summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-06-26iwlwifi: fw: harden page loading codeLuca Coelho
commit 9039d985811d5b109b58b202b7594fd24e433fed upstream. The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26hv_netvsc: Fix a network regression after ifdown/ifupDexuan Cui
[ Upstream commit 52acf73b6e9a6962045feb2ba5a8921da2201915 ] Recently people reported the NIC stops working after "ifdown eth0; ifup eth0". It turns out in this case the TX queues are not enabled, after the refactoring of the common detach logic: when the NIC has sub-channels, usually we enable all the TX queues after all sub-channels are set up: see rndis_set_subchannel() -> netif_device_attach(), but in the case of "ifdown eth0; ifup eth0" where the number of channels doesn't change, we also must make sure the TX queues are enabled. The patch fixes the regression. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26net: in virtio_net_hdr only add VLAN_HLEN to csum_start if payload holds vlanWillem de Bruijn
[ Upstream commit fd3a88625844907151737fc3b4201676effa6d27 ] Tun, tap, virtio, packet and uml vector all use struct virtio_net_hdr to communicate packet metadata to userspace. For skbuffs with vlan, the first two return the packet as it may have existed on the wire, inserting the VLAN tag in the user buffer. Then virtio_net_hdr.csum_start needs to be adjusted by VLAN_HLEN bytes. Commit f09e2249c4f5 ("macvtap: restore vlan header on user read") added this feature to macvtap. Commit 3ce9b20f1971 ("macvtap: Fix csum_start when VLAN tags are present") then fixed up csum_start. Virtio, packet and uml do not insert the vlan header in the user buffer. When introducing virtio_net_hdr_from_skb to deduplicate filling in the virtio_net_hdr, the variant from macvtap which adds VLAN_HLEN was applied uniformly, breaking csum offset for packets with vlan on virtio and packet. Make insertion of VLAN_HLEN optional. Convert the callers to pass it when needed. Fixes: e858fae2b0b8f4 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Fixes: 1276f24eeef2 ("packet: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620Alvaro Gamez Machado
[ Upstream commit b718e8c8f4f5920aaddc2e52d5e32f494c91129c ] DP83620 register set is compatible with the DP83848, but it also supports 100base-FX. When the hardware is configured such as that fiber mode is enabled, autonegotiation is not possible. The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE. Instead, this bit is always set high, even if the particular hardware configuration makes it so that auto negotiation is not possible [1]. Under these circumstances, the phy subsystem keeps trying for autonegotiation to happen, without success. Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on reset is set to 0 when auto negotiation is disabled, and so we use this value instead of BMSR_ANEGCAPABLE. [1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170 Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26cdc_ncm: avoid padding beyond end of skbBjørn Mork
[ Upstream commit 49c2c3f246e2fc3009039e31a826333dcd0283cd ] Commit 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbfcf3b ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393 Reported-by: Горбешко Богдан <bodqhrohro@gmail.com> Reported-and-tested-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: Enrico Mioso <mrkiko.rs@gmail.com> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-26bonding: re-evaluate force_primary when the primary slave name changesXiangning Yu
[ Upstream commit eb55bbf865d9979098c6a7a17cbdb41237ece951 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by: Xiangning Yu <yuxiangning@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21ixgbe: fix memory leak on ipsec allocationColin Ian King
[ Upstream commit c89ebb968f04c71e16e86c91caeacb045dc8f908 ] The error clean up path kfree's adapter->ipsec and should be instead kfree'ing ipsec. Fix this. Also, the err1 error exit path does not need to kfree ipsec because this failure path was for the failed allocation of ipsec. Detected by CoverityScan, CID#146424 ("Resource Leak") Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21ixgbe: return error on unsupported SFP module when resettingEmil Tantilov
[ Upstream commit bbb2707623f3ccc48695da2433f06d7c38193451 ] Add check for unsupported module and return the error code. This fixes a Coverity hit due to unused return status from setup_sfp. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21cxgb4: copy mbox log size to PF0-3 adap instancesGanesh Goudar
