summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2025-05-26Merge branches 'acpi-resource', 'acpi-pm', 'acpi-platform-profile' and ↵Rafael J. Wysocki
'acpi-docs' Merge an ACPI resources management update, ACPI power management updates, an ACPI platform profile driver fix and an ACPI documentation update related to device properties for 6.16-rc1: - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong Bai). - Add an LPS0 check() callback to the AMD pinctrl driver and fix up config symbol dependencies in it (Mario Limonciello, Rafael Wysocki). - Avoid initializing the ACPI platform profile driver on non-ACPI platforms (Alexandre Ghiti). - Document that references to ACPI data (non-device) nodes should use string-only references in hierarchical data node packages (Sakari Ailus). * acpi-resource: ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[] * acpi-pm: pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops' pinctrl: amd: Add an LPS0 check() callback ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case * acpi-platform-profile: ACPI: platform_profile: Avoid initializing on non-ACPI platforms * acpi-docs: Documentation: ACPI: Use all-string data node references
2025-05-21pinctrl: freescale: Add support for imx943 pinctrlJacky Bai
The i.MX943 System Manager (SM) firmware supports the System Control Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM. The base offset for the i.MX943 IOMUXC Daisy input register differs from that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for i.MX943. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250516100423.1685732-1-ping.bai@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-21pinctrl: core: add devm_pinctrl_register_mappings()Thomas Richard
Using devm_pinctrl_register_mappings(), the core can automatically unregister pinctrl mappings. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/20250520-aaeon-up-board-pinctrl-support-v6-3-dcb3756be3c6@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-21pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platformsNícolas F. R. A. Prado
Commit 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") introduced an access to the 'soc' field of struct mtk_pinctrl in mtk_eint_do_init() and for that an include of pinctrl-mtk-common-v2.h. However, pinctrl drivers relying on the v1 common driver include pinctrl-mtk-common.h instead, which provides another definition of struct mtk_pinctrl that does not contain an 'soc' field. Since mtk_eint_do_init() can be called both by v1 and v2 drivers, it will now try to dereference an invalid pointer when called on v1 platforms. This has been observed on Genio 350 EVK (MT8365), which crashes very early in boot (the kernel trace can only be seen with earlycon). In order to fix this, since 'struct mtk_pinctrl' was only needed to get a 'struct mtk_eint_pin', make 'struct mtk_eint_pin' a parameter of mtk_eint_do_init() so that callers need to supply it, removing mtk_eint_do_init()'s dependency on any particular 'struct mtk_pinctrl'. Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses") Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/20250520-genio-350-eint-null-ptr-deref-fix-v2-1-6a3ca966a7ba@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-20pinctrl: qcom: switch to devm_register_sys_off_handler()Dmitry Baryshkov
Error-handling paths in msm_pinctrl_probe() don't call a function required to unroll restart handler registration, unregister_restart_handler(). Instead of adding calls to this function, switch the msm pinctrl code into using devm_register_sys_off_handler(). Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-20pinctrl: freescale: Enable driver if platform is enabled.Alexander Stein
The pinctrl drivers are not enabled in defconfig. Instead of listing each driver in the defconfig, enable then by default if the platform/soc support is enabled as well. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/20250514131342.755840-2-alexander.stein@ew.tq-group.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-20pinctrl: freescale: Depend imx-scu driver on OFAlexander Stein
Although the driver itself does not depend on OF itself, it selects PINCTRL_IMX which depends on OF. So only select PINCTRL_IMX if OF is already selected to ensure dependencies are met. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/20250514131342.755840-1-alexander.stein@ew.tq-group.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-16pinctrl: keembay: Switch to irq_find_mapping()Jiri Slaby (SUSE)
irq_linear_revmap() is deprecated, so remove all its uses and supersede them by an identical call to irq_find_mapping(). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org
2025-05-16pinctrl: Switch to irq_domain_create_*()Jiri Slaby (SUSE)
irq_domain_add_*() interfaces are going away as being obsolete now. Switch to the preferred irq_domain_create_*() ones. Those differ in the node parameter: They take more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the original parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). [ tglx: Fix up subject prefix ] Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/all/20250319092951.37667-31-jirislaby@kernel.org
2025-05-15Merge branch 'ib-armada-for-v6.16' into develLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()Gabor Juhos
The regmap_update_bits() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-7-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()Gabor Juhos
