summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2026-01-15net: hns3: Use netif_xmit_timeout_ms() helperShahar Shitrit
Replace the open-coded TX queue timeout check in hns3_get_timeout_queue() with a call to netif_xmit_timeout_ms() helper. Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com> Reviewed-by: Yael Chemla <ychemla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/1768209383-1546791-3-git-send-email-tariqt@nvidia.com Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-15virtio_net: Fix misalignment bug in struct virtnet_infoGustavo A. R. Silva
Use the new TRAILING_OVERLAP() helper to fix a misalignment bug along with the following warning: drivers/net/virtio_net.c:429:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] This helper creates a union between a flexible-array member (FAM) and a set of members that would otherwise follow it (in this case `u8 rss_hash_key_data[VIRTIO_NET_RSS_MAX_KEY_SIZE];`). This overlays the trailing members (rss_hash_key_data) onto the FAM (hash_key_data) while keeping the FAM and the start of MEMBERS aligned. The static_assert() ensures this alignment remains. Notice that due to tail padding in flexible `struct virtio_net_rss_config_trailer`, `rss_trailer.hash_key_data` (at offset 83 in struct virtnet_info) and `rss_hash_key_data` (at offset 84 in struct virtnet_info) are misaligned by one byte. See below: struct virtio_net_rss_config_trailer { __le16 max_tx_vq; /* 0 2 */ __u8 hash_key_length; /* 2 1 */ __u8 hash_key_data[]; /* 3 0 */ /* size: 4, cachelines: 1, members: 3 */ /* padding: 1 */ /* last cacheline: 4 bytes */ }; struct virtnet_info { ... struct virtio_net_rss_config_trailer rss_trailer; /* 80 4 */ /* XXX last struct has 1 byte of padding */ u8 rss_hash_key_data[40]; /* 84 40 */ ... /* size: 832, cachelines: 13, members: 48 */ /* sum members: 801, holes: 8, sum holes: 31 */ /* paddings: 2, sum paddings: 5 */ }; After changes, those members are correctly aligned at offset 795: struct virtnet_info { ... union { struct virtio_net_rss_config_trailer rss_trailer; /* 792 4 */ struct { unsigned char __offset_to_hash_key_data[3]; /* 792 3 */ u8 rss_hash_key_data[40]; /* 795 40 */ }; /* 792 43 */ }; /* 792 44 */ ... /* size: 840, cachelines: 14, members: 47 */ /* sum members: 801, holes: 8, sum holes: 35 */ /* padding: 4 */ /* paddings: 1, sum paddings: 4 */ /* last cacheline: 8 bytes */ }; As a result, the RSS key passed to the device is shifted by 1 byte: the last byte is cut off, and instead a (possibly uninitialized) byte is added at the beginning. As a last note `struct virtio_net_rss_config_hdr *rss_hdr;` is also moved to the end, since it seems those three members should stick around together. :) Cc: stable@vger.kernel.org Fixes: ed3100e90d0d ("virtio_net: Use new RSS config structs") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/aWIItWq5dV9XTTCJ@kspp Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-15can: propagate CAN device capabilities via ml_privOliver Hartkopp
Commit 1a620a723853 ("can: raw: instantly reject unsupported CAN frames") caused a sequence of dependency and linker fixes. Instead of accessing CAN device internal data structures which caused the dependency problems this patch introduces capability information into the CAN specific ml_priv data which is accessible from both sides. With this change the CAN network layer can check the required features and the decoupling of the driver layer and network layer is restored. Fixes: 1a620a723853 ("can: raw: instantly reject unsupported CAN frames") Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260109144135.8495-3-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2026-01-15Revert "can: raw: instantly reject unsupported CAN frames"Oliver Hartkopp
This reverts commit 1a620a723853a0f49703c317d52dc6b9602cbaa8 and its follow-up fixes for the introduced dependency issues. commit 1a620a723853 ("can: raw: instantly reject unsupported CAN frames") commit cb2dc6d2869a ("can: Kconfig: select CAN driver infrastructure by default") commit 6abd4577bccc ("can: fix build dependency") commit 5a5aff6338c0 ("can: fix build dependency") The entire problem was caused by the requirement that a new network layer feature needed to know about the protocol capabilities of the CAN devices. Instead of accessing CAN device internal data structures which caused the dependency problems a better approach has been developed which makes use of CAN specific ml_priv data which is accessible from both sides. Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260109144135.8495-2-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2026-01-15wifi: rtw89: pci: consider RTL8922D in PCI common flowPing-Ke Shih
Clear TX/RX ring index, PCI operating mode, SER setting, PCI LTR and preinit settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-9-pkshih@realtek.com
2026-01-15wifi: rtw89: mac: consider RTL8922D in MAC common flowPing-Ke Shih
