summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt76
AgeCommit message (Collapse)Author
2023-05-11wifi: mt76: mt7996: fill txd by host driverRyder Lee
[ Upstream commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209 ] The hardware SDO has issue to fill txd for the moment, so fallback to driver filling method. Fixes: 98686cd21624 (wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7996: rely on mt76_connac_txp_common structureLorenzo Bianconi
[ Upstream commit 3c38dfc1702d812f7c4a89ed5b0521e2ad8381d6 ] mt7996_txp structure is equal to mt76_connac_fw_txp one. Drop mt7996_txp and rely on mt76_connac_txp_common. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: 3b522cadedfe ("wifi: mt76: mt7996: fill txd by host driver") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: connac: fix txd multicast rate settingRyder Lee
[ Upstream commit 3d2892e05086d09aecf14ea64b2debbf495e313c ] The vif->bss_conf.mcast_rate should be applied to multicast data frame only. Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921e: stop chip reset worker in unregister hookQuan Zhou
[ Upstream commit 3d78c46423c6567ed25ca033e086865b1b4d5ae1 ] If the chip reset worker is triggered during the remove process, the chip DMA may not be properly pushed back to the idle state. This can lead to corruption of the DMA flow due to the chip reset. Therefore, it is necessary to stop the chip reset before the DMA is finalized. To avoid resetting the chip after the reset worker is cancelled, use __mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to ignore the pm mutex because the pm worker and wake worker have already been cancelled. Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921e: improve reliability of dma resetQuan Zhou
[ Upstream commit 87714bf6ed1589813e473db5471e6e9857755764 ] The hardware team has advised the driver that it is necessary to first put WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA may enter an unknown state where it cannot be polled with the right state successfully. To ensure that the DMA can work properly while a stressful cold reboot test was being made, we have reordered the programming sequence in the driver based on the hardware team's guidance. The patch would modify the WFDMA disabling flow from "DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle -> disabling DMASHDL -> DMA reset. Where he polling and waiting until WFDMA is idle is coordinated with the operation of disabling WFDMA. Even while WFDMA is being disabled, it can still handle Tx/Rx requests. The additional polling allows sufficient time for WFDMA to process the last T/Rx request. When the idle state of WFDMA is reached, it is a reliable indication that DMASHDL is also idle to ensure it is safe to disable it and perform the DMA reset. Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`Jiefeng Li
[ Upstream commit 5c47cdebbaeb7724df6f9f46917c93e53f791547 ] `mt7921u_dma_init` can only return zero or negative number according to its definition. When it returns non-zero number, there exists an error and this function should handle this error rather than return directly. Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver") Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11mt76: mt7921: fix kernel panic by accessing unallocated eeprom.dataSean Wang
[ Upstream commit 12db28c3ef31f719bd18fa186a40bb152e6a527c ] The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a Fixes: 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: fix 6GHz high channel not be scannedMing Yen Hsieh
[ Upstream commit 23792cedaff02351b57bddd8957fc917fa88f2e0 ] mt76 scan command only support 64 channels currently. If the channel count is larger than 64(for 2+5+6GHz), some channels will not be scanned. Hence change the scan type to full channel scan in case of the command cannot include proper list for chip. Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Isaac Konikoff <konikofi@candelatech.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921e: fix probe timeout after rebootQuan Zhou
[ Upstream commit c397fc1e6365a2a9e5540a85b2c1d4ea412aa0e2 ] In system warm reboot scene, due to the polling timeout(now 1000us) is too short to wait dma idle in time, it may make driver probe fail with error code -ETIMEDOUT. Meanwhile, we also found the dma may take around 70ms to enter idle state. Change the polling idle timeout to 100ms to avoid the probabilistic probe fail. Tested pass with 5000 times warm reboot on x86 platform. [4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device] [4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010 [4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110 Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: add flexible polling wait-interval supportDeren Wu
[ Upstream commit 35effe6c0c24adcf0f732bb1c3d75573d4c88e63 ] The default waiting unit is 10ms and the value is too much for data path related control. Provide a new API mt76_poll_msec_tick() to support different cases, such as 1ms polling waiting kick. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: c397fc1e6365 ("wifi: mt76: mt7921e: fix probe timeout after reboot") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7996: fix eeprom tx path bitfieldsStanleyYP Wang
