| Age | Commit message (Collapse) | Author |
|---|
|
commit 2d85ecd6fb0eb2fee0ffa040ec1ddea57b09bc38 upstream.
The datasheet specifies, that the IRQ_B pin is pulled low when any
unmasked interrupt bit status is changed, and it is released high once
the application processor reads the INT1 register. As it specifies a
level-low behavior, it should not force a falling-edge interrupt.
Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt
and instead rely on the flag from the device tree.
Fixes: 0959b6706325 ("regulator: pf9453: add PMIC PF9453 support")
Cc: stable@vger.kernel.org
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Link: https://patch.msgid.link/20260218102518.238943-2-fra.schnyder@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 21b3fb7dc19caa488d285e3c47999f7f1a179334 ]
An incorrect device name was logged for PCA9452 because the dev_info()
ternary omitted PCA9452 and fell through to "pca9450bc". Introduce a
type_name and set it per device type so the probed message matches the
actual PMIC. While here, make the PCA9451A case explicit.
No functional changes.
Fixes: 017b76fb8e5b6 ("regulator: pca9450: Add PMIC pca9452 support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-2-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d0efaf47ee90ac60efae790acee3a3ed99ebf80 ]
Kernel warning on i.MX8MP-EVK when doing module test:
irq: type mismatch, failed to map hwirq-3 for gpio@30200000!
Per PCA945[X] specification: The IRQ_B pin is pulled low when any unmasked
interrupt bit status is changed and it is released high once application
processor read INT1 register.
So the interrupt should be configured as IRQF_TRIGGER_LOW, not
IRQF_TRIGGER_FALLING.
Fixes: 0935ff5f1f0a4 ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20260310-pca9450-irq-v1-1-36adf52c2c55@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 23942b71f07cc99e39d9216a5b370df494759d8c ]
In mt6363_regulator_probe(), devm_add_action_or_reset() is used to
automatically dispose of the IRQ mapping if the probe fails or the
device is removed.
The manual call to irq_dispose_mapping() in the error path was redundant
as the reset action already triggers mt6363_irq_remove(). Furthermore,
the manual call incorrectly passed the hardware IRQ number (info->hwirq)
instead of the virtual IRQ mapping (info->virq).
Remove the redundant and incorrect manual disposal.
Fixes: 3c36965df808 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260223-mt6363-v1-1-c99a2e8ac621@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
bq257xx_reg_dt_parse_gpio()
[ Upstream commit 4baaddaa44af01cd4ce239493060738fd0881835 ]
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.
Fixes: 981dd162b635 ("regulator: bq257xx: Add bq257xx boost regulator driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-bq257-v1-1-8ebbc731c1c3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0902010c8d163f7b62e655efda1a843529152c7c ]
In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224-fp9931-v1-1-1cf05cabef4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e243cdd87b911ce9968b62e4ab2b680dfadc4341 ]
When creating the regulator object, associated with a consumer device,
the supply_name is string formatted into a statically sized buffer on
the stack, then strdup()'ed onto the heap.
Not only is the dance on the stack unnecessary, but when the device's
name is long we might not fit the constructed supply_name in the fixed
64 byte buffer on the stack.
One such case can be seen on the Qualcomm Rb3Gen2 board, where we find a
PCIe controller, with a PCIe switch, with a USB controller, with a USB
hub, consuming a regulator. In this example the dev->kobj.name itself is
62 characters long.
Drop the temporary buffer on the stack and kasprintf() the string
directly on the heap, both to simplify the code, and to remove the
length limitation.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patch.msgid.link/20260211-regulator-supply-name-length-v1-1-3875541c1576@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a4b0c999101b2532723f9bd9818b70ffa7580f4 ]
Sometimes, the mt6363 regulator would fail to initialize and return with
a TIMEOUT error, so add an extra instruction to wake up the bus before
issuing the commands.
Fixes: 3c36965df808 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://patch.msgid.link/20260210053708.17239-4-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e23c0a59dabae9166bbea26fc05d08e7d9e900b7 ]
Receiving and forwarding critical supply events seems like they're
important information and we shouldn't ignore errors occurring during
registration for such events.