[ Upstream commit aca06eafd09f48ca4d97f3c0b2a12c8d631116f0 ] copy mbox size to adapter instances of PF0-3 to avoid mbox log overflow. This fixes the possible protection fault. Fixes: baf5086840ab ("cxgb4: restructure VF mgmt code") Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21qede: Fix gfp flags sent to rdma event node allocationMichal Kalderon
[ Upstream commit 090477e4acb31c5dd674940c7c01d4f16bd1ac41 ] A previous commit 4609adc27175 ("qede: Fix qedr link update") added a flow that could allocate rdma event objects from an interrupt path (link notification). Therefore the kzalloc call should be done with GFP_ATOMIC. fixes: 4609adc27175 ("qede: Fix qedr link update") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21qed: Fix l2 initializations over iWARP personalityMichal Kalderon
[ Upstream commit af6858ee423a309d93054c361c61099b8eb12bbf ] If qede driver was loaded on a device configured for iWARP the l2 mutex wouldn't be allocated, and some l2 related resources wouldn't be freed. fixes: c851a9dc4359 ("qed: Introduce iWARP personality") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21can: dev: increase bus-off message severityJakob Unterwurzacher
[ Upstream commit 71c23a821c6bcacba71a094efe49ee689605906b ] bus-off is usually caused by hardware malfunction or configuration error (baud rate mismatch) and causes a complete loss of communication. Increase the "bus-off" message's severity from netdev_dbg() to netdev_info() to make it visible to the user. A can interface going into bus-off is similar in severity to ethernet's "Link is Down" message, which is also printed at info level. It is debatable whether the the "restarted" message should also be changed to netdev_info() to make the interface state changes comprehensible from the kernel log. I have chosen to keep the "restarted" message at dbg for now as the "bus-off" message should be enough for the user to notice and investigate the problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: linux-can@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: aquantia: fix unsigned numvecs comparison with less than zeroColin Ian King
commit 58d813afbe89658a5972747460a5fe19dec4dbcb upstream. This was originally mistakenly submitted to net-next. Resubmitting to net. The comparison of numvecs < 0 is always false because numvecs is a u32 and hence the error return from a failed call to pci_alloc_irq_vectores is never detected. Fix this by using the signed int ret to handle the error return and assign numvecs to err. Detected by CoverityScan, CID#1468650 ("Unsigned compared against 0") Fixes: a09bd81b5413 ("net: aquantia: Limit number of vectors to actually allocated irqs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: aquantia: Limit number of vectors to actually allocated irqsIgor Russkikh
[ Upstream commit a09bd81b5413d1b4d705c6c5303b5d311069da22 ] Driver should use pci_alloc_irq_vectors return value to correct number of allocated vectors and napi instances. Otherwise it'll panic later in pci_irq_vector. Driver also should allow more than one MSI vectors to be allocated. Error return path from pci_alloc_irq_vectors is also fixed to revert resources in a correct sequence when error happens. Reported-by: Long, Nicholas <nicholas.a.long@baesystems.com> Fixes: 23ee07a ("net: aquantia: Cleanup pci functions module") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: aquantia: driver should correctly declare vlan_features bitsIgor Russkikh
[ Upstream commit 8c61ab7f111a2b29d051348b9cb9a39804ebf1f8 ] In particular, not reporting SG forced skbs to be linear for vlan interfaces over atlantic NIC. With this fix it is possible to enable SG feature on device and therefore optimize performance. Reported-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: phy: broadcom: add support for BCM89610 PHYBhadram Varka
[ Upstream commit 23b8392201e0681b76630c4cea68e1a2e1821ec6 ] It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform. Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: mvpp2: Fix clk error path in mvpp2_probeMaxime Chevallier
[ Upstream commit 45f972adb7f4db2d7f02af728ccd104113336074 ] When clk_prepare_enable fails for the axi_clk, the mg_clk isn't properly cleaned up. Add another jump label to handle that case, and make sure we jump to it in the later error cases. Fixes: 4792ea04bcd0 ("net: mvpp2: Fix clock resource by adding an optional bus clock") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21nfp: don't depend on eth_tbl being availableJakub Kicinski