The MAC settings are different from RTL8922A to RTL8922D, including scheduler, DLE, DCPU, MLO, NAV, TMAC, TX/RX protocol, RMAC, IMR, host RPT, AMSDU. Update them accordingly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-8-pkshih@realtek.com
2026-01-15wifi: rtw89: mac: correct page number for CSI responsePing-Ke Shih
For beamforming procedure, hardware reserve memory page for CSI response. The unit of register is (value - 1), so add one accordingly as expected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-7-pkshih@realtek.com
2026-01-15wifi: rtw89: align CUSTID defined by firmwarePing-Ke Shih
Firmware does customized features by CUSTID, so align the ID definition to have expected features enabled. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-6-pkshih@realtek.com
2026-01-15wifi: rtw89: disable EHT protocol by chip capabilitiesPing-Ke Shih
For certain chip models, EHT protocol is disabled, and driver must follow the capabilities. Otherwise, chips become unusable. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-5-pkshih@realtek.com
2026-01-15wifi: rtw89: support EHT GI/LTF settingKuan-Chung Chen
Add support for fixed EHT GI/LTF via nl80211. The command example: iw wlan0 set bitrates eht-gi-6 0.8 eht-ltf-6 2 Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-4-pkshih@realtek.com
2026-01-15wifi: rtw89: wow: add reason codes for disassociation in WoWLAN modeChin-Yen Lee
Some APs disconnect clients by sending a Disassociation frame rather than a Deauthentication frame. Since these frames use different reason codes in WoWLAN mode, this commit adds support for handling Disassociation to prevent missed disconnection events. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-3-pkshih@realtek.com
2026-01-15wifi: rtw89: pci: validate sequence number of TX release reportPing-Ke Shih
Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: <IRQ> rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 </IRQ> <TASK> rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> To prevent crash, validate rpp_info.seq before using. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20260110022019.2254969-2-pkshih@realtek.com
2026-01-14Merge tag 'ath-current-20260113' of ↵Johannes Berg
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless Jeff Johnson says: ================== ath.git update for v6.19-rc6 A collection of small bug fixes in ath10k and ath12k. ================== Link: https://patch.msgid.link/98386125-c0bb-495e-b2ba-2765aaed19d8@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2026-01-13net: mana: Implement ndo_tx_timeout and serialize queue resets per port.Dipayaan Roy
Implement .ndo_tx_timeout for MANA so any stalled TX queue can be detected and a device-controlled port reset for all queues can be scheduled to a ordered workqueue. The reset for all queues on stall detection is recomended by hardware team. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20260112130552.GA11785@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: hv_netvsc: reject RSS hash key programming without RX indirection tableAditya Garg
RSS configuration requires a valid RX indirection table. When the device reports a single receive queue, rndis_filter_device_add() does not allocate an indirection table, accepting RSS hash key updates in this state leads to a hang. Fix this by gating netvsc_set_rxfh() on ndc->rx_table_sz and return -EOPNOTSUPP when the table is absent. This aligns set_rxfh with the device capabilities and prevents incorrect behavior. Fixes: 962f3fee83a4 ("netvsc: add ethtool ops to get/set RSS key") Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com> Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Link: https://patch.msgid.link/1768212093-1594-1-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: sxgbe: fix typo in commentJinseok Kim
Fix a misspelling in the sxgbe_mtl_init() function comment. "Algorith" should be spelled as "Algorithm". Signed-off-by: Jinseok Kim <always.starving0@gmail.com> Link: https://patch.msgid.link/20260112044147.2844-1-always.starving0@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: fixed_phy: replace IDA with a bitmapHeiner Kallweit
Size of array fmb_fixed_phys is small, so we can use a simple bitmap instead of an IDA to manage dynamic allocation of fixed PHY's. find_first_zero_bit() isn't atomic, so we need the loop to rule out double allocation of a PHY address. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/d4614463-d532-41fc-92e9-ef97107aceb5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: fixed_phy: replace list of fixed PHYs with static arrayHeiner Kallweit
Due to max 32 PHY addresses being available per mii bus, using a list can't support more fixed PHY's. And there's no known use case for as much as 32 fixed PHY's on a system. 8 should be plenty of fixed PHY's, so use an array of that size instead of a list. This allows to significantly reduce the code size and complexity. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/8610d30c-eac7-4100-9008-d3b6cee6a5cd@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: Only rely on phy_port for PHY-driven SFPMaxime Chevallier