The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-6-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()Gabor Juhos
The armada_37xx_gpio_direction_{in,out}put() functions can fail, so propagate their error values back to the stack instead of silently ignoring those. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-5-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()Gabor Juhos
The regmap_read() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-4-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()Gabor Juhos
The regmap_update_bits() function can fail, so propagate its error up to the stack instead of silently ignoring that. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-3-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: set GPIO output value before setting directionGabor Juhos
Changing the direction before updating the output value in the OUTPUT_VAL register may result in a glitch on the output line if the previous value in the OUTPUT_VAL register is different from the one we want to set. In order to avoid that, update the output value before changing the direction. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-2-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-15pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31Gabor Juhos
The controller has two consecutive OUTPUT_VAL registers and both holds output value for 32 GPIOs. Due to a missing adjustment, the current code always uses the first register while setting the output value whereas it should use the second one for GPIOs > 31. Add the missing armada_37xx_update_reg() call to adjust the register according to the 'offset' parameter of the function to fix the issue. Cc: stable@vger.kernel.org Fixes: 6702abb3bf23 ("pinctrl: armada-37xx: Fix direction_output() callback behavior") Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/20250514-pinctrl-a37xx-fixes-v2-1-07e9ac1ab737@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-14Merge tag 'samsung-pinctrl-6.16' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v6.16 Refactor the driver suspend and resume to handle Google GS101 EINT GPIO pin banks and add the alive pin bank for that SoC. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: meson: Drop unused aml_pctl_find_group_by_name()Krzysztof Kozlowski
aml_pctl_find_group_by_name() is not used anywhere, as reported by W=1 clang build: pinctrl-amlogic-a4.c:600:2: error: unused function 'aml_pctl_find_group_by_name' [-Werror,-Wunused-function] Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/20250509150114.299962-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: at91: Fix possible out-of-boundary accessAndy Shevchenko
at91_gpio_probe() doesn't check that given OF alias is not available or something went wrong when trying to get it. This might have consequences when accessing gpio_chips array with that value as an index. Note, that BUG() can be compiled out and hence won't actually perform the required checks. Fixes: 6732ae5cb47c ("ARM: at91: add pinctrl support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Closes: https://lore.kernel.org/r/202505052343.UHF1Zo93-lkp@intel.com/ Link: https://lore.kernel.org/20250508200807.1384558-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: add stubs for OF-specific pinconf functionsBartosz Golaszewski
Allow building drivers using these interfaces with COMPILE_TEST enabled and OF disabled by providing stub definitions. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505072245.OgSXI1hh-lkp@intel.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250507143551.47056-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: qcom: correct the ngpios entry for QCS8300Lijuan Gao
Correct the ngpios entry to account for the UFS_RESET pin, which is expected to be wired to the reset pin of the primary UFS memory and is exported as GPIOs in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: 0c4cd2cc87c8 ("pinctrl: qcom: add the tlmm driver for QCS8300 platforms") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-4-49a7d292befa@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: qcom: correct the ngpios entry for QCS615Lijuan Gao
Correct the ngpios entry to account for the UFS_RESET pin being exported as a GPIO in addition to the real GPIOs, allowing the UFS driver to toggle it. Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com> Link: https://lore.kernel.org/20250506-correct_gpio_ranges-v3-3-49a7d292befa@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-13pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unsetRafael J. Wysocki
After recent changes, pinctrl-amd will not support hibernation when CONFIG_HIBERNATION is set and CONFIG_SUSPEND isn't because it will not register amd_gpio_pm_ops then. Address this by restoring dependencies on CONFIG_PM_SLEEP where necessary for hibernation support. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/5889368.DvuYhMxLoT@rjwysocki.net
2025-05-13Merge tag 'renesas-pinctrl-for-v6.16-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.16 - Add support for the RZ/V2N (R9A09G056) Soc. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm2835: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-3-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: iproc-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-2-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: bcm: nsp-gpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-bcm-v1-1-6b8883d79b66@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: common: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-5-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: moore: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-4-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: paris: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-3-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: paris: don't double-check the GPIO numberBartosz Golaszewski
