platform such as ARM or i386, for which size_t is unsigned int, there is a warning due to using an unsigned long format specifier: drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat] 1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n", | ~~~ | %u 1370 | i, sizeof(mr_sas_port->phy_mask) * 8); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Use the proper format specifier for size_t, %zu, to resolve the warning for all platforms. Fixes: 3668651def2c ("scsi: mpi3mr: Sanitise num_phys") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-11scsi: mpi3mr: Sanitise num_physTomas Henzl
[ Upstream commit 3668651def2c1622904e58b0280ee93121f2b10b ] Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20240226151013.8653-1-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-11scsi: qedf: Make qedf_execute_tmf() non-preemptibleJohn Meneghini
[ Upstream commit 0d8b637c9c5eeaa1a4e3dfb336f3ff918eb64fec ] Stop calling smp_processor_id() from preemptible code in qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel. [ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646 [ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf] Tested-by: Guangwu Zhang <guazhang@redhat.com> Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Link: https://lore.kernel.org/r/20240403150155.412954-1-jmeneghi@redhat.com Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-05ata,scsi: libata-core: Do not leak memory for ata_port struct membersNiklas Cassel
[ Upstream commit f6549f538fe0b2c389e1a7037f4e21039e25137a ] libsas is currently not freeing all the struct ata_port struct members, e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL). Add a function, ata_port_free(), that is used to free a ata_port, including its struct members. It makes sense to keep the code related to freeing a ata_port in its own function, which will also free all the struct members of struct ata_port. Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-27scsi: core: Introduce the BLIST_SKIP_IO_HINTS flagBart Van Assche
commit 633aeefafc9c2a07a76a62be6aac1d73c3e3defa upstream. Prepare for skipping the IO Advice Hints Grouping mode page for USB storage devices. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Joao Machado <jocrismachado@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Christian Heusel <christian@heusel.eu> Cc: stable@vger.kernel.org Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-27scsi: qedi: Fix crash while reading debugfs attributeManish Rangankar
[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ] The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d Tested-by: Martin Hoyer <mhoyer@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21scsi: sd: Use READ(16) when reading block zero on large capacity disksMartin K. Petersen
commit 7926d51f73e0434a6250c2fd1a0555f98d9a62da upstream. Commit 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") triggered a read to LBA 0 before attempting to inquire about device characteristics. This was done because some protocol bridge devices will return generic values until an attached storage device's media has been accessed. Pierre Tomon reported that this change caused problems on a large capacity external drive connected via a bridge device. The bridge in question does not appear to implement the READ(10) command. Issue a READ(16) instead of READ(10) when a device has been identified as preferring 16-byte commands (use_16_for_rw heuristic). Link: https://bugzilla.kernel.org/show_bug.cgi?id=218890 Link: https://lore.kernel.org/r/70dd7ae0-b6b1-48e1-bb59-53b7c7f18274@rowland.harvard.edu Link: https://lore.kernel.org/r/20240605022521.3960956-1-martin.petersen@oracle.com Fixes: 321da3dc1f3c ("scsi: sd: usb_storage: uas: Access media prior to querying device properties") Cc: stable@vger.kernel.org Reported-by: Pierre Tomon <pierretom+12@ik.me> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Pierre Tomon <pierretom+12@ik.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memoryBreno Leitao
commit 4254dfeda82f20844299dca6c38cbffcfd499f41 upstream. There is a potential out-of-bounds access when using test_bit() on a single word. The test_bit() and set_bit() functions operate on long values, and when testing or setting a single word, they can exceed the word boundary. KASAN detects this issue and produces a dump: BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965 For full log, please look at [1]. Make the allocation at least the size of sizeof(unsigned long) so that set_bit() and test_bit() have sufficient room for read/write operations without overwriting unallocated memory. [1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/ Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Cc: stable@vger.kernel.org Suggested-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240605085530.499432-1-leitao@debian.org Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: mpi3mr: Fix ATA NCQ priority supportDamien Le Moal