Now that all PHY drivers that support downstream SFP have been converted to phy_port serdes handling, we can make the generic PHY SFP handling mandatory, thus making all phylib sfp helpers static. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-14-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: qca807x: Support SFP through phy_port interfaceMaxime Chevallier
QCA8072/8075 may be used as combo-port PHYs, with Serdes (100/1000BaseX) and Copper interfaces. The PHY has the ability to read the configuration it's in. If the configuration indicates the PHY is in combo mode, allow registering up to 2 ports. Register a dedicated set of port ops to handle the serdes port, and rely on generic phylib SFP support for the SFP handling. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-13-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: at803x: Support SFP through phy_port interfaceMaxime Chevallier
Convert the at803x driver to use the generic phylib SFP handling, via a dedicated .attach_port() callback, populating the supported interfaces. As these devices are limited to 1000BaseX, a workaround is used to also support, in a very limited way, copper modules. This is done by supporting SGMII but limiting it to 1G full duplex (in which case it's somewhat compatible with 1000BaseX). Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-12-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: marvell10g: Support SFP through phy_portMaxime Chevallier
Convert the Marvell10G driver to use the generic SFP handling, through a dedicated .attach_port() handler to populate the port's supported interfaces. As the 88x3310 supports multiple MDI, the .attach_port() logic handles both SFP attach with 10GBaseR support, and support for the "regular" port that usually is a BaseT port. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-11-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: marvell: Support SFP through phy_port interfaceMaxime Chevallier
Convert the Marvell driver (especially the 88e1512 driver) to use the phy_port interface to handle SFPs. This means registering a .attach_port() handler to detect when a serdes line interface is used (most likely, and SFP module). Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-10-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: marvell-88x2222: Support SFP through phy_port interfaceMaxime Chevallier
The 88x2222 PHY from Marvell only supports serialised modes as its line-facing interfaces. Convert that driver to the generic phylib SFP handling. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-9-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: Introduce generic SFP handling for PHY driversMaxime Chevallier
There are currently 4 PHY drivers that can drive downstream SFPs: marvell.c, marvell10g.c, at803x.c and marvell-88x2222.c. Most of the logic is boilerplate, either calling into generic phylib helpers (for SFP PHY attach, bus attach, etc.) or performing the same tasks with a bit of validation : - Getting the module's expected interface mode - Making sure the PHY supports it - Optionaly perform some configuration to make sure the PHY outputs the right mode This can be made more generic by leveraging the phy_port, and its configure_mii() callback which allows setting a port's interfaces when the port is a serdes. Introduce a generic PHY SFP support. If a driver doesn't probe the SFP bus itself, but an SFP phandle is found in devicetree/firmware, then the generic PHY SFP support will be used, relying on port ops. PHY driver need to : - Register a .attach_port() callback - When a serdes port is registered to the PHY, drivers must set port->interfaces to the set of PHY_INTERFACE_MODE the port can output - If the port has limitations regarding speed, duplex and aneg, the port can also fine-tune the final linkmodes that can be supported - The port may register a set of ops, including .configure_mii(), that will be called at module_insert time to adjust the interface based on the module detected. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-8-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: Create a phy_port for PHY-driven SFPsMaxime Chevallier
Some PHY devices may be used as media-converters to drive SFP ports (for example, to allow using SFP when the SoC can only output RGMII). This is already supported to some extend by allowing PHY drivers to registers themselves as being SFP upstream. However, the logic to drive the SFP can actually be split to a per-port control logic, allowing support for multi-port PHYs, or PHYs that can either drive SFPs or Copper. To that extent, create a phy_port when registering an SFP bus onto a PHY. This port is considered a "serdes" port, in that it can feed data to another entity on the link. The PHY driver needs to specify the various PHY_INTERFACE_MODE_XXX that this port supports. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-7-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: dp83822: Add support for phy_port representationMaxime Chevallier
