| Age | Commit message (Collapse) | Author |
|---|
|
A new macro will be used for the further refactoring of the drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This exports and calls the pinctrl_provide_dummies() function from
the CIX SKY1 driver.
The reasons are explained in a comment in the commit, in essence the
two pin controllers need to go through explicit state transitions
default->sleep->default despite they only handle one single state
each.
Reviewed-by: Hans Zhang <hans.zhang@cixtech.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Unify error messages that might appear during probe phase by
switching to use dev_err_probe().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
With LLVM prior to 17.0.0:
drivers/pinctrl/pinctrl-mpfs-iomux0.c:89:2: error: initializer element is not a compile-time constant
MPFS_IOMUX0_GROUP(spi0),
^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-mpfs-iomux0.c:79:10: note: expanded from macro 'MPFS_IOMUX0_GROUP'
.mask = BIT(mpfs_iomux0_##_name##_pins[0]), \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/vdso/bits.h:7:19: note: expanded from macro 'BIT'
\#define BIT(nr) (UL(1) << (nr))
^~~~~~~~~~~~~~~
This is a constant, but LLVM prior to a change from Nick to match the
gcc behaviour did not allow this. The macro isn't really all that much
of an idiot-proofing, just change it to the same sort that's in the
gpio2 driver, where a second argument provides the mask/setting.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/2140
Fixes: 46397274da22 ("pinctrl: add polarfire soc iomux0 pinmux driver")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In stm32_pctl_probe(), hwspin_lock_request_specific() is called to
request a hwspinlock, but the acquired lock is not freed on multiple
error paths after this call. This causes resource leakage when the
function fails to initialize properly.
Use devm_hwspin_lock_request_specific() instead of
hwspin_lock_request_specific() to automatically manage the hwspinlock
resource lifecycle.
Fixes: 97cfb6cd34f2 ("pinctrl: stm32: protect configuration registers with a hwspinlock")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The probe function does not guarantee that chip registers are in their
default state. Thus using reg_defaults for regmap is incorrect.
For example, the chip may have already been configured by the bootloader
before the Linux driver loads, or the mcp might not have a reset at all
and not reset a state between reboots.
In such cases, using reg_defaults leads to the cache values diverging
from the actual registers values in the chip.
Previous attempts to fix consequences of this issue were made in
'commit 3ede3f8b4b4b ("pinctrl: mcp23s08: Reset all pins to input at
probe")', but this is insufficient. The OLAT register reset is also
required. And there's still potential for new issues arising due to cache
desynchronization of other registers.
Therefore, remove reg_defaults and provide num_reg_defaults_raw. In that
case the cache defaults being initialized from hardware.
Also switch cache type to REGCACHE_MAPLE, which is aware of (in)valid
cache entries.
And remove the force reset all pins to input at probe as it is no longer
required.
Link: https://lore.kernel.org/all/20251009132651.649099-2-bigunclemax@gmail.com/
Suggested-by: Mike Looijmans <mike.looijmans@topic.nl>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The ->pins and ->nr_pins members are not used so delete them.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Devices in the stm32mp2xx family include an I/O synchronization
block on each pin that is used to fine tune and improve the I/O
timing margins of high speed synchronous interfaces.
It can be configured to provide independently for each pin:
- skew rate on input direction or latch delay on output direction;
- inversion of clock signals or re-sampling of data signals.
Add support for the generic properties:
- skew-delay-input-ps;
- skew-delay-output-ps.
Add support for the property 'st,io-sync' to configure clock
inversion or data re-sampling mode.
Show the new parameters on debugfs pinconf-pins.
Enable it for the stm32mp257 pinctrl driver.
Co-developed-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Co-developed-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Change type of variable to avoid keeping the bool return value in
a variable of u32 type.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There is no need to acquire a spinlock to only read a register for
debugfs reporting.
Drop such useless spinlock save and restore.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use C bit-field to keep the backup of the pin status, instead of
explicitly handling the bit-field through shift and mask of a u32
container.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Reduce the number of parameters of the function by moving inside
the function the decoding of the field 'config'.
While there:
- change the type of 'param' to 'unsigned int' to handle the extra
values not in 'enum pin_config_param';
- change the type of 'arg' to 'u32' to avoid additional conversions
and align to 'u32' the corresponding param of __stm32_gpio_set().
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to the generic parameters used for parsing DT files. This allows to
specify the independent skew delay value for the two directions.