[ Upstream commit c55ca688ed99a9cb79367aee2ed2ff6cb80fc039 ] For very very old generation of the management FW Ethernet port information table may theoretically not be available. This in turn will cause the nfp_port structures to not be allocated. Make sure we don't crash the kernel when there is no eth_tbl: RIP: 0010:nfp_net_pci_probe+0xf2/0xb40 [nfp] ... Call Trace: nfp_pci_probe+0x6de/0xab0 [nfp] local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x1a/0x30 process_one_work+0x1de/0x3e0 Found while working with broken/development version of management FW. Fixes: a5950182c00e ("nfp: map mac_stats and vf_cfg BARs") Fixes: 93da7d9660ee ("nfp: provide nfp_port to of nfp_net_get_mac_addr()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21igb: Fix the transmission mode of queue 0 for Qav modeVinicius Costa Gomes
[ Upstream commit 2707df9773cd2cb8b0f35b8592431b301da9d352 ] When Qav mode is enabled, queue 0 should be kept on Stream Reservation mode. From the i210 datasheet, section 8.12.19: "Note: Queue0 QueueMode must be set to 1b when TransmitMode is set to Qav." ("QueueMode 1b" represents the Stream Reservation mode) The solution is to give queue 0 the all the credits it might need, so it has priority over queue 1. A situation where this can happen is when cbs is "installed" only on queue 1, leaving queue 0 alone. For example: $ tc qdisc replace dev enp2s0 handle 100: parent root mqprio num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0 $ tc qdisc replace dev enp2s0 parent 100:2 cbs locredit -1470 \ hicredit 30 sendslope -980000 idleslope 20000 offload 1 Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: phy: marvell: clear wol event before setting itJingju Hou
[ Upstream commit b6a930fa88083b41d26ddf1cab95cbd740936c22 ] If WOL event happened once, the LED[2] interrupt pin will not be cleared unless we read the CSISR register. If interrupts are in use, the normal interrupt handling will clear the WOL event. Let's clear the WOL event before enabling it if !phy_interrupt_is_valid(). Signed-off-by: Jingju Hou <Jingju.Hou@synaptics.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21net: hns: Avoid action name truncationdann frazier
[ Upstream commit f4ea89110df237da6fbcaab76af431e85f07d904 ] When longer interface names are used, the action names exposed in /proc/interrupts and /proc/irq/* maybe truncated. For example, when using the predictable name algorithm in systemd on a HiSilicon D05, I see: ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 Increase the max ring name length to allow for an interface name of IFNAMSIZE. After this change, I now see: $ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 enahisic2i0-tx2 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx10 enahisic2i0-tx11 enahisic2i0-tx12 enahisic2i0-tx13 enahisic2i0-tx14 enahisic2i0-tx15 Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21nfp: flower: split and limit cmsg skb listsPieter Jansen van Vuuren
[ Upstream commit cf2cbadc20f5651c3dde9f5ac2ee52fb43aa4ddd ] Introduce a second skb list for handling control messages and limit the number of allowed messages. Some control messages are considered more crucial than others, resulting in the need for a second skb list. By splitting the list into a separate high and low priority list we can ensure that messages on the high list get added to the head of the list that gets processed, this however has no functional impact. Previously there was no limit on the number of messages allowed on the queue, this could result in the queue growing boundlessly and eventually the host running out of memory. Fixes: b985f870a5f0 ("nfp: process control messages in workqueue in flower app") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21nfp: ignore signals when communicating with management FWJakub Kicinski
[ Upstream commit 5496295aefe86995e41398b0f76de601308fc3f5 ] We currently allow signals to interrupt the wait for management FW commands. Exiting the wait should not cause trouble, the FW will just finish executing the command in the background and new commands will wait for the old one to finish. However, this may not be what users expect (Ctrl-C not actually stopping the command). Moreover some systems routinely request link information with signals pending (Ubuntu 14.04 runs a landscape-sysinfo python tool from MOTD) worrying users with errors like these: nfp 0000:04:00.0: nfp_nsp: Error -512 waiting for code 0x0007 to start nfp 0000:04:00.0: nfp: reading port table failed -512 Make the wait for management FW responses non-interruptible. Fixes: 1a64821c6af7 ("nfp: add support for service processor access") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21ibmvnic: Do not notify peers on parameter change resetsNathan Fontenot