With the phy_port representation introduced, we can use .attach_port to populate the port information based on either the straps or the ti,fiber-mode property. This allows simplifying the probe function and allow users to override the strapping configuration. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260108080041.553250-5-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: phy: Introduce PHY ports representationMaxime Chevallier
Ethernet provides a wide variety of layer 1 protocols and standards for data transmission. The front-facing ports of an interface have their own complexity and configurability. Introduce a representation of these front-facing ports. The current code is minimalistic and only support ports controlled by PHY devices, but the plan is to extend that to SFP as well as raw Ethernet MACs that don't use PHY devices. This minimal port representation allows describing the media and number of pairs of a BaseT port. From that information, we can derive the linkmodes usable on the port, which can be used to limit the capabilities of an interface. For now, the port pairs and medium is derived from devicetree, defined by the PHY driver, or populated with default values (as we assume that all PHYs expose at least one port). The typical example is 100M ethernet. 100BaseTX works using only 2 pairs on a Cat 5 cables. However, in the situation where a 10/100/1000 capable PHY is wired to its RJ45 port through 2 pairs only, we have no way of detecting that. The "max-speed" DT property can be used, but a more accurate representation can be used : mdi { connector-0 { media = "BaseT"; pairs = <2>; }; }; From that information, we can derive the max speed reachable on the port. Another benefit of having that is to avoid vendor-specific DT properties (micrel,fiber-mode or ti,fiber-mode). This basic representation is meant to be expanded, by the introduction of port ops, userspace listing of ports, and support for multi-port devices. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* valuesMaxime Chevallier
In an effort to have a better representation of Ethernet ports, introduce enumeration values representing the various ethernet Mediums. This is part of the 802.3 naming convention, for example : 1000 Base T 4 | | | | | | | \_ pairs (4) | | \___ Medium (T == Twisted Copper Pairs) | \_______ Baseband transmission \____________ Speed Other example : 10000 Base K X 4 | | \_ lanes (4) | \___ encoding (BaseX is 8b/10b while BaseR is 66b/64b) \_____ Medium (K is backplane ethernet) In the case of representing a physical port, only the medium and number of pairs should be relevant. One exception would be 1000BaseX, which is currently also used as a medium in what appears to be any of 1000BaseSX, 1000BaseCX, 1000BaseLX, 1000BaseEX, 1000BaseBX10 and some other. This was reflected in the mediums associated with the 1000BaseX linkmode. These mediums are set in the net/ethtool/common.c lookup table that maintains a list of all linkmodes with their number of pairs, medium, encoding, speed and duplex. One notable exception to this is 100BaseT Ethernet. It emcompasses 100BaseTX, which is a 2-pairs protocol but also 100BaseT4, that will also work on 4-pairs cables. As we don't make a disctinction between these, the lookup table contains 2 sets of pair numbers, indicating the min number of pairs for a protocol to work and the "nominal" number of pairs as well. Another set of exceptions are linkmodes such 100000baseLR4_ER4, where the same link mode seems to represent 100GBaseLR4 and 100GBaseER4. The macro __DEFINE_LINK_MODE_PARAMS_MEDIUMS is here used to populate the .mediums bitfield with all appropriate mediums. Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260108080041.553250-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-14eth: bnxt: support qcfg provided rx page sizePavel Begunkov
Implement support for qcfg provided rx page sizes. For that, implement the ndo_default_qcfg callback and validate the config on restart. Also, use the current config's value in bnxt_init_ring_struct to retain the correct size across resets. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
2026-01-14eth: bnxt: adjust the fill level of agg queues with larger buffersJakub Kicinski
The driver tries to provision more agg buffers than header buffers since multiple agg segments can reuse the same header. The calculation / heuristic tries to provide enough pages for 65k of data for each header (or 4 frags per header if the result is too big). This calculation is currently global to the adapter. If we increase the buffer sizes 8x we don't want 8x the amount of memory sitting on the rings. Luckily we don't have to fill the rings completely, adjust the fill level dynamically in case particular queue has buffers larger than the global size. Signed-off-by: Jakub Kicinski <kuba@kernel.org> [pavel: rebase on top of agg_size_fac] Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