This enables drivers that use the generic pin configuration to get
the value passed through these new properties.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow a generic pinconf property to specify its argument as one of
the strings in a match list.
Convert the matching string to an integer value using the index in
the list, then keep using this value in the generic pinconf code.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
s/specyfying/specifying/
s/propertity/property/
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There are two pin-controllers on Cix Sky1 platform.
one is used under S0 state, the other is used under S0 and S5 state.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
[Dropped pinctrl_provide_dummies()]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
rzg2l_gpio_irq_set_type() and rzg2l_gpio_irqc_eoi() only call the
equivalent parent functions, replace their usage with the parent
functions and remove them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251022074100.1994447-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
On Polarfire SoC, iomux0 is responsible for routing functions to either
Multiprocessor Subsystem (MSS) IOs or to the FPGA fabric, where they
can either interface with custom RTL or be routed to the FPGA fabric's
IOs. Add a driver for it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The pic64gx has a second pinmux "downstream" of the iomux0 pinmux. The
documentation for the SoC provides no name for this device, but it is
used to swap pins between either GPIO controller #2 or select other
functions, hence the "gpio2" name. Add a driver for it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The rza1_mux_conf object pointed to by the mux_conf parameter of
rza1_pin_mux_single() is never modified. Make it const.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/168e06bc57081aa3c42ff9aa2740a0a108df7d34.1761033950.git.geert+renesas@glider.be
|
|
The pinctrl-rtd driver uses 'devm_regmap_init_mmio', which requires
'REGMAP_MMIO' to be enabled.
Without this selection, the build fails with an undefined reference:
aarch64-none-linux-gnu-ld: drivers/pinctrl/realtek/pinctrl-rtd.o: in
function rtd_pinctrl_probe': pinctrl-rtd.c:(.text+0x5a0): undefined
reference to __devm_regmap_init_mmio_clk'
Fix this by selecting 'REGMAP_MMIO' in the Kconfig.
Fixes: e99ce78030db ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
soc/drivers
arm64: Xilinx SOC changes for 6.18
firmware:
- Add debugfs interface
- Wire versal-net compatible string
- Change SOC family detection
* tag 'zynqmp-soc-for-6.18' of https://github.com/Xilinx/linux-xlnx:
drivers: firmware: xilinx: Switch to new family code in zynqmp_pm_get_family_info()
drivers: firmware: xilinx: Add unique family code for all platforms
firmware: xilinx: Add Versal NET platform compatible string
firmware: xilinx: Add debugfs support for PM_GET_NODE_STATUS
|
|
Add csus_mux for further use as the csus clock parent, similar to how the
cdev1 and cdev2 muxes are utilized. Additionally, constify the cdev parent
name lists to resolve checkpatch warnings.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Semicolons after end of function braces are not needed, remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/99db8c1bfb64980b54a4b5c4988c7935609133e1.1758718027.git.geert+renesas@glider.be
|
|
Semicolons after end of function braces are unnecessary, remove them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923174951.1136259-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
PMC restore needs unlocking the register using the PWPR register.
Fixes: ede014cd1ea6422d ("pinctrl: renesas: rzg2l: Add function pointer for PMC register write")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250921111557.103069-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Remove duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918200409.37284-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
There is no need to reconfigure a pin if the pin's configuration
values are the same as the reset values. E.g. the PS0 pin configuration
for the NMI function is PMC = 1 and PFC = 0, which is the same as the
reset values. Currently the code is first setting it to GPIO HI-Z state
and then again reconfiguring to the NMI function, leading to spurious
IRQs. Fix this by dropping unnecessary pin configuration from the
driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250909104247.3309-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in
gpio_irq_{en,dis}able*()") dropped the configuration of ISEL from
struct irq_chip::{irq_enable, irq_disable} APIs and moved it to
struct gpio_chip::irq::{child_to_parent_hwirq,
child_irq_domain_ops::free} APIs to fix spurious IRQs.
After commit 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL
in gpio_irq_{en,dis}able*()"), ISEL was no longer configured properly on
resume. This is because the pinctrl resume code used
struct irq_chip::irq_enable (called from rzg2l_gpio_irq_restore()) to
reconfigure the wakeup interrupts. Some drivers (e.g. Ethernet) may also
reconfigure non-wakeup interrupts on resume through their own code,
eventually calling struct irq_chip::irq_enable.
