| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit ffe68c3766997d82e9ccaf1cdbd47eba269c4aa2 ]
dma_free_coherent() in error path takes priv->rx_buf.alloc_len as
the dma handle. This would lead to improper unmapping of the buffer.
Change the dma handle to priv->rx_buf.alloc_phys.
Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260213164340.77272-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d03e094473ecdeb68d853752ba467abe13e1de44 ]
The ID 8086:104f is matched by both i40e and ipw2200. The same device
ID should not be in more than one driver, because in that case, which
driver is used is unpredictable. Fix this by taking advantage of the
fact that i40e devices use PCI_CLASS_NETWORK_ETHERNET and ipw2200
devices use PCI_CLASS_NETWORK_OTHER to differentiate the devices.
Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards")
Cc: stable@vger.kernel.org
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260210021235.16315-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf9cf80cab81e39701861a42877a28295ade266f ]
In commit 99537d5c476c ("net: macb: Relocate mog_init_rings() callback
from macb_mac_link_up() to macb_open()"), the mog_init_rings() callback
was moved from macb_mac_link_up() to macb_open() to resolve a deadlock
issue. However, this change introduced a tx/rx malfunction following
phy link down and up events. The issue arises from a mismatch between
the software queue->tx_head, queue->tx_tail, queue->rx_prepared_head,
and queue->rx_tail values and the hardware's internal tx/rx queue
pointers.
According to the Zynq UltraScale TRM [1], when tx/rx is disabled, the
internal tx queue pointer resets to the value in the tx queue base
address register, while the internal rx queue pointer remains unchanged.
The following is quoted from the Zynq UltraScale TRM:
When transmit is disabled, with bit [3] of the network control register
set low, the transmit-buffer queue pointer resets to point to the address
indicated by the transmit-buffer queue base address register. Disabling
receive does not have the same effect on the receive-buffer queue
pointer.
Additionally, there is no need to reset the RBQP and TBQP registers in a
phy event callback. Therefore, move macb_init_buffers() to macb_open().
In a phy link up event, the only required action is to reset the tx
software head and tail pointers to align with the hardware's behavior.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm
Fixes: 99537d5c476c ("net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260208-macb-init-ring-v1-1-939a32c14635@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3def995c4ede842adf509c410e92d09a0cedc965 ]
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown.
Fixes: e740003874ed ("octeontx2-af: Flow control resource management")
Cc: stable@vger.kernel.org
Signed-off-by: Bo Sun <bo@mboxify.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260206130925.1087588-2-bo@mboxify.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d01103fdcb871fd83fd06ef5803d576507c6a801 ]
The ID 1186:4302 is matched by both r8169 and skge. The same device ID
should not be in more than one driver, because in that case, which
driver is used is unpredictable. I downloaded the latest drivers for
all hardware revisions of the D-Link DGE-530T from D-Link's website,
and the only drivers which contain this ID are Realtek drivers.
Therefore, remove this device ID from skge.
In the kernel bug report which requested addition of this device ID,
someone created a patch to add the ID to skge. Then, it was pointed
out that this device is an "r8169 in disguise", and a patch was created
to add it to r8169. Somehow, both of these patches got merged. See the
link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=38862
Fixes: c074304c2bcf ("add pci-id for DGE-530T")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260206071724.15268-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62db84b7efa63b78aed9fdbdae90f198771be94c ]
The current error handling in cpsw_probe() has two issues:
- cpsw_unregister_ports() may be called before cpsw_register_ports() has
been executed.
- cpsw_unregister_ports() is already invoked within cpsw_register_ports()
in case of a register_netdev() failure, but the error path would call
it again.
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-1-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a5752c6dcc085a3bfc78589925182e4e98468c5 ]
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ...
Fixes: 539dda3c5d19 ("staging: dpaa2-switch: properly setup switching domains")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/SYBPR01MB78812B47B7F0470B617C408AAF74A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 594163ea88a03bdb412063af50fc7177ef3cbeae ]
In ixp4xx_get_ts_info() ixp46x_ptp_find() is called
unconditionally despite this feature only existing on
ixp46x, leading to the following splat from tcpdump:
root@OpenWrt:~# tcpdump -vv -X -i eth0
(...)