With this change the supply is unset on event registration failure,
allowing us to potentially retry another time.
Fixes: 433e294c3c5b ("regulator: core: forward undervoltage events downstream by default")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-6-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86a8eeb0e913f4b6a55dabba5122098d4e805e55 ]
Since commit 98e48cd9283d ("regulator: core: resolve supply for
boot-on/always-on regulators"), set_machine_constraints() can return
-EPROBE_DEFER very late, after it has done a lot of work and
configuration of the regulator.
This means that configuration will happen multiple times for no
benefit in that case. Furthermore, this can lead to timing-dependent
voltage glitches as mentioned e.g. in commit 8a866d527ac0 ("regulator:
core: Resolve supply name earlier to prevent double-init").
We can know that it's going to fail very early, in particular before
going through the complete regulator configuration by moving some code
around a little.
Do so to avoid re-configuring the regulator multiple times, also
avoiding the voltage glitches if we can.
Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-3-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 497330b203d2c59c5ff3fa4c34d14494d7203bc3 ]
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
Fixes: 36a1f1b6ddc6 ("regulator: core: Fix memory leak in regulator_resolve_supply()")
Fixes: 8e5356a73604 ("regulator: core: Clear the supply pointer if enabling fails")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Higher voltage settings were unusable due to incorrect n_voltages values
causing registration failures. For example, setting aldo4 to 3.3V failed
with -EINVAL because the required selector (123) exceeded the allowed
range (n_voltages=117).
Fix by aligning n_voltages with the hardware register widths per the P1
datasheet [1]:
- BUCK: 255 (was 254), allows selectors 0-254, selector 255 is reserved
- LDO: 128 (was 117), allows selectors 0-127, selectors 0-10 are for
suspend mode, valid operational range is 11-127
This enables the full voltage range supported by the hardware.
Fixes: 8b84d712ad84 ("regulator: spacemit: support SpacemiT P1 regulators")
Link: https://developer.spacemit.com/documentation [1]
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260122-spacemit-p1-v1-1-309be27fbff9@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a check for devm_kzalloc failure in fp9931_probe to prevent a
null pointer dereference.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://patch.msgid.link/tencent_5FCF2108621C51007E5526A7C60A5CC1F306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sync the driver with the binding. During review process a regulators
subnode was requested but neither driver nor test setup was updated.
Fixes: 12d821bd13d4 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251223-fp9931-fix-v1-1-b19b4c1e7056@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes that came in during the merge window, nothing too
exciting - the one core fix improves error propagation from gpiolib
which hopefully shouldn't actually happen but is safer"
* tag 'regulator-fix-v6.19-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit: Align input supply name with the DT binding
regulator: fixed: Rely on the core freeing the enable GPIO
regulator: check the return value of gpiod_set_value_cansleep()
|
|
The Device Tree binding schema for the SpacemiT P1 PMIC defines the main
input supply property as "vin-supply", but the driver defines the supply
name for BUCK and ALDO regulators as "vcc".
This causes the regulator core to lookup for a non-existent "vcc-supply".
Rename the supply from "vcc" to "vin", to match the DT binding and ensure
that the regulators input supplies are correctly resolved.