commit 90e6f08915ec6efe46570420412a65050ec826b2 upstream. The function mpi3mr_qcmd() of the mpi3mr driver is able to indicate to the HBA if a read or write command directed at an ATA device should be translated to an NCQ read/write command with the high prioiryt bit set when the request uses the RT priority class and the user has enabled NCQ priority through sysfs. However, unlike the mpt3sas driver, the mpi3mr driver does not define the sas_ncq_prio_supported and sas_ncq_prio_enable sysfs attributes, so the ncq_prio_enable field of struct mpi3mr_sdev_priv_data is never actually set and NCQ Priority cannot ever be used. Fix this by defining these missing atributes to allow a user to check if an ATA device supports NCQ priority and to enable/disable the use of NCQ priority. To do this, lift the function scsih_ncq_prio_supp() out of the mpt3sas driver and make it the generic SCSI SAS transport function sas_ata_ncq_prio_supported(). Nothing in that function is hardware specific, so this function can be used in both the mpt3sas driver and the mpi3mr driver. Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 023ab2a9b4ed ("scsi: mpi3mr: Add support for queue command processing") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240611083435.92961-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21scsi: core: Disable CDL by defaultDamien Le Moal
commit 52912ca87e2b810e5acdcdc452593d30c9187d8f upstream. For SCSI devices supporting the Command Duration Limits feature set, the user can enable/disable this feature use through the sysfs device attribute "cdl_enable". This attribute modification triggers a call to scsi_cdl_enable() to enable and disable the feature for ATA devices and set the scsi device cdl_enable field to the user provided bool value. For SCSI devices supporting CDL, the feature set is always enabled and scsi_cdl_enable() is reduced to setting the cdl_enable field. However, for ATA devices, a drive may spin-up with the CDL feature enabled by default. But the SCSI device cdl_enable field is always initialized to false (CDL disabled), regardless of the actual device CDL feature state. For ATA devices managed by libata (or libsas), libata-core always disables the CDL feature set when the device is attached, thus syncing the state of the CDL feature on the device and of the SCSI device cdl_enable field. However, for ATA devices connected to a SAS HBA, the CDL feature is not disabled on scan for ATA devices that have this feature enabled by default, leading to an inconsistent state of the feature on the device with the SCSI device cdl_enable field. Avoid this inconsistency by adding a call to scsi_cdl_enable() in scsi_cdl_check() to make sure that the device-side state of the CDL feature set always matches the scsi device cdl_enable field state. This implies that CDL will always be disabled for ATA devices connected to SAS HBAs, which is consistent with libata/libsas initialization of the device. Reported-by: Scott McCoy <scott.mccoy@wdc.com> Fixes: 1b22cfb14142 ("scsi: core: Allow enabling and disabling command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240607012507.111488-1-dlemoal@kernel.org Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-16scsi: core: Handle devices which return an unusually large VPD page countMartin K. Petersen
commit d09c05aa35909adb7d29f92f0cd79fdcd1338ef0 upstream. Peter Schneider reported that a system would no longer boot after updating to 6.8.4. Peter bisected the issue and identified commit b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") as being the culprit. Turns out the enclosure device in Peter's system reports a byteswapped page length for VPD page 0. It reports "02 00" as page length instead of "00 02". This causes us to attempt to access 516 bytes (page length + header) of information despite only 2 pages being present. Limit the page search scope to the size of our VPD buffer to guard against devices returning a larger page count than requested. Link: https://lore.kernel.org/r/20240521023040.2703884-1-martin.petersen@oracle.com Fixes: b5fc07a5fb56 ("scsi: core: Consult supported VPD page list prior to fetching page") Cc: stable@vger.kernel.org Reported-by: Peter Schneider <pschneider1968@googlemail.com> Closes: https://lore.kernel.org/all/eec6ebbf-061b-4a7b-96dc-ea748aa4d035@googlemail.com/ Tested-by: Peter Schneider <pschneider1968@googlemail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12sd: also set max_user_sectors when setting max_sectorsChristoph Hellwig