2026-01-14eth: bnxt: store rx buffer size per queuePavel Begunkov
Instead of using a constant buffer length, allow configuring the size for each queue separately. There is no way to change the length yet, and it'll be passed from memory providers in a later patch. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
2026-01-14net: add bare bone queue configsPavel Begunkov
We'll need to pass extra parameters when allocating a queue for memory providers. Define a new structure for queue configurations, and pass it to qapi callbacks. It's empty for now, actual parameters will be added in following patches. Configurations should persist across resets, and for that they're default-initialised on device registration and stored in struct netdev_rx_queue. We also add a new qapi callback for defaulting a given config. It must be implemented if a driver wants to use queue configs and is optional otherwise. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
2026-01-13Merge branch 'mlx5-next' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Tariq Toukan says: ==================== mlx5-next updates 2026-01-13 * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Add IFC bits for extended ETS rate limit bandwidth value net/mlx5: Add support for querying bond speed net/mlx5: Handle port and vport speed change events in MPESW net/mlx5: Propagate LAG effective max_tx_speed to vports net/mlx5: Add max_tx_speed and its CAP bit to IFC ==================== Link: https://patch.msgid.link/1768299471-1603093-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-13igc: Reduce TSN TX packet buffer from 7KB to 5KB per queueChwee-Lin Choong
The previous 7 KB per queue caused TX unit hangs under heavy timestamping load. Reducing to 5 KB avoids these hangs and matches the TSN recommendation in I225/I226 SW User Manual Section 7.5.4. The 8 KB "freed" by this change is currently unused. This reduction is not expected to impact throughput, as the i226 is PCIe-limited for small TSN packets rather than TX-buffer-limited. Fixes: 0d58cdc902da ("igc: optimize TX packet buffer utilization for TSN mode") Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com> Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/ Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13igc: fix race condition in TX timestamp read for register 0Chwee-Lin Choong
The current HW bug workaround checks the TXTT_0 ready bit first, then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0) to detect whether a new timestamp was captured by timestamp register 0 during the workaround. This sequence has a race: if a new timestamp is captured after checking the TXTT_0 bit but before the first TXSTMPL_0 read, the detection fails because both the "old" and "new" values come from the same timestamp. Fix by reading TXSTMPL_0 first to establish a baseline, then checking the TXTT_0 bit. This ensures any timestamp captured during the race window will be detected. Old sequence: 1. Check TXTT_0 ready bit 2. Read TXSTMPL_0 (baseline) 3. Read TXSTMPH_0 (interrupt workaround) 4. Read TXSTMPL_0 (detect changes vs baseline) New sequence: 1. Read TXSTMPL_0 (baseline) 2. Check TXTT_0 ready bit 3. Read TXSTMPH_0 (interrupt workaround) 4. Read TXSTMPL_0 (detect changes vs baseline) Fixes: c789ad7cbebc ("igc: Work around HW bug causing missing timestamps") Suggested-by: Avi Shalev <avi.shalev@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13igc: Restore default Qbv schedule when changing channelsKurt Kanzenbach
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver sets a default Qbv schedule of all gates opened and a cycle time of 1s. This schedule is set during probe. However, the following sequence of events lead to Tx issues: - Boot a dual core system igc_probe(): igc_tsn_clear_schedule(): -> Default Schedule is set Note: At this point the driver has allocated two Tx/Rx queues, because there are only two CPUs. - ethtool -L enp3s0 combined 4 igc_ethtool_set_channels(): igc_reinit_queues() -> Default schedule is gone, per Tx ring start and end time are zero - tc qdisc replace dev enp3s0 handle 100 parent root mqprio \ num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \ queues 1@0 1@1 1@2 1@3 hw 1 igc_tsn_offload_apply(): igc_tsn_enable_offload(): -> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail Therefore, restore the default Qbv schedule after changing the number of channels. Furthermore, add a restriction to not allow queue reconfiguration when TSN/Qbv is enabled, because it may lead to inconsistent states. Fixes: c814a2d2d48f ("igc: Use default cycle 'start' and 'end' values for queues") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13ice: Fix incorrect timeout ice_release_res()Ding Hui