After this change, the regulators supply hierarchy is correctly reported:
$ cat /sys/kernel/debug/regulator/regulator_summary
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 1 0 0 unknown 0mV 0mA 0mV 0mV
dc_in_12v 2 1 0 unknown 12000mV 0mA 12000mV 12000mV
vcc_4v 7 10 0 unknown 4000mV 0mA 4000mV 4000mV
buck1 1 0 0 unknown 1050mV 0mA 500mV 3425mV
buck2 1 0 0 unknown 900mV 0mA 500mV 3425mV
buck3 1 0 0 unknown 1800mV 0mA 500mV 1800mV
buck4 1 0 0 unknown 3300mV 0mA 500mV 3300mV
buck5 3 7 0 unknown 2100mV 0mA 500mV 3425mV
dldo1 0 0 0 unknown 1200mV 0mA 500mV 3125mV
dldo2 0 0 0 unknown 500mV 0mA 500mV 3125mV
dldo3 0 0 0 unknown 500mV 0mA 500mV 3125mV
dldo4 1 0 0 unknown 1800mV 0mA 500mV 3125mV
dldo5 0 0 0 unknown 500mV 0mA 500mV 3125mV
dldo6 1 0 0 unknown 1800mV 0mA 500mV 3125mV
dldo7 0 0 0 unknown 500mV 0mA 500mV 3125mV
buck6 1 0 0 unknown 1100mV 0mA 500mV 3425mV
aldo1 0 0 0 unknown 1800mV 0mA 500mV 3125mV
aldo2 0 0 0 unknown 500mV 0mA 500mV 3125mV
aldo3 0 0 0 unknown 500mV 0mA 500mV 3125mV
aldo4 0 0 0 unknown 500mV 0mA 500mV 3125mV
Fixes: 8b84d712ad84 ("regulator: spacemit: support SpacemiT P1 regulators")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20251206133852.1739475-1-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to simplify ownership rules for enable GPIOs supplied by drivers
regulator_register() always takes ownership of them, even if it ends up
failing for some other reason. We therefore should not free the GPIO if
registration fails but just let the core worry about things.
Fixes: 636f4618b1cd (regulator: fixed: fix GPIO descriptor leak on register failure)
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://lore.kernel.org/r/DEPEYUF5BRGY.UKFBWRRE8HNP@cknow-tech.com
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251204-regulator-fixed-fix-gpiod-leak-v1-1-48efea5b82c2@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
gpiod_set_value_cansleep() now returns an integer and can indicate
failures in the GPIO layer. Propagate any potential errors to regulator
core.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203084737.15891-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a spelling mistake in a dev_err_probe message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20251128173330.318309-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c3785f ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LDO2 judgement bit position should be 7, not 6.
Cc: stable@vger.kernel.org
Reported-by: Yoon Dong Min <dm.youn@telechips.com>
Fixes: b65439d90150 ("regulator: rtq2208: Fix the LDO DVS capability")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/faadb009f84b88bfcabe39fc5009c7357b00bbe2.1764209258.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct buck group2 H and F mapping logic.
Cc: stable@vger.kernel.org
Reported-by: Yoon Dong Min <dm.youn@telechips.com>
Fixes: 1742e7e978ba ("regulator: rtq2208: Fix incorrect buck converter phase mapping")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/8527ae02a72b754d89b7580a5fe7474d6f80f5c3.1764209258.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>:
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Some drivers already have const everywhere, so container_of_const can be
directly used. In few other drivers, the final pointer can be constified
that way.
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-8-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-7-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-6-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-5-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-4-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-3-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pointer to 'struct regulator_desc' is a pointer to const and the
wrapping structure (container) is not being modified, thus entire syntax
can be replaced to preferred and safer container_of_const().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-2-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use container_of_const(), which is preferred over container_of(), when
the argument 'ptr' and returned pointer are already const, for better
code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126-container-of-const-regulator-v1-1-eeec378144d4@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Andreas Kemnade <andreas@kemnade.info>:
Add a driver for the FP9931/JD9930 regulator which provides the
comparatively high voltages needed for electronic paper displays.
Datasheet for the FP9931 is at
https://www.fitipower.com/dl/file/flXa6hIchVeu0W3K
Although it is in English, it seems to be only downloadable
from the Chinese part of that website.
For the JD9930 there can be a datasheet found at
https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/196/JD9930_2D00_0.7_2D00_JUN_2D00_2019.pdf
To simplify things, include the hwmon part directly which is only
one register read and there are not other functions besides
regulators in this chip.
|
|
Return "PTR_ERR(pca9450->sd_vsel_gpio)" instead of "ret". The "ret"
variable is success at this point.
Fixes: 3ce6f4f943dd ("regulator: pca9450: Fix control register for LDO5")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSBqnPoBrsNB1Ale@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106145003.245866-1-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for the FP9931/JD9930 regulator. Implement handling of the PG
(power good), TS_EN (temperature sensor enable), and EN (enable regulators)
pins. Implement the pair of symmetric LDOs as a single regulator because
they share a single voltage set register. For simplicity, just add the
temperature sensor (depending on external NTC) directly.