[ Upstream commit bafea1c58b24be594d97841ced1b7ae0347bf6e3 ] sd can set a max_sectors value that is lower than the max_hw_sectors limit based on the block limits VPD page. While this is rather unusual, it used to work until the max_user_sectors field was split out to cleanly deal with conflicting hardware and user limits when the hardware limit changes. Also set max_user_sectors to ensure the limit can properly be stacked. Fixes: 4f563a64732d ("block: add a max_user_discard_sectors queue limit") Reported-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240523182618.602003-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-30scsi: qla2xxx: Fix debugfs output for fw_resource_countHimanshu Madhani
[ Upstream commit 998d09c5ef6183bd8137d1a892ba255b15978bb4 ] DebugFS output for fw_resource_count shows: estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141] estimate exchange2 used[0] high water limit [1945] Which shows incorrect display due to missing newline in seq_print(). [mkp: fix checkpatch warning about space before newline] Fixes: 5f63a163ed2f ("scsi: qla2xxx: Fix exchange oversubscription for management commands") Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com> Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-30scsi: qedf: Ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit d0184a375ee797eb657d74861ba0935b6e405c62 ] Currently, we allocate a count-sized kernel buffer and copy count from userspace to that buffer. Later, we use kstrtouint on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using kstrtouint. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-30scsi: bfa: Ensure the copied buf is NUL terminatedBui Quang Minh
[ Upstream commit 13d0cecb4626fae67c00c84d3c7851f6b62f7df3 ] Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from userspace to that buffer. Later, we use sscanf on this buffer but we don't ensure that the string is terminated inside the buffer, this can lead to OOB read when using sscanf. Fix this issue by using memdup_user_nul instead of memdup_user. Fixes: 9f30b674759b ("bfa: replace 2 kzalloc/copy_from_user by memdup_user") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-30scsi: hpsa: Fix allocation size for Scsi_Host private dataYuri Karpov
[ Upstream commit 504e2bed5d50610c1836046c0c195b0a6dba9c72 ] struct Scsi_Host private data contains pointer to struct ctlr_info. Restore allocation of only 8 bytes to store pointer in struct Scsi_Host private data area. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bbbd25499100 ("scsi: hpsa: Fix allocation size for scsi_host_alloc()") Signed-off-by: Yuri Karpov <YKarpov@ispras.ru> Link: https://lore.kernel.org/r/20240312170447.743709-1-YKarpov@ispras.ru Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-30scsi: libsas: Fix the failure of adding phy with zero-address to portXingui Yang
[ Upstream commit 06036a0a5db34642c5dbe22021a767141f010b7a ] As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions"), reset the phy->entacted_sas_addr address to a zero-address when the link rate is less than 1.5G. Currently we find that when a new device is attached, and the link rate is less than 1.5G, but the device type is not NO_DEVICE, for example: the link rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting the phy->entacted_sas_addr address to the zero address, the port will continue to be created for the phy with the zero-address, and other phys with the zero-address will be tried to be added to the new port: [562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device) // phy19 is deleted but still on the parent port's phy_list [562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached [562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp) [562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port Therefore, it should be the same as sas_get_phy_attached_dev(). Only when device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address. Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-24scsi: sd: Only print updates to permanent stream countJohn Garry
Just rescanning a partition causes a print similar to the following to appear: [ 1.484964] sd 0:0:0:0: [sda] permanent stream count = 5 This is bothersome, so only print this message for an update. Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information") Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20240412094407.496251-1-john.g.garry@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-08scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERINGBart Van Assche