Unable to handle kernel NULL pointer dereference at virtual address
00000238 when read
(...)
Call trace:
ptp_clock_index from ixp46x_ptp_find+0x1c/0x38
ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64
ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108
__ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648
__dev_ethtool from dev_ethtool+0x160/0x234
dev_ethtool from dev_ioctl+0x2cc/0x460
dev_ioctl from sock_ioctl+0x1ec/0x524
sock_ioctl from sys_ioctl+0x51c/0xa94
sys_ioctl from ret_fast_syscall+0x0/0x44
(...)
Segmentation fault
Check for ixp46x in ixp46x_ptp_find() before trying to set up
PTP to avoid this.
To avoid altering the returned error code from ixp4xx_hwtstamp_set()
which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP
from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter
the error code. The helper function ixp46x_ptp_find() helper
returns -ENODEV.
Fixes: 9055a2f59162 ("ixp4xx_eth: make ptp support a platform driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260219-ixp4xx-fix-ethernet-v3-1-f235ccc3cd46@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c14e1ecefd9e706262ac713fd27530e3344ef85c ]
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the intel ixp4xx ethernet driver to the new API, so that
the ndo_eth_ioctl() path can be removed completely.
hwtstamp_get() and hwtstamp_set() are only called if netif_running()
when the code path is engaged through the legacy ioctl. As I don't
want to make an unnecessary functional change which I can't test,
preserve that restriction when going through the new operations.
When cpu_is_ixp46x() is false, the execution of SIOCGHWTSTAMP and
SIOCSHWTSTAMP falls through to phy_mii_ioctl(), which may process it in
case of a timestamping PHY, or may return -EOPNOTSUPP. In the new API,
the core handles timestamping PHYs directly and does not call the netdev
driver, so just return -EOPNOTSUPP directly for equivalent logic.
A gratuitous change I chose to do anyway is prefixing hwtstamp_get() and
hwtstamp_set() with the driver name, ipx4xx. This reflects modern coding
sensibilities, and we are touching the involved lines anyway.
The remainder of eth_ioctl() is exactly equivalent to
phy_do_ioctl_running(), so use that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250508211043.3388702-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 594163ea88a0 ("net: ethernet: xscale: Check for PTP support properly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd24173439c033ffb3c2a2628fcbc9cb65e62bdb ]
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70e9a5760abfb6338d63994d4de6b0778ec795d6 ]
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127125147.1642-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 878406d4d6ef85c37fab52074771cc916e532c16 ]
Currently, HCLGE_FD_AD_QID has only 10 bits and supports a
maximum of 1023 queues. However, there are actually scenarios
where the queue_id exceeds 1023.
This patch adds an additional bit to HCLGE_FD_AD_QID to ensure
that queue_id greater than 1023 are supported.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260123094756.3718516-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45be47bf5d7db0f762a93e9c0ede6cb3c91edf3b ]
As per design, AF should update the default MCAM action only when
mcam_index is -1. A bug in the previous patch caused default entries
to be changed even when the request was not for them.
Fixes: 570ba37898ec ("octeontx2-af: Update RSS algorithm index")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260216090338.1318976-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a49d2a2c37a6252c41cbdd505f9d1c58d5a3817a ]
The max_adj field in ptp_clock_info tells userspace how much the PHC
clock frequency can be adjusted. ptp4l reads this and will never request
a correction larger than max_adj.
On both sparx5 and lan969x the clock offset may never converge because
the servo needs a frequency correction larger than the current max_adj
of 200000 (200 ppm) allows. The servo rails at the max and the offset
stays in the tens of microseconds.
The hardware has no inherent max adjustment limit; frequency correction
is done by writing a 64-bit clock period increment to CLK_PER_CFG, and
the register has plenty of range. The 200000 value was just an overly
conservative software limit. The max_adj is shared between sparx5 and
lan969x, and the increased value is safe for both.
Fix this by increasing max_adj to 10000000 (10000 ppm), giving the
servo sufficient headroom.
Fixes: 0933bd04047c ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260212-sparx5-ptp-max-adj-v2-v1-1-06b200e50ce3@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 026f6513c5880c2c89e38ad66bbec2868f978605 ]
ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism.