The commit 5f6df173f92e ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies to microseconds. But the ice_release_res() function was missed, and its logic still treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value. So correct the issue by usecs_to_jiffies(). Found by inspection of the DDP downloading process. Compile and modprobe tested only. Fixes: 5f6df173f92e ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13ice: Avoid detrimental cleanup for bond during interface stopDave Ertman
When the user issues an administrative down to an interface that is the primary for an aggregate bond, the prune lists are being purged. This breaks communication to the secondary interface, which shares a prune list on the main switch block while bonded together. For the primary interface of an aggregate, avoid deleting these prune lists during stop, and since they are hardcoded to specific values for the default vlan and QinQ vlans, the attempt to re-add them during the up phase will quietly fail without any additional problem. Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13ice: initialize ring_stats->syncpJacob Keller
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit systems it contains a seqcount_t which needs to be initialized. While the memory is zero-initialized, a lack of u64_stats_init means that lockdep won't get initialized properly. Fix this by adding u64_stats_init() calls to the rings just after allocation. Fixes: 2b245cb29421 ("ice: Implement transmit and NAPI support") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2026-01-13wifi: ath12k: Fix wrong P2P device link id issueYingying Tang
Wrong P2P device link id value of 0 was introduced in ath12k_mac_op_tx() by [1]. During the P2P negotiation process, there is only one scan vdev with link ID 15. Currently, the device link ID is incorrectly set to 0 in ath12k_mac_op_tx() during the P2P negotiation process, which leads to TX failures. Set the correct P2P device link ID to 15 to fix the TX failure issue. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: 648a121bafa3 ("wifi: ath12k: ath12k_mac_op_tx(): MLO support") # [1] Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Cc: linux-next@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://patch.msgid.link/20260113054636.2620035-1-yingying.tang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> --- Note to linux-next and netdev maintainers: This patch going through the "current" tree conflicts with the following going through the "next" tree: commit 631ee338f04d ("Merge branch 'ath12k-ng' into ath-next") The conflict resolution is to leave the following file unmodified: drivers/net/wireless/ath/ath12k/mac. And to apply the following patch to ath12k_wifi7_mac_op_tx() in the file drivers/net/wireless/ath/ath12k/wifi7/hw.c -705,7 +705,10 return; } } else { - link_id = 0; + if (vif->type == NL80211_IFTYPE_P2P_DEVICE) + link_id = ATH12K_FIRST_SCAN_LINK; + else + link_id = 0; } arvif = rcu_dereference(ahvif->link[link_id]);
2026-01-13wifi: ath12k: fix dead lock while flushing management framesBaochen Qiang
Commit [1] converted the management transmission work item into a wiphy work. Since a wiphy work can only run under wiphy lock protection, a race condition happens in below scenario: 1. a management frame is queued for transmission. 2. ath12k_mac_op_flush() gets called to flush pending frames associated with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush() the process waits for the transmission done. 3. Since wiphy lock has been taken by the flush process, the transmission work item has no chance to run, hence the dead lock. >From user view, this dead lock results in below issue: wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticate with xxxxxx (local address=xxxxxx) wlp8s0: send auth to xxxxxx (try 1/3) wlp8s0: authenticated wlp8s0: associate with xxxxxx (try 1/3) wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING) ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1 The dead lock can be avoided by invoking wiphy_work_flush() to proactively run the queued work item. Note actually it is already present in ath12k_mac_op_flush(), however it does not protect the case where vif being NULL. Hence move it ahead to cover this case as well. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: 56dcbf0b5207 ("wifi: ath12k: convert struct ath12k::wmi_mgmt_tx_work to struct wiphy_work") # [1] Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220959 Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20260113-ath12k-fix-dead-lock-while-flushing-v1-1-9713621f3a0f@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-01-13wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channelYingying Tang