There is code in the SCSI core that sets the SCMD_FAIL_IF_RECOVERING flag but there is no code that clears this flag. Instead of only clearing SCMD_INITIALIZED in scsi_end_request(), clear all flags. It is never necessary to preserve any command flags inside scsi_end_request(). Cc: stable@vger.kernel.org Fixes: 310bcaef6d7e ("scsi: core: Support failing requests while recovering") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240325224417.1477135-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-05scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()Dan Carpenter
The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption. Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/5c125b2f-92dd-412b-9b6f-fc3a3207bd60@moroto.mountain Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-05scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()Xiang Chen
We found that the second parameter of function ata_wait_after_reset() is incorrectly used. We call smp_ata_check_ready_type() to poll the device type until the 30s timeout, so the correct deadline should be (jiffies + 30000). Fixes: 3c2673a09cf1 ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset") Co-developed-by: xiabing <xiabing12@h-partners.com> Signed-off-by: xiabing <xiabing12@h-partners.com> Co-developed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/20240402035513.2024241-3-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-05scsi: hisi_sas: Handle the NCQ error returned by D2H frameXiang Chen
We find that some disks use D2H frame instead of SDB frame to return NCQ error. Currently, only the I/O corresponding to the D2H frame is processed in this scenario, which does not meet the processing requirements of the NCQ error scenario. So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk in this scenario. Co-developed-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/20240402035513.2024241-2-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-04scsi: sg: Avoid race in error handling & drop bogus warnAlexander Wetzel
Commit 27f58c04a8f4 ("scsi: sg: Avoid sg device teardown race") introduced an incorrect WARN_ON_ONCE() and missed a sequence where sg_device_destroy() was used after scsi_device_put(). sg_device_destroy() is accessing the parent scsi_device request_queue which will already be set to NULL when the preceding call to scsi_device_put() removed the last reference to the parent scsi_device. Drop the incorrect WARN_ON_ONCE() - allowing more than one concurrent access to the sg device - and make sure sg_device_destroy() is not used after scsi_device_put() in the error handling. Link: https://lore.kernel.org/all/5375B275-D137-4D5F-BE25-6AF8ACAE41EF@linux.ibm.com Fixes: 27f58c04a8f4 ("scsi: sg: Avoid sg device teardown race") Cc: stable@vger.kernel.org Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20240401191038.18359-1-Alexander@wetzel-home.de Tested-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-01scsi: libsas: Align SMP request allocation to ARCH_DMA_MINALIGNYihang Li
This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes (from 128). In libsas, this will cause SMP requests to be 8-byte aligned through kmalloc() allocation. However, for hisi_sas hardware, all command addresses must be 16-byte-aligned. Otherwise, the commands fail to be executed. ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request. Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com [1] Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20240328090626.621147-1-liyihang9@huawei.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-01scsi: sd: Unregister device if device_add_disk() failed in sd_probe()Li Nan
"if device_add() succeeds, you should call device_del() when you want to get rid of it." In sd_probe(), device_add_disk() fails when device_add() has already succeeded, so change put_device() to device_unregister() to ensure device resources are released. Fixes: 2a7a891f4c40 ("scsi: sd: Add error handling support for add_disk()") Signed-off-by: Li Nan <linan122@huawei.com> Link: https://lore.kernel.org/r/20231208082335.1754205-1-linan666@huaweicloud.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-04-01scsi: mylex: Fix sysfs buffer lengthsArnd Bergmann
The myrb and myrs drivers use an odd way of implementing their sysfs files, calling snprintf() with a fixed length of 32 bytes to print into a page sized buffer. One of the strings is actually longer than 32 bytes, which clang can warn about: drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation] drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation] These could all be plain sprintf() without a length as the buffer is always long enough. On the other hand, sysfs files should not be overly long either, so just double the length to make sure the longest strings don't get truncated here. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240326223825.4084412-8-arnd@kernel.org Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: bnx2fc: Remove spin_lock_bh while releasing resources after uploadSaurav Kashyap