Limitations:
- As these regulators are controlled together with the VCOM regulator via
the EN pin, some kind of management must be in place. As the enable op
is not called when the regulator is already enabled, simple refcounting
seems not to work to avoid clearing EN when one regulator is still
enabled. As these regulators are typically used together, this
limitation should not hurt hard, just provide the is_enabled op.
- As the VCOM step is quite odd (5V/255 steps), rounding is needed.
Due to some limitations in the regulator core, the max/min voltages in
the devicetree must match the idea of the driver how to round things
exactly.
- Night mode is not implemented, so only the FP9931 compatible is needed in
the driver, there is no REGULATOR_MODE_NIGHT and no clear definition in
the datasheet what it does, also the XON pin which seems to be an input
related to that night mode is not used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251115-fp9931-submit-v3-3-92f5d0772b68@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
Problem statement: GPIOs are implemented as a strictly exclusive
resource in the kernel but there are lots of platforms on which single
pin is shared by multiple devices which don't communicate so need some
way of properly sharing access to a GPIO. What we have now is the
GPIOD_FLAGS_BIT_NONEXCLUSIVE flag which was introduced as a hack and
doesn't do any locking or arbitration of access - it literally just hand
the same GPIO descriptor to all interested users.
The proposed solution is composed of three major parts: the high-level,
shared GPIO proxy driver that arbitrates access to the shared pin and
exposes a regular GPIO chip interface to consumers, a low-level shared
GPIOLIB module that scans firmware nodes and creates auxiliary devices
that attach to the proxy driver and finally a set of core GPIOLIB
changes that plug the former into the GPIO lookup path.
The changes are implemented in a way that allows to seamlessly compile
out any code related to sharing GPIOs for systems that don't need it.
The practical use-case for this are the powerdown GPIOs shared by
speakers on Qualcomm db845c platform, however I have also extensively
tested it using gpio-virtuser on arm64 qemu with various DT
configurations.
|
|
GPIOLIB is now aware of shared GPIOs and - for platforms where access to
such pins is managed internally - we don't need to keep track of the
enable count.
Once all users in the kernel switch to using the new mechanism, we'll be
able to drop the internal counting of users from the regulator code.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-10-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unused included headers. This makes the code simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251117103205.4038600-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20251117202215.1936139-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
This patch-set convert many functions to snd_soc_dapm_xxx().
This is preparation to move struct snd_soc_dapm_context into soc-dapm.c.
For backport easy, this patch-set is added for each drivers.
|
|
This patch converts below functions.
dapm->dev -> snd_soc_dapm_to_dev()
dapm->card -> snd_soc_dapm_to_card()
dapm->component -> snd_soc_dapm_to_component()
dapm_kcontrol_get_value() -> snd_soc_dapm_kcontrol_get_value()
snd_soc_component_enable_pin() -> snd_soc_dapm_enable_pin()
snd_soc_component_enable_pin_unlocked() -> snd_soc_dapm_enable_pin_unlocked()
snd_soc_component_disable_pin() -> snd_soc_dapm_disable_pin()
snd_soc_component_disable_pin_unlocked() -> snd_soc_dapm_disable_pin_unlocked()
snd_soc_component_nc_pin() -> snd_soc_dapm_nc_pin()
snd_soc_component_nc_pin_unlocked() -> snd_soc_dapm_nc_pin_unlocked()
snd_soc_component_get_pin_status() -> snd_soc_dapm_get_pin_status()
snd_soc_component_force_enable_pin() -> snd_soc_dapm_force_enable_pin()
snd_soc_component_force_enable_pin_unlocked() -> snd_soc_dapm_force_enable_pin_unlocked()
snd_soc_component_force_bias_level() -> snd_soc_dapm_force_bias_level()
snd_soc_component_get_bias_level() -> snd_soc_dapm_get_bias_level()
snd_soc_component_init_bias_level() -> snd_soc_dapm_init_bias_level()
snd_soc_component_get_dapm() -> snd_soc_component_to_dapm()
snd_soc_dapm_kcontrol_component() -> snd_soc_dapm_kcontrol_to_component()
snd_soc_dapm_kcontrol_widget() -> snd_soc_dapm_kcontrol_to_widget()
snd_soc_dapm_kcontrol_dapm() -> snd_soc_dapm_kcontrol_to_dapm()
snd_soc_dapm_np_pin() -> snd_soc_dapm_disable_pin()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/87a50ta0df.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For 'always-on' and 'boot-on' regulators, the set_machine_constraints()
may enable supply before enabling the main regulator, however if the
latter fails, the function returns with an error but the supply remains
enabled.