Scan finish workqueue was introduced in __ath12k_mac_scan_finish() by [1]. During ath12k_mac_op_cancel_remain_on_channel(), scan state is set to ABORTING and should be reset to IDLE in the queued work. However, wiphy_work_cancel() is called before exiting ath12k_mac_op_cancel_remain_on_channel(), which prevents the work from running and leaves the state in ABORTING. This blocks all subsequent scan requests. Replace wiphy_work_cancel() with wiphy_work_flush() to ensure the queued work runs and scan state is reset to IDLE. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: 3863f014ad23 ("wifi: ath12k: symmetrize scan vdev creation and deletion during HW scan") # [1] Signed-off-by: Yingying Tang <yingying.tang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20260112115516.2144219-1-yingying.tang@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-01-13wifi: ath12k: cancel scan only on active scan vdevManish Dharanenthiran
Cancel the scheduled scan request only on the vdev that has an active scan running. Currently, ahvif->links_map is used to obtain the links, but this includes links for which no scan is scheduled. In failure cases where the scan fails due to an invalid channel definition, other links which are not yet brought up (vdev not created) may also be accessed, leading to the following trace: Unable to handle kernel paging request at virtual address 0000000000004c8c pc : _raw_spin_lock_bh+0x1c/0x54 lr : ath12k_scan_abort+0x20/0xc8 [ath12k] Call trace: _raw_spin_lock_bh+0x1c/0x54 (P) ath12k_mac_op_cancel_hw_scan+0xac/0xc4 [ath12k] ieee80211_scan_cancel+0xcc/0x12c [mac80211] ieee80211_do_stop+0x6c4/0x7a8 [mac80211] ieee80211_stop+0x60/0xd8 [mac80211] Skip links that are not created or are not the current scan vdev. This ensures only the scan for the matching links is aborted and avoids aborting unrelated links during cancellation, thus aligning with how start/cleanup manage ar->scan.arvif. Also, remove the redundant arvif->is_started check from ath12k_mac_op_cancel_hw_scan() that was introduced in commit 3863f014ad23 ("wifi: ath12k: symmetrize scan vdev creation and deletion during HW scan") to avoid deleting the scan interface if the scan is triggered on the existing AP vdev as this use case is already handled in ath12k_scan_vdev_clean_work(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: feed05f1526e ("wifi: ath12k: Split scan request for split band device") Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20260107-scan_vdev-v1-1-b600aedc645a@qti.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2026-01-13net: airoha: implement get_link_ksettingsAleksander Jan Bajkowski
Implement the .get_link_ksettings to get the rate, duplex, and auto-negotiation status. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20260110170212.570793-1-olek2@wp.pl Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-13r8169: enable LTR supportJaven Xu
This patch will enable RTL8168FP/RTL8168EP/RTL8168H/RTL8125/RTL8126/RTL8127 LTR support. Signed-off-by: Javen Xu <javen_xu@realsil.com.cn> Link: https://patch.msgid.link/20260109070415.1115-3-javen_xu@realsil.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-13r8169: add DASH support for RTL8127APJaven Xu
This adds DASH support for chip RTL8127AP. Its mac version is RTL_GIGA_MAC_VER_80 and revision id is 0x04. DASH is a standard for remote management of network device, allowing out-of-band control. Signed-off-by: Javen Xu <javen_xu@realsil.com.cn> Link: https://patch.msgid.link/20260109070415.1115-2-javen_xu@realsil.com.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-01-12net: stmmac: report PCS link changes to phylinkRussell King (Oracle)
Report PCS link changes to phylink, which will allow phylink's inband support to respoind to link events once the PCS is appropriately configured. An expected behavioural change is that should the PCS report that its link has failed, but phylink is operating in outband mode and the PHY reports that link is up, this event will cause the netdev's link to momentarily drop, making the event more noticable, rather than just producing a "stmmac_pcs: Link Down" message. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vevI1-00000002Yp8-3cM3@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-12net: stmmac: change arguments to PCS handler and use dev_info()Russell King (Oracle)
Change the arguments to the PCS handler so that it can access the struct device pointer and integrated PCS pointers. This allows us to use the PCS register offset stored in struct stmmac_pcs rather than passing it into the function, and also allows the messages to be printed using dev_info() rather than pr_info(), thereby allowing the stmmac instance to be identified. Finally, as dev_info() identifies the driver/device, prefixing with "stmmac_pcs: " is now redundant, so replace this with just "PCS ". Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vevHw-00000002Yoz-35A7@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-12net: stmmac: pass struct stmmac_priv to host_irq_status() methodRussell King (Oracle)
Rather than passing struct mac_device_info to the host_irq_status() method, pass struct stmmac_priv so that we can pass the integrated PCS to the PCS interrupt handler. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1vevHr-00000002YoY-2X2i@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-13 02:48:28 +0000