The session resources are used by FW and driver when session is offloaded, once session is uploaded these resources are not used. The lock is not required as these fields won't be used any longer. The offload and upload calls are sequential, hence lock is not required. This will suppress following BUG_ON(): [ 449.843143] ------------[ cut here ]------------ [ 449.848302] kernel BUG at mm/vmalloc.c:2727! [ 449.853072] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 449.858712] CPU: 5 PID: 1996 Comm: kworker/u24:2 Not tainted 5.14.0-118.el9.x86_64 #1 Rebooting. [ 449.867454] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.3.4 11/08/2016 [ 449.876966] Workqueue: fc_rport_eq fc_rport_work [libfc] [ 449.882910] RIP: 0010:vunmap+0x2e/0x30 [ 449.887098] Code: 00 65 8b 05 14 a2 f0 4a a9 00 ff ff 00 75 1b 55 48 89 fd e8 34 36 79 00 48 85 ed 74 0b 48 89 ef 31 f6 5d e9 14 fc ff ff 5d c3 <0f> 0b 0f 1f 44 00 00 41 57 41 56 49 89 ce 41 55 49 89 fd 41 54 41 [ 449.908054] RSP: 0018:ffffb83d878b3d68 EFLAGS: 00010206 [ 449.913887] RAX: 0000000080000201 RBX: ffff8f4355133550 RCX: 000000000d400005 [ 449.921843] RDX: 0000000000000001 RSI: 0000000000001000 RDI: ffffb83da53f5000 [ 449.929808] RBP: ffff8f4ac6675800 R08: ffffb83d878b3d30 R09: 00000000000efbdf [ 449.937774] R10: 0000000000000003 R11: ffff8f434573e000 R12: 0000000000001000 [ 449.945736] R13: 0000000000001000 R14: ffffb83da53f5000 R15: ffff8f43d4ea3ae0 [ 449.953701] FS: 0000000000000000(0000) GS:ffff8f529fc80000(0000) knlGS:0000000000000000 [ 449.962732] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 449.969138] CR2: 00007f8cf993e150 CR3: 0000000efbe10003 CR4: 00000000003706e0 [ 449.977102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 449.985065] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 449.993028] Call Trace: [ 449.995756] __iommu_dma_free+0x96/0x100 [ 450.000139] bnx2fc_free_session_resc+0x67/0x240 [bnx2fc] [ 450.006171] bnx2fc_upload_session+0xce/0x100 [bnx2fc] [ 450.011910] bnx2fc_rport_event_handler+0x9f/0x240 [bnx2fc] [ 450.018136] fc_rport_work+0x103/0x5b0 [libfc] [ 450.023103] process_one_work+0x1e8/0x3c0 [ 450.027581] worker_thread+0x50/0x3b0 [ 450.031669] ? rescuer_thread+0x370/0x370 [ 450.036143] kthread+0x149/0x170 [ 450.039744] ? set_kthread_struct+0x40/0x40 [ 450.044411] ret_from_fork+0x22/0x30 [ 450.048404] Modules linked in: vfat msdos fat xfs nfs_layout_nfsv41_files rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver dm_service_time qedf qed crc8 bnx2fc libfcoe libfc scsi_transport_fc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp dcdbas rapl intel_cstate intel_uncore mei_me pcspkr mei ipmi_ssif lpc_ich ipmi_si fuse zram ext4 mbcache jbd2 loop nfsv3 nfs_acl nfs lockd grace fscache netfs irdma ice sd_mod t10_pi sg ib_uverbs ib_core 8021q garp mrp stp llc mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi fb_sys_fops cec crct10dif_pclmul ahci crc32_pclmul bnx2x drm ghash_clmulni_intel libahci rfkill i40e libata megaraid_sas mdio wmi sunrpc lrw dm_crypt dm_round_robin dm_multipath dm_snapshot dm_bufio dm_mirror dm_region_hash dm_log dm_zero dm_mod linear raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid6_pq libcrc32c crc32c_intel raid1 raid0 iscsi_ibft squashfs be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls [ 450.048497] libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi edd ipmi_devintf ipmi_msghandler [ 450.159753] ---[ end trace 712de2c57c64abc8 ]--- Reported-by: Guangwu Zhang <guazhang@redhat.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20240315071427.31842-1-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: core: Fix unremoved procfs host directory regressionGuilherme G. Piccoli
Commit fc663711b944 ("scsi: core: Remove the /proc/scsi/${proc_name} directory earlier") fixed a bug related to modules loading/unloading, by adding a call to scsi_proc_hostdir_rm() on scsi_remove_host(). But that led to a potential duplicate call to the hostdir_rm() routine, since it's also called from scsi_host_dev_release(). That triggered a regression report, which was then fixed by commit be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression"). The fix just dropped the hostdir_rm() call from dev_release(). But it happens that this proc directory is created on scsi_host_alloc(), and that function "pairs" with scsi_host_dev_release(), while scsi_remove_host() pairs with scsi_add_host(). In other words, it seems the reason for removing the proc directory on