[ Upstream commit ebc701b796a67a5785399dcbc83d90e3b5f1e02f ] When attempting to change the driver parameters, such as the MTU value or number of queues, do not call netdev_notify_peers(). Doing so will deadlock on the rtnl_lock. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21lan78xx: PHY DSP registers initialization to address EEE link drop issues ↵Raghuram Chary J
with long cables [ Upstream commit 1c2734b31d72316e3faaad88c0c9c46fa92a4b20 ] The patch is to configure DSP registers of PHY device to handle Gbe-EEE failures with >40m cable length. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: netsec: reduce DMA mask to 40 bitsArd Biesheuvel
[ Upstream commit 312564269535892cc082bc80592150cd1f5e8ec3 ] The netsec network controller IP can drive 64 address bits for DMA, and the DMA mask is set accordingly in the driver. However, the SynQuacer SoC, which is the only silicon incorporating this IP at the moment, integrates this IP in a manner that leaves address bits [63:40] unconnected. Up until now, this has not resulted in any problems, given that the DDR controller doesn't decode those bits to begin with. However, recent firmware updates for platforms incorporating this SoC allow the IOMMU to be enabled, which does decode address bits [47:40], and allocates top down from the IOVA space, producing DMA addresses that have bits set that have been left unconnected. Both the DT and ACPI (IORT) descriptions of the platform take this into account, and only describe a DMA address space of 40 bits (using either dma-ranges DT properties, or DMA address limits in IORT named component nodes). However, even though our IOMMU and bus layers may take such limitations into account by setting a narrower DMA mask when creating the platform device, the netsec probe() entrypoint follows the common practice of setting the DMA mask uncondionally, according to the capabilities of the IP block itself rather than to its integration into the chip. It is currently unclear what the correct fix is here. We could hack around it by only setting the DMA mask if it deviates from its default value of DMA_BIT_MASK(32). However, this makes it impossible for the bus layer to use DMA_BIT_MASK(32) as the bus limit, and so it appears that a more comprehensive approach is required to take DMA limits imposed by the SoC as a whole into account. In the mean time, let's limit the DMA mask to 40 bits. Given that there is currently only one SoC that incorporates this IP, this is a reasonable approach that can be backported to -stable and buys us some time to come up with a proper fix going forward. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Cc: Robin Murphy <robin.murphy@arm.com> Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Masahisa Kojima <masahisa.kojima@linaro.org> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11virtio-net: correctly redirect linearized packetJason Wang
[ Upstream commit 6890418bbb780f0ee9cf124055afa79777f1b4f1 ] After a linearized packet was redirected by XDP, we should not go for the err path which will try to pop buffers for the next packet and increase the drop counter. Fixing this by just drop the page refcnt for the original page. Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT") Reported-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: dsa: b53: Fix for brcm tag issue in Cygnus SoCArun Parameswaran
[ Upstream commit 5040cc990cbac98733df4d58fdeac5bbdab15b49 ] In the Broadcom Cygnus SoC, the brcm tag needs to be inserted in between the mac address and the ether type (should use 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal b53 switch. Since the Cygnus was added with the BCM58XX device id and the BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is broken, due to the incorrect brcm tag location. Add a new b53 device id (BCM583XX) for Cygnus family to fix the issue. Add the new device id to the BCM58XX family as Cygnus is similar to the BCM58XX in most other functionalities. Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reported-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11virtio-net: correctly check num_buf during err pathJason Wang