[ Upstream commit 72fc0df3006ce5c109f9c68f0724e44c47b4ec7b ] Swap the tx path bitfields of band1 and band2 to read correct setting. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7996: fix pointer calculation in ie countdown eventPeter Chiu
[ Upstream commit 8b14ce24a0297175bc4ebdf26d45a22b5a33847f ] Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not include the length of general rxd. It only includes the length of firmware event rxd. Use skb->length to get the correct length. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen
[ Upstream commit d0b6f86fdbefa62fd4ad2acd1aea6c45f9b518ba ] Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: handle failure of vzalloc in mt7615_coredump_workKang Chen
[ Upstream commit 9e47dd9f64a47ae00ca0123017584c37209ee900 ] vzalloc may fails, dump might be null and will cause illegal address access later. Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk Fixes: d2bf7959d9c0 ("mt76: mt7663: introduce coredump support") Signed-off-by: Kang Chen <void0red@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()Howard Hsu
[ Upstream commit 9c97df11dfe68b548a47744ba9fa6beddcfba2bc ] If kernel do not enable CONFIG_HWMON, it may cause thermal initialization to be done with temperature value 0 and then can not transmit. This commit fixes it by setting trigger/restore temperature before checking CONFIG_HWMON. Fixes: 7d12b38ab6f6 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7915: add error message in mt7915_thermal_set_cur_throttle_state()Howard Hsu
[ Upstream commit 2f2d86309e228adfe658c9c0a23c726d8b3ce475 ] Add dev_err so that it is easier to see invalid setting while looking at dmesg. Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Stable-dep-of: 9c97df11dfe6 ("wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7915: expose device tree match tableLorenz Brun
[ Upstream commit 90fb69212c60e26ef70ed0e8532b116c7649ac88 ] On MT7986 the WiFi driver currently does not get automatically loaded, requiring manual modprobing because the device tree compatibles are not exported into metadata. Add the missing MODULE_DEVICE_TABLE macro to fix this. Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986") Signed-off-by: Lorenz Brun <lorenz@brun.one> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7996: fix radiotap bitfieldRyder Lee
[ Upstream commit 63a3724632464559d1e98d90d2c63d43ec6ef6f5 ] The 11be generation's radiotap bitfields were wrongly copy-and-pasted from 11ax driver, so fix them accordingly. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store()Dan Carpenter
[ Upstream commit cdc215c2c8d74b3c8886650e979b47f16c1f7f92 ] Drop the lock before returning -EINVAL. Fixes: ecaccdae7a7e ("wifi: mt76: mt7915: rework mt7915_thermal_temp_store()") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921: fix PCI DMA hang after rebootDeren Wu
[ Upstream commit 9270270d62191b7549296721e8d5f3dc0df01563 ] mt7921 just stop some workers and clean up chip status before reboot. In stress test, there are working activities still running at the period of .shutdown callback and that would cause some hosts cannot recover DMA after reboot. To avoid the floating state in reboot, we use mt7921_pci_remove() to fully deinit all resources. Fixes: f23a0cea8bd6 ("wifi: mt76: mt7921e: add pci .shutdown() support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: mt7921: fix wrong command to set STA channelDeren Wu
[ Upstream commit fcc51acfebb85dbc3ab1bea3ce4997d7c0a3a38d ] Should not use AND operator to check vif type NL80211_IFTYPE_MONITOR, and that will cause we go into sniffer command for both STA and MONITOR mode. However, the sniffer command would set channel properly (with some extra options), the STA mode still works even if using the wrong command. Fix vif type check to make sure we using the right command to update channel. Fixes: 914189af23b8 ("wifi: mt76: mt7921: fix channel switch fail in monitor mode") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: remove redundent MCU_UNI_CMD_* definitionsDeren Wu
[ Upstream commit 532f0482fc577a78c0086893ab39acb406ac3e65 ] clear redundent definitions only Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-05-11wifi: mt76: add missing locking to protect against concurrent rx/status callsFelix Fietkau
commit 5b8ccdfb943f6a03c676d2ea816dd38c149e920b upstream. According to the documentation, ieee80211_rx_list must not run concurrently with ieee80211_tx_status (or its variants). Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Reported-by: Brian Coverstone <brian@mainsequence.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unsetMario Limonciello
commit 09d4d6da1b65d09414e7bce61459593f3c80ead1 upstream. When the BIOS has been configured for Fast Boot, systems with mt7921e have non-functional wifi. Turning on Fast boot caused both bus master enable and memory space enable bits in PCI_COMMAND not to get configured. The mt7921 driver already sets bus master enable, but explicitly check and set memory access enable as well to fix this problem. Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-11wifi: mt76: mt7921: Fix use-after-free in fw features query.Ben Greear