dev_release() was meant to cover cases in which a SCSI host structure was allocated, but the call to scsi_add_host() didn't happen. And that pattern happens to exist in some error paths, for example. Syzkaller causes that by using USB raw gadget device, error'ing on usb-storage driver, at usb_stor_probe2(). By checking that path, we can see that the BadDevice label leads to a scsi_host_put() after a SCSI host allocation, but there's no call to scsi_add_host() in such path. That leads to messages like this in dmesg (and a leak of the SCSI host proc structure): usb-storage 4-1:87.51: USB Mass Storage device detected proc_dir_entry 'scsi/usb-storage' already registered WARNING: CPU: 1 PID: 3519 at fs/proc/generic.c:377 proc_register+0x347/0x4e0 fs/proc/generic.c:376 The proper fix seems to still call scsi_proc_hostdir_rm() on dev_release(), but guard that with the state check for SHOST_CREATED; there is even a comment in scsi_host_dev_release() detailing that: such conditional is meant for cases where the SCSI host was allocated but there was no calls to {add,remove}_host(), like the usb-storage case. This is what we propose here and with that, the error path of usb-storage does not trigger the warning anymore. Reported-by: syzbot+c645abf505ed21f931b5@syzkaller.appspotmail.com Fixes: be03df3d4bfe ("scsi: core: Fix a procfs host directory removal regression") Cc: stable@vger.kernel.org Cc: Bart Van Assche <bvanassche@acm.org> Cc: John Garry <john.g.garry@oracle.com> Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Link: https://lore.kernel.org/r/20240313113006.2834799-1-gpiccoli@igalia.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: mpi3mr: Avoid memcpy field-spanning write WARNINGShin'ichiro Kawasaki
When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver prints this WARNING message: memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1) WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr] The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8 replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended to be a flexible length array, so the WARN is a false positive. To suppress the WARN, remove the constant number '1' from the array declaration and clarify that it has flexible length. Also, adjust the memory allocation size to match the change. Suggested-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240323084155.166835-1-shinichiro.kawasaki@wdc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: sd: Fix TCG OPAL unlock on system resumeDamien Le Moal
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") introduced the manage_system_start_stop scsi_device flag to allow libata to indicate to the SCSI disk driver that nothing should be done when resuming a disk on system resume. This change turned the execution of sd_resume() into a no-op for ATA devices on system resume. While this solved deadlock issues during device resume, this change also wrongly removed the execution of opal_unlock_from_suspend(). As a result, devices with TCG OPAL locking enabled remain locked and inaccessible after a system resume from sleep. To fix this issue, introduce the SCSI driver resume method and implement it with the sd_resume() function calling opal_unlock_from_suspend(). The former sd_resume() function is renamed to sd_resume_common() and modified to call the new sd_resume() function. For non-ATA devices, this result in no functional changes. In order for libata to explicitly execute sd_resume() when a device is resumed during system restart, the function scsi_resume_device() is introduced. libata calls this function from the revalidation work executed on devie resume, a state that is indicated with the new device flag ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked on resume, allowing normal operation. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538 Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25scsi: sg: Avoid sg device teardown raceAlexander Wetzel
sg_remove_sfp_usercontext() must not use sg_device_destroy() after calling scsi_device_put(). sg_device_destroy() is accessing the parent scsi_device request_queue which will already be set to NULL when the preceding call to scsi_device_put() removed the last reference to the parent scsi_device. The resulting NULL pointer exception will then crash the kernel. Link: https://lore.kernel.org/r/20240305150509.23896-1-Alexander@wetzel-home.de Fixes: db59133e9279 ("scsi: sg: fix blktrace debugfs entries leakage") Cc: stable@vger.kernel.org Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20240320213032.18221-1-Alexander@wetzel-home.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25Merge branch '6.9/scsi-queue' into 6.9/scsi-fixesMartin K. Petersen