[ Upstream commit 850e088d5bbb333342fd4def08d0a4035f2b7126 ] If we successfully linearize the packet, num_buf will be set to zero which may confuse error handling path which assumes num_buf is at least 1 and this can lead the code tries to pop the descriptor of next buffer. Fixing this by checking num_buf against 1 before decreasing. Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11tun: Fix NULL pointer dereference in XDP redirectToshiaki Makita
[ Upstream commit 6547e387d7f52f2ba681a229de3c13e5b9e01ee1 ] Calling XDP redirection requires bh disabled. Softirq can call another XDP function and redirection functions, then the percpu static variable ri->map can be overwritten to NULL. This is a generic XDP case called from tun. [ 3535.736058] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 3535.743974] PGD 0 P4D 0 [ 3535.746530] Oops: 0000 [#1] SMP PTI [ 3535.750049] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ipmi_ssif irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel crypto_simd cryptd enclosure hpwdt hpilo glue_helper ipmi_si pcspkr wmi mei_me ioatdma mei ipmi_devintf shpchp dca ipmi_msghandler lpc_ich acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm smartpqi i40e crc32c_intel scsi_transport_sas tg3 i2c_core ptp pps_core [ 3535.813456] CPU: 5 PID: 1630 Comm: vhost-1614 Not tainted 4.17.0-rc4 #2 [ 3535.820127] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 3535.828732] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 3535.833740] RSP: 0018:ffffb4bc47bf7c58 EFLAGS: 00010246 [ 3535.839009] RAX: ffff9fdfcfea1c40 RBX: 0000000000000000 RCX: ffff9fdf27fe3100 [ 3535.846205] RDX: ffff9fdfca769200 RSI: 0000000000000000 RDI: 0000000000000000 [ 3535.853402] RBP: ffffb4bc491d9000 R08: 00000000000045ad R09: 0000000000000ec0 [ 3535.860597] R10: 0000000000000001 R11: ffff9fdf26c3ce4e R12: ffff9fdf9e72c000 [ 3535.867794] R13: 0000000000000000 R14: fffffffffffffff2 R15: ffff9fdfc82cdd00 [ 3535.874990] FS: 0000000000000000(0000) GS:ffff9fdfcfe80000(0000) knlGS:0000000000000000 [ 3535.883152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3535.888948] CR2: 0000000000000018 CR3: 0000000bde724004 CR4: 00000000007626e0 [ 3535.896145] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3535.903342] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3535.910538] PKRU: 55555554 [ 3535.913267] Call Trace: [ 3535.915736] xdp_do_generic_redirect+0x7a/0x310 [ 3535.920310] do_xdp_generic.part.117+0x285/0x370 [ 3535.924970] tun_get_user+0x5b9/0x1260 [tun] [ 3535.929279] tun_sendmsg+0x52/0x70 [tun] [ 3535.933237] handle_tx+0x2ad/0x5f0 [vhost_net] [ 3535.937721] vhost_worker+0xa5/0x100 [vhost] [ 3535.942030] kthread+0xf5/0x130 [ 3535.945198] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 3535.950031] ? kthread_bind+0x10/0x10 [ 3535.953727] ret_from_fork+0x35/0x40 [ 3535.957334] Code: 0e 74 15 83 f8 10 75 05 e9 49 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 29 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 49 a9 b3 ff 31 c0 c3 [ 3535.976387] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffffb4bc47bf7c58 [ 3535.982883] CR2: 0000000000000018 [ 3535.987096] ---[ end trace 383b299dd1430240 ]--- [ 3536.131325] Kernel panic - not syncing: Fatal exception [ 3536.137484] Kernel Offset: 0x26a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 3536.281406] ---[ end Kernel panic - not syncing: Fatal exception ]--- And a kernel with generic case fixed still panics in tun driver XDP redirect, because it disabled only preemption, but not bh. [ 2055.128746] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 2055.136662] PGD 0 P4D 0 [ 2055.139219] Oops: 0000 [#1] SMP PTI [ 2055.142736] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel ipmi_ssif crypto_simd enclosure cryptd hpwdt glue_helper ioatdma hpilo wmi dca pcspkr ipmi_si acpi_power_meter ipmi_devintf shpchp mei_me ipmi_msghandler mei lpc_ich sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm i40e smartpqi tg3 scsi_transport_sas crc32c_intel i2c_core ptp pps_core [ 2055.206142] CPU: 6 PID: 1693 Comm: vhost-1683 Tainted: G W 4.17.0-rc5-fix-tun+ #1 [ 2055.215011] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 2055.223617] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 2055.228624] RSP: 0018:ffff998b07607cc0 EFLAGS: 00010246 [ 2055.233892] RAX: ffff8dbd8e235700 RBX: ffff8dbd8ff21c40 RCX: 0000000000000004 [ 2055.241089] RDX: ffff998b097a9000 