[ Upstream commit 2ceb76f734e37833824b7fab6af17c999eb48d2b ] Stop referencing 'features' memory after release_firmware is called. Fixes this crash: RIP: 0010:mt7921_check_offload_capability+0x17d mt7921_pci_probe+0xca/0x4b0 ... Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/51fd8f76494348aa9ecbf0abc471ebe47a983dfd.1679502607.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-13wifi: mt76: ignore key disable commandsFelix Fietkau
commit e6db67fa871dee37d22701daba806bfcd4d9df49 upstream. This helps avoid cleartext leakage of already queued or powersave buffered packets, when a reassoc triggers the key deletion. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330091259.61378-1-nbd@nbd.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-13wifi: mt76: mt7921: fix fw used for offload check for mt7922Lorenzo Bianconi
commit eb85df0a5643612285f61f38122564498d0c49f7 upstream. Fix the firmware version used for offload capability check used by 0x0616 devices. This path enables offload capabilities for 0x0616 devices. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217245 Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/632d8f0c9781c9902d7160e2c080aa7e9232d50d.1679997487.git.lorenzo@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30wifi: mt76: connac: do not check WED status for non-mmio devicesLorenzo Bianconi
[ Upstream commit 5683e1488aa9b0805a9403d215e48fed29d6d923 ] WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 24.962913] </TASK> [ 24.962939] Modules linked in: [ 24.962981] CR2: ffff88800c223200 [ 24.963022] ---[ end trace 0000000000000000 ]--- [ 24.963087] RIP: 0010:0xffff88800c223200 [ 24.963323] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.963376] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.963458] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.963538] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.963622] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.963705] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.963788] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.963871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.963941] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.964018] note: wpa_supplicant[391] exited with irqs disabled Fixes: d1369e515efe ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c42168429453474213fa8244bf4b069de4531f40.1678124335.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-30wifi: mt76: do not run mt76_unregister_device() on unregistered hwLorenzo Bianconi
[ Upstream commit 41130c32f3a18fcc930316da17f3a5f3bc326aa1 ] Trying to probe a mt7921e pci card without firmware results in a successful probe where ieee80211_register_hw hasn't been called. When removing the driver, ieee802111_unregister_hw is called unconditionally leading to a kernel NULL pointer dereference. Fix the issue running mt76_unregister_device routine just for registered hw. Link: https://bugs.debian.org/1029116 Link: https://bugs.kali.org/view.php?id=8140 Reported-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Fixes: 1c71e03afe4b ("mt76: mt7921: move mt7921_init_hw in a dedicated work") Tested-by: Helmut Grohne <helmut@freexian.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/be3457d82f4e44bb71a22b2b5db27b644a37b1e1.1677107277.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: dma: free rx_head in mt76_dma_rx_cleanupLorenzo Bianconi
[ Upstream commit 1b88b47e898edef0e56e3a2f4e49f052a136153d ] Free rx_head skb in mt76_dma_rx_cleanup routine in order to avoid possible memory leak at module unload. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_valLorenzo Bianconi
[ Upstream commit 0b8e2d69467f78a7c9d87b452220e87012435e33 ] In order to fix a possible NULL pointer dereference in mt7996_mac_write_txwi() of vif pointer, export mt76_connac2_mac_tx_rate_val utility routine and reuse it in mt7996 driver. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7921: fix error code of return in mt7921_acpi_readAaron Ma
[ Upstream commit 888d89034f9eaeab9b5b75f13dbe35376c7dd471 ] Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: add memory barrier to SDIO queue kickDeren Wu
[ Upstream commit 5f54237ad798f41cb6a503271aa9ca47188cfb9b ] Ensure the entry has been fully updated before SDIO bus worker access it. This patch would fix potential memory risk in both mt7663s and mt7921s. Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: fix WED TxS reportingRyder Lee
[ Upstream commit 0d7084e209a9e2c924cb0d6e7f1f978db2a54127 ] The previous commit forgot to remove a leftover check. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Reported-By: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: fix switch default case in mt7996_reverse_frag0_hdr_transLorenzo Bianconi
[ Upstream commit aed8d9b506c22848add261ffad8fdabc57f21964 ] The switch default case for frame_contorl is invalid. Return -EINVAL error for it. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: dma: fix memory leak running mt76_dma_tx_cleanupLorenzo Bianconi