GPIO core already makes sure we don't pass invalid GPIO numbers down to the driver callbacks. Remove needless checks from the driver. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-2-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-09pinctrl: mediatek: airoha: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/20250425-gpiochip-set-rv-pinctrl-mediatek-v1-1-93e6a01855e7@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-08pinctrl: at91: drop unneeded dependency on OF_GPIOBartosz Golaszewski
This driver does not use any symbols from gpiolib-of.c. There's no reason for it to select OF_GPIO directly. This addresses a kismet issue reported by the build bot. Fixes: 8e86af65f39d ("pinctrl: at91: allow building the module with COMPILE_TEST=y") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505010447.kUlI61vt-lkp@intel.com/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250502100841.113091-1-brgl@bgdev.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-05-06pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'Mario Limonciello
`pinctrl_amd_s2idle_dev_ops` is hidden under both `CONFIG_ACPI` and `CONFIG_PM_SLEEP` so the functions that use it need the same scope. Adjust checks to look for both, and while updating make it CONFIG_SUSPEND instead as that's what the ACPI header uses. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504100420.88UPkUTU-lkp@intel.com/ Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20250414203551.779320-1-superm1@kernel.org [ rjw: Add missing #ifdef/#endif block ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-05-05pinctrl: renesas: rzg2l: Add support for RZ/V2N SoCLad Prabhakar
Add pinctrl support for the Renesas RZ/V2N SoC by reusing the existing RZ/V2H(P) pin configuration data. The PFC block is nearly identical, with the only difference being the absence of `PCIE1_RSTOUTB` on RZ/V2N. To handle this, the rzv2h_dedicated_pins array is refactored into a common and pcie1 subset. This enables reuse of the common portion across both SoCs, while excluding PCIE1_RSTOUTB for RZ/V2N. This change allows the pinctrl-rzg2l driver to support RZ/V2N without duplicating large parts of the RZ/V2H configuration. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250415130854.242227-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-29pinctrl: samsung: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-12-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: pistachio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-11-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: armada-37xx: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-10-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: at91: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-9-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: at91: allow building the module with COMPILE_TEST=yBartosz Golaszewski
Extend the build coverage by allowing to build the module with COMPILE_TEST enabled. We can do this as the driver doesn't depend on any architecture-specific bits. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-8-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: microchip-sgpio: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-7-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: ingenic: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-6-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: stm32: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-5-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: owl: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-4-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: stmfx: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-3-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: axp209: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-2-504f91120b99@linaro.org [Drop unnecessary curly braces] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: amd: use new GPIO line value setter callbacksBartosz Golaszewski
struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/20250424-gpiochip-set-rv-pinctrl-part2-v1-1-504f91120b99@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-29pinctrl: qcom: Fix PINGROUP definition for sm8750Maulik Shah
On newer SoCs intr_target_bit position is at 8 instead of 5. Fix it. Also add missing intr_wakeup_present_bit and intr_wakeup_enable_bit which enables forwarding of GPIO interrupts to parent PDC interrupt controller. Fixes: afe9803e3b82 ("pinctrl: qcom: Add sm8750 pinctrl driver") Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Melody Olvera <melody.olvera@oss.qualcomm.com> Link: https://lore.kernel.org/20250429-pinctrl_sm8750-v2-1-87d45dd3bd82@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-04-23pinctrl: mediatek: common-v1: Fix error checking in mtk_eint_init()Dan Carpenter
The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Then on the next line it checks the same pointer again by mistake, "->base" instead of "->base[0]". Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-13 14:15:33 +0000