RSI: 0000000000000000 RDI: 0000000000000000 [ 2055.248286] RBP: 0000000000000000 R08: 00000000000065a8 R09: 0000000000005d80 [ 2055.255483] R10: 0000000000000040 R11: ffff8dbcf0100000 R12: ffff998b097a9000 [ 2055.262681] R13: ffff8dbd8c98c000 R14: 0000000000000000 R15: ffff998b07607d78 [ 2055.269879] FS: 0000000000000000(0000) GS:ffff8dbd8ff00000(0000) knlGS:0000000000000000 [ 2055.278039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2055.283834] CR2: 0000000000000018 CR3: 0000000c0c8cc005 CR4: 00000000007626e0 [ 2055.291030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2055.298227] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2055.305424] PKRU: 55555554 [ 2055.308153] Call Trace: [ 2055.310624] xdp_do_redirect+0x7b/0x380 [ 2055.314499] tun_get_user+0x10fe/0x12a0 [tun] [ 2055.318895] tun_sendmsg+0x52/0x70 [tun] [ 2055.322852] handle_tx+0x2ad/0x5f0 [vhost_net] [ 2055.327337] vhost_worker+0xa5/0x100 [vhost] [ 2055.331646] kthread+0xf5/0x130 [ 2055.334813] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 2055.339646] ? kthread_bind+0x10/0x10 [ 2055.343343] ret_from_fork+0x35/0x40 [ 2055.346950] Code: 0e 74 15 83 f8 10 75 05 e9 e9 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 c9 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 e9 a9 b3 ff 31 c0 c3 [ 2055.366004] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffff998b07607cc0 [ 2055.372500] CR2: 0000000000000018 [ 2055.375856] ---[ end trace 2a2dcc5e9e174268 ]--- [ 2055.523626] Kernel panic - not syncing: Fatal exception [ 2055.529796] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2055.677539] ---[ end Kernel panic - not syncing: Fatal exception ]--- v2: - Removed preempt_disable/enable since local_bh_disable will prevent preemption as well, feedback from Jason Wang. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net/mlx5e: When RXFCS is set, add FCS data into checksum calculationEran Ben Elisha
[ Upstream commit 902a545904c71d719ed144234d67df75f31db63b ] When RXFCS feature is enabled, the HW do not strip the FCS data, however it is not present in the checksum calculated by the HW. Fix that by manually calculating the FCS checksum and adding it to the SKB checksum field. Add helper function to find the FCS data for all SKB forms (linear, one fragment or more). Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net/mlx4: Fix irq-unsafe spinlock usageJack Morgenstein
[ Upstream commit d546b67cda015fb92bfee93d5dc0ceadb91deaee ] spin_lock/unlock was used instead of spin_un/lock_irq in a procedure used in process space, on a spinlock which can be grabbed in an interrupt. This caused the stack trace below to be displayed (on kernel 4.17.0-rc1 compiled with Lock Debugging enabled): [ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I [ 154.675856] ----------------------------------------------------- [ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core] [ 154.700927] and this task is already holding: [ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib] [ 154.718028] which would create a new lock dependency: [ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.} [ 154.731922] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 154.740798] (&(&cq->lock)->rlock){..-.} [ 154.740800] ... which became SOFTIRQ-irq-safe at: [ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50 [ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib] [ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib] ... to a SOFTIRQ-irq-unsafe lock: [ 154.815603] (&(&qp_table->lock)->rlock){+.+.} [ 154.815604] ... which became SOFTIRQ-irq-unsafe at: [ 154.827718] ... [ 154.827720] _raw_spin_lock+0x35/0x50 [ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core] [ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core] Since mlx4_qp_lookup() is called only in process space, we can simply replace the spin_un/lock calls with spin_un/lock_irq calls. Fixes: 6dc06c08bef1 ("net/mlx4: Fix the check in attaching steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11virtio-net: fix leaking page for gso packet during mergeable XDPJason Wang
[ Upstream commit 3d62b2a0db505bbf9ed0755f254e45d775f9807f ] We need to drop refcnt to xdp_page if we see a gso packet. Otherwise it will be leaked. Fixing this by moving the check of gso packet above the linearizing logic. While at it, remove useless comment as well. Cc: John Fastabend <john.fastabend@gmail.com> Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11virtio-net: correctly transmit XDP buff after linearizingJason Wang