When this happens, the regulator_register() function continues on the
error path where it puts the supply regulator. Since enabling the supply
is not balanced with a disable call, a warning similar to the following
gets issued from _regulator_put():
[ 1.603889] WARNING: CPU: 2 PID: 44 at _regulator_put+0x8c/0xa0
[ 1.603908] Modules linked in:
[ 1.603926] CPU: 2 UID: 0 PID: 44 Comm: kworker/u16:3 Not tainted 6.18.0-rc4 #0 NONE
[ 1.603938] Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7 (DT)
[ 1.603945] Workqueue: async async_run_entry_fn
[ 1.603958] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.603967] pc : _regulator_put+0x8c/0xa0
[ 1.603976] lr : _regulator_put+0x7c/0xa0
...
[ 1.604140] Call trace:
[ 1.604145] _regulator_put+0x8c/0xa0 (P)
[ 1.604156] regulator_register+0x2ec/0xbf0
[ 1.604166] devm_regulator_register+0x60/0xb0
[ 1.604178] rpm_reg_probe+0x120/0x208
[ 1.604187] platform_probe+0x64/0xa8
...
In order to avoid this, change the set_machine_constraints() function to
disable the supply if enabling the main regulator fails.
Fixes: 05f224ca6693 ("regulator: core: Clean enabling always-on regulators + their supplies")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20251107-regulator-disable-supply-v1-1-c95f0536f1b5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20251107085109.2316999-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106142914.227875-1-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The validator is not happy:
Warning: drivers/regulator/pf9453-regulator.c:303 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Update the kernel-doc accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106114628.2302762-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
This series adds support for three new MediaTek PMICs: MT6316, MT6363
and MT6373 and their variants - used in board designs featuring the
MediaTek MT8196 Chromebook SoC, or the MT6991 Dimensity 9400 Smartphone
SoC.
In particular, MT6316 is a regulator, but the MT6363 and MT6373 PMICs
are multi-function devices, as they have and expose multiple sub-devices;
moreover, some of those also contain an interrupt controller, managing
internal IPs interrupts: for those, a chained interrupt handler is
registered, which parent is the SPMI controller itself.
This series adds support for all of the MT6316 regulator variants and
for MT6363, MT6373 SPMI PMICs and their interrupt controller.
|
|
Add a driver for the regulators found on the MT6363 PMIC, fully
controlled by SPMI interface.
This PMIC regulates voltage with an input range of 2.6-5.0V, and
features 10 buck converters and 26 LDOs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for the regulators found on all types of the MediaTek
MT6316 SPMI PMIC, fully controlled by SPMI interface and featuring
four step down DCDC (buck) converters.
In particular, this includes support for:
- MT6316(BP/VP): 2+2 Phase (Phase 1: buck1+2, Phase 2: buck3+4)
- MT6316(CP/HP/KP): 3+1 Phase (Phase 1: buck1+2+4, Phase 2: buck3)
- MT6316(DP/TP): 4+0 Phase (Single phase, buck1+2+3+4)
Please note that the set/clear registers for the enable bits are
not documented in the datasheet version that I used as reference,
but those are used in the downstream driver and I verified that
are actually working as expected.
Besides, it's also worth clearly mentioning that the MT6316 PMICs
voltage selector register uses a weird 9-bits Big Endian format,
for which a driver-private helper is provided.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