Pull in the outstanding updates from the 6.9/scsi-queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "The vfs has long had a write lifetime hint mechanism that gives the expected longevity on storage of the data being written. f2fs was the original consumer of this and used the hint for flash data placement (mostly to avoid write amplification by placing objects with similar lifetimes in the same erase block). More recently the SCSI based UFS (Universal Flash Storage) drivers have wanted to take advantage of this as well, for the same reasons as f2fs, necessitating plumbing the write hints through the block layer and then adding it to the SCSI core. The vfs write_hints already taken plumbs this as far as block and this completes the SCSI core enabling based on a recently agreed reuse of the old write command group number. The additions to the scsi_debug driver are for emulating this property so we can run tests on it in the absence of an actual UFS device" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Maintain write statistics per group number scsi: scsi_debug: Implement GET STREAM STATUS scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page scsi: scsi_debug: Allocate the MODE SENSE response from the heap scsi: scsi_debug: Rework subpage code error handling scsi: scsi_debug: Rework page code error handling scsi: scsi_debug: Support the block limits extension VPD page scsi: scsi_debug: Reduce code duplication scsi: sd: Translate data lifetime information scsi: scsi_proto: Add structures and constants related to I/O groups and streams scsi: core: Query the Block Limits Extension VPD page
2024-03-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Only a couple of driver updates this time (lpfc and mpt3sas) plus the usual assorted minor fixes and updates. The major core update is a set of patches moving retries out of the drivers and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits) scsi: core: Constify the struct device_type usage scsi: libfc: replace deprecated strncpy() with memcpy() scsi: lpfc: Replace deprecated strncpy() with strscpy() scsi: bfa: Fix function pointer type mismatch for state machines scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn scsi: bfa: Remove additional unnecessary struct declarations scsi: csiostor: Avoid function pointer casts scsi: qla1280: Remove redundant assignment to variable 'mr' scsi: core: Make scsi_bus_type const scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST scsi: target: tcm_loop: Make tcm_loop_lld_bus const scsi: scsi_debug: Make pseudo_lld_bus const scsi: iscsi: Make iscsi_flashnode_bus const scsi: fcoe: Make fcoe_bus_type const scsi: lpfc: Copyright updates for 14.4.0.0 patches scsi: lpfc: Update lpfc version to 14.4.0.0 scsi: lpfc: Change lpfc_vport load_flag member into a bitmask scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock scsi: lpfc: Change nlp state statistic counters into atomic_t ...
2024-03-15Merge tag 'powerpc-6.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use by glibc - Add support for recognising the Power11 architected and raw PVRs - Add support for nr_cpus=n on the command line where the boot CPU is >= n - Add ppcxx_allmodconfig targets for all 32-bit sub-arches - Other small features, cleanups and fixes Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan, Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor, Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B. Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe Kleine-König, Vaibhav Jain, and Wen Xiong. * tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits) powerpc/macio: Make remove callback of macio driver void returned powerpc/83xx: Fix build failure with FPU=n powerpc/64s: Fix get_hugepd_cache_index() build failure powerpc/4xx: Fix warp_gpio_leds build failure powerpc/amigaone: Make several functions static powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc. macintosh/adb: make adb_dev_class constant powerpc: xor_vmx: Add '-mhard-float' to CFLAGS powerpc/fsl: Fix mfpmr() asm constraint error powerpc: Remove cpu-as-y completely powerpc/fsl: Modernise mt/mfpmr powerpc/fsl: Fix mfpmr build errors with newer binutils powerpc/64s: Use .machine power4 around dcbt powerpc/64s: Move dcbt/dcbtst sequence into a macro powerpc/mm: Code cleanup for __hash_page_thp powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks powerpc/irq: Allow softirq to hardirq stack transition powerpc: Stop using of_root powerpc/machdep: Define 'compatibles' property in ppc_md and use it of: Reimplement of_machine_is_compatible() using of_machine_compatible_match() ...
2024-03-14Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ...