Fixes: c5e12ac3beb0 ("net: mscc: ocelot: serialize access to the injection/extraction groups")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-4-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47f79b20e7fb885aa1623b759a68e8e27401ec4d ]
Split ocelot_port_xmit() into two separate functions:
- ocelot_port_xmit_fdma(): handles the FDMA injection path
- ocelot_port_xmit_inj(): handles the register-based injection path
The top-level ocelot_port_xmit() now dispatches to the appropriate
function based on the ocelot_fdma_enabled static key.
This is a pure refactor with no behavioral change. Separating the two
code paths makes each one simpler and prepares for adding proper locking
to the register injection path without affecting the FDMA path.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-3-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 026f6513c588 ("net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 29372f07f7969a2f0490793226ecf6c8c6bde0fa ]
Extract the PTP timestamp handling logic from ocelot_port_xmit() into a
separate ocelot_xmit_timestamp() helper function. This is a pure
refactor with no behavioral change.
The helper returns false if the skb was consumed (freed) due to a
timestamp request failure, and true if the caller should continue with
frame injection. The rew_op value is returned via pointer.
This prepares for splitting ocelot_port_xmit() into separate FDMA and
register injection paths in a subsequent patch.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260208225602.1339325-2-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 026f6513c588 ("net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c28aa8dfdf24f554d4c5d4ff7d723a95360d94a ]
DWRR (Deficit Weighted Round Robin) scheduling distributes bandwidth
across traffic classes based on per-queue cost values, where lower cost
means higher bandwidth share.
The SPX5_DWRR_COST_MAX constant is 63 (6 bits) but the hardware
register field HSCH_DWRR_ENTRY_DWRR_COST is GENMASK(24, 20), only
5 bits wide (max 31). This causes sparx5_weight_to_hw_cost() to
compute cost values that silently overflow via FIELD_PREP, resulting
in incorrect scheduling weights.
Set SPX5_DWRR_COST_MAX to 31 to match the hardware register width.
Fixes: 211225428d65 ("net: microchip: sparx5: add support for offloading ets qdisc")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210-sparx5-fix-dwrr-cost-max-v1-1-58fbdbc25652@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 943f3b8bfbf297cf74392b50a7108ce1fe4cbd8c ]
When probe fails after devlink registration, the missing devlink unregister
call causing a memory leak.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260206182645.4032737-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cdb1634de3bf197c0d86487d1fb84c128a79cc7c ]
Running ethtool repeatedly with a transceiver unknown to the driver or
firmware will cause the driver to spam the kernel logs with "unknown
xcvr type" messages which can distract from real issues; and this isn't
interesting information outside of debugging. Fix this by rate limiting
the output so that there are still notifications but not so many that
they flood the log.
Using dev_dbg_once() would reduce the number of messages further, but
this would miss the case where a different unknown transceiver type is
plugged in, and its status is requested.
Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260206224651.1491-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d2f142b1e4b203387a92519d9d2e34752a79dbb ]
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers.
Fixes: 907676b130711 ("net: hns3: use tx bounce buffer for small packets")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260205121719.3285730-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d2d574309e3ae84ee794869a5da8b4c38753a94 ]
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec.
Fixes: 54494aa5d1e6 ("octeontx2-af: Add Marvell OcteonTX2 RVU AF driver")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203050701.2616685-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c60d101a226f18e9a8f01bb4c6ca2b47dfcb15ef ]
The cpumask should not be a local variable, since its pointer is saved
to irq_desc and may be accessed from procfs.
To fix it, use the persistent mask cpumask_of(cpu#).
Cc: stable@vger.kernel.org
Fixes: 8deec94c6040 ("net: stmmac: set IRQ affinity hint for multi MSI vectors")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250318032424.112067-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Rajani Kantha <681739313@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 31a7a0bbeb006bac2d9c81a2874825025214b6d8 ]
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a46 ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cbba46934aefdfb5d171e0a95aec06c24f7ca30 ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873eeb ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8558aef4e8a1a83049ab906d21d391093cfa7e7f ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 926ede0c85e1e57c97d64d9612455267d597bb2c ]
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346c3 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed48a84a72fefb20a82dd90a7caa7807e90c6f66 ]
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7db85d579a1dccb624235534508c75fbf2dfe46 ]
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f7b ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Context + variable naming ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7b9ebcce0296e104a0d82a6b09d68564806158ff ]
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ gve_num_tx_queues() => priv->tx_cfg.num_queues and no stopped queues ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cbefe2ffa7784525ec5d008ba87c7add19ec631a ]
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code.