Fix this by adding ISEL configuration back into the
struct irq_chip::irq_enable API and on resume path for wakeup interrupts.
As struct irq_chip::irq_enable needs now to lock to update the ISEL,
convert the struct rzg2l_pinctrl::lock to a raw spinlock and replace the
locking API calls with the raw variants. Otherwise the lockdep reports
invalid wait context when probing the adv7511 module on RZ/G2L:
[ BUG: Invalid wait context ]
6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 Not tainted
-----------------------------
(udev-worker)/165 is trying to lock:
ffff00000e3664a8 (&pctrl->lock){....}-{3:3}, at: rzg2l_gpio_irq_enable+0x38/0x78
other info that might help us debug this:
context-{5:5}
3 locks held by (udev-worker)/165:
#0: ffff00000e890108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x90/0x1ac
#1: ffff000011c07240 (request_class){+.+.}-{4:4}, at: __setup_irq+0xb4/0x6dc
#2: ffff000011c070c8 (lock_class){....}-{2:2}, at: __setup_irq+0xdc/0x6dc
stack backtrace:
CPU: 1 UID: 0 PID: 165 Comm: (udev-worker) Not tainted 6.17.0-rc5-next-20250911-00001-gfcfac22533c9 #18 PREEMPT
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__lock_acquire+0xa14/0x20b4
lock_acquire+0x1c8/0x354
_raw_spin_lock_irqsave+0x60/0x88
rzg2l_gpio_irq_enable+0x38/0x78
irq_enable+0x40/0x8c
__irq_startup+0x78/0xa4
irq_startup+0x108/0x16c
__setup_irq+0x3c0/0x6dc
request_threaded_irq+0xec/0x1ac
devm_request_threaded_irq+0x80/0x134
adv7511_probe+0x928/0x9a4 [adv7511]
i2c_device_probe+0x22c/0x3dc
really_probe+0xbc/0x2a0
__driver_probe_device+0x78/0x12c
driver_probe_device+0x40/0x164
__driver_attach+0x9c/0x1ac
bus_for_each_dev+0x74/0xd0
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x60/0x128
i2c_register_driver+0x48/0xd0
adv7511_init+0x5c/0x1000 [adv7511]
do_one_initcall+0x64/0x30c
do_init_module+0x58/0x23c
load_module+0x1bcc/0x1d40
init_module_from_file+0x88/0xc4
idempotent_init_module+0x188/0x27c
__arm64_sys_finit_module+0x68/0xac
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x160
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Having ISEL configuration back into the struct irq_chip::irq_enable API
should be safe with respect to spurious IRQs, as in the probe case IRQs
are enabled anyway in struct gpio_chip::irq::child_to_parent_hwirq. No
spurious IRQs were detected on suspend/resume, boot, ethernet link
insert/remove tests (executed on RZ/G3S). Boot, ethernet link
insert/remove tests were also executed successfully on RZ/G2L.
Fixes: 1d2da79708cb ("pinctrl: renesas: rzg2l: Avoid configuring ISEL in gpio_irq_{en,dis}able*(")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250912095308.3603704-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
There is no reason to print any "hello world" from pin control
unless (maybe) if we are debugging.
Drop the banner.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The mt8189-pinctrl driver requires to probe that a device tree uses
in the device node the same names than mt8189_pinctrl_register_base_names
array. But they are not matching the required ones in the
"mediatek,mt8189-pinctrl" dt-bindings, leading to possible dtbs check
issues. The mt8189_pinctrl_register_base_names entry order is also
different.
So, align all mt8189_pinctrl_register_base_names entry names and order
on dt-bindings.
Fixes: a3fe1324c3c5 ("pinctrl: mediatek: Add pinctrl driver for mt8189")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The mt8196-pinctrl driver requires to probe that a device tree uses
in the device node the same names than mt8196_pinctrl_register_base_names
array. But they are not matching the required ones in the
"mediatek,mt8196-pinctrl" dt-bindings, leading to possible dtbs check
issues.
So, align all mt8196_pinctrl_register_base_names entries on dt-bindings
ones.
Fixes: f7a29377c253 ("pinctrl: mediatek: Add pinctrl driver on mt8196")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for Kaanapali TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for SPMI PMIC GPIO subtypes GPIO_LV_VIN2_CLK and
GPIO_MV_VIN3_CLK.