2024-03-11Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - MD pull requests via Song: - Cleanup redundant checks (Yu Kuai) - Remove deprecated headers (Marc Zyngier, Song Liu) - Concurrency fixes (Li Lingfeng) - Memory leak fix (Li Nan) - Refactor raid1 read_balance (Yu Kuai, Paul Luse) - Clean up and fix for md_ioctl (Li Nan) - Other small fixes (Gui-Dong Han, Heming Zhao) - MD atomic limits (Christoph) - NVMe pull request via Keith: - RDMA target enhancements (Max) - Fabrics fixes (Max, Guixin, Hannes) - Atomic queue_limits usage (Christoph) - Const use for class_register (Ricardo) - Identification error handling fixes (Shin'ichiro, Keith) - Improvement and cleanup for cached request handling (Christoph) - Moving towards atomic queue limits. Core changes and driver bits so far (Christoph) - Fix UAF issues in aoeblk (Chun-Yi) - Zoned fix and cleanups (Damien) - s390 dasd cleanups and fixes (Jan, Miroslav) - Block issue timestamp caching (me) - noio scope guarding for zoned IO (Johannes) - block/nvme PI improvements (Kanchan) - Ability to terminate long running discard loop (Keith) - bdev revalidation fix (Li) - Get rid of old nr_queues hack for kdump kernels (Ming) - Support for async deletion of ublk (Ming) - Improve IRQ bio recycling (Pavel) - Factor in CPU capacity for remote vs local completion (Qais) - Add shared_tags configfs entry for null_blk (Shin'ichiro - Fix for a regression in page refcounts introduced by the folio unification (Tony) - Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid, Ricardo, Roman, Tang, Uwe) * tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits) block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC block/swim: Convert to platform remove callback returning void cdrom: gdrom: Convert to platform remove callback returning void block: remove disk_stack_limits md: remove mddev->queue md: don't initialize queue limits md/raid10: use the atomic queue limit update APIs md/raid5: use the atomic queue limit update APIs md/raid1: use the atomic queue limit update APIs md/raid0: use the atomic queue limit update APIs md: add queue limit helpers md: add a mddev_is_dm helper md: add a mddev_add_trace_msg helper md: add a mddev_trace_remap helper bcache: move calculation of stripe_size and io_opt into bcache_device_init virtio_blk: Do not use disk_set_max_open/active_zones() aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts block: move capacity validation to blkpg_do_ioctl() block: prevent division by zero in blk_rq_stat_sum() drbd: atomically update queue limits in drbd_reconsider_queue_parameters ...
2024-03-10Merge patch series "Update lpfc to revision 14.4.0.1"Martin K. Petersen
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.4.0.1 This patch set contains updates to log messaging, bug fixes related to unregistration, interrupt handling, resource recovery, and clean up patches regarding the abuse of hbalock and void pointers in the driver. The patches were cut against Martin's 6.9/scsi-queue tree. Link: https://lore.kernel.org/r/20240305200503.57317-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10Merge patch series "qla2xxx misc. bug fixes"Martin K. Petersen
Nilesh Javali <njavali@marvell.com> says: Please apply the qla2xxx driver miscellaneous bug fixes to the scsi tree at your earliest convenience. Link: https://lore.kernel.org/r/20240227164127.36465-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Copyright updates for 14.4.0.1 patchesJustin Tee
Update copyrights to 2024 for files modified in the 14.4.0.1 patch set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-13-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Update lpfc version to 14.4.0.1Justin Tee
Update lpfc version to 14.4.0.1 Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-12-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Define types in a union for generic void *context3 ptrJustin Tee
In LPFC_MBOXQ_t, the void *context3 ptr is used for various paths. It is treated as a generic pointer, and is type casted during its usage. The issue with this is that it can sometimes get confusing when reading code as to what the context3 ptr is being used for and mistakenly be reused in a different context. Rename context3 to ctx_u, and declare it as a union of defined ptr types. From now on, the ctx_u ptr may be used only if users define the use case type. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-11-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptrJustin Tee
In LPFC_MBOXQ_t, the ctx_buf ptr shouldn't be defined as a generic void *ptr. It is named ctx_buf and it should only be used as an lpfc_dmabuf *ptr. Due to the void* declaration, there have been abuses of ctx_buf for things not related to lpfc_dmabuf. So, set the ptr type for *ctx_buf as lpfc_dmabuf. Remove all type casts on ctx_buf because it is no longer a void *ptr. Convert the abuse of ctx_buf for something not related to lpfc_dmabuf to use the void *context3 ptr. A particular abuse of the ctx_buf warranted a new void *ext_buf ptr. However, the usage of this new void *ext_buf is not generic. It is intended to only hold virtual addresses for extended mailbox commands. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-10-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-10scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptrJustin Tee
In LPFC_MBOXQ_t data structure, the ctx_ndlp ptr shouldn't be defined as a generic void *ptr. It is named ctx_ndlp and it should only be used as an lpfc_nodelist *ptr. Due to the void* declaration, there have been abuses of ctx_ndlp for things not related to ndlp. So, set the ptr type for *ctx_ndlp as lpfc_nodelist. Remove all type casts on ctx_ndlp because it is no longer a void *ptr. Convert the abuse of ctx_ndlp for things not related to ndlps to use the void *context3 ptr. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-06 21:03:06 +0000