[ Upstream commit 5d458a13dd59d04b4d6658a6d5b94d42732b15ae ] We should not go for the error path after successfully transmitting a XDP buffer after linearizing. Since the error path may try to pop and drop next packet and increase the drop counters. Fixing this by simply drop the refcnt of original page and go for xmit path. Fixes: 72979a6c3590 ("virtio_net: xdp, add slowpath case for non contiguous buffers") Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: phy: broadcom: Fix auxiliary control register readsFlorian Fainelli
[ Upstream commit 733a969a7ed14fc5786bcc59c1bdda83c7ddb46e ] We are currently doing auxiliary control register reads with the shadow register value 0b111 (0x7) which incidentally is also the selector value that should be present in bits [2:0]. Fix this by using the appropriate selector mask which is defined (MII_BCM54XX_AUXCTL_SHDWSEL_MASK). This does not have a functional impact yet because we always access the MII_BCM54XX_AUXCTL_SHDWSEL_MISC (0x7) register in the current code. This might change at some point though. Fixes: 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11team: use netdev_features_t instead of u32Dan Carpenter
[ Upstream commit 25ea66544bfd1d9df1b7e1502f8717e85fa1e6e6 ] This code was introduced in 2011 around the same time that we made netdev_features_t a u64 type. These days a u32 is not big enough to hold all the potential features. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11qed: Fix mask for physical address in ILT entryShahed Shaikh
[ Upstream commit fdd13dd350dda1826579eb5c333d76b14513b812 ] ILT entry requires 12 bit right shifted physical address. Existing mask for ILT entry of physical address i.e. ILT_ENTRY_PHY_ADDR_MASK is not sufficient to handle 64bit address because upper 8 bits of 64 bit address were getting masked which resulted in completer abort error on PCIe bus due to invalid address. Fix that mask to handle 64bit physical address. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas
[ Upstream commit 9f7c728332e8966084242fcd951aa46583bc308c ] Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: phy: broadcom: Fix bcm_write_exp()Florian Fainelli
[ Upstream commit 79fb218d97980d4fee9a64f4c8ff05289364ba25 ] On newer PHYs, we need to select the expansion register to write with setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior to being migrated to generic code under bcm-phy-lib.c which unfortunately used the older implementation from the BCM54xx days. Fix this by creating an inline stub: bcm_write_exp_sel() which adds the correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY and BCM7xxx PHY drivers which require setting these bits. broadcom.c is unchanged because some PHYs even use a different selector method, so let them specify it directly (e.g: SerDes secondary selector). Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter
[ Upstream commit 8005b09d99fac78e6f5fb9da30b5ae94840af03b ] The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAGPetr Machata
[ Upstream commit 47bf9df2e8201d07c40670e093629f8dfd1b5d9f ] VLAN 1 is internally used for untagged traffic. Prevent creation of explicit netdevice for that VLAN, because that currently isn't supported and leads to the NULL pointer dereference cited below. Fix by preventing creation of VLAN devices with VID of 1 over mlxsw devices or LAG devices that involve mlxsw devices. [ 327.175816] ================================================================================ [ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12 [ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid' [ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11 [ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 327.219872] Call Trace: [ 327.222384] dump_stack+0xc3/0x12b [ 327.234007] ubsan_epilogue+0x9/0x49 [ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0 [ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7 [ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum] [ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum] [ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum] [ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum] [ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum] [ 327.367863] notifier_call_chain+0x4c/0x150 [ 327.372128] __netdev_upper_dev_link+0x1b3/0x260 [ 327.399450] vrf_add_slave+0xce/0x170 [vrf] [ 327.403703] do_setlink+0x658/0x1d70 [ 327.508998] rtnl_newlink+0x908/0xf20 [ 