[ Upstream commit 3f7dda36e0b6dfa2cd26191f754ba061ab8191f2 ] Fix device unregister memory leak and alway cleanup all configured rx queues in mt76_dma_tx_cleanup routine. Fixes: 52546e27787e ("wifi: mt76: add WED RX support to dma queue alloc") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exitLorenzo Bianconi
[ Upstream commit da5b4d93e141b52c5a71d0c41a042d1bcaf70d2e ] Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exitLorenzo Bianconi
[ Upstream commit 49bd78282e79ad177d14f37f4049f0605bf92dad ] Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7921: fix invalid remain_on_channel durationDeren Wu
[ Upstream commit c36457a8f34d1e0fc55fbbd7b8b2d716af3f6289 ] round_jiffies_up() may change the duration reported from chip. We should take the real timeout for current channel privilege. Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: connac: fix POWER_CTRL command name typoShayne Chen
[ Upstream commit 0d82fc956edb67b5755cc64ac6b9aee79cfbbff0 ] Fix typo MCU_UNI_CMD_POWER_CREL to MCU_UNI_CMD_POWER_CTRL. Fixes: 779d34de055e ("wifi: mt76: connac: add more unified command IDs") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7996: update register for CFEND_RATEShayne Chen
[ Upstream commit 793445cf812506375cbe4c59d0fb9f648f716e88 ] In newer chipsets, CFEND_RATE setting has been moved to different hw module. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7996: fix chainmask calculation in mt7996_set_antenna()Shayne Chen
[ Upstream commit eb1fdb9f5a2280de6820624cd02e0863babab683 ] Fix per-band chainmask when restoring from the dev chainmask. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7921: fix channel switch fail in monitor modeDeren Wu
[ Upstream commit 914189af23b83c9a83a0137a3a40f17de7d2c618 ] When the chanctx enabled, IEEE80211_CONF_CHANGE_CHANNEL in .config() would not be called anymore. mt76 cannot control RF channel for monitor. Add monitor type set-channel flow in .change_chanctx(). Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Reviewed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: rework mt7915_thermal_temp_store()Howard Hsu
[ Upstream commit ecaccdae7a7e8f76eeb6544295ca0593c2f65a33 ] Call mt7915_mcu_set_thermal_protect() through mt7915_thermal_temp_store() to update firmware trigger/restore temp directly. Fixes: 02ee68b95d81 ("mt76: mt7915: add control knobs for thermal throttling") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: rework mt7915_mcu_set_thermal_throttlingHoward Hsu
[ Upstream commit 5ad42d19f6596e54b091827c397fdb7c091d45f7 ] This patch includes 2 changes: 1. Firmware expects to disable thermal protect first before reconfiguring. 2. Separate setting thermal_protect and setting thermal_tx_duty into different functions. These two firmware commands do not need to send together. Fixes: 34b877d972be ("mt76: mt7915: add thermal cooling device support") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after ↵Howard Hsu
init_work [ Upstream commit 7d12b38ab6f6b77198cd3a66db19587bbdd3308c ] Enable thermal management by default shall not be executed during mcu init. This causes thermal configuration being reset to the firmware default settings. Fixes: 0063b86c9120 ("mt76: mt7915e: Enable thermal management by default") Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7921: fix deadlock in mt7921_abort_rocFelix Fietkau
[ Upstream commit de19b9c83654e323d83f839a550ca4af37fea15b ] When mt7921_abort_roc is called with dev->mutex held, it can deadlock while calling cancel_work_sync(&phy->roc_work), because the work function could be waiting to acquire the mutex. Fix this by flushing the work before taking the mutex Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability()Sean Wang
[ Upstream commit 47180ecf4541146836c5307c1d5526f8ac6a5a6d ] Fixed coverity issue with resource leaks at variable "fw" going out of scope leaks the storage it points to mt7921_check_offload_capability(). Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527806 ("Resource leaks") Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: fix coverity uninit_use_in_call in ↵Deren Wu
mt76_connac2_reverse_frag0_hdr_trans() [ Upstream commit 0ffcb2a68b15bd63d5555a923ae7dfe8bfdb14a7 ] The default case for frame_contorl is invalid. We should always assign addr3 of this frame properly. Coverity error message: if (ieee80211_has_a4(hdr.frame_control)) (19) Event uninit_use_in_call: Using uninitialized value "hdr". Field "hdr.addr3" is uninitialized when calling "memcpy". memcpy(skb_push(skb, sizeof(hdr)), &hdr, sizeof(hdr)); else memcpy(skb_push(skb, sizeof(hdr) - 6), &hdr, sizeof(hdr) - 6); Fixes: 0880d40871d1 ("mt76: connac: move mt76_connac2_reverse_frag0_hdr_trans in mt76-connac module") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-03-10wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read()Ryder Lee
[ Upstream commit edb0406bda4629ef496f52eb11cbea7e92ed301b ] In the expression "map[i].qid << 24" starts as u8, but is promoted to "signed int", then sign-extended to type "unsigned long", which is not intended. Cast to u32 to avoid the sign extension. Fixes: 776ec4e77aa6 ("mt76: mt7915: rework debugfs queue info") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-07 15:52:55 +0000