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Fixes: 8572aec3d0dc ("net: stmmac: Add basic EST support for XGMAC")
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-2-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The context change is due to the commit c3f3b97238f6
("net: stmmac: Refactor EST implementation")
and the proper adoption is done. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8deeefb24786ea7950b37bde4516b286c877db00 ]
This reverts commit 662404b24a4c4d839839ed25e3097571f5938b9b.
The revert is required due to the suspicion it is not good for anything
and cause crash.
Fixes: 662404b24a4c ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
[ The context change is due to the commit e25373416678
("net/mlx5e: Rewrite IPsec vs. TC block interface") in v6.6
which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 476681f10cc1e0e56e26856684e75d4678b072b2 ]
The driver's ndo_get_stats64 callback is only reporting mlx5 counters,
without accounting for the netdev stats, causing errors from the network
stack to be invisible in statistics.
Add netdev_stats_to_stats64() call to first populate the counters, then
add mlx5 counters on top, ensuring both are accounted for (where
appropriate).
Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c9cfced17365b1df8c6ae6cd5db56aebd7ed9b57 ]
We noticed a high number of rx_discards_phy events on certain servers while
running `ethtool -S`. However, this critical counter is not currently
included in the standard /proc/net/dev statistics file, making it difficult
to monitor effectively—especially given the diversity of vendors across a
large fleet of servers.
Let's report it via the standard rx_dropped metric.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241210022706.6665-1-laoar.shao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 476681f10cc1 ("net/mlx5e: Account for netdev stats in ndo_get_stats64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 05faf2c0a76581d0a7fdbb8ec46477ba183df95b ]
Since the beginning, the Intel ice driver has counted receive checksum
offload mismatches into the rx_errors member of the rtnl_link_stats64
struct. In ethtool -S these show up as rx_csum_bad.nic.
I believe counting these in rx_errors is fundamentally wrong, as it's
pretty clear from the comments in if_link.h and from every other statistic
the driver is summing into rx_errors, that all of them would cause a
"hardware drop" except for the UDP checksum mismatch, as well as the fact
that all the other causes for rx_errors are L2 reasons, and this L4 UDP
"mismatch" is an outlier.
A last nail in the coffin is that rx_errors is monitored in production and
can indicate a bad NIC/cable/Switch port, but instead some random series of
UDP packets with bad checksums will now trigger this alert. This false
positive makes the alert useless and affects us as well as other companies.
This packet with presumably a bad UDP checksum is *already* passed to the
stack, just not marked as offloaded by the hardware/driver. If it is
dropped by the stack it will show up as UDP_MIB_CSUMERRORS.
And one more thing, none of the other Intel drivers, and at least bnxt_en
and mlx5 both don't appear to count UDP offload mismatches as rx_errors.
Here is a related customer complaint:
https://community.intel.com/t5/Ethernet-Products/ice-rx-errros-is-too-sensitive-to-IP-TCP-attack-packets-Intel/td-p/1662125
Fixes: 4f1fe43c920b ("ice: Add more Rx errors to netdev's rx_error counter")
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Jake Keller <jacob.e.keller@intel.com>
Cc: IWL <intel-wired-lan@lists.osuosl.org>
Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d7ba71e46216b8657a82ca2ec118bc93812a4d0 ]
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef4a ("rocker: introduce worlds infrastructure")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f979d1f312627b31d2ee1e46f9692e442610cd ]
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba18195d ("net: mvpp2: cls: Report an error for unsupported flow types")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 108948f723b13874b7ebf6b3f1cc598a7de38622 ]
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d998b0e5afffa90d0f03770bad31083767079858 upstream.
0 is a valid DMA address [1] so using it as the error value can lead to
errors. The error value of dma_map_XXX() functions is DMA_MAPPING_ERROR
which is ~0. The callers of otx2_dma_map_page() use dma_mapping_error()
to test the return value of otx2_dma_map_page(). This means that they
would not detect an error in otx2_dma_map_page().
Make otx2_dma_map_page() return the raw value of dma_map_page_attrs().