327.559128] rtnetlink_rcv_msg+0x50c/0x720 [ 327.571720] netlink_rcv_skb+0x16a/0x1f0 [ 327.583450] netlink_unicast+0x2ca/0x3e0 [ 327.599305] netlink_sendmsg+0x3e2/0x7f0 [ 327.616655] sock_sendmsg+0x76/0xc0 [ 327.620207] ___sys_sendmsg+0x494/0x5d0 [ 327.666117] __sys_sendmsg+0xc2/0x130 [ 327.690953] do_syscall_64+0x66/0x370 [ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 327.699782] RIP: 0033:0x7f4c2f3f8037 [ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037 [ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003 [ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630 [ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000 [ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000 [ 327.747096] ================================================================================ Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking") Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11enic: set DMA mask to 47 bitGovindarajulu Varadarajan
[ Upstream commit 322eaa06d55ebc1402a4a8d140945cff536638b4 ] In commit 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") DMA mask was changed from 40 bits to 64 bits. Hardware actually supports only 47 bits. Fixes: 624dbf55a359b ("driver/net: enic: Try DMA 64 first, then failover to DMA") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11bnx2x: use the right constantJulia Lawall
[ Upstream commit dd612f18a49b63af8b3a5f572d999bdb197385bc ] Nearby code that also tests port suggests that the P0 constant should be used when port is zero. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1; @@ * e ? e1 : e1 // </smpl> Fixes: 6c3218c6f7e5 ("bnx2x: Adjust ETS to 578xx") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-11be2net: Fix error detection logic for BE3Suresh Reddy
[ Upstream commit d2c2725c2cdbcc108a191f50953d31c7b6556761 ] Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05Revert "rt2800: use TXOP_BACKOFF for probe frames"Stanislaw Gruszka
commit 52a192362932f333a7ebafd581c4d9b81da2fec8 upstream. This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e. In some situations when we set TXOP_BACKOFF, the probe frame is not sent at all. What it worse then sending probe frame as part of AMPDU and can degrade 11n performance to 11g rates. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05rtlwifi: rtl8192cu: Remove variable self-assignment in rf.cMatthias Kaehlcke
commit fb239c1209bb0f0b4830cc72507cc2f2d63fadbd upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30i40e: Add delay after EMP reset for firmware to recoverFilip Sadowski
[ Upstream commit 1fa51a650e1deb50410677f1bd6c0ce17aa48a49 ] This patch adds necessary delay for 4.33 firmware to recover after EMP reset. Without this patch driver occasionally reinitializes structures too quickly to communicate with firmware after EMP reset causing AdminQ to timeout. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30dpaa_eth: fix pause capability advertisement logicJake Moroni
[ Upstream commit 3021efb440d02bf5b952b6d151c7ffee9bdd49fe ] The ADVERTISED_Asym_Pause bit was being improperly set when both rx and tx pause were enabled. When rx and tx are both enabled, only the ADVERTISED_Pause bit is supposed to be set. Signed-off-by: Jake Moroni <mail@jakemoroni.com> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30net: stmmac: call correct function in stmmac_mac_config_rx_queues_routing()Niklas Cassel
[ Upstream commit 13138de01400762f706c5e956e70660770d61962 ] stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio() instead of rx_queue_routing(). This looks like a copy paste issue, since stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(), and both stmmac_mac_config_rx_queues_routing() and stmmac_mac_config_rx_queues_prio() are very similar in structure. Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30sh_eth: fix TSU init on SH7734/R8A7740Sergei Shtylyov
[ Upstream commit a94cf2a614f8bc5b2b33c708626ce695bf71e424 ] It appears that the single port Ether controllers having TSU (like SH7734/ R8A7740) need the same kind of treating in sh_eth_tsu_init() as R7S72100 currently has -- they also don't have the TSU registers related e.g. to passing the frames between ports. Add the 'sh_eth_cpu_data::dual_port' flag and use it as a new criterion for taking a "short path" in the TSU init sequence in order to avoid writing to the non-existent registers... Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734") Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-15 21:56:01 +0000