Signed-off-by: Subbaraman Narayanamurthy <subbaraman.narayanamurthy@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for PMCX0102, PMH0101, PMH0104, PMH0110 and PMK8850 PMIC
GPIOs with adding appropriate compatible strings.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Mark the gpio/egpio as GPIO specific pin functions, othewise
the pin muxing generic framework will complain about the gpio
being already requested by a different owner.
Fixes: 87ebcd8baebf ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The platform specific configuration is already passed on to the generic
msm probe. So it's useless to exist in the match table next to the
compatible. So drop it from match table.
Fixes: 87ebcd8baebf ("pinctrl: qcom: Add glymur pinctrl driver")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add driver support for the pin controller found in the MediaTek
Dimensity 7300 (MT6878) SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
MT6878 uses different debounce times than other SoCs. Add them to the
EINT driver.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add Axis ARTPEC-9 SoC specific configuration data to enable pinctrl.
Signed-off-by: SeonGu Kang <ksk4725@coasia.com>
Signed-off-by: Ravi Patel <ravi.patel@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add support for the pin-controller found on the exynos8890 SoC, used in
Samsung Galaxy S7.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have GPIO awareness in the pin control core and an interesting
AAEON driver.
Core changes:
- Allow pins to be identified/marked as GPIO mode with a special
callback.
The pin controller core is now "aware" if a pin is in GPIO mode if
the callback is implemented in the driver, and can thus be marked
as "strict", i.e. disallowing simultaneous use of a line as GPIO
and another function such as I2C.
This is enabled in the Qualcomm TLMM driver and also implemeted
from day 1 in the new Broadcom STB driver
- Rename the pin config option PIN_CONFIG_OUTPUT to PIN_CONFIG_LEVEL
to better describe what the config is doing, as well as making it
more intuitive what shall be returned when reading this property
New drivers:
- Qualcomm SDM660 LPASS LPI TLMM pin controller subdriver
- Qualcomm Glymur family pin controller driver
- Broadcom STB family pin controller driver
- Tegra186 pin controller driver
- AAEON UP pin controller support.
This is some special pin controller that works as an external
advanced line MUX and amplifier for signals from an Intel SoC. A
cooperative effort with the GPIO maintainer was needed to reach a
solution where we reuse code from the GPIO aggregator/forwarder
driver
- Renesas RZ/T2H and RZ/N2H pin controller support
- Axis ARTPEC-8 subdriver for the Samsung pin controller driver
Improvements:
- Output enable (OEN) support in the Renesas RZG2L driver
- Properly support bias pull up/down in the pinctrl-single driver
- Move over all GPIO portions using generic MMIO GPIO to the new
generic GPIO chip management which has a nice and separate API
- Proper DT bindings for some older Broadcom SoCs
- External GPIO (EGPIO) support in the Qualcomm SM8250
Deleted code:
- Dropped the now unused Samsung S3C24xx drivers"
* tag 'pinctrl-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
pinctrl: use more common syntax for compound literals
pinctrl: Simplify printks with pOF format
pinctrl: qcom: Add SDM660 LPASS LPI TLMM
dt-bindings: pinctrl: qcom: Add SDM660 LPI pinctrl
pinctrl: qcom: lpass-lpi: Add ability to use custom pin offsets
pinctrl: qcom: Add glymur pinctrl driver
dt-bindings: pinctrl: qcom: Add Glymur pinctrl
pinctrl: qcom: sm8250: Add egpio support
pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL
pinctrl: keembay: fix double free in keembay_build_functions()
pinctrl: spacemit: fix typo in PRI_TDI pin name
pinctrl: eswin: Fix regulator error check and Kconfig dependency
pinctrl: bcm: Add STB family pin controller driver
dt-bindings: pinctrl: Add support for Broadcom STB pin controller
pinctrl: qcom: make the pinmuxing strict
pinctrl: qcom: mark the `gpio` and `egpio` pins function as non-strict functions
pinctrl: qcom: add infrastructure for marking pin functions as GPIOs
pinctrl: allow to mark pin functions as requestable GPIOs
pinctrl: qcom: use generic pin function helpers
pinctrl: make struct pinfunction a pointer in struct function_desc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
|
|
Make the flags passed to gpio_generic_chip_init() use the same prefix as
the rest of the modernized generic GPIO chip API.
Link: https://lore.kernel.org/r/20250917-gpio-generic-flags-v1-1-69f51fee8c89@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