[1] https://lore.kernel.org/all/f977f68b-cec5-4ab7-b4bd-2cf6aca46267@intel.com
Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260114123107.42387-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 19e4175e997a5b85eab97d522f00cc99abd1873c ]
This commit adds error handling and rollback logic to
rvu_mbox_handler_attach_resources() to properly clean up partially
attached resources when rvu_attach_block() fails.
Fixes: 746ea74241fa0 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260121033934.1900761-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8215794403d264739cc676668087512950b2ff31 ]
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a54 ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f87e034d16e43af984380a95c32c25201b7759a7 ]
Use next_input_key instead of counter_id to set HCLGE_FD_AD_NXT_KEY.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d57c67c956a1bad15115eba6e59d77a6dfeba01d ]
HCLGE_FD_AD_COUNTER_NUM_M should be at GENMASK(19, 13),
rather than at GENMASK(20, 13), because bit 20 is
HCLGE_FD_AD_NXT_STEP_B.
This patch corrects the wrong definition.
Fixes: 117328680288 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ab9b218a1521133a4410722907fa7189566be9bc ]
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364f3 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c158f985cf6c2c36c99c4f67af2ff3f5ebe09f8f ]
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5629f8859dca7ef74d7314b60de6a957f23166c0 ]
Profile rollback can fail in mlx5e_netdev_change_profile() and we will
end up with invalid mlx5e_priv memset to 0, we must maintain the
'destroying' bit in order to gracefully shutdown even if the
profile/priv are not valid.
This patch maintains the previous state of the 'destroying' state of
mlx5e_priv after priv cleanup, to allow the remove flow to cleanup
common resources from mlx5_core to avoid FW fatal errors as seen below:
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg: mlx5_core 0000:00:03.0 enp0s3np0: failed to rollback to orig profile, ...
$ devlink dev reload pci/0000:00:03.0
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: poll_health:803:(pid 519): Fatal error 3 detected
mlx5_core 0000:00:03.0: firmware version: 28.41.1000
mlx5_core 0000:00:03.0: 0.000 Gb/s available PCIe bandwidth (Unknown x255 link)
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_health_try_recover:340:(pid 141): handling bad device here
mlx5_core 0000:00:03.0: mlx5_handle_bad_state:285:(pid 141): Expected to see disabled NIC but it is full driver
mlx5_core 0000:00:03.0: mlx5_error_sw_reset:236:(pid 141): start
mlx5_core 0000:00:03.0: NIC IFC still 0 after 4000ms.
Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260108212657.25090-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4b5bdabb5449b652122e43f507f73789041d4abe ]
The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE
is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will
be greater than 0xFFFF, thus causing a build warning.
This will not cause any practical issues because ENETC is currently only
used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch
is only for fixing the build warning that occurs when compiling ENETC
drivers for other platforms.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/
Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ]
Fix the max number of bits passed to find_first_zero_bit() in
bnxt_alloc_agg_idx(). We were incorrectly passing the number of
long words. find_first_zero_bit() may fail to find a zero bit and
cause a wrong ID to be used. If the wrong ID is already in use, this
can cause data corruption. Sometimes an error like this can also be
seen:
bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1
Fix it by passing the correct number of bits MAX_TPA_P5. Use
DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity
check to warn if a bit cannot be found and reset the ring [MChan].
Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Srijit Bose <srijit.bose@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fea2993aecd74d5d11ede1ebbd60e478ebfed996 ]
Move the reset helpers, subsequent patches will need some
of them on the Tx path.
While at it rename bnxt_sched_reset(), on more recent chips
it schedules a queue reset, instead of a fuller reset.
Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.org
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ffeafa65b2b2 ("bnxt_en: Fix potential data corruption with HW GRO/LRO")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 144297e2a24e3e54aee1180ec21120ea38822b97 ]
Dumping module EEPROM on newer modules is supported through the netlink
interface only.
Querying with old userspace ethtool (or other tools, such as 'lshw')
which still uses the ioctl interface results in an error message that
could flood dmesg (in addition to the expected error return value).
The original message was added under the assumption that the driver
should be able to handle all module types, but now that such flows are
easily triggered from userspace, it doesn't serve its purpose.
Change the log level of the print in mlx5_query_module_eeprom() to
debug.
Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
